Resetting SMC in Mac Pro-Early 2008

I have a problem, my Mac Pro is rebooting several times per day and I have reset the PRAM but understand that the SMC may need to be reset as well. I'm not sure how to do this. I am using OS 10.6.8. Can you plkease advise. Thank you.

Here's how:
http://support.apple.com/kb/HT3964

Similar Messages

Mac Pro (Early 2008) shuts down unexpectedly

I have a recurring problem with my Mac Pro (Early 2008). I put the computer to sleep; then, when I tap a few keys on the keyboard to wake it up, I hear the start-up sound and it boots up as if it were shut down.
This is particularly strange, because I do not have to use the "power" button on the tower to turn it on. When I tap the keys on the keyboard, as if to wake it from sleep, it makes the start-up sound and boots. I am guessing that somehow it is shutting off when I first try to wake it from sleep, and then must re-boot. But this is odd behavior that I've never seen from any Mac, and I've been using them for almost 20 years.
Any ideas? I'm going to call Apple Support but I always dread those long wait times and often fruitless conversations. I did not migrate information from my previous system; I took the time to manually migrate my files and reinstalled all apps from DVD specifically to avoid problems like this. Very frustrating.

I've noticed the same problem for one day with my new MP 2.8 dualquad, got a reboot after every sleep.
This solved the issue for me:
• Reset the PRAM (Boot the machine and hold ALTCOMMAND+PR for 3 startup gongs)
• Reset the SMC -> http://docs.info.apple.com/article.html?artnum=304123-en
Good luck

Mac Pro (early 2008) No chime, pixelated white apple screen

My Mac Pro (early 2008) stopped working this morning. It was working fine yesterday, but did not start today.
i Press the power button, and there is no chime. The fan whirls around and the cd disc drive makes a noise. The startup screen shows up with Pixelated black bars across the whole screen.
this his stays onscreen, freezes for a few minutes, then restarts And continues the cycle of freezing and restarting.
iI've tried to reset the smc and pram and that hasn't done anything.
i've cleaned the inside of the computer, checked the RAM and graphics card, they seem to be in good working order.
does anyone know what's wrong with it?

Hi BDAqua
i tried safe boot. The white apple screen still comes up pixelated but with a grey loading bar at the bottom. Once the bar has loaded fully, nothing happens. it stays frozen on that screen until I have to force it to shutdown by pressing and holding the power button on the front of the tower.
i Tried holding the alt key. It brings up the devices, the screen is still pixelated. Pressing either one of the disk drives, didn't do anything new Unfortunately.
https://mobile.twitter.com/SundeepToor/status/559966340883415040/photos
hopefully you can see what my screen looks like in the link.

Loud fan noise on mountain lion, Mac Pro early 2008

Hi there,
I've recently installed mountain lion 10.8.5 lon my Mac Pro , early 2008, 2,8 GHz, 24 gb ram, 2x ATI Radeon 2800 XT.
To give it a clean shot i clean installed it on a sep. Partition, no upgrade from my previous Snow Leopard.
The Machine usually works quiet, i've measured via Isat Menu:
exhaust fan: 681 rpm
HD/expansion: 1100 rpm
After running Mointain Lion, latest update version, i get a much louder fan noise than in snow leopard:
exhaust fan: 845-950 rpm
HD/expansion: 1500 - 1800 rpm
The activity monitor shows no significant CPU usage, only the kernal has over 90 threads constantly running.
I've heard that this is a known issue but it's never been resolved. SMC and PRAM reset did not work at all.
when i go back to snow leopard everything gets back to normal. Yosemite is even harder on fan noise than mountain lion
so i've rolled back to mountain lion.
Any idea ?
dezzo

no one here with the same problem on an early 2008 Mac Pro ?

Mac Pro Early 2008 not booting

Hey guys!
I walked into a problem with a Mac Pro early 2008 model.
I got this Mac Pro from somebody since it wasn't working anymore. I was told there could be a graphic card (Nvidia) issue which I think should at least be correct but I am also having trouble with loading EFI. The following things happen:
When I turn on the mac using a DVI to VGA adapter i have no screen at all. (I don't have any other options atm)
There is no HD inserted.
PRAM and SMC reset won't do anything, i'm not even sure it reads keyboard commands.
The fans all work even the one on the GPU.
Front LED just burns steady.
No lights on my USB (non Apple) Keyboard turn on.
The lights of the mouse just flashes on start up.
RAM LEDS light up on startup.
Motherboard reset button doesn't make anything change.
When I Press the button for the diag LED's, the Trickle Power and the Good Power led come on, the GPU LED stays off. The EFI LED is off aswel.
No RAM errors show up. Tried switching RAM and disconnecting RAM and GPU.
No startup chime what so ever.
I figured there could be something wrong with the EFI firmware (or logic board is just broken). I am trying to restore the firmware with a firmware restoration cd, but I can't get the cd tray to open. I pressed the on button and kept pressing it for a long time. All it does is makes my status LED flash a couple of times real fast, but then it goes back to normal state. No cd tray is opening and its not flashing 3 times fast, 3 time slow, 3 times fast as it probely should be doing.
You guys have any idea what to try next or how to restore the firmware?
Thanks in advance.

there's a boot code to run with the older machines
Pike wrote this code
Using this code will get you around the efi/boot issue and move on to OS 10.10.02
Installing Yosemite just prior to entering the efi/boot, then restart twice.
You'll need to research Pike's code, but your 2006 to 2008 machines are long ways from trash.
I'm upgrading my 2006 to 8 cores, Yosemite and 32 gig of ram.
Long live these early Mac Pros
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&v ed=0CB8QFjAA&url=http%3A%2F%2Fforums.mac…
maybe your issue is not related

