Reset upto mobile me does not work

I have an iphone macbook and pc I want to syuc all contacts etc.
All went fine and I uploaded from my pc a contacts list, but now a week later the details on the mobileme is differant to the pc ie lost addresses and mobileme is trying to download this info to my macbook.
I have tried to reset sync data from my pc but when I check online the mobileme data has not changed.
Help please

Two Methods.
1) Go to System Preferences and click on .mac and the update should run.
2) Failing that use the Add Account + button and add the Screen Name as if it were an AIM one and type you Screen name in full with the @me.com or @mac.com depending which you have.
8:57 PM Friday; August 29, 2008

Similar Messages

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch n

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
Can you help me?
Thanks

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

I have a 4th gen iPod touch and I can not connect to the Internet even though my iPad works and my computer let's me get into the Internet. It gives me a message cannot to server. Please help I have tried to reset it but that does not work

I have a iPod touch 4th gen. And I cannot get into the Internet I get a message that say cannot connect to server. The other computer and my iPad still work with the Internet . I have reeked to reset it but that does not work. Please help me.

I do not know wat "reeked to reset" means.
Try the following:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Power off and then on your router.
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections

MOBILE VERSION DOES NOT WORK!!!! Is Adobe not aware that encrypted forms fail using mobile reader??

I created a PDF Form in Acrobat Pro 9, and encrypted it with a password. No other restrictions were placed on the document.
When I open the document on an android device (tablet or phone) or an iPod, it does not allow me to fill in any of the fields or apply a signature of any kind.
However, when I open the same exact form with the desktop version (Reader XI), it does allow me to fill it out and sign it with no problem.
I have no problems filling it out and applying a signature with a mobile device when the document is not encrypted.
PLEASE HELP!
I have updated all my versions to the most latest.

Yes, apparently Adobe is aware of this.
For Adobe to omit such basic functionality to its mobile version is appalling.
I would have expected this from Microsoft, but not from Adobe.

HT4623 my home button seems to be frozen or not working any suggestions? I have tried resetting it and it does not work...

My home button on my ipod touch 4th Generation is not working.. I have restared it several times and have not had any luck...Any suggestions???

Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Lync 2013 mobile app does not work internally, SIP domain is Different than users UPN. not sure if that matters.

using the lync client connectivity tester on a pc on the same lan as my mobile client everything is green and it says its ready for use.
using my android galaxy s5 client on wifi on the same lan i get a screen with waiting to sign in spinning and an error at the top "we cant connect to the server check your network connection and server address, and try again."
i have uploaded the full client log files
here: client log file
some errors that stand out from this log file are:
1. ERROR HttpEngine: Certificate check fails: java.security.cert.CertPathValidatorException: Trust anchor for certification path not found.
2. <h2>401 - Unauthorized: Access is denied due to invalid credentials.</h2>
<h3>You do not have permission to view this directory or page using the credentials that you supplied.</h3>
i am using the correct creds, same creds i used on the analyzer tool.
in the analyzer tool i did have to fill in the username field because my sip domain is different then my users UPN. which from what ive read its required to use the username field.
i also filled in the username field in the mobile app with domain\username
3. ERROR LYNC: ERROR TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/platform/networkapis/privateandroid/CHttpConnection.cpp/295:CHttpConnection exception: java.lang.NullPointerException
Jan 14, 2015 8:40:49 AM INFO LYNC: INFO TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/transport/requestprocessor/private/CHttpRequestProcessor.cpp/173:Received response of request(UcwaAutoDiscoveryRequest) with status = 0x22020001
Jan 14, 2015 8:40:49 AM INFO LYNC: INFO TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/transport/requestprocessor/private/CHttpRequestProcessor.cpp/201:Request UcwaAutoDiscoveryRequest resulted in E_ConnectionError (E2-2-1). The retry
counter is: 0
4. Jan 14, 2015 8:40:50 AM ERROR LYNC: ERROR TRANSPORT /Volumes/ServerHD2/buildagent/workspace/200604/tps/ucmp/ucmp/transport/authenticationresolver/private/CAuthenticationResolver.cpp/431:Failing the original request as we weren't able to get the token
this is the same type of error i was getting in the lync connectivity analyzer until i filled in the username field. but its filled in, in my client.
again you can see the full log file is `HERE
thank you in advance for any help. im trying to get internal working before i try external.

