Resetting the billing element indicator

Hi Experts
Some SD user checked by mistake the Billing element indicator on a WBS.
During the period closing and after the settlemen, CO noticed the mistake and reversed the settlement
There is no Billing plan on this WBS, and of course no revenues, but we still can't uncheck the indicator (grey)
Is there any better way than directly changing the PRPS table?
Regards
Matej

Hi,
Not sure but you can check this note. Might help you.
Note 535368 - WBS element: Billing element changeable in error
Regards,
Gokul

Similar Messages

Settling WBS with Billing element indicator

Hi Experts,
I'm trying to settling a Project that contains WBS with 'billing element' indicator marked and others not.
When I executed CJ88 to settle WBS to CO-PA, only settled wbs without 'billing element' indicator marked.
Could you indicate me why WBS with 'billing element' indicator marked doesn't settle to CO-PA, is there something special for those WBS ?
Thanks in advance,
José Luis
Edited by: José Luis Rodríguez on May 4, 2011 2:15 AM

Hi
1 .First step is we need to run T: code: CJB2 to generate settlement rule, if at all settlement profile is not assigned to your project profile and settlement rule is derived from settlement strategy define for the rule assigned in Project profile.,
2. Once you run step one, it will assign the settlement rule to the WBS with billing element as well it will assign result analysis key into the WBS with billing element (if att alll RA key is not defined in Project profile).
3. Now Run RA in tcode: KKA2 and save the results. exceute tcode CJIF to see the project results.
4. Now run the settlement in CJ88, you will see that the costs are settled to PSG. this you can verify in costelemnt report also.
thanks
regards
kishore

How to reset the Terminal Count indicator on the PXI-6608

Dear Community,
Is there any way to reset the terminal count indicator on the PXI-6608? When I Use Get Attribute.vi I get the correct value the first time, but unfortunately (unlike DAQmx) reading the value doesn't reset it...
I'd like to keep track of how many times it has rolled over. And I don't want to use another counter to do that because I'd like to keep them free for other things.
Thanks!
Cas
Solved!
Go to Solution.

Traditional daq does not have a means to reset the terminal count indicator, as far as I know. One thing you might be able to do is change the "output mode" to "toggle" and then read the "output state" to determine rollovers by determining when the output state has changed during your application.
I hope this helps!
gus....

How to reset the billing status of a delivery document

Hello Friends,
We have used transaction VL_COMPLETE to to set the status of couple of deliveries to C. We need to revert the status one delivery document to billing status to A( which was set by VL_COMPLETE by mistake)
Is there any program to do? Or the only option is to update in debugging mode in tables VBUK,VBUP,?
Kindly let me know if you have any inputs on this
Regards
Praveen

Hi.
Run the "RVDELSTA" program .
It will revert the changes from complete to the initial for Delivery.
Note: Only Delivery document updated with VL_COMPLETE can be reverted to initial status using the "RVDELSTA"
First check it in simulation mode and later remove it and execute it and it will revert the delivery .
Regards,
SRK

SAP-dump(while checking billing element)

Dear All ,
Whenever in a new created project . for a WBS , I am ticking billing element indicator , system is giving dump , what may be the reason ?
Regards

Please see if any of these notes are applicable in your case - 106610, 167426 and 119707. They're very old though. You will need to give more details about the dump to get help. Also, the first and the best thing to do is to check OSS.

Getting Billing Element in Purchase Order Using WBS element.

Hi,
What is the process and logic to get the billing element and the corresponding Sales order details using the WBS element or network of the account assignment category in the Purchase order line item.Please suggest the tables to be used to fetch the Sales order details using this procedure.
Thanks
Anand

Project PO can be generated in following methods.
1.When a Material attached to Activity in the Project, PR can be generated with A/C assignement Q. System wil copy the WBS element to which activity is assigned in the account assignment tab of PR. When PO is created with reference to PR, system wil automatically copy the WBS from the PR in to PO account assignment tab.
2. U can directly create PO with account assignment Q and assign WBS in account assignment tab.

0080000096 000010 Error no WBS billing element found while substituting WBS

Hi All,
I had created two WBS element for company code 11 and company code 12 and assigned to two respective sales orders.
I am doing Inter billing (T-code: VF01) from co. cd. 12 to co.cd. 11and getting error "0080000096 000010 Error no WBS billing element found while substituting WB"
Please give your input if you faced similar type of issue earlier.
Your support is highly appreciable.
Many Thanks
YG.

Yes ...Virendra...WBS element is the billing element and that is why we are done with assignment and deliver from sales order w.r.t PO.
Now at the time of Intercompany billing i am getting this error.....

Export Indicator in the Billing Invoice Header

How does the Export Indicator field gets populated in the billing invoice doc. (from what specific source)? I have an invoice where the accounting doc. didnu2019t generate ... it referenced 'foreign trade data incomplete', yet both are for DOMESTIC customers. In the header for the invoice the Export Indicator was marked w/ an u2018Xu2019. I'm trying to determine how that field could get populated since the invoice for domestic customer (where would it be pulling from)?