Mac Pro (Early 2008) erratic behavior

Hi,
I have a Mac Pro (Early 2008) 2.8GHz purchased new, about 2+ years ago. I use it mainly for graphics, video editing and photography as well as casual home use. Everything is up to date and routinely checked.
I have added RAM, hard drives and peripherals over time, and about a year ago had to replace the video card to a ATI Radeon 4870 HD after the original nVidia 8800GT card died. Part from that it has worked flawlessly.
Lately however, I am suffering from very serious issues, and I'm worried my logic board might be faulty.
There are three different issues which don't necessarily seem related, but all started much about the same period. They are all sporadic and can't be reproduced.
1. When turning the machine on, the fans blaze at full speed - and the computer will not boot, although the chiming sound plays. I will then need to force shutdown and try again; sometimes I will need to try more than once.
2. While working, the computer unexpectedly reboots itself. This happens instantaneously without any prior warning.
3. While working (I think it is related to watching videos) the computer seems to freeze - although it is just the display - sounds and activities keep running, but there is no control over the machine and I will then have to force shut down.
I have done all the standard tests, including the full Apple Hardware Test and memtest, and everything came out fine. I have reset the SMC, and so far the rebooting issue has not recurred.
I am currently clueless and frustrated from this unacceptable behavior, especially since it is no longer under warranty.
Any suggestions would be appreciated.
Thanks

I have this same problem with my 17" MBP - Early 2008.
I'm writing from Brazil, so I took my computer to Apple Brazil, they don't want to change the logic board, because they are saying that my computerdoesnt show some kind of code needed to send to Apple US to replace the part.
Does anyone know how I can contact Apple U.S. to make this claim?
Sincerely, Alexandre de Carvalho

Mac Pro Early 2008 - random reboots!

Hello!
I have a problem with my Mac Pro Early 2008...
Processor 2 x 2.8 GHz Quad-Core Intel Xeon
Memory 10 GB 800 MHz DDR2 FB-DIMM
Graphics NVIDIA GeForce 8800 GT 512 MB
Software OS X 10.8.4 (12E55)
...ther screen will break up into random blocky pattern (like the video card freezes) and the Mac will reboot, kernel panic basically...
...3 months ago i updated the RAM from 6gb to 10gb, but haven't done anything else to the **** thing.
...it's done it five times in the last two days now.
...here is my lates panic report...this happened 10 minutes ago.
...does this report make sense to anyone?
===================================
Interval Since Last Panic Report: 1997046 sec
Panics Since Last Report:          3
Anonymous UUID:                    E39A1BFB-D1E1-D614-7991-B49386694DC1
Wed Jul 24 16:56:33 2013
panic(cpu 1 caller 0xffffff801669e53b): "TLB invalidation IPI timeout: " "CPU(s) failed to respond to interrupts, unresponsive CPU bitmap: 0x4, NMIPI acks: orig: 0x0, now: 0x0"@/SourceCache/xnu/xnu-2050.24.15/osfmk/x86_64/pmap.c:2337
Backtrace (CPU 1), Frame : Return Address
0xffffff813feeb960 : 0xffffff801661d626
0xffffff813feeb9d0 : 0xffffff801669e53b
0xffffff813feeba50 : 0xffffff80166a3a3a
0xffffff813feebae0 : 0xffffff80166a53a6
0xffffff813feebb00 : 0xffffff8016664406
0xffffff813feebbf0 : 0xffffff801666706c
0xffffff813feebce0 : 0xffffff801666b0e0
0xffffff813feebd10 : 0xffffff8016665bdf
0xffffff813feebd40 : 0xffffff8016717554
0xffffff813feebd70 : 0xffffff80167197c3
0xffffff813feebdc0 : 0xffffff801691184f
0xffffff813feebdf0 : 0xffffff80169062e6
0xffffff813feebea0 : 0xffffff80166fa0af
0xffffff813feebed0 : 0xffffff80166f37a7
0xffffff813feebf30 : 0xffffff80166fa029
0xffffff813feebf50 : 0xffffff80169e16aa
0xffffff813feebfb0 : 0xffffff80166ce9c3
BSD process name corresponding to current thread: launchd
Mac OS version:
12E55
Kernel version:
Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
Kernel slide:     0x0000000016400000
Kernel text base: 0xffffff8016600000
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 14846309182590
last loaded kext at 3120916610267: com.apple.filesystems.smbfs    1.8.4 (addr 0xffffff7f98562000, size 229376)
last unloaded kext at 410364773343: com.apple.driver.StorageLynx    3.1.7 (addr 0xffffff7f9853e000, size 8192)
loaded kexts:
com.Logitech.Control Center.HID Driver    3.6.0
com.metakine.handsoff.driver    2.0.8
com.apple.filesystems.smbfs    1.8.4
com.apple.driver.Oxford_Semi    3.1.7
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.driver.AudioAUUC    1.60
com.apple.filesystems.autofs    3.0
com.apple.driver.AppleUpstreamUserClient    3.5.10
com.apple.driver.AppleHDA    2.3.7fc4
com.apple.driver.AppleMCCSControl    1.1.11
com.apple.iokit.CSRBluetoothHCIControllerUSBTransport    4.1.4f2
