Resman hangs with old board.
I have recently had 2 hard drives crash on PC-VXI boxes and am trying to re-install software on a new drive.
Everything seems to work except when I run or re-run resman with a Analogic 8700 board in the VXI box when I get either the above error or it hangs up the computer until I unplug the board. If it successfully runs the first time, it recognizes the board.
I also was checking for a conflict in the resources and there does not seem to be any conflict with A16 or A24.
Changed the VXI bus time-out to 1 msec from 500 uSec. Even tried the advanced mode to set-up retries.
Am using NI-488.2 V 1.7 and NI-VXI 2.05 with VISA 2.5 and CVI 5.0.1.
I currently have 3 computers set-up that run correctly with the 8700 board in it and 2 computers I am trying to set-up both doing the same. Have replaced computers with one previously set-up and it works with the 8700 board.
The computers were initially set-up by an outside consultant who I have not had luck contacting.
How does resman know how to initially communicate with a VXI board?
Hello Jacque,
I am a little confused by which "computers" or "configurations" are working. Is the behavior following the Analogic 8700 board or the PC? Are there any jumper settings that are different between working and non-working configurations? Are there any boards that are not completely in place in the chassis?
The following KB also has a little more information about Resman:
The Resource Manager (Resman) Explained and Useful Tips
I hope this helps, perhaps with a little clarification this can be resolved.
Regards,
Angela
Applications Engineer
Message Edited by Little A on 10-26-2006 01:36 PM
Similar Messages
-
FX5900XT-VTD128 Board hangs with Mother board ASUS A7NE8X-E de Luxe and AMD Athlon 3000+
Hello Folks,
Please, I need your Help !!!
I bought a new FX5900XT-VTD128 Board and I am trying to install it in my new PC and it hangs the PC. It has just frozen it and I can not access neither the Bios or anything else. If I use my old Nvidia 4, everything works fine. My Mother board is a ASUS A7NE8X-E de Luxe and Monitor is a LG Flatron 17" Model: T710SH. The Bios of my PC is the last version liberated by ASUS version 1012 E. My Processor is an AMD Athlon 3000+ DDR 400 - The PC has 1GBDRAM (DDR - 400).
Does anyone have any idea how to solve this problem ?
Thanks,
MarioHi Kingfisher,
Thanks for your help.
But the Video Cards hangs in the Boot moment, before MS Windows XP comes in and the driver begins to act. My concern is a hardware conflict or a incompatibility or even hardware defect.
What kind of troubleshooting is ideal ?
Regards,
Mario -
I am going to try and make a long story less long but here it goes:
I finally put my board in last week and it has been one problem after another trying to get this thing to work. Initially I tried using my old windows install, but because that used software RAID on my old ASUS it didn't work. I had a backup image on an external 1394 HD. I tried imaing that back over (Drive Image 7) to the RAID array on the new board but the drivers wouldn't load correctly with it (nvraid.sys not found or something like that) After that problem I imaged it onto the 250gb SATA drive I set up as a standalone (unhooked the RAID array) the old windows install proved to be unstable and problmatic (not too huge of a suprsise) so I decided to reinstall. About halfway though the install where it asks for info (name, key etc) I had to borrow a PS2 KB/mouse from a friend because the USB ones weren't working, not a defect but anoying nonetheless (neither BIOS setting for kb/mouse made a diff). Finally get windows up and working with my USB KB/Mouse, install the mobo drivers and reboot, now windows wouldn't finsh loading, it just sat at the splash screen. Had to reboot and use "last known good configurtiong" installed the 5.10 drivers from nvidia's website, rebooted and everything appeared OK for once. Except I started getting DRIVER_IRQL_LESS_OR_NOT_EQUAL ( I think that was it) BSOD's. To add insult to injury, I tried reconnecting the 250gb SATA drive and windows sits at the splash screen for about 10 minutes before it continues loading, and you can't see that HD in windows. I decided to leave the 250gb drive connected and reinstall windows, problem is when it says "setup is starting windows" or whatever, it just sits there as well.
I am running out of ideas. This isn't my first system build, and not even the most complex but has been the most difficult. I ran memtest on the RAM and even swapped in some old PC2100 I have, didn't seem to make much of a difference. I called for an RMA today, so I can send it, which looks likely. Oh, and I haven't changed any overclocking settings, because well, I am not an OC'er
System:
MSI K8n Neo2 Plat
Winchester 3500+
Corsair "Value Select" PC3200, VS1GBKIT
2x WDC Raptors 36.7gb
1x Hitachi Ultrastar 250gb SATA
Lite-on 32x12x40 CD-RW
NEC Dual layer 16x DVD-RW
BFG Geforce 5900
Microsoft Natural PS/2 (using that while I troubleshoot)
Microsoft Explorer USB
Delll 1901FP
Any input is apreciated,
PeteQuote from: Tiresmoke on 28-February-05, 13:02:44
It could still be the MB but let the guys exhaust possibles first. MB's rarely are the problem but they get the rapo because it is so hard to isolate them from the other componants. Better to start by isolateting everything that is not absolutely needed tem,porarily and make sure that at least nothing else is the cause. Heck I have even had a cable that stumped me for a while and I was ready to say it was a HDD or controller problem.
