Reset to 'default' for all printing functions in about:config doesn't work.

I have followed the instructions for resetting FFox printer interface to "default", where it should normally be, to the letter: http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer
The system keeps flipping all the printer settings back to "User". Somehow it went into "User" setting 2 weeks ago, and I was able to correct the problem for a few days by following the instructions on the web page above, resetting just the print.print_printer line, alone. Now, ALL the other "print" lines below this will NOT remain in "default" mode once I've closed the about:config page (tab), or closed the browser and re-opened it, under any circumstances. The problem manifests as: When I try to print, starting from ANY true print command location and finally clicking "OK" to begin printing, I get a small rectangular box saying only, " an unknown error occurred while printing". The box has one of those yellow triangular signs with an exclamation point in it, if that helps. There's no error no. If there's something about the WAY I'm supposed to close the about:config tab, and/or close the browser that is SPECIFIC, I hope someone here can tell me the way I'm supposed to execute this. Thank you.

1) Any chance that printer shows as "offline" in the printers window in the Control Panel?
2) Local or network printer?

Similar Messages

  • How do I change Default search engine in the address bar, not the search window on the top right or by using about:config, doesn't work. Worked fine until this FF 8.0 update, now defaults to Yahoo 7. About to throw it in and use Chrome.

    When Firefox 8.0 installed it has automatically changed my address bar default search engine to Yahoo7 which is crap. I can not change this back. So when I start FF it opens to my google home page, when I type a subject and search the results are displayed in a Yahoo 7 results page, not google. I am not talking about my default home page or the search bar to the top right. This is still google.
    The settings in about:config do nothing.
    This was fine until FF 8.0.

    Thanks dmcritchie,
    Nice effort but that answers a different question about fixing the add-on Yahoo toolbar.
    Pernich and I want to know; If you type search criteria directly into the address bar and hit enter, how to change that search engine from Yahoo to Google.
    Otherwise I too will go back to using Google Chrome, even though I really like FF8.0
    please help

  • The back button no longer works. I have disabled all add-ons, rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

    the back button no longer works. I have disabled all add-ons,rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    *Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

  • My Ipad2 won't turn off.  I've tried the reset method,  holding both buttons down for at least 10 seconds, but this doesn't work. I'm on version 5.1.1 and all other functions work except that I cannot get onto the internet via wi-fi either.  Help ??

    My Ipad2 won't turn off.  I have tried the reset method by holding both buttons down for at least 10 seconds, but this doesn't work.  I can't get onto the internet via wi-fi either (don't have a 3G card fitted).  All other functions seem to be working OK including charging. Not had this problem before, but I recently upgraded software to 5.1.1 so is there a bug in there somewhere?

    Look at last link.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Set default for all controls

    How do I set a default for all controls?
    For example, I want the label to always appear on the left.  Instead of setting the control attribute for each LED separately, I'd rather set a default to be applied to all LEDs.
    I'd prefer to do this programmatically.
    Thanks!!!

    Hi,
    one possibility is to use the function call SetAttributeForCtrls from the programmer's toolbox library.
    Another, to generate the controls programmatically - if you are using your own functions to do so you can define the default as to your liking.
    Wolfgang

  • How to make it a default for all received messages to not preview the attachment but instead show the icon? (mac mail.app)

    Hi
    I am having trouble with large incoming mail attachments.
    When I receive a large attachment (pDf) the useful mail preview feature attempts to show a preview of the attachment.  Unfortunately this is causing a lot of trouble as some PDFs are extremely large and therefore take time to open/preview.   If I right click the attachment and select view as icon, the problem with that specific message ceases as the attachment is no longer previewed.
    How can I make it the default for all attachments in received messages to only be shown as a icon and not previewed?

    In Terminal,
    defaults write com.apple.mail DisableInlineAttachmentViewing -bool Yes

  • How to make custom append search help tab default for all users?

    I've implemented my own search help append and I need to make the F4 search help to display my tab as default for all users. I know that search help stores the last tab used by the user in memory and when user uses the search help next time the last used tab is displayed but I have to make the system display the tab od my search help append always as default tab. Any idea how to do it?
    Message was edited by:
            Marcin Milczynski

    hi
    <b>Enhancement using Append structures</b>
        Append structures allow you to attach fields to a table without actually having to modify the table itself. You can use the fields in append structures in ABAP programs just as you would any other field in the table.
    Click on the append structure tab and opt to create new
    structure.
    Append structures allow you to enhance tables by adding fields to them that are not part of the standard. With append structures; customers can add their own fields to any table or structure they want.
    Append structures are created for use with a specific table. However, a table can have multiple append structures assigned to it
        Customers can add their own fields to any table or structure they want.
    The customer creates append structures in the customer namespace. The append structure is thus protected against overwriting during an upgrade. The fields in the append structure should also reside in the customer namespace, that is the field names should begin with ZZ or YY. This prevents name conflicts with fields inserted in the table by SAP

  • Enable save for all users in rich client document defaultly for all users

    Hi,
    Is there a option to enable save for all users in a rich client document defaultly for all users across the company. As the users who are creating reports are forgetting to check the box before sending the rich client document to others. Kindly let me know if you have any suggestions on this.
    Thanks,
    Karthik

    I'd suggest that is is where your BO folder structure comes in. You can export from Rich Client to any folder that you have permissions to access - some sort of collaboration folder system would potentially be better and more secure than sending unsecured reports via email. If your IT security team found out that you were removing document security, I doubt they'd be impressed!
    You can't do the default save for all users, simple as that (it's bad practice anyway, which is probably why you can't). While it's not the answer that you want to hear, it is the correct one.

