Resize Firefox 26 to a width of less than 400px

Since the upgrade to Firefox 26.0, it seems to be no longer possible to resize a window to be smaller than a width of approx. ~400px. I run a custom web-application in its own Firefox instance, which requires far less horizontal space, and therefore would like to be able to resize the window to an appropriate size. In the previous version (Firefox 25, I guess) this was no problem. Is there any possibility to regain this ability in Firefox 26+?

Is it a bug? If not FF is useless for developping responsive webpages now.

Similar Messages

DAQMx has no output when the pulse width is less than 0.1sec

Hi,
    I am developing a application to generate square wave(voltage) and out put from a DAQMx card (PCI-6723 - 32 point analog in/out). I attache a simplified code (labview8.5) I wish somebody can help me to figure out what is the problem
    When I set pulse width longer than 0.1 sec. everything works fine. If I set the pulse width less than 0.1 sec, the output from DAQ eithet gets nothing or incorrect(I used a Osclliscope to monitor the DAQ output), although my labview monitor showed correct output.   I wonder if it is a sampling issue of the DAQ card.
     Thanks
    Guang
Attachments:
test21.vi ‏69 KB

I think one or two things could be causing the problem.
1. Your DAQmx write is set for 1 sample. I don't know how that dynamic signal type works with such a setting. Perhaps it is just putting out the first sample of the signal that is generated.
2. The math for the frequency of the square wave does not make sense. You are adding a pulse delay with the pulse period, then inverting it to get the frequency. So a 1 second delay with 1 second pulse is a 1/2 Hz wave. A 4 second delay with a 2 second pulse would be a 1/6 Hz wave. That doesn't make sense to me.
I would recommend building your own waveform or array and not using the express VI. If you have a 1000 Hz frequency established let's say, build a 1000 element array. For a .1 second pulse, set replace 100 of those elements with a 100 element array of the voltage value you want. You can index it wherever you want in the array to account for whatever delay you want. If you want a 1 msec pulse, then just replace a single element of that array wherever you want.

Chart Lines Dissapearing When Line Width Less than .38pt

I have a Line Chart with about 70 different series. As you can imagine, it gets pretty crowded. In SQL server 2005, I was able to set the line width to .25pt, but when I try to do the same in 2012, the lines disappear! The smallest line width that I can
get to show up is .38.....If anyone out there knows why this happens, I would really appreciate a hint. I've tried everything from messing with the markers to the empty point settings...
Thanks

Hi Scott,
I am able to reproduce your scenario that when the line width with less than or equal to 0.375pt, they will all disappear in the line chart in my test environment. Based on my research, it seems to be the particular render extensions which cannot display
the narrow lines in line chart. However, if we export the report into PDF, the all lines which narrow than 0.375pt will appear in the report. I think this is by design.
I would suggest you submitting a wish at
https://connect.microsoft.com/SQLServer/Feedback.
Connect site is a connection point between you and Microsoft, and ultimately the larger community. Your feedback enables Microsoft to make software and services the best that they can be, and you can learn about and contribute to exciting projects.
Thank you for your understanding.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

EPM 2013 Report is displayed as cut off and shows less than half the width of the report in IE 10 and IE 9.

EPM 2013 Report is displayed as cut off and shows less than half the width of the report in IE 10 and IE 9. This issue occurs for some users only.I tried the same url in google chrome and is working fine.
Can you please help.
Please find the attached screenshot.

Hi BJ1986,
According to your description, I think this issue is caused by the IE browser that runs the report. To trouble shoot this issue, I suggest that we can try to clear internet temporary files, cookies and others in IE browser. And also add this site
as a trusted site in IE browser to check this issue again.
If this issue is still existed, it can also be occurred due to the setting or third party add-ons of Internet Explorer (IE). In this scenario, you can try to run IE in compatibility mode to check the issue again. Or I suggest that you can refer to the
steps below to troubleshoot the issue:
Click Tools -> Internet options.
Switch to the Security tab, click Local intranet, and then select Default level.
Switch to the Advanced tab, and click Restore advanced settings.
Temporarily disable third party add-ons. For detailed steps, please see the link below:
http://windows.microsoft.com/en-IN/internet-explorer/manage-add-ons#ie
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Firefox freezes when I open it after less than a minute of searching. It freezes regardless of the website I'm on. I've tried reinstalling it several times and have even tried a clean reinstall but it didn't work.

