Reset to default configuration on WLSM

I was configuring AAA on my WLSM and managed to negate console access , how do i reset the WLSM module ot its default cocnfiguration, or at the very least, get the password recovery script needed to get access to my WLSM back!

Hi
It seems like i have the same problem getting Tacacs login to work, i i try to type in
"aaa authentication login default group tacacs+ enable none"
Then i will loos access to the WLSM, however i have not saved my config so i can just restart the module.
have you any new information about AAA for console access ??

Similar Messages

Reset non-default parameters in configure dialog of the mapping

OWB 9.0.4
Why after Reconcile inbound on table or cube in any mapping is reset non-default parameters (ex. hints, database link) in configure dialog of the mapping?

Dmitry,
The behavior is intended... And the reason for that is: we could not change it, but then sometimes you do want to change it, sometimes you don't. We could provide flexibility, but then you may have to answer or confirm the selection... which you don't want to do too often. In this case we change, and I am hoping it does not create too many issues for you. Let us know if it does, and we can evaluate the enhancement request.
Thanks,
Mark.

The synchronisation of iphone 4S to windows 7/64 bit does no longer work; kalender, individual ringtones and contacts get not sychronized in both directions. I tried reset on working configuration, deinstallation of itunes - nothing worked

The synchronisation of iphone 4S to windows 7/64 bit does no longer work; kalender, individual ringtones and contacts get not sychronized in both directions. I tried reset on working configuration, deinstallation of itunes - nothing worked - what can be done to solve?

Couple of things to check:
You are using Outlook 2003, 2007 or 2010
You have selected to sync Calendars and Contacts with Outlook on the Info tab of your iTunes sync settings
You have selected your Outlook calendar as the default claendar on your iPhone (in Settings>Mail,Contacts,Calendars>Default Calendar)
If all that is correct and iTunes still won't sync correctly, you might have to try reinstalling Outlook. Another option is to enable iCloud syncing with Outlook (see http://www.apple.com/icloud/setup/). This requires Outlook 2007 or 2010. If you decide to sync using iCloud but sure to disable contacts and calendar syncing in iTunes on the Info tab of your sync settings. Do not try to sync with both Outlook and iCloud or you will end up with duplicates in your contacts and calendar.
For syncing Ringtones confirm that:
The file is really a ringtone (right-click the file in iTunes, select Get Info, on the Summary tab it should say "Kind: Ringtone".
You have checked each of the ringtones you want to sync
You have checked "Sync only checked songs and videos" on the Summary tab of your iTunes sync settings
You have checked Sync Tones on the Tones tab of your iTunes sync settings

Custom View not visible in Overview page as AB unless "Reset to Default"

Hi Experts,
I am facing a strange issue here.
I enhanced the component TPMOE and created a custom view ZTRADESPENDEXCEPTION in it.
Now i have added this view as assignment block in all 6 configuration available for the overview page.
I have redefined the DETACH_STATIC_OVW_VIEWS and REATTACH_STATIC_OVW_VIEWS.
The issue i am facing is that my view assignment block is not visible to the user unless he/she goes to the personalization of the overview page and hits "Reset to Default". Once this is done, later on users can change there personalizations and everything works fine.
Now i am not sure i can go and tell all end users to go to personalization of the TPMOE overview page and click on "Reset to Default".
Is there any other way i can show my view to the end users?
I have done this on the lines of overview page layout changing when you select product planning basis while creating Trade Promotions.
Thanks and Regards
Gaurav Kumar Raghav

Hi Amar,
My coding is given below.
In DETACH_STATIC_OVW_VIEWS, the coding is:
Call Super Method
ls_viewid-view_id = '<My View Name>'.
Append ls_viewid to rt_view_id
In REATTACH_STATIC_OVW_VIEWS, the coding is:
Call Super Method
if <flag> = 'X'.
ls_viewid-view_id = '<My View Name>'.
Append ls_viewid to rt_return.
endif.
In debug mode, the coding get executed correctly and my view is returned for attachement.
For each user, the first time, i need to say "Reset to Default".
After that it works fine, my view is displayed.
Is the program "BSP_DLC_DELETE_PERSONALIZATION" a good solution to my problem?
Thanks and Regards
Gaurav Kumar Raghav

