Resizing Video and Audio At Once

I need to resize both the Video and Audio concurrently. However, following these directions as provided for in the Manual is not working; only one or the other will resize. What am I doing wrong? - Thanks, Lyman
"To resize both video and audio tracks at once:
Hold down the Shift key, then drag any track boundary to resize it. All tracks in the Timeline are resized by the same amount."

Naw, not that...seriously, this is not working pursuant to the Manual which leads me to believe if perhaps some errata is present in the manual? This is one time where the problem does not lay between the chair and monitor!
Thanks,
Lyman

Similar Messages

  • I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

    I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

    Hi
    In iMovie'11 (version 9.0.x)
    on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
    down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
    Here one can select the Pre-Set speeds
    Are you familiar with getting 'inspector' to run?
    No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
    Yours Bengt W

  • Linking All Video and Audio Clips at Once

    I'm running the most recent version of Premiere CC 2014 on OSX.
    Somehow I accidentally unlinked every video and audio track on my timeline (I didn't make them offline - I unlinked them so that they select independently on my timeline when I want linked video and audio from the same clip to select simultaneously).
    I don't want to have to go through my entire timeline and re-link every clip. Is there a way to easily select all media and link it? I've tried highlighting everything, right clicking and selecting "Link," but this hasn't worked.
    Any tips would be appreciated.

    I have to start you from the beginning to make sure everything is set correctly.
    Under the Edit menu, make sure "Linked Selection" is checkmarked (also Shift+L).
    Once that is done, make sure the video clip is linked the it's corresponding audio in the timeline. Do this by selecting them all, and choosing "Link" under the Modify menu (or hitting command + L).
    Try that and if it doesn't work we'll go from there.
    Joni

  • FR: Keep Video and Audio clips Linked in Multicam once razored

    Here is my feature request, if you agree please cut and paste and submit to feature request!
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    *******Enhancement / FMR*********
    Brief title for your desired feature:
    Keep Video and Audio cuts in a Multicam sequence linked together when using the razor tool.
    How would you like the feature to work?
    Whether inside a multicam created sequence, or a multicam sequence that has been pasted into another layer on a separate sequence, I want the video and audio to remain linked together when a cut is made. Currently, when I make a cut, the audio and video become unlinked and I have to first a. make all the razor cuts, then b. go and relink the video and audio clips back together. Takes an extra 30 minutes every time now.
    Why is this feature important to you?
    To save time and stop the long redundant process of click selecting the video and audio and linking them, over and over and over, in a multicam sequence. Obviously if I can do it manually, it can also be done in-program.

    When you create the multicam sequence manually (still the best way, I think), video and audio remain linked.

  • How to align or sync video and audio?

    In Premiere 13,  once I have added a video/audio clip and then either slow down the clip or add photos in between the clip causes the video and audio to be out of sync.  How does one re-align or re-sync the clip once it has been edited?  Thanks

    mrsndmn
    On what computer operating system is your Premiere Elements 13 running?
    There are several ways to avoid disturbing an existing Timeline when you are adding to it.
    1. Using what are called keyboard modifiers, such as Ctrl or Alt (Windows).
    2. Grouping block of clips so that the clips move together
    The following video tutorial is offered for informational and not promotional reasons
    Premiere Elements: Arranging clips on the Timeline using modifier keys | lynda.com - YouTube
    It uses a version of Premiere Elements earlier than 13, but the principles involved are the same.
    The video and audio that are going out of sync.... are they linked or grouped before the addition to the existing Timeline?
    After the fact, you will need to move the Timeline components back in place.
    If the video and audio are not linked or group, you can
    (a) highlight the clip, hold down the Alt key of the computer main
    keyboard and tap the appropriate arrow key for a 1 frame per tap nudge of the clip.
    (b) highlight the clip, hold down the Shift+Alt key of the computer main
    keyboard and tap the appropriate arrow key for a 5 frames per tap nudge of the clip.
    Please review and consider. If questions or need clarification on the above, please do not hesitate to ask.
    Thank you.
    ATR

  • Video and audio out of synch after export

    Hello guys,
    I have 5 minutes long video on timeline.
    1 audio and 3 video layers.
    All looks good, but once I export it as QuickTime self contained movie (current settings) to my desktop, video and audio is out of synch.
    Any ideas what it might be wrong?
    Thank you for any advise.

