Resident rates and School District rates

Hi Experts,
Could you please tell me where do we configure Resident rates (Example: for Ohio locals) and School district rates. Do we need to configure those in SAP and BSI? or only in BSI? Because I could not find any table to configure in those SAP.
Please reply.
Thanks and Regards,
Sreenivas

Hi Sreenivas,
This is Kathy from BSI Support. The resident and non-resident tax rates are maintained by BSI. The only thing you need to do is continue to apply regulatory bulletins as usual.
If you have any further questions or need additional assistanc,e, please contact us at support.
Regards,
BSI Support - Kathy

Similar Messages

Streaming multi bit rate and single bit rate

I'm trying to simplify my setup. Sometimes I need to stream multi bit rate and sometimes I need to stream single bit rate. This is due to the internet connections I'm sending from sometimes have poor upstream and multi-bit rate is too much bandwidth to send... So.... We resort to single bitrate. As I understand my encoder and server settings are different for each of these... I created a single and multi-bitrate profile for Adobe Media Encoder. That was simple enough. My question/concern is in regards the server settings. I would like to have a server setting for multi-bitrate and a setting for single bit rate. My goal is to void making changes on the server. I simply want to load the desired Adobe Media Encoder Profile. So, do I need to create a dedicated event for single bitrate? Below is the syntax I send to my server from Adobe Live Encoder. Instead of using 'liveevent' for my event would I just give it a different name? Does this stand true for my .m3u8 files? I'm confused to how to name differnet event/streams....
livestream%i?adbe-live-event=liveevent&adbe-record-mode=record

Hi,
When you use a setting like: livestream%i?adbe-live-event=liveevent then the encoder expects multibitrate streams (the %i is replaced by a number so the streams published will be livestream1, livestream2 and livestream3). You cannot use the same setting in the encoder for single stream. Instead you'll have to use livestream?adbe-live-event=<event_name>. You could create a new event under the same application.
Hope this helps. Let me know if you have any other queries.
Thanks,
Apurva

FOREX Valuation - Old Rates and New Month Rates

Gurus,
The client records data in USD @ 0.26875.
The month-end / new month rate would be 0.26865.
Q1. The documents that have been recorded previously, with old rate; is it possible to change the rate of those documents. If so, where and how?
Q2. Needs steps for FOREX valuation - TCode - FAGL_FC_VAL
Q3. FAGL_FC_TRANS; what is this transaction used for?
Thanks.

Steps: for tcode FAGL_FC_VAL
1. Define Transalation Ratios for Currency Transactions
Path: SAP Netweaver -General Setting -Currencies -Define Transalation Ratios for Currency Transalation
2. Enter Exchange Rates
Path:SAP Netweaver -General Setting -Currencies Enter Exchange Rates
3. Foreign Currency Valuation Method
Path: Financial Accounting (New)- General Ledger Accounting (New) - Periodic Processing - Valuate - Define Valuation Methods
4. Define Valuation Areas
Path: Financial Accounting (New)-General Ledger Accounting (New) - Periodic Processing - Valuate - Define Valuation Areas
5. Define Accounts for Exchange Rate Differences
Path: Financial Accounting (New)-- General Ledger Accounting (New) - Business Transactions - Open Item Clearing - Define Accounts for Exchange Rate Differences
After above configuration run the T.C F.05 or FAGL_FC_VALfor valuation of currency
Regards
Hari Peddi

Sample rate and data recording rate on NI Elvis

I am currently working on a project that requires me to record my data at 1ms intervals or less. Currently the lowest timing interval I can record is at 10ms. If I change my wait timer to anything below 10 the recorded data in excel will skip time. For example instead of it starting at 1 ms and counting 2,3,4,5,6...,etc. It is skipping from 2,5,12,19,....,etc. So my question is if it is a limitation that I have reached on the NI Elvis or if it is possibly a problem with how I've created my LabVIEW code. My program from an operational stand point is working great, but it is my data recording that is causing me to not be able to move to my testing phase. Any help on this matter would be greatly appreciated.
Other information that might be relevant:
Operating System: Windows 7
Processor: Intel(R) Xeon(R) CPU E31245 @ 3.00 GHz
Memory: 12GB
DirectX Version: 11
Attachments:
Count Digital(mod12).vi ‏76 KB

