Resolution Lowered When Waking Up in 10.8.3?

Hi!
I'm wondering if anyone has seen an issue with their Mac when it wakes up from idle/sleep in 10.8.3. For the past couple days, when I wake my Mac mini up from idle or sleep, it drops the resolution down and the only thing that resolves the issue is a reboot. However, as soon as it goes back to idle or sleep, it happens again. The only change I've made since installing 10.8.3 is pairing a Magic Trackpad to my Mac.
Any assistance would be most welcome. Thanks!

Resetting NVRAM (PRAM) did not help for me either.
Essentially, sometimes the Mac does not recognize the particular monitor when it wakes from sleep, but rather only recongizes that some sort of VGA Monitor is there, and goes to generic VGA Monitor Settings.
I found a workaround (but not a true fix) to this problem. It doesn't truly fix the probelm, but it makes it livable.
See my post on Apple Discussion boards: https://discussions.apple.com/message/22194581#22194581

Similar Messages

  • Resolution change when waking from Sleep

    I will at times hook up my MBP to a plasma display to show photos. Now-sometimes when waking from sleep (and not attached to an external monitor), it reverts back to 800x600. I have to go to SP to displays and re-detect the MacBook display. Unpredictable and frustrating.

    Lets get a few details straightened out first:
    1. What cable are you using to connect? DVI, VGA, HDMI, component, composite, s-video, etc.?
    2. What resolution is it when you connect? If your plasma is an HDTV, it is capable of taking much higher than 800x600, so depending on the cable you use, you can adjust that to make it higher or even the same native resolution.
    3. When you disconnect, is the computer running, or closed/sleeping? If you close, then disconnect, it might think the display is still connected. Or, rather, after switching resolutions back, later on when you open it up it suddly changes to a lower res?
    In the meantime, in system prefs, in "Displays" check the box that says "Show displays in menu bar" and then you will get a menu up top to choose your displays and resolution sizes. That will at least make it easier to change.

  • Keychain is read-only when waking from sleep

    So, when waking from sleep my keychain becomes read-only and I'm forced to restart since many of the applications I tend to use (itunes, safari, skype. messages and disk utility) start giving me error messages or are unresponsive. I've tried repairing the keychain, deleting and creating a new keychain, reinstalling the OS (10.8), resetting the ACLs using the recovery partition, repairing permissions using the recovery partition. The only thing I haven't tried is wiping out the drive and installing the OS anew which I would like to avoid . I am on a 2010 13" macbook pro using 10.8.3. I don't think it started after an update. I did recently install a new hard drive since the previous hard drive died. I used time machine to restore my apps and user account. Advice anyone? Thanks

