Reseting SSH username and password

Hi,
I have configured Cisco Secure ACS (Version: 5.3.0.40.6).I am able to login with web access.
I forgot my ssh credential, Can any one tell me how to reset ssh username and password?
Or how can we configure through web access?
Thanx
Arjun

jasonwryan wrote:...and then wait to get hacked.
Sure, but this wasn't the point .
jasonwryan wrote:Seriously, set up public key authentication: it is simple and works like a charm on Android.
100% ACK.
Last edited by Tarqi (2014-03-27 01:58:36)

Similar Messages

Reset Admin UserName and Password?

Is there a way to reset you Admin username and password? Do I have to re-install?

Following information is from Installation Guide, Troubleshooting section. It seems to indicate that you have to re-install.
If you do not remember the administrative user name that was supplied during installation, try the user name admin. This is the default user name specified in the server configuration dialog during installation.
If you still cannot determine the user name, look in the following file:
domain_config_dir/domain1/admin-server/config/admpw
This file contains the administrator's user name followed by the encrypted form of the administrative user's password.
If you do not remember the administrator's password, then you will need to uninstall and reinstall the application server.
If you do not remember the administrator's password, then you can delete the administrative domain using the delete-domain subcommand of asadmin and create a new domain with a new administrative password.

Keep getting error message "user name or password for aol is incorrect". I have reset both username and password and still can't get my mail. This problem only seems to exist in the evening.

Keep getting error message "user name or password for aol is incorrect
". Have reset both and problem still exists. Problem appears to be in the evening hours only.

reset the password to re confirm that that isn't the issue

Reset blackberry username and password

Hi All,
I have Blackberry Z10 mobile.
I have forgotten the password of the device. So I used the password reset link
https://blackberryid.blackberry.com/bbid/recoverpassword/
However this is sending the password reset link to my device email id. That email id does not exist anymore.
I am in a deadlock where I don’t remember the device password. When I try to reset this password, the temporary password is sent to my blackberry user id (email id), which no longer exists.
Please advice what I should do.
thanks,
anita

You need to create a new BlackBerry ID for your device.
or you can retrieve your hosted email account if you still have your old device with you.

TS1369 resetting Ipod username and password

I was given a used Ipod and I would like to put my credtials on the Ipod, how can this be done.

Hi Tim
I checked the event view and this is the error I am getting the following error under Businessobject_cms: (General)
CMS is unstable and will shut down immediately. Reason: BusinessObjects Enterprise CMS: Unable to connect to the CMS system database "BOE120:localhost:3306". Reason: Access denied for user 'sa'@'localhost' (using password: YES)
Also another error under businessobject_cms (services)
The root server reported an error Initialization Failure. (Reason: BusinessObjects Enterprise CMS: Unable to connect to the CMS system database "BOE120:localhost:3306". Reason: Access denied for user 'sa'@'localhost' (using password: YES)BusinessObjects Enterprise CMS: Unable to connect to the CMS system database "BOE120:localhost:3306". Reason: Access denied for user 'sa'@'localhost' (using password: YES) CDatabase::Open failure.
Also there is an error under Server Intellegence Agent since iit has started and stopped several times:
[User Name: XXXXXX]
Server Intelligence Agent: server CX0802.CentralManagementServer is considered failed because it has stopped 5 time(s) within 60 minute(s). Please restart this server.
Please let me know if you can get something out of it
Thanks and regards
Edited by: SAP_LCCHS on Jul 15, 2011 10:25 AM

Username and password reset

Can anyone tell me how to reset my username and password
from a free 9i version that i have downloaded.
do i have to download the database again or what?

If you have to get connection to the server directly you ca do this:
For Linux/Unix
ORACLE_SID=database_sid
export ORACLE_SID
sqlplus /nolog
conn / as sysdba
alter user <user_name> identified by <password>;
For Windows
SET ORACLE_SID=database_sid
sqlplus /nolog
conn / as sysdba
alter user <user_name> identified by <password>;
Joel Pérez

Need help resetting or changing my admin username and password without the installation disc

I accidentally clicked on the check box that is located in system preferences in accounts that says "Allow user to administer this computer" and unchecked it. So the account that I set up the user name and password to is not the administer anymore and I don't know what account is. So now every time I want to make changes to anything and click on the lock button it will not accept my username and password. So how do I reset my username and password for the administer without the installation disc and without losing any files or folders????
Message was edited by: ashkonnor8808

Those changes require an installation DVD. However, see:
Forgot Your Account Password
For Snow Leopard and earlier with installer DVD
Mac OS X 10.6- If you forget your administrator password
For Snow Leopard and earlier without installer DVD
How to reset your Mac OS X password without an installer disc | MacYourself

Username and password do not match

I can no longer authenticate. I get "Username and password do not match".
Is there a file I can edit to reset the username and password?
Thanks in advance,
Mike Britton

We should take a look at the log files to see what's really going on but if you haven't done anything with the installation yet then "reinstalling" is very easy.
In the directory where you launched the jar file, you should find a directory named "crx-quickstart". Simply rename this directory to "crx-quickstart.old" and restart the jar file. Your new environment will be ready in a couple of minutes. Keep the old directory and look into the [your directory]\crx-quickstart\logs directory for details on your original problem.

