Resizing the work area

I've done some fiddling - and some googling - and I don't
think it is, but it's worth asking anyway.
Is it possible to resize the work area (the light gray area
around the stage)? I'm trying to work with MASSIVE resizing but the
dimensions are "invalid" when trying to use the properties bar and
if I nudge them too far they'll just disappear of the work area
altogether.

Not as far as I know. But if you are working with MASSIVE
resizing you are also likely to run into trouble with any items
that are 2880 pixels or greater in size. Also if things are more
than 16,000 pixels apart flash tends to lose them.

Similar Messages

How to find workarea ID for the work area name.

Hi Experts..
How to find workarea ID for the work area name.(Work area name CCIHT_WAH-WAID and I want to fetch characteristic data from table AUSP matching the OBJEK field,but I only have Work area name).Can anybody help me to find tables or relationship between Workarea ID and Workarea name for the same.I am using TCODE - CHIB02.Once I select a workarea and click on IHS Data button,I get data for that workarea.I need to find where this data comes from and How is this fetched.
Points would be rewarded for helpful answers..
Thanks
Kunal Halarnakar

U want to fetch the workarea description ?
we can fetch it from CCIHT_WALD table with the RECN value.
The informations are stored in AUSP table with the characterstic(ATINN) value.

How do you reset the Work Area Bar to auto adjust?

This is something that's been a thorn in my side for a while. Maybe I'm just being OCD about it... but I've been wondering if there is a way, once you reposition the I / O points of the Work Area Bar (WAB) you can get Pr to go back to auto adjusting it to the end of your clip.
You can double-click it to get it to expand to the full length of the sequence, if you remember to do that... Sometimes I'm in a rush, or I have 10 sequences and I miss the fact that my WAB is not all the way to the end. I select and batch drag them all to Media Encoder and *POW*... I've forgotten to stretch the Out to end on one sequence ... and I have to re-render. A pain, yes, something I should have double checked, but at 2am these things can get missed.
So, can you get the Work Area Bar to auto adjust again?
If yes, it's probably something ridiculously obvious – but I'll take it!
Thanks
Stephen

I would have an issue with auto or a default for a number of reasons.
Not least this one...
I now place dummy clip ( black video) a distance off the end of my sequence to prevent the End of Sequence Marker displaying at the end of my edited material. I dont want that included in an export.
Here is another...
As I get to lock down and I am sending previews to clients...I insert Black Video head and tail of the edit so that the preview does not start jarringly on first frame video. I have I and Os marked so that I can simply export "Program at length (without black head and tail) when I come to master.
and...
Often I have edit versions (TVCs) on the same time line ( sequence) and I need to adjust WAB or I/Os to export them separately.
Automating stuff to eliminate our dumb moments doesnt help much because it just opens the chance of another dumb moment driven by expectation and forgetfulness. .
Mental checklist is the only way IMHO.

How to delete a shortcut favorite from the browser in the WORK Area

Hiho,
creating a shortcut favorite icon of a browser-website in the work area shows up a symbol to use this shortcut. In the private area I can delete this favorite-symbol by tapping longer on the icon an a trashcan shows up, so I can delete the icon (and the browser favorite from the private area). Not so in the work (buisiness) part of the BlackBerry, there is no possibility to delete this icon. I can't find a policy on the BES10 server or thomething on the Z10, any ideas how i can remove the icon?
Greetings... Ifrani

Hi Ifrani!
I´ve the same problem on my Z10!
CommanderApollo

When I open an image in Photoshop, I cannot see the file. The thumbnail in on the right, but I cannot see the image on the work area. I am using Windows 8

When I open Photoshop CS6 I cannot view the image. The thumbnail is visible on the right hand side and the work area shows the file information, but no image. I have updated PS, my driver. It is the same for both jpg or RAW.

Be sure your graphics drivers are up to date. Try disabling GPU acceleration in the preferences then restart Photoshop.
Benjamin

How to make the CTI respond to the work area again?

Hello,
i suddenly have a unusual problem (4 me). I work on a project and i noticed today that the CTI dose not act according to my work area when i RAM preview. After pressing 0 it just goes after the end of the work area continuing to render
. (green line)
And also it does not start to render at the beginning of the work area. It uses somehow the comp's lenght...
Please advise.
Thanks!
I attached a photo so you can see what is it about.

If you leave "From current time" enabled, you can use 0 to audio preview from the current position or shift-0 to audio preview from the beginning of the comp.