com.apple.GeForce    8.1.2
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.iokit.IOBluetoothSerialManager    4.1.4f2
com.apple.driver.AppleLPC    1.6.0
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AppleMCEDriver    1.1.9
com.apple.driver.ApplePolicyControl    3.4.5
com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
com.apple.iokit.SCSITaskUserClient    3.5.5
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.3.1
com.apple.driver.AppleIntel8254XEthernet    3.1.1b1
com.apple.driver.AppleUSBHub    5.5.5
com.apple.driver.AppleFWOHCI    4.9.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    34
com.apple.driver.AppleAHCIPort    2.5.2
com.apple.driver.AppleIntelPIIXATA    2.5.1
com.apple.driver.AppleUSBEHCI    5.5.0
com.apple.driver.AppleUSBUHCI    5.2.5
com.apple.driver.AppleEFINVRAM    1.7
com.apple.driver.AppleACPIButtons    1.7
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.7
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
com.apple.nke.applicationfirewall    4.0.39
com.apple.security.quarantine    2.1
com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.5
com.apple.iokit.IOFireWireSerialBusProtocolTransport    2.1.1
com.apple.iokit.IOFireWireSBP2    4.2.2
com.apple.kext.triggers    1.0
com.apple.driver.DspFuncLib    2.3.7fc4
com.apple.iokit.IOAudioFamily    1.8.9fc11
com.apple.kext.OSvKernDSPLib    1.6
com.apple.driver.AppleSMBusController    1.0.11d0
com.apple.nvidia.nv50hal    8.1.2
com.apple.NVDAResman    8.1.2
com.apple.iokit.IOSurface    86.0.4
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport    4.1.4f2
com.apple.iokit.IOSerialFamily    10.0.6
com.apple.driver.AppleHDAController    2.3.7fc4
com.apple.iokit.IOHDAFamily    2.3.7fc4
com.apple.iokit.IOFireWireIP    2.2.5
com.apple.driver.AppleGraphicsControl    3.4.5
com.apple.iokit.IONDRVSupport    2.3.7
com.apple.iokit.IOGraphicsFamily    2.3.7
com.apple.driver.AppleSMC    3.1.4d2
com.apple.driver.IOPlatformPluginLegacy    1.0.0
com.apple.driver.IOPlatformPluginFamily    5.3.0d51
com.apple.driver.AppleUSBHIDKeyboard    170.2
com.apple.driver.AppleHIDKeyboard    170.2
com.apple.driver.IOBluetoothHIDDriver    4.1.4f2
com.apple.iokit.IOBluetoothFamily    4.1.4f2
com.apple.iokit.IOUSBHIDDriver    5.2.5
com.apple.driver.AppleUSBMergeNub    5.5.5
com.apple.driver.AppleUSBComposite    5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.5
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOATAPIProtocolTransport    3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.5
com.apple.iokit.IOUSBUserClient    5.5.5
com.apple.iokit.IOFireWireFamily    4.5.5
com.apple.iokit.IONetworkingFamily    3.0
com.apple.iokit.IOAHCIFamily    2.3.1
com.apple.iokit.IOATAFamily    2.5.1
com.apple.iokit.IOUSBFamily    5.6.0
com.apple.iokit.IOHIDFamily    1.8.1
com.apple.driver.AppleEFIRuntime    1.7
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    220.3
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    345
com.apple.iokit.IOStorageFamily    1.8
com.apple.driver.AppleKeyStore    28.21
com.apple.driver.AppleACPIPlatform    1.7
com.apple.iokit.IOPCIFamily    2.7.3
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
System Profile:
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 10 GB, SMC 1.25f4
Graphics: NVIDIA GeForce 8800 GT, NVIDIA GeForce 8800 GT, PCIe, 512 MB
Memory Module: DIMM Riser B/DIMM 1, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x0D9B, 0x000000000000000000000000000000000000
Memory Module: DIMM Riser B/DIMM 2, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x0D9B, 0x000000000000000000000000000000000000
Memory Module: DIMM Riser A/DIMM 1, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x802C, 0x3138484632353637324A4438304545314434
Memory Module: DIMM Riser A/DIMM 2, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x802C, 0x3138484632353637324A4438304545314434
Memory Module: DIMM Riser A/DIMM 3, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 4, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Bluetooth: Version 4.1.4f2 12041, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet 1, Ethernet, en0
PCI Card: NVIDIA GeForce 8800 GT, sppci_displaycontroller, Slot-1
Serial ATA Device: ST3500630AS P, 500.11 GB
Parallel ATA Device: PIONEER DVD-RW DVR-112D
USB Device: hub_device, 0x0409 (NEC Corporation), 0x005a, 0xfd400000 / 2
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd410000 / 4
USB Device: USB Laser Mouse, 0x046d (Logitech Inc.), 0xc069, 0xfd413000 / 6
USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfd412000 / 5
USB Device: EIZO USB HID Monitor, 0x056d (Eizo), 0x0002, 0xfd430000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x5d200000 / 2
FireWire Device: built-in_hub, 800mbit_speed
FireWire Device: OEM ATA Device 00, G-TECH, 800mbit_speed
==============================

