Resizing when exporting

Hello everyone!
Just starting to (try to) learn how to use Photos after having used iPhoto for a few years.
One thing I've yet to find is how to change the size of a photo when exporting.
In iPhoto, you could choose quality and image size (small, medium, large, full [or something similar]).
Now when I export (to a folder ready to upload elsewhere), no options are shown.
Would appreciate any help or pointers please!
Thanks

Scrap that! I've found it now! Have to click on arrow next to 'photo kind'!!
Thanks anyway!

Similar Messages

Resizing output when exporting to Flash/SWF

Does anyone know if there is a way to resize the output when exporting a Keynote presentation to Flash/SWF? When you export to QuickTime, you can adjust the output size. I can't find a way to do that when exporting to Flash.

I think that's because the Flash output displays at whatever size you want when you embed it into a website. For example, you can't create a Keynote presentation smaller than 200x200. BUT, if you create at 200x200 and then, in your embed statement, change it to 100x100, then that's how it will display on your web page.

When exporting an image: Image sizing, resize to fit auto changes measurements eg 22cm becomes 22,000cm. How do I fix this?

When exporting an image in LR, any measurement entered into "Risize to fit...."automatically changes the measurement from 22cm to 22,000cm. for eg. or 33cm becomes 33,000cm.
How do I fix this?

Lr always uses three decimals for dimensions in the export dialog. So 22 cm is exactly the same as 22,000 cm.
Maybe you're used to a dot as a decimal separator, and a comma as a thousand separator? If so, it probably looks like 22 thousand cm to you.
Whether to use a dot or a comma for a decimal separator, is set in your computer's operating system.
On windows, Control panel > Region and language.

IDVD Stops Responding when Exporting from iMovie

I'm using iDVD and iMovie (from iLife 06 and fully up to date) on a MacPro (also up to date on all software, MacOSX, Quicktime etc).
This proceedure has worked before several times but now results in a non-responding iDVD every time I try it, including an archive and re-install and a complete new install of OSX and all software on a new partition.
What I'm doing.....
[1] Recording a TV programme on EyeTV (410) and exporting it to iMovie - sucessful every time
[2] Edit the iMove project and add chapter markers and save project - no problem.
[3] Export to iDVD - iDVD shows exporting in progress and whilst this is still showing iDVD launches
[4] iDVD starts playing the music from a std theme for a few seconds and then stops. Then resumes the music after resizing the window and then after a couple of more seconds freezes. From the Dock I can see that iMove and iDVD are "not responding"
[5] Eventually iMovie completes it's "export" and then starts responding normally. iDVD continues to show as non responding although I can move the window around the screen. I have to force quit iDVD to get it to close down.
I have tried:
Re-exporting the project from EyeTV
Deleting the preferences files for iMove and iDVD
Deleting the iLife suite and re-installing
Doing an OSX archive and re-install
Installing a fresh OSX (10.4.8) on a different drive and installing fresh software
Running Disk Utility - clean bill of health on both drives
Repaired permissions
The Console reports the following errors when exporting from iMove to iDVD:
===== Tuesday, 24 October 2006 22:56:45 Europe/London =====
[KN,10:57:08:852]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 0
[KN,10:57:08:852]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 1
[KN,10:57:11:968]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 1
2006-10-24 22:57:53.394 iDVD[424] NSExceptionHandler has recorded the following exception:
NSInvalidArgumentException -- * -[NSCFArray addObject:]: attempt to insert nil
Stack trace: 0x954ee243 0x9264f2cb 0x9264f110 0x925dd399 0x000df708 0x000df806 0x00215e6d 0x002167ef 0x0021470b 0x001a0b4f 0x00184105 0x92627d78 0x92627222 0x92626fa9 0x92626811 0x92621ae0 0x00166dc7 0x9261e861 0x925f2ef1 0x925f2d1b 0x9151d6c5 0x9151d5f6 0x9151d4c2 0x92dda340 0x9325c63d 0x9325c056 0x93255ddb 0x93249d2f 0x0000ad5d 0x0000ab36 0x0000aa51 0x00000002
Result - problem persists. I'm at a loss as what to do next. Any suggestions greatfully received.

Yes, tried that when I deleted the preferences. Disk Utility did not report any permissions needed repairing.
What really mystifies me is that this export to iDVD did work once and I expected it to resume once I'd created a fresh OSX install along with all the iLife apps on a new partition, but it remained the same!
Perhaps there is some sort of other software conflict going on? I have Adobe CS2, MS Office, Toast and FMP installed all are latest editions. On the utilities front I have installed Stuffit Deluxe, Internet Cleanup, Contour USB controller for video editing and a LogicTech wireless trackball. Again all the drivers are the latest releases.
Does anyone know if there are any preferences associated with the other not responding applications listed in my other post that I could try the delete-reboot trick on?