When I open it, Firefox freezes after less than a minute of use. After waiting a few minutes, it unfreezes but then freezes again a few seconds later. This happens regardless of the website I'm on. I've tried uninstalling and reinstalling it and the problem didn't go away. I've even tried a clean reinstallation but it didn't work. This only happens on Firefox. IE and Safari work fine.

-Plug your MacBook into a power source.
-Click on the Apple menu and select "System Preferences".
-Click on the "Energy Saver" icon.
-Click on the "Options" tab.
-Uncheck the box labeled "Automatically reduce brightness of display before display sleep"
-At the top, next to "Settings for:", select "Battery" from the drop down menu.
-Uncheck the box labeled "Automatically reduce brightness of display before display sleep"

I installed a few themes on my firefox , when i open a blank page it is supposed to show a skin but the skin disapears in less than a second, What shall be done to have the skin remain on the blan page ?

I installed a few themes on my firefox , when i open a blank page it is supposed to show a skin but the skin disapears in less than a second, What shall be done to have the skin remain on the blan page ?

That's probably a bookmark you have saved in Favorites.
Tap bookmark icon>Favorites>Edit>Delete the bookmark

Firefox Crashes in less than 5 seconds after opening it, randomly.

Here's my problem.
When I load firefox, 3 to 4 times in a row it will open, and then simply vanish in less than 5 seconds. Then the next time I try to open it - It works. WTF?
It won't even give me a Crash screen, It just vanishes.
Sometimes even, It just hangs at the homepage, to which I have to C.A.D. it.
This is happening all the time and its really getting annoying. I open a page, it crashes, repeat, repeat, repeat, and then success.
I am running a freshly installed Windows XP home 32bit, with all drivers and updates installed, blah blah blah...
Using Firefox 4.0.1
Things i have tried:
Opening multiple Firefox windows at once from the desktop, and regardless of how many, it crashes.
Changed my home page to alternative sites ( Google, Youtube, Hotmail etc.)
Made sure firfox was up to date, including all add-ons.
Tried disabling addons
Tried running firefox in safemode.
Tried running firefox in safemode, with add-ons disabled.
Re-installing firefox, with and without updates.
Tried it on a friends computer, clean install without add-ons and it worked.
Hitting my computer ( lol, j/k )
Im quite fed up with this. I've never had this problem with any versions previous to 4. Yes, that means V4 did this to me as well.
The times I can get Firefox started, I have no problems at all, Its smooth sailing.
Everything else on my computer works great, so I'm sure it is just firefox.
Anyone have any ideas?

Firefox is likely to be [[firefox hangs|hanging]] rather than crashing, which explains why you get no crash reports.
The problem is likely to reside in your [[profiles|profile]] which is why reinstalls and [[safe mode]] do not help, but using a friends computer's Firefox works.<br/>(using a new clean profile would also be expected to work but may not be the simplest thing for you to do<br/> - and you could loose access to some data)
The ''"CAD"'' approach in XP will start task Manager that may be used to kill the process that is a one off solution to [[Firefox is already running but is not responding]] you will need to follow up to figure out why it is hanging repeatedly.
Follow the links I have posted, and further links in those articles if necessary, the articles should explain the problem and how to resolve it better that I could. Post back with how you get on.
If it turns out it is crashing you will need to look at [[Firefox crashes]] and follow up for a crash signature.
Good luck.

Just finished update. While in the Tips, why did it tell me I have an old version? Hey there! Looks like you're using an old version of Firefox. Don't miss out on the latest technology & security features. Get the free upgrade in less than a minute.

The top of the screen has an owl like icon & then the following message:
Hey there! Looks like you’re using an old version of Firefox.
Don’t miss out on the latest technology & security features.
Get the free upgrade in less than a minute.

