Resetting the Noise Margin after Upgrade to 21CN

Hello,
A few weeks ago I requested the Noise Margin resetting when I was on ADSL Max - which worked a treat  However, since then I've been upgraded to 21CN (see below) and the Noise Margin has jumped back up to an average of about 9db.  The line has been 100% stable, but the Download speed has dropped slightly  (although the Upload is a nice 1mb! ).  
Please can someone post a link so I can contact the Mods again?  
Thanks.

Here's a copy of the Stats so far.
FAQ
Test1 comprises of two tests
1. Best Effort Test:  -provides background information.
Download  Speed
4618 Kbps
0 Kbps
7150 Kbps
Max Achievable Speed
 Download speedachieved during the test was - 4618 Kbps
 For your connection, the acceptable range of speeds is 2000-7150 Kbps.
 Additional Information:
 Your DSL Connection Rate :5888 Kbps(DOWN-STREAM), 1187 Kbps(UP-STREAM)
 IP Profile for your line is - 5000 Kbps
2. Upstream Test:  -provides background information.
Upload Speed
981 Kbps
0 Kbps
1187 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 981 Kbps
 Additional Information:
 Upstream Rate IP profile on your line is - 1187 Kbps

Similar Messages

  • My Macbook is running on OS 10.5.8. However, I forgot my admin password. I would like to find out if I can use OS 10.6 CD to reset the admin password while upgrading OS? Also, will all my files be still present after upgrade??

    My Macbook is running on OS 10.5.8. However, I forgot my admin password. I would like to find out if I can use OS 10.6 CD to reset the admin password while upgrading OS? Also, will all my files be still present after upgrade??

    1. Should be possible to do that; go to the Utilities menu and select 'reset password' before starting the installer. (while booted from the DVD of course)
    2. Standard installation of SL only replaces system components; applications, user data and preference settings should not be affected.
    3. But you do have a backup just in case, don't you?

  • I have a Sony radio in my car.   With IOS  4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio.  After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone .  Any t

    I have a Sony radio in my car.   With IOS  4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio.  After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone .  Any thoughts.

    I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?

  • My Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

    my Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

    I change Settings>Privacy>Location Services>Camera to OFF and then ON and the locations start to appear !!!!.
    It seems to be Apple bug.
    Thanks for you efforts

  • Unable to  get the login page after upgrade from 11.5.10.2 to R12

    Hi ,
    We are unable to get the login page after upgrade from 11.5.10.2 to R12, all the services are up and running.
    Pls let me know if someone has come across this issue.
    Thanks&Regards,
    Apps DBA

    Hi ,
    After compile JSP files manually , now we are facing problem after logging.
    Error : You have encountered an unexpected error.
    Thanks&Regards,
    Apps DBA

  • Stuck in a "loop" at the login window after upgrading to Leopard

    I bought a new iMac Oct 26. It contained Tiger, and included a disk for installing Leopard. I easily got the machine up and running using Tiger, but last night I attempted to install Leopard. When the installation was complete, I tried to get it running. A screen asking for my password came up. I keyed that in and hit logon. Back came the screen asking for the password. To make long story short, I tried everything I could last night, and then called Apple Support this morning. Took quite a while, but I was back in business this afternoon. The technician who helped me sent me the email copied below describing the solution. Perhaps it will help someone else? Romelle
    Hello from Apple!
    Charles at Apple Service & Support thought that you might find this article useful. We hope that it helps resolve your technical issue.
    Link: http://www.info.apple.com/kbnum/n306965
    Mac OS X 10.5, iMac (Late 2007): Stuck in a "loop" at the login window after upgrading to Leopard
    Issue or symptom
    After installing Mac OS X 10.5 Leopard on a 20-inch or 24-inch iMac (Late 2007) computer, you may not be able to log in at the login window. Your login name and password are apparently accepted, but after a blue screen appears for a few seconds, the login window reappears instead of your desktop.
    Products affected
    20-inch or 24-inch iMac (Late 2007) computer with 2.0, 2.4, or 2.8 GHz processors
    Mac OS X 10.5 Leopard
    Solution
    If Leopard is installed
    Start up from the Leopard Install DVD and perform an Archive and Install installation (and select Preserve Users and Network Settings).
    After the Archive and Install is complete, you should be able to successfully log in. Use Software Update to install any other updates.
    Important: Install the iMac Software Update 1.3 for Leopard after the Archive and Install is complete.
    If Leopard is not yet installed
    If you have not yet installed Leopard on your 20-inch or 24-inch aluminum iMac computer with a 2.0, 2.4, or 2.8 GHz processor running Mac OS X 10.4.x, but previously installed the iMac Software Update 1.2, you should install the iMac Software Update 1.2.1 (Tiger) or later, before installing Leopard.
    Thank you,
    Apple

    If Leopard came pre-installed and this is a new machne, then the disks that came in the box should let you archive install preserving users & network settings. The disks have a grey label, and if you get more than one use disk #1 for this procedure.
    Hold down the "option" (also known as "alt" on the new keyboards) key when starting up with disk #1 in the optical drive. Select the install disk icon on the grey screen and click the arrow. Then when you get to the "select destination pane, click the options button after selecting your hard drive as the destination. In options A& I preserving should be checked by default, if not, select them. Click "ok" to dismiss the options pane, then run the installation.
    If this does not work for you, call apple support. They want everything to work. Be patient, they are real busy these days.
    Slim

  • Why does my iPad Air shows no service on the top left hand corner? It has been working fine previously, the problem started after upgrading to IOS 7.1.2

    Why does my iPad Air shows no service on the top left hand corner? It has been working fine previously, the problem started after upgrading to IOS 7.1.2

    If you are not using Cellular Data, turn it off.