...and this is my report from yesterday when it last happened to me...
==============================
Tue Jul 23 22:05:20 2013
panic(cpu 5 caller 0xffffff80156b8655): Kernel trap at 0xffffff7f96aed154, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000010, CR3: 0x00000000238e8000, CR4: 0x0000000000000660
RAX: 0x0000000000000001, RBX: 0xffffff811be18000, RCX: 0xffffff802e224e98, RDX: 0xffffff813df6ba38
RSP: 0xffffff813df6bb60, RBP: 0xffffff813df6bb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff811be18000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f96aed154, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x5
Backtrace (CPU 5), Frame : Return Address
0xffffff813df6b800 : 0xffffff801561d626
0xffffff813df6b870 : 0xffffff80156b8655
0xffffff813df6ba40 : 0xffffff80156ce17d
0xffffff813df6ba60 : 0xffffff7f96aed154
0xffffff813df6bb60 : 0xffffff7f96ad6844
0xffffff813df6bbb0 : 0xffffff7f96ad679a
0xffffff813df6bbd0 : 0xffffff7f96ab228e
0xffffff813df6bc00 : 0xffffff7f95c913a0
0xffffff813df6bc40 : 0xffffff7f95c9130f
0xffffff813df6bc60 : 0xffffff7f95c9675c
0xffffff813df6bcf0 : 0xffffff7f95c8ee50
0xffffff813df6bd20 : 0xffffff7f95ce01cf
0xffffff813df6bd70 : 0xffffff8015a33efb
0xffffff813df6bdc0 : 0xffffff8015a65297
0xffffff813df6be30 : 0xffffff801569874f
0xffffff813df6be80 : 0xffffff8015620b3d
0xffffff813df6beb0 : 0xffffff8015610448
0xffffff813df6bf00 : 0xffffff801561961b
0xffffff813df6bf70 : 0xffffff80156a6536
0xffffff813df6bfb0 : 0xffffff80156ce9e3
      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f95c85000->0xffffff7f95cbcfff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f95c46000
         com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f95c dc000->0xffffff7f95f81fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f95c46000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f95cc8000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f95c85000
         com.apple.GeForce(8.1.2)[7EC545A4-4B57-32F1-8DC3-C31023AFBDCB]@0xffffff7f96aae0 00->0xffffff7f96b7bfff
            dependency: com.apple.NVDAResman(8.1.2)[96AE69DE-8A37-39D0-B2D3-D8446A6AA670]@0xffffff7f95c dc000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[6C8CFC18-75F0-3DEF-86C7-CEB2C1FD6BB1]@0xff ffff7f95cc8000
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f95c46000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[990D1A42-DF16-3AB9-ABC1-6A88AC142244]@0 xffffff7f95c85000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12E55
Kernel version:
Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
Kernel slide:     0x0000000015400000
Kernel text base: 0xffffff8015600000
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 43990035275
last loaded kext at 33162859687: com.apple.driver.AudioAUUC    1.60 (addr 0xffffff7f96d60000, size 32768)
loaded kexts:
com.Logitech.Control Center.HID Driver    3.6.0
com.metakine.handsoff.driver    2.0.8
com.apple.driver.AudioAUUC    1.60
com.apple.iokit.IOBluetoothSerialManager    4.1.4f2
com.apple.driver.AppleTyMCEDriver    1.0.2d2
com.apple.driver.AppleHDAHardwareConfigDriver    2.3.7fc4
com.apple.driver.AppleHDA    2.3.7fc4
com.apple.driver.AppleUpstreamUserClient    3.5.10
com.apple.driver.AppleMCCSControl    1.1.11
com.apple.filesystems.autofs    3.0
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.GeForce    8.1.2
com.apple.iokit.CSRBluetoothHCIControllerUSBTransport    4.1.4f2
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.ApplePolicyControl    3.4.5
com.apple.nvidia.NVDAStartup    8.1.2
com.apple.driver.AppleMCEDriver    1.1.9
com.apple.driver.AppleLPC    1.6.0
com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
com.apple.driver.CSRHIDTransitionDriver    4.1.4f2
com.apple.driver.AppleFireWireStorage    3.1.7
com.apple.driver.initioFWBridge    3.1.7
com.apple.driver.IOFireWireSerialBusProtocolSansPhysicalUnit    3.1.7
com.apple.driver.LSI_FW_500    3.1.7
com.apple.driver.Oxford_Semi    3.1.7
com.apple.driver.StorageLynx    3.1.7
com.apple.driver.PioneerSuperDrive    3.1.7
com.apple.iokit.SCSITaskUserClient    3.5.5
com.apple.driver.XsanFilter    404
com.apple.driver.AppleFileSystemDriver    3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    34
com.apple.iokit.IOAHCIBlockStorage    2.3.1
com.apple.driver.AppleUSBHub    5.5.5
com.apple.driver.AppleIntel8254XEthernet    3.1.1b1
com.apple.driver.AppleFWOHCI    4.9.6
com.apple.driver.AppleAHCIPort    2.5.2
com.apple.driver.AppleIntelPIIXATA    2.5.1
com.apple.driver.AppleUSBEHCI    5.5.0
com.apple.driver.AppleUSBUHCI    5.2.5
com.apple.driver.AppleEFINVRAM    1.7
com.apple.driver.AppleACPIButtons    1.7
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.7
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
com.apple.nke.applicationfirewall    4.0.39
com.apple.security.quarantine    2.1
com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
com.apple.iokit.IOSerialFamily    10.0.6
com.apple.driver.DspFuncLib    2.3.7fc4
com.apple.iokit.IOAudioFamily    1.8.9fc11
com.apple.kext.OSvKernDSPLib    1.6
com.apple.driver.AppleSMBusController    1.0.11d0
com.apple.kext.triggers    1.0
com.apple.nvidia.nv50hal    8.1.2
com.apple.NVDAResman    8.1.2
com.apple.iokit.IOSurface    86.0.4
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport    4.1.4f2
com.apple.driver.AppleHDAController    2.3.7fc4
com.apple.iokit.IOHDAFamily    2.3.7fc4
com.apple.driver.AppleGraphicsControl    3.4.5
com.apple.iokit.IONDRVSupport    2.3.7
com.apple.iokit.IOGraphicsFamily    2.3.7
com.apple.iokit.IOFireWireIP    2.2.5
com.apple.driver.AppleSMBusPCI    1.0.11d0
com.apple.driver.AppleSMC    3.1.4d2
com.apple.driver.IOPlatformPluginLegacy    1.0.0
com.apple.driver.IOPlatformPluginFamily    5.3.0d51
com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.5
com.apple.driver.AppleUSBHIDKeyboard    170.2
com.apple.driver.AppleHIDKeyboard    170.2
com.apple.driver.IOBluetoothHIDDriver    4.1.4f2
com.apple.iokit.IOBluetoothFamily    4.1.4f2
com.apple.iokit.IOUSBHIDDriver    5.2.5
com.apple.iokit.IOFireWireSerialBusProtocolTransport    2.1.1
com.apple.iokit.IOFireWireSBP2    4.2.2
com.apple.driver.AppleUSBMergeNub    5.5.5
com.apple.driver.AppleUSBComposite    5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.5
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOATAPIProtocolTransport    3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.5
com.apple.iokit.IONetworkingFamily    3.0
com.apple.iokit.IOUSBUserClient    5.5.5
com.apple.iokit.IOFireWireFamily    4.5.5
com.apple.iokit.IOAHCIFamily    2.3.1
com.apple.iokit.IOATAFamily    2.5.1
com.apple.iokit.IOUSBFamily    5.6.0
com.apple.iokit.IOHIDFamily    1.8.1
com.apple.driver.AppleEFIRuntime    1.7
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    220.3
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    345
com.apple.iokit.IOStorageFamily    1.8
com.apple.driver.AppleKeyStore    28.21
com.apple.driver.AppleACPIPlatform    1.7
com.apple.iokit.IOPCIFamily    2.7.3
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
==============================

