Reset When Using Landscape Mode

Has anyone else experienced resets while viewing Safari in landscape mode? Resets back to home screen. Same thing happens with some of the appssuch as eBay, not in landscape mode.

Howdy Scott,
If I understand correctly the left side of the keyboard when you have it showing stops responding in landscape mode until you rotate it to portrait, then back to landscape. Otherwise the left side of the screen works fine outside of the keyboard. From what I gather, this would indicate to me a software issue, so I would start by quitting all the running apps on the device:
iOS: Force an app to close
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it. 
When you have done that restart the device and test the issue again:
iOS: Turning off and on (restarting) and resetting
If the issue persists, backup your device to iTunes and then restore it as a new device and verify that it works. 
How to erase your iOS device and then set it up as a new device or restore it from backups
If it does, then restore your backup to either verify it still works and the software just needed reinstalled, or isolate the issue to the backup file itself. 
Thank you for using Apple Support Communities.
Cheers,
Sterling

Similar Messages

  • Is there a way to hide the bookmarks bar in iOS 8 on the iPad? It takes up a large part of the screen when in landscape mode

    Since I upgraded to iOS8, my iPad screen permanently shows the bookmarks bar down the left. This means I can only use about ⅔ of the screen when in landscape mode. Is there something I am missing which allows me to hide/show the bookmarks bar? Thanks

    TThank you so much! I felt it must be something straightforward.

  • I have been experiencing periodic loss of touch screen response with my iPhone 6 when in landscape mode. Flipping to portrait then back to landscape usually corrects it, but at times I need to close and reenter the app.

    I have been experiencing periodic loss of touch screen response with my iPhone 6 when in landscape mode. Flipping to portrait then back to landscape usually corrects it, but at times I need to close and reenter the app.

    Hi McGannahanSkjellyfetti,
    If you are experiencing difficulties with touchscreen response on your iPhone I would suggest that you troubleshoot using the steps in this article - 
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Sqlldr producing ora-1008 when using conventional mode

    On 9.2.0.8 Solaris 9,
    When performing the load using direct mode it works. only when using conventional mode i get the error.
    any ideas?
    10x,

    Don't use reserved words (CHAR,which is a format specification) as column names:
    http://download.oracle.com/docs/cd/E11882_01/server.112/e22490/ldr_field_list.htm#i1015797

  • When in landscape mode page does not scroll up causing the keyboard to cover typing are.

    When in landscape mode page does not scroll up causing the keyboard to cover typing area.

    No, but try terminating and restarting Safari:
    1. Press the Home button
    2. Double click the Home button to bring up the "Recent Apps" tray.
    3. Touch and hold on the Safari icon in the "Recent Apps" tray until a "-" appears.
    4. Touch the "-" to terminate Safari.
    5. Restart Safari and see if your Bookmarks are back.

  • When texting using landscape mode with phones  it becomes really sluggish

    is anybody else having this issue? i have big fingers so its easy for me to text when phone its on landscape mode since virtual keyboard is bigger, but when i do the phone takes forever to process what im writting, is there anything i can do to fix this issue? thanks.

    I am having the same issue. Was hoping it was just a simple fix, or that maybe I could go exchange my phone and the problem would be solved. Seems like such a preventable problem on a phone such as this one. I can't text too well without switching to landscape mode, since the buttons are larger, but it's SUPER lagging! I can feel it stalling, and most of the time I have typed a couple of words and have to pause and wait for the words to show up on screen!! Reeeeeally hoping this can be resolved!

  • Control center not working on iPhone 6 plus when in landscape mode

    I has a iphone 5 before it , and there's no problem with the control center, now with this expensive iPhone 6 plus , the control is not working when the phone is in landscape mode , when the screen tapped repeatedly, I can only see the little tab of the control center but I can't able to bring it up.
    Anyone has this problem?

    Hello torontonightowl,
    Thanks for using Apple Support Communities.
    For some initial troubleshooting on this issue where you're unable to open the control center on your iPhone, please first restart your iPhone, and if the issue persists then reset the iPhone.
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Cheers,
    Alex H.

  • Keyboard won't react when in landscape mode on SMS?

    Hi There.
    I updated my 5S to the IOS8.
    After that, I had problems when writing an SMS. Sometimes (almost every time) the keyboard doesn’t react to anything when turning to landscape mode. I then have to turn the phone upright, and the down to landscape again. The screen then goes black, and I can press the home-button to see the screen again.
    I actually thought this was a bug in IOS8 since it appeared after the update.
    Now I bought the IPhone 6. And I set that up with the complete backup from my 5S. I then updated to IOS 8.0.2, and the problem is also on my IP6
    I can’t find anyone else with this problem, so what can I do now?
    Is the only solution to reset the IP6 to factory default, and install sms, and contacts via iCloud?
    But then I have to install all the apps manually?
    I have a lot of apps with personal settings, and different mail accounts. I really don’t want to do all this.
    Anyone have a solution?
    Kind regards.

    Same issue here. Just did the download now I'll hit the alpha key on the screen and it does not register. Only happens in landscape mode. Only tried it on imessage and SMS, did not try email yet.
    - iPhone 6 w/ 128GB
    - Purchased directly from an AT&T Store, in US
    - iOS 8.0.2 (12A405)
    - Native iOS Keyboard
    - No other keyboard app installed or previously installed
    - Predictive typing activated

  • [SOLVED] kwin crash when using OpenGL mode after upgrading to 4.7

    I have a Ideapad Y460 (Graphic: ATi Mobility Radeon 5650). Recent days I upgrade my KDE from 4.7RC (4.6.95) to 4.7 (4.7.00) and also Catalyst from 11.6 to 11.7.
    Update:
    The problem has been solved. I used [kde-unsupported] source and kdebase-workspace package in that source contains OpenGL ES support while Catalyst doesn't support it. Thank @csslayer.
    But when I use OpenGL mode, kwin crashed. I run
    kwin --replace
    to start kwin, then the Desktop Effect shows:
    OpenGL compositing (the default) has crashed KWin in the past.
    This was most likely due to a driver bug.
    If you think that you have meanwhile upgraded to a stable driver,
    you can reset this protection but be aware that this might result in an immediate crash!
    Alternatively, you might want to use the XRender backend instead.
    And there is a re-enable button. But the systemsettings window crashed when I pushed it.
    I checked ~/.xsessiong-error and it shows this:
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 20 (X_GetProperty)
    Resource id: 0x1c0015a
    I downgrade Catalyst but the problem still exists while KDE4.7 RC run well on my laptop. So I'm not sure whether it is caused by kwin or by Catalyst 11.7 or other packages.
    Does anyone know the solution? Thanks for your patience.
    Last edited by ukyoi (2011-08-01 08:34:20)

