Resetting the HomeHub 3
Resetting the HH3 is normally the first thing to attempt when there is a connection speed issue.
There are a number of ways that this can be done.
1 Via a web browser logged into the Hub as administrator.
2 By using the push-button mounted on the rear of the hub
3 By disconnecting the power for a few seconds
4 By disconnecting the power for an extended time, say 30 mins
As far as the Hub or the exchange equipment is concerned is there any difference between these 4 methods?
Are there any advantages/disadvantages between them?
What is the generally accepted, best, method of resetting the Hub, and why?
Thanks
Alan
The least intrusive method of forcing a re-connection, is to disconnect the ADSL input for about 20 seconds, then re-connect it.
That forces a re-train which may result in a more favourable set of line frequencies, especially if its done in the morning, when noise levels are likely to be lower.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.
Similar Messages
-
I can't disable the BT-Fon service in the Homehub ...
Hello,
I previously had a homehub 2 router and I opted out of the BT-Fon services it it deactivated the service on my router, now recently due to a technical fault on my router I got set a Homehub 3, now that has the BT-Fon serivce on by default so my router is advertising BT-WiFi and BT-Fon which I DO NOT WANT, but when I check on the BT-Fon website it says that I'm already oppted out, I've tried opting out again but 2 days later my router is still saying the the service is active, I also rang up customer support on 0800 0223322 and asked for it to be deactivated but still no joy, this is driving me crazy, I don't want my router advertising BT Wi-Fi, can someone please help, I can't afford to buy a third party router.Opt back in and then immediately back out (yes I know this sounds daft)
Leave you hub on 24/7 and it should deactivate as said with in 48 hours.
Don't reset the hub after doing this, as it always puts BTWifi back on!
fwiw, you should see this on the hub event log as the hub gets the btwifi disabled update
10:40:51, 01 Feb. (33980.780000) CWMP: session completed successfully
10:40:45, 01 Feb. (33974.620000) CWMP: Set Parameter by TR069 Success
10:40:45, 01 Feb. (33974.620000) BT WiFi disabled via TR69
10:40:44, 01 Feb. (33974.070000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
-+-No longer a forum member-+- -
The Macbook, The HomeHub 4, and the Gremlin...
Good evening all,
I have an as yet unexplainible conundurum with my BT Homehub 4, and I'm really hopeing that some clever individual on this board can help me solve this quandry. I'll try to be as succinct as possible whilst including all of the neccesary detail.
The rise of the gremlin
So there I sat on an uneventful Wednesday night until disaster struck... I had found my connection to the wonderful fibre optic network had been severed and a little exclimation mark over my wi-fi wymbol had appeared.
Having looked into my network preferences, I received the following message:
"Wi-fi has the Self-assigned IP address 169.254.xxx.xx"
Having spent days of googling and researching this apparently Mac specific problem, I've tried eveything I can get my hands on on-line to try and rectify the issue. I've deleted all sorts of recommended .plist files, I've added customer locations via the drop down menu on the screen shot above, I've removed all existance of my home network from my laptop and rejoined... I've even reset the router to factory settings to no avail. Additionally, I assigned my Mac a static IP address and it did not solve my problem.
One minute Wi-Fi will be working with no problems. The next, I get the dreaded exclamation mark above my Wi-Fi icon in the top right hand corner of my laptop and the same old Self-assigned IP address message.
I can get the internet back on by forgetting the netowork and re-joining, and by running the computers network diagnostics which seems to get my reconnected.
What makes me think it is the router?
You're probably thinking, given the symptoms, that they're is a problem with my Macbook. I thought this too, so i've ruled it out due to the following:
The laptop connects (and keeps connected) fine to sevral other networks, and coffee shop Wi-Fi networks
My Macbook had a clean install about a week before the issues started
BUT... Only my laptop has these connectivity issues on the network. The plot thickens.
Despite all of the above, what I have noticed is that my connection issues seem to arise when the Smart Wi-Fi changes its frequency from 5Ghz to 2.4Ghz. I have never had this issue with the channel changes before, so it seems bizzare that they have started now.
So to conclude, I'm completely at a loss with what to do. I have tried:
Resetting the router to factory settings
A plethora of other suggestions I can find online to fix my problem, briefly outlined above
Extending the DCHP lease on the router to 21 days
From the above I can only see 3 ways to progress at this current point in time. These are:
Buy a new router and hope that solves the problems I'm having
Perform a clean install on my Macbook and hope that solves the issue
Switch off the 2.4Ghz frequency and see how I get on? I don't know what knock on effect this may have
I'm hoping you lovely people can help lengthen this list in ways I can progress.
