Resize Track List and Windows

The minimum size of the track list is way to large. I takes up about two inches. I only need 1/2 inch to see the track names. I'd also like to eliminate the transport in some (all?) arrange windows. We're giving up too much monitor space for this stuff. Also, my screensets do not match the ones from v.7. Now i notice that the imported screens don't size to my monitor correctly. The event list is way off my monitor to the right, and needs to be manually resized and resaved.

I want to make a play list of certain folder contents, but when I import them it goes into the balck hole of a library and I find it hard to have to sort through everything to put it ina play list. I just want to add say 10 tracks from a folder in to a play list so I can listen to just those tracks.
Why are you concerned with where the tracks are?
Let iTunes worry about that. Just select the tracks you want, Right click and select Add to playlist and select the playlist you want.
Second I make my own cd's and wonder how do you get the media players to Id your disc so it grabs your info off the net.
Burn the CD on your computer. Since it's an audio CD, it will not contain any info. However, the track info will be remembered from iTunes. In iTunes, select the new CD, then menu Advanced -> Submit CD track names.
This will send the info to the Gracenote CDDB.
When you insert the Cd on another conmputer and select Advanced -> Get CD track names, it should retrieve the info.

Similar Messages

Track List and Grouped Album Art not right

I purchased a 2 disc album from iTunes. I did nothing but click buy. I have not changed any default settings. When viewed under "+view grouped with artwork+", most tracks are separate instead of being grouped together under one album image. There are a few that are grouped together randomly. For example: +track 1 of 16 on Disc 1+ is with +track 1 of 15 on disc 2+, or +tracks 3, 4, 5, & 10 of 15 Disc 2+ are grouped together.
Another problem is with the order of the tracks. When I downloaded to my iPhone, the tracks are out of order. For example: +#16 of disc 2 is now #1+, +#1 of disc 1 is now #17 of 31+.
Finally, The artwork downloaded to my iPhone for most, _but not all_ of the tracks.
What on earth am I doing wrong!?!?
Thanks for your help

I've since started over from scratch with a 'clean' phone. Formatted the SD Card, created Music & Videos folders & copied all respective files using a card reader with the PC.
SD Card installed in the phone & when switched on ALL tracks appear in respective artist/album location - only once.
Connecting the phone to the PC to add new albums results in all new albums being detected once BUT with NO artwork (cover image). Deleting an album results in that being deleted the list available in the 'Music+Videos' App. Copying the album back results in that being detected BUT with no artwork.
Trawling through the web, I've discovered a brilliant app MPAtool which magically restores the missing artwork. It's not 100% effective as it doesn't necessarily locate all artwork, but these can be found manually either by , locating them in Music or, if that also fails, copy the artwork to 'camera roll' & point MPAtool to that location.
So far, I've had no more duplications & all albums have their respective artwork.
It is also important to ensure that the MP3 tag is 100% correct. Using Winamp to rip my CDs to MP3, the CDDB imports the information for artist, album, track etc & populates all the necessary locations without error. However, some earlier MP3 tracks that I have had had erroneous entries which confuse the Windows 8 software. Also when ripping albums with more than 1 CD, Winamp identified each CD as 1/2 & 2/2 with track numbers 1 - n on each rip which Windows 8 interprets as 2 albums. I prefer to see all CDs in an album as one & use Tag & Rename to ensure at references to 1/2 & 2/2 are removed & track numbers are changed accordingly.

User tracking utilities and windows 7 compatibility

Does anyone knows if user tracking utilies is compatible with windows7 (windows 7 professionnal 64 bits) I tried to install it and "user search band" doesn't show in the toolbar menu.
Thanks in advance

First, I think you're confusing UTLite with the User Tracking Utility. The former is for sending username information to UT while the latter actually sits in the task bar, and allows you to do searches. UTU 2.0 was just released, but it only supports up to Windows Vista clients. Windows 7 has not been tested yet, and thus is not officially supported.