Item & for schedule line & is in the work area

Hi All,
We added some custom fields on the schedule line tab and also in VBEP table. For thie same we also added code in the PBO module of SAPMV45A/4500 screen#. Since we added the code we are getting the error message# V1357 with description 'Item 000010 for schedule line 000040 is in the work area'.
I did check the forum and found couple of notes with this error and some replies say that it is for the quality issue. I tried going to OQ77. But i am pretty sure it is because of what i codded. Because When i comment my code so error shows up. But I am not sure what is the problem with my code.
Here is the sample of my code that i wrote in my PBO module:
    IF XVBEP-VBELN IS NOT INITIAL.
        INPUT = MARA-BRGEW * XVBEP-WMENG.
        PERFORM CONVERSION.   "This is the module that i wrote to convert from G to LB.
        XVBEP-ZTOTALWT = OUTPUT.
        xvbep-updkz = 'U'.
        modify xvbep index ivbep-tabix.
    ENDIF.
Please let me know if i am doing wrong anywhere in the code.
Thanks,
Karuna.

Issue: I got the issue resolved. The mistake i made was the local structure was holding last item which has 1 schedule line and the my first item10 was having more than 1 schedule lines and trying to loop all the schedule lines. As the last item has only one schedule line i was getting the problem.
Solution: I reset the structure to that it will loop from the first line item instead of it holding the last item#.
Hope this helps.
Karuna

Problem in Printing the work area

Hi Everybody,
I'm working in upgrade project.
in 4.7 version, directly trying to print the work area and assign to some other fields.
Eg: write: Mara.
text = mara.
but in 6.0, its not allowing to assign directly like this.
Plz help me urgently. B'coz, we struck in middle.
Thanks in advance.
Regards,
JaganMohan.

Hi,
basically the problem might be in the ecc 6.0 for the attributes of the program where u r writing it might be u checked the unicode check box if it so remove it and then try or else it is proiblem with the unicode in the ecc 6.0 system where u r working
plzz reward if it is usefull
plzz dont forget to reward...

The work area itab is not enough

HI all,
i have written the following code to print data from yemptab
But i'm gettin an error saying that "the work are itab is not enough ". can anyone please guide me here. i'm a fresher in abap.
REPORT YEMPDETAILS.
TABLES: YEMPTAB.
DATA: BEGIN OF ITAB OCCURS 20,
          EMPNO TYPE YEMPTAB-EMPNO,
          EMPNAME TYPE YEMPTAB-EMPNAME,
          EMPCITY TYPE YEMPTAB-EMPCITY,
       END OF ITAB.
SELECT * FROM YEMPTAB INTO TABLE ITAB.
LOOP AT ITAB.
WRITE: /
    ITAB-EMPNO,ITAB-EMPNAME, ITAB-EMPCITY.
ENDLOOP.
Edited by: user2487 on Jul 2, 2010 12:29 PM

Hi,
Use TYPES and Workarea.
types : begin of ty,
       EMPNO TYPE YEMPTAB-EMPNO,
       EMPNAME TYPE YEMPTAB-EMPNAME,
       EMPCITY TYPE YEMPTAB-EMPCITY,
     end of ty.
DATA: itab type standard table of ty,
      wa type ty.
SELECT * FROM YEMPTAB INTO TABLE ITAB.
LOOP AT ITAB into wa.
WRITE: /
wa-EMPNO,wa-EMPNAME, wa-EMPCITY.
ENDLOOP.
Regards
Vinod

Centering the Slide in the work area?

Anyone know how I can get the general work area to display slightly differently?
Specifically, Keynote insists on the slide being shoved up against the top-left corner and I would prefer to have the slide centered in the work area so I can see things "bleeding" off of the page.
I don't get this at all and it's a bit frustrating. Is it me?
Dex

I'd like to see this as well so sent in a feedback form.
http://www.apple.com/feedback/keynote.html
a sort of workaround I've been using is selecting the object I want to move into the slide, anchoring it's move end point and manipulating it's startposition in the metrics tab of the inspector. It works if you're using straight motion paths but if you want to use a curved path or move off the slide, it doesn't always work.
also if you want to move a slide off the left or top of the slide, you can drag past the left/top boundary and even off the keynote window. the anchor will move past the edge. unfortunately the only way to edit it at that point is to delete the action and start over...major PITA.
guess we'll wait for KN09' or maybe Keynote"X"

Pe10: opening a previously saved and rendered project, the work area indicates non-rendered sections

Pe10: when I open a previously saved and rendered project, the work area indicates a majority of non-rendered sections.
When I open a previously saved and rendered project, the work area indicates non-rendered sections. My project is approximately 59 minutes and 27 seconds.
What must be done to have a saved and rendered project, when open again, be rendered?