  • Problems to reconize the sim card after upgrade itunes, what should I do???

    Problems to reconize the sim card after upgrade itunes, what should I do???

    Get a SIM card from the carrier to whom the phone is legitimately locked.

  • CS5 can't preview the fonts image after upgrade the OS X 10.10.1

    My CS5 can't preview the fonts image after upgrade the OS X 10.10.1,
    Wanna try to reinstall the AI but my disc read error. Anyone has this problem or solution, Many Thanks!!

    Thanks but can't find this "system transparency" setting inside the illustrator. Search the key word doesn't work...

  • How to trobleshoot an ipod touch. yesterday i tried to reset the setting then after i click reset it suddenly shut and after a few minutes an apple logo came out. It cannot be open anymore until now. what will i do.please help me thank u

    how to trobleshoot an ipod touch. yesterday i tried to reset the setting then after i click reset it suddenly shut and after a few minutes an apple logo came out. It cannot be open anymore until now and the logo is still their. what will i do.please help me thank u

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • Cannon MP830 can't use the scanner function after upgrading to Mavericks.

    I have an Cannon MP830 and now I can't use the scanner function after upgrading to Mavericks.  Can someone help?

    There is no ICA driver for this model so you won't be able to use Image Capture or Preview. But there is a TWAIN scanner driver and the supporting MP Navigator application available for 10.8 from Canon, so you could try installing these and see if you can scan again.

  • Mailbox move completes but get "Failed to reset the target mailbox after the move" 481/481

     
    moving a mailbox from exchange 2013 to exchange 2010: it completes but the process tries to reset the target mailbox as a final step about 481 times then gives permanent exception error:
    Failed to reset the target mailbox after the move. Attempt 481/481. Error: SuitabilityDirectoryException
    Target mailbox reset operation was not replicated. Error: TargetMailboxConnectionWasLostPermanentException
    Anand_N

    I have tried moving several different accounts, none of them admin accounts, all getting the same error. I am logged in as domain admin with full rights to exchange. The issue occurs when moving mailboxes from exchange 2013 to exchange 2010.
    1/30/2014 7:24:56 AM [e1] Move has completed and final clean up has started.
    1/30/2014 7:24:57 AM [e1] Source mailbox 'Primary (4bfda0fd-c991-4d40-8f0f-394411ef6848)' was successfully cleaned up after the move.
    1/30/2014 7:24:57 AM [e1] Failed to reset the target mailbox after the move. Attempt 1/481. Error: CouldNotFindDCHavingUmmUpdateTransientException.
    1/30/2014 7:24:57 AM [e1] Post-move cleanup failed. The operation will try again in 30 seconds (1/481).
    1/30/2014 7:25:32 AM [e1] Failed to reset the target mailbox after the move. Attempt 2/481. Error: SuitabilityDirectoryException.
    1/30/2014 7:25:32 AM [e1] Post-move cleanup failed. The operation will try again in 30 seconds (2/481).
    This is four hour wait period. before getting the error :
    Target mailbox reset operation was not replicated. Error: TargetMailboxConnectionWasLostPermanentException
    Anand_N

  • Can i set the noise margin with NetGear DGN1000

    Hi
    i'm looking for a new router to replace my HH2 for the main reason of setting my own noise margin i dont want something to pricey so i came across the NetGear DGN1000 it's got pretty decent specs but does it allow me to set my own noise margin ?? also do you recommened this router ??

    The DGN1000 doesn't have a Broadcom chipset so I don't think you can set the noise margin. The DGN2000 is a better router.

  • How can you change apps store when you travel around the world?  After upgrading to IOS6, suddently my iPad has switch me to the greek apps store instead of leaving me into my canadian apps store.  Therefore, I cannot upgrade 60  apps on my iPad.

    How can you change apps store when you travel around the world? 
    After upgrading to IOS6, suddently my iPad has switch me to the greek apps store instead of leaving me into my canadian apps store.
    Therefore, I cannot upgrade 60+ apps on my iPad.
    Does someone know how to revert this situation?
    Thanks for your help!

    Try this:
    1. App Store>Feature>Apple ID (at bottom of page)
    2. Tap on Apple ID>View Apple ID
    4. Enter your password
    5. Country/Region>Change Country or Region

  • Why the iPhone 4 16GB drains out the battery faster after upgrading to ios 5?

    Why the iPhone 4 16GB drains out the battery faster after upgrading to ios 5?

    Not sure, but try this:
    Let the battery drain to below 20% (I went to about 14%).
    Plug your phone in and leave it to charge COMPLETELY. This took my phone somewhere around 4 hours to complete.
    When you're done, you may have better luck keeping a charge.
    iOS 5 adds a lot of additional communication, and every time you connect wirelessly to anything, more power is used. Even so, some people report that a battery cycle like this helps. It seems to have worked for me.

Maybe you are looking for