OK so the moral of the story is to isolate things by slimming the system down to just what is needed to test. Yes I know I already said that but this is one of the most basic tenants of Troubleshooting. Get down to basics. Do you have another Drive, Cable or power connection you can swap into that circut? Is there another HDD channel you can use to check if it is the controller.
See where we are going with this?
Hey it may still be the MB but let's find out what the Problem really is before guessing. Also note that I was with another Major MB makers board for a while. I gave up as it was not helpful. I am here because of the gang here who likes to help out. Maybe changing to something else is a bad idea even if you do need a MB swap. Just some food for thought.
The list of issues I have had has been diverse enough thus far, that I don't really see how it could be effected by anything other than the mobo and say the processor:
- I have tried swapping out the memory so I know that isn't it.
- Can't be the kb/mouse either as I have tried both ps/2 (borrowed) and the USB ones I own
- Can't be my optical drives as I was still having some of the problems the cable unplugged from the mobo
- I don't really see how it could be the HD's as they worked fine with my old board, the only diff is that this board now has 4 SATA ports. I don't know anyone that has a board with 4 sata ports so I can't try out all 3 drives at the same time.
-I don't have an extra PS that would provide nearly enough wattage or amps that my Antec does, so do suppose it could be that, the symptoms would lead me to believe otherwise.
- I suppose it could be my video card, however it never gave me probems with my old Asus so it would have to be some weird imcompatability, I am not ruling this out, but I don't have another card I can throw in to test it.
I am not against getting the kinks worked out with this build by any means but the kind of problems I am having leads me to believe that it would be the mobo, or one of the components in it. With that said I am all ears. -
Trouble adding RAM to old board
Hello,
I have an old SI7 MS-5124 with a pentium processor. I currently have 4 x 8MB EDO which I - obviously - wanted to increase. I bought 2 x 32MB EDO and inserted them instead of the four old ones. When I turned on the power the machine refused to boot. It just gave me the "ticker"-sound a couple of times, beeped 4-5 times but remained black. Nothing ever appeared on the screen. I took them in and out, switched them...nothing! Then I re-installed the four 8MB-modules, and everything worked just fine again.
I am completely ignorant when it comes to hard core setup, so could someone please give me an explanation for absolute dummies concerning the possible cause of this problem.
Thank you )
LandersThese old board usually have a DIMM voltage jumper setting (3.3v / 5v).
99% of the sticks use 3.3v so check it out. -
Deleting multiple old boarding passes from Passbook
How do I delete multiple old boarding passes from Passbook simply rather than deleting them individually, which would take some time with the number I have.
Hi IanMon,
Welcome to the Apple Support Communities!
Please take a look at the following linked article for information on deleting a pass.
iOS: Using Passbook
http://support.apple.com/kb/HT5483
Adjusting pass settings
Tap the info icon to see settings and additional information on the pass.
From the info screen, you can:
Delete passes
"Pull to refresh" to update the pass
Open or install the app related to that pass
Configure settings:
Automatic Updates
Show on Lock Screen
Have a great day,
Joe -
TS3899 Cannot send email with new iPad air. Works fine with old iPad and iPhone.
Cannot send email with new iPad air. Works fine with old iPad and iPhone. I have deleted account and reinstalled.
Thanks. I got the problem fixed. Spent time with the Apple folks and was kicked up to a senior advisor. It seems the problem was with my internet provider - Tmie Warner. Remember I could use the old ipad and the iphone to send mail. I checked all the specifics between the three units. It seems that TW is changing over from the RR.com to TWC.com. Since the new ipad air was just set up, it fell under the new TWC mail specifics.
-
how do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version
how do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version
-
My iphone 5 wont let me update apps keeps popping up with old apple id how do i fix this
my iphone 5 wont let me update apps keeps popping up with old apple id how do i fix this??
All apps downloaded/purchased are tied to the apple ID used to download/purchase them.
