Resizing a Photo Grid

Newbie iWeb user here....
Can't seem to resize a photogrid so it's less than 500px in width - what am I missing?

You're missing nothing. It's the minimum width.

Similar Messages

Resizing a photo on export

I am trying to resize a photo so that it will print as an 8x10 without losing any of the image due to cropping. I set the image sizing in export to be a width and height of w=8 and h=10. When i export it, i still get the same crop that it would have if i uploaded an un-resized photo. I am uploading the file to Mpix.com.
Am i doing this wrong or what? I can't get my photo to print in an 8x10. I know about my camera taking a 2x3 ratio photo.
Thanks,
Brian

In the print screen, select print to jpg. Setr the custom file dimensions to 8 X 10. Set sharpening, media type, ppi and colour management according to the paper being printed on (if you don't have a paper profile use sRGB). Set the grid at 1 row and 1 column. Pull your Cel size to maximum. You will now see your print uncropped as it will be on 8 X 10 paper with borders. If you wish to see how it will apear if you filled the paper select zoom to fill. You can also set borders etc. here.
When finished print to file and send the jpg file to the printer.

Is it possible to resize a photo in iPhoto--controlling the maximum dimensions and the dpi?

is it possible to resize a photo in iPhoto--controlling the maximum dimensions and the dpi?

The dpi depends on the print size you'll be making. This explains it in detail: The Myth of DPI.
A 300 dpi image for a 4x6 print will have fewer pixels in it than a 300 dpi image for an 8. 10 print.
You can set the pixel dimension of a photo by exporting it via the File ➙ Export ➙ File Export menu option and use the Custom size setting. However, you should crop the photo to the size ratio you want before exporting, i.e 4 x 6, 5 x 7, etc. Then set the maximum pixel size you want for the image:
OT

Resizing multiple photos in Photoshop

I am trying to resize multiple photos by using the batch option. I have created an action and then go into batch and select that action. It's not working. Anybody have any ideas on how I can resize my photos all at once??

It sounds as if the Action is not correctly recorded. Have you tested it on a single image?
Is there a Stop" in it?
You can always use the one-step convenience of the Image Processor!

Gallery App Help/Lost ability to control whether to resize a photo when emailing

When emailing photos and using the Gallery App I had the option to resize or not. I could select a new size and select "Always" or "Just Once". I don't have the option anymore and I really need to get it back. What do I do?
Example:
I'd begin to compose an email and then I'd select add an attachment & it would take me to the list & I'd select "Picture" at the top of the list on the right hand side. It would take me to the Gallery App where I could select a photo. Before attaching it I would get asked if I wanted to resize it or not along with resizing options to select from. I could use for example like small, medium, and large just by selecting the toggle I wanted. It would also ask "Just Once" or "Always". I think somewhere I may have accidentally hit "always" when I was in a rush & I did not know it. Now all my photos are resized when emailing them and I don't get a choice. I want the choice back not having photos always resized.
I have an LG phone if that makes a difference.
What do I do? Please help!
Thanks

I don't get an error message. The Gallery App automatically resizes the
photos when I try to email them. I had the option to resize or not resize
and it would come up as "Just Once" or "Always" and I could pick the size
of the phone like, original, large, medium, small. I like being in control
of the photos I email from my phone. I have not had any recent software
updates. Under About Phone it says phone name: VS980 4G LTE and when I send
emails it reads at the bottom "Verizon 4G LTE Smartphone"
Thanks
Anne McGugin (Queen Sapphyre)
On Sat, Jan 10, 2015 at 2:40 PM, Verizon Wireless Customer Support <

Make photo grid objects into links?

I would like to make the photos and captions in the photo grid into links. When I select a photo or a caption in the photo grid, the link inspector is grayed out and I can not click "enable hyperlink". Every thing works fine for images and text not in the photo grid. Is it possible to do this?

That is the way photo page works, photo grid thumbnails can not be hyperlinked because they are rendered by javascript widget. But you can put a full URL in thumbnail caption and it is hyperlink as discussed in this thread:
http://discussions.apple.com/thread.jspa?messageID=7358077&#7358077
However, when you click on the thumbnail to go to detail view, the caption is no longer a hyperlink; because caption in detail view is rendered by javascript widget.
That said, what you like to do is very possible but you need to have very good understanding how photo page widgets work and a lot of javascript. Here is one of my example:
http://widgets.cyclosaurus.com/Lytebox/Photos.html
All thumbnail image links in the page had been changed using javascript.
Send them a feedback: http://www.apple.com/feedback/iweb.html

Photo orientation in photo grid

All of my photos in the photo grid are horizontal. Is there a way to change some to a vertical orientation?

The files are from a camera with the auto-rotate function, right? Have the photos been imported into iPhoto and you're adding them from the media pane in iWeb?
One fix would be to upload the files to a folder on the desktop and batch rotate those portrait oriented files with PhotoTool CM. Then import into iPhoto.
Do you Twango?

How do I resize a photo in iphoto and keep it in iphoto library

So in windows I can resize a photo and leave it where it is. Why can't I do this in iphoto?

So in windows I can resize a photo and leave it where it is. Why can't I do this in iphoto?
iPhoto - either on your Mac or on IOS devices, is designed as an application with a lossless workflow. All adjustments and edits are guaranteed to be reversible. You will always be able to revert to the original image. And that would be impossible, if iPhoto allowed you to clandestinely exchange the image file in the place where the photo is stored. iPhoto would not know how to undo the changes you did without using iPhoto to do them. If you do not need a digigal assets management program with a lossless workflow, don't use iPhoto - then you'd be better off with something like Picasa.

