Reset to factory setting, reset to factory setting

I want to reset, but NOT sync to my itunes. If I could install OS6 all the better.

If you have iOS 5 now, go to Settings>General>Reser>Erase all content and setting. The set up the iPad as new. Then go to Settings>Gener>Software Update and update

Similar Messages

I want to reset my bootcamp Windows 7 to factory setting. How would I do this without damaging or effecting my Mac data?

I want to reset my bootcamp Windows 7 to factory setting. How would I do this without damaging or effecting my Mac data?

If you want to erase the BootCamp Partition, you'd use the Bootcamp utility.
Then that part of the Mac's hard disk drive may be available for use in OS X.
{Or, if you want to install a clean Windows 7 in the same BootCamp partition
you'd use the BootCamp utility to erase/install Windows in the same location.
There is a BootCamp Support section in Apple Support online, and also there
is a fairly OK ASC discussions area specific to that purpose. }
But you may have to check to see if the partition map is correct for Mac OS X
after you've used Bootcamp utility to remove Windows and the partition map.
If you do not use the BootCamp utility to remove Windows, correctly or if a
different method to install Windows was used, you'd have to move your Mac
OS X system and applications off the computer to an external hard drive by
use of a clone utility (carbon copy cloner, or superduper, etc) then use the
OS X disk utility (from running clone, is easiest) to erase the computer's HD
and then correctly partition map and format the hard drive for Mac OS X.
At that point, the entire drive would be erased to reclaim any untouched
partitions from alternative Windows utilities that were used, or not used in
the time frame of proper opportunity.
I've had a few Macs that had been partitioned for Windows and found one
second hand MacBook to have more actual hard disk drive capacity than
the previous owner and the Mac HD info suggested on first glance. About
70% of the drive had been a Windows partition, but was invisible to OS X.
So that turned out to be a lucky find, it was like installing a larger HDD.
The wording of your question leaves a lot
of important information out of the picture.
Good luck!
edited

TS1398 My Wi-fi on/off button in setting has stopped working and I can't even attempt to find anything does anyone know how I can fix it?? I've already reset the phone setting, network and factory settings

My Wi-fi on/off button in setting has stopped working and I can't even attempt to find anything does anyone know how I can fix it?? I've already reset the phone setting, network and factory settings

can you see the wi-fi address in the about? if it show N/A, your iphone needs to be repaired.
if your ios is 5.1.1 or you can see the wi-fi address,you could try to connect your iphone to the itunes to restore and update.

How to retrieve ilife/iwork pre-installed apps on my iphone 6 plus after factory setting reset.

How to retrieve ilife/iwork pre-installed apps on my iphone 6 plus after factory setting reset.

Hello arielfernan24,
You can access previously purchased or downloaded content by following the steps in this article:
Download past purchases - Apple Support
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

I have a replacement Note 3. My Vodafone SIM, which worked fine in the original, fails in the replacement. When I try to access Settings, the menu briefly flashes, then the phone reverts to the home page. Will a Factory Data Reset fix this?

Hi,
I have a Note 3 and a Vodafone SIM that are not playing well together.
The history is:
I got my Note 3 over 2 years ago. We visited Italy 2 years ago and I bought a Vodafone sim at a Vodafone outlet. Everything worked perfectly during that trip and a subsequent trip to France.
Last October, I had to replace the Note 3 because the camera was failing. I had insurance, so the insurance company sent me a refurbished Note 3. When I tried to use the SIM last December, the Note 3 had problems. When I put the SIM in and started the Note 3, the phone recognized the sim (but gave me an error that, according to Verizon, is spurious). I could make phone calls but I could not access the data network. In order to access the data network, you have to go into Settings. More Settings, Mobile Networks and set the Access Point Name.
With the replacement Note 3, I cannot access Settings. As soon as I try to access Settings (with the Vodafone SIM installed), the Settings menu appears and then immediately the home screen comes up. After working with Verizon for over an hour, I was able to get into Settings and set the access point name by booting into Safe mode. But as soon as I rebooted into 'normal' mode, Settings failed and I could not access its menu (to turn on wifi, for example). There are a couple of other apps that did the same thing - but I cannot remember which ones.
I have talked to Vodafone - they have no clue. I talked to a Samsung rep I ran into at Best Buy, he thought the Vodafone SIM might be corrupted. And now a Verizon tech I talked to last week thinks it is a firmware problem on the phone and I should do a Factory Data Reset.
Have you ever heard of this problem? What do you think might be causing it?
Thanks for your help.

