Resizable and drag & drop window

Hi!
I need to build a window with title bar and close button to
display an internal movieclip (mc is in the same movie). Window
must be custom resizable and drag & drop. I don' t want to use
window component. Please, help me. Thanks in advance...

Here.
You can work out the rest of the kinks. Good Luck.

Similar Messages

Copy/paste and drag/drop not working in Mt. Lion

After two weeks of searching, I can not find the hangup which is causing my iMac 27" 10.8 to stop copy/paste and drag/drop following successfully doing the same shortly after startup. In Safe Mode, it doesn't happen, so I'm wondering how to track down this problem (extension?). I have to restart in order to get it functioning again after a short time of working. There has to be some kind of timing, like a program installed with a time limit which probably was forgotten in Lion and then reared its ugly head in Mt. Lion. Any suggestions for tracking this puppy? Or is there a program I could buy to do so?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

I can no longer click and drag Safari window to the other desktop.

I've tried merging all windows and minimizing that single window, then going to the other desktop to open up the window. That doesn't work--it just opens on the original desktop.
When double-clicking on the Safari icon in the dock, the options for desktop appear (none, this desktop, and all desktops). By clicking on all desktops I am able to go to the other desktop and see my Safari window there, then I can change the option to none again.
This is not how it worked before. I'm supposed to be able to click and drag the window to the other desktop.
Any ideas?
Update:
I pulled one Safari tab out to create a separate window, opened Mission Control, then clicked on the Safari window and dragged it to the small image of the other desktop.
The window stayed in the other desktop and now the function of dragging Safari windows to other desktops has returned.
Message was edited by: CuriousKathy

Thanks! I was having the same problem. This resolved it for me.

On OSX Lion i used to drag the window to the top of the screen and get maximise, and drag the window right or left to show the both beside each other just like windows 7, How to do it on Mountain lion ?

On OSX Lion i used to drag the window to the top of the screen and get it maximise, and drag the window right or left to show the both beside each other just like windows 7, How to do it on Mountain lion ?

That has never been a feature of Mac OS X, but I believe there was some kind of third-party software that could add that capability. i don't recall what its name is, but you must have had that installed, and it either isn't installed anymore (perhaps removed as incompatible?) or is not working properly in Mountain Lion.

Drill Down Reports and Drag & Drop capability Tool for Developer2000

I am currently doing my development in Developer2000 rel. 2.0.
I have seen many tools for VB which provide the facility for Drill Down reporting and drag & drop option in reporting, but unable to find any tool for developer2000. I wonder if anyone can guide me about any tool for developer2000 which can provide these facilities in reporting and forms.......
Qamar Bilal

you can use the mouse triggers to do drag and drop.
you have mouse-move and mouse-enter etc...
what do you mean by drill down?
you can do drill down reporting in reports by using srw.run_report built in and you can also use oracle discoverer.

Type Tool does not select type by double clicking or click and drag. (Windows CS 5 V15.1)

Hi,
My Type Tool does not select type by double clicking or click and drag. (Windows CS 5 V15.1). This is what I have tried so far and the problem still exists.
Check preferences for "Text": "Select text-object by path only" should be off. Checked. It was off. Didn't fix it.
Check the toggle for Show/Hide Edges in the View menu. Cmd(Ctrl)-H. Checked. Edges Showing. Didn't fix it.
Trashed my Prefeerences. Didn't fix it.
Any other suggestions out there?
Thank you!!!

I figured it out! I feel pretty silly, but I will share this in hopes of helping the next person :/ Here goes. Don;t laugh to hard!
It was the leading! The space between the two lines of text was less than half of the point size of the actual text. So it looked like two lines but there was actually 3.
Geeze, I'm embarrassed! Thank you for suggesting that I may not need to recreate the entire document, but start with the text, input manually again (even on a new layer, to match the original), which lead to a fix!
Thank you!!!

Dynamic create elements and drag drop

Hi,
Where can I find an example of dynamic creating swing elements
and drag-drop them?
Thanks,
Luiz Fernando

totalnewby wrote:
The following procedure doesn't compile if sequence SEQ_ADR does not exist before compilation. I had to create the sequence manually before being able to compile this procedure. How can I avoid this manual generation?
PROCEDURE A_270(proc_id number) IS
seq_cnt number;
curr_max number;
BEGIN
select count(*) into seq_cnt from user_sequences where sequence_name='SEQ_ADR';
if seq_cnt > 0 then
execute immediate 'drop sequence SEQ_ADR';
end if;
select max(id)+1 into curr_max from adress;
execute immediate 'create sequence SEQ_ADR start with '||curr_max||'';
insert into adress(ID,
IMPORTED_DT
select
SEQ_ADR.nextval ID,
sysdate IMPORTED_DT
from new_adress;
END;Edited by: totalnewby on Aug 23, 2012 6:41 AMEssentially the same question asked by 'gogol' two days ago at creating and using sequence inside a proc
It was a bad idea then. It is a bad idea now.