Eric,
I am trying to configure a reverseproxy on my netscaler which is in a 2 arm mode(dmz/internal) but I keep getting an error when configuring the monitor.
i used this guide to configure it
http://www.lynced.com.au/2014/04/configure-citrix-netscaler-vpx-as.html
but continue to get this error in the netscaler monitor "Failure - TCP connection successful, but application timed out"
so the virtual server is never up, thinking about just changing it to tcp as a monitor so it stays up and i can at lesat get the vip up.
Also your link to the diagram shows it going to the reverse proxy but the one im using has it going directly to the front end servers.
http://www.lync-solutions.com/Documents/Lync_2013_protocol_poster_v6_7.pdf
I'm guessing Microsoft's is the correct one but wonder why the config differential?
I see that your diagram says "mobility url", what is the mobility url? i though that was the lyncdiscoverinternal.internal.com
current setup is
2 fe servers on internal
1 edge server on dmz
1 almost done reverse proxy netscaler load balancer.
also this ms link i used to configure dns entries, along with the pdf linked above.
http://technet.microsoft.com/en-us/library/jj945644.aspx
i currently have these external dns entries and they all point to the edge server on the dmz.
dialin .external.com
lync .external.com
lyncweb .external.com
lyncdiscover.external.com
meet .external.com
sip .external.com
webconf .external.com
av .external.com
_autodiscover._tcp.external.com.
the internal dns links point to 1 of the front end servers
1. lyncdiscoverinternal.internal.com
2. lyncdiscover.internal.com
3. _sipinternaltls._tcp.internal.com
4. _sipinternal._tcp.internal.com
5. sipinternal.internal.com
6. sip.internal.com
thanks again for your help.

Computer really noisy (fan I think?). Resetting PRAM and SMC does not work.

Hi,
so basically, as the title says, my computer is making a really loud noise as soon as I turn it on, I am presuming it is the fan.
Over a month ago, my computer started to constantly crash, and about two weeks ago I took it to a Genius Bar for a diagnosis. The problem was a hard drive failure, so I had it replaced and yesterday I brought it back home.
However, after the fix, the computer now runs fine, but there is a really loud noise from the computer.
I have tried resetting the PRAM and SMC like some other threads have suggested, and none of them have worked. I have tried restarting, shutting down the computer and everything suggested.
The computer has never made this noise in this manner before.
Before the fix, the only time it would be noisy like this is when I wake it from sleep, just left it there (on screen requiring username and password) and it sleeps again, and if I wake it from sleep, then it would be loud like this, but that is solved by just simply sleeping the computer again and waking it, and it will be all quiet again.
However, now, it makes this loud noise as soon as I turn the computer on, and as long as the computer is not shut down or asleep, it will make this noise.
Before the fix, my OS was 10.4.11, but the Genius Bar had installed 10.5.8 on this hard drive.
Is this a software problem or a hardware one?
Anyone got any suggestions or ideas how to fix this?
I have called the Apple store I visited for this fix already, they push me over to AppleCare and AppleCare pushes me back to Apple store and they tell me they cannot provide technical support over the phone and would need me to take the computer back to the Genius Bar.
I am just not happy about this. I live almost an hour away from the closest store and I have university to attend to as well.
So I am hoping this problem can be resolved without having to go back to the Genius Bar, although all methods I have read so far do not help.
Thanks,
From Lelouch

Hi, well, the thing is, I am just worried that, while making other repairs, they might have damaged something unintentionally and probably do not know about it, which would not be documented.
My initial problem of a loud fan, after a hard drive replacement, was fixed, so I do not hear it anymore, but this wind-like noise is different. With the iMacs, I presume the fans are towards the top, which was where the loud fan noise came from, however, this wind-like noise seems to come from the bottom of the computer screen are, centre and right side (in the direction I face it), but not the left side.
I describe it as wind-like, but it sounds a bit like when the computer is on heavy demand and the computer loads, yet different as it is quieter and slightly different in pattern, and unlike the usual heavy demand noise which comes from the top, it comes from the bottom.
I actually installed a temperature widget after my last repair, just in case my fan was just simply tuned off and would not come on at all for the sake of fixing the loud noise it was making.
The temperatures read as follows:
HD: 31
CPU: 27
Ambient: 17
GPU: 36
GPU Diode: 46
GPU Heatsink: 36
HD Bay: 33
Optical Drive: 30
To my knowledge, these should be fine temperatures?
But the noise persists regardless. The noise can instantly be heard (providing that it is quiet enough) as soon as the computer starts up.
Thanks,
From Lelouch

HT1414 After Voice over, opening code will not open ipad2 owing to not recognizing security code so remains locked have reset programmes but still does not work. How can I clear please my code was 2121 but will not open now?

