Reset WLC Module to factory defaults from router cli

I have a wireless lan controller module in a 2811 router that has a previous config and need to reset it to factory defaults from the router cli.  Every time I try a "service-module wlan-controller 1/0 reset" I don't see any output on the screen indicating the boot process that would allow me to interrupt it and reset a password.
I tried following this doc but had no luck:
https://supportforums.cisco.com/docs/DOC-3668
Anyone have any experience with this?

Hi Joe,
Not sure, but this doc does list a couple of different steps
http://www.cisco.com/en/US/products/ps6308/products_password_recovery09186a008071faa7.shtml#topic1
Cheers!
Rob

Similar Messages

  • What would you change from factory default on router

    Newbie here. For all the master techs out there. What all should be changed from factory defaults on router to make it as safe as possible? thanks

    1. Change the router password (default "admin") on the Adminstration tab. Choose a good longer password.
    2. Enable wireless security WPA or WPA2 in the Personal/PSK variant.
    3. Choose a good passphrase, if possible use a random generated 63 character string.
    That's about what you have to do to secure the router and the wireless.

  • Factory Default from Call Manager

    I have a client which is private. They have many type phones that we need to change with new one. I want erase all information like call history, Itl files, tftp servers etc.
    My first question is : What can I do to delete all these kind of information. My first idea is factory default? Can we make differently? 
    Second question is : If we can success that with anyone's answer , Can we send this command to all 7841 ip phones from Call Manager 10.5.1?
    Second question is important part of work. We must do approximately 500 phones which I need to change with new phones. I want to send this command from Call Manager?
    Regards..

    Just go the phones erase call history/network config/ITL files etc the settings you need to delete. I dont think there will be a bulk way to do some of the items.
    But If you must erase everything from the phone, you will need to reset the phone to factory defaults.
    There is no easy/bulk/remote way to factory reset the phones. You will need to do it from the phones itself by pressing the sequence of keys.
    Still only possible way would be to setup a DEMO cucm and connect the CUCM/phones to an isolated 24/48 port switch/switches. Factory reset them and let them download the new firmware files from the demo system.
    They will still have TFTP server defined in the end (of the DEMO server) and without which you cant get the phone to download the firmware.
    -Terry
    Please rate all helpful posts

  • Reset Aironet 1231 to factory default

    I have a (old) 1231 that I would like to reuse, but no one remembers the password.  Anyone know how to recover a password from this model AP or how to reset the device to factory default?
    Thanks in advance -
    Kristin

    Hi Kristin,
    Here is a link that will help you reset the ap.
    http://www.cisco.com/en/US/products/hw/wireless/ps430/products_password_recovery09186a00800949d0.shtml
    There is no way to change the password, without logging into the ap. So you will need to reset it..
    "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin

  • I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer. Any ideas?

    I made the mistake of resetting my iPod to factory defaults. Now it will only partially sync to my music library. I continually get an error message saying that certain songs are not authorized for my computer, although they are in the iTunes library on the computer and will play. It's these songs that won't transfer to the iPod. I have deauthorized and re-authorized the computer but no joy. Any ideas?

    Hello there DesertRat71,
    I was thinking that some of the songs in your library may have been purchased under a different apple id. You have already done the first thing I would have done by de authorizing and re authorizing. To verify this, highlight one of the songs that will not sync over and use File>Get Info. Here is the help menu link for it if you need it help://bookmark='https://help.apple.com/itunes/mac/11.0/help/index.html?localePa th=English.lproj#itns2937'
    In the Summary section there will be an Apple ID entry. If it shows something different than what you are currently using then I recommend signing into the Apple ID it shows and authorizing the computer for that one as well.
    All the best,
    Sterling

  • How do you reset iMovie back to factory default

    Hi,
    I have a Mac pro where I am experiencing the "slow audio" problem.
    I have just porchased a Mac Book,and importing video/audio with no issues.(latest software installed on both systems).
    Is there a way to reset iMovie back to "factory defaults"?
    Many thanks.
    Eli

    Bev hi,
    Many thanks for your prompt reply.
    Fantastic,all works as it should.
    If any other users out there experience "slow" audio or the audio lagging behind the video when importing HD (Sony) tapes into iMovie,try Beverley's tip.It worked for me.
    Cheers
    Eli

  • Ipod touch 4th generation became too slow after ios 6. How can I rollback to iOS 5 or what else can be done. I already did  master reset and restored to factory default but no improvement.

    Ipod touch 4th generation became too slow after ios 6. How can I rollback to iOS 5 or what else can be done. I already did  master reset and restored to factory default but no improvement.

    You cannot downgrade

  • After resetting my MAC to factory default how do I reinstall my Creative Suite 5?