    I found an solution. Go to Settings/Mail, Contact, Calendar/Fetch new data and than enable Push and choose to fetch hourly or every 30 minutes. In this case your iPad will stay connected to wifi even when smart cover is closed. If you select Manualy than wifi connection will be terminated when in sleep mode.
    (Not native english speaker, hope you'll understand)

  • JVM crash when using debug mode in eclipse

    Hi,
    I get a SIGSEGV every time I use debug mode in Eclipse. Sometimes after a few breakpoints, sometimes when I start the debug view.
    Have Eclipse helios and JRE 6.0_21-b06 but have also tried 1.6.0_03-b05 with same result.
    The log file (hs_error_pidxxx.log) gives the following:
    # A fatal error has been detected by the Java Runtime Environment:
    # SIGSEGV (0xb) at pc=0xff23259c, pid=2917, tid=2
    # JRE version: 6.0_21-b06
    # Java VM: Java HotSpot(TM) Server VM (17.0-b16 mixed mode solaris-sparc )
    # Problematic frame:
    # C [libc.so.1+0x3259c] strncmp+0x348
    # If you would like to submit a bug report, please visit:
    # http://java.sun.com/webapps/bugreport/crash.jsp
    # The crash happened outside the Java Virtual Machine in native code.
    # See problematic frame for where to report the bug.
    --------------- T H R E A D ---------------
    Current thread (0x0003d800): JavaThread "main" [_thread_in_native, id=2, stack(0xfe300000,0xfe380000)]
    siginfo:si_signo=SIGSEGV: si_errno=0, si_code=1 (SEGV_MAPERR), si_addr=0x00000000
    Registers:
    O0=0x00000001 O1=0x00000000 O2=0x00000001 O3=0x00000000
    O4=0x00000102 O5=0x0125d898 O6=0xfe37d3b8 O7=0xe1dd104c
    G1=0x00105000 G2=0x00007b00 G3=0x00000000 G4=0xe2947b08
    G5=0xfee6e2e8 G6=0x00000000 G7=0xfe3e0200 Y=0x00000000
    PC=0xff23259c nPC=0xff2325a0
    Top of Stack: (sp=0xfe37d3b8)
    0xfe37d3b8: 00000000 e1ebec00 ff2c1bd0 e1ebec00
    0xfe37d3c8: 011966e8 00000001 fee2e000 00001cc4
    0xfe37d3d8: 1d69c014 e2963fec 00000001 00000108
    0xfe37d3e8: 0000006e 0000006e fe37d3f8 e2947bd4
    0xfe37d3f8: e2963ff4 014e2b38 e2963ffc 00000000
    0xfe37d408: fee2e000 011afd80 01da6f38 e2963fec
    0xfe37d418: fe37d484 0125da90 0125dab8 00000002
    0xfe37d428: 00000000 e2974f88 fe37d488 e2350fd4
    Instructions: (pc=0xff23259c)
    0xff23258c: 91 ee 00 00 b4 a6 a0 01 0a bf ff e1 01 00 00 00
    0xff23259c: f8 0e 40 18 fa 0e 40 00 b2 06 60 01 80 a7 00 1d
    Stack: [0xfe300000,0xfe380000], sp=0xfe37d3b8, free space=1f4ff23259ck
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    C [libc.so.1+0x3259c] strncmp+0x348
    C [libpangoft2-1.0.so.0.501.1+0x7bdc]
    C [libswt-pi-gtk-3650.so+0x50fdc] Java_org_eclipse_swt_internal_gtk_OS__1pango_1context_1list_1families+0x74
    j org.eclipse.swt.internal.gtk.OS._pango_context_list_families(I[I[I)V+472954808
    j org.eclipse.swt.internal.gtk.OS._pango_context_list_families(I[I[I)V+0
    j org.eclipse.swt.internal.gtk.OS.pango_context_list_families(I[I[I)V+10
    j org.eclipse.swt.graphics.Device.getFontList(Ljava/lang/String;Z)[Lorg/eclipse/swt/graphics/FontData;+53
    j org.eclipse.jface.resource.FontRegistry.filterData([Lorg/eclipse/swt/graphics/FontData;Lorg/eclipse/swt/widgets/Display;)[Lorg/eclipse/swt/graphics/FontData;+67
    j org.eclipse.jface.resource.FontRegistry.createFont(Ljava/lang/String;[Lorg/eclipse/swt/graphics/FontData;)Lorg/eclipse/jface/resource/FontRegistry$FontRecord;+32
    j org.eclipse.jface.resource.FontRegistry.getFontRecord(Ljava/lang/String;)Lorg/eclipse/jface/resource/FontRegistry$FontRecord;+53
    j org.eclipse.jface.resource.FontRegistry.get(Ljava/lang/String;)Lorg/eclipse/swt/graphics/Font;+2
    j org.eclipse.jface.resource.JFaceResources.getHeaderFont()Lorg/eclipse/swt/graphics/Font;+5
    j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor$SourceAttachmentForm.createTitleLabel(Lorg/eclipse/swt/widgets/Composite;Ljava/lang/String;)Lorg/eclipse/swt/widgets/Label;+36
    j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor$SourceAttachmentForm.createControl(Lorg/eclipse/swt/widgets/Composite;)Lorg/eclipse/swt/widgets/Control;+99
    j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor.verifyInput(Lorg/eclipse/ui/IEditorInput;)V+95
    j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor.createPartControl(Lorg/eclipse/swt/widgets/Composite;)V+96
    j org.eclipse.ui.internal.EditorReference.createPartHelper()Lorg/eclipse/ui/IEditorPart;+361
    j org.eclipse.ui.internal.EditorReference.createPart()Lorg/eclipse/ui/IWorkbenchPart;+27
    j org.eclipse.ui.internal.WorkbenchPartReference.getPart(Z)Lorg/eclipse/ui/IWorkbenchPart;+65
    j org.eclipse.ui.internal.EditorReference.getEditor(Z)Lorg/eclipse/ui/IEditorPart;+2
    j org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+233
    j org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+27
    j org.eclipse.ui.internal.WorkbenchPage.access$11(Lorg/eclipse/ui/internal/WorkbenchPage;Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+8
    j org.eclipse.ui.internal.WorkbenchPage$10.run()V+29
