Resizing for internet use

Hi all,
I'm hoping you can help with this one. In order to upload some photos to the internet they need to be not more than 100 pixels wide by 100 pixels in height, they must also be not more than 10KB in file size. My Aperture photos are normally around 2 megapixels. Is there a way of downsizing to the above dimensions in Aperture?
Help appreciated
Pete

I do not have Aperture on the box I am using at the moment, but you can achieve 10KB size in Photoshop by using File/Save For Web with low enough settings. Standard JPEG saves in PS will not go that low.
-Allen Wicks

Similar Messages

  • IMAQdx USB Camera low Resolution -- "For internet Use" Option?

    Hello,
    I have a USB camera that is directshow compliant. The resolution of the camera should be close to 2600x2000 (not sure on exact). When I see available "Video Modes", the highest resolution is 352x288 resolution. 
    The company supplying the camera told me to uncheck "For internet Use" in the property Panel to help fix the resolution problem. 
    I don't see this option anywhere. I looked in the IMAQdx property node as well for any "internet attribute" 
    Any ideas on where this option is or how I can fix this poor resolution?
    Thanks,
    Tony
    Solved!
    Go to Solution.

    Hello Lawrence,
    I contacted the vendor and they sent me a "registration entries" file. To update you just open the file. I was using a Moticam camera and the original SDK didn't allow for some of the changes in the directshow driver so that is why they sent an update. If you are also using Moticam, I can send you the same file, otherwise, contact the vendor directly.
    -Tony

  • Is jdbc thin driver not designed for internet use?

    Is jdbc thin driver not designed for internet use?
    The size of the thin-driver file is about 1MB of size and is
    too large if were to ask clients to download it from the
    internet.
    Can anyone advise on this issue?
    null

    You need to remote onto the server and go into start->control panel-Administration-> ODBC (or sometimes start->administration->ODBC) and set up ODBC connections . Make sure you set them up on the system tab, then you should see them in EAS. I don't remember, b ut don't think you need to restart the Essbase servise for them to take effect

  • Brand new iMac, and the load time for internet use is very poor

    Brought my new iMac home today. 2.7 GHz intel core i5
    Got it set up with my wireless and i am very unimpressed with the internet and loading speed. My phone, 1 lap top, and 1 ipad use wireless in our house along with the iMac. i have a cisco linksys E2500 is that sufficient enough all of my usage? No gaming more than what a todler would play on. Basic internet use and editing pictures.
    My question i guess is, is it my router or are iMac's just not that fast?

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.
    If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

  • I'm going to Europe and will have my iPad along, any tips on the best plans for Internet use etc?

    Any tips for international use with iPad?

    Since storage space is not a limiting factor for you, you might want to take a look at Apple Lossless. Lossless will give you the equivalent audio quality of an uncompressed format such as WAV or AIFF with about a 30% decrease in file size compared to the uncompressed formats. Keep in mind that if you have an iPod, these Lossless fies will severely decrease your iPod capacity. For instance, a 30GB iPod importing the avg. 4 minute song in Lossless will only hold about 1150 songs.
    Personally, I use AAC @ 256 which I find comes pretty darn close to the original CD quality with a large decrease in file size. I have a 60GB iPod, so I was willing to sacrifice some iPod capacity for the improved audio quality.

  • FCP3 capturing media for internet use

    I was wondering how to capture media on fcp3 for use on the net. Without compressing afterward if possible. Is there a preset I can set up for or is my only chance to compress the video afterward? Example: Load a 3minute clip in as a mp3 or wmv or anything else?
    G4 Flatscreen Mac OS X (10.3.9)

    Once it is captured, you can export it to a number of formats if you have the installed codecs.
    Having Quicktime Pro is very useful for this as is Sorenson and/or Flash Pro (if you are trying to compress for web use).
    One of the great things about FCP4.5 and up is Compressor, which has a great array of alternative output formats.
    good luck.
    x

  • Connecting SonyE K750i + MacBook Pro for Internet use

    Hi there,
    i´tried to connect my Mobile Phone Sony Ericsson K750i with my MacBook Pro. It worked so far as i tried so sync both. Or to send pictures from MacBook to the Phone. But, and that gets on my nervs, i tried to use the Phone as a modem - to download my e-mails. I didn´t worked so far. My Provider is O2 Germany. I tried the numbers *99#, 99**1# to 99**6# (APN) and other tricks.
    Does anybody have an Ideeeeeeee!
    Thanks anyway

    a suggestion that worked for me;
    http://www.taniwha.org.uk/files/GenericPhoneScripts2005-09.zip
    that file includes a couple of GPRS script for macosx.
    if you use one of them as your dialup profile and then instead of dialing your gprs number(*99# or whatnot) enter your APN in the dialup string (i entered "internet"). This way i get a connection to the web through gprs.

  • TS3367 Face time settings for Internet use only.

    What setting do I use to ensure that I am only using the Internet to face time and not using my mobile?

    Settings>FaceTime.
    Turn "Use Cellular Data" off.