    Hello-
    Well I spoke to soon. The problem started a few weeks later. Since then I have installed the OS on to a new hard drive. I did import my user account from a time machine backup but did not import the Apps and System settings. I created a new account and moved my media and documents from my old account to the new account. I then deleted the old account. After all that I am still getting the read-only problem with Keychain. It now happens while I am using my laptop, not just when it wakes from sleep. As I mentioned before the issue is intermittent, about once or twice a week. The last occurrence happened a few minutes after I booted up. I have pasted the log below. I have taken it in to Apple and they ran a check-up and everything came back ok. I'm concerned because my apple care ends in about a week. Any advice you can give would be greatly appreciated. Thanks.
    7/10/13 6:52:39.000 AM bootlog[0]: BOOT_TIME 1373464359 0
    7/10/13 6:53:06.000 AM kernel[0]: Darwin Kernel Version 12.4.0: Wed May  1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
    7/10/13 6:53:06.000 AM kernel[0]: vm_page_bootstrap: 1944529 free pages and 70703 wired pages
    7/10/13 6:53:06.000 AM kernel[0]: kext submap [0xffffff7f80737000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000737000]
    7/10/13 6:53:06.000 AM kernel[0]: zone leak detection enabled
    7/10/13 6:53:06.000 AM kernel[0]: standard timeslicing quantum is 10000 us
    7/10/13 6:53:06.000 AM kernel[0]: standard background quantum is 2500 us
    7/10/13 6:53:06.000 AM kernel[0]: mig_table_max_displ = 74
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto kext started!
    7/10/13 6:53:06.000 AM kernel[0]: Running kernel space in FIPS MODE
    7/10/13 6:53:06.000 AM kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    7/10/13 6:53:06.000 AM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
    7/10/13 6:53:06.000 AM kernel[0]: corecrypto.kext FIPS POST passed!
    7/10/13 6:53:06.000 AM kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
    7/10/13 6:53:06.000 AM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
    7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for TMSafetyNet
    7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for Sandbox
    7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    7/10/13 6:53:06.000 AM kernel[0]: calling mpo_policy_init for Quarantine
    7/10/13 6:53:06.000 AM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    7/10/13 6:53:06.000 AM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    7/10/13 6:53:06.000 AM kernel[0]: The Regents of the University of California. All rights reserved.
    7/10/13 6:53:06.000 AM kernel[0]: MAC Framework successfully initialized
    7/10/13 6:53:06.000 AM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    7/10/13 6:53:06.000 AM kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
    7/10/13 6:53:06.000 AM kernel[0]: ACPI: System State [S0 S3 S4 S5]
    7/10/13 6:53:06.000 AM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
    7/10/13 6:53:06.000 AM kernel[0]: [ PCI configuration begin ]
    7/10/13 6:53:06.000 AM kernel[0]: console relocated to 0xf80010000
    7/10/13 6:53:06.000 AM kernel[0]: PCI configuration changed (bridge=1 device=1 cardbus=0)
    7/10/13 6:53:06.000 AM kernel[0]: [ PCI configuration end, bridges 5 devices 24 ]
    7/10/13 6:53:06.000 AM kernel[0]: AppleIntelCPUPowerManagement: (built 18:11:47 May  1 2013) initialization complete
    7/10/13 6:53:06.000 AM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 78ca39fffe131078; max speed s800.
    7/10/13 6:53:06.000 AM kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
    7/10/13 6:53:06.000 AM kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
    7/10/13 6:53:06.000 AM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    7/10/13 6:53:06.000 AM kernel[0]: rooting via boot-uuid from /chosen: F24E7B60-8654-3521-9DC6-9CA2F1979476
    7/10/13 6:53:06.000 AM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    7/10/13 6:53:06.000 AM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    7/10/13 6:53:06.000 AM kernel[0]: AppleIntelCPUPowerManagementClient: ready
    7/10/13 6:53:06.000 AM kernel[0]: BTCOEXIST off
    7/10/13 6:53:06.000 AM kernel[0]: BRCM tunables:
    7/10/13 6:53:06.000 AM kernel[0]: pullmode[1] txringsize[  256] txsendqsize[1024] reapmin[   32] reapcount[  128]
    7/10/13 6:53:06.000 AM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@A/AppleMCP89AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9750420AS Media/IOGUIDPartitionScheme/Untitled 1@2
    7/10/13 6:53:06.000 AM kernel[0]: BSD root: disk0s2, major 1, minor 2
    7/10/13 6:53:06.000 AM kernel[0]: Kernel is LP64
    7/10/13 6:52:40.694 AM com.apple.launchd[1]: *** launchd[1] has started up. ***
    7/10/13 6:52:40.694 AM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    7/10/13 6:53:06.879 AM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
    7/10/13 6:53:08.000 AM kernel[0]: BCM5701Enet: Ethernet address c4:2c:03:34:56:ec
    7/10/13 6:53:08.000 AM kernel[0]: AirPort_Brcm4331: Ethernet address f8:1e:df:ea:54:f5
    7/10/13 6:53:08.000 AM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    7/10/13 6:53:08.000 AM kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    7/10/13 6:53:09.000 AM kernel[0]: IOBluetoothUSBDFU::probe
    7/10/13 6:53:09.000 AM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8213 FirmwareVersion - 0x0201
    7/10/13 6:53:09.000 AM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController][start] -- completed
    7/10/13 6:53:09.000 AM kernel[0]: Previous Shutdown Cause: 5
    7/10/13 6:53:09.000 AM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    7/10/13 6:53:09.000 AM kernel[0]: NVDAStartup: Official
    7/10/13 6:53:09.000 AM kernel[0]: NVDANV50HAL loaded and registered
    7/10/13 6:53:09.519 AM com.apple.SecurityServer[15]: Session 100000 created
    7/10/13 6:53:10.000 AM kernel[0]: DSMOS has arrived
    7/10/13 6:53:11.454 AM airportd[27]: _processDLILEvent: en1 attached (down)
    7/10/13 6:53:11.000 AM kernel[0]: createVirtIf(): ifRole = 1
    7/10/13 6:53:11.000 AM kernel[0]: in func createVirtualInterface ifRole = 1
    7/10/13 6:53:11.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff8017662400
    7/10/13 6:53:11.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
    7/10/13 6:53:11.000 AM kernel[0]: Created virtif 0xffffff8017662400 p2p0
    7/10/13 6:53:11.941 AM hidd[56]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    7/10/13 6:53:13.000 AM kernel[0]: macx_swapon SUCCESS
    7/10/13 6:53:14.349 AM configd[18]: setting hostname to "Pluto.local"
    7/10/13 6:53:14.000 AM kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
    7/10/13 6:53:14.000 AM kernel[0]: en1::IO80211Interface::postMessage bssid changed
    7/10/13 6:53:14.354 AM configd[18]: network changed.
    7/10/13 6:53:18.272 AM com.apple.SecurityServer[15]: Entering service
    7/10/13 6:53:18.519 AM blued[65]: Read the UHE Info
    7/10/13 6:53:18.519 AM blued[65]: Read version 2 info.  Number of devices:2
    7/10/13 6:53:18.519 AM blued[65]: Class of device:     0x2580
    7/10/13 6:53:18.519 AM blued[65]: Device name: 'ervin's' length:8
    7/10/13 6:53:18.519 AM blued[65]: Finished reading the HID data
    7/10/13 6:53:18.519 AM blued[65]: Found a device with PID:0x030d VID:0x05ac
    7/10/13 6:53:18.520 AM blued[65]: Class of device:     0x2540
    7/10/13 6:53:18.520 AM blued[65]: Device name: 'ervinsiax’s Keyboard' length:23
    7/10/13 6:53:18.520 AM blued[65]: Finished reading the HID data
    7/10/13 6:53:18.521 AM blued[65]: Found a device with PID:0x0255 VID:0x05ac
    7/10/13 6:53:18.987 AM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
    7/10/13 6:53:18.993 AM loginwindow[51]: Login Window Application Started
    7/10/13 6:53:20.506 AM awacsd[66]: Starting awacsd connectivity-78.3 (Apr 25 2013 19:22:44)
    7/10/13 6:53:20.510 AM awacsd[66]: InnerStore CopyAllZones: no info in Dynamic Store
    7/10/13 6:53:20.635 AM kdc[54]: label: default
    7/10/13 6:53:20.635 AM kdc[54]: dbname: od:/Local/Default
    7/10/13 6:53:20.635 AM kdc[54]: mkey_file: /var/db/krb5kdc/m-key
    7/10/13 6:53:20.635 AM kdc[54]: acl_file: /var/db/krb5kdc/kadmind.acl
    7/10/13 6:53:20.673 AM mDNSResponder[48]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12
    7/10/13 6:53:21.537 AM coreservicesd[70]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
    7/10/13 6:53:21.539 AM mds[47]: (Normal) FMW: FMW 0 0
    7/10/13 6:53:21.836 AM appleeventsd[62]: main: Starting up
    7/10/13 6:53:21.865 AM com.apple.usbmuxd[36]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
    7/10/13 6:53:23.268 AM aosnotifyd[85]: bootstrap_look_up failed (44e)
    7/10/13 6:53:24.487 AM netbiosd[69]: Unable to start NetBIOS name service:
    7/10/13 6:53:24.499 AM digest-service[87]: label: default
    7/10/13 6:53:24.499 AM digest-service[87]: dbname: od:/Local/Default
    7/10/13 6:53:24.499 AM digest-service[87]: mkey_file: /var/db/krb5kdc/m-key
    7/10/13 6:53:24.499 AM digest-service[87]: acl_file: /var/db/krb5kdc/kadmind.acl
    7/10/13 6:53:24.501 AM digest-service[87]: digest-request: uid=0
    7/10/13 6:53:24.532 AM rpcsvchost[88]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
    7/10/13 6:53:24.538 AM digest-service[87]: digest-request: init request
    7/10/13 6:53:24.544 AM digest-service[87]: digest-request: init return domain: BUILTIN server: PLUTO
    7/10/13 6:53:25.353 AM systemkeychain[75]: done file: /var/run/systemkeychaincheck.done
    7/10/13 6:53:25.374 AM kdc[54]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
    7/10/13 6:53:25.387 AM configd[18]: network changed: DNS*
    7/10/13 6:53:25.393 AM mDNSResponder[48]: D2D_IPC: Loaded
    7/10/13 6:53:25.393 AM mDNSResponder[48]: D2DInitialize succeeded
    7/10/13 6:53:25.396 AM configd[18]: network changed: DNS*
    7/10/13 6:53:25.398 AM mDNSResponder[48]: Adding registration domain 40041775.members.btmm.icloud.com.
    7/10/13 6:53:25.671 AM kdc[54]: KDC started
    7/10/13 6:53:26.235 AM WindowServer[71]: Server is starting up
    7/10/13 6:53:26.652 AM locationd[52]: NOTICE,Location icon should now be in state 0
    7/10/13 6:53:27.102 AM awacsd[66]: Configuring lazy AWACS client: 40041775.p03.members.btmm.icloud.com.
    7/10/13 6:53:28.499 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    7/10/13 6:53:28.500 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    7/10/13 6:53:28.598 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    7/10/13 6:53:28.599 AM apsd[68]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    7/10/13 6:53:28.618 AM awacsd[66]: KV HTTP 0
    7/10/13 6:53:28.908 AM WindowServer[71]: Session 256 retained (2 references)
    7/10/13 6:53:28.908 AM WindowServer[71]: Session 256 released (1 references)
    7/10/13 6:53:30.969 AM WindowServer[71]: Session 256 retained (2 references)
    7/10/13 6:53:30.970 AM WindowServer[71]: init_page_flip: page flip mode is on
    7/10/13 6:53:31.409 AM WindowServer[71]: mux_initialize: Couldn't find any matches
    7/10/13 6:53:31.426 AM WindowServer[71]: GLCompositor enabled for tile size [256 x 256]
    7/10/13 6:53:31.426 AM WindowServer[71]: CGXGLInitMipMap: mip map mode is on
    7/10/13 6:53:33.627 AM awacsd[66]: KV HTTP 0
    7/10/13 6:53:34.283 AM WindowServer[71]: WSMachineUsesNewStyleMirroring: false
    7/10/13 6:53:34.283 AM WindowServer[71]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    7/10/13 6:53:34.283 AM WindowServer[71]: Display 0x042730c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 27 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc3, S/N 0, Unit 0, Rotation 0
    UUID 0x0000061000009cc300000000042730c0
    7/10/13 6:53:34.284 AM WindowServer[71]: Created shield window 0x5 for display 0x003f003d
    7/10/13 6:53:34.288 AM WindowServer[71]: Created shield window 0x6 for display 0x042730c0
    7/10/13 6:53:35.073 AM WindowServer[71]: Display 0x042730c0: GL mask 0x1; bounds (0, 0)[1280 x 800], 27 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cc3, S/N 0, Unit 0, Rotation 0
    UUID 0x0000061000009cc300000000042730c0
    7/10/13 6:53:35.073 AM WindowServer[71]: Display 0x003f003d: GL mask 0x2; bounds (2304, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    7/10/13 6:53:35.073 AM WindowServer[71]: CGXPerformInitialDisplayConfiguration
    7/10/13 6:53:35.073 AM WindowServer[71]:   Display 0x042730c0: MappedDisplay Unit 0; Vendor 0x610 Model 0x9cc3 S/N 0 Dimensions 11.26 x 7.05; online enabled built-in, Bounds (0,0)[1280 x 800], Rotation 0, Resolution 1
    7/10/13 6:53:35.073 AM WindowServer[71]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
    7/10/13 6:53:36.423 AM WindowServer[71]: GLCompositor: GL renderer id 0x0102261a, GL mask 0x00000003, accelerator 0x00003c8b, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
    7/10/13 6:53:36.433 AM WindowServer[71]: GLCompositor: GL renderer id 0x0102261a, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
    7/10/13 6:53:36.436 AM loginwindow[51]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    7/10/13 6:53:36.454 AM hidd[56]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
    7/10/13 6:53:36.607 AM WindowServer[71]: Unable to open IOHIDSystem (e00002bd)
    7/10/13 6:53:36.000 AM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
    7/10/13 6:53:37.536 AM WindowServer[71]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    7/10/13 6:53:39.901 AM fseventsd[57]: Logging disabled completely for device:1: /Volumes/Recovery HD
    7/10/13 6:53:43.565 AM WindowServer[71]: Created shield window 0x7 for display 0x042730c0
    7/10/13 6:53:43.566 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    7/10/13 6:53:43.586 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    7/10/13 6:53:43.635 AM awacsd[66]: KV HTTP 0
    7/10/13 6:53:43.927 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    7/10/13 6:53:43.979 AM launchctl[124]: com.apple.findmymacmessenger: Already loaded
    7/10/13 6:53:44.003 AM com.apple.SecurityServer[15]: Session 100004 created
    7/10/13 6:53:44.146 AM hidd[56]: CGSShutdownServerConnections: Detaching application from window server
    7/10/13 6:53:44.147 AM hidd[56]: CGSDisplayServerShutdown: Detaching display subsystem from window server
    7/10/13 6:53:44.186 AM loginwindow[51]: Login Window Started Security Agent
    7/10/13 6:53:44.361 AM SecurityAgent[133]: This is the first run
    7/10/13 6:53:44.362 AM SecurityAgent[133]: MacBuddy was run = 0
    7/10/13 6:53:44.367 AM coreaudiod[134]: Enabled automatic stack shots because audio IO is inactive
    7/10/13 6:53:45.276 AM UserEventAgent[125]: cannot find useragent 1102
    7/10/13 6:53:46.754 AM SecurityAgent[133]: spawn_via_launchd() failed, errno=5 label=[0x0-0x7007].com.apple.AppleSpell path=/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell flags=0
    7/10/13 6:53:46.754 AM SecurityAgent[133]: spawn_via_launchd() failed, errno=5 label=[0x0-0x7007].com.apple.AppleSpell path=/System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell flags=0
    7/10/13 6:53:50.000 AM kernel[0]: USBMSC Identifier (non-unique): 20080718000003 0x928 0xa 0x0
    7/10/13 6:53:53.435 AM _netbios[143]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds
    7/10/13 6:53:53.790 AM _netbios[146]: Unable to resolve hostname(s)
    7/10/13 6:53:53.808 AM ntpd[81]: proto: precision = 1.000 usec
    7/10/13 6:54:02.217 AM SecurityAgent[133]: User info context values set for ervin
    7/10/13 6:54:02.657 AM SecurityAgent[133]: Login Window login proceeding
    7/10/13 6:54:03.085 AM loginwindow[51]: Login Window - Returned from Security Agent
    7/10/13 6:54:03.132 AM loginwindow[51]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
    7/10/13 6:54:03.148 AM loginwindow[51]: USER_PROCESS: 51 console
    7/10/13 6:54:03.329 AM com.apple.launchd.peruser.503[149]: (com.apple.gamed) Ignored this key: UserName
    7/10/13 6:54:03.329 AM com.apple.launchd.peruser.503[149]: (com.apple.gamed) Ignored this key: GroupName
    7/10/13 6:54:03.330 AM com.apple.launchd.peruser.503[149]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    7/10/13 6:54:03.337 AM loginwindow[51]: Connection with distnoted server was invalidated
    7/10/13 6:54:03.375 AM distnoted[153]: # distnote server agent  absolute time: 85.254455240   civil time: Wed Jul 10 06:54:03 2013   pid: 153 uid: 503  root: no
    7/10/13 6:54:03.640 AM awacsd[66]: KV HTTP 0
    7/10/13 6:54:04.135 AM blued[65]: kBTXPCUpdateUserPreferences gConsoleUserUID = 503
    7/10/13 6:54:04.868 AM com.apple.SecurityServer[15]: Session 100007 created
    7/10/13 6:54:07.730 AM WindowServer[71]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    7/10/13 6:54:07.934 AM WindowServer[71]: Display 0x042730c0: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    7/10/13 6:54:08.208 AM NetworkBrowserAgent[184]: Starting NetworkBrowserAgent
    7/10/13 6:54:08.867 AM talagent[177]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, _kLSApplicationIsHiddenKey, hidden ? kCFBooleanTrue : kCFBooleanFalse, NULL) produced OSStatus -50 on line 623 in TCApplication.m
    7/10/13 6:54:08.868 AM talagent[177]: _LSSetApplicationInformationItem(kLSDefaultSessionID, asn, TAL_kLSIsProxiedForTALKey, kCFBooleanTrue, NULL) produced OSStatus -50 on line 626 in TCApplication.m
    7/10/13 6:54:09.311 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
    7/10/13 6:54:09.357 AM coreservicesd[70]: Can't change an application into stopped state for app App:"iTunes" [ 0x0/0xa00a]  @ 0x0x7fe8b9e31660 because it's already been started.
    7/10/13 6:54:09.521 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
    7/10/13 6:54:09.000 AM kernel[0]: NTFS driver 3.10 [Flags: R/W].
    7/10/13 6:54:09.000 AM kernel[0]: NTFS volume name , version 3.1.
    7/10/13 6:54:09.000 AM kernel[0]: NTFS-fs warning (device /dev/disk1s1, pid 188): ntfs_system_inodes_get(): $LogFile is not clean.  Will not be able to remount read-write.  Mount in Windows.
    7/10/13 6:54:12.043 AM WindowServer[71]: kCGErrorNotImplemented: receive_notification: CPXSetEventFilter failed
    7/10/13 6:54:16.235 AM WindowServer[71]: CGXDisableUpdate: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
    7/10/13 6:54:16.249 AM WindowServer[71]: reenable_update_for_connection: UI updates were finally reenabled by application "Finder" after 1.01 seconds (server forcibly re-enabled them after 1.00 seconds)
    7/10/13 6:54:17.067 AM SystemUIServer[178]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    7/10/13 6:54:17.067 AM SystemUIServer[178]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    7/10/13 6:54:24.396 AM CalendarAgent[190]: [com.apple.calendar.store.log.caldav.queue] [Got error on refresh, but not rectifying principal because it was manually configured: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f9c328d8100 {NSUnderlyingError=0x7f9c32891880 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSErrorFailingURLKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSLocalizedDescription=The Internet connection appears to be offline.}]
    7/10/13 6:54:24.426 AM CalendarAgent[190]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f9c328da810 {NSUnderlyingError=0x7f9c32891880 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://ervin.siax%[email protected]/calendar/dav/ervin.siax%40gma il.com/user///ervin.siax%[email protected]/calendar/dav/ervin.siax%40gmail.com/user/, NSErrorFailingURLKey=

