Resizing using actual measurements in inches. I want to resize an 8 x 10 to an 11 x 14.

I need to resize my photos so I can upload them to a printing service such as walgreen's so that I can pick them up the same day. I want to resize from 8 x 10 to 11 x 14. I enter 11 in the width and when I enter the height the width changes to some strange number. If I can't resize to what I need then elements is just about useless to me. I followed the tutorial but did not get the same result.

8x10 and 11x14 are different aspect ratios. You can not get there by constraining proportions.
What you can do is open a blank file 11x14 with the same resolution as that of the 8x10 file, then copy/paste the 8x10 on this background.
Where is the tutorial which you reference?

Similar Messages

I'm using macbook pro 13 inches,i want to format my macbook because i accidentally installed somethings in my mac and now every time i surf the internet will have many advertisement come out.my mac version is 10.9

I'm using macbook pro 13 inches,i want to format my macbook because i accidentally installed somethings in my mac and now every time i surf the internet will have many advertisement come out.my mac version is 10.9 and i dont have any dvd for format the mac.please help me to solve .

If for some reason you still wish to reformat your HDD/SSD, this video will be very helpful.
Mavericks Clean Install Walkthrough

Can I measure AC voltage using FP-AI-102? I want to measure in the range of 0-120 VAC

Can I measure AC voltage using FP-AI-102? I want to measure in the range of 0-120 VAC

Hello Luis,
The update rate on the AI-102 module is 360Hz, which means that you can only accurately acquire waveforms with frequencies below 180Hz.
FieldPoint wasn't made for high speed measurements, so you will have to make sure that you are able to acquire the waveform you want to with the hardware that you have.
If you want to know how you would do the acquisition, I urge you to take a look at the LabVIEW shipping examples.
Help»Find Examples... and browse to Hardware Input and Output»FieldPoint»Analog IO
As for writing to the file, you can take a look at examples under Fundamentals»File Input and Output. You can use the functions included in the Functions Palette under Programming»File I/O.
I hope that this helps!
Kameralina
Ask NI (ni.com/ask)
Search The KnowledgeBase
NI Developer Zone
Measure It. Fix It. ni.com/greenengineering/
NI Vision ni.com/vision/

How to convert a measure value to null when the actual measure value is 0

Hello Gurus,
I have year, products, measure 1, measure 2, measure 3. I am added three products into one category by using bin in the analysis i am getting zeros for some of the measure cells when it should be null values, because the actual measure values are null for indivudual product. How can i convert that 0's to null. Please advise.
Thanks,
RC

To answer your immediate question, you can write this:
CASE WHEN table.column = 0 THEN NULL ELSE table.column END
Remember though, that any aggregations done on a record that is NULL will not yield a sum. That is why the usual case is to convert NULLs to 0s. But that may not be a concern for what you are doing. Good luck!

Stock report using actual price

HI ALL
We want to have a report which is similar to J3RFLVMOBVED ( Stock on Start、Goods receipt、 Goods issue、Stock on End ）
But the value is using standard price.
We already activated material ledger which will calculate actual price and update to periodic unit price field.
Is there any standard report similar to J3RFLVMOBVED but using actual price ?
Thanks a lot
Danielle

HI
I guess the problem might be lying with the way you
are handling the date or period.
Can you post your code???
Kind Regards
Eswar

How to free rotate an area that has been measured using the measurement tool.

I've measured and area using the measurement tool on one pdf drawing and now want to copy and paste it in to another pdf drawing and rotate it in to position. Is this possible?

Object>Expand Appearance. Then proceed to Ungroup, release clipping paths, etc., to further dissect it. Exact steps will depend upon the specific artwork.
JET

When using the measure tool the imputed scale resets to 1to1 as soon as you perform another action. How do you get the scale to lock?

When using the measure tool the imputed scale resets to 1to1 as soon as you perform another action. How do you get the scale to lock?

Hi there - I think I am having problems associated withg Cause 9 in that in google mail I have another pop email address associated so that I can send using this email address, but then I have both addresses setup seperately in BIS. When I receive a mail from GMAIL I receive a duplicate with "received by: unknown" in the header. I had gmail setup so that it would send using by pop email address as default.
In your answer the settings for the two filters you recommend creating are broken links and I canot actually see them. What are they?
Also What do you recommend setup wise with gmail and a pop account. Some people say it is better to get gmail to receive the pop mail account and run the whole account from there. Blackberry doesn't seem to like this setup very much. Should I completely dissociate the pop account and to try and clarify the distinction between the two? Or should I setup a second gmail account and have that poll my pop account and then have the blackberry feed off these two gmail accounts? The reason I am considering this option is gmail provides a lot of storage and online continuity and this would effectively persist my account.
Your help would be much appreciated.. I have had blackberry woes now for over a month and I have spent hours with various support personel, tried deleteing and sending down new service books etc etc but had no luck yet.
thanks,
Nathan

Updating Unit Cost by using Actual Cost Adjustments

Hi,
How can we adjust Unit Cost by using Actual Cost Adjustments Window?
By giving Cost Adjustment without giving Adjustment Qty, the amount was adjusted to total quantity (transacted during the period). But I want to increase unit cost by a fixed amount. Is there any option?
Thanks in advance.
Regards,
Ram

Hi Ram,
there are some patches released by oracle 5-6 months back(5003789 and 4735489) having this feature.
There is also a meatalink note is available,expalins this cost adjustment type called Unit Cost Adjustment.This is the way it works.....
The Actual Cost process now supports this new adjustment type where you adjust
the actual unit cost of the item with the specified cost. The Actual Cost process
calculates the cost of the item per the current logic and then applies this unit cost
adjustment to calculate the new adjusted cost. This adjusted cost becomes the new actual cost of the item.First the New Unit Cost (without the Unit Cost Adjustment) is calculated.The Unit Cost Adjustment is included only after the Actual Cost is calculated based on the existing Adjustment types. Then, the New Unit Cost (with the Unit CostAdjustment) is calculated.
Hope this helps...
Rgds
Shajahan

How do you permanently set grids/measurements to inches?