2602e Reset to Defaults Except IP not Work over Web GUI

Hello,
1. Set a Static IP
2. Apply & Save Configuration
3. After Reboot the IP is correct.
Then do Reset to Defaults Except IP in the WEB Gui.
After Reboot the AP loos the static IP and get a DHCP Address.
Reset to Defaults Except IP = Reset to Defaults !
Whats Wrong ?

OK, here is:
Writing out the event log to flash:/event.log ...
*Jan 22 17:44:56.675: %SYS-7-NV_BLOCK_INIT: Initialized the geometry of nvram
*Jan 22 17:44:57.547: %SYS-5-RELOAD: Reload requested by on console. Reload Reason: Reload Command.
Write of event.log done
IOS Bootloader - Starting system.
flash is writable
FLASH CHIP: Numonyx Mirrorbit (0089)
Xmodem file system is available.
flashfs[0]: 212 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31997952
flashfs[0]: Bytes used: 15058432
flashfs[0]: Bytes available: 16939520
flashfs[0]: flashfs fsck took 23 seconds.
Reading cookie from SEEPROM
Base Ethernet MAC address: 10:f3:11:c2:2e:3a
Ethernet speed is 1000 Mb - FULL Duplex
Loading "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-mx.152-4.JB3a"...##########################
File "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-mx.152-4.JB3a" uncompressed and installed, entry point: 0x2003000
executing...
Secondary Bootloader - Starting system.
Tide MB - 32MB of flash
Xmodem file system is available.
flashfs[0]: 212 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31997952
flashfs[0]: Bytes used: 15058432
flashfs[0]: Bytes available: 16939520
flashfs[0]: flashfs fsck took 14 seconds.
Base Ethernet MAC address: 10:f3:11:c2:2e:3a
Boot CMD: 'boot flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-xx.152-4.JB3a;flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-mx.152-4.JB3a'
Loading "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-xx.152-4.JB3a"...#######################################
File "flash:/ap3g2-k9w7-mx.152-4.JB3a/ap3g2-k9w7-xx.152-4.JB3a" uncompressed and installed, entry point: 0x1003000
executing...
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, C3600 Software (AP3G2-K9W7-M), Version 15.2(4)JB3a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 23-Dec-13 08:11 by prod_rel_team
Tide MB - 32MB of flash
Initializing flashfs...
flashfs[3]: 212 files, 7 directories
flashfs[3]: 0 orphaned files, 0 orphaned directories
flashfs[3]: Total bytes: 31739904
flashfs[3]: Bytes used: 15058432
flashfs[3]: Bytes available: 16681472
flashfs[3]: flashfs fsck took 12 seconds.
flashfs[3]: Initialization complete.
flashfs[4]: 0 files, 1 directories
flashfs[4]: 0 orphaned files, 0 orphaned directories
flashfs[4]: Total bytes: 11999232
flashfs[4]: Bytes used: 1024
flashfs[4]: Bytes available: 11998208
flashfs[4]: flashfs fsck took 0 seconds.
flashfs[4]: Initialization complete.
Copying radio files from flash: to ram:
Copy in progress...CCCCC
Copy in progress...CCC
Copy in progress...CCCC
Copy in progress...CCCC
Copy in progress...CC
Copy in progress...CCC
Copy in progress...CC
