Resizing partition for windows

Hi everyone, so yeah, resizing my /home partition so I can fit windows onto my hard drive.
I have my main HDD, sda1 has my root files '/' and sda2 has my /home
I've backed up /home to an external but I'm a little uncertain of what to do next. I was planning on using cfdisk to format /home and create a smaller one, then create an ntfs partition. Can I do all of this inside of cfdisk? (only used this once when I was installing arch).
Then what about grub? Do I have to do anything special for that?
I've looked around a little and can't find anything similar to my situation, sorry if I've missed something obvious! Thanks folks

you don't have to delete the partition,
you can resize it (if not with cfdisk - with partition editor - like gparted).
you have to add windows to grub (manualy or with os-prober).
and i think all these are in the wiki.
ezik

Similar Messages

  • I am getting an error when resizing the Mac HD. I had a separate partition for Windows, but have deleted it and want to add the empty 50GB partition to my Mac HD.

    I am getting an error when resizing the Mac HD. I had a separate partition for Windows, but have deleted it and want to add the empty 50GB partition to my Mac HD.

    SparkchaserEd wrote:
    I am getting an error when resizing the Mac HD.
    What does this error say?

  • Looking for a One to Many script to extend the system partition for Windows 7 machines

    Looking for a One to Many script to extend the system partition for Windows 7 machines

    Pre-written scripts can be found in the repository:
    http://gallery.technet.microsoft.com/scriptcenter
    If you can't find what you need, you can request a script (no idea if anyone ever bothers to fulfill these requests though, I know I don't):
    http://gallery.technet.microsoft.com/scriptcenter/site/requests
    Let us know if you have any specific questions.
    Don't retire TechNet! -
    (Don't give up yet - 12,950+ strong and growing)

  • Mac Mini won't boot to Mac after partitioning for Windows 7

    system: 
    Mac Mini, late 2009
    Intel
    4 gig ram
    500 gig hard drive, brand new
    OSX
    Mtn Lion with Mavericks just installed, runs ok
    problem:
    Adding 90 gig partition for Windows 7, now won't boot to either Mac or Windows
    After a little bit sticky install of Mavericks, I had the thing running fine. I downloaded support sw onto the USB drive as per Bootcamp instructions, and started going through the wizard to install Windows 7.
    First try:  "error" while creating the partition. I ran the Disk Utitliy, Verify Disk, found an error, ran Repair, it fixed the error
    Second try: it started making the partition again, and then apparently just zipped through the partition making real fast (it finished so fast I could hardly catch it), then shut down in an apparent restart (as it's supposed to?), and from then on it won't reboot all the way. I get about 15 seconds of gray screen, the Win 7 disk jerks a little, then screen goes blank and silence. No hd activity. Tried restarting with all the usual key combinations (Command-R, "X" key, Option key, etc, etc). Nothing will bring the Mac login screen up again.
    What gives? It is such b.s. for this stuff to be so flaky. This is all totally current software on the Mac side, running fine for days, and an apparently ok partition created. Fix me, Apple.

    Got it. Thanks for the help.  Isn't there any boot disk thing that I can just stick in there that will jerk the OS sideways and give me the Mac login screen, or did the Bootcamp/partition attack just wreck everything?  I don't see why I have to do an entire scrape of my totally updated and formerly working OSX just to retry a routine Bootcamp partition, which the girl at the Mac Store in Seattle here assured me has worked for them all the time.   It really is a crock. Maybe I shouldn't bother trying to put Windows 7 on there at all if all these latest versions are so flimsy. I wouldn't want to have to do it all again. But it looks like I'll have to at least once. And send Apple the bill for my wasted time. I ain't feelin' the glamour.

  • Strange error when Bootcamp attempts to create partition for Windows

    I get a strange error when I tell Bootcamp to create a partition for Windows. I get to the Create a Partition stage. I select 20GB for Windows leaving 91GB (39GB free) for OS X. I then click Partition and it gives me the following error
    *The disk cannot be partitioned because some files cannot be moved.*
    Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again.
    My disk is formatted in Mac OS Extended (Journaled), I have closed all applications (besides Bootcamp Assistant) and I have even restarted and tried again to see if that might help. Nothing. I can't get it to partition. Any thoughts? Can I partition my disk manually through disk utility and then select it in Bootcamp?