Can't install montain lion, mavericks or yosemite on my mac pro early 2008 8core

I tried installing mountain lion mavericks and yosemite on my mac pro early 2008 I upgraded the video card to see if that was the problems and still the same the problem is that after installing even during install the mouse moves super slow and the keyboard won't work at all so I can't entern
any information this is with a clean install and even if I update lion it does the same everything works fine on lion 10.7.5 problems there does any one know what could be the issue here? I'm only running one monitor and its the 30 inch cinema display here are the specst of my machine excuse my grammar and spelling it was never my favorite subject
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.8 GHz
Number of Processors: 2
Total Number of Cores: 8
L2 Cache (per Processor): 12 MB
Memory: 8 GB
Bus Speed: 1.6 GHz
Boot ROM Version: MP31.006C.B05
SMC Version (system): 1.25f4
Serial Number (system): G881111VXYK
Hardware UUID: 714C0BE4-9A35-5C33-BF74-0F55F7C31B5F
AMD Radeon HD 6870:
Chipset Model: AMD Radeon HD 6870
Type: GPU
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 1024 MB
Vendor: ATI (0x1002)
Device ID: 0x6738
Revision ID: 0x0000
ROM Revision: 007-NETKAS-ORG
EFI Driver Version: 01.00.507
Displays:
Cinema HD:
Display Type: LCD
Resolution: 2560 x 1600
Pixel Depth: 32-Bit Color (ARGB8888)
Display Serial Number: CY03018WXMP
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
ECC: Enabled
DIMM Riser B/DIMM 1:
Size: 2 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x014F
Part Number: 0x5453324741504D41435038502D5420202020
Serial Number: 0x00031CFB
DIMM Riser B/DIMM 2:
Size: 2 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x014F
Part Number: 0x5453324741504D41435038502D5420202020
Serial Number: 0x00031CFB
DIMM Riser A/DIMM 1:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5335
Serial Number: 0x01431026
DIMM Riser A/DIMM 2:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5935
Serial Number: 0x57656411
DIMM Riser B/DIMM 3:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty
DIMM Riser B/DIMM 4:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
Manufacturer: Empty
Part Number: Empty
Serial Number: Empty
DIMM Riser A/DIMM 3:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5335
Serial Number: 0x01172313
DIMM Riser A/DIMM 4:
Size: 1 GB
Type: DDR2 FB-DIMM
Speed: 667 MHz
Status: OK
Manufacturer: 0x80AD
Part Number: 0x48594D5035313241373243503844332D5335
Serial Number: 0x01172714
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported
WDC WD5000AAKS-00A7B0:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: WDC WD5000AAKS-00A7B0
Revision: 01.03B01
Serial Number:     WD-WMASY0158891
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
HD:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 484.82 GB (484,820,348,928 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/HD
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk2s3
Content: Apple_Boot
WDC WD5000AAKS-00A7B0:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: WDC WD5000AAKS-00A7B0
Revision: 01.03B01
Serial Number:     WD-WMASY0158891
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
HD:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 484.82 GB (484,820,348,928 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/HD
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk2s3
Content: Apple_Boot
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported
HDS725050KLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: HDS725050KLA360
Revision: K2AOAB5A
Serial Number:       KRVN67ZBHBEEAH
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: MBR (Master Boot Record)
S.M.A.R.T. status: Verified
Volumes:
UNTITLED 1:
Capacity: 500.11 GB (500,107,860,992 bytes)
Available: 449.41 GB (449,412,988,928 bytes)
Writable: Yes
File System: MS-DOS FAT32
BSD Name: disk1s1
Mount Point: /Volumes/UNTITLED 1
Content: DOS_FAT_32
HDS725050KLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: HDS725050KLA360
Revision: K2AOAB5A
Serial Number:       KRVN67ZBHBEEAH
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: MBR (Master Boot Record)
S.M.A.R.T. status: Verified
Volumes:
UNTITLED 1:
Capacity: 500.11 GB (500,107,860,992 bytes)
Available: 449.41 GB (449,412,988,928 bytes)
Writable: Yes
File System: MS-DOS FAT32
BSD Name: disk1s1
Mount Point: /Volumes/UNTITLED 1
Content: DOS_FAT_32
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported
HDS725050KLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: HDS725050KLA360
Revision: K2AOAB5A
Serial Number:       KRVN67ZAK1RKSF
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
machd:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 372.42 GB (372,419,407,872 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk0s3
Content: Apple_Boot
HDS725050KLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: HDS725050KLA360
Revision: K2AOAB5A
Serial Number:       KRVN67ZAK1RKSF
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
machd:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 372.42 GB (372,419,407,872 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk0s3
Content: Apple_Boot
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported
Intel ESB2 AHCI:
Vendor: Intel
Product: ESB2 AHCI
Link Speed: 3 Gigabit
Description: AHCI Version 1.10 Supported

Try this:
clone your system and repair it with Disk Warrior instead
Or try a clean test system install on another drive
A must: SmcFanControl 2.2 - a mere 400 rpm extra to keep air cooling up
Try to run w/o externals. MyBook included.
Is that a 7200.11 1TB? they had a lot of issues.
Run AHT off your OEM DVD.
2008 had to have EFI and SMC updates to deal with freezes on wake from sleep, and like all models, high inrush current. Hopefully you have a UPS and is 1500VA unit.
When you do hard restart from power button, you almost certainly add more directory errors and to files requiring immediate attention to repair and rebuild the directory; and to scan and repair and delete cache and temp files and folders. A must. Invest in bootable backups SuperDuper along with Disk Warrior (or TechTool Pro 6, maybe Drive Genius 3 but I'd rate that #3).
TimeMachine has its own bad habits, especially with Green drives and some externals.
Try to rule out everything and then add back one at a time.
And it may just be time to replace the 8800, very common, a couple threads this week, and it is 3 yrs old. Might want ATI 5870 or 5770.

Black Screen for Install of Windows 7 on Mac Pro Early 2008

I have a mac pro early 2008 with lion 10.7.4 and boot camp 4.0.3 I think... anyways the problem I have is when I am in boot camp, and configure the HDD partition, then the machine reboots... when it reboots and starts up boot from the install DVD (legit retail copy) I just get a black screen on both monitors. No curser, nothing just a black screen, same as I get when the machine is off! the little white LED lights are on and nothing...
I can hear the DVD spinning up and down a few times then that just stops too...
I have tried resetting the PRAM, pulling the power and watch battery inside for a few minutes, I tried the "fix" that is online for the imac problem with the answerfile and got no different resutls with anything, still the same probelm.
I have the OEM ATI Radeon video card 512MB.
* as a side note, I was never able to download the windows support drivers prior to trying the install... I tried and tried for the last two days so this time I "unchekced" that box and just went for the install...
Any help will be greatly appriciated, thank you :-)
Mike

