Resetting the metrics shown in Oracle EM console

Using Oracle EM console we can see the metics with respective to the "Services and references" pertaining to a SOA composite. It shows number of faults and average processing time etc... Even after purging the SOA composites I still see the metrics displayed in EM. Can anyone share how we can reset these metrics and where exactly these metrics store.

Hi, have you got any solution to this problem? I am having exact the same issue in 11.1.1.6.

Similar Messages

Reset the control numbers in Oracle B2B

Is there a provision for reseting the ISA / GS control numbers for outbound documents in B2B ?
We are presently moving from an older EDI translator to B2B, and the requirement is to ensure that we start from the next number that the older translator has generated for the ISA and GS control numbers. This would ensure that the trading partners don't receive a duplicate control numbers (control number already generated by the previous translator) and may reject the file, marking it as duplicate. Most trading partners check for duplicates based on control numbers of the incoming file.
Any help would be appreciated ?

Hello Shailesh,
Please reset the control numbers in B2B_CTLNUM_OUT table.
Rgds,Ramesh

Possible to reset component metrics in OEM?

Is it possible to reset the component metrics in OEM for a given composite app?
I'd like to run a baseline performance test, reset the metrics, then do a revised run & profile the change.
This is straightforward in OSB, but I haven't seen a way of doing it in OEM.
thanks
Garret

Hi...
If you are referring to a MobileMe account, try this support article > Mac OS X: Resetting the SyncServices folder
If instead you are referring to restarting the AMDS, for Mac OS X v10.6.8 or earlier > iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X

Oracle ODB Console will not start - Oracle 11.1g

PC info: Windows XP
Oracle new install: 11.1 g
Listener is running. I can log-in to SQLPLUS from DOS as sysdba and run commands. But I can not start the Oracle Enterprise Manager session. I get the error " Can't establish connection to xx.xxx.xx.xxx:1158 "
When I try to start the service in windows ORACLE DB CONSOLE ORCL, I get the following error:
================================================================================
Windows could not start the ORACLE DB CONSOLE ORCL on local computer. For more review the system even log. If this is a non-Microsoft service, contact the service vendor, and refer to the service-specific error code 2.
======================================================================================
Please advice.
I am seeing this error in log client folder:
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2012-04-11 08:03:28.968: [ OCROSD][1884]utgdv:1:could not open registry key SOFTWARE\Oracle\ocr os error The system could not find the environment option that was entered.
2012-04-11 08:03:29.015: [ OCRRAW][1884]proprinit: Could not open raw device
2012-04-11 08:03:29.015: [ default][1884]a_init:7!: Backend init unsuccessful : [33]
2012-04-11 08:03:31.437: [ CSSCLNT][1884]clsssinit: error(32 PROC-32: Cluster Ready Services on the local node is not running Messaging error [9]) in OCR initialization
Thanks.
Edited by: 789308 on Apr 11, 2012 6:32 AM
emomos log last entries ( note they are old from January, I am not seeing new error logs):
==========================================================================================
2012-01-18 16:54:32,765 [shutdownHookThread] WARN jdbc.ConnectionCache _getConnection.353 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying
2012-01-18 16:54:53,984 [shutdownHookThread] ERROR em.notification unregisterOMS.1417 - Error unregistering: Io exception: The Network Adapter could not establish the connection
java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:390)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:519)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:167)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:816)
     at oracle.jdbc.pool.OracleDataSource.getPhysicalConnection(OracleDataSource.java:325)
     at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:235)
     at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPhysicalConnection(OracleConnectionPoolDataSource.java:157)
     at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:94)
     at oracle.jdbc.pool.OracleImplicitConnectionCache.makeCacheConnection(OracleImplicitConnectionCache.java:1702)
     at oracle.jdbc.pool.OracleImplicitConnectionCache.getCacheConnection(OracleImplicitConnectionCache.java:575)
     at oracle.jdbc.pool.OracleImplicitConnectionCache.getConnection(OracleImplicitConnectionCache.java:435)
     at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:432)
     at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:203)
     at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:179)
     at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:359)
     at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:322)
     at oracle.sysman.util.jdbc.ConnectionCache.getUnwrappedConnection(ConnectionCache.java:575)
     at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:207)
     at oracle.sysman.emSDK.svc.conn.ConnectionService.getSystemConnection(ConnectionService.java:1304)
     at oracle.sysman.emdrep.notification.NotificationMgr.unregisterOMS(NotificationMgr.java:1408)
     at oracle.sysman.emdrep.notification.NotificationMgr.destroy(NotificationMgr.java:1867)
     at oracle.sysman.emSDK.svc.ServiceUtil.cleanupServices(ServiceUtil.java:212)
     at oracle.sysman.eml.app.ContextInitializer.contextDestroyed(ContextInitializer.java:878)
     at com.evermind.server.http.HttpApplication.destroyContextListeners(HttpApplication.java:5651)
     at com.evermind.server.http.HttpApplication.destroy(HttpApplication.java:5618)
     at com.evermind.server.http.HttpSite.destroy(HttpSite.java:865)
     at com.evermind.server.http.HttpServer.destroy(HttpServer.java:549)
     at com.evermind.server.ApplicationServer.destroy(ApplicationServer.java:1937)
     at com.evermind.server.ApplicationServerShutdownHandler.run(ApplicationServerShutdownHandler.java:94)
     at java.lang.Thread.run(Thread.java:595)
=================================================================================================
Edited by: 789308 on Apr 11, 2012 7:13 AM
When I run this command: C:\>emctl status dbconsole
I get : ENVIRONMENT VARIABLE ORACLE_SID NOT DEFINED. PLEASE DEFINE IT.
Edited by: 789308 on Apr 11, 2012 7:22 AM
Edited by: 789308 on Apr 11, 2012 7:41 AM
This is what I did:
SQL> emctl status dbconsole
SP2-0734: unknown command beginning "emctl stat..." - rest of line ignored.
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Pr
oduction
With the Partitioning, OLAP, Data Mining and Real Application Testing options
C:\Documents and Settings\AIM>emctl status dbconsole
Environment variable ORACLE_SID not defined. Please define it.
C:\Documents and Settings\AIM>set oracle_sid=orcl
C:\Documents and Settings\AIM>emctl stop dbconsole
OC4J Configuration issue. C:\app\AIM\product\11.1.0\db_1/oc4j/j2ee/OC4J_DBConsol
e_10.101.15.141_orcl not found.
C:\Documents and Settings\AIM>emctl start dbconsole
OC4J Configuration issue. C:\app\AIM\product\11.1.0\db_1/oc4j/j2ee/OC4J_DBConsol
e_10.101.15.141_orcl not found.
Edited by: 789308 on Apr 11, 2012 7:42 AM
Edited by: 789308 on Apr 11, 2012 10:31 AM