In iPhoto how do I open Photo Grid to change number of caption lines?

In iPhoto how do I open Photo Grid to change number of caption lines?

In iPhoto '11 you can only display two lines below the thumbnails of your photos when you browse an event or an album, the titles and the ratings. The title will be truncated, if it does not fit into the single line. From the iPhoto help:
To show title and rating information below photos:
Click to select Photos in the Source list.
Choose View, and then choose the information you want to view:
Titles
Rating
The information field you chose appears below your photos.
To hide this information, choose View, and then choose the information you want to hide.
Regards
Léonie

Add photo grid to a page?

I am trying to add a photo grid to one of my blog entries and I can't seem to get it to work properly. I have cut and pasted an empty album onto the page and set up the height to allow for everything on the page. The problem I am having is that when the album is opened, the height of the page does not adjust for this and the pictures run off the page, running over my footer. I know on "photos" pages the height will adjust as the album is opened and closed. Is there a way for me to reproduce this effect on non "photos" pages.

it sounds like you added the photo grid inside footer_layer, you need to add the photo grid inside body_layer.
there are four layers in iweb page: nav_layer, header_layer, body_;ayer and footer_layer, you can see them by select:
menu bar --> View --> Show Layout or command + shift + L

How does one resize a photo to the dimensions required by a contest?

How does one resize a photo in aperture to the dimensions required by contest?

Are you submitting a print or a file?
You set the size of your print in the print dialog.
You set the number of pixels (the unit of linear measurement of digital images is the pixel) for a file when you create that file by exporting an Image from your Library. You can specify a recommended number of Pixels per Inch by using the (mis-named) DPI field in the Image Export Preset you use when you export.
The files you import have a height and width in pixels. Height/width = the Aspect Ratio. You can crop to any aspect ratio using Aperture's Crop tool.
What are the specs required by the contest's sponsors?
Message was edited by: Kirby Krieger -- added aspect ratio and cropping.

Iweb issues - photos are put in a RANDOM ORDER when added to photo grid

My website created with i-WEB contains a lot of photos.
When I add them to a photo grid (on a page using the "Photos" template, by dragging and dropping from Finder) the order of the photos is randomized by i-web.
They are kind of in reverse order (highest file number first) but with a large number of files just randomly arranged in no particular order. The files have simple numerical names like "img_100, img_101, img_102" etc which are in numerical / date order in Finder, but when loaded into i-web are not in any order.
I can't see a feature / option anywhere in I-web to re-arrange images according to name. I can of course manually rearrange them which is fine for a dozen images, but not when I have 500.
I have tried adding a small number of images to see if it's a problem with overloading the software with too many, but the problem happens with 5 images as well as 500.
(this is i-web '08)
Matt

The photo app puts files in date/time order and ignores their names.
You can look for another app that may honor file names (sorry, I don't know any to recommend) or you can find a program that alters your file properties. If all the files have properties that read the same date and time, then it defaults to alphabetical order

After resizing a photo and viewing in album picture offsets to one side and crashes ios7

After resizing a photo using the edit function , viewing the photo in camera roll
Offsets the picture to one side so its not in the middle , zoom into the pic and zoom back out
The black borders appear at the top and bottom and all looks in centre
But when i flick back and forward through my pics and get back to my
First pic i resized it offsets to one side and the camera roll crashes and freezes

Since you can't drag a photo when viewing in the large mode you can try the following:
1 - make sure the Info drawer on the right side is displayed.
2 - click on a photo and hit the Space bar.
3 - click on the Full Screen button at the lower left.
Now you're in full screen mode with the Info drawer at the right.
4 - either set the rating of the photo to one that you can use to group in a smart album (Command-1 for 1 star, Command-2 for 2 starts, etc.) or add a keyword that can also be used to group the photos in a smart album.
5 - use the right or left arrow keys on the keyboard to move to the next or previous photos.
6 - when complete go to the smart album and drag the photos into a regular album.

Resizing a photo for printing

I am trying to resize a photo for printing to a 8x10 as it still crops off the top and bottom when printing. I took this with my D3100. How can I do this? I have tried printing several times.

Your image does not fit the 8x10 format - so it will always crop - probably not what you wanted to hear. But a couple of solutions for you:
Print the image on a larger paper so that it will fit, you will end up with a border - but will fit or
Resize the image in Photoshop - Image/Size to something like 9" high, that will automatically reduce the width of your image, but you will still end up with a border, but the whole image wil be there
Hope this helps, and maybe next time you can frame the image in camera to ensure your subject fits in a 4x5 ratio (leave a bunch of headroom at top and bottom)
Mike

Fitting or resizing a photo in a drop zone

Is there a way to resize a photo in DVDSP. I have a logo that I want on my menu. It was given to me as both a jpg and psd. I tried putting either in the drop zone. Only part of the image appears in the drop zone. When I enlarge the drop zone I can get the entire image to appear, but then it's as wide as the menu screen (I just want it in a corner). I tried importing a smaller version, but that does the same, but pixilated. Is there a way to get the image to fit the size of the drop zone, not the other way around.

select then click & drag corner handle to size picture
select then click & drag in picture to move
shift alt then click & drag in picture to move picture within the drop zone frame

Resizing a Photo Grid

Similar Messages

Maybe you are looking for