Resizing tablespace is taking too much time and freezing the database

This is my database setup:
3 node rac on 32 bit linux (rh 4)
2 SANs (3gb + 2 gb)
asm config: everything is default from installation
current datafiles: 3.2T out of 5.0T (autoextend on)
this is how I do to resize the tablespace manually to test how long it takes:
alter tablespace my_tbs resize 3173562M; //from 3172538M (adding another 1gb)
And it took 33 minutes to complete.
Could someone tell me what is wrong?
ps:: when i check the instance performing, the "SMON" user is like 97% of db activities. And while the resizing is running, the database seem to freeze.
Thanks,
Chau
Message was edited by:
user626162

sorry, it is 5 Tera bytes total.
there are 2 sans, one is 1.7T (one partition). the other san has 3 partitions with 1.1T each. I have only 1 datagroup
I used big file so there is only one big file for this tablespace. the size of the tablespace is 3.2T used with autoextend on (increment size is 1G)
this is the command I used to manually resize the tablespace:
alter tablespace my_table_space resize <3229923M>; //current size + 1G
Thanks,
Chau

Similar Messages

  • Taking too much time and not connecting to ipad software server

    taking too much time and not connecting to ipad software server and not updating.. why

    because everyone is doing the same thing you are... be patient, and you will get the update... I had to grab the update over 3G (it won't let you download or install, but it got me in the door) and then switch back to wifi and download and install.

  • Why it is taking too much time to kill the process?

    Hi All,
    Today,one of my user ran the calc script and the process is taking too much time, then i kill the process. I am wondering about one thing here even it is taking too long to kill the process, generally it will not take more than 2 sec. I did this through EAS.
    After that I ran Maxl statement
    alter system kill request 552599515;
    there is no use at all.
    Please reply if you have any solutions to kill this process.
    Thanks in advance.
    Ram.

    Hi Ram,
    1. Firstly, How much time does your calculation scripts normally run.
    2. While it was running, you can go to the logs and monitor where exactly the script is taking time .
    3. Sometimes, it does take time to cancel a transaction ( as it might be in between).
    4. Maxl is always good to kill ,as you did . It should be succesful . Check the logs what it says ,and also the "sessions" which might say "terminating" and finish it off.
    5. If nothing works ,and in the worst case scenarion , if its taking time without doing anything. Then log off all the users and stop the databas and start it .
    6. Do log off all the users, so that you dont corrupt any filter related sec file.
    Be very careful , if its production ( and I assume you have latest backups)
    Sandeep Reddy Enti
    HCC
    http://hyperionconsultancy.com/

  • Log mining is taking too much time in logical standby database

    dear DBAs,
    today i found a gap between the production database and the logical standby database and i found that the log mining is taking more than 1 hour to complete an archivelog (size: 500M)
    note that the MAX_SGA is 1500M and the MAX_SERVERS=45
    the databases is 10gR2 (10.2.0.5.0) running on a linux machine RHEL 4
    please your help.
    thx in advance
    Elie

    hi,
    can you check metalink id [ID 241512.1]
    thanks

  • I am not getting logged in to google through firefox version 17 and yahoo login is taking too much time and often do not yeild any result and expires.

    I HAVE FIREFOX VERSION 17 IN MY LAPTOP. On logging it straight logs to yahoo but there after it cannot log to any website. After searching for some time it says time over . Please hepl

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    *http://kb.mozillazine.org/Cookies
    *https://support.mozilla.org/kb/Deleting+cookies
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • When particular website taking too much time and browser hangs then open website after 2 min.

    when open www.mjkcollege.co.in in mozilla firefox it hangs and after 2 mins it open. this is only in firefox either IE 9 work better or even crome works fine without hangs. why?

    Hi rkvggn8
    try to '''clear cookies and cache''' from '''Firefox (orange) button''' > '''Clear Recent History''' > '''Time range to clear''' select '''Everything''' > click on '''Details''' and '''check Cookies and Cache''' > '''Clear Now''' and check it again.
    if the above does not solve the issue try to delete or rename cookies.sqlite (as cookies.sqlite.old) and delete also other cookie files if exist like cookies.sqlite-journal in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] in case that the file cookies.sqlite is corrupted.
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • Initramfs too slow and ISR taking too much time !

    On my SMP (2 core with 10siblings each) platform i have a PCIe deivce which is a video card which does DMA transfers to the application buffers.
    This works fine with suse13.1 installed on a SSD drive.
    When i took the whole image and created it as a initramfs and running from it (w/o any hdd) the whole system is very slow and i am seeing PCIe ISRs taking too much time and hecne the driver is failing !
    any help on this is much appreciated.
    there is a first initramfs iage which is the usual initrd the opensuse installs and i patched it to unpack the second initramfs (full rootfs of 1.8GB) in to RAM (32GB) as tmpfs and exec_init from it.
    Last edited by Abhayadev S (2015-05-21 16:28:38)

    Abhayadev S,
    Although your problem definitely looks very interesting, we can't help with issues with suse linux.
    Or are you considering to test archlinux on that machine ?

  • Taking too much time incollecting in business content activation

    Hi all,
    I am collecting business content object for activation. I have selected 0fiAA_cha object,while cllecting in the activation but it is taking too much time and then it asks for source
    system authorisation and then throws error maximum run time exceded. i have selected data flow before there.
    What can be the reason for it.
    Please help..