Questions about track listing and album

I have burnt my collection of an audio drama I have on CD and transferred them to the Creative Vision M. The problem is the tracks play in alphabetical order, not in the numerical order (as in #1, 2, 3, etc.)
I've gone and used MP3 Tag Editor to check the tracks 3 times. On my Archos, the tracks play according to order by #1(which happens to be the story order). How can I fix this order?
Also, album isn't displayed despite the fact they've been attached using MP3 Tag Editor. The art is displayed on my Zune and the Archos but not on the Vision M.
Help :robotsad:

Eccentric_Hero wrote:
In fact, now that I think about it... I didn't have to edit anything when I first uploaded them to the Archos.Message Edited by Eccentric_Hero on 04-29-2008 06:27 PM
It could have something to do with the file system that was used... my old Zen MuVO played whatever I added in the order it was added because the file system was a external flash drive system. The Zune and the Zen both may use a different file system that plays and sort the tracks based on certain tag info. I know that from what I've read on here that the file system that the Zen uses is the main reason why SD card integration is impossible.
Hope this helps,
Frank.

Hi - Re Keynote I'm trying to figure out how to create a music album on USB flash drive. What I want is a background picture with 'click-buttons' to play each track listed, also similar for embedded videos and photos etc. Is this possible with Keynote ?

Hi - Re Keynote I'm trying to figure out how to create a music album (as an artist) on USB flash drive, (accessible by both Mac and PC). What I want is a background picture with 'click-buttons' to play each track listed, and play in order (like a cd) - also similar for embedded videos and photos etc. This should all be on the one page.
Is this possible with Keynote, or any other software package for Mac (am using Macbook Pro) ?
Gav 88

Hi there,
Yikes, it sounds like you've been doing a lot of work on this project... Unfortunately, however, this isn't the Adobe Encore forum, but the Acrobat.com forum. While it seems like an exciting question, we're not able to address issues pertaining to other Adobe products and services. Here's a link to the Adobe Encore forum, where you're more likely to get help for this specific issue:
http://forums.adobe.com/community/encore
Sorry not to be of more specific help to you. Best of luck!
Kind regards,
Rebecca

FIREFOX 26 changed the 'post crash' page with the list of windows and pages. It was a real HTML page with links for each page. Now it isn't (and blows)

* You changed the page that comes up after a crash - the one which shows the windows and pages that were up before the
crash.
This used to be a real HTML page and it isn't any more. THis choice was pure isiocy consider how peopel used that page every day (try taking to your users for a change).
The pages listed on that 'post crash page' used to be actual LINKS (you could right click them &
manually open them in another tab - and most peope DID that every day). You could also (and I did this a lot) drag a second
copy of the page, into a new tab (to keep track of all the pages I had not wanted to open)
Now the pages are no longer links. You cannot right-click them.
The thing in the probser is no longer a page that I can drag into a new tab.
Roll the version back and throw this one in the bin...and have a good long talk with your developers about the definition of
'STUPIDITIY'
Then I try to type anything in the addres bar it is suppose to repoond with the history of old things I have types in the past, or
search for what I type (and in some cases I think it tyes to convert it intoa URL). However it no longer does any of these
things. When I type in the ADDRESS BAR ONLY, I do not get all of my letters to appear. I have to type into a notepad or
into the search and to copy and paste to go to a URL. Nothing that is typed into the address bad responds normally at all
anymore, and I am fairly certain there are no new addons on this machine at all. It does not matter which things I disable. It
still does this. W of course points the finger back at a change to FIREFOX. I wich I could just sitct with one stable release
forever but the MOZILLA folk thing it is best to force peopel awy from a working broswer release to a horrible one (due to it
being out of date).
FIREFOX 26.0 has 'issues' (ie new *features*/bugs)
1) History is no longer accurate. My Proof? This machine is the primary one for the entire family (the only PC working). It is
logged in with same user every time and never has its history cleared. It now January 7 so I ought to have a list of all of last
months browing available to me.
However, according to FIREFOX history, in all of December 2013, the entire family only went to 51 primary URL's. None of
the official TV sites I use to get episodes are listed. None of the official movie sites I use are listed. The primary URL for
ebay is not listed. Only 1 out of our 4 weather sites that I use (at least once a week) are listed. Only 1 of our 3 FINANCE
sites is listed. There ought to be several; hundred root URLs listed.
Please fix history as this change seriously "blows greasy chunks"
PROBLEM (a stupid change in the new FIREFOX version)
FOr a long time, after a crash you got a useful page (a real HTML page) which gave you a list of all of your last sessions
'winwos and tabs' that were open when the browser crashed. there were certain ways of using this page that are no longer
able to be done.
The old method was wonderful as it had this behavior :
*** The old method for displaying your 'Recovered Tabs' allowed you to :
a) right click an individual item and open it in a tab without getting rid of that lovely window of your previous session of
'recovered windows and tabs '.
2) drag the URL for the entire window of 'recovered windows and tabs ' to a new tab (to make a second copy) so that you
could select just a few of them to open as a group, and stil have the old list handy.
You can no longer do either of these things. The 'recovered windows and tabs ' page no longer has links in it and can no longer be dragged, so you cant select a few of them to use, and keep the rest around for later. NOW - once you choose which pages to open the window is gone forever (can can't get a second copy).
People used to make a copy of the page for later use (with a drag)
we also used to open pages with a right click (which no longer functions
This new method seriously blows big greasy chunks. A parge loss in function has occurred.
Put things back as they were. 26 is full of terrible changes that NOBODY likes. It also has a lot of bugs (history is not reliable at all)