    After having to reset my Macbook Pro to factory default, do I need a new product code to reinstall my Creative Suite 5?

    Yes. You have to erase the device in Settings>General>Reset>Erase all content and settings.
    iCloud: Restore your iOS device from iCloud - Support - Apple

  • Reset fax 810 to factory defaults

    Does anyone know how to reset the LC 810 Fax machine to factory default?  An unknown user in the office setup Dept IDs and no one the correct login.  The only message on LCD is "Enter Dept ID".

    1. Press Command and R keys while your Mac is starting.
    2. Open Disk Utility, choose Macintosh HD in the sidebar and erase the drive.
    3. Install Mac OS X. Your Mac will download OS X from the App Store, so it will take more time

  • Reset FC 3510 to Factory Defaults

    I am trying to configure a Storedge 3500 however I am unable to access the device by using sccli. Is there anyway for me to access the controller configuration and channel settings without using a serial cable. I tried to use ethernet but the IP address of the controller is not configured. Basically all I want to do is just get it back to its factory defaults. Is there anyway to force it to reset? I tried to tip hardwire but it just sat there saying connected. Thanks in advance for your help!

    Sorry about the confusion. It is a 3510 FC array. I've tried to tip into it with a serial cable both from the server and from a laptop with no luck. I know im using the right settings and the cable is good because I was able to tip into our other system's raid with no problems at all. I've tried sccli, tip, terminal session from windows laptop and the lan connection all with no results. I'm not really worried about data loss so I'm willing to do whatever it takes to get these controllers working again. Also I noticed that both controllers are giving me an amber light in the back where the status is indicated however our working systems has one blinking green and one solid green. Thanks, this raid is really starting to be a pain for me.

  • Reset OS X to factory defaults

    Can someonen tell me what the power on keyboard combo is to  reset ML to factory defaults. I want to wipe my MBP clean and I can't find it anywhere on  here.
    TIA,
    Peter

    1. Press Command and R keys while your Mac is starting.
    2. Open Disk Utility, choose Macintosh HD in the sidebar and erase the drive.
    3. Install Mac OS X. Your Mac will download OS X from the App Store, so it will take more time

  • I can not reset my ipad to factory default. Any help appreciated

    I have taken over my dads ipad, but cannot download any apps as he cannot remember his apple id password.
    I have tried to reset ipad to factory default with no luck

    Read this:
    http://support.apple.com/kb/HT5818

  • HT1414 How to reset iphone 2g to factory default

    I got iphone 2g with Jail Break. How to reset to factory default.

    Sorry, problems this jailbroken devices can't be discussed here, due to the Terms of Use.
    You'll have to ask those people who helped you to modify the software.

  • Reset iPhone 5 to factory defaults

    On the iPhone 5, does "Settings / General / Reset / Erase All content and Settings" restore the iPhone to factory defaults, or just reset the settings but not actually delete all data &/or set back to factory settings?
    Thanks!

    If your current device has an iOS version that's older than the one used when making a backup, then you won't be able to perform a restore.  The fix is easy, simply update the iOS of your device to the most current one and perform the restore again.
    BTW, a restore does not involve the iOS.

  • HT201441 This phone is from a former employee who was terminated, i cannot access this account as the assinged number is changed how do i reset this phone to factory default.

    Need to set this company phone back to default settings.

    As far as I know, you can't.  Contact the former employee and inform them that you are starting a collections proceeding against them since they returned the phone in a non-working condition unless they cooperate by erasing the phone and removing it from their account as outlined in the article you were just reading.

Maybe you are looking for

  • Topic consumer does not show up in destination after WLS restart

    Hello JMS cracks           <p>We have following setup: <br>           - 1 Admin and 2 Managed WLS 8.1 SP4 on same host:<br>           - distributed topic destination<br>           - external jms topic subscriber client (using weblogic.jar)           

  • I cannot get a sound to play on arrival of new mail, default or custom.

    I am running on a Linux box under CentOS 5.10. If I select a .wav file in a file browser screen it plays just fine. The same file is silent when used as a custom mail arrival sound. The default sound also does not play. As far as I know I have set up

  • Recursive select in user_constraints

    I have 5 tables (or more) in master detail relation (five levels). Is possible to write recursive select cross user_constraints table to get all this levels from select? my wrong try: select table_name,R_CONSTRAINT_NAME,CONSTRAINT_NAME from user_cons

  • To extract data from t.code mm02

    Hi,    I want to write the program to extract the data from t.code mm02 for clsiification and unit of measure .      In classification there are charactersitcs and values which i want to extract. And in unit of measure i want to extract the data . pl

  • Install License without a Floppy Drive

    I just ran a new server installation and I can't install the licenses because my server doesn't have a floppy drive. Is there another way to install the license?