Hi crashdx,
So my immediate thought on this issue is that the code inside your primary while loop might be taking too long to process to achieve such a high sample rate. Especially when making calls into external applications (such as Excel) which can take a large amount of itme.
There is a very useful debugging tool called the Performance and Memory tool. If you aren't familiar with this tool, it will allow you to see how much memory the various chunks of your code are using and, more importantly here, how much time each subVI is taking to execute. Does the code inside your while loop take longer than 1ms to run? If so, then you will definitely see unwanted logging behavior and will need to change your approach. Would it be possible to collect more than a single sample at a time and perform calculations on a large number of samples at once before writing them to Excel in bigger chunks?
I've included a link to the LabVIEW helpful detailing the Profile Performance and Memory tool.
http://zone.ni.com/reference/en-XX/help/371361H-01/lvdialog/profile/
I would first try and figure out how long it's taking your loop code to execute and go from there.
I hope this helps!
Andy C.
Applications Engineer
National Instruments

Increase in attainable rates and sync speed

I've noticed that my line is now syncing at 79999 down and 20000up, lasst week, and for the past 6 months the attainable rate has been 60000 down and 15000 up,
I'm still only getting 71000 down via the bt speedtest and 9000up, getting slightly better results on bbc though.
Also noticed my latency to the bbc is down from 25ms to 21ms
have there been any changes to the network or is this the DLM deciding that my line is good enough to handle higher speeds?

I don't think your line will improve even more, as you are at the limit of your package.
If you look at your modem stats you will see both sync rate and max attainable rate. The max attainable rate will only change significantly if something changes in your line. The sync rate will change as DLM thinks fit. If you see your max attainable rate is over around 90000, then maybe you could get more stable sync rate if BT offered a higher level Infinity package.
DLM will always keep your sync rate below the max attainable for stability. For reference, my values are a good but not perfect:
Max: Upstream rate = 23773 Kbps, Downstream rate = 81184 Kbps
Path: 0, Upstream rate = 20000 Kbps, Downstream rate = 73999 Kbps
Down Up SNR (dB): 7.9 14.5
Over the month or so I have been monitoring, my max attainable has dropped slightly, from just over 85000 to values around 82000. My sync speeds have gone up a lot to reach their current appropriate value, because I had had a previous wiring issue that had lowered my DLM.

Wt taxed at supplemental rate and other wt at regular rate

How do we define a wage type for supplemental tax rate and regular tax rate?
Thanks
Charlene

Thanks Ted:
Just new to SAP so now having quite a lot of issues to handle. You have been responding to my queries at ur earliest.
All:
My questions might sound stupid sometimes, but plz bear, I'm on learning phase..
Thanks
Charlene

Rebates- Accrual rate and Rebate Rate

Hi, I am working on Rebate configuartion.
Can any one explian me the difference between Rebate Rate and the Accrual Rate that we provide while creating Rebate agreement.
Regards,
Sunil

Hi,
The rebate rate is the rate at which you have made the agreement with the customer for a specified period.
Accrual is the total rebate need to be provide for the agreemnet period.
Regards

Report for inward and outward value/rate

We had an audit query regarding Inventory valuation. The auditor was not convinced of the price movements. Following is the procedure adopted by me to convince the auditor. In the process I located an error in the system. Kindly let me know which t-code I should use to get the correct values.
We are a Trading company engaged in distribution of Raw Materials (Chemicals) Imported - 99% & 1% local purchase.
Ours is a Moving Average Inventory system in SAP (ECC6). We adopted this because all our materials are imported and most of them are of a different batch no. barring a few exceptions.
I firstly took out the PO history tab screen shot for the value of the inventory (as well as Rate/kg) to know the valuation at the time of GRN. Then I went to MM03 for the same material with the same batch/valuation type so that the rate/kg is confirmed therein, in the Accounting1 screen. Thirdly, the Warehouse stock of Material report (MB52) was run to know the current values. At all these places, I found that the valuation is perfectly matching with the PO history MIRO values, which gives the inventory purchase value.
But when I ran the Material document list, (MB51) report, wherein the inward & outward values of the said batch of material is reported, the inventory value charged to COGS is matching with all the above reports in the previous paragraph for the material issued on various dates. However, the inward date even though it matches with the PO history MIRO date, the value does not match. Is it a report issue or a configuration issue.
Else is there any other report which gives the exact inward and outward value/rate??

