Resetting the confirmation control key when saving the PO

Hi,
We have a requirement to remove the confirmation control key which is assigned to PO automatically at the time of saving the PO.
So is there any BADI or User Exit avaialable for resetting this key while saving the PO??
Thanks in Advance.

hai Nishad,
Please check out as given below path....
SPRO -> MM -> Purchasing -> Confirmations -> Set up confirmation control or tcode OMGZ
For more help please click on the given below link:
[http://www.sap-img.com/materials/explain-about-the-po-confirmation-control-key-in-detail.htm]
Regards
shelly Malik

Similar Messages

Confirmation control key check for inbound delivery creation

Hi,
Currently, in the Client's company, the process of receiving goods from purchase orders looks like that (SAP-wise):
- create a purchase order,
- receive goods using MIGO and automatically create an inbound delivery,
- pack the delivery and post goods receipt.
Recently, some patches have been installed, including one described by note 1602047 (which basically enforces checking confirmation control keys if goods receipt assignment and goods receipt relevance are activated for inbound deliveries). Note says that it only affects two-step stock transfer and creation of automatic inbound deliveries using SPED output but it seems it also affects other basic processes like PO receipt in MIGO.
Now, when using the old control key (that had MRP-Relevant and GR-Relevant fields checked), the system is unable to automatically create an inbound delivery after the goods receipt is posted with MIGO (with message VL148 - Not possible to create an inbound delivery). I learned that this is because the "GR Assignment" field must be checked in the confirmation control key so it's possible to automatically create aninbound delivery after receiving a purchase order in MIGO.
After changing the confirmation control key to have the missing field checked it's not possible anymore to receive goods from PO in MIGO as the PO requires shipping notification in order to be processed in MIGO thus requiring of manual creation of an inbound delivery.
Is there any way to skip this check so the process would remain the same (this model has been working fine for few years in the Client's system) and the inbound delievery would be created automatically after posting the receipt in MIGO?
Thanks in advance,
Piotr

Hi,
don't know if you found a solution, but we received the following message from SAP:
The advent of the new version requires some attention to the users. It
was necessary to avoid inconsistencies which in the past version the
system was susceptible.
Main Program SAPMM07M
Source code of MM07MLVS
sy-msgid VL sy-msgty E sy-msgno 148
I have checked the process and through debugged I could confirm the
following information SAP is providing to all similar incidents reportedfor us:
Error message VL 148 is issued if in the confirmation control key used
in the purchase order, the fields for MRP-relevance (T163G-KZDIS),
GR relevance (T163G-WEREL) and GR assignment indicator (T163G-WEZUO)
are not set.
The correction of note 1602047 was necessary to avoid inconsistencies
(table EKES) in the purchase order. Without having the GR assignment
(T163G-WEZUO) set, there is no unique reference created between the
purchase order history (table EKBE) and the inbound delivery
confirmation (table EKES) at goods receipt which leads to a problem if
several inbound deliveries exist for the same purchase order.
If you set T163G-WEZUO to 'X', this assures that, for an inbound
delivery, the confirmation record (EKES) belonging to this inbound
delivery (EKES-VBELN) is also accurately updated at goods receipt.
How to solve the issue?
Use a confirmation control key with the GR assignment indicator set
and then create the inbound delivery with VL31N. If you want to be able
to create the inbound delivery with reference to a certain line item in
the PO, use transaction VL34.
If you still want to use transaction MIGO, there is the following
workaround:
- Create a purchase order without any confirmation control key
- Create a goods receipt (GR) in transaction MIGO with reference to this PO and post the GR to a non-HU-managed storage location
- Create a transfer posting with MIGO using movement type 311 to
transfer the goods from the non-HU-managed storage location to the
HU-managed storage location.
As the transfer posting is an additional step for the user, the whole
process could be automated using a partner storage location
(T001l-PARLG) for the GR which then triggers (through a modification)
the BAPI 'BAPI_GOODSMVT_CREATE' to create the transfer posting without
user interaction.
I hope to have satisfied you on the reason why it is now happening and
also I believe you can explain to business that it is a new behavior
necessary done from SAP side to avoid worse situations, we are aware of
potential dissatisfaction it might cause. SAP Support is always
available to clarify any issue.
Sorry for not having a more positive answer.
I hope it helps!
Leentje

Purchase order confirmation control key issue

Hi,
We have an issue about vendor confirmation control key in transactions ME21N/ME22N
We have custom document types defined , ZNB - this is normal purchase order for external vendors and ZSTO - this is stock transfer orders between plants belonging to our corporation.
For ZNB we can introduce the confirmation control keys with no problem.
But when we try to introduce the confirmation control key for the ZSTO document type, the value is simply ignored and the field is reset to blank (NO error message)
My question what can be the reason for this , probably there is some customizing setup that creates this behaviour but I cannot find it.
Thanks
H.Z.