UI enhancements and Drag&Drop

I understand the need and will to create UI environment from scratch which is independent from the OS usual controls and pretty too. But with this approach it's often that something that the users of specific OS are taking for granted isn't there.
There are problems with current scrolling behavior in grid view (different from thumbnail generation problems). The scrolling seems too slow and not entirely smooth. Apart from working on solution for that (which I feel is needed) using Windows convention of right clicking on slider area and have the options to scroll to the start/end and scroll where clicked would ease _some_ frustration when browsing through the library. I often use this in both PSE Organizer and Bridge.
Of course Mac people might say: hey, I don't want that Win stuff in! To this my answer would be: I would like _every_ useful Mac stuff in!
I would also like full drag&drop capability in LR.
m.

vatolin wrote:
V.K. wrote:
no. smart folders are … saved searches.
That's understood. Is there any other approach to catch my concern to collect e-mails in one place without move them out of their original place and without to duplicate them?
no, it has to be a smart folder to do something like that.
Otherwise I think I'll set a keyword in MailTags and create a smart folder that catches all items including the keyword.
That's probably your best bet.
TIA and kind regards, Friedrich

Quality differences between "Export Using Compressor..." and Drag & Drop

There are quite a few people out there discussing the 24p workflow for the new Canon HV20 (on hv20.com, dvinfo.net, etc.). The HV20 can shoot 24 progressive frames/sec, but stores them as 29.97 interlaced HDV on tape, with an arbitrary cadence.
One of the better workflows is to capture into FCP using HDV over Firewire, and use Compressor to extract the progressive frames from the interlaced. Its Reverse Telecine seems to automatically figure out the cadence. I've been testing this using the "Other Workflows > Apple Codecs > Apple ProRes 422 for Progressive material (HQ)" preset, with the following modifications, Frame Controls: On, Deinterlace: Reverse Telecine, Frame Size: 1920x1080.
That's just background.
The problem is this. If I export the HDV clip from FCP, "Export > Using Compressor...", the resulting 24p footage is extremely high quality. However, if I drag & drop the HDV clip directly into Compressor, or set up a Compressor droplet (arguably more straightforward for batch conversions), the resulting footage has obvious resizing artifacts (jaggies).
Obviously, I'm keeping everything consistent setting-wise, and have thoroughly examined the resulting .movs. The only difference is the actual image quality.
Anyone seen anything like this?
I'm less concerned about this specific workflow than I am about Compressor producing non-identical results from identical footage with the same settings, dependent on your chosen workflow...
Mac OS X (10.4.10)

What I need to know if it is a dramatic different in quality that I should use DVD Pro instead of iDVD.
If you want a DRAMATIC improvement in quality, shoot sharp, high quality content like Hollywood (usually on film) and have it compressed by high quality hardware encoders.
There is a good reason Hollywood DVDs look better than iDVD/DVD Studio Pro DVDs.
F Shippey

Drag&Drop & Windows 7

Hi,
I'm testing Flex Builder (last release) on Windows 7 RC1, I have troubles with the native drag&drop functionality of an AIR application inside the development environment, the d&d doesn't works while testing the application with 'run' and 'debug' options inside the builder, d&d actually works if I deploy application and test it with the 'standard' AIR framework.... same code works on Vista and so on on the fly...
I have checked the forum and found another user having the same 'issue', perhaps some OS settings or security levels to grant to flex builder?
I know that W7 is not yet a RTM and is not supported so far, btw any suggestion is welcome.
TY.

Did you try a clean boot?
And does this works in safe mode or only a problem in normal Windows Mode?
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.
Thank you for your reply!
The answer to your question is Yes, I tried it in Safe Mode and it does NOT work there either. (Please note that I made sure to say this in my OP, where I wrote: "The problem
DOES occur even in Clean Boot and Safe Mode!").
I hope you can help!

Reinstalling CS2, and dragging/dropping files does not work

I have Photoshop CS2. Or at least I
had it. I had updated my operating system to Tiger, and it just caused a bunch of files to change, nothing really bad. It gave me an error message upon opening photoshop that "files necessary for running Photoshop were missing from the Application Support folder"
So I read the advice on this FAQ:
Scott Weichert, "Double-click/Drag-&-drop Photoshop files opens application but not file or I get a message saying that some files in Application Support are missing and I have to reinstall. (Photoshop CS/CS2/CS3)" #, 29 Dec 2003 2:45 pm
And did what it said. I trashed the CS2 folder, and now when I try to re-install it my serial number won't work. Is my $400 serial number now permanently registered on a nonexistent platform?
As an active photographer and graphic artist, I need Photoshop constantly. So any advice would be greatly appreciated as soon as possible. Thank you.