Dear Colbabomb; thankyou for your links.
So far, I looked at your first solution, Revo Uninstaller and it gives you a 30 free trial. Ergo, it will eventually cost money so I'm leery of using those kinds of programs in general, meaning most "free trials" have unwanted strings attached and often are big probs to get rid of later. Perhaps you can assure me that it is easy and very user friendly, before I proceed. And I already ran malwarebytes and it found nothing tho the program still can't be uninstalled. I downloaded Adw Cleaner and during the install, my Norton's security popped up and warned that there were (low risk) threats with two of their "other offers" and i hadn't even actually clicked to agree either of them. Nonetheless, Norton warned me against the "lyrics finder" and "deal ply." In fact, there was a box already with an x in it, saying that you are accepting deal ply if you x on "next." Well, except I unchecked that box before clicking on next, yet when it went to fully install, it still showed that it was adding itself; so, just before the install was 100% completed, I had to abort the whole thing. I really do hope your other suggestions are programs that you personally know that they don't try and trick you. But right now, I would not suggest Adw Cleaner to anyone. I even read the fine print about what they will try and install and how to decline and it still tried sticking stuff on that i believed I had declined. Anyways, i have to leave now, shall pick up later this evening, if my pc is still functioning.

The height of mx:RichTextEditor in VDividedBox cannot be reduced to less than 200.

I'm using <mx:VDividedBox >, in which there are a mx:RichTextEditor and mx:Image, as in the code below.
When I dragged the divider of the VDividedBox to resize the heights of the Image and RichTextEditor, I found that the height of the
RichTextEditor cannot be reduced to less than 200. Is this a bug?
I replaced RichTextEditor with TextArea, then divider of VDividedBox works fine. I use Flash Builder 4.5. Please try the following code, and
post you result here. Let's help Adobe to make Flex better.
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
      xmlns:s="library://ns.adobe.com/flex/spark"
      xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600">
<fx:Script><![CDATA[
import mx.controls.Alert;
[Bindable] public var imageSrc:String = "http://cseligman.com/text/sky/perigeeapogee.jpg";
private function showHeight():void {
   Alert.show(this.rte.height.toString());
]]></fx:Script>
<mx:VDividedBox width="100%" height="100%" >
   <mx:Image id="image_edit" source="{this.imageSrc}" scaleContent="true"
       horizontalAlign="center" verticalAlign="bottom" width="100%" height="100%"
       />
   <mx:RichTextEditor id="rte"
       width="100%"
       text="The Moon.... Click me to show my height." click="showHeight()"/>
</mx:VDividedBox>
</s:Application>

try setting minHeight of the RTE to 0

How do I reduce a picture to less than 50kb and less than 500 by 500 ratio?

I'm trying to upload pictures to a Web site that requires the size of the picture to be no larger than 50kb, as well as less than 500 by
500.
I've tried cropping and exporting. I can get the aspect to less than
500 by 500, but then the kb size gets larger.
Thanks,
Paul

Paul,
iPhoto won't downsize your photos, since your original would lose much quality if you could do that. Just crop to best suit the aesthetics of the photo. Then to resize for the website, do File > Export > File Export to a Desktop folder. Instead of "full size" select "scale photos no larger than" and type 500 pixels in one of the dimension boxes. (Choose the larger dimension - width for landscape photos, or height for portrait.) iPhoto will automatically constrain the proportions and enter the second amount. Only the exported copies will be resized. Upload those from the Desktop to the website, then trash when finished.
Regards.

Spark list horizontal scroller doesn't actualize when rows is set lesser than list container

Hello,
The size of the Image control is set larger than that of its parent Group container. By default, the child extends past the boundaries of the parent container. Rather than allow the child to extend past the boundaries of the parent container, the Scroller specifies to clip the child to the boundaries and display scroll bars.
In the spark list, when I change the list dataProvider and the size of the Image control is set lesser than that of its parent Group container, the horizontal scroller doesn't actualize.
thanks.


