Resolution for Screen resolution

I set my screen size to 800 x 600 because I saw it was recommended for installation of a game. But now it is way too large and cumbersome to use. Before I messed with it, it was set at 800 x 500 which was fine. Why won't it go back to that setting when I simply go in and click on that choice? It stays on this large setting. (Even doing this post required manipulation of the down arrows because the drag bars were not accessible.)
Also, how do I remove an "unresolved question"?
NOTE: These profile settings are not correct either. I've just edited them and it said that it saved the changes but only the avatar was changed.

First off, can you verify which iMac you have?
My FAQ here should help:
http://www.macmaps.com/macosxnative.html#IDENTIFY
This forum is only for iMac Intel Core Duos, the new iMacs released in 2006. For iMac G3/450s which your profile currently mentions, there is this forum:
http://discussions.apple.com/category.jspa?categoryID=133
CRT stands for Cathode Ray Tube, or the old "tube television" technology which existed on iMacs prior to the Flat Panel. When you visit http://discussions.apple.com/ you will find an iMac forum, and if you scroll down in the iMac forum, you will eventually reach the CRT forum.
If your screen is an LCD, also known as a Flat Panel, you don't have a 450 Mhz iMac and the answer to your question would be different. So it is important to identify your iMac first before we can give you a concise answer.

Similar Messages

  • Auto resizing tables for screen resolution

    Hi everyone.
    Im currently working on my website using dreamweaver, and i
    just stumbled across a problem. Im building my website for screen
    resolution 1020x768. However, alot of people tend to use 1280x1024
    nowadays. The problem is that images get all screwed up at
    different screen resolutions.
    The best way to fix this would be auto resizing tables (so a
    1280 using can view my 1024 website without any problems). But, i
    have no idea how to create this. Ive been trying dreamweavers help,
    but that didnt help me.
    So i was wondering if anyone around here has the solution for
    my problem.
    Thanks in advance!

    Hi everyone.
    Im currently working on my website using dreamweaver, and i
    just stumbled across a problem. Im building my website for screen
    resolution 1020x768. However, alot of people tend to use 1280x1024
    nowadays. The problem is that images get all screwed up at
    different screen resolutions.
    The best way to fix this would be auto resizing tables (so a
    1280 using can view my 1024 website without any problems). But, i
    have no idea how to create this. Ive been trying dreamweavers help,
    but that didnt help me.
    So i was wondering if anyone around here has the solution for
    my problem.
    Thanks in advance!

  • Quicktime plugin for screen capture does not work in flash player 11.2

    Hello,
                   I have created a quicktime plugin (it is .component file) for screen sharing purpose.
    I have used quicktime framework for that. plugin is detected in flash player.
    This plugin is working perfectly for flash player 11 and below.But,
    It does not working in latest flash player 11.2.
    I have seen following error on console -
    Google Chrome Helper EH[240:e92b] *** QTCaptureSession warning:
    Session received the following error while decompressing video:
    Error Domain=NSOSStatusErrorDomain Code=-8974
    "The operation couldn’t be completed. (OSStatus error -8974.)".
    Make sure that the formats of all video outputs are properly configured
    Note - Compression format used in plugin is kBMPCodecType.
    Please, help me.

    The issue ended up being the change in resolution to my external monitor. Flash was unable to detect the proper coordinates of the color I was trying to select because I was running my monitor in HD mode rather than selecting an actual resolution from my monitor preferences. Changing the settings to an acutal resolution, instead of generic "HD mode" fixed the issue.

  • Hello - Can anyone give me help/pointers on prepping art for screen printing?