    j org.eclipse.swt.custom.BusyIndicator.showWhile(Lorg/eclipse/swt/widgets/Display;Ljava/lang/Runnable;)V+116
    j org.eclipse.ui.internal.WorkbenchPage.openEditor(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+59
    j org.eclipse.ui.internal.WorkbenchPage.openEditor(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZI)Lorg/eclipse/ui/IEditorPart;+7
    j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility$1.run()V+41
    j org.eclipse.swt.custom.BusyIndicator.showWhile(Lorg/eclipse/swt/widgets/Display;Ljava/lang/Runnable;)V+116
    j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility.openEditor(Lorg/eclipse/ui/IWorkbenchPage;Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;)Lorg/eclipse/ui/IEditorPart;+26
    j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility.openEditor(Lorg/eclipse/debug/ui/sourcelookup/ISourceLookupResult;Lorg/eclipse/ui/IWorkbenchPage;)Lorg/eclipse/ui/IEditorPart;+201
    j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility.display(Lorg/eclipse/debug/ui/sourcelookup/ISourceLookupResult;Lorg/eclipse/ui/IWorkbenchPage;)V+3
    j org.eclipse.debug.ui.DebugUITools.displaySource(Lorg/eclipse/debug/ui/sourcelookup/ISourceLookupResult;Lorg/eclipse/ui/IWorkbenchPage;)V+5
    j org.eclipse.debug.internal.ui.elements.adapters.StackFrameSourceDisplayAdapter$SourceDisplayJob.runInUIThread(Lorg/eclipse/core/runtime/IProgressMonitor;)Lorg/eclipse/core/runtime/IStatus;+24
    j org.eclipse.ui.progress.UIJob$1.run()V+53
    J org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Z)Z
    J org.eclipse.swt.widgets.Display.runAsyncMessages(Z)Z
    J org.eclipse.ui.internal.Workbench.runEventLoop(Lorg/eclipse/jface/window/Window$IExceptionHandler;Lorg/eclipse/swt/widgets/Display;)V
    j org.eclipse.ui.internal.Workbench.runUI()I+555
    j org.eclipse.ui.internal.Workbench.access$4(Lorg/eclipse/ui/internal/Workbench;)I+1
    j org.eclipse.ui.internal.Workbench$7.run()V+55
    j org.eclipse.core.databinding.observable.Realm.runWithDefault(Lorg/eclipse/core/databinding/observable/Realm;Ljava/lang/Runnable;)V+12
    j org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Lorg/eclipse/swt/widgets/Display;Lorg/eclipse/ui/application/WorkbenchAdvisor;)I+18
    j org.eclipse.ui.PlatformUI.createAndRunWorkbench(Lorg/eclipse/swt/widgets/Display;Lorg/eclipse/ui/application/WorkbenchAdvisor;)I+2
    j org.eclipse.ui.internal.ide.application.IDEApplication.start(Lorg/eclipse/equinox/app/IApplicationContext;)Ljava/lang/Object;+99
    j org.eclipse.equinox.internal.app.EclipseAppHandle.run(Ljava/lang/Object;)Ljava/lang/Object;+135
    j org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(Ljava/lang/Object;)Ljava/lang/Object;+103
    j org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(Ljava/lang/Object;)Ljava/lang/Object;+29
    j org.eclipse.core.runtime.adaptor.EclipseStarter.run(Ljava/lang/Object;)Ljava/lang/Object;+149
    j org.eclipse.core.runtime.adaptor.EclipseStarter.run([Ljava/lang/String;Ljava/lang/Runnable;)Ljava/lang/Object;+183
    v ~StubRoutines::call_stub
    V [libjvm.so+0x15e33c]
    V [libjvm.so+0x797afc]
    V [libjvm.so+0x217704]
    V [libjvm.so+0x215d8c]
    C [libjava.so+0x10bfc] Java_sun_reflect_NativeMethodAccessorImpl_invoke0+0x18
    j sun.reflect.NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+746878888
    j sun.reflect.NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+0
    j sun.reflect.NativeMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+87
    j sun.reflect.DelegatingMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+6
    j java.lang.reflect.Method.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+161
    j org.eclipse.equinox.launcher.Main.invokeFramework([Ljava/lang/String;[Ljava/net/URL;)V+211
    j org.eclipse.equinox.launcher.Main.basicRun([Ljava/lang/String;)V+126
    j org.eclipse.equinox.launcher.Main.run([Ljava/lang/String;)I+4
    j org.eclipse.equinox.launcher.Main.main([Ljava/lang/String;)V+10
    v ~StubRoutines::call_stub
    V [libjvm.so+0x15e33c]
    V [libjvm.so+0x2012dc]
    C [java+0x3ab8]
    Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
    j org.eclipse.swt.internal.gtk.OS._pango_context_list_families(I[I[I)V+0
    j org.eclipse.swt.internal.gtk.OS.pango_context_list_families(I[I[I)V+10
    j org.eclipse.swt.graphics.Device.getFontList(Ljava/lang/String;Z)[Lorg/eclipse/swt/graphics/FontData;+53
    j org.eclipse.jface.resource.FontRegistry.filterData([Lorg/eclipse/swt/graphics/FontData;Lorg/eclipse/swt/widgets/Display;)[Lorg/eclipse/swt/graphics/FontData;+67
    j org.eclipse.jface.resource.FontRegistry.createFont(Ljava/lang/String;[Lorg/eclipse/swt/graphics/FontData;)Lorg/eclipse/jface/resource/FontRegistry$FontRecord;+32
    j org.eclipse.jface.resource.FontRegistry.getFontRecord(Ljava/lang/String;)Lorg/eclipse/jface/resource/FontRegistry$FontRecord;+53
    j org.eclipse.jface.resource.FontRegistry.get(Ljava/lang/String;)Lorg/eclipse/swt/graphics/Font;+2
    j org.eclipse.jface.resource.JFaceResources.getHeaderFont()Lorg/eclipse/swt/graphics/Font;+5