(1) Firefox's built-in post-crash page has not been a real HTML page for a long time (for example, from the time of Firefox 22, see: [https://support.mozilla.org/en-US/questions/968212 Want to save LOTS of versions of "Restore Session.xht" from the "oops ..." page for later use]). If you had this working differently with Firefox 25, that might have been created by an extension.
You can check to see whether extensions are disabled or need an update on the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions. The disabled extensions cluster toward the bottom of the list. To poll for updates, use the "gear" button above the list and choose Check for Updates.
If you used the Reset feature (or Firefox automatically did a reset due to some problem during upgrading), you will need to reinstall missing extensions. The reset feature creates a folder on the desktop named Old Firefox Data. Do you have that folder? There may be data you can recover from it.
(2) There are many ways for history to get cleared, both internal to Firefox and external. Could you double-check your Privacy settings?
orange Firefox button (or Tools menu) > Options > Privacy
* The "Firefox will" drop-down says Remember History: Firefox shouldn't be clearing history, but an add-on or external software could do it
* The "Firefox will" drop-down says Use custom settings for history: inspect the "Clear history when Firefox closes" setting to make Firefox isn't set to clear history. Also check your add-ons and consider external software.
Firefox normally accumulates months of history. However, some of Firefox's database sizes are based on disk space available. If your hard drive is very full, Firefox might reduce the amount of history stored.

CDs import OK to iTunes Windows but not to iTunes MacOS! I have had 3 successive audio CDs with the same problem. They have exactly 20 tracks each, and track 19 claims to be over 14 hours long, and track 20 over 1 hour long. Any clues?