    I have expereince in Illustrator, but mostly for print. Is there special ways of preparing art work for screen printing? This would be art/logos for hats, tee shirts ansd promotional materials for a screen prininting company - mostly apparel?
    Thanks, any info is appreciated - I've got to learn the right way to do this in two weeks time -
    Rosie

    Best advice I can give you with so broad a questions is: Forget about color; think in terms of inks. Also think in terms of opaque, not translucent, inks. Inks for the kinds of garments you mention are almost always opaque; so you have to forget about on-screen appearances which assume the translucent inks of offset printing.
    The way you properly prepare files for screen printing is highly dependent upon the capabilities of the particular screen printing house. Screen printing runs the gamut from crude hand-done process in a local T-Shirt shop to highly automated high-resolution imprints on instrument face plates; and everything in between.
    In the most common setups, you should think in terms of line art, not halftone or tint dots. That rules out soft & fuzzy shading, fuzzy drop shadows, and other raster effects.
    Some garment screen shops are able to handle toning dots; other's aren't. Some shops can do 4-color process; some can't. Six-color screen printing machines are fairly commonplace these days, even in local shops. The better garment imprinters have equipment capable of CMYK process, but instead build gloriously brilliant images using six or more opaque inks on any color substrate.
    So without more specifics about the shop capabilities and the specific artwork, it's not a simple matter to give you a ready-in-two-weeks crash course in preparing artwork for screen printing to cover everything you many encounter.
    JET

  • Halftones and dpi for screen printing

    I am creating a halftone effect on a black and white picture for screen printing, using photoshop.  I know about where to place my LPI, however, Im not sure where I should put my DPI.   If anyone can help with some advice, I would appreciate it.   I was also curious if i should some how put it illustrator, and vectorize it, or just print transparencies straight from photoshop.
    Thanks

    There's no need to go to Illustrator with the photo.  You can print from Photoshop using the 1-bit halftone.  The thing that you have to keep in mind is not so much DPI ( which is an output resolution ), but the actual screen mesh used for the actual screen printing.  You also have to figure "screen angles" into the matrix because the screen angles are affected by not only the grament material, but the screen mesh, too.  So, I would recommend contacting the printer and finding out what screen frequency ( LPi / lines per inch ) will work best on the type of garment you are planning to print-on and ask the printer what mesh they plan to use for your job.  I've seen 35 LPi halftones; I've also seen 65 LPi halftones.  The finer the screen mesh, the higher the LPi.  Tell the printer you have a 2-color job printing halftones and you need to know what LPi and what angles to use for color #1, and color #2.  Then, you can input that information into the separation halftone files in Photoshop.  Remember to discuss the garment type ( thread count ) and the mesh of the screen.  If the printer is good and knows what they are doing, they will give you everything you need to know.  If they do not, they'll refuse the job.

  • No batch input data for screen  for VF01

    Hi All,
    Iam trying to to create billing document using  BDC for VF01 with  sales order. For single line item it is working fine and that to in Mode 'A'. But while  creating invoices using multiple sales orders  , Iam getting the following error.
    No batch input data for screen 'SAPMV60A' '0102' . Error  - 0344. 
    Kindly help me as I was strucked here.
    My code .
        PERFORM bdc_dynpro      USING 'SAPMV60A' '0102'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'KOMFK-VBELN(01)'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_field       USING 'KOMFK-VBELN(01)'
                                      gwa_bdc-vbeln.
        PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'VBRK-FKART'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'VBRK-FKART'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=SICH'.
        REFRESH messtab[].
        CALL TRANSACTION 'VF01' USING bdcdata
                         OPTIONS FROM wa_options
                         MESSAGES INTO messtab.
    Please <removed by moderator> help.
    Thanks ,
    Srikanth.A
    Edited by: Thomas Zloch on Sep 15, 2011 1:47 PM

    Hi Jurgen
      LOOP AT git_bdc INTO gwa_bdc.
       refresh messtab[].
        PERFORM bdc_dynpro      USING 'SAPMV60A' '0102'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'KOMFK-VBELN(01)'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_field       USING 'KOMFK-VBELN(01)'
                                      gwa_bdc-vbeln.
        PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'VBRK-FKART'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'VBRK-FKART'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_dynpro      USING 'SAPMV60A' '0104'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'VBRK-FKART'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=SICH'.
        REFRESH messtab[].
        CALL TRANSACTION 'VF01' USING bdcdata
                         OPTIONS FROM wa_options
                         MESSAGES INTO messtab.
    Error message population....
    REFRESH bdcdata[].
    ENDLOOP.
    Thanks,
    Srikanth.A

  • No batch input data for screen SAPMSSY3 0131 in Sales order IDOC

    I am processing Sales order IDOCS in status 64 using RBDAPP01 .Some of them error out to status 51 with the message -
    No batch input data for screen SAPMSSY3 0131 .
    I know the standard IDOC inbound process tries to simulate the posting in a BDC like process.
    Now, I went to we19 and the screen hangs up in a pop up in the partners tab with partner type 'WE' and my shipto (which is actually filled in the IDOC), missing..upon repeatedly hitting enter, it goes thru and an idoc is posted in status 53. But still unable to get through the root of this issue.
    Any, insight will help.