I get : ENVIRONMENT VARIABLE ORACLE_SID NOT DEFINED. PLEASE DEFINE IT.so then
SET ORACLE_SID=FOOBAR

Not able to reset the Oracle BI Repository password

Hi All,
I am in stage of implementing the BIA. during the steps 4.15.3 (To reset the Oracle BI Repository password) mentioned in the doc http://docs.oracle.com/cd/E20490_01/bia.7963/e19038/windows_ic.htm , I can't see the security filed in manage menu. I have opened this in offline mode.
Pleas help me on this.
Thanks,

Hi,
The Manage Security is OBI10g in 11g its Manage --> Identity. Addition to this in OBI11g the user's are managed in weblogic.
Let me know if this helped you.
Regards,
Jay

Resetting the Oracle database

Hi
I want to Reset oracle database enterprise edition 10.2 installed on my machine. It had a product installed previously on it. I have deleted the tablespaces along with their datafiles used by that product. Product had some users as well. Apart from dropping tablespaces what else should i do in order to make the database to resemble a fresh installation of oracle 10.2 on any system?

919362 wrote:
Hi
I want to Reset oracle database enterprise edition 10.2 installed on my machine. It had a product installed previously on it. I have deleted the tablespaces along with their datafiles used by that product. Product had some users as well. Apart from dropping tablespaces what else should i do in order to make the database to resemble a fresh installation of oracle 10.2 on any system?If I understand you correctly, all you want to do is get a nice, new, totally unused and empty database. If that is true, the simplest way is to ignore the current database and create a new one from scratch using DBCA.
Note that this does NOT mean a reinstall - Oracle keps the software separate from the database, and yuo can have any number of databases running from one ORACLE_HOME. (ORACLE_HOME is the basis of the software install.)
Since you don't mention operating system, I will assume Windows. (Most people who use only Windows seem to assume that other OSs do not exist, or seem to believe that other OSs are just a copy of Windows, and therefore don't bother telling us any important details about the OS. ;-))
On Windows, to run DBCA for 10gR2, follow the instructions in the documentation at http://docs.oracle.com/cd/B19306_01/server.102/b14196/install003.htm
(On Linux or Unix, set your ORACLE_HOME by running oraenv for the current SID, then enter dbca and you will be able to follow the DBCA instruction in either the above manual or in the Linux/Unix counterpart.)
By the way, DBCA can also be used to wipe out the current DB, including reset the Windows registry so the defunct DB Service does not fire up. Only challenge is that older versions of DBCA did not clean up the disk space used for tablespaces.

