Resizing a multiple page document to crop around part of the existing info

Hi guys
I have a portrait document (182x398mm) with information near the bottom (ticket) I would like to resize the document to the size of the ticket (140x80mm) without having to move any of the objects.
I have tried to use the liquid layout tool which nearly solved the problem but I couldnt get my changes to affect the other pages. It would be great if i could change the size by typing in the location of where i need it cropped.
Thanks in advance, hope that makes sense
S

Have a look here, it should do what you want.  For instructions on installing and using scripts look here.

Similar Messages

  • Resize a multiple page document in Indesign CC

    How do you resize a multiple page document in Indesign CC so the content stays centered.
    If I do it from Document Setup it resizes from the top left.
    This use to work from Indesign CS6.
    Thanks,
    Rod

    Try using the Page tool and the Liquid Layout Re-center rule.
    You'll need to either select all the document pages or the master pages you want to resize. When those pages are selected, enter your new page size and choose Re-center from the Liquid Layout menu.
    It's worked for me on pages I've tested.

  • Multiple page document in AICS5 .

    How do I create a multiple page document in AICS5?

    There is no such thing, there are just artboards which are essentially just tiles of a large document that provide a demarcation of virtual "pages" but don't limit content - artwork can always spread across all artboards. Anyway, I strongly suggest you read the online help. There is no point in creating a hundred forum threads to answer such basic questions.
    Mylenium

  • Multiple page document in Illustrator CS6

    Hi,
    I am working with multiple page document in Illustrator CS6.
    I have saved my document in .pdf.
    Before I managed to open the whole file, but now it asks me which page I want to open.
    Can I some way open again the file as a multi page file and work with all the files at the same time?
    jenni

    Did you save the file as a PDF while still working on it and then lose the original .ai file?
    If you only have a .pdf and closed the file, I hate to tell you, but you're going to have to open every page indpenedently then recompile a single ai document if that's what you need. At least that's all you can do with Illustrator as it's installed by default.
    You can try Carlos Canto's script in this thread: http://forums.adobe.com/message/4124513#4124513 it's designed to take a multipage PDF and create illustrator artboards from the PDF pages.

  • Sendmail plugin: emailing multiple page document, each page to a separate email address

    when I try to email a document to separate email addresses it will not separate the pages,  The Sendmail plugin claims (in the page with the "next" button) that it will read each page and use the email address found there to mail that page to that address, but it only creates a multiple page document to mail to the address found on the first page.

    Hey BorealHobbit,
    Could you please provide me few details like what OS version and email system are you using?
    Are you trying to send multiple page PDF document? What Acrobat version are you using?
    Please let me know.
    Regards,
    Anubha

  • Scan into multiple page document Deskjet F380

    HP Deskjet F380
    Windows 7 Home premium 64-bit operating system.
    I need to scan a multiple page document so that I can email it, but I am currently only save each page as individual jpegs.
    I have already downloaded the HP driver recommended.
    Suggestions please?
    This question was solved.
    View Solution.

    Hi @panduke, 
    I understand that you would like to be able to email a multiple page scan. I can help you today.
    I don't have access to the Cue 13 software that you are using, so I will provide a couple of ways to be able to check the setting for creating a separate file for each scanned page or not. If these steps don't match the software that you are using, please provide a screen shot of the software.
    Most likely these steps are similar to your software. Cue 14 software.
    Open the HP Solutions Center software for scanning, click on the Change Settings button, click the Advanced Picture Settings button, check Scan multiple photos to a individual file. Press OK.
    Lite v22 software.
    In the HP Solutions Center software for scanning, click the link Advanced Settings, click on the File tab.
    Uncheck Create a separate file for each scanned page.
    Press OK.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How to create multiple pdf Files out of multiple pages documents??

    I wrote multiple pages documents and stored them in a directory. That is nice, but now I want to transfer them all into pdf files.
    Is there a way to do this or do I have to open them one by one an select "Print" and so on??

    Pages 5 has virtually no AppleScript support so it would be difficult to even make an Automator workflow to do what you want.
    So yes you will have to make a pdf of each one. Be warned that Pages 5 stuffs up links after the first pages of pdfs.
    Apple has removed almost 100 features from Pages 5 and added many bugs.
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Pages '09 should still be in your Applications/iWork folder if you had it previously.
    Archive/trash Pages 5, after Exporting your files to Pages '09, and rate/review it in the App Store, then get back to work.
    Peter

  • I'm trying to print a multiple page document from my ipad using an Airprint printer. Only the first page is printing, Please help?