Thanks for taking the time to read.
LukeDid you switch off smart wireless. http://bt.custhelp.com/app/answers/detail/a_id/44328/~/switching-smart-setup-on-and-off-on-the-bt-ho...
Did you try splitting the 2 networks. http://bt.custhelp.com/app/answers/detail/a_id/44798/related/1
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
This is the report I get after:
Interval Since Last Panic Report: 176544 sec
Panics Since Last Report: 3
Anonymous UUID: 8D526306-CA36-4C7E-8053-65BE0295A3F9
Sun Aug 7 14:15:19 2011
panic(cpu 2 caller 0xffffff7f809522bf): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xffffff80a041a000 0x0a5480a2, D0, P3/4
Backtrace (CPU 2), Frame : Return Address
0xffffff80a3a7b2b0 : 0xffffff8000220702
0xffffff80a3a7b330 : 0xffffff7f809522bf
0xffffff80a3a7b3c0 : 0xffffff7f80a423fc
0xffffff80a3a7b410 : 0xffffff7f80a424bc
0xffffff80a3a7b470 : 0xffffff7f80cec749
0xffffff80a3a7b5b0 : 0xffffff7f80a61519
0xffffff80a3a7b5e0 : 0xffffff7f8095bc4a
0xffffff80a3a7b690 : 0xffffff7f8095754c
0xffffff80a3a7b880 : 0xffffff7f80959151
0xffffff80a3a7b960 : 0xffffff7f817d6008
0xffffff80a3a7b9a0 : 0xffffff7f817e4e06
0xffffff80a3a7b9c0 : 0xffffff7f818006d4
0xffffff80a3a7ba00 : 0xffffff7f81800739
0xffffff80a3a7ba40 : 0xffffff7f817e8c51
0xffffff80a3a7ba90 : 0xffffff7f817a0753
0xffffff80a3a7bb10 : 0xffffff7f8179f1c4
0xffffff80a3a7bb40 : 0xffffff7f817a4bfd
0xffffff80a3a7bb70 : 0xffffff80006524ad
0xffffff80a3a7bbe0 : 0xffffff800065284c
0xffffff80a3a7bc40 : 0xffffff8000652ff0
0xffffff80a3a7bd80 : 0xffffff80002a3738
0xffffff80a3a7be80 : 0xffffff8000222ff6
0xffffff80a3a7beb0 : 0xffffff8000214829
0xffffff80a3a7bf10 : 0xffffff800021bb58
0xffffff80a3a7bf70 : 0xffffff80002ae380
0xffffff80a3a7bfb0 : 0xffffff80002d83a3
Kernel Extensions in backtrace:
com.apple.NVDAResman(7.0.2)[7E65ECA2-D3A1-35F8-B845-C975FB531E7E]@0xffffff7f808 f2000->0xffffff7f80bc8fff
dependency: com.apple.iokit.IOPCIFamily(2.6.5)[95ABB490-3AB5-3D5E-9C21-67089A9AE6A1]@0xffff ff7f8087e000
dependency: com.apple.iokit.IONDRVSupport(2.3)[E99C8907-946D-3F1A-A261-4C0F2D5D0451]@0xffff ff7f808e0000
dependency: com.apple.iokit.IOGraphicsFamily(2.3)[897EB322-FD55-36D7-A68E-9E9C34A74A84]@0xf fffff7f808a8000
com.apple.nvidia.nv50hal(7.0.2)[2E84958C-1EEC-316B-9F7A-68C368F83476]@0xffffff7 f80bc9000->0xffffff7f80eeafff
dependency: com.apple.NVDAResman(7.0.2)[7E65ECA2-D3A1-35F8-B845-C975FB531E7E]@0xffffff7f808 f2000
com.apple.GeForce(7.0.2)[18E50F21-1E7F-3FFE-B298-7CD7A11879F8]@0xffffff7f817870 00->0xffffff7f81843fff
dependency: com.apple.NVDAResman(7.0.2)[7E65ECA2-D3A1-35F8-B845-C975FB531E7E]@0xffffff7f808 f2000
dependency: com.apple.iokit.IONDRVSupport(2.3)[E99C8907-946D-3F1A-A261-4C0F2D5D0451]@0xffff ff7f808e0000
dependency: com.apple.iokit.IOPCIFamily(2.6.5)[95ABB490-3AB5-3D5E-9C21-67089A9AE6A1]@0xffff ff7f8087e000
dependency: com.apple.iokit.IOGraphicsFamily(2.3)[897EB322-FD55-36D7-A68E-9E9C34A74A84]@0xf fffff7f808a8000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11A511
Kernel version:
Darwin Kernel Version 11.0.0: Sat Jun 18 12:56:35 PDT 2011; root:xnu-1699.22.73~1/RELEASE_X86_64
Kernel UUID: 24CC17EB-30B0-3F6C-907F-1A9B2057AF78
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 89938146718489
last loaded kext at 89789498800310: com.apple.iokit.IOAVBFamily 1.0.0d22 (addr 0xffffff7f80791000, size 36864)
last unloaded kext at 87392699739594: com.apple.iokit.IOAVBFamily 1.0.0d22 (addr 0xffffff7f80791000, size 36864)
loaded kexts:
com.sophos.kext.sav 7.3.0
com.apple.filesystems.smbfs 1.7.0