If you change your Apple ID and do not wish to use the old apple ID and password to update them, you have to delete them and redownload or buy them under the new apple ID. -
JavaMail application hanged with no error throwed at Transport.send
JavaMail application hanged with no error throwed at Transport.send,even though I set the timeout property
import java.util.Date;
import java.util.Properties;
import javax.mail.Authenticator;
import javax.mail.Message;
import javax.mail.PasswordAuthentication;
import javax.mail.Session;
import javax.mail.Transport;
import javax.mail.internet.InternetAddress;
import javax.mail.internet.MimeBodyPart;
import javax.mail.internet.MimeMessage;
import javax.mail.internet.MimeMultipart;
import javax.mail.internet.MimeUtility;
public class tt {
static Properties props=null;
static boolean needAuth=true;
static MailAuthenticator authenticator = null;
static String host="host";
static String account="account";
static String password="pwd";
static String sender="sender";
* @param args
* @throws Exception
public static void main(String[] args) throws Exception{
if (props == null) {
props = new Properties();
props.put("mail.smtp.host", host);
props.put("mail.smtp.timeout ", "1000");
props.put("mail.smtp.connectiontimeout ", "1000");
// props.put("mail.debug", "true");
props.put("mail.smtp.auth", String.valueOf(needAuth));
authenticator = new MailAuthenticator(account, password);
MailData mailData = new MailData();
mailData.setSubject("altireport mail configuration");
mailData.setContent("mail server has been configured successfully.");
mailData.setRecipients(new String[]{"[email protected]"});
final Session session = Session.getInstance(props, authenticator);
final MimeMessage msg = new MimeMessage(session);
InternetAddress from = new InternetAddress(sender);
msg.setFrom(from);
// msg.setSender(from);
final InternetAddress[] addressTo = new InternetAddress[mailData.getRecipients().length];
for (int i = 0; i < mailData.getRecipients().length; i++) {
addressTo[i] = new InternetAddress(mailData.getRecipients());
msg.addRecipients(Message.RecipientType.TO, addressTo);
//msg.setSubject(mailData.getSubject());
msg.setSubject(MimeUtility.encodeText(mailData.getSubject(), "UTF-8", "B"));
MimeBodyPart bodyPart1 = new MimeBodyPart();
bodyPart1.setContent(mailData.getContent(), "text/plain; charset=UTF-8");
MimeMultipart multipart = new MimeMultipart();
multipart.addBodyPart(bodyPart1);
msg.setContent(multipart);
msg.setSentDate(new Date());
// msg.saveChanges();
for(int i=0;i<10;i++){
new Thread(new Runnable(){
public void run() {
try {
System.out.println("send...");
Transport.send(msg);
} catch (Exception e) {
e.printStackTrace(System.out);
System.out.println("end!");
}).start();
class MailData {
private String[] recipients = null;
private String subject = null;
private String content = null;
private String attachment = null;
private String attachmentName = null;
* @return the attachment
public String getAttachment() {
return attachment;
* @param attachment the attachment to set
public void setAttachment(String attachment) {
this.attachment = attachment;
* @return the content
public String getContent() {
return content;
* @param content the content to set
public void setContent(String content) {
this.content = content;
* @return the recipients
public String[] getRecipients() {
return recipients;
* @param recipients the recipients to set
public void setRecipients(String[] recipients) {
this.recipients = recipients;
* @return the subject
public String getSubject() {
return subject;
* @param subject the subject to set
public void setSubject(String subject) {
this.subject = subject;
* @return the attachmentName
public String getAttachmentName()
return attachmentName;
* @param attachmentName the attachmentName to set
public void setAttachmentName(String attachmentName)
this.attachmentName = attachmentName;
class MailAuthenticator extends Authenticator {
private PasswordAuthentication authentication;
public MailAuthenticator(String account, String password) {
authentication = new PasswordAuthentication(account, password);
protected PasswordAuthentication getPasswordAuthentication() {
return authentication;
I have tried use session to get a SMTPTransport instance to use sendMessage ,but still have the same problem.No exception ,No error.
This problem doesn't appear always. It appears sometimes.
I hope get help for someone who has the solution for this problem.
Thanks in advanced.Ok, I think I see the problem:
props.put("mail.smtp.timeout ", "1000");
props.put("mail.smtp.connectiontimeout ", "1000");
Why do you have spaces at the end of the property names?
Those spaces are not being ignored, which means you've
set the wrong properties. -
My "Hanging with Friends" app keeps crashing whenever I try to open it. I have deleted and re-downloaded the app, restarted my iPhone, and even restored my iPhone all together, and nothing is working. How can I get this app to work again?
Can you start Firefox in [[Safe mode]] ?
You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can initially skip the step to create a new profile, that may not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
my brother ipad was linked with old apple id and he forgot his id and never use same email.the problem now his mini ipad ask him for this id to open (activate ipad) what we can do ?
He remember the id name and password but he can't enter we don't now if the password is wrong or the id was lock . I have the all thing for the ipad such as his box . I now this is security thing but you could help me.