  • When waking up from standby, monitors power up but no picture is displayed. HP ENVY Phoenix h9

    Product: HP ENVY Phoenix h9 PC Series
    Product #: H3Y51AA#BL
    Model: h9-1387
    OS: Windows 8 64-bit
    Monitors: DELL 2407WFPHC x 2
    Updated graphics drivers to latest non-beta version.
    Hello,
    Since purchasing my PC a few months ago, there has been one "display" problem after another. This is the current problem:
    When stepping away from my computer, I lock it via Win+L and shortly after my monitors turn off. When returning a short time later, I attempt to wake up (But not really "wake up"... To try and fix previous display problems, I've already disabled hibernation and sleep options) my computer by moving my mouse. This causes the monitors to exit standby and power up, but all that is dispalyed is black screens when I should have been presented with the login screen.
    Mouse and keyboard clicks do nothing and I'm stuck at black screens. To continue, I press my PC's power button which causes the hard drives to spin-up and shortly after the computer turns off. I press the power button again and the computer boots to the login screen where once I enter my password, Windows loads and all my programs etc are displayed as they were before I locked my PC.
    You can see previous problems I've had listed below, hopefully they will also help you detect the cause of the current problem.
    Please help.
    Thanks!
    Peter
    Previous problems that I've had:
    1) When waking from hibernation, the computer would not wake monitors from standby leaving no way to login and save work. Hard reboot required. Solution: Disable Windows hibernation features.
    2) Error along the lines of "Display driver failed and have recovered". Possible solution: Disabled hardware acceleration in Firefox.
    3) When waking from standby, I find my 2 monitors have merged into one, and at a different resolution than normal. Once entering password to login, programs that were on seperate monitors are now on the same monitor. Right-clicking the desktop and selecting "Screen Resolution" -> "Detect" would set the monitors back to normal until the problem occurs again. Possible solution: Updated graphics card driver. Not sure if this problem has been fixed, it may have just been covered up by the new problem mentioned above.
    This question was solved.
    View Solution.