com.apple.driver.AppleHWSensor 1.9.4d0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.1.1f11
com.apple.driver.AppleMikeyDriver 2.1.1f11
com.apple.driver.AGPM 100.12.40
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.24
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleIntelHDGraphics 7.0.2
com.apple.driver.AppleIntelHDGraphicsFB 7.0.2
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.0
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.AppleMuxControl 3.0.8
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0b2
com.apple.GeForce 7.0.2
com.apple.driver.AppleLPC 1.5.1
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUSBTCButtons 220.8
com.apple.driver.AppleUSBTCKeyboard 220.8
com.apple.driver.AppleUSBCardReader 3.0.0
com.apple.driver.AppleIRController 309
com.apple.iokit.SCSITaskUserClient 3.0.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 32
com.apple.driver.AppleUSBHub 4.4.0
com.apple.driver.AirPort.Brcm4331 500.20.6
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.iokit.IOAHCIBlockStorage 2.0.0
com.apple.driver.AppleFWOHCI 4.8.6
com.apple.iokit.AppleBCM5701Ethernet 3.0.6b9
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleAHCIPort 2.1.8
com.apple.driver.AppleUSBEHCI 4.4.0
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 166.0.0
com.apple.nke.applicationfirewall 3.0.30
com.apple.security.quarantine 1
com.apple.driver.AppleIntelCPUPowerManagement 166.0.0
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.iokit.IOBluetoothSerialManager 2.5f17
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.DspFuncLib 2.1.1f11
com.apple.iokit.IOFireWireIP 2.2.3
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOAudioFamily 1.8.3fc11
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.1.1f11
com.apple.iokit.IOHDAFamily 2.1.1f11
com.apple.driver.AppleGraphicsControl 3.0.8
com.apple.driver.AppleSMC 3.1.1d2
com.apple.driver.IOPlatformPluginFamily 4.7.0b2
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.nvidia.nv50hal 7.0.2
com.apple.NVDAResman 7.0.2
com.apple.iokit.IONDRVSupport 2.3
com.apple.iokit.IOGraphicsFamily 2.3
com.apple.kext.triggers 1.0
com.apple.driver.BroadcomUSBBluetoothHCIController 2.5f17
com.apple.driver.AppleUSBBluetoothHCIController 2.5f17
com.apple.iokit.IOBluetoothFamily 2.5f17
com.apple.driver.AppleUSBMultitouch 220.23
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.0
com.apple.iokit.IOUSBMassStorageClass 3.0.0
com.apple.iokit.IOUSBHIDDriver 4.4.0
com.apple.driver.AppleUSBMergeNub 4.4.0
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.iokit.IO80211Family 400.40
com.apple.iokit.IOUSBUserClient 4.4.0
com.apple.iokit.IOFireWireFamily 4.4.3
com.apple.iokit.IOAHCISerialATAPI 2.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.0
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.0
com.apple.iokit.IOUSBFamily 4.4.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 165
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 326
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i5, 2.4 GHz, 4 GB, SMC 1.58f15
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.100.98.75.6)
Bluetooth: Version 2.5.0f17, 2 service, 12 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST9320325ASG, 320.07 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 5
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 8
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 3Try resetting the System Management Controller
http://support.apple.com/kb/HT3964 -
Error while resetting the delta in ODS (BI 7.0)
Hi all,
I face a problem in delta resetting...need your help... Thanks..