I put this succesive screen shots, first I select the confirmation key and after pressing enter the field is reset to blank .....
I was trying to find also user exista but with no success so far ....
Thanks
H.Z.

MIGO error 'Purchase Order does not contain a confirmation control key'

Hi,
while posting GR to a PO i am getting an error ' Purchase order XXXXXXXXX does not contain a confirmation control key'
it is true that i have not defined any confirmation control key in PO, Aknowled rerd checkbox is also not ticked
Still why this message coming, what setting would be bringing this message
Please clarity

Hi,
Until the installation of Note 589422 (with SP SAPKH46C43) you could due to a program error - create a delivery even though the purchase order did not contain any confirmation control key.
This is now prevented through error message M7394. The transfer of this check (Confirmation control key existing in the purchase order, see Note 589422) was necessary as otherwise you could post a purchase order as desired. (Refer to also Note 616944 -> SAPKH46C44)
589422 Several inbound deliveries can be created with MIGO :
"Implement the program correction.
With Transaction SE91 create message M7394 with the message text:
Purchase order & & does not contain a confirmation control key".
After you implemented this correction, when you want to create an
inbound delivery with Transaction MB01 or MIGO or with
BAPI_GOODSMVT_CREATE and if the purchase order does not contain a
confirmation control key the system displays error message M7394
"Purchase order & & does not contain a confirmation control key".
Hope this can explain the error you met.
Regards,
Mauro

Confirmation control key issue

Hi EXPERTS
I would like to know under what circumstances can the confirmation control key be included in the line item of a PO after GRN is done.
I am faced with a scenario where the GR of the line item of a PO is done and their is a confirmation control key attached to this line item But I donot find any inbound delivery details in the line item nor does it look that the inbound delivery is deleted
This line item now need to be reversed ( but the system doesnot allow stating that their are no suitable line items available
(I tried 102Mvt Thru' MIGO)
Could you pelase guide me regarding this situation and suggest ways and means for PO line item reversal
Thanks VC

HI,
Purchase Order Item Confirmations Tabstrips:
The confirmation control key controls the process subsequent to the creation of the PO.
E.g. For some important materials with long delivery times, you wish to receive advance information (via the shipping notification or inbound delivery) about the expected GR date so that you can include this information in the availability check.
The confirmation functionality is used to get better visibility & control over the goods receipts. Due to this requirement, when you work with confirmations, the system will not propose any quantity for MIGO unless any confirmations are entered in the PO. Also, MIGO will propose only such quantity for which the confirmation is entered.
In the purchase order, there is a field confirmation control key, following is its function extracted from text book.
1.The confirmation control key governs whether confirmations are expected for specific purchase order items and whether these confirmations are relevant for goods receipt or materials planning.
2. If a material document is to be created when the goods receipt posting for the inbound delivery is carried out, then the goods receipt assignment must be defined in the confirmation control.
How to set this field?
Configuration path:
SPRO -> MM -> Purchasing -> Confirmations -> Set up confirmation control or tcode OMGZ
Explain is there a necessity to fill the confirmation control, order acknowledgement & confirmation requirement. In STO normally we input the data for normal P.O.'s.only. If we input the above said data what happens if not what happens.
Confirmation gives the details of the shipping data, acknowledgement, delivery details etc......Overall view..
If it is used then Inbound delivery has to be created else GR is not possible...
VL31N--Inbound PO wrt PO/STO.(manual)..
If idoc /edi are configure, then everything will be automatic.
Confirmation Control is configured in SPRO -> Materials Management -> Purchasing -> Confirmations -> Setup Confirmation Control. The Confirmation Control should be assigned to the Vendor in Purchasing View (MK01/MK02). This it gets copied into the PO.
How to change the confirmation key in PO?
I have to change the confirmation key (in me23N) in the confirmation tab. It is working fine if there is no partial GR (entry in delivery schedule tab) against that line item. But if there is a GR entry against that line item its giving me a message 'confirmation key should not be changed'.
This is the standard of SAP....once GR is existing for the line then you can't change the confirmation key. To change, reverse the GR and change the key then Post GR again.
or
You can short close the PO line which you already have GR and create new line with remaining qty and enter new confirmation key.
pherasath

Confirmation Control Key Value in vendor master overwritten by Info Record?