Isn't there a way to permanently set the grids/measurements to inches instead of picas? It's taking twice as long to set up a new file because everything is in picas...having to change the preference every single time...that can't be right.

Hi there,
With no documents open, go to preferences and on the left, under "Units and Increments", you can set them there. Now when you open a new document, they will show your new settings. Also, If you right-click a ruler, you can use the contextual menu to change the ruler settings there. Hope this helps.
Cheers!
-Mikey

I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id

I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id

There probably is, but it requires that you be able to use punctuation and write in sentences so that we can understand exactly what you want.
You can block others from using your Apple ID by changing your password. There is no way to erase what was already downloaded on to someone else's device, for obvious reasons,

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. what is the easiest way to do this? i have tried export and import but it didn't seem to work.

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. my goal is to store them in an external hard drive so it doesn't use up memory on the mac hard drive. is it possible to copy the specific projects without copying the entire library? what is the easiest way to do this? i have tried export and import but it didn't seem to work.

What do you not understand?
You can duplicate the iPhoto library (command - D ) and delete everything except the project and its photos from the copy and move that
Or
However the calendar takes very little space - it is simpy database entries - it is the photos in the calendar that take space - and for most people you would wnat to keep those photos in your library
you can use a photo in 50 calendars and it still is only one photo in your library - as I explained calenders do not exist as such - they are simply database entries telling iPhotop how to display the calendar - they take almost no space at all
LN

Hello and HELP! Over the years I have saved Invoices in my Documents. I have just tried to open them and all I am getting is " cannot be opened, Invoice**** is used by another user, do you want to make a copy?" That's on all my invoices.

Can someone help please.
I have just "lost" ( cannot open) all my saved Invoices in the Document folder. All I am getting is " cannot open, Invoice ** is used bey another user, do you want to make copy? " That doesn't work either. I can't get anything on the time capsule either. How can I reset to an earlier time? Or what can I do?
Thank you

Did you recently reinstall the OS then copy all your files back over? Do a Get info on one of the documents and see if your current UserName is listed and has Read & Write permissions. If not select the Documents folder and check that for Read & Write permissions for your UserName. If it doesn't have R & W permissions Add it so it does.

Me and my sister were using the same apple id but know i'm using a new one and i want to change also the icloud account but i'm afraid if i deleted the icloud account it would be also deleted from her iphone, so can i delete it ?

me and my sister were using the same apple id but know i'm using a new one and i want to change also the icloud account but i'm afraid if i deleted the icloud account it would be also deleted from her iphone, so can i delete it ?

You can delete it.

I have some old cd's I have burned on itunes. How can I copy them to my iphone without using the cloud? I donot want to mess with my cloud settings because I am a technophobe . Please be gentle.

I have some old cd's I have burned onto itunes. Howcan I copy them to my iphone without using the cloud? I donot want to mess with my cloud settings because I am a technophobe. Please be gentle

Willy, the procdedure you describe works perfectly for AppleTV G1. In fact, I frequently play DTS music discs ripped to my iTunes library as Apple Lossless (ALAC) and synched to the ATV. What happens is that, as far as iTunes and the ATV are concerned, a conventional stereo 16/44 audio file is being played; however my reciever detects the DTS data stream, and instead of outputting static, it decodes the 5.1 channels correctly. This process parallels the way DTS discs were designed to be played back: a conventional CD player is connceted, via digital out, to a DTS-aware reciever/pre-amp and the two channels of static are recognized as 6 channels of DTS-encoded audio.
However this process will only work if the player (CD, ATV, PC, etc.) sends a "bit-perfect" 16 bit/44.1 khz data stream to the decoding device. In the case of ATV G2 and G3, as has been discussed elsewhere, the unit resmaples all audio - including 16/44 PCM (Redbook CD) - to 16/48. While this is not a big deal for conventional audio CDs, MP3s, and AAC files, it mangles the fragile DTS datastream and renders it undecodable. The resulting static that you hear is just like the static you would hear if you played a DTS CD on a non-DTS capable system.
Sadly, I'm not aware of any easy way around this. You could use a program like Foobar (and the DTS plugin) to convert your DTS CDs to 6-ch .wav or .flac file. From there you could transcode the file to AC-3 and then mux it into a video container that ATV supports. You may need add a dummy video track, for iTunes/AppleTV to be ok with the file, though I'm not sure. This may be a lot of work.
Sorry for the bad news. I wish that the iTunes/ATV ecosystem had better multi-channel audio support.
Steven

Resizing using actual measurements in inches. I want to resize an 8 x 10 to an 11 x 14.

Similar Messages

Maybe you are looking for