I have an ODS-1 which has target cube1, cube2, cube3....One week back a new target has been added as ODS-2....All complete data from ODS1 has been piped into ODS 2..(Note.. ODS2 has many more inputs from other cubes/ODS too)
NO issues till now....
I found a data problem in ODS-1 which got loaded 15 days back..... I have removed all 15 requests from cube1, cube2 and cube3... Now I am trying to reset the delta in ODS1...
I am getting the following error....Infoprovide ODS2 still contains request... Delete this first....
Since ODS2 has many other data alongwith ODS1... If I try deleting request from ODS2,, I need to clean it totally and redo... I dont want to do this...
Is there any way to disconnect this delta link between ODS1 - ODS2..... So that I will reload the data in ODS1 and populate into all targets...
Let me know your suggestions.... Thanks!
Regards
Ayyappan.VIs there any way to disconnect this delta link between ODS1 - ODS2..... So that I will reload the data in ODS1 and populate into all targets...
I dont think you can disconnect the link. just delete the requests originating from ODS1 in ODS2 and you can leave all other requests intact that are from other dataproviders and do a reinit. -
I have a iPhone 5. In usage, it says i have 2.1 gigs used because of photos and camera. I have deleted all my photos via iPhoto and now reset the phone back to factory settings in order to try to solve this problem, to no avail. Both iTunes and the phone say that 2.1 gigs are being used, even though the phone now has nothing on it. What is going on?
Yeah it works fine over wifi the problem is when I try to use it over my 3G. It's really stressing me out now.
-
How Long will it take to reset the 16gb ipad with clear all data in it.
How Long will it take to reset the 16gb ipad with clear all data in it.
I have the same problem. I try to reset my ipad / iphone 3g using the reset and delete all content on general. It is almost 2 days now but my ipad / iphone 3g are not yet finish. Only apple logo / looping circle appears on the screen. What will i do? thanks... iOS 5.0.1
-
My Mcbook cant find the host. I get some conection because my Utorrent has some donwload activity, but when I attempt to open any page i just get a time out and ERR_NAME_NOT_RESOLVED. If i reset the SMC by removing the battery, google loads perfectly and it gives me search results without any problem. But when I click on any link, or attempt to enter a direct URL it gives me the error mentioned before.
I restarted the modem, changed the DNS, deactivate the firewall, conect the macbook via ethernet, change the IP, and nothing seems to work. This issue happened the first time i tried to conect to internet in a different country. Internet works fine in any other laptop or mobile device.
When using the assistant to run a diagnosis on the network, i get the first 4 items (wifi, wifi adjustments, network adjustments and internet provider) with a green light, and the other two (internet and server) with yelow lights (sometmes red light).
When i tried to connect the first time, i had a OS X 6.8 but i upgraded it to Maverick 10.9, since i had already donwnloaded it, and the result was the same.
anyone could help me please?We usually advice first to Reload web page(s) and bypass the cache in case of such problem and then do a check for extensions to see if any are causing the problem.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Other possible causes can be zooming a page or having increased the minimum font size.
*http://kb.mozillazine.org/Websites_look_wrong -
How do I reset the e-printer's web embedded server network password?
I have an HP Photosmart 7520 e-all in one. I use Windows 7. I could tried to set a password in the EWS network tab. I could not change the user name so it remains "admin". I set the passwork and it seemed ok. But when I tried to log on again, it would not let me in. How do I reset the network password?
I recommend that you run "Restore Network Defaults" from the front panel and then run the wireless setup wizard again. This will wipe out all your network settings.
SandyBob
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP
1-800-474-6836 -
How do I reset the furthest page read in iBooks from an HTML Widget?
Our training department just got a bunch of iPads and I'm writing some custom HTML widgets for iBooks for them for testing, in-class activities, etc.
On the last page I have a link to clear all the forms and return to the first page. Like this: <a href="ibooks:///#page(1)">Click here</a>
That all works fine but the next time the book is opened it auto-syncs to the FURTHEST page read (the last page with the test on it) instead of the LAST page read (the first page- from the link mentioned above).