Hey Hatter, I know this is a little old but I've just picked up this thread and I wonder if you can help. I get the same issue as:
JRASupport
Jun 28, 2012 1:56 PM
I have a mac pro early 2008 with lion 10.7.4 and boot camp 4.0.3 I think... anyways the problem I have is when I am in boot camp, and configure the HDD partition, then the machine reboots... when it reboots and starts up boot from the install DVD (legit retail copy) I just get a black screen on both monitors. No curser, nothing just a black screen, same as I get when the machine is off! the little white LED lights are on and nothing...
I get that dreaded black screen following partioning of my drive on the Windows 7 install on Mavericks on a Macbook Pro late-2008 (MBP5,1) but I'm at a loss to work out where the solution lies in the thread! ;-(
To date I've spent about 5 days going back and forth trying all sorts of combinations, including the obvious:
- removing bootcamp 5 and reverting to 4
- installing the imac drivers
A HUGE thanks if you can offer any help as I'm at the end of my tether...!
Adam
BTW I'm working off USB with 32 bit Windows 7 ISO

Hello. My mac pro early 2008 restarts after sleep mode and it works slower. I tested it with apple hardwear test and it seems to be ok. Thank you.

Hello. My mac pro early 2008 restarts after sleep mode and it works slower. I tested it with apple hardwear test and it seems to be ok. Thank you.

Try this:
clone your system and repair it with Disk Warrior instead
Or try a clean test system install on another drive
A must: SmcFanControl 2.2 - a mere 400 rpm extra to keep air cooling up
Try to run w/o externals. MyBook included.
Is that a 7200.11 1TB? they had a lot of issues.
Run AHT off your OEM DVD.
2008 had to have EFI and SMC updates to deal with freezes on wake from sleep, and like all models, high inrush current. Hopefully you have a UPS and is 1500VA unit.
When you do hard restart from power button, you almost certainly add more directory errors and to files requiring immediate attention to repair and rebuild the directory; and to scan and repair and delete cache and temp files and folders. A must. Invest in bootable backups SuperDuper along with Disk Warrior (or TechTool Pro 6, maybe Drive Genius 3 but I'd rate that #3).
TimeMachine has its own bad habits, especially with Green drives and some externals.
Try to rule out everything and then add back one at a time.
And it may just be time to replace the 8800, very common, a couple threads this week, and it is 3 yrs old. Might want ATI 5870 or 5770.

Mac Pro Early 2008 Crash on Boot Up

I have a Mac Pro early 2008 running OSX 10.8.5, and yesterday morning for seemingly no reason I had a screen corruption and freeze up, a kernel panic and then it rebooted itself. I have tried all of the memory( no flashing LED over power switch), cleared and reset all of the PRAM via keyboard and motherboard etc etc and everytime I reboot it crashes at the same point with a screen corruption and reboot. When I tried to boot in safe mode it the bar got 50% of the way across and it rebooted. I booted in verbose mode and single user mode and on both the last entry related to 'Ambrosiaaudiosupport' (as best I can remember) before it rebooted itself again. I sent the Kernel Panic to Apple but as I cannot get back into the OS I cannot obtain another.
Is there a solution to this please, and if so what do I need to do to rectify it
Many thanks in advance
Alan

If you can't boot in the usual way, try a safe boot. During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. If you have more than one user account, you must be logged in as an administrator to carry out these instructions. Safe mode is slower than normal, and some things won’t work at all. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the startup volume is on a software RAID, you can’t boot in safe mode. If you're able to boot, launch the Console application in any of the following ways: ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. ☞ Open LaunchPad. Click Utilities, then Console in the icon grid. Select the most recent panic log under the heading System Diagnostic Reports on the left. If you don't see that heading, select View ▹ Show Log List from the menu bar. Post the entire contents of the panic report — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Mac Pro (Early 2008) freezes, reboots to recovery system, trouble locating startup disk

I have two issues which may or may not be related with my Mac Pro. First, off and on for several months is has been frozen when waking from sleep. I can hit a key and see my desktop with the windows I left open, but I get the spinning beach ball and the time is typically several hours behind. The only way I can get it to start is to restart from the power button. This typically happens overnight when my computer has been asleep for a long time. Sometimes I hear the fan run while the computer is asleep and I don't know if that is related. I've tried switching from Firefox to Chrome to see if that was the problem since I typically have a few tabs open on Firefox when it freezes, but that does not solve the problem. The next step I plan to try is to get a can of compressed air and clean the fan and check if the video card air intake might be clogged, based on information I have read in various forums. Does anyone have other suggestions for things to try to eliminate the freezing? Another suggestion I read was to get a new logic board battery installed but I hate to lug this thing into an Apple store unless I really have to. Most of the time I'm comfortable fixing things on my own.
The second issue is that when I reboot after shutting down the computer with the power button, it does not always load the startup disk. Sometimes I get the recovery system instead, and if I try disk repair, restore from backup, or the startup disk option from the apple menu, it cannot locate the startup disk. Usually after a few tries, I can restart it and get my desktop, but I'm not sure how long that will work. I hoped that resetting the NVRAM would take care of this but it has not fixed the issue. When I do disk repair, it says the drive is fine. I've also used idefrag to clean up the drive. I'm thinking my hard drive might be about to die and I should just get a new one, but I don't want to spend the money if that is not the issue. I have 83 GB free on the drive so space should not be an issue.
Any suggestions on fixing either or both of these issue would be very much welcome! I need to make this computer last at least a couple more years.
Specs:
Mac Pro early 2008
Processor 2 x 2.8 GHz Quad-Core Intel Xeon
Memory 8 GB 800 MHz DDR2 FB-DIMM
Graphics NVIDIA GeForce 8800 GT 512 MB
Software OS X 10.8.5 (12F37)

Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|n Cause: -' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.

Maximum Size of Hard Drive in Mac Pro (Early 2008)

What is the Maximum size of Hard Drive that I can install in drive bay 3 or 4?
Computer info below:
Model Name: Mac Pro (Early 2008)
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.8 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per processor): 12 MB
Memory: 14 GB
Bus Speed: 1.6 GHz
Boot ROM Version: MP31.006C.B05
SMC Version (system): 1.25f4
Hardware UUID: FF121465-84A1-52F2-A94A-58A60A20F4AF

WE don't know, all there are today are 2TB and those are fine. I think you could RAID 6 for 10TB and maybe then?
Serious, there are none. Do you really expect to hit some ceiling?
http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso

Mac Pro Early 2008 + boot camp!!! pliz help from Pros!