Copy in progress...CCCCC
Uncompressing radio files...
...done Initializing flashfs.
Radio0 present 8764 8000 0 A8000000 A8010000 0
Rate table has 650 entries (20 legacy/224 11n/406 11ac)
POWER TABLE FILENAME = ram:/B2.bin
Radio1 present 8764 8000 0 88000000 88010000 4
POWER TABLE FILENAME = ram:/B5.bin
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-SAP2602E-E-K9 (PowerPC) processor (revision A0) with 204790K/57344K bytes of memory.
Processor board ID FGL1711Z6K6
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
1 Gigabit Ethernet interface
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 10:F3:11:C2:2E:3A
Part Number                          : 73-14511-02
PCA Assembly Number                  : 800-37898-01
PCA Revision Number                  : A0
PCB Serial Number                    : FOC17093TXF
Top Assembly Part Number             : 800-38357-01
Top Assembly Serial Number           : FGL1711Z6K6
Top Revision Number                  : A0
Product/Model Number                 : AIR-SAP2602E-E-K9
Press RETURN to get started!
*Mar 1 00:00:16.035: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-table No such file or directory
*Mar 1 00:00:16.151: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed (11)APAVC: WlanPAKs 18174 RadioPaks 17566
*Mar 1 00:00:23.131: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 (4)
*Mar 1 00:00:29.443: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 (4)
*Mar 1 00:00:29.503: initializing dot11 onplus
*Mar 1 00:00:29.667: not a autoconfig enabled device!!!
*Mar 1 00:00:31.671: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:32.671: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Mar 1 00:01:18.015: Starting Ethernet promiscuous mode
*Jan 22 17:44:57.000: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Jan 22 17:44:57.000: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to administratively down
*Jan 22 17:44:57.007: %CDP_PD-4-POWER_OK: Full power - HIGH_POWER inline power source
*Jan 22 17:44:57.015: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3600 Software (AP3G2-K9W7-M), Version 15.2(4)JB3a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 23-Dec-13 08:11 by prod_rel_team
*Jan 22 17:44:57.015: %SNMP-5-COLDSTART: SNMP agent on host ap is undergoing a cold start
*Jan 22 17:44:57.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Jan 22 17:44:57.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Jan 22 17:44:57.999: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to downERROR: Failed to configure ethernet promiscuous mode. Interface Descriptor mismatch
*Jan 22 17:45:01.667: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed (0-0)
*Jan 22 17:45:01.667: DPAA Initialization Complete
*Jan 22 17:45:01.667: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited
*Jan 22 17:45:02.667: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Jan 22 17:45:06.863: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.16.33.216, mask 255.255.254.0, hostname ap