Dear all
In the standard 3rd party processing, we will use S/O to trigger PR and we then convert PR to PO. And when PO is converted, Confirmation Control Key (CCK) Z01 maintained in Vendor master purchasing view will be adopted for all the items in the PO, and in the purchase infor Record for the combination of material & this vendor, we do not maintain any CCK value there.
However recently, the system behaves in such a way that the CCK value does not automatically show up in PO item anymore. And I have been thinking can it be the fact that the blank value of CCK in info record will overwrite the Z01 value in the CCK of vendor master? But if so, why all the past PO I have checked does not have CCK value maintained in info record but the CCK was able to appear automatically?
An interesting fact is that if I create the PO manually by enter Vendor with CCK value Z01, Org Data, account assignment S and Item category S (both for 3rd party processing), and then the material and hit ENTER, the CCK value Z01 will appear in PO Item level under tab: Confirmation.
However, once I enter the PLANT value in PO Overview, seem like the Empty value of CCK in info record will overwrite the existing Z01 value.
Please advise if it is how the info record CCK work to overwrite? Also, how do I get back to the stage where the info record CCK will not overwrite as I do not want to spend time to update all the info record CCK to have Z01.
Thanks

Dear Manohar Raju Kanchanapally
I do not understand why this OSS note SAP Note 909885 - ME21N: Confirmation control key not
from vendor mentions the following:
Symptom:
When you create a purchase order using Transaction ME21N, the confirmation control key from the vendor master is not used, although it is maintained.
Cause and Prerequisites:
The symptom occurs if no confirmation control key was maintained in the existing purchasing info record.
Solution:
Implement the attached correction instructions as a modification.
It is totally contrary with the General Rule that the most specific will always prevails, meaning if I do not maintain CCK value in the Info Record, it will overwrite the CCK value I maintain vendor master when I create PO using same vendor, material, purchaisng org and plant!
Please help!
Edited by: Daimos on Sep 17, 2009 1:22 PM
Edited by: Daimos on Sep 17, 2009 1:22 PM

Determine Confirmation Control Key for UB STO

Hi,
For NB PO's, the confirmation control key (CCK) can be determined by the vendor.
How can I determine the CCK for a UB STO when I am using a supplying plant instead vendor?
CD

Hi,
Normally the confirmation control key will be defaulted from the config maintained at sprommpurchasing--confirmations for NB or UB.
Regards,

Query: confirmation control key

Can anyone explain the importance of confirmation key in PO item?
I understand that in IMG, confirmation key can be configured so that it has a
sequence of confirmations. Please let me know its relevance in inbound delivery creation.
Thank you

The confirmation control key controls the the process subsequent to the creation of the PO.
E.g. For some important materials with long delivery times, you wish to receive advance information (via the shipping notification or inbound delivery) about the expected GR date so that you can include this information in the availability check.
To come to your question, if the inbound delivery is not allowed in the customizing of the Confirmation Control key, then it is not possible to create an inbound delivery for the PO, and you can only do the GR via MIGO or some other MM transaction. One impact of this is that between creation of the PO and the GR, you dont have any idea about where the material is, and when it will come.
I hope this clarifies,
Regards
Nikhilesh

Confirmation controll key

Hello
I have a problem concerning the confirmation controll key in Me21n. This is picked up from the vendor, and therfore causing me som trouble. We have a retail solution, were we have the same vendor for both the store and the warehouse (DC) the process of reciving goods are different, the stores uses MIGO and the warehouse inbound deliveries. The problem occurs in the warehouse, we can create the inbound delivery, but when posting GR for that we get a service, not a materialdocument. If i change the confirmation key to also include "GR with Reference to Vendor Confirmation" we get the mateiral document, but then it is not possible to do GR with MIGO. My problem is that i can see in a differnt system that it should be possible, but i have looked around for diifferences but cant find any, looked most in itemcategory and places like that. Does anyone have a tip where to look? I need to change the service into a materialdocument when doing GR for the inbound delivery.
In advance thanks
Regards
Ivar

Hi
If the store and Ware house are two different plants then you can have two different confimration control keys either by maintaining different confirmation control key at the PIR level or at the Vendor master - Plant level data.
This will ensure that the required confimration control key is defaulted based on the Plant that is procured for
Thanks & Regards
Kishore