Oracle Database Console Service not starting on Windows 2008 R2

I am installing Oracle 11G
The database installs fine, however Database Console service will not start. The java process is launched and I get the login screen, however after logging in I see: Error: Internal Error has occurred. Check the log file for details.
I check emoms.trc and I found the following:
2011-07-08 11:22:16,037 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.420 - Integration Class not found: oracle.sysman.pp.asprov.ui.intg.ASProvisioningIntegration
2011-07-08 11:22:16,037 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.420 - Integration Class not found: oracle.sysman.pp.paf.sample.ui.intg.PAFDemoIntegration
2011-07-08 11:22:16,037 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.420 - Integration Class not found: oracle.sysman.emCLI.CLIIntg
2011-07-08 11:22:16,037 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.420 - Integration Class not found: oracle.sysman.emCLI.CLIDownloadIntg
2011-07-08 11:22:17,285 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.420 - Integration Class not found: oracle.sysman.eml.target.slb.common.SLBIntegration
2011-07-08 11:22:22,808 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.420 - Integration Class not found: oracle.sysman.pp.sidb.ui.intg.SIDBProvisioningIntegration
2011-07-08 11:22:23,089 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.420 - Integration Class not found: oracle.sysman.pp.racprov.ui.intg.RACProvIntegration
2011-07-08 11:22:23,089 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.420 - Integration Class not found: oracle.sysman.pp.ec.ui.intg.ExtendClusterIntegration
2011-07-08 11:22:23,135 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.420 - Integration Class not found: oracle.sysman.pp.dn.ui.intg.DltNodeIntegration
2011-07-08 11:22:23,135 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.420 - Integration Class not found: oracle.sysman.pp.common.ui.intg.ProvCommonIntegration
2011-07-08 11:22:23,135 [OC4J Launcher] ERROR app.ContextInitializer contextInitialized.420 - Integration Class not found: oracle.sysman.pp.bpelprov.ui.intg.BPELProvisioningIntegration
2011-07-08 14:41:07,079 [EMUI_14_41_06_/console/database/instance/sitemap] ERROR perf.sitemap initializeGeneral.580 - Failed to initialize object: ORA-20206:
ORA-06512: at "SYSMAN.EMD_DATABASE", line 1297
ORA-01403: no data found
ORA-06512: at line 1
2011-07-08 14:41:08,779 [MetricCollector:HOMETAB_THREAD600:60] ERROR rt.DbMetricCollectorTarget _getAllData.344 - java.lang.NullPointerException
java.lang.NullPointerException
     at oracle.sysman.emSDK.emd.comm.EMDClient.getURL(EMDClient.java:1570)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getConnection(EMDClient.java:1266)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getConnection(EMDClient.java:1242)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1689)
     at oracle.sysman.emSDK.emd.comm.EMDClient.getMetrics(EMDClient.java:981)
     at oracle.sysman.emo.perf.metric.rt.DbHomeTab._getAllData(DbHomeTab.java:340)
     at oracle.sysman.emo.perf.metric.rt.DbHomeTab.getData(DbHomeTab.java:154)
     at oracle.sysman.emo.perf.metric.eng.MetricCached.collectCachedData(MetricCached.java:416)
     at oracle.sysman.emo.perf.metric.eng.MetricCollectorThread._collectCachedData(MetricCollectorThread.java:605)
     at oracle.sysman.emo.perf.metric.eng.MetricCollectorThread.run(MetricCollectorThread.java:325)
     at java.lang.Thread.run(Thread.java:595)
I went here SYSMAN.EMD_DATABASE", line 1297 and found the below query:
SELECT target_guid, type_display_name, last_load_time,
TYPE_META_VER, CATEGORY_PROP_1, CATEGORY_PROP_2, CATEGORY_PROP_3,
CATEGORY_PROP_4, CATEGORY_PROP_5,
NVL(to_char(from_tz(CAST(last_load_time AS TIMESTAMP),
timezone_region),
'TZD'),
'GMT ' || to_char(from_tz(CAST(last_load_time AS TIMESTAMP),
timezone_region),
'TZR'))
INTO targetGuid, typeDisplayName, lastUpdatedTime,
meta_ver, cat_prop_1, cat_prop_2, cat_prop_3,
cat_prop_4, cat_prop_5,
timeZone
FROM mgmt_targets
WHERE target_name = targetName
AND target_type = targetType;
I do not know what is being passed for variables, however there is only one row in that table (Target_name=Management Services and Repository) and in another database instance I have 5.
I have tried uninstalling the entire database several times and I have also used emca -deconfig dbcontrol db -repos drop and emca -config dbcontrol db -repos create several times after updating my host file (even though I have a static IP). Any assistance would be greatly appreciated.
Thanks,
Ben