I have no navigation bar and firefox will not open in safe mode to reset to default config. Reinstalling doesn't work. Any help please.

I have no navigation bar ever since I closed it to gain more space on the screen. It won't re-open. Firefox will not open in safe mode, but opens immediately in normal mode with the new improper config, so I cannot reset to default config. I erased Firefox and re-installed and it still opens with the same faulty config. Why does Firefox not give me the safe mode dialog box, why can I not re-open the nav bar, and how can I do these two things, please? Firefox is currently unusable for me without a nav bar and without access to the default settings in safe mode. I cannot research the extensions I'm running since I have no nav bar to go to Tools, Add-ons, Extensions.
== This happened ==
Every time Firefox opened
== I closed the navigation bar to gain more space on the screen and I couldn't re-open it. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

Hit the '''Alt''' key to show the Menu bar, then open View > Toolbars and select Menu bar and Navigation bar, so they have a check-mark.

Firefox Crashing/Freezing Constantly and Resetting to Defaults

For the past few weeks, I have been having a lot of issues with Firefox crashing. Every time I try to open up a new tab or load a web page it will freeze. Sometimes this is only for a few minutes, while other times this lasts up to an hour and I have no choice but to close the program out using the task manager, as any attempts to close it normally fail. This is most prevalent within the first few minutes after I launch Firefox, and the program has been slow in this regard for quite a while, though usable after waiting a few minutes for it to fully load. As I stated though, for the past few weeks it has been completely locking up and crashing when this happens, and it continues to happen after I have already loaded web pages and try to open new ones.
I tried a complete fresh install, and the problem was fixed for a few days, however, after going for a couple of days without internet access and trying to get online again, the problem returned even worse than before. More than that, now from time to time my Firefox completely resets to default settings, clearing out my "New Tab" page's pinned tabs, as well as removing whichever theme I had applied.
This glitch has rapidly made Firefox unusable for me, which makes me very upset as I far prefer it to Google Chrome. While I don't know that it would help discern the issue, below is also a list of all the extensions I have installed as well as the plugins I have that are always active, (with all my other plugins either being disabled or "ask to activate"). With the exception of "Adblock Edge", I have had all the extensions installed for several months with no issues. "Adblock Edge" itself I only installed after uninstalling and reinstalling Firefox to try and fix my issue. My current Firefox version is 35.
Extensions:
Adblock Edge 2.1.7
DownloadHelper 4.9.24
Private Tab 0.1.7.3
Adblock Plus 2.6.7
Plug Ins:
Shockwave Flash 16.0.0.296
Unity Player 4.6.1.51269

Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

Firefox 3.6.8 will not start. I have to go to safe start, click reset to default, ok, then the shutdown box appears, I click cancel and it will open. I have rest profile, uninstalled and reinstalled, clicked alll he boxes on safe start, tried an older ver

Firefox 3.6.8 will not start. I have to go to safe start, click reset to default, ok, then the shutdown box appears, I click cancel and it will open. I have rest profile, uninstalled and reinstalled, clicked alll he boxes on safe start, tried an older version need help. in English
== This happened ==
Every time Firefox opened
== either after I last updated to 3.6.6 or .7 or reset my inernet exploerer values to default

I had same problem where Firefox 3.6.8 would not start or open. Spent many hours trying different things to fix it. Uninstall of previous version and reinstall did not make any difference. Finally, after uninstalling Firefox, I searched for Firefox folders and files on my computer, deleted and removed all Firefox folders and files - deleted anything and everything related to Firefox so that it will be as if I was going to download Firefox for the first time ever. Then, using another browser, I downloaded Firefox 3.6.8 and installed it. It could be that some Add-Ons or something else from the older version of Firefox or profile was interfering with the new one. It was easier to delete remove everything and install all over again clean than to figure out which part was causing the problem.
Keep in mind, when you delete all Firefox folders and files from your computer, you are deleting all your bookmarks and all your Add-ons. If you want to keep those bookmarks, you might want to save the URLs someplace safe to bookmark them again before deleting them. You need to re-install the Add-ons also. Upon installation, it asks if you want to import bookmarks and settings from another browser or settings you might have. I imported them from my other browser. Now, Firefox works. I also installed up-to-date Add-ons.
I hope this helps. Always keep more than one browser functioning on your computer, just in case one fails.

The back button no longer works. I have disabled all add-ons, rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

the back button no longer works. I have disabled all add-ons,rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

10.5.8 Finder resets to default, desktop files gone!

The Finder on my 2008 Mac pro is really acting up at the moment an I have no idea what's going on.
My desktop has been wiped clean. Nothing there, except the drive icons. I don't keep much on the desktop but there should be a few folders and files that I always keep there for convenience. Also, Finder has reset to default settings - lost my custom Places from the sidebar and opens in icon view, which I never use.
I looked at the actual folder in Finder as well and the files are definitely not there.
What I have been doing:
I ran iDefrag on my files disk (INT HD 1TB) a few days ago (first time). I forgot to turn off Time Machine so they have probably been running at the same time.
Today Time Machine decided to backup everything from scratch, which I attribute to iDefrag switching everything around on my Files disk. Also filled the backup disk so I only have two backups at the moment, both from today.
Other than that, I have mostly been using Adobe Bridge, Photoshop and InDesign CS4 for editing quite big files. Also Firefox for normal web browsing.
Hard drives are reported to be ok. Profile is still the same name. The files are not in the Trash. Everything else is where it should be. System disk is 1/3 full. Files HD (which hasn't been affected AFAICS) 1 TB 1/2 full.
Does anyone know what could be happening to my machine?