On2CO, I'm glad you have reached out to us today. Thank you so much for the very detail description on what is going on with the device. Sounds like there might be an issue with an application that might be causing these issues. The reason I say that is, when the phone is in Safe Mode you are able to access the Settings screens with no issues. While in Safe Mode that does block all 3rd party applications from running on the phone. I would suggest on trying to back up the device and perform a factory reset: http://spr.ly/6-182Vuo (you would want to make sure to uncheck Automatic Restore in step 3). Once the reset is complete try to see if you can get into Settings. Then, I would recommend on adding 3rd party applications back on to the device one by one to see if we can find what app might be causing this issue. Please keep us posted if you have any further questions or concerns. KevinR_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

My ipad has a password that I can't remember and it's not connected to the internet, so my computer won't recognize it and I know that when all get this figured out that it will be set back to factory state but how do I get it there

My ipad has a password that I can't remember and it's not connected to the internet, so my computer won't recognize it and I know that when all get this figured out that it will be set back to factory state but how do I get it there

If you've forgotten the passcode to unlock your iPad then there are instructions on this page for how to reset the iPad (your iPad doesn't need to be connected to the internet) : http://support.apple.com/kb/HT1212
If your computer's iTunes isnt recognising the iPad when you connect it then have you got a recent version of iTunes installed on your computer ? There are also troubleshooting pages for a device not showing in iTunes on these pages :
PC : http://support.apple.com/kb/TS1538
Mac : http://support.apple.com/kb/TS1591

Base Station, Error 4 for any action, Factory settings reset didn't work

Hi all,
I decided to try my AirPort Base station (which was used by someone else before), and have changed some settings trying to make it work Now I keep getting that annoying error message with -4 error code when trying to connect to my base station, and can't make any changes whatsoever.
I have a Windows Vista OS, and an 4.1 Admin utility ( I tried to install a later version, but it kept saying I had to "install Windows XP or Vista first". (Kidding?!)
I did both a soft reset and a factory settings reset (although I don't know how I did the latter, since both pressing the resed button for 5 and 30 sec did not work. Anyway, the station's name has changed to its serial N, so I did the reset somehow
The station's IP address in the Admin Utility begins with 172. and the same IP ip address I have in my network settings. I guess I had changed the ip somehow, and that's where the problem started... Anyway, I can't enter the configuration window to change anything.
Any ideas?

Still no ideas? I can't believe there's nobody to answer this question
Well, as I said I believe the problem is the ststion's new ip address, but I don't know how to change it.
I did a full reset, but the ip address did not change, so maybe it is my laptop's setting to blame?

I messed my color sync profile up. How can I reset my color sync profile to factory settings?

I messed my color sync profile up. How can I reset my color sync profile to factory settings?
Core 2 Duo, OS Lion (not mountain)

Hi, yes, I messed it up by trying to edit it.
I just clicked configure and changed the options. Is there a factory setting I can reset it to?
The problem when I try to get it back to normal is that it never looks just like it did. It looks mainly fine, but things like light blues look wrong.

Linksys WRT350N factory products reset

When i setting this router, i press the factory product reset, then my router cannot connect to my PC. i set my PC to 192.168.1.2 but i still connect to my router. Could you help to solve this problem ??? thans b4.

Since you have resetted your router to the factory default, now you need to re-configure all the settings on your router from scratch.
Who is your ISP?
If your Internet Service Provider is Cable follow this link
If your Internet Service Provider is DSL follow this link

After factory data reset, Google calender won't sync

Have completed TWO factory data resets on HTC Thunderbolt. Once w/deleting SD Card and once without. Still cannot get the calendar to sync past 30 days! I asked Big Red about it and they told me an "in house" HTC programmer would call me. That never happened and this was two weeks ago. . Can anyone suggest how to get my calendar back?

Hi, Tweebolt!
I'm sorry you did not receive that call back! I want to see your calendar working properly for you! When you go into Settings>Accounts & Sync>Gmail/Google> are you seeing Calendar sync greyed out or checked? If greyed out I've got some tricks I want you to give a try. What I suggest is going into Settings>Account, then creating a new Gmail account (this is nothing you have to keep, we're only going to use it for five minutes). Once created, go into the Accounts & Sync, select the new account and ensure Calendar is set to sync. Then go into your Calendar application, tap Menu>Settings>ensure your real Gmail account exists and add a new event. Next, you'll go back to Account & Sync, and you should have the option to check Calendar sync under the real Gmail account. Check it to initiate the sync. After all is said and done and the sync is complete, go under Accounts & Sync and remove that fake account you set up. I've been this jump start a Gmail account countless times, and its a lot of steps but takes 5-10 minutes to complete. Keep me posted!
Thanks,
AdamE_VZW
Follow us on Twitter @VZWSupport

Hi. Bought recently iphone5 from singapore. but the one who sold us the phone has set restriction. now i cannot download any apps from my itunes. I dont know the restriction code so i think i need to reset my phone. does resetting remove the unlock?

