Reset transfer posting for doubful receivables and its provisions
Dear Expert,
I have run f103 (transfer posting for doubful receivables) and f104 (provisions for doubful receivable) but the value is wrong.
is it possible if i want to reset/cancel f103 and f104 and the rerun it? how can it be?
Thx n regards,
Marilyn
SE93 add variant
Similar Messages
-
Transfer posting for sale order
I have Material A Received from customer A 100 mtrs, in Storage location 0001
Customer is telling me to use only 20 mtrs. so i will raise sale order (for the rest of the 80 mtrs he will tell when to issue to prod)
By this time i have to do transfer posting only for 20 mtrs and also i have to create a batch and keep it in 0002 storage location
what is the correct movement type i have to use??Hi murugan,
I am receiving material by raising PO, then i am doing GR
For eg suppose customer is giving 10000 mtrs, i will raise PO for 10000 mtrs and take the printout of it and i give to him as Receipt that PO number is for eg 1000
i will do GR for 10000 qty against that PO number 1000 and keep it in 0001 str location
in stock i will have 10000 mtrs of customer material
Later after 1 month he will tell me what design has to be printed on the Material
that too he wont give for total 10000 mtrs he will be giving only for 2000 mtrs
for this 2000 mtrs i have to create a batch and i keep it in 0002 str loc
while receiving material the code will be CM01
After receiving the design from the customer we have to do transfer posting for 2000 mtrs and the code will be BC01 batch - 1000b01(shows 1000 is the Tracking number(PO number) B01 Batch 01)
so that we come to know how much material have been received from the customer and for how much metres we have received design
How much is still lying in storage location, tracking will be easy
My question is CM01(customer material at initial stage dont have batch number)
After receiving design for partial quantity to do TP matereial to material for 2000 mtrs fromt received 10000 mtrs.
Material to material TP at that time system should create Batch? sale order also will be created as soon as we receive the Design for 2000 mtrs -
I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.
What TC do you have? Model number direct from the base is a big help, it will be A1 followed by 3 numbers.. eg
A1409 Gen 4.. The new AC is A1470
How is it setup?
I need the whole network setup. what modem/router, how is the TC connected etc??
I also need to know what IP the ipod gets, so I can see what mode the TC or network router is working in. -
Error in Transfer posting for movement type 303
Hi Sir,
I am getting following error while doing Transfer posting for movement type 303 thru BAPI_GOODSMVT_CREATE
Error in Function:
Order not found or not permitted for Goods Movement.
I am passiing all mandatory parameter for it as per BAPI Documentaion in tcode BAPI
Transfer posting
Transfer posting without reference to a reservation
The following fields must be populated:
Material number
Plant
Storage location
Movement type
Movement indicator
Quantity in unit of entry
ISO code unit of measurement for unit of entry
If I am doing manually by MB1B tcode, it is successfully done.......here its not asking any ORDER No...
Please help me .........
Regards,
KrishanI'm not sure what you're system set up is... So I'd suggest looking at everything you enter on the screen and then checking to make sure you are passing all the information in the BAPI.
With that said our system does require posting date, and batch. You might check that. Also check that you've included all the required information in the header.
Did you use the same data when you tried to process the BAPI that you used when you tried to do MB1B manually? -
Transfer posting for intercompany
Folks,
I have the following scenario:
Company code 1, plant 1, SLOC 1 and WHS 1
Company code 2, plant 2, SLOC 2 and WHS 2.
Is it possible to do a transfer posting (for example 301) between plants that have a different company code?
Regards,
MdZHi,
check this link
Its not possible with 301 mvmt type
[http://help.sap.com/saphelp_470/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/content.htm]
Thanks
Suresh -
My ipad 2 will not connect to the internet I've tried to manually enter it but its not recognising it or finding any connections. I've reset it to factory settings twice and its not clearing it. Does anyone have any ideas??
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
How do I set up a POP account that links to my business email account for both receiving and sending
How do I set up a POP account that links my icloud email to my business email account for both receiving and sending?
Can you post your Troubleshooting Information?
Help (Alt-H) - Troubleshooting Information -
I tried to reset my ipod 2 days ago and its still loading. It wont turn on either. Is that normal? what should I do? PLEASE HELP ME!!!!!
Not normal. For 3G and later it takes minutes, for a 1G or 2G it can take four hours or so.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Report for Asset number and its Purahcse order number
Hello Friends,
Please give me details of report for Asset number and its Purchase order number .
Regards
Nilesh Vakilhi,
GO to ME2N...
use SHIFT + F4..
there check for the acc. assign cata. field and input the asset and execute..
Regards
Priyanka.P -
the back button no longer works. I have disabled all add-ons,rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file -
I have been offered cc 2014 for 29.99 and its says contact the support team to see if I qualify - trying to get to the support team option by telephone just seems to send me in a loop - getting pretty disgusted with all the rigmarole just to get a something
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html -
Depreciation run not posted for 2006/2007 and 2008.