Hi,
Check your material movement report with Transaction Code:S_P00_07000139.
System working perfectly on accounting document posting where price control available in material master play vital role.
Cross check your material master may have moving average price (price control -V) where system valuates goods receipts with the purchase order price and goods issues with the current moving average price.The system automatically calculates the latter upon every goods movement by dividing the total value by the total stock quantity ( Total Value/Total quantity)
Regards,
Biju K

Excise rate and value is not getting defaulted from the purchase order

Hi all,
While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
Regards
Vishal

Hi,
Follow STO Process for this;
1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
10. Create Delivery: VL10G
12. Picking, PGI: VL02N
13. Billing: VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Rgs

I switched on the voice over at its minimum rate and now i am not able to slide the screen and unlock it, i switched on the voice over in ipad 2 ios 6 at its minimum rate and now i am not able to slide the screen and unlock it

i switched on the voice over at its minimum rate and now i am not able to slide the screen and unlock it, i switched on the voice over in ipad 2 ios 6 at its minimum rate and now i am not able to slide the screen and unlock it please advise

You should be able to turn it off on the iPad by using 'a tap-to-select and then double-tap to activate/type process' and 3 fingered scrolling to go into Settings > General > Accessibility and turn it 'off' (so to use the 'slide to unlock' tap the slider and then double-tap it, and to type your passcode tap a digit and then double-tap it etc), or you can do it by connecting to your computer's iTunes : http://support.apple.com/kb/HT4064

Error message trying to synchronise audio and midi sample rate 42463

I have a Rode Podcaster mic that is terrific. It has been working fine in GB. suddenly I am getting this when I try to record my podcast:
'Error message trying to synchronise audio and midi sample rate 42463 recognised. Check conflict between Garageband and external device'
Has anyone experienced this before? How do I resolve it? I'm still using my Version 6.0.5.
Apple, is this a way of forcing me to upgrade to V10?

Just click the icon on each track that stops it acting as a live input. It looks like a sound wave. Only have them clicked orange when using the track to record! I don't know if that will solve your problem!

Error while trying to sync audio and MIDI, sample rate 39100 recognised??

When I press record a message appears saying 'error while trying to syncronise audio and MIDI, sample rate 39100 recognised. Check conflict between garage band and external device. I'm using a Behringer UMC-202 interface. The inputs are selected as the device but no audio is present either.

Just click the icon on each track that stops it acting as a live input. It looks like a sound wave. Only have them clicked orange when using the track to record! I don't know if that will solve your problem!

Rate and accessable value is not displaying for the tax invoice output

Hello All,
Rate and accessable value is not displaying for the tax invoice output. Rest of all outputs for invoices shows Rate and accessable value.
Scenerio is free of charge sales order (samples) removing the goods from pant so excise invoice has been created and also updated. but for tax invoice out put rate and access value is not displaying.
Pricing procedure: In pricing procedure account keys have not been maintained because there is not gl account upadation during billing for free of charge delivery.
Thanks & Regards,
ramesh

hi Gurpreet,
You can add values to that transient column programatically,either by getiing the row from the iterator and then row.setAttribute('Column_name','Value');
Or providing value to it in the SQL...

Ceartion of User Defined Field in EXCHANGE RATE AND INDEXES

Hi Experts,
I want to create User Defined Field in EXCHANGE RATE AND INDEXES.But while creating the UDF from User Defined Field-Management unable to find the table for it.Write now My Client are using SAP B1 2007 Ptach-08.Is there any way out to create user defined field in EXCHANGE RATE AND INDEXES.
Plz help me out on this issue.
with regards,
Pankaj K and Kamlesh N

Pankaj,
When you do the Manage User Fields area to define a UDF, all the possible areas where UDF's can be created in B1 is listed. You would be able to create UDF's only on these.
Suda

Okay so i had an iphone 5. I backed it up on icloud. Then i got the new iphone 5s i restored ot from icloud from my previous iphone 5. Now everything works find execept now the games are slowy and drops the frame rate and look choppy. Please help.

Okay so i had an iphone 5. I backed it up on icloud. Then i got the new iphone 5s i restored ot from icloud from my previous iphone 5. Now everything works find execept now the games are slowy and drops the frame rate and look choppy. Then i restarted my iphone 5s as a new device downloaded the same apps even the ones optimized for ios 7 and the games still lag. And i just got my iphone 5s replace. The funny thing is. While im playing games and their running choppy and slow and if i take a snap shot inside the phone. They run smooth and HD but just for a few seconds and boom they go back to slow and choppy. Is it the ios 7 or the iphone 5s it self? Like i said this is my replacement iphone 5s because the other 5s did the same thing. And it was running slowly.

As far as I know you can't delete the primary email address for an iCloud account. It's assigned when the account is created. But your neighbor wouldn't have been able to get into your iCloud account without your Apple ID and password. Are you sure the account wasn't still on your phone when you gave it to him?
You could migrate a copy of your data to a new iCloud account but I would still be concerned that someone else was using my old account, which presumably still has your data in it.
I'm fairly certain that you're going to have to have iCloud support help you sort this one out as they may have the ability to make changes to an existing account that users can't. Make an appointment with the genius bar at a nearby Apple store and have them take a look at it. If necessary, they should be able to contact iCloud support for you.

Resident rates and School District rates

Similar Messages

Maybe you are looking for