    Hey peterallcdn, 
    I'm sorry you're running into this resuming from sleep issue. Sometimes services that are trying to resume can cause issues like this. I would suggest trying a clean boot (booting with only essential system services running) and then seeing if it resumes from sleep properly.
    Here are the steps to disable non-critical services:
    1. Windows + Q to bring up Search
    2. Type 'msconfig' and press Enter
    3. Click the Services Tab
    4. Check the Hide All Microsoft Services box 
    5. Click the Disable All button 
    6. Click Apply and Restart
    When you restart Windows should only load essential system services, no 3rd party software. Lock the computer and let it go into sleep mode as you usually do and then try to resume from sleep. Let  me know what the result of that is.
    I have seen other cases where Google Talk or antivirus programs will prevent the computer from resuming properly.

  • Detect display when waking from sleep?

    Is there any way to force the display detection when waking from sleep? I find that if the mini wakes before the monitor is on, i get a blank screen. When the monitor is on before waking, everything is normal.
    I have the DVI-Detective, and the problem is actually worse when using it -- nothing is detected when waking up, no matter if the display is on or not.
    My specs:
    OS 10.5
    C2D, 2Ghz - 2GB RAM
    Sharp Aquos 52inch
    All standard HD resolutions work fine - it's just now a matter if figuring out how to force the mini to detect the display...
    Surely there must be a way to do this?

    Great that you got it working. It seems what is happening when the TV is switched off is that the Mac can no longer see the EDID data. Basically, it's the same as if a hot-unplug event had occurred from OS X's perspective. The mini thinks the TV's video cable has been unplugged, so it thinks it is running headless, which of course it is not. And for some reason not completely clear to me, when the TV's power is restored, a hot-replug event is not triggered and the mini still thinks it's running headless. Maybe you are right that it is removed from the list of connected devices for good. But it isn't supposed to work like that.
    The DVI Detective is the right tool for the job in cases like this, so it's good you have one and it's good you got it working. I agree it would be nice if there was more override control within OS X for times like this when things go wrong. But if more TV and 2nd/3rd tier monitor makers paid more attention to computer plug-and-play, then these things would work right in the first place. Your TV is in violation of the plug-and-play standard because the standard calls for the host (Mac mini in this case) to be able to power the ROM and I2C bus within the TV even if the TV is in a powered down state. Clearly your TV isn't doing this.

  • Has anyone else noticed that: "The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that: Resolve a Wi-Fi connection issue when waking from sleep" didn't work?

    I installed OS X Lion v10.7.3 because of the following claim.
    The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that:
    Resolve a Wi-Fi connection issue when waking from sleep
    It continues to be a real pain having to reconnect to the network each time I wake my MacBook Air from sleep.
    Does anyone have a suggestion for the resolution to this problem?

    It seems the update fixed old problems for some and caused new problems for others. Sorry to hear you're in the latter group.
    Here are some things to try.
    1. Go to System Preferences > Network, and click the gear icon under the network interfaces like so:
    Whatever service order you have set, drag Wi-Fi either to the top (assuming it's not already there) or someplace else in the list. Click OK and then Apply. Sleep the system then wake it again to observe any changes.
    2. Click Wi-Fi in the above then click Advanced. Select all the networks your computer has ever joined and delete them with the "-" button. OK then Apply again. Select your network under the AirPort icon to re-join it. Sleep and wake again to see if that did anything.
    3. Try creating a new, temporary user account. Log in under that account to see if its behavior is any different.
    You may have done all of these already but perhaps there is something you have not thought of. If nothing helps we may just have to wait a bit longer for Apple to release a fix.

  • DVI monitor fuzzy sometimes when waking from sleep

    Hi there,
    I have a new Samsung SyncMaster P2350 connected via MiniDisplayPort > DVI adapter. Works great 90% of the time.
    I use the monitor primarily as my main and have the MBP lid closed.
    Sometimes when waking the MBP by moving the mouse the screen will come back up all fuzzy (much like an old television on no channel). I then turn the monitor off and back on and the picture returns..!
    I know this is not the monitor or the adapter itself as a friend came over a few weeks ago with his adapter and we connected the MBP to my Panasonic Plasma and initially had the same problem.
    Has anyone else experienced this? The fuzzy colours as mainly made up of purples, blacks and whites.
    Thanks,
    Brett

    The weird thing is that every morning, when I move my mouse to wake the computer, both displays go from black to show the desktop but the second display immediately goes back to black. Unplugging it and plugging it back in eventually works after multiple trys. Restarting the computer sometimes works but not always.
    The only other major change to my computer before this started happening is that I installed Leopard.
    So far I've tried setting my Macbook Pro not to go to sleep but that didn't change anything.
    Should I try setting my displays not to go to sleep either? I haven't tried that because Energy Saver warned me that it could reduce the lifespan of the display.

  • Is there a way to disable previously viewed iMessages from appearing as Messages notifications when waking my MacBook Pro from sleep?

    Is there a way to disable previously viewed iMessages from appearing as Messages notifications when waking my MacBook Pro from sleep?  Regardless of whether I am using iMessage from  my iPhone or iPad, when I open my MBP, I get attacked by Messages notifications for iMessages I've obviously already seen or responded to.  Is there a way to change this?  Are others having this issue?
    Additionally,  previous iMessages sent or received from those  devices sometimes don't populate into the Messages window on the MBP.  I haven't been able to identify when or what causes this; sometimes it just doesn't seem to work (and I verified that the messages sent/received were, in fact, iMessages and not SMS).
    Thanks - any help or insight would be appreciated!

    First you need to determine what laptop model you have; then we can help you. A Mac Book Pro cannot run OS 9.1.
    With your Mac booted up, click on the  at the far left of the menu. Then click on About This Mac. It will show what version of OS  you are running. What is the version?
    A MBP will be running something like version 10.x.
    If you are running version OS 9.x, you don't have a Mac Book Pro.
     Cheers, Tom

  • I want to create a HD disc with my Adobe Premier Elements but I am getting low resolution.  When I go to share the DVD to disc the form only offers 8pixels at the bottom.  How do I burn this DVD in HD with higher number of pixels?

