Resolution of the screen

I need to know who to change the resolution of the screen in the program, to run in every computer??
Can Anyone Help?
Carlos Lima

Hello Thomas,
Do you mean that the resolution in remote desktop is too high?
Please check your configuration as this article:
http://blogs.msdn.com/b/rds/archive/2013/12/16/resolution-and-scaling-level-updates-in-rdp-8-1.aspx
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

I have fixed the resolution on the screen,but the window is still to big for my dell laptop what else do I do

certain pages are to big for my screen, the text sometimes to are to small, not always but a lot more then I want. I have tried to research it but I can't find anything except to fix the resolution which I checked it and it was set at 1024 x 768 should I have it set at something else? I need to activate my windows and I can't due to the screen won't let me scroll down to enter the codes?? HELP ME :(

When the iPod shows the connect to iTunes cren the iPod is already erased.
The iPod backup that iTunes makes does not included synced media like apps and music.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Do the download before restoring from iTunes backup

How to increase the max resolution of the screen under KDE?

Now, the max resolution I can set is 1280*768, how can I get a larger one? such as 1920*1080.(my screen is big enough)
My arch is installed on a VMware virtual machine, the Win7 install on it can change the resolution as I wish.
I install the arch linux and KDE according to the beginners' guide on the wiki, please tell me if I need to provide more information.
Thank you all : )

You probably need some VMWare guest additions and drivers. Currently, it looks like your system is using the VESA/MESA framebuffer or something.
Have you read the wiki? https://wiki.archlinux.org/index.php/Vmware

RDP connection to remote host displays smaller resolution than the screen resolution

Having a problem with a surface with 8.1 installed. When connecting via Remote Desktop Connection to a remote host, the display is smaller than the display settings set for the desktop on the surface. If I change the Display settings for the
Surface, the display in the RDP session is still smaller.
I've tried changing the resolution settings for the connections under the display section of Remote Desktop Connection, but all that does is change the session to a window instead of full screen and does nothing to change the actual display size of the remote
session.
I believe this may be a function of DPI Scaling, but changing settings on the local surface display does nothing to change the behavior in the remote session.

Hi,
Sorry for my dilatory reply. Actually acctually to your descriptioin, I doubt whether this problem caused by Surface itself problem. It would be better to contact Surface Forum for further
assistance:
Surface Support:
http://answers.microsoft.com/en-us/surface
Roger Lu
TechNet Community Support

Picture resolution for the screen background help

I'm trying to set one of my pictures as a backround for 17" mbp but it doesn't fit right at all.. I can't figure out what am I to do, I'm new to macs... can someone help me out here? thanks.

You can use Photoshop or GraphicConverter to crop the image, cut some off the top and bottom, so that the aspect ratio matches your screen. Or, you can add space to the picture horizontally and fill it with something that matches the picture nicely.
MacBookPro 2.16, 1GB; iBook 1GB; Mac OS X (10.4.7) iPod Video 40; original 5G iPod

Adapt the size of string constants/indicators with the resolution of the screen

Hello,
I al currently working with Labview 2009. I have designed a VI with a resolution 1280x800. When I switch to a higger resolution, my string indicators becomes bigger but the police of the strings stays the same.. It is the same with Texts directly written on the front panel.. Any suggestions?
Thanks a lot,
Kastillio

Hello,
Please take a look on the link below:
http://digital.ni.com/public.nsf/allkb/048C31D73E8EC91286256E440063E1BB?OpenDocument
Regards
Luciano Borges
National Instruments Brazil
Luciano Borges
R&D Engineer
Pirelli Brazil

URGENT: How to fix an application with the screen resolution?

HI everyone,
I am desprate and need help.. I have developed an application with Java swing and awt (JFrames, JPanels and...). This application displays perfectly with 1280 x 1024 screen resolution but in a situation where the screen does not support this resolution, a part of my application will not appear. I can not even scroll down to see the reste of the components. Does any one has any idea that how I can resolve this problem! I mean how either I can make my JFrame or panel to scroll down or to change the size of the components according to the resolution!
Thank you very much and wait for a reply :)

One of the possible reason of the problem is you must have hardcoded the size of panels and other container that is just right for the screen resolution 1280 x 1024.
The solution is set the size of the containers that depends on the resolution of the screen.
You have not explained much detail about the scrolling problem. But I suppose that you have a scrollpane in you GUI and you want to scroll the component inside it even at another resolution.
try using this
if p is the panel that is added in the scrollpane then set its prefered size.
p.setPreferredSize(resolution dependant size).