I have an ageing (2006) iMac running OS 10.6.8 with an external LG CD/DVD writer (I've worn out the internal one). I am not sure whether this is an iTunes issue or a LG issue.
Incident 1: importing a CD with 71 short tracks via iTunes. Track 24 is listed as 25 seconds long, but (on the first attempt) only the first 10 seconds actually import. I spotted it immediately as it also blacked out the artwork and refused to let me paste the artwork back in. A second attempt at the import worked correctly. ** SOLVED AT 2ND ATTEMPT **
Incident 2: importing a CD with 20 tracks averaging a little over 3 minutes each. Gracenote did not recognise the disc. The first 18 tracks showed reasonable track lengths, but track 19 showed 14 hours 43 minutes 21 seconds [!] and track 20 showed over 1 hour [possibly track 20 was showing the length of the entire CD]. The remaining 2 tracks were successfully imported into my other iTunes on a Windows XP machine (where Gracenote *did* recognise the CD) and transferred to the Mac over my internal network. The next 2 CDs also had exactly 20 tracks each, and also had track 19 showing 14 hours 43 minutes and a few seconds (not quite the same as the original track 19, but close...) and track 20 showing over 1 hour [again possibly the length of the entire CD].
I tried "Get album artwork" on one of the early tracks of one of the CDs, and it came back with an error "Invalid TOC" - this looks to me like the table of contents is getting corrupted (hence the bizarre track lengths reported, and hence Gracenote not recognising the resulting bizarre profile) when there are exactly 20 tracks on the CD.
But a CD with 21 tracks looks OK, and so does a CD with 8 tracks.
I'm putting this one down as ** SOLVED BY USING ITUNES ON WIN-XP AND TRANSFERRING FILES BETWEEN MACHINES ** but I would like to know what is going on!
Has anyone else had a similar problem?

At the lower bitrates that were popular several years ago, like 128, AAC provides better audio quality than MP3. At some point ( the dbPoweramp experts believe it is 160 ) the advantage disappears, and above that AAC and MP3 are sonically equivalent. However, MP3 still enjoys a huge advantage in acceptance and compatibility across multiple players, programs, and phones.
In any case, it hardly appears to be worth the trouble to re-rip your CDs. But don't discard them either!

Firefox hangs and will not allow me to access other programs running when I resize a pop up window, move a pop up window, accidentally right click flash content.

Firefox hangs and will not allow me to access other programs running when I resize a pop up window, move a pop up window, accidentally right click flash content.
== This happened ==
A few times a week
== Not sure when it statrted

Hi.
When this happens, please press CTRL+SHIFT+ESC and see how much RAM and CPU Firefox is using. If they're sky high, then... Well, that kind of issues are, unfortunately, more common and the we'd like. Thankfully, 99% of the cases are very easy to solve. However, you do need to diagnose what your exact problem is. Do this:
#run Firefox in safe-mode to disable all extensions and plugins. If this fixes your issues, be them with RAM or CPU usage, then you know it's a problem with plugins or extensions. Proceed to number 2. If safe-mode doesn't fix the issues, then read bellow, after this list;
#update all extensions and plugins in your Firefox. If this doesn't solve the issues, proceed to the following number;
#disable all extensions and plugins in your Firefox (not running safe-mode). Being certain that, as in safe-mode, the problems you're having have gone away, enable one plugin at a time. You should be certain that you WANT that plugin to be enabled, so keep your overall number of plugins as low as possible. When you encounter the problems, you know you've found a problematic plugin, so disable it for good. Keep enabling all plugins (except problematic ones) until you've gone through them all.
#enable one extension at a time. Again, be certain that you WANT that extension to be enabled, so keep your overall number of extensions as low as possible. When you encounter the problems, you know you've found a problematic extension, so disable it for good. Keep enabling all your extensions (except problematic ones) until you've gone through them all;
#you're done! You've fixed your problems with problematic add-ons.
Ok, if disabling all extensions and plugins through safe-mode didn't work to bring Firefox's CPU and RAM usage to good levels, then you have different issue. The most likely scenario is that you have a third party software running on your computer that is messing with Firefox. Do as follows:
#do a virus/malware check on your computer. If this doesn't fix it, proceed;
#disable all software running in the background that you don't want to have running in the background (in windows, this is done by pressing WINDOWS+R in your keyboard, typing "msconfig" (without the commas) and pressing enter. Now, under the "Startup" tab, you can uncheck the software you don't want, and reboot your system for changes to take effect. If you're unsure of what software you want running, ask someone with more experience). If this doesn't fix you issues with Firefox, proceed;
#check your firewall/antivirus/security suite for enabled functions/features that you don't want and/or may be conflicting with Firefox. You'll find that these features are most likely tied to Internet Security features, such as link scanners or URL checkers and the like. If you're not sure they are conflicting with Firefox, simply try to disable to see whether or not that's true. As long as you don't browse the web with your antivirus completely off and your firewall completely turned off, there should be no problems. If this doesn't solve the issues, proceed to the following number;
#check your operating system security options, mainly advanced options that are not configured by default. While it's very unlikely that this may be the cause of the problem (after all, it's the last item on the list), it's remotely possible. If this doesn't do it, I'm out of ideas. Except make sure you've followed my instructions correctly.