Hi. Bought recently iphone5 from singapore. but the one who sold us the phone has set restriction. now i cannot download any apps from my itunes. I dont know the restriction code so i think i need to reset my phone. does resetting remove the unlock?

You need to restore it with iTunes or wipe it from the phone itself... Settings > General > Reset > Erase All Content and Settings. Either of these will create a factory fresh phone, thus removing the restrictions. Note that ALL user data will be wiped.

Hard drive configuration is not set to the factory default

When I go into Acer Recovery Management to try to create a factory default backup I get a pop up that says Hard Drive configuration is not set to the factory default - back up aborted. How do I get my hard drive set back to factory default?

Create recovery backup or recovery media and resetting to default are 2 different things. you can create the recovery backup even without resetting to factory default; you just need to start Acer erecovery and follow instructions. it will copy the recovery partition to DVDs or USB flash media.if Acer erecovery is not working and you have Windows 8.x, you can follow this guide:http://windows.microsoft.com/en-us/windows-8/create-usb-recovery-drive about resetting to factory default, the easiest way is to press ALT+F10 at boot and then follow onscreen instructions.

My sister got ios8 and something got meesed up and apple reset her phone and my ipod is set up with that email so i lost everything please help ill share details

my sister got ios8 and something got messed up and apple reset her iPhone and my ipod is set up with that email so I lost everything. details if u can help me thanks

This issue has been resolved - my Support Advisor, Edgar, was able to discern what was causing the problem.
It appears that, despite years of never experiencing this, one of the latest ipod updates actually altered my device's personal settings and changed it to "Manual" for all synchronizing; even performcing Factory Restores did not change it back to being automatic.
My ipod is working as good as ever now thanks to Edgar. If anyone else is having this problem, please make sure you check your device's settings in iTunes and see if "Manual" is checked - even if you never changed the settings yourself and have no reason to suspect that to be the problem, as was the case here. If it is checked - uncheck it to enable automatic syncing.
So relieved this was not a much more serious problem. I've missed having my music on the go. Thanks, Edgar!

IPod touch second generation. Trying to sync to mac. Have updated itunes and snow leopard. When I plug it in, it is recognized in iphoto, not itunes. ipod is freezing. Have tried several times to set back to factory settings, but computer wont see it

iPod touch second generation. Trying to sync to mac. Have updated itunes and snow leopard. When I plug it in, it is recognized in iphoto, not itunes. ipod is freezing. Have tried several times to set back to factory settings, but computer wont see it

Try here:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

HT201376 Hello, I am trying to reset my macbook pro to its factory settings but I can't type the name of the formatted disk nor can I click on erase, as this feature is disabled. Could you please assist?

Hello, I am trying to reset my macbook pro to its factory settings but I can't type the name of the formatted disk nor can I click on erase, as this feature is disabled. The 'type name' space and the 'erase' button are in light grey - Could you please assist?

Hello!
Did you boot to the Internet Recovery Partition?
Here’s how:
1/ Make sure your computer is completely shut down.
2/ You’ll have to be quick next: Press the Mac’s power button. As soon as you either hear the loud chime, or see the display light up - usually after a second or 2 - on your keyboard press [alt] + [cmd] + [r] Keep these keys on your keyboard pressed until you see a spinning globe with the text “starting Internet Recovery” You might have to connect to your Wi-Fi network before you can continue here.
After a few minutes, you’ll be presented with a Utilities screen. This is the Internet Recovery partition. If this step is already giving you problems, try using a USB-keyboard. It doesn’t have to be an Apple-keyboard. If you have a Windows-tailored keyboard laying around, use the “Windows-flag” key in stead of the [cmd]-key and it should also work.
3/ Choose Disk Utility and click [continue]

I reset my iphone 5 and went to set it back it up and it says it has to be registered in the developer account. I do not have one of these. PLEASE HELP!!!

I reset my iphone 5 and went to set it back it up and it says it has to be registered in the developer account. I do not have one of these. PLEASE HELP!!!

It's beta. It's no where near ready for prime time. It's put out there so that developers can start getting their products ready fo the new release.
I've been working in IT for over 25 years. People have gotten the wrong idea about what a beta is thanks to the likes of google, who release a product to market and call it "beta" just so they don't actually have to support it. I've beta tested operating systems going all the way back to OS/2 when it was still a joint Microsoft/IBM project. Believe me, you do NOT want beta versions of operating systems getting into the hands of the unwashed masses. It would quickly turn from 'getting rid of bugs' to outright revolt.

Reset to factory setting, reset to factory setting

Similar Messages

Maybe you are looking for