<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/mx" applicationComplete="comp()" width="260" height="400">
    <fx:Script>
        <![CDATA[
    import mx.collections.*;
    public var dpArray:Array;
    [Bindable]
    public var dpCol:ArrayCollection;
    public function handleClick():void {
        dpCol.removeAll();
        dpCol.addItem({ label:"spark test" });
        dpCol.addItem({ label:"spark text" });
    public function comp():void {
        dpCol = new ArrayCollection(dpArray);
        dpCol.addItem({ label:"spark list horizontal scroller doesn't actualize when rows is set lesser than list container" });
        dpCol.addItem({ label:"spark test" });
        dpCol.addItem({ label:"spark text" });
         ]]>
    </fx:Script>
    <s:Panel title="List">
        <s:VGroup left="20" right="20" top="20" bottom="20">
            <s:List width="200" id="lis" dataProvider="{dpCol}" height="120"/>
            <s:Button id="button1" label="Click here!" width="100" fontSize="12" click="handleClick();"/>
        </s:VGroup>
    </s:Panel>
</s:Application>

Top N Chart where there are less than N series'

Post Author: acarey
CA Forum: Charts and Graphs
Hi guys,
I'm using CR XI R2.
I've got a report with a bar chart displaying the top 10 delays for peices of equipment. It works great but I have a display issue when there are less than 10 delays.
For instance, on my top 10 chart for a certain day, there are only 2 delays and it stretches the columns to take up the entire chart. I would like them to display as if there were 10 delays, ie have a fixed width.
Is there a way to enforce this?

Post Author: Dan3D
CA Forum: Charts and Graphs
Are you doing a horizontal bar chart or a vertical column chart?

Conversion Failure when combining less than 12 files

Cleared cache on Firefox. Files are less than 300kb each.
Any ideas?

Hi Stephen Howard,
No, nothing as such!!
Firefox is compatible with our products and services,
I would recommend you to update your Firefox browser to the latest version ( If it isn't Updated) and then Try Clearing Cache and History of your Firefox browser, Later try Converting that file again using Firefox.
Please let me know if you face any Problem.
Hope that helps
Regards,
Rahul Tyagi

Emails sent to me are sometime returned to the sender with the message "Inbox full" even though I have maybe less than 100 emails in the Inbox and I regularly compact them. How can I increase the storage space?

Question
Emails sent to me are sometime returned to the sender with the message "Inbox full" even though I have maybe less than 100 emails in the Inbox and I regularly compact them. I delete emails from the Inbox and the Sent and Trash boxes to overcome this. How can I increase the storage space to stop this happening?

Hi terrybohle1938,
Firefox is a web browser. It provides access to online content. Things like your email are handled by the content provider. Who is your email provider? You'll have better luck consulting their documentation.
That being said, deleting only email is a great way to free up space. Another option would be to purchase a "Premium" account if your email provider offers this service. Many times more storage space is offered as part of paid subscription.
Hopefully this helps!

Just Curious: Cropping Display for "Less than Ideal" Resolutions?

Hey there, its me again. This isn't a "life or death" type of thing, more just a "curiosity"; 'cuz I remember back when I had my classic hp zt1250, whenever the resolution was less than its full capabilities (1024X768), it would resize the input to the correct size, so for example if you were say, installing Windows (where the installer is only 640X480 or 800X600 or somethin' like that), instead of stretching it to the full screen and making it look crappy, it would box it in so that it would only take up those 800X600 or 640X480 pixels of the screen (in the end, you'd see a black box around the part of the screen where there was an image). On a laptop with such an awkward aspect ratio, it bugs me how the "Starting Windows" animation is stretched out (trivial, I know) because it is only in 1024X769 instead of the machine's native 1280X800 Resolution, so I was wondering if this is corrected in a BIOS update somewhere or if it was "Just another one of those oversights" on these fancy "Newish" laptops.
Thanks.
Dr Robinson

yigit wrote:
have you read installation instructions?
you may need to use dos to flash bios upgrade.
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-68504
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67975
please post type and windows that you are using ( 32/64 bit xp/vista/7 )
Maybe it was just me, but I couldn't find anything in the instructions for updating outside of WinPhlash.
?? http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/68et37ww.txt
It does say something about not functioning in 64 Bit Windows, so that may be our problem.
Dr Robinson

Resize Firefox 26 to a width of less than 400px

Similar Messages

Maybe you are looking for