    I want to create a HD disc with my Adobe Premier Elements but I am getting low resolution.  When I go to share the DVD to disc the form only offers 8pixels at the bottom.  How do I burn this DVD in HD with higher number of pixels?  I have read other forums on burning HD DVD's but I do not see the option to turn the 8 pi into 40 pi the one forum recommended.  I want my DVD to be HD so I may sell these videos online for my business.  I can't sell them the low quality they are burning now.  Hopefully you can help me.  Thanks.

    desalvom
    Thank you for your reply.
    You cannot burn your high resolution video that you can view on your computer to an AVCHD on DVD disc
    that will replay through a regular DVD player. But players are marketed under a variety of names with
    different support opportunities. One manufacturer may call its product MultiMedia Player, media player, Blu-ray player,
    etc.The bottom line is the specifications for each of the players that are candidates for the playback of
    the AVCHD format on DVD disc or the format of interest.
    If you upload your HD (1920 x 1080) video to YouTube, YouTube converts the video to flash format, but it goes up as the HD video.
    But, beware. Look at the YouTube viewing setting when your uploaded video is playing back. The YouTube default is not
    HD. It might be 360p, 480p. If you have a 1080p video, then before the YouTube playback, you should be looking
    at the video with the YouTube 1080p HD setting for best viewing. That is a YouTube matter.
    Best results depend on you
    a. setting up the Premiere Elements project preset to match the properties of the source media. That means, if
    you have 1080p source, you (manually) or the project (automatically) set the project preset at
    NTSC
    DSLR
    1080p
    DSLR [email protected]
    or the PAL counterpart, depending on your region need.
    b. if you upload your video to YouTube using the Premiere Elements feature, there is a HD preset, but you cannot
    customize it.....if you need customization, then you can export your Timeline to a file...in this example
    Publish+Share
    Computer
    AVCHD
    with Presets = MP4 H.264 1920 x 1080p30 or PAL counterpart
    and then customize the preset under the Advanced Button/Video Tab of that preset. In increase quality, you might look to increase
    the Bitrate under Advanced Button/Video Tab settings - without compromising the file size.
    Then you would upload that file to YouTube at the YouTube web site.
    All of the above are factors that need looking into in order to determine the why for what you wrote
    I have published a shortened advertisement video to YouTube- say 5 minutes-
    and it is low quality
    Often SD video upscaled to HD can present poorly. But, you are dealing with a HD workflow so that should not be introduced into the matter. The setup of the project and
    the properties of the source video are important, but let us start with the above and rule in or out those considerations first.
    Thank you. As always, any clarification needed, please do not hesitate to ask.
    ATR

  • Macbook Pro beeping when waking from sleep

    I have just upgraded from Lion to Moutain Lion. Before upgrading I did all the usual disk check and stuff. But currently when my computer wakes up from sleep there is a loud beeping and black screen, I have to force shut down to use the notebook. This have happen twice. Once yesterday morning and today evening. I installed Moutain Lion on 2 Aug.
    - Yesterday Morning
    Went out left the computer on to download stuff, my notebook is always set to sleep after 1hr after I came back turn on the computer there is loud beeping had to force shut down.
    Search the internet found it could be a corrupt sleep image file or ram problem. I did a memory test no problems. Therefore I accepted that it could be a once off corrupted sleep image file as I was not at home when the computer went to sleep.
    After I rebooted there is this message that the computer recovered from a system problem.
    - Today Evening
    Went out decided to use Deep Sleep a dashboard widget for hibernation after I came back home the computer was running and there is the lound beeping. The computer was hot so it have turn on for sometime.
    There is no message that the computer recovered from a system problem this time.
    But there is this existing issue even with Lion. The computer will sometimes wakeup from its sleep. I have tried clicking sleep from the menu bar and the dashboard widget both have the same problem. I tried tweaking the sleep setting after searching for this issue online. But after sometime the problem returns.
    But there is no loud beeping. Just a hot computer running since the lid was close. So the problem was not an issue at first.
    I have also notice before upgrading to moutain lion when I was next to the notebook and while it is still sleeping it will sometimes make the usual noise when starting up or booting from sleep. But when I open the lid it is still asleep. I think the noise is from the dvd drive not too sure.
    So the issue occured before upgrading and got worst after upgrading. What should I do? I have tried looking at console but don't seem to find a clue what log file shoud I be checking?

    Ok I have send a request for a call back request. Hopefully I can speak to someone with a technical background and not ask me to go through a series of standard steps.
    The notebook is running great no problems or issues. No kernal panic or problems booting. No traces in the log file of what went wrong. Previously in lion when the computer wakes up from sleep I could check the cause in console but as the computer now goes into beeping when waking up in moutain lion there is no traces at all.

  • Is there a way to prevent Itunes' volume from lowering when I receive texts and email?

    Whenever I have my iphone connected to a speaker, the volume lowers when I receive a text or email. This can be very frustrating and I'm wondering if there is a setting to prevent this from happening. Can anyone help?

    Put your phone in silent mode, or enable do not disturb.

  • Since updating to Lion the iMac won't recognise the external hard drive (maxtor) when waking from sleep mode,

    Hi All, Since updating to Lion, my imac won't recognise the ext HDD (Maxtor) when waking from sleep mode, I have tried another port, diisc utility (Ext HDD not listed in here) but nothing works. I now find that I have to restart the imac to get the drive recognised..which is fine until the imac goes into sleep mode then I lose the drive and have to restart etc etc.....anyone suffering same issue.  The Ext Drive worked perfectly until the upgrade..

    Thanks for this, and apologies for delay in replying...in between seeing your post I backed up the ext hdd to another mac and used the disc utility to erase and repair and then re mounted the ext hdd. OK.  I have then tested the ext hdd being recognised when waking from sleep mode a few times and everything appears to be fine. If this doesn't work (long term) I will follow the instructions as you have suggested....
    I now have a new problem with my HP printer (Photosmart Plus) which is not being recognised by a new wireless router..Ok whilst the router is switch on and I have reconfigured the printer..but when the router is switched off overnight and then switched back on...I get a 'printer is not connected' message and have to go through the re configure routine all over. I am minded to think this is a router problem as the same issue is happening to my wifes Mac Book Pro (which is only a few weeks old)...any suggestions..

  • IMac loses connection to network when waking from sleep

    Hi There,
    We are a small mixed environment of Macs and PCs running on a Windows 2008 domain. One of 2 iMacs that now run Mountain Lion 10.8.5 is having problems when waking from sleep. One of our designers will go for lunch and the machine will sleep for about 30 to 40 minutes. Upon her return the iMac will kick her off of the 3 shares she usually logs into (2 are on Win2008 machines, and 1 is a MacPro running 10.6.8 Server).
    If she has files open in any of the Creative Suite Apps, the app will crash and she will have to restart the whole machine. If no files are open then she can usually reconnect to the shares after a short while.  Obviously I told her not to leave any files open, but its causing her some headaches.
    Its also creating srv errors (id 2012) on our domain controllers, when she tries to wake her machine.
    This Imac is a late 2009, and we have a 2011 model that has no issues at all. Both are set exactly the same.
    I have reset SMC, Pram, and rebinded to the domain, and searched through these forums quite a bit to no avail.
    Any thoughts or suggestions would be much appreciated.