I had the same problem and finally discovered that somehow my Desktop folder had become a Package. I could not do anything on the desktop but the apps and the dock etc. were working fine. I went to Go/Home Folder/Desktop/Show Package Contents and everything was there. But nothing appeared on the desktop. I could not open a new folder and anything I tried to drag to the desktop resulted in a permissions error. I tried all of the above fixes and more. The solution? Trash the desktop folder from your Home folder, empty the trash, reboot and start all over again. If you're lucky like I was you will have a Time Machine backup and you can restore a previous Desktop easily. Worked for me!

Windows 8.1 (running in VMware Fusion 6) keeps resetting my default program associations after rebooting

I tried to set Google Chrome as my default browser in Windows 8.1 (virtual machine running in VMware Fusion 6) but somehow mysteriously failed over and over again.
According to Control Panel\Programs\Default Programs\Set Default Programs\Set Program Associations, there are 19 possible associations for Google Chrome:
Extensions: .htm, .html, .shtml, .webp, .xht, .xhtml;
Protocols: FTP, HTTP, HTTPS, IRC, MAILTO, MMS, NEWS, NNTP, SMS, SMS, SMSTO, TEL, URN, WEBCAL
I have no problem selecting some of them, or "set this program as default" so that "this program has all its defaults." (I am the only admin user, but not the builtin admin account.)
However, after restarting the VM, the program associations for Google Chrome will reset on its own. Specifically,
"this program has all its defaults" becomes "this program has 14 out of 19 defaults", losing the following five crucial protocols:
FTP, HTTP, HTTPS, MAILTO, NEWS
And these protocols simply hang there unassociated—they don't belong to IE either.
So I am extremely confused; how could the system reset my default program associations? What's wrong?
In case it is relevant, I will also post my VMware Fusion VM Default Applications settings here. All of the options are unchecked: "Open your Mac files and links using Windows applications"; "Open your Windows files and links using Mac applications";
"Run Windows applications from your Mac's Applications folder."
Thank you for your time.

Hi,
I have the same issue, and I've posted on the vmware forums with no responses other than another person having the same issue.
Have you been able to fix this? I tried importing the same VM into Parallels and the problem goes away. If I do a manual uninstall of Fusion (and remove VMWare tools from the VM), and then reinstall both, the problem goes away - temporarily. I had a few
good months, and it started again. Followed the procedure mentioned, and it went away again, but only survived a few reboots.
FYI, it's definitely not an issue with Chrome, as I'm having the same issue with Firefox (although I can duplicate on chrome as well).
Have you figured anything out?
Thanks!

How can I reset the DEFAULT zoom view in Firefox at 125%, like IE, so I don't have to reset it every time ?

How can I reset the DEFAULT zoom view in Firefox at 125%, like IE, so I don't have to reset it every time ?
I have seen this question asked previously and it seems there is no answer.
I know that one can change each individual web page (that reset defaults back to 100%) and, alternatively and apparently one can load an add-on to fix the default size at Full Zoom.
... But any hints on how to achieve a DEFAULT 125% zoom would be much appreciated.

Press CTRL + 0
Have you tried Firefox's zoom feature? Font size and zoom - increase the size of web pages
You can "zoom" all sites using this add-on: [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint]. After setting your global zoom level, you can still fine-tune the zoom on individual sites.
After installing NoSquint, click the % on the Add-on Bar to call up site preferences, then click the Global Settings button, then the Zooming tab.
If you don't have the Add-on Bar displayed, you can right-click the new tab button ("+") or a blank area of the tab bar to the right of it and choose Add-on Bar from the shortcut menu.
You can experiment with sizes larger than 125%, but I wouldn't go much higher than 150% unless you have a large high-resolution monitor.
If there are particular sites that still present a problem, feel free to post their URLs.
You can find more information about the zoom features Firefox offers in these articles:
[[Text zoom]] - For zooming text only
[[Page zoom]] - For zooming the whole page (including images etc.)