    Hi,
    I think the pop-up is generated through and user-exit for which recording is missing. This is why your idoc stays in status 64...
    Handle the screen recording in the user exit IDOC_INPUT_ORDERS
    user exit routine
    PERFORM customer_function_dynpro.
    FORM CUSTOMER_FUNCTION_DYNPRO.
      CALL CUSTOMER-FUNCTION '002'
        EXPORTING DXVBAK   = XVBAK
                  DVTCOMAG = VTCOMAG
                  DLAST_DYNPRO = LAST_DYNPRO
                  DXMESCOD = IDOC_CONTRL-MESCOD
        TABLES    DXBDCDATA = BDCDATA
                  DXVBAP    = XVBAP
                  DXVBEP    = XVBEP
                  DYVBEP    = YVBEP
                  DXVBADR   = XVBADR
                  DYVBADR   = YVBADR
                  DXVBPA    = XVBPA
                  DXVBUV    = XVBUV
                  DIDOC_DATA = IDOC_DATA
                  DXKOMV    = XKOMV
                  DXVEKP    = XVEKP
                  DYVEKP    = YVEKP
        EXCEPTIONS
                  USER_ERROR = 01.
    Regards,
    Krishnakumar

  • Error in LSMW for MM41 - "No batch input data for screen SAPLMGMW 0100"

    I'm trying to create an LSMW for MM41 to create new Retail articles en Mass. This will be used to only create the Basic view as other LSMW's already exist to maintain the other views. I've created the Recording and setup the LSMW already. My data is read correctly from the source file. When I execute the batch session it fails with the following error - "No batch input data for screen SAPLMGMW 0100".
    I assume the fields in MM41 screen are not setup for batch processing. Could someone with more knowledge or experience in SAP Retail please confirm my assumption and explain where this is setup or provide an alternative to creating new articles en Mass via MM41? The direct input method is more suited for MM01 and not MM41.
    Regards
    Fawaaz

    Hi Guys,
    Thanks so much for all the prompt responses. My issue is now resolved.
    The issue, I'm sure, was my default settings in the MM41 screen which the recording probably took into account or the batch program didn't like. I deleted my recording and created a new one but before I started the recording, I went into the MM41 screen and removed all default values AND view selections. I made my Basic view selection constant in my recording and also in my field mapping. My LSMW for MM41 is now working perfectly.
    Just to answer some of the questions above, my LSMW was Reading and Converting the data in my source file fine. When I display the Read and Converted data, it shows the data fields in the correct place.
    Thanks again.
    Regards
    Fawaaz

  • Error during gen of subscren container for screens [BP sales,shipping data]

    Hi,
    during the intial download from ECC to CRM ,sales,shipping data is not comming with BP.
    i found one solution for this problm through BUSP transaction to genarate subscrenn container for screens.
    I have genarated everything .But it throws error.
    The error message is
    "Client 101 appl.object BUPA screen $00001:Error during subscreen container gener
    Message no. R11520
    Diagnosis
    Errors have occurred during screen generation. The reasons for this could be:
    The maximum length of the screen was exceeded. There may be no more than 199 lines per subscreen container.
    The maximum number of lines for the header-data area was exceeded. There may be no more than 15 lines in the header-data section.
    Procedure
    Check both of these potential sources of errors in the relevant screen, and make the necessary changes."
    Plz anyone help me to solve this problem.
    regards
    geetha.g

    Hi,
    Even i am facing similar problem like this..
    in my case,
    its working in one clinet and its not able to regenerate successfullu in another client.
    its showing the same above error.
    I tried removing the error by running the report  BDT_VCT_CORR_001 and again generating the screens... but it was of no use..
    can any one sugesst me some other points
    with regards,
    Sumanth