    Hi,
    this gets asked at least a thousand times by now.
    Have a look at this thread for solution http://discussions.apple.com/thread.jspa?messageID=10540273&#10540273
    Regards
    Stefan

  • After upgrading to OS Mavericks, I realized that the Partition for Windows is gone. I have really important data on this drive without a back up. Is there any way I can get this data before reformatting. Is there any third party software for receiving the

    After upgrading to OS Mavericks, I realized that the Partition for Windows is gone. I have really important data on this drive without a back up. Is there any way I can get this data before reformatting. Is there any third party software for receiving the data or any possible way? Money is not a limitation to this fix. Please help!!!

    sure pretty simple.  make a backup of your current settings
    http://support.apple.com/kb/HT1766?viewlocale=en_US
    then restore device from old backup you need pics off of
    then import pics to computer
    http://support.apple.com/kb/HT4083
    you may need to save pics to camera roll first
    then restore the new backup and sync pics back to phone via itunes
    Peace, Clyde

  • Boot camp 5.0.1 aways crash when i try to create a partition for windows. My mac is new MBP retina.Any one can help me?

    boot camp 5.0.1 aways crash when i try to create a partition for windows. My mac is new MBP retina.Any one can help me?

    boot camp 5.0.1 aways crash when i try to create a partition for windows. My mac is new MBP retina.Any one can help me?

  • The larger the partition for windows, the slower it will run?

    Hello Everyone,
    Someone has told me this was the case, The larger you put your partition for windows, your computer or windows will run slower. Is this really the case? i was planning to make windows 500GBs and Mac 500GBs, will this cause any issues?
    Thank You

    Yep, even if you put them to 500GB each.
    If this were true, 500+GB hard drives wouldn't be very popular. Also, IF there is any connection between HD size and speed, it'd be very very hard to notice. Generally, at least in the past, HD's with more storage feature slower drive speeds, so this is potentially where this untrue statement came from, however, I do believe that is a thing of the past and Windows will run fine on your 500GB partition, without any noticable speed difference from a smaller sized partition. The drive still spins at the same speed, regardless of partition size.

  • If i create a partition for Windows 7, and boot up in Windows using Boot Camp, can I still access the files from the Mac partition (Photo's Music etc.)

    If i create a partition for Windows 7, and boot up in Windows using Boot Camp, can I still access the files from the Mac partition (Photo's Music etc.)

    JDFitch wrote:
    Ok Great,
    Will installing Boot Camp drivers allow me to both read and write to the OS X Volume from windows?
    This is important as if it will it means i can make the windows partition a lot smaller and keep all my files on the OS X partition which would be preferable.
    Jon
    No, OSX will be read only (from Windows) and vice versa. (you can install 3rd party utilities on either or both partitions, to make read/write possible)

  • Having an issue with creating a partition for Windows 8?

    Hey, all. I'm trying to make a partition for Windows 8, but now it's stuck on the "shrinking the disc" phase of the partition. It's been over two, and it's only about 25% through. It's been there for a good hour and a half. Should I let it sit through the night, or do a full reboot?

    Likely you have already figured it out by now and this is just a guess.
    I suspect that if the flash skin is linking to it's embedded assets (not embedded) or is using css (same difference) then the flash player is not able to access the assets from the context of the page in which it is being included.  Check for problems with the way that the paths were defined to those assets.
    -Joe

  • Do I have to partition for Windows as soon as I start my new MB Pro?

    I have a new MacBook Pro coming tomorrow and want to partition for Windows. Do I have to do that right away or can I do later? I also have Parallel 6 Desktop coming in. Does that make any differecne before I start using my new Mac?!
    Message was edited by: ITunesDad

    You only need to partition for windows if you're using Bootcamp. If you're using Parallels than no partition is necessary.
    Regards

  • Help? Trying to create partition for Windows...