    j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor$SourceAttachmentForm.createTitleLabel(Lorg/eclipse/swt/widgets/Composite;Ljava/lang/String;)Lorg/eclipse/swt/widgets/Label;+36
    j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor$SourceAttachmentForm.createControl(Lorg/eclipse/swt/widgets/Composite;)Lorg/eclipse/swt/widgets/Control;+99
    j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor.verifyInput(Lorg/eclipse/ui/IEditorInput;)V+95
    j org.eclipse.jdt.internal.ui.javaeditor.ClassFileEditor.createPartControl(Lorg/eclipse/swt/widgets/Composite;)V+96
    j org.eclipse.ui.internal.EditorReference.createPartHelper()Lorg/eclipse/ui/IEditorPart;+361
    j org.eclipse.ui.internal.EditorReference.createPart()Lorg/eclipse/ui/IWorkbenchPart;+27
    j org.eclipse.ui.internal.WorkbenchPartReference.getPart(Z)Lorg/eclipse/ui/IWorkbenchPart;+65
    j org.eclipse.ui.internal.EditorReference.getEditor(Z)Lorg/eclipse/ui/IEditorPart;+2
    j org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+233
    j org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+27
    j org.eclipse.ui.internal.WorkbenchPage.access$11(Lorg/eclipse/ui/internal/WorkbenchPage;Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+8
    j org.eclipse.ui.internal.WorkbenchPage$10.run()V+29
    j org.eclipse.swt.custom.BusyIndicator.showWhile(Lorg/eclipse/swt/widgets/Display;Ljava/lang/Runnable;)V+116
    j org.eclipse.ui.internal.WorkbenchPage.openEditor(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZILorg/eclipse/ui/IMemento;)Lorg/eclipse/ui/IEditorPart;+59
    j org.eclipse.ui.internal.WorkbenchPage.openEditor(Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;ZI)Lorg/eclipse/ui/IEditorPart;+7
    j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility$1.run()V+41
    j org.eclipse.swt.custom.BusyIndicator.showWhile(Lorg/eclipse/swt/widgets/Display;Ljava/lang/Runnable;)V+116
    j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility.openEditor(Lorg/eclipse/ui/IWorkbenchPage;Lorg/eclipse/ui/IEditorInput;Ljava/lang/String;)Lorg/eclipse/ui/IEditorPart;+26
    j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility.openEditor(Lorg/eclipse/debug/ui/sourcelookup/ISourceLookupResult;Lorg/eclipse/ui/IWorkbenchPage;)Lorg/eclipse/ui/IEditorPart;+201
    j org.eclipse.debug.internal.ui.sourcelookup.SourceLookupFacility.display(Lorg/eclipse/debug/ui/sourcelookup/ISourceLookupResult;Lorg/eclipse/ui/IWorkbenchPage;)V+3
    j org.eclipse.debug.ui.DebugUITools.displaySource(Lorg/eclipse/debug/ui/sourcelookup/ISourceLookupResult;Lorg/eclipse/ui/IWorkbenchPage;)V+5
    j org.eclipse.debug.internal.ui.elements.adapters.StackFrameSourceDisplayAdapter$SourceDisplayJob.runInUIThread(Lorg/eclipse/core/runtime/IProgressMonitor;)Lorg/eclipse/core/runtime/IStatus;+24
    j org.eclipse.ui.progress.UIJob$1.run()V+53
    J org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Z)Z
    J org.eclipse.swt.widgets.Display.runAsyncMessages(Z)Z
    J org.eclipse.ui.internal.Workbench.runEventLoop(Lorg/eclipse/jface/window/Window$IExceptionHandler;Lorg/eclipse/swt/widgets/Display;)V
    j org.eclipse.ui.internal.Workbench.runUI()I+555
    j org.eclipse.ui.internal.Workbench.access$4(Lorg/eclipse/ui/internal/Workbench;)I+1
    j org.eclipse.ui.internal.Workbench$7.run()V+55
    j org.eclipse.core.databinding.observable.Realm.runWithDefault(Lorg/eclipse/core/databinding/observable/Realm;Ljava/lang/Runnable;)V+12
    j org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Lorg/eclipse/swt/widgets/Display;Lorg/eclipse/ui/application/WorkbenchAdvisor;)I+18
    j org.eclipse.ui.PlatformUI.createAndRunWorkbench(Lorg/eclipse/swt/widgets/Display;Lorg/eclipse/ui/application/WorkbenchAdvisor;)I+2
    j org.eclipse.ui.internal.ide.application.IDEApplication.start(Lorg/eclipse/equinox/app/IApplicationContext;)Ljava/lang/Object;+99
    j org.eclipse.equinox.internal.app.EclipseAppHandle.run(Ljava/lang/Object;)Ljava/lang/Object;+135
    j org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(Ljava/lang/Object;)Ljava/lang/Object;+103
    j org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(Ljava/lang/Object;)Ljava/lang/Object;+29
    j org.eclipse.core.runtime.adaptor.EclipseStarter.run(Ljava/lang/Object;)Ljava/lang/Object;+149
    j org.eclipse.core.runtime.adaptor.EclipseStarter.run([Ljava/lang/String;Ljava/lang/Runnable;)Ljava/lang/Object;+183
    v ~StubRoutines::call_stub
    j sun.reflect.NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+0
    j sun.reflect.NativeMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+87
    j sun.reflect.DelegatingMethodAccessorImpl.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+6
    j java.lang.reflect.Method.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;+161
    j org.eclipse.equinox.launcher.Main.invokeFramework([Ljava/lang/String;[Ljava/net/URL;)V+211
    j org.eclipse.equinox.launcher.Main.basicRun([Ljava/lang/String;)V+126
    j org.eclipse.equinox.launcher.Main.run([Ljava/lang/String;)I+4