  • "no batch input data for screen SAPLMR!M 6220  in BDC while holding Invoice

    Hi
         I am facing a problem while uploading Invoice data and to hold the data in miro transaction I am getting the error
         "no batch input data for  screen SAPLMR!M  6220 " . It is for non PO data only I am facing this problem using BDC.
         But for  Po based Invoice  I am getting Invoice number while holding the Invoice. I am  Using SHBDB to record the    
          transaction   details
        Please give me some solution regrading this.
    Samir

    Krish ,
                I am doing it in same transaction MIRO  for both  PO and NON-PO. I am able to generate an Invoice number while holding   the Invoice  For NON-PO taking vendor as invoice Party .While I am recording it in SHDB and trying to use the
    same in my BDC Programe it is throughing this error and also by testing the program which has been generated by the 
    SHDB trnasaction i am getting the same Error . Is there any diferrent trnasaction that is used to hold NON_PO invoice ?
    Where Invoice number will be generated automatically ?

  • SE93 - There are no variants for screen 1000

    Hello experts,
    We cannot set variant for report transactions from se93.In our case, system prompts a warning as "There are no variants for screen 1000" But standard system variants (which are starting with CUS& or SAP&) are working fine. However, we can set them if we enter the variant name instead of using f4 input help.
    There are a lot of entries about this issue on SDN but we want to do that on relevant system with using our own variants (using f4 search help) not system variants and I don't know how but we can also create transactions with own variants on different systems without any problem (which have same components and support package level)
    Please note that, problem occurs only in se93 while creating tcode, there is no problem while using existing variants with tcode.
    Please also see the below patch level information of relevant system ; (for core components)
    EHP4 for ERP 6.0                    
    SAP_ABA     701     6     SAPKA70106     Cross-Application Component
    SAP_BASIS     701     6     SAPKB70106     SAP Basis Component
    PI_BASIS     701     6     SAPK-70106INPIBASIS     Basis Plug-In
    ST-PI     2008_1_700     2     SAPKITLRD2     SAP Solution Tools Plug-In
    SAP_BS_FND     701     6     SAPK-70106INSAPBSFND     SAP Business Suite Foundation
    SAP_BW     701     6     SAPKW70106     SAP Business Warehouse
    SAP_AP     700     19     SAPKNA7019     SAP Application Platform
    SAP_APPL     604     6     SAPKH60406     Logistics and Accounting
    Can you please help us on this issue ?
    Thanks in advance.
    Kind regards,
    Alper Ozdemir
    SAP R/3 NetWeaver Consultant

    I have to respectfully disagree - any variant can be assigned to the transaction code.
    Please try the following:
    1) Start your report (I'm assuming it is a report?) in SE38 and create a variant.
    2) In SE38, open the report and open its object list (menu Utilities -> Display Object List)
    3) If you have already created a transaction, you should see the node Transactions in the left-hand window (i.e. object list). Double-click on the transaction name and switch to Change mode. In the field Start with variant type in the variant name from step 1. Note that if you try to use the dropdown it will say "No variants exist...", but if you just type in the name, it will take it.
    Activate and do the same thing with the second transaction or create the new ones, if you prefer. Note that non-system variants will have to be either created in each environment or manually added to the transport. This can also be done in SE38 - click Variant radio-button, click Display, then go to the menu Utilities ->Transport Request and follow the instructions.
    All above may also be done in SE80, I just prefer SE38 personally.

  • ABAP Dictionary type FLTP is not allowed for screen element

    Hi Experts
    I tried to open VBFA in se16 and i got the message in the status bar like this , what does it mean. please explain.
    "ABAP Dictionary type FLTP is not allowed for screen element"

    Hi,
        This is from help
    ABAP Dictionary type FLTP is not allowed for screen element
    Message no. 37048
    <b>Diagnosis</b>
    The format of the ABAP Dictionary field is only for use within the ABAP
    program and cannot be used in the Screen Painter.
    <b>Procedure</b>
    The field cannot be used in screens. If you want to output the
    information in the field or assign a value to the field from the screen,
    you must use an intermediate field with an appropriate format.
    <b>Reward points</b>
    Regards

  • No batch input data for screen SAPMSSY3 0131

    Dear All,
    I have developed a report where i need to upload (old and new)incoterms,payment terms,document type  and update in the table ekko with my new values (incoterms,payment terms and document type).
    Problem :For this report i have uploaded the excel sheet and values are getting uploaded into my internal table.but when using bapi_agreement_maintain to update the ekko table ,in return table its showing No batch input data for screen SAPMSSY3 0131.
    Anyone please give the reason/solution to solve the problem.
    Regards,
    Bhavani.

