Resolution issues in mirror mode with last model of Cinema display and MBP
I have been using my MBP with a 27 inch Cinema display for the last year in mirror mode. (Both prior to Thunderbolt). Today, the cinema display is only coming up in low resolution while mirrored, but if I exit mirro mode, the reolution on the Cinema display is correct. Any suggestions on how to get back to prior state?
Thanks to anyone who responds!
Same issue here. Since upgrade to Snow Leopard, my 24 Cinema LED Display acts weird with closed lid on my Macbook. It doesn't switch on video at all, only audio seems to work. It is correctly plugged with the special power/USB cable that comes/is attached to the 24 Cinema LED. Also booting the Macbook and immediately closing the lid doesn't
No video at all!
Please help, it seems my external display has become useless...
Similar Messages
-
My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi. The iPad displays AirPlay set to TV with the Mirroring On (green).
My iPad IOS software is 8.2 and my Apple TV software is at 7.1. The TV displays the Apple Menu. The “Settings” does however displays the General menu allowing me to see:
Apple software: 7.1 (7003)
Apple TV: Model No. A1464, Part No. MD199B/A
Signal Strength shows 5 circles.
It does not display the iPad screen but when I use the BT Sport App I can hear the sound but there is no video. I have searched the internet for a solution to no avail. The problem first arose when the IOS was at 8.1+ but it worked correctly briefly when I updated to IOS 8.2. Can you help please?Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful. -
Using the Macbook with new LED Apple Cinema Display? Not a beginner's Q...
Hi - I'm sort of cross-posting this because I'm not getting any answers in the Apple Cinema Display Forum, so here goes. So far, no one - not even a tech guy at a local Apple Reseller - has been able to help, so I've got my fingers crossed.
I just got a 24" Apple LED Cinema Display and am using it with my 13" Aluminum Unibody Macbook. What I do is dock the Macbook (with closed screen) when at home with the big display and just use that. I enlarge program windows and arrange the layout (in different spaces) to take advantage of the large screen and resolution. So far so good.
But I'm a student and take my macbook with me to class. When I open it up, all the program windows are set as they were on the larger screen, which means some are out of view or simply not well-adjusted for the smaller and lower resolution of the Macbook. I manually adjust these and work on the Macbook that way.
But when I return home in the evening, I have to adjust them again once I 'dock' the Macbook. Kind of a pain if I'm doing this twice a day.
What I'd like to know is: is there a setting or group of settings that would do this automatically for me? A program? An AppleScript? Surely someone out there has had the same issues and has found a fix, if such a thing exists. Or is it just a fact of nature one deals with when working on two screens?
To preclude one response: yes, I know I can mirror the displays when I open the Macbook along with the LED Cinema Display. But this simply mirrors them using the lower resolution and dimensions of the Macbook screen. And that kind of negates having the larger, Cinema Display.
So - any thoughts? Solutions? How do you guys manage with this?
Thanks,
JeffI don't really have a solution for you but wanted to link you to a discussion on this very topic that took place last month on MacInTouch.
http://www.macintouch.com/readerreports/helpplease/topic3939.html#d24sep2009
The conclusion seemed to be that it is not an OS issue, it's an application issue. There really was no good answer but some good insight into why the problem exists and why it may not be something Apple can fix. -
Adjusting brightness with two 24" LED Cinema Displays
I'm wondering if there are any other Mac Pro users out there with two 24" LED Cinema Displays? If so, are you able to adjust the brightness of both displays? For me, no matter which brightness slider I adjust in System Preferences, only the brightness of one of the displays is adjusted.
I originally created a thread last September:
http://discussions.apple.com/thread.jspa?threadID=2160532
If you have this problem too, please report it to <http://bugreporter.apple.com/>. My original Radar bug was #7222745, and it was found to be a duplicate of #6828443. Based on the IDs, I'd say this has been a known issue for at least a year.