    Okay so I'm trying to create a partition for Windows XP and I go to the Boot Camp Assistant and I have it set to 32 GB and I click partition and it says that I have to "repair the disk." So I go to the Disk Utitlity and I tried verifying my Mac HD and it couldn't even verify. Here's the description:
    Verifying volume "Macintosh HD"
    Performing live verification
    Checking Journaled HFS Plus volume
    Checking Extents Overflow file
    Checking Catalog file
    Incorrect number of thread records
    Incorrect number of thread records
    Checking multi-linked files
    Checking Catalog hierarchy
    Checking Extended Attributes file
    Checking volume bitmap
    Checking volume information
    The volume Macintosh HD needs to be repaired.
    Error: Filesystem verify or repair failed
    Someone please tell me what does this all mean and tell me how to make the error go away

    Hello akl88066
    To repair the Macintosh volume, you will need to boot and make the repairs from the install disk as described in the link below!
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8492.html
    Dennis

  • Need help allocating partition for Windows using Bootcamp?

    Using Mac desktop and Boot Camp get to the step where I need to choose what size partition for Windows ver 7 and have tried all different sizes with no luck?
    Norm    

    normbenard wrote:
    Using Mac desktop and Boot Camp get to the step where I need to choose what size partition for Windows ver 7 and have tried all different sizes with no luck?
    Norm    
    "...have tried all different sizes with no luck" tells us nothing about what size you tried. If indeed you tried all different sizes then you don't have enough space. What size did you try? What happens when you try? What error messages do you get?

  • I have a MAC laptop, there used to partition windows XP but I want to change it to windows 7. and after my intstal do not want the road and a partition for windows missing. how to restore windows partition?

    I have a MAC laptop, there used to partition windows XP but I want to change it to windows 7. and after my intstal do not want the road and a partition for windows missing. how to restore windows partition?

    Welcome to Apple Support Communities
    You have an Early 2008 Mac Pro. You have the specs that your Mac Pro needs for more memory > https://support.apple.com/kb/HT4433#4 As you can read, that computer should have come with 2 GB of memory.
    You can buy memory at OWC or Crucial > http://eshop.macsales.com/shop/memory/Mac-Pro-Memory#800-memory Those sell compatible memory with all Macs. You can use another memory, but you can be sure that the memory that these brands sell are compatible

  • How do i partition for window vista

    I have window vista operating system from 2009 it was working fine till now  i had to reinstall it
    when i partition the hd it will partition for  window 7 automatically , when im uploading my drivers it will it dosn't work with vista
    it will not load the drivers atoll popup say im not using windows 7
    any suggestion??

    Hi and welcome to Discussions,
    you can use WinClone for this http://www.twocanoes.com/winclone/ and in here http://www.twocanoes.com/forums/viewtopic.php?t=515 you find a how-to.
    (Topic: My current Windows partition is the wrong size, and I want to make it larger. How do I do this?)
    Other people have used CampTune http://www.paragon-software.com/home/camptune/ successfully.
    Prior to doing this you should make/have a backup of your OSX and Windows files for safety.
    Regards
    Stefan

Maybe you are looking for

  • Downloading photos in iphoto 2011

    please how I can download photos in iPhoto directly to an external usb device? my hard disk is full!! Where can I find the iPhoto 2011 help??thank's

  • Printing a subset of a document

    Hi Guys, I've recently taken the plunge & moved from pagemaker to indesign. All seems to be going well but I am now trying to creat "mini" docs from a large master doc - I'm sure I could do thisn in pagemaker but can't find any way in cs4. I need to

  • How 2 Install Aperture on a new computer

    I just ordered a new Mac Pro. I have Aperture on my old computer and I want to install it on the new one. I don't want to use the Aperture v1.0 CD then do all the updates to get to the latest version. Is there a way to download the latest version of

  • Outlook 2013 not responding when creating a new email item in Windows 8

    This issue occurs intermittently. No add-ins are running. No anti-virus programs are running. Outlook does not respond and it must be restarted. This issue also affects reply email items and forwarding email items as well.

  • Creating a workspace via a trigger?

    Hi All I am new to using Workspace Manager and Oracle in general within a development environment and I am working on a development where multiple workspaces need to be created whenever a developer wants to make a change to the database via a Java ap