    Hi,
    screen SAPMSSY3 0131 is the debugging screen so if you have any break-points in any of the transactions remove the breakpoint and check.
    Basically this BAPI is calling a transaction to execute a transaction in no dialog mode so if you have break-points in any of those program you will face this issue.
    Regards,
    Himanshu

  • ABAP Dictionory type FLTP is nt allowed for  screen Painter!!

    Hello All,
    ABAP Dictionary type FLTP is nt allowed for  screen Painter!!  am getting this error message if am giving some input.
    Thanks
    santu
    Edited by: santu4u on Oct 23, 2009 1:48 PM

    Hi
    Instead of FLTP use Quantity or Currency or Packed Decimals type fields for the Screen Elements.
    While you save the data into the database if the database field is of type FLTP the values entered would be automatically converted into FLTP type. We need not take care of this.
    ---?? What do you mean by IDES version --->
    You mean in SE11 or SE16, Wherever it may be you can not use FLTP type on Screen Fields.
    This is Standard SAP Procedure, As mentioned Above you can use Packed Decimals or Currency or Quantity Fields
    Cheers
    Ram
    Edited by: Ramchander Krishnamraju on Oct 23, 2009 2:10 PM
    Edited by: Ramchander Krishnamraju on Oct 23, 2009 2:13 PM

  • How do I create a table with header cell tags for screen readers in indesign cc 2014?

    In order to create a table that's readable for screen readers, I need to give the cols and row values like headers. This way the screen reader should be able to understand what the value in it's corresponding cell is. But... how do do this?

    <http://helpx.adobe.com/pdf/indesign_reference.pdf> Adobe Digital Reader does have a search feature for reading pdfs. Found the TOC instructions on page 176 of 706 pages. 

  • Set "optimize for screen display" at runtime?

    Hi,
    is it possible to set the option "optimize for screen display" at runtime when using the CR2008/.NET 2.0 runtime?
    Best regards,
    Florian

    Ok, I'm a bit smarter now. If I open the new pdf with reader 7 the graphics are in normal size at 100%. If I open the same pdf in Acrobat 9 pro everything is a bit to big with the "original size" setting, so the graphics are blured, because they get streched. It is a problem of displaying, the pdf seems to be ok, cause it looks good printed and good in Reader 7. But how can I know how the result will look at the users screen and why is the same file different in two reader versions?
    and there is still the problem with the pattern / diffusion / noise whatever is the best word for it.

Maybe you are looking for

  • Mozilla firefox wont start because of read confirgaration

    I have reinstalled mozilla firefox and I still have the same problem.It say wont read confiration

  • 100k black exporting to PDF as rich black

    Hey guys, I've rattled my brain for long enough over this issue, it's time to ask the wider community. When I export a pdf with any of my export profiles, all overprint 100k (black swatch) blacks are exported as CMYK. It doesn't matter if it's text o

  • PC will not recognize iphone

    My PC with windows XP will not recognize my iphone. I was able to get it to backup up the phone by installing the latest iOS. Not sure how I managed that. For a while the pc thought thte iphone was a camera. The iphone does not show up in my computer

  • Will Image Capture do this?

    I've been doing some web searching for an answer to this but have yet to discover anything encouraging. So here's my question/problem: I have a nice photo table with a stable crane like rig on the back (Imagine a camera mounted directly overhead look

  • Sending Email

    Dear All, I hv Used utl_mail package for sending mail, with attachement. and its Showing Successfully Send but not reaching the Destination. Codes are below BEGIN utl_mail.send_attach_varchar2 (sender => 'deepak', recipients => '[email protected]', b