Hi, after turning on Voice over and then turning off the i pad 2, I found that it would not turn on again as the locking code which always worked till now, 2121 is not recognised. A voice can be heard when trying to enter the 4 letter code stating the letters
I have tried to repair programme by resetting several times and also downloading i tune software as suggested by your advice centre but the i pad remains locked
Please can you tell me how I can resolve this issue?
Thanks Derek Brown

If it's slow on startup it would be extensions loading or LaunchDaemons starting up.
You should have a look in:
/Library/LaunchDaemons
/Library/Extensions
You can count out anything in your home folder and it shouldn't put anything in /System as that's reserved for Apple.

How can I contact Adobe to reset activations. Chat does not work neither on OS X Mavericks Firefox nor Safari

Recently upgraded to Mavericks OS with fresh hard drive and deactivated prior to the new install.
Still says that my activations are exceeded even though they were deactivated on both laptop and desktop Mac.
Now, cannot get to Adobe chat because it doesn't work on either Safari or Firefox.
What happened to the call-in line for this?
Cheers,
Monica

I'm using chrome and it said not available at this time. My hard drive crashed so nothing was deactivated. I am able to install so far but it's using my second try and I can't get to Adobe to have reset. What's up

Mobile Broadband does not work on HP mini 110

This is the my device:
$ lsusb | grep Gobi
Bus 001 Device 077: ID 03f0:1f1d Hewlett-Packard un2400 Gobi Wireless Modem
sometimes another result:
$ lsusb | grep Gobi
Bus 001 Device 020: ID 03f0:201d Hewlett-Packard un2400 Gobi Wireless Modem (QDL mode)
I have installed in my netbook with these steps:
1. Install network manager: networkmanager, network-manager-applet. Then systemctl enable, start NetworkManager.service
Run "sudo NetworkManager".
2. Install BCM4312 and Hp un2400 gobi firmwares: b43-fwcutter. And b43-firmware, gobi-loader, gobi-firmware from AUR
Here is my /lib/udev/rules.d/60-gobi.rules, i have added the red line:
# udev rules for firmware loading on qualcomm gobi devices
ACTION=="add", SUBSYSTEM=="tty" KERNEL=="ttyUSB*" GOTO="gobi_rules"
GOTO="gobi_rules_end"
LABEL="gobi_rules"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9211", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="201d", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1f1d", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="04da", ATTRS{idProduct}=="250c", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="413c", ATTRS{idProduct}=="8171", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="1410", ATTRS{idProduct}=="a008", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="0b05", ATTRS{idProduct}=="1774", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="19d2", ATTRS{idProduct}=="fff2", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="1557", ATTRS{idProduct}=="0a80", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9008", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9201", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9221", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9231", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="1f45", ATTRS{idProduct}=="0001", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="16d8", ATTRS{idProduct}=="8001", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="1199", ATTRS{idProduct}=="9000", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="241d", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9204", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9214", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9224", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9234", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9244", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9264", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9274", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="413c", ATTRS{idProduct}=="8185", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
LABEL="gobi_rules_end"
3. Install wireless: wpa_supplicant, wireless_tools, gnome-keyring.
Then systemctl enable and start wpa_supplicant.service
4. Install modem manager: usbutils, usb_modeswitch, modemmanager, mobile-broadband-provider-info
Then systemctl enable and start ModemManager
After reboot, i get this log keep being repeat forever:
$ dmesg | grep ttyUSB
[ 8.783499] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB0
[ 13.924825] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 13.925166] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 13.925490] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 13.925813] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 13.926887] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[ 15.560838] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB0
[ 15.562758] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB1
[ 17.869672] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.869883] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.870123] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.870366] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.872845] qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.873762] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[ 17.874305] qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.874560] qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.874813] qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.875605] qcserial ttyUSB1: Qualcomm USB modem converter now disconnected from ttyUSB1
[ 18.845277] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB0
[ 22.616332] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 22.616698] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 22.617055] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 22.617385] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 22.618447] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[ 23.560845] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB0
[ 23.562771] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB1
Am i missing any configuration or installation?
Last edited by princenguyen (2014-06-19 06:30:17)