  • I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the defaul for opening a project?

    I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the default for opening a project?

    scottypet
    For Premiere Elements 11 and 12, you cannot change its default project preset from NTSC AVCHD Full HD1080i30 or its PAL counterpart PAL AVCHD Full HD1080i25 to something else.
    For each project, you can set the project preset manually if you do not want the program to take over setting the project preset based
    on the properties of the first drag to the Timeline.
    To set the project preset manually, open the project to the Expert workspace, go to File Menu/New/Project and Change Settings.
    In the Change Settings area, change the project preset. Before you exit that area, be sure to have a check mark next to "Force Selected Project Setting on This Project" in the new project dialog.
    Then you import your source media, using the appropriate Add Media choice.
    ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
    If you want a version of Premiere Elements that uses the default project preset of NTSC DV Standard or its PAL counterpart PAL DV Standard, then you need to look to a version of Premiere Elements earlier than 11.
    Please let me know if you have any further questions on this or need clarification.
    Thank you.
    ATR

  • Having difficulty setting MplayerX as default for ALL .avi/.mp4/etc files.

    When I open a file with "Open With" option, selecting "Other", then selecting MplayerX and at the bottom clicking "Always Open With" - it works great for that one file. The rest automatically open with Quicktime. How do I make my MplayerX my default for all the video files?
    Thanks!

    Try clicking the change all button.

  • After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • ST22 timeout for all LC related transactions  LIVE cache start stop working from LC10

    Hi Team
    we are a getting a  ST22 timeout for all LC related transactions  LIVE cache start stop working from LC10
    LC version 7.9
    OS AIX
    SAP SCM 7
    SDBVERIFY giving the following error
    Checking package Redist Python
    Checking package Loader
    Checking package ODBC
    Checking package Messages
    Checking package JDBC
    Checking package DB Analyzer
    ERR: Failed
    ERR: Checking installation "Legacy" failed
    ERR: Group of directory /sapdb/data/config/install changed [0 =>
    sdbregview -l is showing good.
    any idea what might went wrong.
    trying to use sdbverify -repair_permissions , but not sure about the exact syntax to use.
    and it is not related to timeout parameter, we tested with different timeout values, but still the same error.
    thanks
    Kishore Ch

    Hello Kishore,
    you could check the sizing of the liveCache data.
    * Report  /SAPAPO/TS_LCM_REORG_SNP has checks  of the SNP planning areas for superfluous objects.
    * Delete old/temporary APO data.
    * /SAPAPO/TS_LCM_REORG report checked TS superfluous objects.
    If you didn't create the planning versions, copy of planning versions & data load to liveCache, then create the SAP message to check your system on the question of the dataarea usage.
    If you have the long running APO transactions => performance of the SCM system has to be checked.
    If you have the bottleneck in liveCache & could not solve the case by yourself => create the SAP message to BC-DB-LVC and get SAP support.
    Best regards, Natalia Khlopina

  • File, Send link doesn't open a new email. Using Firefox 11.0. Outlook 2010 is the Mailto default and W7 default email program. On the About:config page network.protocol-handler.external.mailto is set to regular font (not bold) "default Boolean true".

    File, Send link doesn’t open a new email. Running Firefox 11.0. Outlook 2010 is the Mailto default and the W7 default email program. On the About:config page, network.protocol-handler.external.mailto is set to regular font (not bold) “default Boolean true”.

    I assume you have tried toggling the setting in Firefox between Outlook and, say, Gmail:
    orange Firefox button ''or'' classic Tools menu > Options > Applications
    In the search box, type or paste '''mailto''' and pause for the list to filter.
    Change the setting and OK to save it, then return to the dialog, change back, and OK again.
    You also might want to toggle the setting at the OS level between Microsoft Outlook and the native Windows Mail client in a similar fashion. In Windows XP you could use IE's Options dialog, Programs tab, for this, but I'm not sure in Windows 7.
    Since one possibility is a problem in your Firefox settings (including the possibility of interfering add-ons), and another is a problem at the Windows level (e.g., Registry settings), it would be useful to try to identify which one it is. One quick way to distinguish is to create a new Firefox profile. It will start up with all factory settings. You can switch back to your existing profile after testing.
    First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    After closing Firefox, start up again in the Profile Manager as described in this article: [http://support.mozilla.com/kb/Managing+profiles Managing profiles].
    With the new profile, can Firefox successfully create a message in Outlook?

  • TS1253 I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

    I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

    What have you tried?
    You are going to get nowhere quick with the 6.1 utility in Mountain Lion if this is the only OS you have available.
    Look up how to install 5.6 utility under ML. At least then you can see printers. That is assuming you are trying to use USB.
    Has this worked ever on Mountain Lion? Did you download the drivers for that printer for ML?
    Plug it into a computer directly.. does it work? If it doesn't work locally it sure will not work via the network.

  • I need a reference for the parameters in Firefox about:config.

    I need a reference for the parameters in Firefox about:config.
    I can't find it on the Web.

    *http://kb.mozillazine.org/about%3Aconfig_entries
    *http://kb.mozillazine.org/Category:Preferences
    There is also info in the Firefox preferences files (open via the location bar):
    *resource:///defaults/pref/firefox.js
    * resource:///greprefs.js

Maybe you are looking for