Hi Eric,
Thanks for the reply. I do have enough disk space. This is a new server with over a TB of free space on the drive where I am installing.
Thanks,
Ben

How to reset the JSF Portlet session state in weblogic portal 10.3

Hi All,
We are implementing our application with the jsf1.2 with 10.3.0 portal framework.
in a tab i placed my jsf portlet, it will navigate up to 4 pages. We do have some other tabs too in our application. So when i navigate to other tabs and when i comeback to the jsf portlet tab i am resetting the portlet state to first page by onDeactivation portal event.
But the problem when the user within the tab and navigate to pages if he clicks again the tab it is not redirecting to start page.
I know we do have refresh action in our pageflows .. but how to reset the jsf portlet to start page when it is not deactivating. Please do help me..
Thanks in advance...
Edited by: Siddu4u on Oct 10, 2011 8:33 PM

Hello,
This documentation should help you to use the import tool in the Portal Admin Console:
http://download.oracle.com/docs/cd/E15919_01/wlp.1032/e14245/deployment.htm#i1047336
Kevin

Installing the Enterprise Manager 10g (Browser-based) Console

i've installed the oracle 10g client and am successfully running the OEM 10g java interface. however, when i try to start the web browser-based interface, i get a "page cannot be displayed" error. the URL shown is <the name of the machine: >/em
Are any special procedures required for installing the Enterprise Manager 10g (Browser-based) Console???

There seems to be some confusion with what you are installing. Your original question was how do you install the DBConsole for 10g. When you install a 10g database, you get the option of either installing a database console or point to a Grid Control. If you need to reinstall the database console for some reason, you use the emca utility.
From your last note, it seems u don't have any Oracle database running on ur server...

Read only user creation for Oracle EM Console 11.1.1.5

Dear All.
I have created Read only user for Oracle EM Console.
I have followed below link to do the same
http://moshe-soa.blogspot.com/2011/09/blog-post.html.
I have noticed with read only user is that TEST button in EM Console is active means user with read only user can create a trans, in Prod scenario it is a risk.
Raised a CR with Oracle and found that it is a bug
Bug 14082464 - CANNOT DISABLE TEST/TEST WEB SERVICE BUTTON IN SOA EM COSOLE is there in Metalink.
So my question is there any way by which i can disable the TEST button in EM Conasole.
I think there are some WLST script or servlet java class available to resolve this issue.
Can any one confirm this and please suggest if any one aware of any alternative method.
Thanks,

Hi, have you got any solution to this problem? I am having exact the same issue in 11.1.1.6.

How do i reset the password for cisco DMM 5.1 hardware machine

Dear All,
I have a cisco DMM 5.1 with some players installed on it, I can login to the dmm 5.1 via web browser but I cannot login the hardware directly through the console, I dont have the password for the console access, Could any one please help me resetting the password for the cisco DMM 5.1 physica server keeping the data and the configuration on the server intact.?
Please help!!

Dear Fahad,
If you have lost your "admin" account password, it can be recovered using the "pwadmin" account as documented at the following link:
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_4/dms/aai/administration/guide/pwadmin.html#wp1079466
If you have lost your "pwadmin" password as well, you'll need to open a TAC case and get a "DMS 5.1 pwadmin reset" ISO image via TAC. You can then boot the appliance with the provided CD to reset the "pwadmin" password, then login as "pwadmin" and reset the "admin" password from there.
Regards,
Marco

How do I restrict the items shown in Action pull-down list in Quote Overiew

I would like to restrict the items shown in the pull-down list of Actions in Quote Overview Screen in Oracle Quoting (HTML)
The list is defined as part of Quick Codes (Lookup_type = ASO_QUOTE_ACTION). Per my understanding, it should show up all the lookup values enabled in ASO_QUOTE_ACTION. But I see only a few of those enabled in the action drop-down list in Overview Screen.
I appreciate if any one can provide any clue where they are restricted.
To access ASO_QUOTE_ACTION Loookup code, here is the navigation path.
® Quoting Sales Manager → (N) Setup → Quick Codes and query for ASO_QUOTE_ACTION.
Thanks
Rao

Wrong Forum....

I purchased bioshock 2 on the app store on my macbook pro (running lion) and it shows 'an error has occured' every time I try to download the app. How do I install it properly, I have restarted my mac and reset the app on the debug menu?