Hi guys,
I'm currently using a Mac pro Early 2008 Quad 2.8 with 4 Gb of RAM. I also have 4 HDDs ( 2 of them are 1Tb( Western Digital Black and Green series), 1 is 320Gb-original comes with MP and one 250 Gb Western Digital caviar). All of my HDDs are internal. Recently, my superdrive failed on me. Therefore, i have to replace it using a Samsung OEM DVD optical drive ( TSSTcorp CDDVDW SH-S203D ) which was connected via the extra SATA port on my MP logic board. The optical drive was recognized fine by my MP.
Recently, as I used to work on both platforms ( Mac and PC) for audio mastering, I've decided to install windows 7 using bootcamp so that I can use Wavelab on my Mac for audio mastering. I had my 250Gbs SATA on HDD bay 4 formatted as a single volume for Bootcamp using Bootcamp Assistant. The process went fine until the system restarts for Windows installation. As I used Bootcamp before, i understood that freaking apple EFI wont read SATA (or external) optical drive to install Windows via Bootcamp, therefore I used RefiT as bootloader ( this method always worked for me before on other macs). I also have windows 7 ultimate ligit DVD. However, I experienced this :
- when I restarted my MP without having refit installed , there was always a flashing Apple + a prohibition mark and Windows installation didnt start. I've tried to reboot, hold down OPTION key so that the Windows installation DVD is read by optical drive and then choose it, same thing happened.
- After trying Bootcamp traditional way of installation without success, I install RefiT into my OSX drive ( 320 GBs), have MP restarted twice, then i got Refit boot menu, chose the windows installtion DVD..... now REFIT shows me that having some problem with Legacy boot and can't start the DVD.
Anyone is having the same problem like me with the flashing Apple+ prohibition mark ? Please HELP me!!!! I've used Bootcamp and REFIT for ages on Mac and never had this happened. Bleh!
I'm using Mac OSX 10.6.3. And below is my system profile:
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.8 GHz
Boot ROM Version: MP31.006C.B05
SMC Version (system): 1.25f4
Disc Burning:
TSSTcorp CDDVDW SH-S203D:
Firmware Revision: SB00
Interconnect: ATAPI
Burn Support: Yes (Generic Drive Support)
Profile Path: None
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RAM, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO

hi all,
Finally I had my Mac pro Early 2008 Quad installed Windows XP SP3 on 2nd internal HDD.
Here's the update for anyone that is having the same problem as I had.
1st : you need to prepare some elements for a smooth installation
- Winclone for mac osx
- Windows XP image that was made from Winclone ( I had to download Winclone 1st, then ran to a friend of mine who had Windows already installed on his Mac using bootcamp and made an image of a version of Windows ( XP/vista/7) on his HDD via Winclone. The image will have file extension like this : xxxx.winclone ( xxxx is the name you choose)
- bootcamp 3.0 drivers for windows, just in case.
2nd : install Winclone on your Mac osx drive.
3rd: open bootcamp Assistant. prepare your drive for a Windows installation then quit it. However, somehow in my Mac Pro, the partition that BCA created wasn't mounted on my Finder, therefore I opened disk Utility and then reformat my BOOTCAMP drive to FAT32 or NTFS ( if you install NTFS-3G, disk utility will allow you).
4th: Open winclone. Now choose Restore. Then choose your Windows image that you made earlier and choose the Partition that you formatted for Windows and wait. It wont take long for the software to copy the image to your partition.
5th: now its time to restart your computer. hold down Option key so that you can choose the Windows Partition to boot.
6th: Windows will boot up and starting to scan for hardware changes again ( as the computer hardware ID and specs changed).
7th: if needed, use bootcamp 3.0 to install drivers for your Mac in windows.
8th: register your copy of Windows
Hope this help.by the way, you also want to force your Mac Pro to recognize all of your SATA HDDs and optical drive by force it to load up drivers in AHCI mode. There are lots of threads over Internet about how to do it. Perhaps InsanelyMac forum ( that's where i find it).
And finally good luck with guys who are having the same problems like me. It took me 3 weeks to find out how to do it.
Sorry admin for any violations ( I only want to help people cos I know its hard with guys who dont know ).
CHEERS!

I have a big problem whit my mac pro early 2008 can u help me please.