Video/Movie won't play when exported as a PDF.

Hello,
I am creating an interactive PDF using CS5 to display video work. Unfortunately, the video won't play when exported as an interactive PDF, I am just left with blank space. I find this very odd as it plays in preview and also when exported as a SWF but that file type is unsuitable for the project.
Initially when I exported it I got this message: "One or more of the interactive elements are clipped in ways the pdf files can't reproduce...." Obviously, I have ensured the file is resized correctly and also tried .mov, .mp4 and also .flv file types with no success. I have also checked the simple things like ensuring all the right boxes are ticked when I export.
This is not the first time I have embedded video but it is the first time without success despite following the same pattern. Any ideas as to why this would be and how to fix it?
Thank you,
Laura

Use Flv or f4v format, after you have placed video into your layout, make sure that you don´t scale or crop video frame at all.
(Whren you File > Place a video, you will have a loaded cursor with video icon. Click the empty spot on page with loaded cursor, don´t draw a rectangle or click on the top of some exisiting frame)
It´s important that you have your video in 100% encoded size in your layout. If you need to scale or crop it, load that video into Adobe Media Encoder and do it there, and re-encode the video to the correct size and shape aftrwards.
Adobe Media Encoder ships with InDesign.

Wrong aspect ratio or size when exporting Pal anamorph with ProRes codec!

Hi community,
I have a problem exporting a spot in the right format. The customer/the upload service provider needs PAL anamorph 16:9 in ProRes codec.
When I export my FULLHD spot to these setting, the aspect ratio/the spot size turns out wrong. When opened in QT Pro the size is 720x576, what is correct, but the anamorph size quotet in brackets reads different values, for example 1020x576 but never 1024x576, what would be correct.
The service providers online software refuses to work with these wrong nunmbers...!?
The same export settings with QT Animation codec is correct. Also when exporting the same composition with two export modules, the Animation codec is OK, the ProRes codec is wrong. No matter whether I export a PAL-format comp or stretch it while exporting the FullHD comp.
Working with After Effects CC.
Any ideas?

Don't resize the output but instead drop your full HD comp in a standard PAL widescreen comp, fit the HD comp horizontally and then render the new comp without using any resize controls.
Second option, Render your full HD comp to a frame based production master codec (prorez) and then use the Adobe Media Encoder and setup a PAL Widescreen Square Pixel preset. Here's my Pal Widescreen Prorez 422 HQ preset. It is what I use for all requests for Pal ProRez from my clients.

Field value not working as "Can grow" when exported in PDF

Hi, I have a unique problem. We have a report which is using a sub-report. When we run that report in Crystal report and preview then it looks fine. This subreport is designated as "can grow" so if the field length is bigger than the size then it is coming in the second row. Everything works fine except when we export this report in PDF.
When we export in PDF then this field is not working as "Can grow" and remaining value of the fields is truncated. This is happening both in XI and 2008 version of Crystal client.
Thanks,

Hi, This is declared as bug by Business Objects Support and Product team will decide if they want to include fix in next release (or fix). This is not possible before Dec 2009 or Early 2010.
Below are the general steps on how to apply the suggested workaround:
1. Remove the on-demand subreport caption, and add an empty string to it instead.
1.1 In the u201CDesignu201D view of the report, right click on the subreport and select u201CFormat Subreportu2026u201D
1.2 In u201CFormat Editoru201D window, under the tab u201CSubreportu201D, click on the u201CX-2u201D button of the option u201COn-Demand Subreport Captionu201D
1.3 In the u201CFormula Workshopu201D window, highlight the text in the formula, and cut it. ( Ctrl-X)
( We are just copying the text, as we need to use the samething for the formula or text object we will use to replace this. )
1.4 Type the following in the formula: u201Cu201D
1.5 Click on the button u201CSave and closeu201D, to close the u201CFormula Workshopu201D
1.6 Back to the u201CFormat Editoru201D window, click on the u201COKu201D button to accept the change.
2. Create a formula or insert a text object in which you add the text or fields you will like to display
( In the following steps we will be using a formula )
2.1 In the u201CField Exploreru201D, right click on u201CFormula Fieldsu201D and select u201CNewu201D
2.2 In the u201CFormula Nameu201D window, type the name of the formula. ( Example: My subreport caption )
2.3 In the u201CFormula Workshopu201D, copy the text you cut in step 1.3, or simply add the database fields and text you will like to display for your on-demand subreport caption.
2.4 Save and close the formula by clicking on the u201CSave and closeu201D button
3. Insert the formula over the on-demand subreport, and resize the field to be of the desired length.
4. Format the formula to display like a hyperlink. ( Blue font and underlined text )
4.1 Right click on the formula inserted in step 3, and select u201CFormat Fieldu2026u201D
4.2 In the u201CFormat Editoru201D, under the tab u201CFontu201D, set the color to blue
4.3 Still under the tab u201CFontu201D, check the u201CEffectsu201D option u201CUnderlineu201D
4.4 Under the tab u201CCommonu201D, check the option u201CCan Growu201D
4.5 Click on the u201COKu201D button to accept the change
5. Move the formula to the back in order to ensure you can drill-down on the on-demand subreport
5.1 Right click on the formula inserted above the on-demand subreport and select u201CMove u2013 To Backu201D
Now, when exporting the report to PDF format, the formula used to replace the u201Con-demand subreport captionu201D that displays more than one line will all be exported.
This workaround has following limitations:
The User can see the service description in two lines because of the u2018Text Objectu2019, the On demand subreport is not growing into the second line in the crystal report since we removed the caption.
So the user has to carefully click on the first line of the description in the main report to open the subreport. If he clicks on the second line then it wonu2019t open the required subreport and it may create confusion.
If we manually stretch out the subreport to occupy two lines space then it will leave a gap in between when we have only 1 line service description.
So plan ahead of time about how lengthy text in su-report would be.