Hello,
Did you find a solution because I am having the same issue with my Sony Vaio SA. It has a Gobi 2000 and works perfectly on Ubuntu 14.04 and all other distributions I have tried so i know the hardware is fine.
I dont get the message repeating although I can get it like that by using the firmware from the AUR. If I use the firmware I got from my previous Windows installation then the error only occurs when turning the device on. This is so annoying
I get the following:
NetworkManager[1787]: <info> (wwp0s26u1u4): DHCPv4 state changed nbi -> preinit
Jul 08 23:40:11 Raspberry dhcpcd[5345]: wwp0s26u1u4: soliciting an IPv6 router
Jul 08 23:40:12 Raspberry dhcpcd[5345]: wwp0s26u1u4: soliciting a DHCP lease
Jul 08 23:40:12 Raspberry kernel: qmi_wwan 1-1.4:1.0: nonzero urb status received: -71
Jul 08 23:40:12 Raspberry kernel: qmi_wwan 1-1.4:1.0: wdm_int_callback - 0 bytes
Jul 08 23:40:12 Raspberry kernel: usb 1-1.4: USB disconnect, device number 9
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry dhcpcd[3049]: if_managelink: No such device or address
Jul 08 23:40:12 Raspberry dhcpcd[5345]: wwp0s26u1u4: dhcp if_readrawpacket: Network is down
Jul 08 23:40:12 Raspberry kernel: qmi_wwan 1-1.4:1.0 wwp0s26u1u4: unregister 'qmi_wwan' usb-0000:00:1a.0-1.4, WWAN/QMI device
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry ModemManager[1785]: <info> (net/wwp0s26u1u4): released by modem /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry dhcpcd[5345]: if_managelink: No such device or address
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry ModemManager[1785]: <info> (usbmisc/cdc-wdm1): released by modem /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4
Jul 08 23:40:12 Raspberry ModemManager[1785]: <info> (tty/ttyUSB1): released by modem /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4
Jul 08 23:40:12 Raspberry ModemManager[1785]: <info> (tty/ttyUSB2): released by modem /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4
Jul 08 23:40:12 Raspberry ModemManager[1785]: <info> (tty/ttyUSB0): released by modem /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Releasing 'wds' client with flags 'release-cid'...
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Unregistered 'wds' client with ID '1'
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Releasing 'pds' client with flags 'release-cid'...
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Unregistered 'pds' client with ID '1'
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Releasing 'wms' client with flags 'release-cid'...
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Unregistered 'wms' client with ID '1'
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Releasing 'nas' client with flags 'release-cid'...
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Unregistered 'nas' client with ID '1'
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Releasing 'dms' client with flags 'release-cid'...
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Unregistered 'dms' client with ID '1'
Jul 08 23:40:12 Raspberry NetworkManager[1787]: <info> (cdc-wdm1): device state change: ip-config -> unmanaged (reason 'removed') [70 10 36]
Jul 08 23:40:12 Raspberry NetworkManager[1787]: <info> (cdc-wdm1): deactivating device (reason 'removed') [36]
Jul 08 23:40:12 Raspberry dhcpcd[5345]: received signal TERM from PID 1787, stopping
Jul 08 23:40:12 Raspberry dhcpcd[5345]: wwp0s26u1u4: removing interface
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
Jul 08 23:40:12 Raspberry kernel: qcserial 1-1.4:1.1: device disconnected
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB1: Qualcomm USB modem converter now disconnected from ttyUSB1
Jul 08 23:40:12 Raspberry kernel: qcserial 1-1.4:1.2: device disconnected
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB2: Qualcomm USB modem converter now disconnected from ttyUSB2
Jul 08 23:40:12 Raspberry kernel: qcserial 1-1.4:1.3: device disconnected
Jul 08 23:40:13 Raspberry dhcpcd[5345]: exited

IMovie "mobile" format does not work on iPad

I created several movies with iMovie and shared them via MobileMe. Each movie was rendered in the "mobile" format. When attempting to view the result on my iPad I received a message telling me there is a problem with the format of the movie and that I should discuss with the gallery's owner. After a brief discussion with myself, I decided to re-publish the movie in the "medium" format. It works.
Interesting that the "mobile" format works on my iPhone.

I created several movies with iMovie and shared them via MobileMe. Each movie was rendered in the "mobile" format. When attempting to view the result on my iPad I received a message telling me there is a problem with the format of the movie and that I should discuss with the gallery's owner. After a brief discussion with myself, I decided to re-publish the movie in the "medium" format. It works.
Interesting that the "mobile" format works on my iPhone.

Password reset from Install DVD does not work

PowerBook G4 17"
Mac OSX 10.4.10
After a system failure, I got the gray screen with the question mark. I restarted from an external drive, and, from "Disk Utility" I ran both "disk repair" and "permissions repair" to the internal drive. There were several errors, but all were repaired. When I restarted from the internal drive I was asked for a user id and a password. I entered them, but were refused. Then, I followed the steps indicated in "Mac OS X: Changing or resetting an account password" in this forum: I started from the install DVD, changed the password, and restarted, but the system refuses my user and password, (the window shakes and blanks out the password field). I have repeated all the steps several times, but the system keeps refusing my login. When I start from the external drive I can see all my documents, files, folders, image, etc, in the internal disk.
I will appreciate any sugestions in order to solve this problem. Thanks a lot.