Hi my name is walter hernandez i have a big problem whit my mac pro early 2008
this is a message from my mac.
Interval Since Last Panic Report: 1151724 sec
Panics Since Last Report:          3
Anonymous UUID:                    ECF28484-9BA1-43C5-B7CF-70087794A780
Fri Aug 24 09:00:27 2012
panic(cpu 0 caller 0x2abf6a): Kernel trap at 0x00279ece, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0xff000014, CR3: 0x522e2000, CR4: 0x00000660
EAX: 0x0bccc43c, EBX: 0xff000000, ECX: 0x08eb8b7c, EDX: 0x0330c3e8
CR2: 0xff000014, EBP: 0x6115bde8, ESI: 0x001fb000, EDI: 0x00000000
EFL: 0x00010286, EIP: 0x00279ece, CS: 0x00000008, DS: 0x03350010
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x6115bbd8 : 0x21b837 (0x5dd7fc 0x6115bc0c 0x223ce1 0x0)
0x6115bc28 : 0x2abf6a (0x59e3d0 0x279ece 0xe 0x59e59a)
0x6115bd08 : 0x2a1a78 (0x6115bd20 0x1 0x6115bde8 0x279ece)
0x6115bd18 : 0x279ece (0xe 0x2c970048 0x61150010 0x10)
0x6115bde8 : 0x258575 (0xbccc43c 0x1fb000 0x0 0x1)
0x6115bf38 : 0x2ab83c (0x8c35ebc 0x709fb000 0x7fff 0x1)
0x6115bfc8 : 0x2a18da (0x85a04c4 0x0 0x10 0x85a04c4)
BSD process name corresponding to current thread: automount
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 1217906594287
unloaded kexts:
com.apple.driver.AppleFileSystemDriver          2.0 (addr 0xd71000, size 0x12288) - last unloaded 473939257675
loaded kexts:
com.Bella-USA.DVKeyboard.driver          3.2
at.obdev.nke.LittleSnitch          2.5.1
com.apple.filesystems.autofs          2.1.0 - last loaded 390587246978
com.apple.driver.IOBluetoothBNEPDriver          2.4.5f3
com.apple.driver.AppleHWSensor          1.9.3d0
com.apple.driver.AppleUpstreamUserClient          3.5.7
com.apple.driver.AppleMCCSControl          1.0.20
com.apple.driver.AppleHDA          2.0.5f14
com.apple.kext.ATIFramebuffer          6.3.6
com.apple.driver.AudioAUUC          1.57
com.apple.ATIRadeonX2000          6.3.6
com.apple.driver.AppleUSBDisplays          289
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.1.6
com.apple.driver.AppleIntelPenrynProfile          17
com.apple.driver.AppleMCEDriver          1.1.9
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0a1
com.apple.driver.AppleLPC          1.5.1
com.apple.iokit.SCSITaskUserClient          2.6.8
com.apple.driver.AppleRAID          4.0.6
com.apple.BootCache          31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.iokit.IOAHCIBlockStorage          1.6.4
com.apple.driver.AppleIntel8254XEthernet          2.1.3b1
com.apple.driver.AppleFWOHCI          4.7.3
com.apple.driver.AppleUSBHub          4.2.4
com.apple.driver.AppleAHCIPort          2.1.7
com.apple.driver.AppleIntelPIIXATA          2.5.1
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleUSBEHCI          4.2.4
com.apple.driver.AppleUSBUHCI          4.2.0
com.apple.driver.AppleACPIButtons          1.3.6
com.apple.driver.AppleRTC          1.3.1
com.apple.driver.AppleHPET          1.5
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.3.6
com.apple.driver.AppleAPIC          1.4
com.apple.driver.AppleIntelCPUPowerManagementClient          142.6.0
com.apple.security.sandbox          1
com.apple.security.quarantine          0
com.apple.nke.applicationfirewall          2.1.14
com.apple.driver.AppleIntelCPUPowerManagement          142.6.0
com.apple.driver.AppleProfileReadCounterAction          17
com.apple.driver.DspFuncLib          2.0.5f14
com.apple.driver.AppleProfileTimestampAction          10
com.apple.driver.AppleProfileThreadInfoAction          14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction          10
com.apple.driver.AppleProfileCallstackAction          20
com.apple.iokit.IONDRVSupport          2.2.1
com.apple.kext.ATI2600Controller          6.3.6
com.apple.kext.ATISupport          6.3.6
com.apple.iokit.IOFireWireIP          2.0.3
com.apple.iokit.IOSurface          74.2
com.apple.iokit.IOBluetoothSerialManager          2.4.5f3
com.apple.iokit.IOSerialFamily          10.0.3
com.apple.iokit.IOAudioFamily          1.8.3fc2
com.apple.kext.OSvKernDSPLib          1.3
com.apple.iokit.AppleProfileFamily          41
com.apple.driver.AppleSMC          3.1.0d5
com.apple.driver.IOPlatformPluginFamily          4.7.0a1
com.apple.driver.AppleHDAController          2.0.5f14
com.apple.iokit.IOGraphicsFamily          2.2.1
com.apple.iokit.IOHDAFamily          2.0.5f14
com.apple.driver.CSRUSBBluetoothHCIController          2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController          2.4.5f3
com.apple.iokit.IOBluetoothFamily          2.4.5f3
com.apple.driver.AppleUSBHIDMouse          162
com.apple.iokit.IOUSBHIDDriver          4.2.0
com.apple.driver.AppleHIDMouse          162
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.8
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.6
com.apple.iokit.IOCDStorageFamily          1.6.1
com.apple.driver.XsanFilter          402.1
com.apple.iokit.IOATAPIProtocolTransport          2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.8
com.apple.iokit.IONetworkingFamily          1.10
com.apple.iokit.IOFireWireFamily          4.2.6
com.apple.iokit.IOUSBUserClient          4.2.4
com.apple.iokit.IOAHCIFamily          2.0.6
com.apple.iokit.IOATAFamily          2.5.1
com.apple.iokit.IOUSBFamily          4.2.4
com.apple.driver.AppleEFIRuntime          1.4.0
com.apple.iokit.IOHIDFamily          1.6.6
com.apple.iokit.IOSMBusFamily          1.1
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          6
com.apple.driver.DiskImages          289.1
com.apple.iokit.IOStorageFamily          1.6.3
com.apple.driver.AppleACPIPlatform          1.3.6
com.apple.iokit.IOPCIFamily          2.6.5
com.apple.iokit.IOACPIFamily          1.3.0
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 3 GHz, 4 GB, SMC 1.25f4
Graphics: ATI Radeon HD 2600 XT, ATI Radeon HD 2600, PCIe, 256 MB
Memory Module: global_name
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 0 incoming serial ports
Network Service: Ethernet 2, Ethernet, en1
PCI Card: ATI Radeon HD 2600, sppci_displaycontroller, Slot-1
Serial ATA Device: ST3320820AS_P, 298.09 GB
Serial ATA Device: WDC WD5000AAKS-00A7B0, 465.76 GB
Serial ATA Device: WDC WD5000AAKS-00A7B0, 465.76 GB
Serial ATA Device: WDC WD5000AAKS-00D2B0, 465.76 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: Hub, 0x05ac (Apple Inc.), 0x911c, 0xfd400000 / 3
USB Device: Apple Cinema HD Display, 0x05ac (Apple Inc.), 0x921c, 0xfd420000 / 6
USB Device: Hub, 0x0424 (SMSC), 0x2503, 0xfd300000 / 2
USB Device: KEYBOARD, 0x4320, 0x0302, 0xfd330000 / 5
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0xfd310000 / 4
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8206, 0x5d200000 / 2
FireWire Device: built-in_hub, Up to 800 Mb/sec
FireWire Device: unknown_device, Unknown

That's a Kernal Panic. Look at this Apple Article: http://support.apple.com/kb/TS3742

Resetting SMC in Mac Pro-Early 2008

Similar Messages

Maybe you are looking for