  • Wired for office wifi for internet

    please help me on how to assign ip address to work station that uses wired connection for office office server and wireless connection for internet use, simultaneously
    Posted by WebUser Betong Lim from Cisco Support Community App

    hi seb_rupik
    i found out that the network that has internet uses both wired and wireless connections, and also uses dhcp, and an access point is also connected to this network for the wireless clients on the other office, we use cisco wireless router for this network that has internet
    and the other network that we use for our office network and connected to a server uses only wired connections and uses dhcp also
    clients need to use both internet and server connection simultaneously as required by our job
    it seems that there are conflicts, when connected to office server the internet connection drops, and when about 2 0r 3 clients are connected to the net others cant make it,
    ill try try to post the output of ipconfig
    thank you very much
    Posted by WebUser Betong Lim from Cisco Support Community App

  • Paying for 3G use

    I do not know if i should buy the ipad with 3g or not. I would like to buy it if they have the 250 mb data use for 15$. Can anybody answer me if the 15$ price is worldwide for internet use. I live in Norway so I do not know if it would be the same price.....?
    Message was edited by: MrDaniel96

    You'll have to ask your carrier what they will charge. It sounds like you are looking at the US website which lists the data plans for ATT in the US. If we travel outside the US then ATT charges us international roaming which is quite expensive.

  • So I just updated to the newest update that was available for safari and iTunes but now it won't let me go on the Internet using safari and  it also won't let me sync my songs ,,,,,it takes forever to back up my iPad AND my iPod so what can I do ?

    So I just updated to the newest update that was available for safari and iTunes but now it won't let me go on the Internet using safari and  it also won't let me sync my songs ,,,,,(it takes forever to backup my iPad AND my iPod) so what can I do ?

    If you're on windows try the following:
    This worked for me an hour ago and has allowed me to sync ok. Still haven't tried downloading the new version 5 to the phone yet as I'm still backing up photos etc just in case.
    1. Quit itunes
    2. Start an elevated command prompt (Start Menu -> All Programs -> Accessories -> right click Command Prompt -> Run as Administrator)
    3. Once in the command prompt type the following 3 words starting where your cursor is flashing: netsh winsock reset
    4. press ENTER
    5. Reboot your machine
    6. Restart itunes & connect device to sync
    7. Good luck  

  • Use airport for internet and ethernet for local?

    Hi. Ive searched around and cant find an answer for this.
    I have a 27" imac connected to my router and all works fine for accessing the internet.
    I have several other devices close by that I want to connect via ethernet. If i connect the imac to another router via ethernet I can browse my local devices but loose internet connectivity. It is as if the imac will suspend the airport connection while the ethernet cable is connected. I don't want my second router to act as a bridge as it doesn't support N speeds.
    Essentially, I want the imac to use airport for internet and the ethernet port for local files.... The only workaround I have is to unplug the ethernet cable from the back of the imac when i want to use the internet. I'm hoping it's just a DNS issue, but cant seem to resolve it.
    I do not need internet connectivity for the other devices and don't see how i can do that without enabling the wireless side of my second router and then creating a bridge...
    Any suggestions?

    It is as if the imac will suspend the airport connection while the ethernet cable is connected.
    The Connection Order on your iMac is set so that if both AirPort and Ethernet are "on", the iMac will give priority to the Ethernet connection.
    If you want to configure your iMac so that it gives priority to an AirPort connection if both AirPort and Ethernet are "on", give this a try:
    Open System Preferences (gear icon on the dock) and open Network
    Click on the small gear icon at the bottom of the connection list on the left
    Click on Set Service Order and drag AirPort to the top of the connection order list
    Click OK, then click Apply
    Now, if both AirPort and Ethernet are active, your iMac will give priority to the AirPort connection. If you want to connect using Ethernet, you will have to turn AirPort off by clicking the fan shaped AirPort icon at the top of your computer screen.

  • Is there a way to transfer the iTunes application to my PC using my iPhone? My PC has no means of connecting to the Internet and I do not wish to pay for Internet tethering for a one time use.

    Is there a way to transfer the iTunes application to my PC using my iPhone? My PC has no means of connecting to the Internet and I do not wish to pay for Internet tethering for a one time use. I don't have the app on my computer and I simply wish to have it on there to actually be able to transfer my files.

    You can transfer the app to your PC to save it, the article below will show you how:
    iTunes Store: Transferring purchases from your iOS device

  • Can i use cdma for internet and gsm for phone at a time in Iphone4s?

    Can i use cdma for internet and gsm for phone at a time in Iphone4s?

    No. Phones sold by GSM carriers can't access CDMA at all and phones sold by CDMA carriers can only access GSM if they are a) unlocked and b) in an area where there is not CDMA.
    Best of luck.

  • Can i use new TC to connect wirelessly to home network and plug my tv into the time capsule for internet connectivity?

    My new tv needs to plug into an ethernet port for internet connectivity. 
    I'm hoping it can plug into my TC however my TC is wirelessly connected to my current home network... how can i get this to work?
    TC version A1470 (i think, brand new)
    Many thanks.
    Ben

    If the TC is connected to a wireless network provided by another Apple router, then the TC extends the network by default, and the Ethernet ports are enabled on the TC.
    If the TC is connected to a third party network wirelessly, then it must have been setup to "join" the wireless network. When the TC is set up this way, the TC becomes a wireless hard drive and nothing more. The Ethernet ports are not enabled when the TC "joins" a wireless network.
    So, a logical first troubleshooting step would be to confirm "how" the TC is currently set up. To do that.....assuming that you are using a current or recent version of AirPort Utility on your Mac.......
    Open AirPort Utility
    Click on the TC icon, then click Edit in the smaller window
    Click the Wireless tab at the top of the window
    Check the setting for Network Mode and report on that

Maybe you are looking for