How can I set the screen resolution ?

hello brothers.
my program works ultimately at 1024/768 screen resolution.
since I want to make sure that peaple who using that program will see it correct, I want to explicitly change the resolution of the screen.
how can I do that? please..

I believe you use the setDisplayMode() method of the GraphicsDevice object to do this.
If you go to http://www.scottshaver2000.com/ and download the source code to H.E.A.T., you will find a nice example of video mode switching. His game pops up a window showing the available configurations, then lets you select the one you want and switch to it.
The applicable classes are in his com.sas.gui package: FullScreenJFrame.java and VideoModeSelector.java.
Rick

When i export the app to ipad via phonegap it won't fit the screen.

Even when i choose the "Ipad Landscape" resolution template, the screen will be dragable up and down and will show white background where ever the app boundries are passed, it just won't sit properly in the ipad screen, how do i sove it ?
I'm using Captivate 8.0.1.

Connect the power cord and hit the space bar on the keyboard.
Apple Portables: How to use your computer in closed clamshell (display closed) mode with an external display

Resolution of a screen

Hi,
I am running Arch for about 1 year, doing upgrades from time to time. It is a graphical mode desktop. I have upgraded week or two ago.
Now each time I want to change the resolution of the screen, the screen goes blank with 'unsupported mode' message on it. The screen only works on maximum resolution detected at boot time.
Video card: VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 Series]
Driver: extra/xf86-video-ati 1:7.5.0-2
Connected to screen via Display Port.
Any known bug with it ?
Thanks,
Dima.
Last edited by dmitris (2015-05-23 08:12:24)

This is the list, apart from the highest none works
$ xrandr
Screen 0: minimum 320 x 200, current 2560 x 1600, maximum 8192 x 8192
DisplayPort-0 connected primary 2560x1600+0+0 (normal left inverted right x axis y axis) 641mm x 401mm
2560x1600 59.97*+
1920x1440 60.00
1920x1200 59.88
1920x1080 60.00 50.00 59.94 24.00 23.98
1920x1080i 60.00 50.00 59.94
1600x1200 60.00
1280x1024 75.02 60.02
1280x800 59.81
1152x864 75.00
1280x720 60.00 50.00 59.94
1024x768 75.08 60.00
800x600 75.00 60.32
720x576 50.00
720x576i 50.00
720x480 60.00 59.94
720x480i 60.00 59.94
640x480 75.00 60.00 59.94
720x400 70.08
DVI-0 disconnected (normal left inverted right x axis y axis)
I am trying to set 1280x800 since I am looking on the screen from far
Last edited by dmitris (2015-05-23 08:46:46)

Panning the screen of your 12" monitor

Panning is the ability to set your desktop bigger than your actually monitor.
(e.g. PB 12" is 1024x768, but you set the desktop to say, 1680x1050).
You can only see 1024 at a time, but with the mouse, you slide the view to different parts of the 1680 desktop.
Prior to buying an Apple, I owned at small VIAO with a 1024x480 screen (very small). It supported panning though, so I could work on a desktop which was 1024x768 even though the screen would only view 1024x480 at a time. I was a reasonable compromise.
I'm pretty sure you could implement this in software on the PB12, but I think it might be too slow. It's probably something you'd have to teach the video driver to do (don't know if there's programmable firmware). The memory in the video hardware of the PB is certainly capable of handling a much bigger desktop (monitor size).
So this post is one of two things:
1. A question -- does anyone know of a way to get panning capability on PB12?
2. A suggestion to Apple -- Support panning on your laptops (especially the small ones). I travel every day, so the bigger laptops just don't work for me. However, the 12" screen is very limiting as far as productivity goes. Panning might make a difference. (hint, hint... I'd be inclined to buy $$ the x86 Apple laptop if it was small and supported panning.
-Craig
PowerBook G4 Mac OS X (10.3.9)

Have you tried Universal Access as part of the system
preferences? If you turn on zoom, and change the
options to say maybe 2, the image is effectively
zoomed in closer around the area of your mouse
pointer, allowing the panning feature you mentioned.
This doesn't increase the available workspace however, and in-fact decreases the visible resolution of the screen - counter to what is being requested.
If I had two images that were 1000 pixels wide on a 1024x768 screen (the PowerBook), I wouldn't be able to put them side-by-side. If the PowerBook supported spanning to say 2048, then I could put them side-by-side (however not view them both at the same time). Imagine it like having an A3 drawing but viewing it through an A4 hole.
Matt

1 dead pixel on the screen

I seem to have a dead or stuck pixel on the screen. How do I know if its dead, or if its stuck? Do dead pixels look different from stuck pixels?
Im not to bothered about it as I can hardly see it and I struggle to see it, but it is slightly annoying that you know its there. It looks turquoise colour, but when I put some black over it on the screen, you cant see it.
Also, I have downloaded the stuck pixel fixer and run it for about 20 minutes, and it doesnt seemed to have done anything.
Does anyone suggest what to do? Also, does apple have a pixel policy? Like I said im not to bothered by it, but when you know its there it can get a bit annoying. I have to really look for it to see it though.