    I am continuing to work on this issue, and have tried a number of things based on searching here and elsewhere.
    And Lucky Me, I have been able to replicate this behavior on one of other Macs (imac 2011, on 10.8.5). I also see errors on 2 separate Windows file servers on the domain (Event ID: srv 2012).
    Below I am posting what seems to be the relevant area of the log.
    Nov 14 11:48:04 PrePressMac2 kernel[0]: Wake reason: EHC1
    Nov 14 11:48:04 PrePressMac2 kernel[0]: Previous Sleep Cause: 5
    Nov 14 11:48:04 PrePressMac2 kernel[0]: The USB device HubDevice (Port 1 of Hub at 0xfd000000) may have caused a wake by issuing a remote wakeup (2)
    Nov 14 11:48:04 PrePressMac2 kernel[0]: 18323.795216: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
    Nov 14 11:48:04 PrePressMac2 kernel[0]: 18323.795224: switchVap from 1 to 1
    Nov 14 11:48:04 PrePressMac2 kernel[0]: The USB device Keyboard Hub (Port 3 of Hub at 0xfd100000) may have caused a wake by issuing a remote wakeup (3)
    Nov 14 11:48:04 PrePressMac2 kernel[0]: The USB device Apple Keyboard (Port 2 of Hub at 0xfd130000) may have caused a wake by issuing a remote wakeup (3)
    Nov 14 11:48:04 PrePressMac2 kernel[0]: HID tickle 117 ms
    Nov 14 11:48:04 PrePressMac2 kernel[0]: TBT W (1): 0 [x]
    Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
    Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: Created shield window 0x1e1 for display 0x003f003d
    Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
    Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: Created shield window 0x1e2 for display 0x003f003e
    Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
    Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: Created shield window 0x1e3 for display 0x003f003f
    Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
    Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: Created shield window 0x1e4 for display 0x003f0040
    Nov 14 11:48:04 PrePressMac2.local WindowServer[90]: handle_will_sleep_auth_and_shield_windows: no action for lock state 1
    Nov 14 11:48:05 PrePressMac2 kernel[0]: AppleBCM5701::selectMedium - autoselect, any duplex, EEE allowed, flow control allowed
    Nov 14 11:48:05 PrePressMac2 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link down on en0
    Nov 14 11:48:06 PrePressMac2.local KernelEventAgent[47]: tid 00000000 received event(s) VQ_NOTRESP (1)
    Nov 14 11:48:06 PrePressMac2.local KernelEventAgent[47]: tid 00000000 type 'smbfs', mounted on '/Volumes/PrePress', from '//aconti@GAIA/PrePress', not responding
    Nov 14 11:48:06 PrePressMac2.local KernelEventAgent[47]: tid 00000000 found 1 filesystem(s) with problem(s)
    Nov 14 11:48:10 PrePressMac2 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,0321,0de1,0300,c5e1,7800]
    Nov 14 11:48:12 PrePressMac2.local configd[19]: network changed: v4(en0+:192.168.1.184) DNS+ Proxy+ SMB+
    Nov 14 11:48:12 PrePressMac2.local SophosAntiVirus[67]: reloading scheduled scans...
    Nov 14 11:48:12 prepressmac2.cutpasteandprint.net configd[19]: setting hostname to "prepressmac2.cutpasteandprint.net"
    Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]: label: default
    Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]:           dbname: od:/Local/Default
    Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]:           mkey_file: /var/db/krb5kdc/m-key
    Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]:           acl_file: /var/db/krb5kdc/kadmind.acl
    Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: uid=0
    Nov 14 11:48:12 prepressmac2.cutpasteandprint.net rpcsvchost[1049]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
    Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: init request
    Nov 14 11:48:12 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: init return domain: CPP server: PREPRESSMAC2
    Nov 14 11:48:12 prepressmac2 kernel[0]: Sandbox: sandboxd(1050) deny mach-lookup com.apple.coresymbolicationd
    Nov 14 11:48:12 prepressmac2.cutpasteandprint.net sandboxd[1050] ([1049]): rpcsvchost(1049) deny file-read-data /private/var/root/Library/Preferences/ByHost/.GlobalPreferences.037506C4-0B10-5 70D-A7B6-B3B8F7AE0CC6.plist
    Nov 14 11:48:12 prepressmac2.cutpasteandprint.net sandboxd[1050] ([1049]): rpcsvchost(1049) deny file-read-data /private/var/root/Library/Preferences/.GlobalPreferences.plist
    Nov 14 11:48:13 prepressmac2.cutpasteandprint.net nsupdate[1055]: krb5_sendto_context is called on main thread, its a blocking api
    Nov 14 11:48:13 prepressmac2.cutpasteandprint.net nsupdate[1055]: gss_init_sec_context is called on main thread, its a blocking api
    Nov 14 11:48:13 prepressmac2.cutpasteandprint.net nsupdate[1056]: gss_init_sec_context is called on main thread, its a blocking api
    Nov 14 11:48:14 prepressmac2.cutpasteandprint.net nsupdate[1057]: krb5_sendto_context is called on main thread, its a blocking api
    Nov 14 11:48:14 prepressmac2.cutpasteandprint.net nsupdate[1057]: gss_init_sec_context is called on main thread, its a blocking api
    Nov 14 11:48:14 prepressmac2.cutpasteandprint.net nsupdate[1058]: gss_init_sec_context is called on main thread, its a blocking api
    Nov 14 11:48:15 prepressmac2.cutpasteandprint.net nsupdate[1060]: krb5_sendto_context is called on main thread, its a blocking api
    Nov 14 11:48:15 prepressmac2.cutpasteandprint.net nsupdate[1060]: gss_init_sec_context is called on main thread, its a blocking api
    Nov 14 11:48:16 prepressmac2.cutpasteandprint.net nsupdate[1061]: gss_init_sec_context is called on main thread, its a blocking api
    Nov 14 11:48:17 prepressmac2 com.apple.launchd[1] (com.apple.smb.preferences): Throttling respawn: Will start in 5 seconds
    Nov 14 11:48:17 --- last message repeated 2 times ---
    Nov 14 11:48:17 prepressmac2.cutpasteandprint.net nsupdate[1063]: krb5_sendto_context is called on main thread, its a blocking api
    Nov 14 11:48:17 prepressmac2.cutpasteandprint.net nsupdate[1063]: gss_init_sec_context is called on main thread, its a blocking api
    Nov 14 11:48:18 prepressmac2.cutpasteandprint.net nsupdate[1067]: gss_init_sec_context is called on main thread, its a blocking api
    Nov 14 11:48:18 prepressmac2.cutpasteandprint.net netbiosd[92]: name servers down?
    Nov 14 11:48:19 prepressmac2.cutpasteandprint.net nsupdate[1068]: krb5_sendto_context is called on main thread, its a blocking api
    Nov 14 11:48:19 prepressmac2.cutpasteandprint.net nsupdate[1068]: gss_init_sec_context is called on main thread, its a blocking api
    Nov 14 11:48:19 prepressmac2.cutpasteandprint.net nsupdate[1069]: gss_init_sec_context is called on main thread, its a blocking api
    Nov 14 11:48:22 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: uid=0
    Nov 14 11:48:22 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: init request
    Nov 14 11:48:22 prepressmac2.cutpasteandprint.net digest-service[1048]: digest-request: init return domain: CPP server: PREPRESSMAC2
    Nov 14 11:48:22 prepressmac2.cutpasteandprint.net KernelEventAgent[47]: tid 00000000 received event(s) VQ_NOTRESP (1)
    Nov 14 11:48:22 prepressmac2 kernel[0]: smb_iod_reconnect: Reconnected share PREPRESS with server GAIA
    Nov 14 11:48:32 prepressmac2.cutpasteandprint.net ManagedClient[1077]: ODUGetMCXRecordWithCache(): record unique ID for 'PrePressMac2' not set
    Nov 14 11:48:32 prepressmac2.cutpasteandprint.net ManagedClient[1077]: ODUGetMCXRecordWithCache() Accessing network user record from Active Directory not allowed because no authentication information was supplied.
    Nov 14 11:56:25 prepressmac2 com.apple.launchd.peruser.1997381720[389] ([0x0-0x4a04a].com.adobe.InDesign[630]): Exited: Terminated: 15
    Nov 14 11:56:34 prepressmac2.cutpasteandprint.net spindump[1100]: Saved hang report for Adobe InDesign CS5.5 version 7.5.3.333 (7530) to /Library/Logs/DiagnosticReports/Adobe InDesign CS5.5_2013-11-14-115634_PrePressMac2.hang
    This is from the 2011 iMac, and I see something very similar to this on the 2009 machine. 
    I continue to think this is a software issue related to 10.8.5 and Adobe CS (CS5 on the 2009 machine and CS 5.5 on the 2011) as this appears to have come up only since the recent update.
    Any help would be appreciated.