    j org.eclipse.equinox.launcher.Main.main([Ljava/lang/String;)V+10
    v ~StubRoutines::call_stub
    --------------- P R O C E S S ---------------
    Java Threads: ( => current thread )
    0x016fec00 JavaThread "org.eclipse.jdt.internal.ui.text.JavaReconciler" daemon [_thread_blocked, id=300, stack(0xd8f00000,0xd8f80000)]
    0x01a5dc00 JavaThread "org.eclipse.jdt.debug: JDI Event Dispatcher" daemon [_thread_blocked, id=292, stack(0xd9000000,0xd9080000)]
    0x00a3bc00 JavaThread "Timer-2" daemon [_thread_blocked, id=291, stack(0xd9700000,0xd9780000)]
    0x00a41000 JavaThread "Packet Send Manager" daemon [_thread_blocked, id=290, stack(0xd9100000,0xd9180000)]
    0x01f73c00 JavaThread "Packet Receive Manager" daemon [_thread_in_native, id=289, stack(0xd9200000,0xd9280000)]
    0x00e2a400 JavaThread "Timer-1" daemon [_thread_blocked, id=287, stack(0xd9a00000,0xd9a80000)]
    0x0094c000 JavaThread "ServerConnection" [_thread_in_native, id=285, stack(0xd9800000,0xd9880000)]
    0x0094bc00 JavaThread "Process monitor" daemon [_thread_blocked, id=284, stack(0xd9300000,0xd9380000)]
    0x00895c00 JavaThread "Input Stream Monitor" daemon [_thread_blocked, id=283, stack(0xd9400000,0xd9480000)]
    0x01fef800 JavaThread "Output Stream Monitor" daemon [_thread_in_native, id=282, stack(0xd9600000,0xd9680000)]
    0x00a8b000 JavaThread "Output Stream Monitor" daemon [_thread_in_native, id=281, stack(0xd9900000,0xd9980000)]
    0x011dbc00 JavaThread "process reaper" daemon [_thread_in_native, id=280, stack(0xd9500000,0xd9580000)]
    0x01059800 JavaThread "Worker-24" [_thread_blocked, id=261, stack(0xd9c80000,0xd9d00000)]
    0x01059000 JavaThread "Worker-23" [_thread_blocked, id=260, stack(0xde580000,0xde600000)]
    0x02176000 JavaThread "Worker-22" [_thread_blocked, id=248, stack(0xddd00000,0xddd80000)]
    0x01ff0800 JavaThread "Worker-21" [_thread_blocked, id=247, stack(0xda280000,0xda300000)]
    0x00c41c00 JavaThread "Worker-20" [_thread_blocked, id=245, stack(0xdd700000,0xdd780000)]
    0x0268bc00 JavaThread "Worker-19" [_thread_blocked, id=243, stack(0xde000000,0xde080000)]
    0x0141e800 JavaThread "Worker-18" [_thread_blocked, id=242, stack(0xdda00000,0xdda80000)]
    0x019aec00 JavaThread "Worker-16" [_thread_blocked, id=227, stack(0xddf00000,0xddf80000)]
    0x0143b800 JavaThread "org.eclipse.jdt.internal.ui.text.JavaReconciler" daemon [_thread_blocked, id=223, stack(0xddb00000,0xddb80000)]
    0x01022800 JavaThread "org.eclipse.jdt.internal.ui.text.JavaReconciler" daemon [_thread_blocked, id=219, stack(0xdde00000,0xdde80000)]
    0x00a58800 JavaThread "Worker-12" [_thread_blocked, id=211, stack(0xde680000,0xde700000)]
    0x018c5400 JavaThread "pool-1-thread-5" [_thread_blocked, id=187, stack(0xd9d80000,0xd9e00000)]
    0x013cdc00 JavaThread "pool-1-thread-4" [_thread_blocked, id=186, stack(0xda380000,0xda400000)]
    0x002a4c00 JavaThread "pool-1-thread-3" [_thread_blocked, id=185, stack(0xddc00000,0xddc80000)]
    0x0282b400 JavaThread "pool-1-thread-2" [_thread_blocked, id=184, stack(0xd9e80000,0xd9f00000)]
    0x018c6400 JavaThread "pool-1-thread-1" [_thread_blocked, id=183, stack(0xd9f80000,0xda000000)]
    0x00973000 JavaThread "Timer-0" daemon [_thread_blocked, id=75, stack(0xdd800000,0xdd880000)]
    0x00ab8000 JavaThread "Thread-39" daemon [_thread_blocked, id=74, stack(0xdd500000,0xdd580000)]
    0x00dc1400 JavaThread "Worker-6" [_thread_blocked, id=73, stack(0xdd900000,0xdd980000)]
    0x004db000 JavaThread "Thread-32" daemon [_thread_in_native, id=66, stack(0xda4d0000,0xda4e0000)]
    0x011eb000 JavaThread "[ThreadPool Manager] - Idle Thread" daemon [_thread_blocked, id=43, stack(0xdd400000,0xdd480000)]
    0x003e6400 JavaThread "Bundle File Closer" daemon [_thread_blocked, id=27, stack(0xde100000,0xde180000)]
    0x007c6c00 JavaThread "org.eclipse.jdt.internal.ui.text.JavaReconciler" daemon [_thread_blocked, id=26, stack(0xde200000,0xde280000)]
    0x001ce800 JavaThread "Java indexing" daemon [_thread_blocked, id=24, stack(0xde380000,0xde400000)]
    0x00191400 JavaThread "Worker-0" [_thread_blocked, id=21, stack(0xe2580000,0xe2600000)]
    0x01235400 JavaThread "Worker-JM" [_thread_blocked, id=20, stack(0xe2380000,0xe2400000)]
    0x007ff400 JavaThread "[Timer] - Main Queue Handler" daemon [_thread_blocked, id=19, stack(0xe2480000,0xe2500000)]
    0x0074e000 JavaThread "Framework Event Dispatcher" daemon [_thread_blocked, id=17, stack(0xe2680000,0xe2700000)]
    0x00390000 JavaThread "Start Level Event Dispatcher" daemon [_thread_blocked, id=16, stack(0xe2780000,0xe2800000)]
    0x005c9800 JavaThread "State Data Manager" daemon [_thread_blocked, id=15, stack(0xe2880000,0xe2900000)]
    0x00124800 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=13, stack(0xe2a80000,0xe2b00000)]
    0x00122400 JavaThread "CompilerThread1" daemon [_thread_blocked, id=12, stack(0xe2b80000,0xe2c00000)]
    0x00110c00 JavaThread "CompilerThread0" daemon [_thread_blocked, id=11, stack(0xe2c80000,0xe2d00000)]