TRUE_SEEKER wrote:
The price tag of $245 for the Prodad's Mercalli video software is too steep for me right now.
Corel's Avid VideoStudio Pro X4 Ultimate (what a mouthful) includes Mercalli SE. It was on sale at half-price on Amazon Black Friday and I missed it - mostly because I was trying to find out what the 'SE' part of it meant.
Annoyingly (very much so) it seems that Mercalli SE is pretty much the whole deal - a YouTube review of the Mercalli feature in VideoStudio by ProDAD (the Mercalli authors) included all the features I would expect to use.
So it seems that the $80 VideoStudio product includes the $150 Mercalli plug-in. Thus a workflow starting with Mercalli stabilisation in VideoStudio and then switching to PRE is viable. I can't really afford the full price VideoStudio product so I'm hoping for a similar 50% reduction after Christmas.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Error while initializing the work area SYST

Hi Experts,
we did a kernel upgrade in NW 2004 from Kernel 640 to Kernel 700.
OS : UNIX DB: Oracle
At Os Level SAP and Oracle started.
when we try starting the SAP,
it shows the following error : error while initializing the work area SYST
Thanks in Aavance,
Satish T.

> Did you get the solution for this? if so, could you please share the same with me. I also got same error after installing the SAP. From OS level everything looks fine but getting the same error while trying to login from SAP GUI as you reported.
The answer is simple: Use the proper kernel
If this is a new installed system and you can't logon please post the logfile dev_w0 here.
Markus

The work area "IT_ITAB" is not long enough

I created a interna table IT_ITAB with OCCURS 0, But it's giving error as
The work area "IT_ITAB" is not long enough.
So pls send the correct syntax to solve the error....

data : it_data like standard table of mara occurs 0 with header line.
Above syntax is not working...its giving error as "OCCURS 0 is not expected".
I have one more dought...In the report I am providing some of the fields from my own database table.
1. Can I provide the fields when using the WITH HEADER LINE concept.?
2.Can I avoid BEGIN OF after "DATA :"?
3.Pls tell me the exact use of STANDARD key word.
4.What is the memory sys assigning dynamically when using OCCURS 0?
5.What is the syntax to increase the memory?

G'day, i am trying to type into an adobe document using the typewriter function. However everytime after i type the text vanishes. It is almost as if the text is white and vanishes into the background. However this is not the case as the works are not vis

G'day,
I need some help, i am trying to type into an adobe document using the typewriter function.
However every time after i type the text vanishes. It is almost as if the text is white and vanishes into the background.
This is not the case as the works are not visible regardless of the background color.
The text box remains available and can be edited if clicked on, also if i double click on it the typed words become visible and editable, however once i close the box i cannot see them on the screen.
I would appreciate any help i can get, i cant seem to do anything using properties or view.
Thanks
Tiernan

Hi Sara,
See response to your questions below:
1.     Are you running into this issue in a specific PDF, or in all of them?
A.     All of them
2.     What version of Acrobat are you using (and, are you on Mac OS or Windows?).
A.     Using Acrobat 10.0\Acrobat on Windows
3.     If you look at the text properties on the Tools panel (under Format), what color is the text swatch?
A.     Test swatch for the text is black
4.     What happens if you change the text color?
A.     Nothing.
I look forward to hearing back from you.

No Withholding tax calculated when the work area is changed

Hi All
I have changed the work area in infotype 208 for an employee from OH to IL. Then i ran the payroll, but no withholding tax for IL was calculated. The employee residence area is IN.
Any inputs on why its not calculated ?
Regards
Vamsi

Hello Yogesh,
Thanks for your reply!!!
We have solved the issue.
the issue is really due to after 7.3 Upgradation the RSPC_MONITOR had two more new feilds added
1) UNAME & 2) CHECK_TIME
and this fields doesn't exist in the 7.0 Version so due to this inconsistancy the Structure was failing.
so we have included two new Fields in the structure in the program and in the Customer Exit and working fine now.
With Regards,
PJ.

Resizing the work area

Similar Messages

Maybe you are looking for