Setting Default Configuration in 1.4.2

Previous versions of Java Web Start had a default configuration file javaws.cfg which contained the default preferences. When JWS was installed on PCs in our intranet, we could switch the cfg file to one which, amongst other things, set the proxy correctly and disabled shortcut creation. Then when any other user logged on to the PC, they would get a copy of this cfg file.
But in JWS 1.4.2 there no longer seems to be a default cfg file. When a user logs on they get defaults which are incorrect for our environment. This is a problem when several different users share the same PC. Whenever a new user logs on to the PC and uses Java Web Start, we must set up the preferences manually.
Our users are in a call center and are not capable of setting preferences themselves. In fact in the past we have removed the JWS icon from the desktop because we don't want them to even know it exists. All they know how to do is click a link (to a jnlp document) on a web page.
Is there some way to set the default preferences at install time that I've missed?
Thanks,
Simon.

Educated guesswork mostly; read over the JavaOne "whats new with web start" to get a feel for the changes yourself (http://servlet.java.sun.com/javaone/sf2003/conf/sessions/display-1486.en.jsp). Several things here will lead to internal changes. While it's location isn't likely to change (they're in the right place now - in the user profile dir) the contents, structure and config files certainly will.
Biggest single change is the unification of Java Plugin and Web Start, according to the slides this includes the merging of the applet & web start caches and configuration dialogs (it's not a big leap to assume this means merging their config files also). The new 1.5 Jar Hyper Compression format will also doubtless come into play changing the very format of the Jars getting cached. The other big change is to the security system - both opening up the sandbox model and a new central administration system will mean that the preferences on a users machine may be overridden at any time by the administrator. The cache structure itself undergos a big change with the new 'System Cache' - given that users cannot read from another users profile, this system cache will need to be stored in some shared directory elsewhere. A move that will split normal operation into a pair of active caches further obfuscates assumptions about the internal structure somewhat. This only scratches the surface here - needless to say, big changes ahead.
For the 'system cache' It'll be interesting to see how the web start team get around the default privileges assigned to a domain user under XP typically doesn't allow writing to a directory outside of their user profile folder (default privs are restricted). Similarly I'd like to see how well the new JNLP file associations work out in a similar scenario. Adding a file association requires writing to the registry; this again is typically a prohibited operation requiring local administrator rights to the machine. I hope the web start team have come up with answers to these problems and not just take the Java update line of only working while the user is logged on as a local administrator (http://www.javadesktop.org/forums/thread.jspa?threadID=184&tstart=0). This severely limits your user base to non-networked single user machines (home users), the network admins machine and windows 98 & me boxes which don't share the security model.
Finally it's not a good idea to make any assumptions about the internal layout and contents of any of Sun's undocumented services, it's always going to be prone to change without warning. Developers make changes to these at their own peril and only have themselves to blame when their code suddenly stops working.
- Richard

Load default configuration in BIOS to fix sound, caused another problem

Hey !
I have had problem to get sound in my T61, and used Lenovo support, Troubleshooting, to fix it.
I did as it told in Lenovo Support.
In BIOS Setup utility menu setup I pressed F9.
Then I selected YES to load the default configuration.
After that I pressed F10 key and YES to save the configuration.
But after that when I start the computer it says that a failur has occured, and windows has shot down to avoid problems with the computer.
Is there any way of going back in the BIOS setup, so I should get it work again ?
Thanks in advance/ Kurt
Moderator edit: Subject edited for clarity.

Hi !
I solved it with money !
I went to a company, and they fixed it, Don't ask me how ! I did not understand when they described it.
Anyway I have another problem with the sound, as you can see in the other message !
They tried to fix that to, but could not solve the problem.
George

How to reset to default setting pse8?

how to reset to default setting pse8?

Please follow these steps for both editor and organzier to reset them to their defaults.
Close Elements.
Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor or Organizer.
Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.

Reset to default configuration on WLSM

Similar Messages

Maybe you are looking for