    0x00118000 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=10, stack(0xe2d80000,0xe2e00000)]
    0x00107c00 JavaThread "Finalizer" daemon [_thread_blocked, id=9, stack(0xe2e80000,0xe2f00000)]
    0x00106400 JavaThread "Reference Handler" daemon [_thread_blocked, id=8, stack(0xe2f80000,0xe3000000)]
    =>0x0003d800 JavaThread "main" [_thread_in_native, id=2, stack(0xfe300000,0xfe380000)]
    Other Threads:
    0x00103c00 VMThread [stack: 0xe3080000,0xe3100000] [id=7]
    0x0012ec00 WatcherThread [stack: 0xe2980000,0xe2a00000] [id=14]
    VM state:not at safepoint (normal execution)
    VM Mutex/Monitor currently owned by a thread: None
    Heap
    PSYoungGen total 40704K, used 18973K [0xf6000000, 0xf9400000, 0xfb800000)
    eden space 29568K, 59% used [0xf6000000,0xf714b120,0xf7ce0000)
    from space 11136K, 11% used [0xf7e40000,0xf7f7c5c8,0xf8920000)
    to space 10432K, 0% used [0xf89d0000,0xf89d0000,0xf9400000)
    PSOldGen total 90112K, used 71968K [0xeb400000, 0xf0c00000, 0xf6000000)
    object space 90112K, 79% used [0xeb400000,0xefa48298,0xf0c00000)
    PSPermGen total 73728K, used 71408K [0xe3400000, 0xe7c00000, 0xeb400000)
    object space 73728K, 96% used [0xe3400000,0xe79bc298,0xe7c00000)
    Dynamic libraries:
    0x00010000      /proj/atelteadm/tools/jdk1.6.0_21/bin/java
    0xff3a0000      /lib/libthread.so.1
    0xff370000      /proj/atelteadm/tools/jdk1.6.0_21/bin/../jre/lib/sparc/jli/libjli.so
    0xff350000      /lib/libdl.so.1
    0xff200000      /lib/libc.so.1
    0xff390000      /platform/SUNW,Sun-Fire-V445/lib/libc_psr.so.1
    0xfe400000      /proj/atelteadm/tools/jdk1.6.0_21/jre/lib/sparc/server/libjvm.so
    0xff1d0000      /lib/libsocket.so.1
    0xff1f0000      /usr/lib/libsched.so.1
    0xff1b0000      /lib/libm.so.1
    0xff180000      /usr/lib/libCrun.so.1
    0xff160000      /lib/libdoor.so.1
    0xff080000      /lib/libnsl.so.1
    0xfef80000      /lib/libm.so.2
    0xff050000      /lib/libscf.so.1
    0xff140000      /lib/libuutil.so.1
    VM Arguments:
    jvm_args: -Xms128m -Xmx256m -XX:MaxPermSize=128m
    java_command: /proj/atelteadm/tools/eclipse_dist_jcat/e4e_fix//plugins/org.eclipse.equinox.launcher_1.1.0.v20100507.jar -os solaris -ws gtk -arch sparc -showsplash -launcher /proj/atelteadm/tools/eclipse_dist_jcat/e4e_fix/eclipse -name Eclipse --launcher.library /proj/atelteadm/tools/eclipse_dist_jcat/e4e_fix//plugins/org.eclipse.equinox.launcher.gtk.solaris.sparc_1.1.0.v20100503/eclipse_1307.so -startup /proj/atelteadm/tools/eclipse_dist_jcat/e4e_fix//plugins/org.eclipse.equinox.launcher_1.1.0.v20100507.jar -exitdata 74000027 -install /proj/atelteadm/tools/eclipse_dist_jcat/e4e_fix -nl en_US -showlocation -vm /proj/atelteadm/tools/jdk1.6.0_21//bin/java -vmargs -Xms128m -Xmx256m -XX:MaxPermSize=128m -jar /proj/atelteadm/tools/eclipse_dist_jcat/e4e_fix//plugins/org.eclipse.equinox.launcher_1.1.0.v20100507.jar
    Launcher Type: SUN_STANDARD
    Environment Variables:
    PATH=/usr/local/opt/apssystem/aps_9.1/bin:/proj/aps/bin:/home/ehollis/.afs/0/rbin:/home/ehollis/.afs/0/pbin:/env/seli/bin:/home/ehollis/.afs/0/ibin:/usr/atria/bin:/usr/afsws/bin:/usr/bin:/usr/X/bin:/usr/dt/bin:/usr/openwin/demo:/usr/openwin/bin:/usr/dt/bin:/usr/ccs/bin:/usr/sbin:/sbin:/usr/ucb:/opt/seli/bin:/opt/sge/seli/etegrid/bin:/opt/sge/seli/bctgrid/bin:/usr/ucb:.
    LD_LIBRARY_PATH=/proj/atelteadm/tools/jdk1.6.0_21/jre/lib/sparc/server:/proj/atelteadm/tools/jdk1.6.0_21/jre/lib/sparc:/proj/atelteadm/tools/jdk1.6.0_21/jre/../lib/sparc:/app/gtk+/2.2.2/lib:/usr/sfw/lib/mozilla/
    SHELL=/bin/tcsh
    DISPLAY=:16.0
    HOSTTYPE=sun4
    OSTYPE=solaris
    MACHTYPE=sparc
    Signal Handlers:
    SIGSEGV: [libjvm.so+0x87b320], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
    SIGBUS: [libjvm.so+0x87b320], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
    SIGFPE: [libjvm.so+0x1c4174], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
    SIGPIPE: SIG_IGN, sa_mask[0]=0x00000000, sa_flags=0x00000000
    SIGXFSZ: [libjvm.so+0x1c4174], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
    SIGILL: [libjvm.so+0x1c4174], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
    SIGUSR1: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
    SIGUSR2: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
    SIGQUIT: [libjvm.so+0x7560bc], sa_mask[0]=0xffbffeff, sa_flags=0x00000004
    SIGHUP: [libjvm.so+0x7560bc], sa_mask[0]=0xffbffeff, sa_flags=0x00000004
    SIGINT: [libjvm.so+0x7560bc], sa_mask[0]=0xffbffeff, sa_flags=0x00000004
    SIGTERM: [libjvm.so+0x7560bc], sa_mask[0]=0xffbffeff, sa_flags=0x00000004
    SIG39: [libjvm.so+0x759ae8], sa_mask[0]=0x00000000, sa_flags=0x00000008
    SIG40: [libjvm.so+0x1c4174], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c
    --------------- S Y S T E M ---------------
    OS: Solaris 10 10/08 s10s_u6wos_07b SPARC
    uname:SunOS 5.10 Generic_142900-13 sun4u (T2 libthread)
    vm_info: Java HotSpot(TM) Server VM (17.0-b16) for solaris-sparc JRE (1.6.0_21-b06), built on Jun 22 2010 01:34:33 by "" with Workshop 5.8
    Any clues anyone?