Thanks,
PatrickI filed a bug report at bugreporter.apple.com, and received a pretty quick reply:
This is a follow up to Bug ID# 7222745. After further investigation it has been determined that this is a known issue, which is currently being investigated by engineering. This issue has been filed in our bug database under the original Bug ID# 6828443. The original bug number being used to track this duplicate issue can be found in the State column, in this format: Duplicate/OrigBug#.
Looks like I'm S.O.L. until they fix this! -
I use my MBP 15 (late 2011) with 24" Apple LED Cinema display in a clamshell mode. After disconnecting external display, and opening display, it shows horizontal shifted bars, so it becomes completely unusable. Have to hard reset laptop. Any hints on how to resolve this? Thanks.
Ok, more information for anyone that might care. The wake-up seems to be the familiar dark wake in order to go into hibernate mode. Except now, it's a death wake. Looking at the logs, I see that it happens exactly 70 minutes after sleeping, even though hibernatemode = 0 (which shouldn't hibernate at all!)
So my power settings look like this:
Currently in use:
standbydelay 4200
standby 1
halfdim 1
hibernatefile /var/vm/sleepimage
darkwakes 0
gpuswitch 2
disksleep 10
sleep 10
autopoweroffdelay 14400
hibernatemode 0
autopoweroff 1
ttyskeepawake 1
displaysleep 2
acwake 0
lidwake 1
standbymode is 70 minutes, what a coincidence. I'm going to try setting it to 0 and see what that does. -
Will my MBA work with the new LED Cinema Display
I have a first generation MBA, model identifier MBA 1.1, and want to know if my mini display adapter will work with the new LED Cinema Display. I believe I have a micro-DVI that is different from the new MacBooks and MacBook Professional models that have a new Mini DisplayPort. If anyone is using this old MBA to new LED Cinema Display combination please let me know.
Scott,
The new display isn't shipping from Apple until some time in November so the only direct feedback you'll get is from anyone that's been to the store and played with the demo unit.
With that being said, it would appear (based on the system specs and requirements, posted on the site) that the new display requires the new adapter type that's found only on the new MacBook, MacBook Pro and MacBook Air. -
My macbook pro is just back from repairs. It is not working with my apple led cinema display. I have followed the directions in the cinema display manual. am I missing something?
Take a look at the Displays preference panel to see if everything is ok, particularly the resolution and refresh rate. Displays will probably try to put the panel for the ACD on the ACD where you won't see it. So click "Gather Windows" to get the ACD panel on to your macbook.
One more thing, make sure you fully seated the mini displayport plug. They can be sneaky little devils in that they need to be fully pushed in. -
Share Cinema Display and peripherals with MBP and PC
Share Cinema Display and peripherals with MBP and PC
I am about to be forced to use a business network connected PC in my office, but I will continue to bring my personal MacBook Pro to work for my personal e-mail, calendar, internet, etc. (it will be connected to a seperate open DSL network). I am thinking about getting an Apple Cinema display and trying to use this one display for both computers. I would like a way to "switch back and forth" between the two systems, all the while using the same mouse, keyboard, printer and Cinema display.
Does anyone have any experience setting up what I am wanting to do?
Also, how does connecting an external display effect a MBP? Can you close the screen on the MBP, turning off the MBP's display but keeping the computer running? I'd like to be able to tuck the MBP out of the way to save deskspace but still be using it via the Cinema display and peripherals...
Thanks so much!You can use synergy (link: http://synergy2.sourceforge.net/) to link the mouse and keyboard across the two platforms.
If you want to use only one display, you'll need a KVM switch.
You can run the MBP either with it's own screen open, or shut it and use only the external screen.
Hopefully this helps a little... -
After I disconnect from the cinema display and than a few minutes later open up the macbook without the display connected, things are fine. But re-connecting to the display, all the screens are moved and/or changed in size. Anybody any ideas ?
I'm currently sitting in my office using my MBP and looking at a 24" Samsung display. At home I replaced my 4 year old iMac with a 2 year old 13" MBP which is connected to a similar display. That should be tell you all you need to know!