Siva
When you create a UDF at the Marketing document header, it creates it for all marketing document both AR and AP.
You could Open the AR document Press CTRLShiftB and uncheck VISIBLE on the user field.
The formatted search query would be
SELECT T0.CARDCODE, T0.CARDNAME FROM [DBO\].[OCRD\] T0 WHERE T0.CARDTYPE = 'C'
Suda

I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the defaul for opening a project?

I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the default for opening a project?

scottypet
For Premiere Elements 11 and 12, you cannot change its default project preset from NTSC AVCHD Full HD1080i30 or its PAL counterpart PAL AVCHD Full HD1080i25 to something else.
For each project, you can set the project preset manually if you do not want the program to take over setting the project preset based
on the properties of the first drag to the Timeline.
To set the project preset manually, open the project to the Expert workspace, go to File Menu/New/Project and Change Settings.
In the Change Settings area, change the project preset. Before you exit that area, be sure to have a check mark next to "Force Selected Project Setting on This Project" in the new project dialog.
Then you import your source media, using the appropriate Add Media choice.
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
If you want a version of Premiere Elements that uses the default project preset of NTSC DV Standard or its PAL counterpart PAL DV Standard, then you need to look to a version of Premiere Elements earlier than 11.
Please let me know if you have any further questions on this or need clarification.
Thank you.
ATR

HT201303 The Itunes store constantly asks me to Improve Apple ID Security by adding three secret questions but won't accept my valid password. I have tried to reset the password, update the billing info and it still won't let me make any purchases.

The Itunes store constantly asks me to Improve Apple ID Security by adding three secret questions but won't accept my valid password. I have tried to reset the password, update the billing info and it still won't let me make any purchases.

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

Higher-level billing element for the selling company code in your network

Hi ,
I am getting the error " No wbs element found while substituting wbs element 00074419.at the time of creation of invoice from OBD
I ahve refered note 672929 , solution is "Define a higher-level billing element for the selling company code in your network" but then I odnt ahev anything defined in the network.
Pls guide me how to go about it
Regards
Suvin.Sugathen

HI,
- Any of the WBSE which are hierarchically superior to your WBSE "74419" should have the relevant company code.
Check for any such superior WBSE in your structure & assign the company code, in question, to it. It should be a billing element also.
this is because, while billing system checks for the proper revenue receiver cost object in the particular company code.
regards

I just installed yosemite and now my Dutch language Photoshop elements is suddenly turned to a German version, how can I reset the language?

i just installed yosemite and now my Dutch language Photoshop elements is suddenly turned to a German version, how can I reset the language?

thanks,
in yosemite i installed englisg as a second preferred language, this worked!
Op 2 nov. 2014, om 22:55 heeft Barbara B. <[email protected]> het volgende geschreven:
i just installed yosemite and now my Dutch language Photoshop elements is suddenly turned to a German version, how can I reset the language?
created by Barbara B. <https://forums.adobe.com/people/Barbara+B.> in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/6892596#6892596>
Is this the mac app store version? A number of people are having this problem. This is what adobe recommended in the past for fixing the problem, but as far as I know it doesn't work in Yosemite:
Mac App Store version is German | Photoshop Elements <http://helpx.adobe.com/photoshop-elements/kb/mac-app-store-version-german.html>
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6892596#6892596
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email <mailto:[email protected]ware.com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 47>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0 <http://forums.adobe.com/thread/416458?tstart=0>.

RRB-How to get the activity description instead of WBS element in the bill

Dear All,
I am using RRB DIP profile to do my Resource related billing
RRB-How to get the activity description instead of WBS element in the billing
document.Now iam able to get the cost and the quantity used as line items but instead of getting the respective line items in the invoice iam still getting the WBS
element description for all the activities.Can some body guide me to overcome this problem.
Assured reward points for your suggestions and help.
Thanking you,
Best regards,
R.Srinivasan

Dear All,
Please can any body help me for the same.IT is urgent.I will award you points.
thankyou,
Best regards,
R.Srinivasan

I have recently sold my iphone and the new owner says he cannot use my phone without my apple id and password.i reset the phone to factory settings before i sent it.can he run up a bill using my id?cheers.

I have recently sold my iphone and the new owner says he needs my id and password to use it.i reset the phone to factory settings before i sold it but wanted to know if he could run up a bill even though i no longer have an account with my phone provider?

You did not follow the proper procedure when selling the phone before resetting it to factory settings. You must help the new owner deactivate the Activation Lock or else he will have the same issue over and over when he upgrades the software or sells it to someone else.
What to do before selling or giving away your iPhone, iPad, or iPod touch

I'm running Yosemite and my elements window is stuck all the way off the screen. I can't pull it back down. What can I do to reset the screen size?

How do I reset the window size? I'm running Yosemite OSX.
HELP!!

Stuck Windows in Photoshop Elements on a Mac | Barbara's Sort-of-Tech Blog

Resetting the billing element indicator

Similar Messages

Maybe you are looking for