  • Late 2007 MB Freezes when waking from Sleep after Lion Upgrade

    I have a Late 2007 MacBook that I recently upgraded from Snow Leopard to Lion.  Since the upgrade, the computer occassionally freezes when waking up from Sleep (putting it to sleep by shutting the screen).  Sometimes, I will see about 1-2 seconds of activity (i.e. AIrPort icon searching for network), but then the screen will turn black and the computer will restart.  Other times, I actually get a kernel panic. 
    I never had this issue with Snow Leopard, and it seems to happen more often if I try to use the computer (i.e. move the mouse or press a key on the keyboard) immediately after I open the screen and while it's still waking up.  By being patient and giving the computer 5-10 seconds to wake up, it seems to only freeze about 1 out of every 7 times when waking up, but it's stil frustrating to not know whether or not I'm going to lose my work anytime I put the computer to sleep.
    From other issues that I've researched, I've disabled Bluetooth completely (which reportedly fixed some similar issues), but I still had periodic freezes even with it disabled.
    The only thing I can think of that might be contributing to a weird hardware issue is that the AirPort card died on me a few years ago, and I had to replace it with an AirPort Extreme from a Late 2007 15" MacBook Pro (I'm pretty sure the model of the card I put in is AR5BXB72, although I could open my computer back up to verify if that would be helpful).  Snow Leopard seemed to be perfectly fine with that card, and Lion is ok for the most part (WiFi works perfectly fine), but I'm wondering if I need to update/change any Kexts for that piece of hardware.
    Here is one of the kernel panic reports from about 2 weeks ago:
    Sat Jan 19 20:56:41 2013
    Machine-check capabilities (cpu 1) 0x0000000000000806:
    family: 6 model: 15 stepping: 10 microcode: 146
    Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz
    6 error-reporting banks
    threshold-based error status present
    Machine-check status 0x0000000000000004:
    machine-check in progress
    MCA error-reporting registers:
    IA32_MC0_STATUS(0x401): 0xf200004000000800 valid
      MCA error code:            0x0800
      Model specific error code: 0x0000
      Other information:         0x00000040
      Threshold-based status:    Undefined
      Status bits:
       Processor context corrupt
       Error enabled
       Uncorrected error
       Error overflow
    IA32_MC1_STATUS(0x405): 0x0000000000000000 invalid
    IA32_MC2_STATUS(0x409): 0x0000000000000000 invalid
    IA32_MC3_STATUS(0x40d): 0x0020000000000000 invalid
    IA32_MC4_STATUS(0x411): 0x0000000000000011 invalid
    IA32_MC5_STATUS(0x415): 0xf200241010040400 valid
      MCA error code:            0x0400
      Model specific error code: 0x1004
      Other information:         0x00002410
      Threshold-based status:    Undefined
      Status bits:
       Processor context corrupt
       Error enabled
       Uncorrected error
       Error overflow
    panic(cpu 0 caller 0x2cf3cc): "Machine Check at 0x00dfa4c8, trapno:0x12, err:0x0," "registers:\n" "CR0: 0x8001003b, CR2: 0x55cfe000, CR3: 0x2b84c000, CR4: 0x00000660\n" "EAX: 0x559edc20, EBX: 0x072db000, ECX: 0x00e0c428, EDX: 0x00000000\n" "ESP: 0x0010be00, EBP: 0x0010be68, ESI: 0x072d9000, EDI: 0x072d1280\n" "EFL: 0x00010006, EIP: 0x00dfa4c8\n"@/SourceCache/xnu/xnu-1699.32.7/osfmk/i386/trap_native.c:258
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x818d98 : 0x2203de (0x6b08cc 0x818db8 0x229fb0 0x0)
    0x818dc8 : 0x2cf3cc (0x6bde94 0x6bdfc8 0xdfa4c8 0x12)
    0x818f38 : 0x2cf409 (0x818f70 0xde 0x6bdfc8 0x1)
    0x818f58 : 0x2e6182 (0x818f70 0x0 0x0 0x0)
    0x10be68 : 0xdfa9a2 (0x72d9000 0x0 0x10bea8 0x22fb7f)
    0x10be88 : 0x666bb6 (0x72d9000 0x72d1280 0x75b2904 0x663d5e)
    0x10beb8 : 0x67cb5f (0x72d1280 0x0 0x7295080 0x0)
    0x10bef8 : 0x1ae3691 (0x72d1200 0x0 0x72d1200 0x0)
    0x10bf28 : 0x1b03351 (0x7277500 0x0 0x0 0x55)
    0x10bf48 : 0x1b0e7a3 (0x55 0x2d0d29 0x0 0x1313d70)
    0x10bf78 : 0x69ca2d (0x71c8680 0x0 0x71e3180 0x55)
    0x10bf98 : 0x2ceba4 (0x55 0x10eb710 0x4 0x0)
    0x10bfd8 : 0x2e570e (0x10eb710 0x2c5db0 0x0 0x2c5e0b)
    0x10eb808 : 0x527e2f (0x6c42c8 0x19 0x80cc82e 0x10eb868)
    0x10eb878 : 0x5286a9 (0x7513aa0 0x10eb8f0 0x743a004 0x0)
    0x10eb8d8 : 0x32b069 (0x10eb8f0 0x0 0x0 0x0)
    0x10eb918 : 0x322e68 (0x74fabc0 0x6c42c8 0x0 0x10eb978)
    0x10eb948 : 0x32920c (0x74fabc0 0x6c42c8 0x0 0x10eb978)
    0x10eb988 : 0x32c81b (0x804bf3c 0x10ebae0 0x804bf3c 0x10ebb28)
    0x10eb9b8 : 0x308afb (0x74fabc0 0x10ebae0 0x804bf3c 0x0)
    0x10ebc28 : 0x54d235 (0x72803e0 0x0 0x880 0x804bf3c)
    0x10ebc58 : 0x307d0e (0x73dbb04 0x72803e0 0x880 0x804bf3c)
    0x10ebc88 : 0x321fb2 (0x74fabc0 0x0 0x880 0x804bf3c)
    0x10ebca8 : 0x316802 (0x74fabc0 0x10ebd60 0x0 0x1)
    0x10ebdd8 : 0x317478 (0x5f607c0 0x1 0x0 0x0)
    0x10ebf78 : 0x5f3c2a (0x7564828 0x10846394 0x804be80 0x7f81cd0)
    0x10ebfc8 : 0x2e60a7 (0x10846390 0x0 0x2c7d1b 0x10846390)
          Kernel Extensions in backtrace:
             com.apple.driver.AppleACPIPlatform(1.5)[C5484D26-28D3-4DA8-B2C0-7A3EB8F38BD5]@0 x1b01000->0x1b56fff
                dependency: com.apple.iokit.IOACPIFamily(1.4)[5EC48FA0-6225-414F-ABAB-A898F91B7E15]@0xa8700 0
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8087C029-833E-4B62-A8C3-2B074B4C55F7]@0xb3c000
             com.apple.driver.AppleAPIC(1.6)[5BEB4F30-F328-4086-9502-DE97ED5448F2]@0x1ae2000 ->0x1ae5fff
             com.apple.driver.AppleUSBEHCI(5.1)[607ED327-88BE-4ABF-A666-AD1D02B3D03E]@0xdf60 00->0xe15fff
                dependency: com.apple.iokit.IOUSBFamily(5.1.0)[ACF52DAA-24ED-4520-A3A1-4B4C3C53C8A5]@0xcae0 00
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8087C029-833E-4B62-A8C3-2B074B4C55F7]@0xb3c000
    BSD process name corresponding to current thread: mds
    Mac OS version:
    11G63
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:26:45 PDT 2012; root:xnu-1699.32.7~1/RELEASE_I386
    Kernel UUID: 859B45FB-14BB-35ED-B823-08393C63E13B
    System model name: MacBook3,1 (Mac-F22788C8)
    System uptime in nanoseconds: 32336204274368
    last loaded kext at 206807220187: com.apple.filesystems.smbfs    1.7.2 (addr 0xaa8000, size 249856)
    last unloaded kext at 211045878088: com.apple.driver.USBCameraFirmwareLoader    1.1.0 (addr 0xdaf000, size 24576)
    loaded kexts:
    com.logmein.driver.LogMeInSoundDriver    1.0.0
    com.apple.filesystems.smbfs    1.7.2
    com.apple.driver.AudioAUUC    1.59
    com.apple.filesystems.autofs    3.0
    com.apple.driver.AppleHWSensor    1.9.5d0
    com.apple.driver.AppleHDA    2.2.5a5
    com.apple.driver.AppleSMCPDRC    5.0.0d8
    com.apple.driver.AppleUpstreamUserClient    3.5.9
    com.apple.driver.AppleIntelGMAX3100    7.0.4
    com.apple.driver.AppleIntelGMAX3100FB    7.0.4
    com.apple.driver.SMCMotionSensor    3.0.2d6
    com.apple.iokit.IOUserEthernet    1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager    4.0.8f17
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.driver.AudioIPCDriver    1.2.3
    com.apple.driver.ApplePolicyControl    3.1.33
    com.apple.driver.AirPort.Atheros21    431.14.10
    com.apple.driver.AppleLPC    1.6.0
    com.apple.driver.ACPI_SMC_PlatformPlugin    5.0.0d8
    com.apple.driver.AppleBacklight    170.2.2
    com.apple.driver.AppleMCCSControl    1.0.33
    com.apple.driver.CSRUSBBluetoothHCIController    4.0.8f17
    com.apple.driver.AppleUSBTrackpad    227.6
    com.apple.driver.AppleUSBTCKeyEventDriver    227.6
    com.apple.driver.AppleUSBTCKeyboard    227.6
    com.apple.driver.AppleIRController    312
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    33
    com.apple.iokit.SCSITaskUserClient    3.2.1
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCIBlockStorage    2.1.0
    com.apple.driver.AppleUSBHub    5.1.0
    com.apple.driver.AppleEFINVRAM    1.6.1
    com.apple.driver.AppleFWOHCI    4.9.0
    com.apple.driver.AppleHPET    1.7
    com.apple.driver.AppleAHCIPort    2.3.1
    com.apple.driver.AppleIntelPIIXATA    2.5.1
    com.apple.driver.AppleUSBEHCI    5.1.0
    com.apple.iokit.AppleYukon2    3.2.2b1
    com.apple.driver.AppleUSBUHCI    5.1.0
    com.apple.driver.AppleRTC    1.5
    com.apple.driver.AppleSmartBatteryManager    161.0.0
    com.apple.driver.AppleACPIButtons    1.5
    com.apple.driver.AppleSMBIOS    1.9
    com.apple.driver.AppleACPIEC    1.5
    com.apple.driver.AppleAPIC    1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient    195.0.0
    com.apple.nke.applicationfirewall    3.2.30
    com.apple.security.quarantine    1.4
    com.apple.security.TMSafetyNet    8
    com.apple.driver.AppleIntelCPUPowerManagement    195.0.0
    com.apple.kext.triggers    1.0
    com.apple.driver.DspFuncLib    2.2.5a5
    com.apple.iokit.IOSurface    80.0.2
    com.apple.iokit.IOSerialFamily    10.0.5
    com.apple.iokit.IOAudioFamily    1.8.6fc18
    com.apple.kext.OSvKernDSPLib    1.3
    com.apple.iokit.IOFireWireIP    2.2.5
    com.apple.iokit.IO80211Family    420.3
    com.apple.driver.AppleHDAController    2.2.5a5
    com.apple.iokit.IOHDAFamily    2.2.5a5
    com.apple.driver.AppleGraphicsControl    3.1.33
    com.apple.driver.AppleSMC    3.1.3d10
    com.apple.driver.IOPlatformPluginLegacy    5.0.0d8
    com.apple.driver.IOPlatformPluginFamily    5.1.1d6
    com.apple.driver.AppleBacklightExpert    1.0.4
    com.apple.driver.AppleSMBusController    1.0.10d0
    com.apple.iokit.IONDRVSupport    2.3.4
    com.apple.iokit.IOGraphicsFamily    2.3.4
    com.apple.driver.AppleUSBBluetoothHCIController    4.0.8f17
    com.apple.iokit.IOBluetoothFamily    4.0.8f17
    com.apple.driver.AppleUSBMergeNub    5.1.0
    com.apple.iokit.IOUSBHIDDriver    5.0.0
    com.apple.driver.AppleUSBComposite    5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.1
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOATAPIProtocolTransport    3.0.0
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.1
    com.apple.iokit.IOUSBUserClient    5.0.0
    com.apple.iokit.IOFireWireFamily    4.4.8
    com.apple.iokit.IOAHCIFamily    2.0.8
    com.apple.iokit.IOATAFamily    2.5.1
    com.apple.iokit.IONetworkingFamily    2.1
    com.apple.iokit.IOUSBFamily    5.1.0
    com.apple.driver.AppleEFIRuntime    1.6.1
    com.apple.iokit.IOHIDFamily    1.7.1
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    177.8
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.driver.DiskImages    331.7
    com.apple.iokit.IOStorageFamily    1.7.2
    com.apple.driver.AppleKeyStore    28.18
    com.apple.driver.AppleACPIPlatform    1.5
    com.apple.iokit.IOPCIFamily    2.7
    com.apple.iokit.IOACPIFamily    1.4
    And here is an odd one from just the other day (this is the entire panic report when viewing it in Console):
    Thu Jan 31 18:37:05 2013
    Machine-check capabilities (cpu 1) 0x0000000000000806:
    family: 6 mPdaei: c(CPU10):5 snepresing: sive1pr0c smsori(rotodhie C:U did n14 a6know edge Intenrupts)tTLeB slate(0x1R
    Any thoughts??