Is there a way in iTunes 11 to double click on an album and have the track list show up the way it used to in iTunes 10.7?

I'm talking about Album view where album covers are shown where you used to be able to double click and have it show up in a list view, but now in iTunes 11 there's just a window that pops up with the track list in front of other albums. Any way to get it back to the way it was in iTunes 10.7 where you double clicked on an album and it went into a list view?

Turning your Mac into a clock radio.
1. In iTunes create a playlist that contains just the radio station you want to wake up to.
2. Export the playlist (as .m3u works well). Get Info on your playlist file and look at the Open With entry to make sure it points to iTunes, VLC or some other app that will stream your station.
3. In iCal create an event entry at the time you want to wake up.
4. Right (or Control) click on your wakeup event and select Get Info.
5. For "alarm" select Open File.
6. Now under Open File there will be a place to add the file to open. It will probably be some default entry (like iCal). Click on it will allow you to select "other." Then use the file dialog to select your playlist file.
Your Mac will wake you up at the appointed time. You don't need to keep iCal running. If you want to put you Mac to sleep for the night then there is one more thing you need to do. Open System Preferences to Energy Saver and click on the Schedule button. Check Start up or wake and set the wake up time to slightly before your iCal alarm time.
Dan

HT5628 How to fix track pad and audio drivers if we install windows 8 on macbook pro??

Can anyone help me how to install track pad and audio drivers for my MBP if i install windows 8 on it?

Run Boot Camp Assistant and select the menu option to download the Windows Support software, Then start Windows and install the Windows Support software. Follow the Boot Camp instructions which detail how to download and install the drivers (Windows Support software).

Use of Java Swing +Applescript to move and resize Mac OS X windows using

Here is an interesting use of Java on Mac OS X and Applescript to
enable moving and resizing of windows using mouse and keyboard:
[MoveResize tool|http://code.google.com/p/sandipchitalesmacosxstuff/#Move_and_resize_windows_on_Mac_OS_X]
How it works:
The implementation uses Applescript to get the front most window and
it's bounds. It sends the bounds rectangle to a server implemented in
Java over a socket connection. The Java server takes the screen shot
of the full Desktop and uses it as the Image label (a JLabel with
ImageIcon) as the content pane of an undecorated JFrame which has the
same bounds as the Desktop. A JPanel with semitransparent background
and a dark rounded rectangular border is given the same bounds that
were received over the socket. This JPanel is added to the
PALETTE_LAYER of the JFrame's layered pane - which makes it appear
floating in front of the front window. A Mouse and a Key listener
added to the JPanel allow moving and resizing of the JPanel. When the
user types the ENTER key the JFrame is hidden and the new bounds of
the JPanel are sent back to the Applescript over the socket connection
which moves and resizes the front most window.
Enjoy!
Sandip
Edited by: chitale on May 14, 2009 4:12 AM

Copy the /Home/Documents/ folder to the NAS drive. That drive needs to support AFP or you may run into filename problems and/or other file related problems due to filesystem differences.
Once the folder has been moved to the NAS select the folder on the NAS and CTRL- or RIGHT-click. Select Make Alias from the drop down menu. You should now have an alias named "Documents alias." On the Mac put the /Home/Documents/ folder in the Trash but don't delete it. Copy the alias file from the NAS to the /Home/ folder. Rename it to simply "Documents." Double-click on it to be sure it opens the folder on the NAS. If so you can empty the Trash. You're done.