    I'm trying to print a multiple page document from my ipad using an AirPrint printer. Only the first page is printing. Please help. The printer works correctly with my desktop and laptop.

    What version of iOS are you using?  Some people were having this problem before, and it was fixed when they updated to iOS 5.

  • I am making a multiple page document and need some pages to be landscape and others to be portrait.  How can I do this?

    I am making a multiple page document and need some pages to be landscape and others to be portrait.  How can I do this?

    In pages you can only have one orientation of the Page. You have to rotate the content on the pages that you want horizontal. Save the document in Pages format so you'll have a original version to work on. Then Export to or Print to PDF and open the document in Preview. Here you can rotate the pages to horizontal viewing.

  • I want to delete the last 2 sheets in a Pages document.  I select them in the thumbnails. But I can't delete them.  The 1st pages, the ones I want to keep, are the ones that are deleted.  What do I do?

    I want to delete the last 2 sheets in a Pages document.  I select them in the thumbnails, but can't delete them.
    When I choose delete, the 1st five pages are deleted.
    What do I do?

    "2) The last page, p 6,  is not in a Section.  When I delete p 6 ....pages 2 - 6 are deleted.
    Only page 1 remains."
    Every page in a Pages word processing document is "in a section". It may be the only page in its section, or it may be in the same section as several other pages. From the behaviour you are describing, I'd suspect your document has two sections: section 1 contains only Page 1, section 2 contains pages 2 to 6.
    When you click on the Page 6 icon in the sidebar to the left of the page, you'll see a yellow border around all or part of that page icon.
    If the yellow border contains only page 6, then Page 6 is in a section by itself, and pressing delete will delete only page 6.
    If the yellow border contains page 6 AND any other pages, then all of the pages within that yellow border are in the same section, and pressing delete (while the icons are selected) will delete all of the pages in that section.
    To delete only page 6 (the last page in the document) you need to either:
    Delete any text content (including invisible characters, and preferably including any other objects) on that page, following the suggestions by Peter above,
    OR
    Click immediately after the last text character on Page 5, then go Insert > Section Break to place Page 6 into a section of its own. Then click on the Page 6 icon in the sidebar, check that the yellow border encloses only page 6, and press delete.
    Regards,
    Barry
    PS: It's pretty easy to add extra pages to a document without seeing the invisible characters that cause the page to appear. Not as easy as it was in Appleworks, fortunately where the personal record for one of my Grade 5 students was a 3 page document with over 1000 extra blank pages sent to a printer. AppleWorks read the enter key as a column break (which acts like a page break on a single column document). On a keyboard with a number pad, enter is in a very convenient location to rest a book (or an arm) while thinking about your writing (or chatting with your neighbor).

  • I have been sent a .pages document and would like to extract the photos included in the document as jpegs (need to edit on photoshop and put back in), is this possible? can't figure out how to do it.

    I have been sent a .pages document and would like to extract the photos included in the document as jpegs (need to edit on photoshop and put back in), is this possible? can't figure out how to do it.

    I'm going to answer my own question:
    Easy steps
    Locate the document in the Finder.
    Control/Right-Click on its icon.
    Select Show Package Contents
    All images and embedded objects appear in ‘Data’ folder
    From this blog
    http://vernonchan.com/2013/10/how-to-extract-images-from-apple-pages-5-0-documen t/

  • A finished Pages document to Apple to print - like the iPhoto books?

    Can I send a finished Pages document to Apple to print - like the iPhoto books

    No, but there many companies that will do this for you.
    Search for Digital Printers.
    Peter

  • How do I turn selected text in a Pages document into two columns without turning the whole document into two columns?

    How do I turn selected text in a Pages document into two columns without turning the whole document into two columns?

    Menu > Insert > Layout Break (before and after text) > click in text > Inspector > Layout > Layout > columns: 2
    Peter

  • Data Merge: Multiple records in a Multiple Page Document

    I looked in the InDesign help and under Limitations for merging multiple records it reads:
    You cannot merge multiple records if the data fields appear on a document page in a document with multiple pages, or if data fields appear on multiple master pages.
    I'm using InDesign CS 5.5. I produce a 4-page newsletter printed on both sides as a booklet, folded and stapled and each folded page size is 8.5 x 11 (a four page booklet on 11×17 paper) I want to print our 250-name mailing list on the outer cover but have discovered that it only prints the whole thing then staples it or I need to manually print each issue per name.
    Is there a way around this? If we have to use a third party software, would you let me know what to look for? Any suggestions are appreciated.
    Thanks for your help.
    Amy