-
can i restrict apple mail client from downloading all emails...and allow it to pick a start date for gmail mail to sync? i am flooded with old emails, thousands on them ...eating hard drive space of my macbook pro and un necessary overhead
The genius bar technicians can check your MBP for possible hardware problems and specific software issues that you may have. The diagnosis will be free. Any extensive repairs will not be free.
If you have minor software problems, you essentially will have to deal with them yourself. Examine these two comprehensive documents for possible problem definition and solutions. If you encounter problems that you are unable to cope with, start a new discussion and there will be persons willing to assist you in solving them.
https://discussions.apple.com/docs/DOC-3521
https://discussions.apple.com/docs/DOC-3353
Ciao. -
I have copied my iTunes library onto a new computer, but when I play back the songs using the new computer, there seems to be random "miss" or "drop out" during play back, similar to a small scratch on a vinyl record. Although when I play the same song over again, the "miss" occurs in a different location during the song. No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?
You don't say which version of iTunes you are using, but the symptoms you describe have been encountered by some users with the 64-bit version of iTunes 12.1.
There is an alternative version for 64-bit editions of Windows here:
iTunes 12.1 for Windows (64-bit — for older video cards)
that seems to address the most of the playback issues that some users have been reporting with the full 64-bit version of 12.1.0.77 - including problems with Bluetooth speakers where either sound is degraded or completely absent. The alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer. The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio (one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8). It may also be necessary to ensure that your Bluetooth speakers are active and selected as the default audio device before you run iTunes.
If this doesn't address the issue, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers. -
I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software -
Can't Delete icloud with old Apple ID (which is not an email address)
Alright a couple of years ago apple made the switch to an email address as the main log on, which I was cool with. Fast forward to today now that I am interested in backing my phone up to the cloud I can not because it is prompting me for the password of my log in due to the fact the find my phone is on. Meaning my log on back in the day was a random word same as my screen name "VERSE13" not an email.
Any help would be apreciated. I tried all the switching of emails to holding magical massage rocks on the back of my phone.This is what worked for me. Should also work with the other problems with old email address and what not.
First save all your important data. I backed up all my contacts to OUTLOOK and took all my photos off the iphone. This is important as you won't be restoring from an early sync.
The next thing I did was went into my itunes library and deleted all the apps that were associated with my old log in name. (I made a note so I could redownload these later). In Itunes library click on apps then click list. Right click on app and select get info. On the summary tab you will see the apple ID it was purchased/associated with.
The next thing I did was restored my iPhone using the following instructions (which will get you around the whole not knowing the password thing):
With Iphone connected to computer hold power and home button until the phone resets.
When the apple icon comes on release the power button (continue to hold home button).
The iphone screen will display something that is tell you to connect your phone to itunes. On your computer you will receive the following message "Itunes has detected an Iphone in recovery mode. You must restore this iphone before it can be used with iTunes."
Click Ok.
Then click restore iphone.
Then confirm to restore and update.
When complete a screen that says "Welcome to your New Iphone" will be displayed.
Do not select restore from backup. This will just cause the same problems with screen IDs.
At this point just disconnect your Iphone and go through the startup steps on your phone.
Sign in with the Apple ID/Cloud ID that you want to use.
When you are complete with that sync with Itunes library.
Make sure you select to set up as a new Iphone. Place all your APPS and music back on your phone. Set it up how you like it and sync to create a new restore point.
So basically it is just like you got a new phone. So it is very important you save your contacts and pics and video to your local hard drive.
Maybe you are looking for
-
Subcontracting scenario(Sale Order wise)
Hi all We have requirement from our client to map subcontracting process Sale Order Line Item wise, I.e- instead of 541 we will use 311E and send components to vendor (which will create seperate storage location for each vendor). We will receive the
-
Loading an entire JAR via a classloader
Hi how would I load an entire JAR file via a classloader. Currently I'm able to load one file at a time (in this case org.w3c.dom.Node) as shown below: import java.net.*; public class MyJarLoader { public static void main(String [] args) throws Ex
-
Hi, I have this DVI monitor which was able to work when using DVI interface However i do not know what happen. I had a power failure in my home, and the computer was shut off. When the power was back, I turn on my computer, there was an error message
-
Is there a hotkey to go between full-screen apps?
I have multiple full-screen apps. Is there a way to switch between them via the keyboard? In the old day, I could assign Spaces desktop to a hotkey, and jump to it. That's preserved for multiple desktops in Lion OS X, but it doesn't seem to work o
-
Group text ichat with OS X 10.5.6 and 10.4.11
I work in an office with co-workers who wish to engage in a group text ichat. Half of the office has OS X 10.5 while the other half operates off of 10.4. Specifically, I want to know if there is a way to keep a group ichat going in the office when so