Yes thats what I was thinking. Like I said im not to bothered about it and I can hardly see it, but might give them a call and see what they say. Its not acually to bad. I have dead pixels on other things before and they have been much worse. It must be because of the resolution of the screen or something.
I have to say, the one thing I hate the most and is the most annoying thing out of all technology for me is a dead pixel, esspecially when its right in the middle of the screen. This one is just at the top where the program menu bar is, so its not to obvious. Infact, its probably the best place it could have happend really, if it were to happen at all.

Mac Mini and LCD TV, changed resolution and now cannot use the screen anymo

hello,
I have a Mac Mini and and LCD TV which is connected via HDMI cable. I was playing around with the resolution settings (not very smart in hindsight) and managed to select a resolution that my TV does not support. I do not have another monitor or Macbook. Is there anything I can do to reset the resolution settings? I tried to reset the PRAM, but that didnt seem to solve the problem. I also tried starting in Safe mode but that didnt do the trick either.
Appreciate your help!

Arie, it may be possible to get to System Preferences via the keyboard. But you have to be sure the Finder is the foreground application. Is your Mac set to boot straight into your account or does it pause waiting for a password? If it boots straight into a user account, you can try the following procedure:
\- Restart the Mac (It should be hooked up to the misbehaving display in case that's not clear)
\- When it is done booting, type Cmd-Tab and then Cmd-Q. Do this several times. (Cmd-tab will step the Mac through all the programs that might be running. Cmd-Q quits them. Doing this several times ensures that only the Finder is running since the Finder can't be quit. This is important for the next step)
\- Type Shift-Cmd-a (This should open the Applications folder)
\- Type "sys" quickly (System Preferences within the Applications folder should now be highlighted)
\- Type Cmd-o (This should open System Preferences)
\- Type out the word "screen settings" completely (This should cause Displays to be highlighted in the System Preferences main panel)
\- Hit the Return key (This should open Display Preferences)
\- Hit the Return key again (This will clear any alert box that may have popped up)
\- Hit the Tab key once (This will shift the keyboard focus to the resolutions list)
\- Now start using the up (or down) arrow on the keyboard one press at a time. Each press of the arrow key moves to the next resolution in the list. Wait at least five seconds between arrow key presses for the resolution change to take effect. Hopefully, at some point, the monitor will light up with a stable image and you are back in business.

I just bought a Samsung S22B310B computer monitor and hooked up to my Mac Mini. I have my mac set to the 1920X1080 resolution but the entire screen (21.5") is not filled. It looks like non HD channels do on an HD TV. Used regular hook up not DVI.

Just bought Samsung S22B310B computer monitor and hooked it up to my mac mini. I have my mac set to the 1920X1080 resolution but the entire screen (21.5") is not filled. How do fill the screen? it fills the screen on other resolution settings. I have it hooked up regularly and not to the DVI hook up. I'm not a computer savvy person please help!

That monitor supports both (digital) DVI and (analog) VGA connections, so you should not need a converter or use a different adapter.
You should use the Apple Supplied HDMI to DVI Adapter and a (digital) DVI cable to the monitor.

Screen recording - recording part of the screen or low resolution

I want to record part of the screen in quick time x, has anybody found a way to do this?
As a work-around, I tried reducing the screen resolution to 640x480 or 800x600 but the recorder doesn't seem to pick anything up at this resolution. After recording nothing happens then when i switch back to full resolution i get the message:
*Recording failed because no data was received.*
Make sure that the media input source is turned on and playing.
Message was edited by: nz_strabo

I am just trying to figure out how to record a screen shot, i dont care if its full or part screen, any advice for me?
Not sure if there is any difference between OS 10.6.1 and 10.6.2, but all I did was select the "New Screen Recording" File menu option and press the record button (circle with red dot in center) to make a test recording which was automatically saved in the Movies folder when the "stop recoding" key shortcut sequence was pressed. As to SnapzProX, it is a commercial program which you can purchase. It allows fullscreen/partial screen recordings and can be set up to record a fixed area of the screen or a fixed size portion of the screen area which follows the cursor around the screen.

Resolution of the screen

Similar Messages

Maybe you are looking for