    Hi ,
    You should also always try and have the latest BI content patch installed but I don't think this is the problem. It seems that there
    are alot of objects to collect. Under 'grouping' you can select the option 'only necessary objects', please check if you can
    use this option to  install the objects that you need from content.
    Best Regards,
    Des.

  • Taking too much time (1min) to connect to database

    Hi,
    I have oracle 10.2 and 10g application server.
    Its taking too much time to connect to database through application (on browser). The connection through sqlplus is fine.
    Please share your experience.
    Regards,
    Naseer

    Dear AnaTech,
    i am going to ask not related this question which already you answered i am going to ask you about that how to connect forms6i and Developer 10g with OracleAS.
    i have installed and working Developer Suite 10g Ver. 10.1.2 and also Form Builder 6i. On my other machine i installed and working Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 and also on the database machine i installed Oracle Enterprise Manager 10g Application Server Control 10.1.2.0.2.
    my database conectivity with Developer suite Forms and Reports and also Form6i and Reports6i are working fine. no problem.
    now the 1 question of mine is that when i try to run form6i through run from web i got this error. FRM-99999: error 18121 occured see the release not.
    this and the main question of mine is this that how can i control my OracleAS 10g with forms because basically the functionality of OracleAS is Mid-Tier but i am not utilizing the Mid-tier i am using here Two-tier Envrionment even i installed 3-Tier Environment so tell me how i utilize it with 3-Tier..
    I hope you don't mind that i ask this question here and also if you give me you email then we can discuss this in detail and i can be helpful of your great expertise. i also know and utilize my 3-tier real envrionment.
    Waiting for your great response.
    Regards,
    K.J.J.C

  • Load is taking too much time & going to short dump.

    Hi,
                We have around 1000 records to be loaded from r/3 . The  load is taking too much time and it is still running.
    When tried to manually update the records ,we are getting an error ' converting  the rate into indirect quote: CAD/USD( ex. rate type EURX). Did any one faced this type of error.
    Thanks,
    APR

    Hi,
    what are you trying to do? If you wanna load exchange rates this can be done via context menu of the appropriate source system ( transfer global settings/exchange rates)

  • Procedure Taking too Much Time

    Hi Guys,
    I have package which contains number of function and procedure which is link with Oracle 's standard report called Prodction Shortage Report , it is taking too much time and even now days it is not finsih after three days.
    So I am looking for some tuning steps which I can follow for all the queries one by one, I tried touse Explain Plan what it is showing not too much difference after movement of column from one location to another etc , even I have updated the existing indexes and also created new indexes.
    Thanks
    Shishu Paul

    Shishu,
    Is this report part of an Oracle product such as the Enterprise Business Suite (EBS)? If so, I recommend you create a Service Request (SR) with Oracle and have them tune the report. Doing your own tuning could cause you some support problems later on.
    Just my two cents...
    Craig

  • BAPI Function taking too much time

    Hi,
    One BAPI function BAPI_INCOMINGINVOICE_CREATE
    taking too much time to process the data. do we have any alternative to reduce the time taken by the BAPI function ?
    like by using any SAP Notes or any other alternative function or by any other way.
    Thanks and regards,
    Shailendra

    HI,
    Please apply the OSS Note 830717. I applied this note and ran transaction code FBZ0 and the "withholding tax code" changed from XX to 03.
    Reward if helpful

  • Query taking too much time with dates??

    hello folks,
    I am trying pull some data using the date condition and for somereason its taking too much time to return the data
       and trunc(al.activity_date) = TRUNC (SYSDATE, 'DD') - 1     --If i use this its takes too much time
      and al.activity_date >= to_date('20101123 000000', 'YYYYMMDD HH24MISS')
       and al.activity_date <= to_date('20101123 235959', 'YYYYMMDD HH24MISS') -- If i use this it returns the data in a second. why is that?
    How do i get the previous day without using the hardcoded to_date('20101123 000000', 'YYYYMMDD HH24MISS'), if i need to retrieve it faster??

    Presumably you've got an index on activity_date.
    If you apply a function like TRUNC to activity_date, you can no longer use the index.
    Post execution plans to verify.
    and al.activity_date >= TRUNC (SYSDATE, 'DD') - 1
    and al.activity_date < TRUNC (SYSDATE, 'DD')

  • Sites Taking too much time to open and shows error

    hi, 
    i've setup sharepoint 2013 environement correctly and created a site collection everything was working fine but suddenly now when i am trying to open that site collection or central admin site it's taking too much time to open a page but most of the time
    does not open any page or central admin site and shows following error
    event i go to logs folder under 15 hive but nothing useful found please tell me why it takes about 10-12 minutes to open a site or any page and then shows above shown error. 

    This usually happens if you are low on hardware requirements.  Check whether your machine confirms with the required software and hardware requirements.
    https://technet.microsoft.com/en-us/library/cc262485.aspx
    http://sharepoint.stackexchange.com/questions/58370/minimum-real-world-system-requirements-for-sharepoint-2013
    Please remember to up-vote or mark the reply as answer if you find it helpful.

  • Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

    Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

    stop the download if it's stalled, and restart your download.

Maybe you are looking for