    ....anyone have any ideas?

  • My MBP doesn't remember my Time Capsule wireless network when waking from sleep

    My MBP (OS 10.5.8) doesn't remember my Time Capsule wireless network when waking from sleep.  Thus, every time my MBP wakes from sleep, I need to select the Airport icon in the upper menu bar, select "Join other network", enter SSID and password.  This is very cumbersome.  And, I never had this problem when I was using the ISP's provided wireless router/gateway/DSL modem. Adding the Time Capsule and using it to generate the wireless network has introduced this problem. 
    It appears that this problem has to do with the hidden SSID.  I don't need the lecture on how hidden SSID provides no serious security benefit.  That's why I have the WPA2 encryption.  I'm interested in a solution that will allow the Time Capsule to generate the wireless network, maintain a hidden SSID, continue to use WPA2 encryption, but have my MBP recognzie and autoconnect to this network.
    Solutions I've alread tried:
    1. Open Network Preferences
    2. Select Airport from left hand column (and ensure Airport is at top of that list)
    3.  Select Advanced
    4.  Delete all Preferred Networks.
    5.  Apply settings.
    6.  Restart computer
    7.  Return to Network Preferences and from Advanced page, manually add my network with hidden SSID and WPA2 password
    This solution works fine as long as I don't take my computer elsewhere and connect to another network.  As soon as my preferred networks list gets another network, my MBP stops finding my TC network.  Since I take my laptop to a lot of places (it's a laptop, after all...) this is a problem.
    As I say, prior to adding the TC on my network (and using it to generate the wireless network), my MBP had no problem keeping 50+ preferred network names/passwords in the Preferred Network list, but always automatically finding/connecting to my home network without the need to "Join other network."  Thus, I assume the problem lies with the Time Capsule.
    Any ideas?

    LaPastenague, thanks for weighing in.  Didn't know that the hidden SSID capability was not IEEE standardized, and thus different devices will handle hidden SSID differently.  With my admittedly limited knowledge of how SSID/hidden SSID works, I'm still a little confused as to why my MBP would remember the generic router/gateway's hidden network, but struggle with the TC's hidden network.
    To my knowledge, when an SSID is broadcast by a base station (Airport, wireless gateway, etc.), a connecting device (like a laptop, iPad, etc.) detects this broadcast--this would be a passive reception of this SSID signal.
    When an SSID is hidden, the base station does not broadcast its identification.  Rather, a connecting device must transmit the name, and when the base station recognizes the broadcast, the connection is made. That's what you do when you select "Join another network" and manually enter the SSID.
    The idea with OS X's Network Preferences is that these steps, whether for hidden networks or broadcast SSIDs, become automated.
    Where is the potential for a different chipset between the TC and the previously used wireless router/gateway to alter this functionality?  Shouldn't the selection of an SSID by the MBP to broadcast to seek for a base station be a function solely on the MBP?  And once broadcast by the MBP, the TC should detect and reply? 
    Basically, the MBP can connect to the hidden TC manually just fine.  The MBP can connect to the old setup automatically just fine.  The MBP cannot connect to the TC automatically.  Aren't these automatic connection functions solely on the MBP?
    I'll try un-hiding the network and re-verifying that the problem is exclusively with the hidden network.
    Z

Maybe you are looking for