-
my iphone 3gs keeps showing the screen with the connect to itunes display, and I've restored it multiple times on different computers, but everytime it finishes restoring, it shows the display again and the computer says it needs to be restored. can anybody help me with this?
it was saying error code 1, i tried the things it said but none of it worked. now it is not showing an error code at all, it just keeps saying it needs to be restored.
-
Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problemsLook, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
Make sure SD DVD is selected:
(If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
Build your DVD and you'll be fine.
Patrick
P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely. -
Is it possible to have the lid open on a MacBook Pro connected to a Cinema Display and have the Mac display blank with the Cinema in highest definition?
Hi,
Create a play list that you wish to burn. Select playlist, the file from main menu which gives to an option to burn the playlist. A pop up box appears allowing you to select burn speed and disc format.
Jim -
My Ipad is showing no display and is in assistive touch mode, My Ipad is showing no display and is in assistive touch mode, My Ipad is showing no display and is in assistive touch mode
Thanks, I can't get to settings. Siri tells me the screen is locked!
-
Help! Strange Problem with 23" Apple Cinema Display and Wireless Internet
For some reason, Safari runs much much slower on my housemates new 23" Apple Cinema Display than just on his new Macbook. He is running Tiger. We use Airport Extreme for house-wide wireless, and he has an Airport Express to connect to his printer. Here is what he wrote:
"Last night, I was watching videos on ABC.com --- not a problem to watch on my laptop screen (new Macbook) - very fast. Then, after dinner, I plugged in my external screen (Apple Cinema Display), and it was so slow and wouldn't load. I unplugged the screen, and it was lighting fast again, so I watched the videos on my laptop screen. This morning, I was plugged into the external monitor and the Internet was slow to check my email. I unplugged the screen, and it's lightning fast now on my laptop screen.
Does this make any sense??? Why would my external monitor affect the Internet speed? "I am having a similar problem as well. When I attach my 23" cinema display to my MacBook core 2 duo, my connection to the internet immediately stops working. I have tested this several times and it happens every time I connect the Cinema Display to my MacBook. When I disconnect the Cinema Display, my internet connection works perfectly again. I'm stumped as to why this happens.
I have tried several different searches on the forums, but have found no other threads besides this one. I'm I won't have to suck it up and pay the $50 for the call to AppleCare support. -
Are intel iMacs compatible with the M9177B/A cinema display
Are intel iMacs compatible with the M9177B/A cinema display please?
That Display has DVI input. So if you have a 2009 iMac with MiniDisplay port output as your profile suggest's...?
Then you will need a > Mini DisplayPort to DVI Adapter - Apple Store (U.S.) and maybe a DVI cable if one is not with the monitor.
Maybe you are looking for
-
Perhaps this is more of a Windows question, but I haven't been able to find anything on it. I just got a new Machine (new to me anyway) with Windows 7 Professional. On my old computer (Windows XP) was set up to open PDF files with Illustrator automat
-
Web Gallery - need file name on thumbnail and large image
I think I have tried all the CS3 templates, but haven't found what our client is requesting. Is there a template that shows the file name on both the thumbnail and large image, and will make large images of 600-800 pixels (long dimension)? Thanks in
-
Able to download music w/video onto my computer but...not from computer to iPod Mini. Help Needed and Thanks. Mini Windows 2000
-
hello one and all, i have a mac mini early 2006, not an intel mac. im running mac os x 10.3.7 and would like to upgrade to 10.4 and have the installation dvd. ok here is the problem. i have read elsewhere that i first need to upgrade classic 9 to cla
-
Error in running the WD application.
Hi experts , I am getting an error when running an webdynpro application i.e URL : http://sapserver:8006/sap/bc/webdynpro/sap/zwd_spo_sr?sap-system-login-basic_auth=X&sap-client=800&sap-language=EN Error : Die URL enthält keine vollständige Domainang