How do I change a previously saved (in Firefox) online username and password that has now changed?

I try to navigate to the login OR homepage of a password protected site and it sends me into a loading loop or "invalid user name" error page (depending on which portal I attempt to enter through). How do I reset the username and password saved in Firefox? I tried deleting the sites and associated passwords in the security options tab already and it hasn't worked.

Arantha,
Click the document name at the top of the Pages window and choose Browse Versions. See if any of your late changes are there. Also, use Finder to search for files with a similar name, since it's possible that your latest changes were made to a copy of the document and you may be able to find that copy if that's the case.
Jerry

Changing usernames and passwords

This is about Adobe Digital Editions. I have multiple accounts with different usernames and passwords. I don't remember any of them. I contacted Adobe and they reset my username and password. Now I have one. However, I don't know how to change the usernames or passwords on my computers at home and at work so they have the correct usernames and passwords. Right now, I can't access anything I saved under ADE. Any advice?

Moved to Adobe Digital Editions

Trouble resetting i cloud username and password?

Yup the iPhone won't let you change iCloud setting on an iPhone. I resolved it by logging into Apple tech support afterwards and creating a new iCloud account with it's own username and password and I was back up and running. Not perfect, but once I reset all my links there was no perceptible loss of relevant data. See; there IS some life left in regular computers!
Glen Eldridge
Pointe Claire QC

apple.id.apple.com
theres a link for reset password and find apple id
Peace, Clyde

SSH local database username and password not working

I have a weird issue. I recently setup an ASA 5510 and had SSH working. To make it easier on my VPN users I then decided I wanted to setup a Windows 2008 Network Policy Server for RADIUS authentication. Ever since I added the RADIUS part to aaa authentication, when I use SSH to connect to the ASA it will not take the local user name and password I have setup. I can however get in using a Domain user name and password. Below is the SSH and AAA configuration. Am I missing something here? The username and password in the ASA is not on the domain and it's like the ASA is not even trying LOCAL when it tries to authenticate. I want it to use the local username and password if possible. I'm kind of new to ASA's..
On another note, I have never been able to SSH in on the internal interface. I always get a "The remote system refused the connection" error message. I can only use the outside interface.
Site-ASA# sh run | in ssh
aaa authentication ssh console SERVER_RADIUS LOCAL
ssh 0.0.0.0 0.0.0.0 outside
ssh 0.0.0.0 0.0.0.0 inside
ssh timeout 60
ssh version 2
Site-ASA# sh run | in aaa
aaa-server SERVER_RADIUS protocol radius
aaa-server SERVER_RADIUS (inside) host 10.0.0.6
aaa authentication ssh console SERVER_RADIUS LOCAL
aaa authentication http console SERVER_RADIUS LOCAL
Site-ASA#
If there are any other config that would help I would be more than happy to display them
Thanks!

Thanks for the reply. I was just coming in to update this because you are exactly correct. For some reason I kept thinking that if the authentication failed via RADIUS it would use local which is not the case.
Problem (or no problem) resolved.

I reset a Linksys extender, when I try to navigate Safari using The Linksys network, a Box askin for username And password pops out. What is this about?

I reset a Linksys extender, when I try to navigate Safari using The Linksys network, a Box askin for username And password pops out. What is this about?

Ask Linksys. If you reset the extender it presumably lost the username and password it was supposed to service. I'd just supply the name and password and move on.

Photocast username and password reset

My son created a photocast from his sub-account with a username and password. However, I getting a error message when I subscribe to the photocast, invalid name or password. Is there a way for him to check and reset the password on the album?

If you have to get connection to the server directly you ca do this:
For Linux/Unix
ORACLE_SID=database_sid
export ORACLE_SID
sqlplus /nolog
conn / as sysdba
alter user <user_name> identified by <password>;
For Windows
SET ORACLE_SID=database_sid
sqlplus /nolog
conn / as sysdba
alter user <user_name> identified by <password>;
Joel Pérez

Unable to set parental controls on itunes b/c my username and password are not correct. How do I reset them? There is no prompt to give any clues what they are.

unable to set parental controls on Itunes b/c my user name and password got rejected. How do I reset them or figure out my username and password?

This is a user to user support forum. We are all iphone users just like you.
You are not addressing Apple here at all.
This is an odd way to ask your fellow iphone users for help. Berating oterh users will not help you.
"it's too fragile"
No it is not. i have never damaged one, nor has anyone I know.
" U loose data when Ur phone is locked"
No you don't. Why do you think this?
"and there is no customer support!!! "
Wrong yet again. Apple has an 800 number and they have many retail stores and they have support articles that you can access using the search bar. Or you can contact them throgh express lane online
"but I will go back with Blackberry "
Please do.
Good ridance

Reseting SSH username and password

Similar Messages

Maybe you are looking for