    Hi
    Did You Render All - first - before Export
    Did You Mixdown Audio - Render Only - last line
    What material was used
    • Video Codec and fps
    • Audio file formats and bit-depth and frequency e.g. .aiff 48kHz 16-bit
    • What kind of Project Set-Up did You use e.g. Easy Set-Up - PAL-48kHz
    Yours Bengt W

  • Video and Audio Mixed Playlist Idea...

    Ok guys...would anyone else like the following functionality in iTunes?:
    I'd love to set itunes up for a party, and make a playlist that includes BOTH video and audio files (you can already do this....so, cool so far)....
    Then, I'd hook my output up to my plasma TV. When itunes is playing an audio track, it would have the visualizer up, when it comes to a video track the video would automatically replace the visualizer...then switch back when it encouters another audio track.
    Imagine once you had 100 music videos, or even 50 mixed into your playlists...It would be your own personal video jukebox.
    Am I crazy or would anyone else want to be able to "present" their playlists like this?
    as a sidenote: i'm quite impressed how well these videos scale when you play them on a television. on my $5k plasma, they look as good as broadcast television, but not as good as HD or DVD, obviously. So, anyone complaining about quality is probably trying to watch them full screen on a 1024X768 or larger monitor....thats to be expected.

    i was just looking here to see if there was a way to do this for my party tonight.
    guess not. a shame
    so instead of putting videos in the shuffle, i'll put them in a separate playlist and switch over at some point

  • Video and audio freezeing

    For some reason my computer has been running super slow. When watching video like youtube and ustream. My video and audio will randomly start freezing which is super annoying, kind of like a skipping cd or dvd. I have reset safari and cache and its still doing it. i dont know what else to do any sujestions? thanks

    Follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • What can be causing inconsistent DVD video and audio distortions...

    Does anyone have any idea why the DVD I burn using DVD Studio Pro (from a 90-min FCP QT movie) - whether it’s compressed by DVD Studio Pro, or through Compressor (with bit-rates of 4 for avg., and 7.2 for maximum) - plays with some serious simultaneous video and audio distortions on my brand new DVD player – that don’t show up at all when played on a friend's DVD player.
    As a test, I burned a DVD with just the video, and it does NOT play the same distortions on my DVD player. This obviously means the video distortion is related to the audio being there, but, I don’t know why, or how to begin fixing the problem.
    Any help would be tremendously appreciated!

    Oh yes, indeedy!
    Go into the AC3 encode tabs and have a look around. If you never used A.Pack with older versions of DVDSP then none of this will look familiar, but essentially the tabs are exactly the same as the old A.Pack application.
    You can set the desired bitrate - for stereo you don't need more than 192Kbps. You can set the dialog normailsation value (for now, type in -31 and press return) and you can set the compression type - just use 'none'.
    This should get you a reasonably useable AC3 file for your project, but as you might guess, there is a lot more to it than that! Head over to http:..www,macprovideo.com and see if you can get hold of the tutorials for A.Pack, or find a copy of Martin Sitter's book for DVD Studio Pro (any version). The chapter on A.Pack is well worth reading and possibly justifies the price of the book on its own.
    Once you have got the audio encoding sorted out and are using it on a disc, see if the distortion still happens.
    Also, can you describe the distortion that you are seeing?

  • Quick Time 7.67 video and audio not playing in CourseCompass MyMathLab

    When I first used MyMathLab through Course Compass, the video and audio played with the digital picture broken up. Since then it stopped running the video and audio. I have tried uninstalling and reinstalling Quick Time more than once without any change. Now when it is trying to load,I just get white screen with Q logo and an arrow running across the bottom of its window.

    I forgot to mention I use Firefox. I just updated to Firefox 3.6.9 today. The quick Time problem already existed before I update Firefox.Is there a problem with Quick Time being compatible with Firefox?

  • Video and audio out of synch on burned DVD.  DVD project appears to be fine.  I'm using 1X speed to burn disc.  Project info indicates plenty of space.  What should I do?

    Video and audio are out of synch on some chapters of a burned double layer DVD.  The iDVD (7.1.2) project seems to be fine.  I'm burning the DVD using a 1X speed.  What else can I do to solve this problem.  Based on the project information, I have plenty of space relative to the DVD capacity. 

    Follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • Video and audio slowly go out of sync

    im trying ot make encore dvds the first one I made worked fine but now whenever I make a dvd the video and audio slowly drift apart as it plays.
    ive tried converting the audio to AC3 but it did not help. Ive also tried various formats like vob, mp4 and avi.
    does anyone have a solution?