On Firefox 3.6.x on Mac and Windows, Google Analytics tracking code leads to an Error 400 page

Our business sent out an email campaign that has several links containing Google Analytics tracking code in the URL.
In the tracking code, which is automatically generated via the email campaign software, is an em-dash. The URLs works in every browser (Google Chrome, Safari, Windows) and in older versions of FireFox. They do not work in 3.6.x versions of FireFox in both Mac and Windows.
As a result, when customers click on a link in the email, they get a page that says "HTTP Error 400 - request is badly formed" because FireFox interprets the em-dash as garbage.
Once this error occurs none of the pages in the site can be accessed unless a specific cookie is removed.
Seeing how many people do not know how to clear cookies - it is especially cryptic in the Windows version of FF 3.6.10 - what are the chances that there will be a release of Firefox to remedy this problem? And is there anything else that could be done?

Weird. We are having this same problem as well. Ours happens in Chrome as well. What I have figured out is -at least for us - is its somethign to do with the Google Analytics tracking cookie on our site. If I go to cookies and then delete the _umtz cookie, the site will load fine. In the time being I have set "pageTracker._setCampaignTrack(false); " in our tracking code to keep the script from dropping the cookie in users browsers.

Using Icloud with Outlook 2007 and windows 7, I cannot get my calendar to list the scheduled appointments as it used to do before I cloud. The to do bar just shows no upcoming appointments when my calendar is filled with them. How do I fix this

Since using ICloud with Office 2007 and Windows 7, the to-do-list will not show any appointments. If has the notation that no appointments are available? My calendar is full of appointments. How do I correct this?

I don't have a password on my phone. After attaching the phone to the Windows 7 computer, my DCIM folder is always empty. Here's the solution: While the phone is plugged in to the computer, pick it up and select the Photos application. A dialog box appears and asks if you trust this computer. Obviously, select the "Trust" option. Then the photos will download. If you have a password on your phone, I'm guessing you have to enter it before you open the photo application.

Can you export the date and user to Excel that appears into a Comments field in a tracking list?

Hi everyone,
Can you export the date and user to Excel that appears into a Comments field in a tracking list?
When i export a tracking list with a Comment field in the Content type, the screen where you enter the data for an item, the Comments field just export the text of the comment into the Excel file.
In the Comments field appears also, besides the comment text, the user and date from who and when the comment is added.
Is there a way to export also the user and the date?
Thanks
Wim

create another comment field that doesn't use 'appending', and through SP Designer change workflow keep
updating that field with the new comments (prepend the field with date/username/new comment). Hide the field on all forms, but put it in the view you need to export to Excel.
Please refer few more links: Hope they will help
http://www.nothingbutsharepoint.com/2009/04/16/versioning-append-changes-to-existing-text-view-entries-aspx/
http://sympmarc.com/2011/02/07/showing-all-versions-of-append-changes-to-existing-text-in-a-data-view-web-part-dvwp/comment-page-3/
https://mossipqueen.wordpress.com/2013/03/06/display-all-appending-field-entries-in-a-single-list-view/
http://community.office365.com/en-us/f/154/t/278560.aspx
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

List of OOTB Reports for SQL Server and Windows Server

Hi,
I am struggling to find a list of OTB reports from Operations Manager for SQL and Windows. Ideally I need the name of the reports and a list of counters that they report on.
Can anybody give me an idea where I can find this?
Thanks,
Pete
Peter Carter http://sqlserverdownanddirty.blogspot.com/

Hi Pete,
I don't believe that there are any Windows or SQL Server specific reports out of the box from SCOM.
However, when you import the Windows (either Server or Client, unsure which you are referring to) and/or the SQL Server Management Packs, within the documentation it will tell you the reports that will also be imported and thus available.

Resize Track List and Windows

Similar Messages

Maybe you are looking for