Confirmation Control Key 0004

Hi Gurus,
When I am activating "Confirmation control key 0004" in the existing Scheduling Agreements(created with reference to contracts) system is giving the error "Confirmation control key 0004 not allowed" .
So kindly let me know will system accepts the confirmation if the schedules already partially delivered?
Regards,
A.S.K

Hi,
You cannot change the confirmation control key if partial delivery exists for that SA
Refer this Link
http://www.sap-img.com/materials/explain-about-the-po-confirmation-control-key-in-detail.htm
Edited by: redriver on Dec 13, 2011 12:34 PM

Confirmation control key not getting copied into PO created via ME59N

Hi,
I have maintained confirmation control key 003 in vendor master. Ticked automatic PO in vendor master as well as material master.Info record & source list (Fix vendor) are also maintained.
I have manully created PR & assigned source of supply. Now when I am trying to convert PR to PO via ME59N, confirmation control key is not getting copied from vendor master.
Note that I have not maintained CC key in info record. When I am creating PO manually wrt PR, CC key is getting copied from vendor master.
What could be the reason?
Regards,
Piyush

Hi Piyush,
Incase of Automatic PO creation /conversion of PR to PO automatically. Purchase info record is must along with the activation of CC Indicator (because PIR is a master record with the combination of vendor and for a certain material) to pull the CC key into the PO automatically.
Hence CC activation in PIR is required inorder to populate the Confirmation control key into the PO when it creates through Automatic PO with PR assignment using ME59N. Otherwise you have to specifiy manually incase of manual creation of PO.
Hope it clarifies,
Regards,
Sapsrin

Purchase order does not contain a confirmation control key

Hi expert
I have not set any confirmation control key in Purchasare order, still at the Migo, system is showing error at depot.
I have check the same thing with manufacturing plant, system dont show me any error.
Regard
Nabil

Hi,
I f the confirmation control key is maintained in PUR.info record is automatically will fetch into PO though you have not selected manually in PO. The CC maintained in vendor master or PIR can copy into PO. In your case please see whether inbound delivery is needed to perform GR? CC implies many types of confirmations like order acknowledgement, advanced shipping notification or confirmation of delivery dates. Please see specifically to the error. Try to know the type confirmation system needs to post GR. Thanking you.

Mass change for field Confirmation control Key in PO / SA

Dear All,
There is a need to do mass change in value for field Confirmation control Key in PO / SA. Some of them have PO history. If we have PO history system wont allow to change conf. ctrl key. Also since it is a production system we can not cancel previous po histories. This is in SAP 4.7 where we dont have mass change tcode for Scheduling agreements.
Can we maintain the values thru table entries. like using se16n maintain entries check box. This option is greyed out. can we activate that & do this requirement.
please suggest.

hi Greetings!
The confirmation control key can not be changed in the scheduling agreement if GR for item had already been posted. If the GRs can be canceled , it is possible to change the confirmation control in the SA item.
Version 4.7 do not support Mass change of scheduling agreements, hence you have to either create a SCAT or BDC to perform the task.
Gobinathan G

Confirmation Control Key

Hi
Do anyone know if it is possible to use "Confirmation Control Key" in SRM Contracts and Purchase Orders?
We are running Externat Scenarios in SRM7.0
We want the same functionality as the key in MM Contracts and PO to determines which confirmation categories are expected (e.g. order acknowledgment, shipping notification).
Thanks in advance
Br
Jesper

Hi Jesper,
what do you mean by External Scenarios in SRM ? is this standalone or Extended classic ?
If its extended classic then just do settings in ECC and in the PO you will get the confirmation control key as desired.
Best Regards,
Anil

Confirmation control key automatically defaulted not from supplier, nor PIR, nor user exit

Hi gurus
I have the confirmation control key automatically defaulting in the PO but it is not coming from the vendor master data, nor PIR nor from user exit.
Do you know from where it can be defaulted? I have noticed that if change the company code then it defaults but if change to another want then the field is blank, so it seems that there is something configured at company code level, but not sure what it could be
thanks so much
Ivan

Then you need to analyze thoroughly all the PIR'S and vendor master which are linked to scheduling agreement or contract where you are maintaining the control key.
And also any new functionality added in your PO functionality debug and check the same with ABAPER it will be easy way you can now from where exactly the confirmation control key is populating in PO.

Resetting the confirmation control key when saving the PO

Similar Messages

Maybe you are looking for