Resetting E61 without lock code

hi
i desperatelz need to reset mz E61 to its factory defaults....since it takes around 45 seconds now to send an sms :/
i tried the restore to factory default option but my phone requires me to type in a code, which i cant remember, is there another way to reset the phone ?
thanks

Hey,I dont think resetting to default factory setting wont let yr phone to send SMS faster.For this,go to the support section of this site,choose yr phone and download SMS accelator.
For factory settings' default lock code is:12345.
But if y previously set a lock code and now cant remember that,that is another story.
Sw upgrade is another factor.Y can upgrade phone's SW by NSC.

Similar Messages

I forgot my restriction code on my iPod 4th Gen, and I dont have the same computer to do a reset. I have a new computer. How do I reset it without this code?

I am selling my iPod touch, but I forgot the Restriction Code so I can't reset it and I have a new computer, so all of my Apple stuff isn't there anyway. that is one of the main reason I wanted to sell my iPod because when I got a new computer I lost everything. But now I cant reset it without this code and I don't know what to do. Is there a way I can reset it without the code on my new computer?

http://support.apple.com/kb/HT1212

IPad puk code and VPN. Resetting sim without puk code

I have locked my sim on my iPad mini. Need my puk code but it's 7 hours drive away from me. My VPN settings are all erased due to I did a reset of my settings. Does anyone know how to reset without puk code.? Let me know would be appreciated

Hey Mattyb28nz,
Thanks for the question. If I understand correctly, you need to enter the PUK code and do not have it. I would recommend that you read this article, it may be able to help the issue.
iOS: Understanding the SIM PIN - Apple Support
Personal Unlocking Key (PUK)
If you enter the PIN incorrectly three times, you may need to enter a Personal Unlocking Key (PUK) to enable your SIM card again. Refer to the SIM card documentation or contact your carrier.
Note: Entering an incorrect PUK code too many times will result in the SIM becoming permanently locked. If this occurs, you will need to contact your carrier for a replacement SIM card.
Thanks for using Apple Support Communities.
Have a great day,
Mario

Resetting Kin Screen lock code

I lost my Kin for a few days then found it, but I can't remember what the screen lock code is. I do not want tolose my data is there a way to reset it?

Oh bummer - I was hoping not to do that. Oh well - that's what I get for teaching him to play yatzee on my ipod!! Thanks for the help!

Reset Nokia 6300 lock code

i forgot my nokia 6300 lock code.
I even dont know how to get my phone IMEI Code
pls help me to break the code

The default code is 12345, unless you changed this and have forgotten it. This means you will have to visit a local Nokia Care point to get your phone unlocked.
You can get your IMEI code by checking the abck of yoru phone under the battery and on the box the phone came in.
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Reset volume lock code

How can you reset your volume lock code?

Restoring the iPod will delete everything on it and no, it isn't backed up or saved anywhere when you do this.
But you already have a back up of your iPod content in your iTunes library don't you? It's easy enough to reload that after restoring the iPod.

Lock code after reset to factory settings

I have changed my lock code from default and I remember it. Since I had some software issues, I reset the phone (Nokia 5230) to factory settings by giving the lock code.
Today when I enter (after resetting) my personal lock code, the phone didn't accept it. I tryied several times and got a warning message. Will my phone become locked permanently if I enter the wrong lock code again? What should I do? Please help.
Solved!
Go to Solution.

You get locked out for increasing lengths of time before you can input another lock code upon repeated tries. Although it should not have changed, presumably you tried factory default of 12345 as one of your attempts? If all else fails a visit to Nokia Care facility with proof of purchase beckons.
Happy to have helped forum in a small way with a Support Ratio = 37.0

My nokia e63 switch on after lock code

I forgot my nokia E63 lock code, so whenever i switch on my device it is asking for the lock code. Can you help me how can i solve this problem (how can i reset my phone lock code?). I have updated...
Solved!
Go to Solution.

ONLY way to get the Security code reset is by visiting Nokia Care along with a proof of ownership (Bill / Invoice)

Nokia E63 lock code

I forgot my nokia E63 lock code, so whenever i switch on my device it is asking for the lock code.
Can you help me how can i solve this problem (how can i reset my phone lock code?).
I have updated my device using nokia software updater today i.e. on 20.12.2009.
Solved!
Go to Solution.