    How many names are you trying to put on each newsletter? I suspect only one, and that you've misiniterpreted the Help file. That warning applies to putting multiple records from the data file on the SAME page, like a sheet of labels.
    Just so you know, using Data Merge to do a mailing where you are addressing multiple copies of a static document is potentially VERY inefficent. Data Merge needs to make a page for every page that will be printed, so if you have a 4-page newsletter with 1,000 subscribers you will wind up with a 4,000 page document just to get the name and address on one page, and your printer will be re-processing all those duplicate pages for each newsletter. If you have a commercial grade copier/printer there may be a variable data printing module availble for it that will merge your list at print time so you need only send a 4-page file and print 1000 copies (or you can send the job out to a printer who can handle this kind of work), or if you want to print in-house anddon't have VDP capabilities, I recommend doing two files.
    The first file should be the side of the sheet that doesn't change. Print that first as a single page doing x plus a few extra copies (in case of jams in the printer when doing the second half) where x is the number of newsletters you need.  The second file is the other side of the sheet with the addresses, which you do as the Data Merge, and will end up as x pages. After printing the first side, flip the stack and reload so you are printing on the blank side, then send the merge document, asking for one copy.

  • InDesign Data Merge w/Multiple Page Document

    I am working to print a multiple-page newsletter, and printing the mailing information using a Data Merge in InDesign CS4 (PC), with the intent of printing this in-house to send to our members. (My office has been doing this successfully for years using Publisher, but I insisted we update to InDesign.)
    I have the document ready, and I have the Data Source information (set up in tab-delimited (.txt) text format).
    After I have selected the Data Source (Window > Automation > Data Merge), inserted the Data Fields, and then Created Merged Document, I wind up with multiple versions of the Document; one for each person we are sending the newsletter to!
    I was working with our printer technician to solve the issue, but his sources told him that the only way to do this was by using one document as the newsletter master and another document as the Data Merge document, and doing a little magic thru the PostScript driver in the printer.
    (Specifically: the document is letter-sized, set to print as a booklet. The work-around involves copying and pasting these pages into a new tabloid-sized document, creating another blank tabloid-sized document that has only the Data Merge info in the proper place, printing the cover with this Data Merge separately, loading that into a drawer, and printing the new document and wrapping it with the pre-printed cover.)
    1 - What am I doing wrong that gives me over 800 InDesign documents for this newsletter?
    2 - Is there a way for me to print this without the work around?

    That is what Indesign does when it does a data merge, it creates copies of the document and there's no way to change this.  Have you tried exporting to PDF (In CS4 you can do this in one step from the original) and printing?  I've never had anyone confirm it definitively but I'm pretty sure that the PDF created will be an 'optimized' one, meaning that when it sends it off to a compatible printer the images will be sent once and cached, with only the text that changes being sent separately.
    Definitely worth comparing it to Publisher for speed anyway, Office programs can merge straight to the printer, but in effect they're doing the same thing.  There are programs out there for doing far fancier stuff than data merge, probably the best is XM Pie, but unless you've got a printer that recognises their language they're a waste of time in this circumstance anyway.

Maybe you are looking for

  • Pavilion G7 wireless adapter stopped working and now will no longer boot.

    I bought a Pavilion G7 about 7 months ago.  After a couple of months, the wireless adapter stopped working, it just disappeared from the Device Manager (Win7 Home). I reset the computer to factory settings and it fixed that problem. One month after t

  • Printing to a HP Color Laserjet CM4540 MFP from new iPad.

    I am trying to print from my new iPad to my HP Color Laserjet CM4540 MFP. When I try to print the iPad gives me the option to choose my printer. It currently only recognizes one printer- not the CM4540. It recognized the other printer without any pro

  • Need to print Records as according to line values.

    Hi All, I have a query,in my report when i pass the po_number,it prints the po details and line details.For each line i have taxes also. For Example if i have 5 lines (1,2,3,4,5) and for 1st,2nd and 3rd line's have a,b,c,d as the taxes and for 4th an

  • Cannot copy/paste in Firefox 22

    Colleagues, copy/paste functions don't work after update. It's stupid, unprofessional error. Looked through entire forum - no solution. I don't have ZoneAlarm. I just got Firefox updated to v.22 and - surpise! - it works incorrectly. I didn't change

  • Singletone inheritanc​e

    Hi! I implemented a framework based on pluggins, in which there is a GeneralPluggin and five child pluggins that adds some funcionality. I realized that these pluggins coorespond to the singleton pattern so I used the Goop tool to create them in this