    This may or may not work but give it a try.  I'm not sure what software you used to create the video file that you sent to Encore
    but I'll assume that it is Premier CS3 or CS4.
    Here's what I would do.
    1) output your sequence two ways.  a) seperate Mv2 & Audio file, b) One single AVI file.  Use media Encoder, DO NOT USE DYNAMIC LINK!
    2) Import each one into encore.  NOTE:  The mv2 file will NOT have to be transcoded.
    3) Set each one up on a seperate timeline.
    4) Play each time line.  See if they go out of sync. If they do, make sure that you perform the following.
    5) Place each timeline onto a menu.  label each one so you know which is which (i.e., MV2, AVI)
    5) Burn the project to an image file (don't waste a DVD).
    Next try playing the DVD using a seperate DVD player (NOT ADOBE)
    Test each timeline.  See if they work or fail.
    It sounds like a lot of work but once you know which way works, stick with it!

  • Video and audio chat not working

    Hi All,
    I also have problems with iChat. I tried it before leaving home with two macs on a wireless network. Worked well. Im now overseas and the text chat works ok but both the video and audio chat fails to work. The buddy receives the telephone tone informing him that im trying to chat and once accepted the chat fails and the error message is "buddy failed to respond". Not sure what to do to get this working. Please help as it worked from room to room but not country to country???

    Hi,
    The Log can be expanded when it pops up and the top part of the log can help us to pin point things for you.
    The Logs are also stored in User(your account)/Library/Logs/iChatConnectionErrors
    Error 8s refer to port and NAT issues.
    The details can isolate where to some extent.
    We will need to know the connection device you are using at both ends (Modems and routers) ?
    How you have set them up (DHCP, Ports opened, methods used) ?
    What you have done on each mac to set up iChat and the Mac for iChat
    4:30 PM Saturday; November 17, 2007

  • Which video and audio codecs to use?

    Hi everyone! I've just completed a photo montage for my wedding (200+ people) next week, and need to render/export it today as I'm flying off tomorrow (it's a destination wedding). The montage will probably be projected onto a wall/screen in the banquet hall.
    I tried exporting it once with the 'default' settings offered to me by Adobe Media Encoder, and ended up with a 4GB+ file. I then tried exporting with a QuickTime format (H264 video and AAC audio), and while I ended up with a <200MB file, the audio was choppy every 10 seconds or so. Which is when I gave up and decided to come on here and ask you guys!
    I'm not yet sure what media we're going to be using to play the montage, i.e. my personal laptop, my wife's Macbook, or the restaurant's own system, so I'd like to create several versions just in case --
    1) .MOV (for Macs)
    2) .AVI/.MPG (for Windows)
    3) and a 3rd version to burn onto a DVD
    My project's current settings are: 720x480 (I would like to stay at this resolution for the export), 29.97fps, 48kHz (16 bit). It's a 20-minute montage and I would like to resulting exported file size to be something manageable, perhaps <300MB at the most.
    Based on the above, what video and audio codecs do you recommend I use for each export option? Please let me know if there is any other information you need. Thanks in advance!

    One display/delivery possibilities would be a BD disc through Adobe Encore. That will be easily transportable, will play from any notebook with DVD/BD software player installed, and will be high quality. One can also play on almost any BD player, hooked up to a TV, or projector (HD capable).
    I am also not a fan of any CODEC packs, and ONLY add CODEC's that are necessary. I will also try to go to the source even if it means buying the CODEC. Most "free" versions are hacked, or reverse-engineered, and often do not function nearly so well. The exception to "free" would be CODEC's, like the Lagarith Lossless, or UT, which are free.
    With CODEC packs, what often happens is that one's good, commercial CODEC's are over-written by the hacked versions. Adobe does a good job of :"hiding" its CODEC's, but their priority can still be compromised, when the CODEC pack rewrites the Registry. Also, many will install all sorts of "stuff," and much of that is unneeded, and some totally unwanted.
    Good luck,
    Hunt

  • Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

    Hello All...
    Back after a brief absence, things look a little bit different.
    I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
    Thanks!
    PowerMac G5 1.8 Dual   Mac OS X (10.4.3)  
    Message was edited by: Dan Foley

    Thank you for the replies.  Everyone was correct about the jack, interface, and phasing problems.  I have been unplugging my motu audio interface and then using headphones at work.  I have not changed any detailed audio output settings in logic.  When I read that the jack might be a problem I tried switching headphones.  This actually helped.  I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems.  I can use these headphones with other devices but not the mac.  I have to use ipod ear buds and the phasing seems fixed.  Hopefully this information is helpful to someone else. 
    If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio. 

Maybe you are looking for