    get a SIGSEGV every time I use debug mode in EclipseSo if you create a hello world program and then debug it, it crashes?
    If yes then the causes would be
    1. The VM(s) binaries are corrupted. Plural as it depends on how you run Eclipse.
    2. Something else installed on your system at the OS level (or at least always running) is corrupt or is corrupting the OS.
    3. A hardware failure.

  • Items in shared mailbox are not visible when using cached mode in Outlook 2013

    Hi all,
    When using Outlook 2013 working with the users own mailbox works great, but when a user connects an additional mailbox to its mailbox, this mailbox is shown correctly, but it contains no items. The folder list is shown correctly, but there are no items to be
    seen.
    These users (I have seen it with 3 different users and 2 shared mailboxes already) have full access to these mailboxes (Exchange 2010), but somehow the items aren't shown... When these users turn off cached mode, it works fine and when they use Outlook 2010
    it also works fine, but using Outlook 2013 with cached mode will only show their own items and not the items in an additional shared mailbox.
    What is the cause of all this?
    Kind regards,
    Erik

    Maybe something interesting...
    When looking at article http://support.microsoft.com/kb/982697/en-us
    I saw that Outlook 2013 by default caches everything and that's what I wanted. I tested however adding this regkey to see what happened and after that the email shows up in the mailboxes... Somehow the mail from shared mailboxes doesn't want to be
    cached...
    Does anyone know what this could be? I want everything to be cached, also the shared mailboxes but somehow this doesn't work and it does when using Outlook 2010....

  • Exclaimer manager signature does not update sent items for outlook 2013 clients when using cached mode

    Hi
    I have Signature Manager Exchange Edition 2.0.3.0 installed on the hub servers.
    I have enabled  Sent Items update.
    some clients are not getting signature update in the sent items of outlook while using cached mode.
    from OWA, and MS Outlook when connected online, the signature is updated in the sent items.
    I have two CAS servers and two mailbox servers. all with Exchange 2013 SP1
    I tested each CAS server for the URLs of Autodiscover and EWS, with no errors or warnings.
    I also test Autodiscover through
    https://testconnectivity.microsoft.com . I go successful result.
    Outlook clients are updated to the latest version 15.0.4701.1000
    for outlook clients; I deleted outlook profile, deleted outlook folder in the user profile, re-created the  outlook profile, with no luck.
    from Exclaimer event logs on the Hub servers. the sent items update is successfully updating clients. below is the screenshot of an event for one email message which is successfully updated from exclaimer but it did not update on the client outlook while
    using cached mode.
    Since the issue is with multiple users, I am searching for a centralized solution 
    Mashhour Faraj

    Dear Mashhour
    Here you go 
    Employees can see their email signatures and disclaimers
    With Exchange 2013, a Microsoft Outlook user can’t see any added email signatures or disclaimers as they are added to an email when it passes through the Exchange server.
    Signature Manager Exchange Edition lets email users see their email signature and corporate disclaimer within the Sent Items of their inbox, giving them visual confirmation of the processed email
    Source - 
    http://blog.exclaimer.com/exclaimer-signature-manager-vs-microsoft-exchange-2013/
    Updating to the latest version of signature manager exchange edition will help you to resolve this problem for sure 
    Or you need to contact them to find a solution on this .
    I'm pretty much sure that this problem is related with some version mismatch on their s/w on exchange 2013 which is causing this issue.
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
    (MVP)

  • Outlook 2010 -Mailbox Cleanup wizard does not start when using cached mode

    We are using Outlook 2010 with Exchange 2003 server.
    Currently all users are using online mode, but for some problem, I need to persuade the users to change to use cached mode.
    Recently we find that when user
    mailbox reaches its size limit and try to send an email message in Outlook 2010 that is in cached mode, the email message stays in the
    Outbox and the Mailbox Cleanup wizard does not start. It just prompts
    for "send and receive error". As most of the user would not look for what the error is referring and just call IT to fix. Even worst is, they didn't realize that the mail is still in outbox.
    I find the KB2544027 describing this issue but was not available and suggest to install 2596485.
    http://support.microsoft.com/kb/2544027/en-us
    I've try to install the hotfix and install Office 2010 SP2 but just doesn't work.
    Does anyone know how can I fix it?
    Thanks!

    Hi,
    Based on my research from the internal resource, this issue has been fixed in build 14.0.6126.5000 or less. I suppose that the hotfix not available because it has been involved in the release.
    I’d like to confirm your Office 2010 build number so that we can conduct a deeper analysis on this issue.
    In addition, make sure you have installed the latest update for Office 2010.
    Best Regards,
    Steve Fan
    TechNet Community Support