The problem you got into is a known problem after updating to Tiger. It is a small 4K file that gets trashed with the update. It is called the Adobe Unit Types. Both Photoshop and Photoshop Elements need this file to function.
One way to get it back is to reinstall Photoshop, the other is to add this file again.
You can get the file from here http://www.dd.se/Tips/bildbehandling/downloads/AdobeUnitTypes.zip
It is only 3,7 KB big.
You put the file you download here:
[hard disk] /Library/ScriptingAdditions. If you don't have a Scripting Additions folder, you create it.
As you trashed Photoshop, you need to completely deinstall it to be able to reinstall it.

Adding resize handles to a rectangle to resize and drag in a canvas

Hi
I am having difficulty for the last couple days in getting a rectangle in java 2d to addshape handles to the corners which will allow me to resized the rectangle and then and dragged within the canvas using these handles. Also to get the shape on the canvas I will be clicking a button for the shape Rectangle to appear on the canvas in the first instance. I do not understand where I am going wrong.
I am using the format of g2D.drawRect(10,10,50,50 ) for example to demonstrate my shape.
Thanks in advance

Search for
draggable tjacobs01
and
resizeable tjacobs01
these are my classes for doing what you're talking about. They work on components so you'll either have to switch your rectangles to components or adapt this code to non-component objects. It becomes more tricky because of the mouselistening.
usage:
Component c = ...
new Draggable(c);
new Resizeable(c);
parent.add(c);

Reader X and Drag & Drop

Hi guys,
you may have noticed, Drag & Drop is not longer available since Reader X with enabled Protected Mode. This has become painful news for our accounting personnel. They used Drag and Drop to put billing information into our DMS. Is there a way to enable this feature for a specific website with some kind of whitelist or REG key or do we have to disable Protected Mode in general ?
Thanks for your advice...

When the protection mode is enabled this is not possible.

Backup/restore and drag/drop .emlx back into mail......

bit of a curly one,
Okay, I backed up a user's folder full of emails onto disc, so I could delete it (As it's taking up heaps on the server... they're using imap)
anyway...is there any way to drag/drop the .emlx files back into say a folder "on the mac" so that it can be visible on the hard disk in Mail?

First of all, you should realize that you’ve been making backups of data stored locally on disk, not of the messages stored on the server. Hence, in general, those backups may or may not allow you to restore your mail depending on a number of things, such as the account settings and the format used by the mail client to cache messages locally (if any).
If Preferences > Accounts > Advanced > Keep copies of messages for offline viewing is set to All messages and their attachments (the default setting), then Mail 2.x maintains a local copy of server-stored mailboxes using the exact same format it uses for locally stored mailboxes, except the suffix of the mailbox folder in the filesystem is .imapmbox instead of .mbox.
You cannot import *.imapmbox mailboxes directly into Mail because when you do File > Import Mailboxes and choose Mail for Mac OS X as the data format, Mail looks for *.mbox folders only, but if Keep copies of messages for offline viewing was indeed set to All messages and their attachments when the backup of those mailboxes was made, you can easily overcome that limitation by just changing the suffix to .mbox:
1. Copy the entire ~/Library/Mail/IMAP-username@mailserver account folder from the backup to the Desktop.
2. Change the .imapmbox suffix of the folders within the account folder on the Desktop to .mbox.
3. In Mail, do File > Import Mailboxes, choose Mail for Mac OS X as the data format, and follow the instructions to import the copy of the account folder that’s on the Desktop.

Smart folders and drag&drop

Morning.
Is there a way to create a smart folder and then drag&drop some emails into this smart folder, so that I can find in this folder all emails I've collected in it without that these emails are moved out of their respective original mailbox?
This would be very usefull to merge emails without a special evident unique attribute but with similarity given by the user.
Do you know, what I mean?
TIA and kind regards, Friedrich

vatolin wrote:
V.K. wrote:
no. smart folders are … saved searches.
That's understood. Is there any other approach to catch my concern to collect e-mails in one place without move them out of their original place and without to duplicate them?
no, it has to be a smart folder to do something like that.
Otherwise I think I'll set a keyword in MailTags and create a smart folder that catches all items including the keyword.
That's probably your best bet.
TIA and kind regards, Friedrich

Resizable and drag & drop window

Similar Messages

Maybe you are looking for