The standard code is 12345 but if you changed this code and you forgot, there is only one way to solve the problem. Bring it in to a Nokia Care Center.
http://europe.nokia.com/support/repair-and-recycle/repair
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Someone put a lock code on my new iPhone 4. I've made nine attempts. How do I just reset the whole phone without the code?

How do I reset the lock code without knowing the existing code?

Turn off phone. Plug the USB cable into the computer you first set the phone up with. Open iTunes. Plug the USB cable into the phone while holding down the home button. Choose restore as new on iTunes. All data will be cleared from the phone and it will be in the same condition as when you first bought it new. I just had the same problem and the only thing I could not retreive was the pictures that were stored on the phone. All my apps that I purchased could be restored. Email accounts will need to be set up again.

Lock Code request after hard reset

Hi,
So I did a hard reset and I knew that I'll lose the Ovi Store. What it's completely new for me is that now each time I'm starting the phone I am requested to input the lock code. I have given 12345 but a message saying "Code fail" is shown and afterwards the phone works normally.
1. Does anybody know why12345 is not working anymore?
2. Does anybody know how could I remove this request at startup?
3. Does anybody know why the phone does react if I am inputting an incorrect code only with a message "Code fail" - I would have expected a lock after multiple inputs but everything is OK.
4. Does anybody know how can I change this code? - without flashing it at Nokia Service Center (just too far from me). I'm curious if 10000 tries would bring something alhough I am not interested in such a test.

The default code is 12345 ! Do you have a pin lock on your sim card ? You can also request PUK code from supplier, if no good , you do need Nokia Care Point
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

E71 - reset lock code - please help

Hello everyone, i have a problem with my phone, my Nokia E-71. What happen was that i change my lock code back to 12345 and when the phone was lock and i had to put in the lock code to unlock it and i put in 12345 and it said Code Error. So i tried alot of other codes that might work and non of those work. i cannot make a call or anything. all i have on the screen is a blank white screen and i have to put in the Lock Code. is there a way i can reset it without having to send it back to the Nokia Company?.

No, you have to bring it in to a Nokia Care Point.
http://europe.nokia.com/support/repair-and-recycle/repair/care-points
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

I am trying to restore my iPhone 5 and my screen is no longer able to use and there is a lock code on the phone, how do i restore the phone without having to use the phonne?

how do i restore my iPhone with a lock code on the phone and the screen is completely unable to use?

Forgotten Passcode or device disabled after entering wrong passcode
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

Forgot lock code & Hard reset

Hi friends,
hope my post will find you all in healthy state. I have two queries and shall be very thankful to you if you guide me accordingly:
Q1: I want to restore factory settings of my N900, but unfortunately forgot the lock code. How lock code can be renewed?
Q2: I want to hard reset my N900, does any one has some simpler and straight forward process?
Thanks a lot in advance.
Nabeel ur Rehman
Nabeel ur Rehman

nabeelurrehman wrote:
Hi friends,
hope my post will find you all in healthy state. I have two queries and shall be very thankful to you if you guide me accordingly:
Q1: I want to restore factory settings of my N900, but unfortunately forgot the lock code. How lock code can be renewed?
Q2: I want to hard reset my N900, does any one has some simpler and straight forward process?
Thanks a lot in advance.
Nabeel ur Rehman
the ONLY way to reset the lock code if you forgot it is to flash your device with flasher3.5. you will have to flash both the os and the EMMC.
you can follow my directions HERE
since you wanted to reset your device and start over, this will make your device just as if you took it out of the box for the first time.

HT204053 My iphone is now locked at activation screen.My old Iphone purchased from Japan to Vietnam nam.toi reset iphone without knowing the old icloud account and I can not contact the previous owner to do now iphone.

My iphone is now locked at activation screen.My old Iphone purchased from Japan to Vietnam nam.toi reset iphone without knowing the old icloud account and I can not contact the previous owner to do now iphone.

The phone is useless unless you can contact the previous owner. There is nothing anyone can do to help. If you are able to contact, the following contains instructions on what they need to do: iCloud: Activation Lock

Resetting E61 without lock code

Similar Messages

Maybe you are looking for