  • JDBC Connection Reset when using many processes on 64 bit system

    Hi,
    we've a annoying JDBC connection problem since we migrated our Java server to a 64 bit operating system. Here our environment.
    Database Machine:
    Oracle 10g
    Linux 32 Bit (but same problem on 64 Bit)
    Application Servers Machine:
    JDBC driver 11.1.0.6
    SUN Java 1.6.0_06 64bit
    Linux 64 bit (SLES 10 SP2)
    We have 6 different Java server processes (but with the same code) which all create some connections to the same database (running on a different Hardware). All 6 Java server processes starting at the same time (via scripts).
    Everything was fine, until we migrated the application server machine from 32 bit Linux to 64 bit Linux. From this day on, the half (or one more or less) of our application server processes can't longer connect to the database. The application server processes which have the problem product the following stack trace:
    java.sql.SQLRecoverableException: I/O Exception: Connection reset
    at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:281)
    at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:118)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:224)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:296)
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:611)
    at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:455)
    at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:494)
    at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:199)
    at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:30)
    at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
    at java.sql.DriverManager.getConnection(DriverManager.java:582)
    at java.sql.DriverManager.getConnection(DriverManager.java:154)
    at com.aaaa.utils.db.DbConnectionPool.<init>(DbConnectionPool.java:130)
    It looks like a network problem with the system but all other network stuff works without problems, between the two machines.
    - We use the thin JDBC driver (no OCI)
    - No firewalls are active on both systems
    - Both systems are in the same subnet connected to the same switch
    - The DNS configuration on both systems are ok (forward and reverse)
    - We've found the same problem on different application-server/database-server pairs with 64 bit application server hardware - but not all of our 64 bit server systems have this problem.
    - When running application server process and database on the same system (connecting via localhost) the problem does not longer appear.
    - The same database machine connected from a 32 bit application server (with 6 different java processes starting at the same time) works without a problem.
    We've tried a lot of things to isolate the problem - but with no success.
    - Same problem with SUN Java 1.6.0_06 32 bit (on 64 bit Linux)
    - Same problem with SUN Java 1.6.0_15 (32 and 64 bit)
    - Played with some JDBC connection properties (oracle.jdbc.TcpNoDelay, oracle.jdbc.ReadTimeout, oracle.net.CONNECT_TIMEOUT, oracle.net.disableOob, oracle.jdbc.RetainV9LongBindBehavior, oracle.jdbc.StreamChunkSize) without a positive result.
    - We've updated Linux network driver
    - We've changed to an completeky other NIC
    - We've tried an other Linux 64 distribution
    - We've increased the PROCESSES parameter in the init.ora
    - We've tried the JDBC driver 11.1.0.6
    - We've tried the _g version of the JDBC driver, but the debugging output simply tell us "Connection Reset" without a hint why.
    - We've tried a more complex JDBC connect string (
    "jdbc:oracle:thin:@(DESCRIPTION=" +
    "(ADDRESS_LIST=" +
    "(ADDRESS=(PROTOCOL=TCP)" +
    "(HOST=host)" + =
    "(PORT=port)" +
    ")" +
    ")" +
    "(CONNECT_DATA=" +
    "(SERVICE_NAME=sid)" +
    "(SERVER=DEDICATED)" +
    ")" +
    Nothing of this things helped us to isolate the problem.
    When we start our application server processes with a long pause (>1 min) between every process start. The problem does not occure. When we start only one application server with the same number of connections as the 6 different application server processes, everything works fine.
    We have absolute no idea why
    - this only occures on 64 bit Linux
    - independent if it's a 32 bit or 64 bit JVM
    - does not occure on all 64 bit application server machines / database machine pairs
    - never occure on the same 64 bit app server hardware when using a 32 bit Linux
    - using the Oracle JDBC 10g driver (10.xxx) there is no problem (but because of other issues, we need to use the JDBC 11g driver)
    Does anybody has an idea what our problem is?
    Thanks in advance,
    greetings

    I was recently struggling with this exact same problem. I opened a ticket with Oracle and this is what they told me.
    java.security.SecureRandom is a standard API provided by sun. Among various methods offered by this class void
    nextBytes(byte[])
    is one. This method is used for generating random bytes. Oracle 11g JDBC drivers use this API to generate random number during
    login. Users using Linux have been encountering SQLException("Io exception: Connection
    reset").
    The problem is two fold
    1. The JVM tries to list all the files in the /tmp (or alternate tmp directory set by -Djava.io.tmpdir) when
    SecureRandom.nextBytes(byte[]) is invoked. If the number of files is large the
    method takes a long time
    to respond and hence cause the server to timeout
    2. The method void nextBytes(byte[]) uses /dev/random on Linux and on some machines which lack the random
    number generating hardware the operation slows down to the extent of bringing the whole login process to
    a halt. Ultimately the the user encounters SQLException("Io exception:
    Connection reset")
    Users upgrading to 11g can encounter this issue if the underlying OS is Linux which is running on a faulty hardware.
    Cause
    The cause of this has not yet been determined exactly. It could either be a problem in
    your hardware or the fact
    that for some reason the software cannot read from dev/random
    Solution
    Change the setup for your application, so you add the next parameter to the java command:
    -Djava.security.egd=file:/dev/../dev/urandom
    We made this change in our java.security file and it has gotten rid of the error.

  • DCIteratorBinding reset when using go link

    When I use a go link to step to another page in my application the DCIteratorBinding on the new page is always reset (I think the query is always automatically executed).
    This does not happen when using a control flow case.
    It's a very basic item, so I hope somebody can help.

    A go link is not really designed for use within an application. It's supposed to be used for external URLs. So if you use a go link to jump to a page in your app it's the same as the user clearing the URL and starting again with that new URL which, most likely will essentially start a new session. So it's no surprise that everything refreshes.
    So why use a go link, just use a control flow case and a commandLink.

Maybe you are looking for

  • Unspecified error while installing sql server management studio 2012.

    HI, I am trying to install microsoft sql server 2012 service pack 1 management studio express. Its throwing "unspecified error". I am using "sqlmanagementstudio_x64_ENU.exe". Iam using .net framework 3.5.1. Repies will be appreciated. Thanks, Rakesh.

  • Track changes made to existing comments

    How can I track changes made to comments in Word 2010? It seems that with track changes on, you can tell which user made which edits within the body of a document, but track changes fails to track changes made to content within comments.

  • PeopleTools - LDAP (MSAD) integration

    I'm tooling around with creating a process to create a shell/disabled Active Directory (AD) account when a new person is hired in the HR database. I've already successfully utilized the LDAP_SEARCH and LDAP_MODIFY business interlinks to read from and

  • Windows Hello: no more passwords on post-its?

    One of the much-anticipated features of Windows 10 is Windows Hello, a biometric sign-in feature that allows you to authenticate using your face, eye, or fingerprint. You read correctly, users just need to remember to bring their face to work to log

  • Macbook cannot view specific websites

    I am running OS X 10.4.11 on an Intel-based Macbook. I cannot view some specific websites, like www.facebook.com, www.commonapp.org, and apple's own discussion forums, regardless of the browser. I have used Firefox, Safari, and Opera. All have the sa