Basically we want the link to reset the furthest page read to the first page of the book when they finish the test so that the next person to use the iPad goes to page one automatically.
Does anyone have an idea of how to do something like completely clear the iBook cache?
Much obliged!This was hand-coded HTML, CSS, jQuery/Javascript with a PHP file on our server that processes answers and emails them to our training director.
I use Brackets exclusively for coding.
Hope this helps you. -
The HP C4480 all in one series PRINTER that I got free with my i-Mac is printing TINY print despite that my computer is set at 13 font Helvetica. How to reset the printer to normal print?
Is the Paper Size: set to US Letter and Scale: set to 100%
Dennis -
How do i reset the password for cisco DMM 5.1 hardware machine
Dear All,
I have a cisco DMM 5.1 with some players installed on it, I can login to the dmm 5.1 via web browser but I cannot login the hardware directly through the console, I dont have the password for the console access, Could any one please help me resetting the password for the cisco DMM 5.1 physica server keeping the data and the configuration on the server intact.?
Please help!!Dear Fahad,
If you have lost your "admin" account password, it can be recovered using the "pwadmin" account as documented at the following link:
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_4/dms/aai/administration/guide/pwadmin.html#wp1079466
If you have lost your "pwadmin" password as well, you'll need to open a TAC case and get a "DMS 5.1 pwadmin reset" ISO image via TAC. You can then boot the appliance with the provided CD to reset the "pwadmin" password, then login as "pwadmin" and reset the "admin" password from there.
Regards,
Marco -
I can not view ANY videos on Vimeo, I have 'reset' the Ipad, original IOS 5, cleared the history and cookies, I haves changed the DNs number to 8.8.8.8, I have worked on this for 3 days now, HELP!!!!
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
-
I have duplicates of a song on an album. One of the duplicates is grey with no album cover. When you attempt to swite and delete, the track will not delete and will not even play. I've contacted iTunes store and the person I received the support email from told me that it may not be downloaded. I emailed him back and explained that no there is no download for that song in my itunes store on my phone.
One I never received an answer back which shows you how well these people do their job.
Two: I really would prefer to have a solution to this problem without having to delete all of my music from my phone or resetting my phone. Because this duplicate isn't even showing up in my iTunes, it's only showing up on my phone.
When I attempt to find it in my itunes it plays fine. But when I try to find the file to delete it, it is no where to be found. I've tried everything that I could think of to get rid of it. And I don't want to leave the album/artist off my phone because I do enjoy their music... And I have the microsoft sync in my car.
Anyone got any ideas on how to do this without resetting the phone and/or taking my music off?If you have all your music on the cmputer then i would connect up my phone uncheck the Sync Music option and apply.
This should take all the music off your phone .Then you can resync the music back on to it.
If this doesn't work maybe a restore to factory settings and start from scratch is the way to go -
I have a late-2011 13-inch MacBook Pro running OS X Yosemite. (Standard configuration).
My problem is that I downloaded a fan control application and it worked perfectly, but it started to get annoying so I deleted it.
Does anyone know how to reset the fan speed back to factory settings (Maybe a command in terminal?)Hello damo1177,
It should help to reset your system's SMC and NVRAM.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Cheers,
Allen
Maybe you are looking for
-
Need help in sales order creation
How to create a sales order ,invoice,credit memo step by step.
-
Sybase NULL to Oracle - Error with Fail
Hi, We are doing migration from Sybase 12 to oracle 9i using Oracle Migration Work Bench . Though we are able to successfully perform the migration , with all object count matching once migrated. When we launch our peoplesoft application on top of th
-
I have to give the technical names to abaper for following fields to be pri
I have to give the technical names to abaper for following fields to be printed in the GRN print out what r the table & field names for following Buyer's name Project Number / Cost Center Suppliers Delivery Note Number Quantity Remaining (per M
-
Air Application URL Path Issue
I am trying to invoke a content of the file which is in shared folder from Air application. Version : Flash builder 4.5,Flex3.6 sdk and Air 2.7. for this am using the below code.. var request:URLRequest = new URLRequest(); //request.url = ('file:///
-
HOW TO ADD TEMPLATE TO DREAMWEAVER?
CAN SOMEONE GIVE ME BASIC STEPS TO ADD A TEMPLATE. I DOWNLOADED THE .ZIP FILE TO MY DESKTOP. ANY AND ALL INFO IS APPRECIATED.