Hi, glad to know that your LaCie HD is OK. now if you follow the instructions for Silverkeeper, you will find that it will give you an option to copy your LaCie HD clone to your Mac's internal drive. I don't have Silverkeeper, so any info. I give is from the link I gave to you earlier.
This part in particular ..
Drag the volume icon for the drive you have started from to the Source field of SilverKeeper.
Drag the volume icon for the drive your wish to clone to, to the Destination field.
"Save SilverKeeper settings.
Click Go, and wait until completion.
When Backup is complete, quit SilverKeeper.
Restart your Mac; don't press any keys; you should restart to your normal, original startup drive; if >there is a login prompt, login to account that has Admin privileges
Open System Preferences - select Startup Drive control preference.
Select the backup drive as the startup drive.
Restart your Mac; you should then startup just as if you had started up from the original, but it >should be your backup drive. You should not be prompted for any OS X registration.
Please review the release notes for SilverKeeper at the support website:
http://www.silverkeeper.com or http://www.lacie.com/silverkeeper which will reveal the most >current information."
When you have done this you will have an exact copy of your LaCie HD on your computer. Nothing else needs to be done after this - you just use your Mac!
Best wishes,
Robert.

Verizon...Stop with the "Do a factory reset" garbage...It does NOT work!!!

Stop telling everyone to do a factory reset...It's like Obama reading off a teleprompter for every word he says! Get a new script for your customer service call center and delete the factory reset verbiage. IT DOES NOT WORK.....PERIOD!

randallg wrote:
Stop telling everyone to do a factory reset...It's like Obama reading off a teleprompter for every word he says! Get a new script for your customer service call center and delete the factory reset verbiage. IT DOES NOT WORK.....PERIOD!
I do believe for some problems a Factory Reset is the right answer, but not when it comes to missed calls/text messages.

Deskjet D4260 does not work with an ethernet printer server

I am attempting to attach a Deskjet D4260 printer to a home ethernet network using a StarTech PM1115U printer server. The printer has been connected to the network through a desktop computer, and worked perfectly. The printer server will also work with a different printer (Canon i550). However, it doesn't work with the D4260. The server's port will not go online, and it does not appear to recognize the printer.
This occurs regardless of OS (Windows XP, VIsta, 7, and 8 preview all don't work).
StarTech says there is no incompatibility issue with the server and host-based LIDL printers in general or the D4260 in particular. Does anyone know of any issues, or how to get the D4260 to work with this printer server?

Yes, that is how the instructions with the server tell you to install it. The server is connected to the network via ethernet cable and the printer to the server via USB. The server's instructions (as well as those given to me from StarTech support) say to install the printer as a local printer using a TCP/IP port using the server's IP address, which must be on the same subnet as the computer you are installing the printer on. All this I have done. There are a number of settings for the port. It can be raw or LPR and there are other options. I have attached it as instructed, and I have tried both raw and LPR, and tried various other settings. I was able to install a Canon i550 on the server with no difficulties. I was able to print to the printer, and the server, when I accessed it using either StarTech's server management software or a browser pointed to the IP address, showed the server's port on line and identified correctly the printer attached to it. When I attach the D4260, however, it shows the port off line and does not identify the printer. I got this server as a replacement for one that I bought without knowing that, according to its own documentation, it does not work with LIDL orinters. StarTech did not have any such warning, and the StarTech support people said that there should be no problem with a LIDL printer. They told me to consult HP support (to which this forum is the closest thing I can find). It looks to me as if either there is something about the printer that needs to be reset, or the server does not work with this printer. So far changing the driver does something, but not enough to print.

DNS is wrong on vista pc so Internet does not work but works with iMac iPad PS3 using time capsule 1355...can not change settings on the pc vista..

I Hooked up time capsule ..set all the passwords. Works with iMac and iPad and PS3 . But vista say it needs to reset adapters. But does not work..show dlink router setting even though dlink is not connected. And has a different code...help

Is Vista computer running wireless or ethernet?
Is it plugged directly into the TC? If it is possible and you are running wireless please do plug it by ethernet directly into the TC to test.
Wireless is known problematic on Vista.. has always been so.
Is IP statically set on the vista computer??
show dlink router setting even though dlink is not connected
If this is wireless.. then please delete all the old wireless configuration.. and start afresh.

Reset upto mobile me does not work

Similar Messages

Maybe you are looking for