Do photos get resized when sending from PSE 6 to PE 4?

Do photos get resized when moving them from PSE 6 to PE4?
I've come to understand that using overly large photos in slide shows in PE 4 can cause lots of issues, and its recommended to resize photos to 1000x750 (http://www.adobeforums.com/webx/.3bb8822c) before including them in a slide show in PE4. I'm trying to understand the implications of working with photos in PSE 6 and then moving to PE 4 vs. just doing it directly in PE 4.
I can imagine (at least) two scenarios:
1. I have all my photos in PE6 and want to work ONLY in PE4. I'm guessing i would resize my photos in the PSE 6 Organizer by using File-->Export and picking a smaller file size (e.g., 1024 x 768) and then import them into PE4 and build my slide show there.
2. I have all my photos in PSE 6 and want to to create a slide show there and then move it to PE 4 to touch it up or do some fancy stuff to it. Will the photos be resized so PE 4 won't have trouble with them or do i need to resize them in PSE 6, reimport them into PSE 6, build the slide show, and THEN send it to PE 4?

eric,
See my post over at http://www.adobeforums.com/webx/.59b85fd0/4
for reasons why I think that for your current objectives, working in Premiere Elements (rather than making a slide show in PSE) will be a better choice.
>1. I have all my photos in PE6 and want to work ONLY in PE4. I'm guessing i would resize my photos in the PSE 6 Organizer by using File-->Export and picking a smaller file size (e.g., 1024 x 768) and then import them into PE4 and build my slide show there.
Yes.
A couple of considerations
1- Where will you establish the sequence of the photos in the slide show?
Are you making an Album in PSE 6 in order to establish the sequence of the slides as you are selecting which photos to use? if YES, we can experiment with sending the photo files in their Album sequence to Premiere Elements.
Or will you establish the sequence of the photos within Premiere Elements?
2- When working in Premiere Elements will you be able to do the 600 slides in a single PE project?
I don't know the answer to this: it will be influenced by your system configuration.

Black lines not all showing up the same color when exported as any type file

Hi everyone,
I could really use some help as this is driving me crazy! Whenever I upload my Illustrator file with my logo online or export my logo as any type of file, certain black lines are lighter than others. I checked in Illustrator by clicking the lines that were showing up different shades when exported and all have the same #000000.
Does anyone have any ideas what I'm doing wrong?
Thanks!

Unfortunately my file is set up like a hot mess. Everything is in the same layer and I should have definitely done multiple ones. This is only the second logo I've designed and I'm learning as I go. Basically I did an image trace of the drawing and then went back and manually fixed lines. Instead of having only a few to select I have many all in the same layer as my color.
I noticed my vector logo works fine when exported. It's the files where I am resizing it that are coming up in the different colors.

Image distortion when exporting

Hi all,
I'm experiencing off and on problems when exporting RAW images from LR 3.3 to JPG. (on MacBook Pro Snow leopard 10.6.6)
I am using Camera Raw 6.3.
Original RAW images taken with Canon 550D.
This is what happens:
Original Result
It doesn't matter if I resize or not, change quality of the JPG, sharpen or not, whatever.
11 out of 140 images go wrong, the others are exported ok. Not every 11th image either.
Exporting 1 by 1 no difference.
What's wrong here? Has anybody had this before?
Maybe connected: I have taken a lot of pictures of an ice hockey game some time ago. During import I've seen that some of the images imported had a similar problem. During importing I first saw a normal image, but it was changed to something simular at the end. I thought that was the memory card, as I was shooting multiple shots, low light, high iso.
Thanks in advance
gr. Paul

In addition: I just switched in LR from "library" to "develop" and the image on screen switched from the before and after image in the original post!
I have edited this picture before in LR, have cut the paiting out of it's environment, no other corrections. Probably I edited this one with an earlier version of LR.
Changed to original image, only the crop boundaries disappear, same crazy image...
And now in the library too, of course.
Is it possible that when you copy pictures from one drive to another that RAW files get damaged?
As in copy from camera to diskdrive (import LR) or from internal drive to external drive (as I did from Finder)?