I purchased bioshock 2 on the app store on my macbook pro (running lion) and it shows 'an error has occured' every time I try to download the app. How do I install it properly, I have restarted my mac and reset the app on the debug menu?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

"Offive" in the user dictionary and I can't remove it even after reset the dictionary

Hi all,
I found that I have a word "Offive" in my user dictionary.
I tried to remove it by resetting the keyboard / dictionary; however, the word "Offive" is still there immediately after I reset the dictionary.
I searched for the word "Offive" in my contacts and calendars. And, there are no such occurence.
Interesting, the word "Offive" only appears in my iPhone; I have an iPad2, but the word "offive" isn't shown in the iPad at all.
Do you know how iOS user dictionary added this word "Offive" automatically?
When I typed "Offibe", iOS would automatically change it to "Offive" and then informed it's a misspell and I then changed it to "office" by clicking the word "Offive". This is clumsy.
Thanks,
Ting Pong

It wouldn't have been added automatically. Words are added to the dictionary when you decline autocorrect suggestions. You just have typed "offive" and then tapped the '"x" to decline the autocorrect suggestion "office" at some point, probably by mistake.

Error when accessing Oracle BPEL console

The following error message shows up when access oracle BPEL console. Any advice to resolve this error? Thanks a lot in advance!
***************************************************************************** Oracle BPEL Server version 10.1.3.1.0 Build: 0 Build time: Mon Oct 09 08:44:49 PDT 2006 Build type: release Source tag: PCBPEL_10.1.3.1.0_GENERIC_061009.0802
Exception Message:
[java.lang.NoClassDefFoundError] org/apache/log4j/Category
Exception Trace:
java.lang.NoClassDefFoundError: org/apache/log4j/Category at java.lang.Class.getDeclaredConstructors0(Native Method) at java.lang.Class.privateGetDeclaredConstructors(Class.java:2328) at java.lang.Class.getConstructor0(Class.java:2640) at java.lang.Class.getConstructor(Class.java:1629) at org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogFactoryImpl.java:410) at org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.java:529) at org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.java:235) at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:370) at org.collaxa.thirdparty.apache.axis.components.logger.LogFactory.getLog(LogFactory.java:37) at org.collaxa.thirdparty.apache.axis.encoding.TypeMappingImpl.(TypeMappingImpl.java:68) at com.collaxa.cube.engine.deployment.TypeSoapRegistry.registerHeaderTypes(TypeSoapRegistry.java:251) at com.collaxa.cube.engine.deployment.TypeSoapRegistry.load(TypeSoapRegistry.java:79) at com.collaxa.cube.engine.core.TypeRegistry.load(TypeRegistry.java:126) at com.collaxa.cube.engine.CubeEngine.__load(CubeEngine.java:613) at com.collaxa.cube.engine.CubeEngine.load(CubeEngine.java:474) at com.collaxa.cube.admin.ServerManager.loadDomain(ServerManager.java:1111) at com.collaxa.cube.admin.ServerManager.loadAllDomains(ServerManager.java:924) at com.collaxa.cube.admin.ServerManager.init(ServerManager.java:111) at com.collaxa.cube.ejb.impl.ServerBean.init(ServerBean.java:254) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35) at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119) at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52) at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119) at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31) at java.security.AccessController.doPrivileged(Native Method) at javax.security.auth.Subject.doAs(Subject.java:396) at com.evermind.server.ThreadState.runAs(ThreadState.java:622) at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34) at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119) at com.evermind.server.ejb.interceptor.system.TxNotSupportedInterceptor.invoke(TxNotSupportedInterceptor.java:43) at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119) at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52) at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119) at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55) at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87) at ServerBean_RemoteProxy_4bin6i8.init(Unknown Source) at com.collaxa.cube.admin.CXLoaderServlet.init(CXLoaderServlet.java:60) at javax.servlet.GenericServlet.init(GenericServlet.java:256) at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2361) at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4810) at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4734) at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4922) at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1134) at com.evermind.server.http.HttpApplication.(HttpApplication.java:738) at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:414) at com.evermind.server.Application.getHttpApplication(Application.java:545) at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1990) at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.(HttpSite.java:1909) at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:645) at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:290) at com.evermind.server.http.HttpServer.setSites(HttpServer.java:270) at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:177) at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2450) at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:998) at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131) at java.lang.Thread.run(Thread.java:595)

ru able to login to the other applications on your App server ... viz.
Oracle App Server Console, ESB Console, Worklist App ... etc

Resetting the metrics shown in Oracle EM console

Similar Messages

Maybe you are looking for