Hi,
I have a situation where depreciation has not been posted for 2006,2007 and 2008.
Now since there are 2 fiscal years already open the system does not allow to post to the 2008. since only 2 fiscal years can be open at a time.
Old periods cannot be opened to post depreciation.
I feel the only way out is to assign a new depreciation area?
Is it possible to change the Chart of Depreciation or active (posted to) depreciation area?
Any suggestions.
Thanks,
DakshaHi
If your 2007 is open then post the depreciation thru AFAB with unplanned posting run, after completing it you can close the periods & open 2008
Hope this solves your issue
Regards
Veena -
To sync contacts with my computer, I choosed "Sync Contacts with" within iTunes for Windows Outlook and Its suncking but contact is not showing in the Oulook contact.
Do changes/additions to the contacts list in Outlook appear on the iPhone?
-
Hello Bi experts,
Actually i am implementing standard Purchasing module in BI system.
While implementing , i have installed cube 0PUR_C04 with data flow before options.
After installation , i am not getting transfer rule for 2LIS_02_HDR , 2LIS_02_ITM and 2LIS_02_SCL .
I am getting transfer rule for 2LIS_02_S011 only.
0PUR_c04 contains these 4 dataspurces - 2LIS_02_HDR , 2LIS_02_ITM and 2LIS_02_SCL , 2LIS_02_S011 .
So how can i get these transfer rule. and if we want to implement std Purchasing module in BI , which Cubes are required or necessary.
In metadata repository also , for Cube 0PUR_c04 , it does not showing transfer rule HDR/ITM/SCL. there also it is now showing transfer rules.
I will be also very thankful if anybody just give me overview of purchasing.
Thanks,
Sada.Hello Mani,
Thanks a lot.you are the first one who has answered my que. which i expect .
Look at following floe in infoprovider in my system. and please tell me what exactly i should do?
Cube->Purchasing Groups 0PUR_C04
Update Rule->0PUR_C04 2LIS_02_HDR AY0XVMCJPXXXXXXXXXXXXXXXX
Infosource->Purchasing Data (Document Header Level) as of 2.0B 2LIS_02_HDR
Update Rule->0PUR_C04 2LIS_02_ITM 4YSO2PF9XXXXXXXXXXXXXXXXX
INfosource->Purchasing Data (Document Item Level) as of 2.0B 2LIS_02_ITM
Update Rule->0PUR_C04 2LIS_02_S011 CSB3FHGQXXXXXXXXXXXXXXXXX
Infosurce->Purchasing groups 2LIS_02_S011
Transfer Rule->from 2LIS_02_S011 for SC4 Client 600 2LIS_02_S011 SCXCLNTXXX
Datasource->Purchasing groups 2LIS_02_S011
Update Rule->0PUR_C04 2LIS_02_SCL 4ZZ0DMZXXXXXXXXXXXXXXXXXX
Infosource->Pur.Data (Document Schedule Line Level) 2LIS_02_SCL
Mani i am expecting answer from you.
Thanks,
Sada -
I'm trying to set up my iphone for home sharing and its says unable to set up home sharing. My password is correct, I've tried it three times with the same message. Any help?
Hello daltonfromgbr
Check out the article below to troubleshoot you issue with connecting to Home Sharing. It will walk you through checking firewall settings as well as your network connection.
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Regards,
-Norm G.
Maybe you are looking for
-
Bonjour services disappear - can't see speakers in iTunes
Hi, I guess this might not be the correct forum but I can't seem to find anywhere else it may sit. I am having issues with certain bonjour services not running on my iMac, this is mainly affecting speakers being shown in iTunes. I don't have a proble
-
Error in Process-Please specify a valid account assignment error inBackend
Hi Gurus, I am abaper and I am new to SRM technical. One Po is already there in SRM 4.0 and ERP with cost center and profit center replicated as it is. But my user is chaning the price of the PO in SRM. It is showing as 'Error in Process' I check in
-
"Install Adobe Flash Player" is damaged and can't be opened
The subject line of this discussion is what is displayed when I go to try to install Adobe Flash. I have a Mac OS X 10.9.3. I had Flash downloaded for a while, but the last update wouldn't update. It would download, but then when I went to open it it
-
loaded itunes and it worked for two days, now I get an error message saying it has to close sorry for the inconvenience. Have tried many things from different discussions on the boards and nothing has worked. I tried to open Quick Time because I read
-
Authorization questions PFCG...
Hi Guys A Couple of questions... We are upgrading from an older version of CRM without WEB UI to 7.0, we have composite roles on all our user, i.e. more than 1 role per user. As I have understood it you only have the possibility to assign on PFCG ROL