Pages changes the page size when exporting to pdf

When exporting a pages document (size 8.5w x 7.0h) to pdf it changes the size to (8.5w x 11.0h) any suggestions on exporting it correctly.
If not is there a way to resize it once it is a pdf or other software to convert it correctly?
I am using Pages 09 with Lion 10.7.1

Hi Christine
I am in the process of writing a doc on the different options in CR and the "No Printer" option sis one of those. Seeing this post, made me wonder as this looked like a questionable behavior. My testing does not support your observations. Now, I did a very simple test;
Created a report, set "No Printer", set the paper size and legal orientation. Exported to XLS - any format, and the export maintained legal paper size in all instance. I did a few other variations, but I can never get the report to export anything other than Landscape.
Can you please let me know the version of CR you are using?
You may also want to attach the report here with saved data (to attach rename the rpt to txt, then in the reply hit on the "Use advanced editor" link and attach.
BTW.; I am using CR 2013.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

LR 4 on Windows 8 - Cannot create preview thumbnail when exporting?

I thought I had this figured out but it appears to occur somewhat randomly. Since upgrading to Windows 8 when I export files that I have imported from Canon raw .CR2 for some files it gives an error that "the file could not be written" and lists the original source .CR2 file name. It does not do it everytime but once it happens it happens everytime for that file. When exporting 10 JPG files for example only 3 of them may have this issue. The file still exports and creates the JPG file and the only issue with the exported file appears to be that it did not create the preview thumbnail.
I have tried importing the files into new catalogs, writing to different folders etc but it still happens. Any ideas?

Ok, after lots of attempts to recreate I can do it like this:
Export as JPG to hard drive and select 'limit file size' option and give any size smaller than the full 100% quality JPG would normally create. Using any other options to limit file size such as quality < 100 or resize long edge to 1024 completes successfully.
Can someone else confirm this on Windows 8 with LR 4.2, it only takes a single file?

How do I keep the date/time when exporting photos?

When exporting photos from Photos.app on my Mac, it doesn't use the metadata that it displays in Photos--it uses the current date/time. So when I export a photo from 2010, it says it's dated 2015 when I import it into Aperture.
Is there a way to export an image with its original timestamp? Is this a bug? Thanks.

If you are editing tif files, then you have only a couple of choices.
Flatten the image before you save it. This will reduce it down to one layer. That's the smallest you can get.
When you first open the image, look to see if it's 8 bit or 16 bit tif. It won't help you, but if the image is 8 bit, and you save it as 16 bit, you will have dramatically increased the size of the file for nothing. If it's started as 16, no worries!
check if you are saving with compression. Tif compression is lossless, so unless you did something like resize+resample, it remains the same bit density, etc, so should be just as printable as what they sent you (unless you messed up!).
Cheers!

Formatting Columns when exported to HTML

Is there a way to specify the WIDTH of a column when exporting
to an HTML file?
Inside of Discoverer 3.1 or when printed on paper the columns
are fine, however when exported they are 'resized' to the width
of the column heading(or longest value in column).
Thanks in advance

Scott,
You will need to look through your xml files with Discoverer.
Support has a document on how you can alter and change the look
and feel of the html. If they are unable to locate tell them to
talk with development.
Christopher
www.iloveapple.net:88

Pages 08 and Hiding Extension when Exporting

Hi. I am still using Pages 08. Often, I export my documents in PDF and Word format. When exporting, there is a little checkbox labeled "HIde extension." However, when I leave that checkbox unchecked and export the document, Pages still hides the extension. I then have to go the Finder, the Get Info panel and uncheck the box there. Some days, I export a number of documents and I'm finding it frustrating that Pages won't display exported files with their extension showing even when I've told Pages not to hide them. If there's a solution, please let me know. Thanks.

This behavior was described several times but it never surfaced on my machine.
As far as I remember, nobody described a workaround to get rid of this erratic behavior.
Of course, don't hope any change to this app which was replaced by iWork '09 in january 2009.
Yvan KOENIG (VALLAURIS, France) vendredi 15 juillet 2011 23:49:17
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Resizing when exporting

Similar Messages

Maybe you are looking for