Resolution problems when i crop

hello! i do a lot of photo editing and am temporarily using a laptop and a trial version of cs4 (i normally use cs2). i often square crop my images but have noticed that when i crop an image in cs4 on this laptop (running windows 7), my resolution automatically changes from 72 to 1 (for a jpeg image) or from 240 to 1 (if i shot in RAW)... i have never had this problem before.
i already checked to make sure i hadn't accidentally set the resolution to 1 in the tool bar... i also tried cropping with the resampling box UNCHECKED but that didn't work either... resolution was still changed to 1...
please, please help!! i have an assignment due for my photography class and i have to fix all my old images and properly crop new ones...
thanks for reading this!

well, the thing is, i have been setting the same width and height for my square crops for over a year now... the resolution problem started when i started cropping on this laptop, as opposed to my home computer (which i cannot use now as i am temporarily in another country!)...
NOTE: my pictures come out of my camera as follows: pixel dimensions 4272 X 2848 and when i crop, i always use the smaller dimension (2848)...

Similar Messages

Resolution problems when connecting an LCD to macbook

Hi all,
I've just bought a BenQ 20" wide screen LCD monitor (G2000WAD) to connect to my MacBook 13" (late 2008). I connected it with a VGA cable, converted to mini displayport.
I can't seem to set it to the optimal resolution, which for this screen is 1680x1050. The best resolution that works is 1440x900. If I try to set it to 1680x1050 the screen goes black, re-appears, goes black again, etc. The image in 1440x900 is not very sharp, that's why I'd prefer it to be on 1680x1050. I've also tried a couple of LG monitors, and they had the same problem.
Does anyone know how I can solve this? TIA!
Cheers,
Ronald

1680x1050 is sort of a strange resolution for VGA. Doesn't the display have a DVI or HDMI port? If it does have a digital input (DVI or HDMI) then it's possible that the VGA input for the BenQ just doesn't like the 1680x1050 setting (at least at the frequency and setup that is being output by the MacBook's VGA adapter). You need to check the following:
1.) Have you checked to see if Apple's mini DisplayPort to VGA adapter is running the latest firmware (Apple offered an update a few weeks ago)? Furthermore, unless you are actually connected to the VGA adapter when you run Apple's Software Update it won't notify you of the availability of the firmware update. However, note that this firmware update is only for Apple's adapter (I don't believe that it will work with any of the third-party adapters). Also, if you've purchased Apple's adapter fairly recently it may already have the latest firmware (but you'll have to check as I detailed above).
2.) Check the BenQ monitor's user manual to see what VGA resolutions and frequencies it supports.
3.) If none of the above solves your problems then you _may_ want to consider getting a mini DisplayPort to DVI adapter (if your BenQ display accepts DVI or HDMI). If you only have the option of HDMI then you can either purchase a DVI to HDMI adapter to connect to Apple's mini DisplayPort to DVI adapter or you can purchase one of the recently available mini DisplayPort to HDMI adapters from a place like monoprice.com (link follows):
http://www.monoprice.com/products/product.asp?cid=104&cp_id=10428&cs_id=1042802&pid=5311&seq=1&format=2

IMac G5 iSight - Resolution problems when using s-video output.

Good afternoon all.
I have an iMac G5 and the only video output it has is a mini VGA socket. I have used this with a mini VGA to S-Video converter cable from Apple and am getting some odd results.
The Mac is running Leopard 1.5.7 and I'm outputting to a fairly old Panasonic CRT TV.
The problem I find is that when I plug in my mini VGA adaptor to the Mac it reduces the resolution on the Mac screen down to 1024x768 (stretched). The TV outputted TV image looks great, but I can't seem to keep my native resolution of 1440x900 on the Mac display.
If I do go and change the resolution in "displays" in the sys' prefs' then it just seems to keep the 1024x768 resolution on the Mac but this time without stretching it.
Does anyone know how I can keep my Mac at its native resolution of 1440x900 while still outputting to s-video to the TV?
Any and all help will be greatly appreciated.
Thank you again in advance.
Stuart

Hi
I have the same config as you: I have been using it for years to view on my tv dvds or videos from the web.
To my knowledge there is no way to acheive what you wish: when you plug the adaptor in the mac adjust to your output source and its main display (the g5 display) will reflect that with the result that it becomes very difficult to use.
Maybe there is a way to try changing the resolution in a middlle"configuration" which would give an acceptable viewing on the tv as well as on the g5.
Personally I keep plugging and unplugging the adaptor as needed.

Display resolution problem when login

My screen dislay suddenly has resloution issue. l checked System Preference -> Display
and the resolution is set at 1280x800, which should be the correct settings. But the display still shows on lower resolution.
I reboot/shutdown, still the display is not display as 1280X800.
Then I logon with a different username, it works as normal.
Only time the display has issue is when I am using my username.
It is a MacBook Pro running OS X 10.7
Anyone running into similar problem? Please help.

Reset PRAM. http://support.apple.com/kb/PH4405
Best.

Resolution problem when printing JPanel with picture on bg

Hellow!
I have some problems with printing JPanel component. I have a picture drawn on the background of the JPanel and several buttons on it. The whole JPanel is about 1600x800px. When i print whole the component with the help of PDF virtual printer, component is printed larger than A4 list. It is strange for me because print resolution is 600 dpi, so whole component must be a rectangle with the size about 2.5x1.5 inches. When I scale the graphics before painting component to fit image to page (i mean ... {color:#ff0000}g2d.scale(sc,sc); panel.paintAll(g2d);{color} ...), the picture's quality becomes very bad.
I understod it so: I draw the component on the paper in screen resolution, then I decrease image size, so quality also decreases.
My question is: how to draw on the graphics of printing paper the component in printers resolution (600dpi), but not in screen resolution.

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

New 2012 Mac mini having screen resolution problem when I connect to either 27" LG or 22" Hannspree monitor. Tried mini display port to VGA/HDMI and HDMI to DVI-D cables... all same isse

New 2012 Mac mini having issues in connecting to third party Monitors. Connected my mac mini to a 27" LG monitor. Text looks blurred. Tried connecting to the monitor using 3 options. 1) mini port to HDMI, then HDMI cable to LG monitor. 2) Mini port to VGA, then VGA cable to monitor 3) HDMI port on mini mac to DVI-D cable then DVI to DVI cable... In all cases text is not clear. Anyone has similar issues with latest mini mac. The monitor works fine when I connect to a windows 7 Samsung laptop. Any input is highly appreciated. Thanks in Advance

Why do you use always 2 cables? There's a lot that can go wrong.
1.) Hardware:
- Use only one cable, best an HDMI->HDMI cable. It doesn't need to be an expensive one, they've proven to be no worse than those "esoteric", expensive ones.
- Set the monitor to the HDMI input.
- The modes you are listing are only "picture modes" changing color/brightness/contrast settings, not resolution or the likes, so pick the one you like best later, or enter your own settings under Custom.
2.) OS X:
- Usually the Mac detects the screen itself and chooses the best settings, so by default you need to do nothing than make a proper hardware connection to get a decent image.
- However, there have been issues with new Mac Minis and particularly their HDMI ports. But reportedly they have been fixed with a software update. So, launch the App Store and check under Updates if there is one for you to install. If so, do it; otherwise you should be good to go.
- If you require, go to System Preferences -> Displays. In the Dispaly tab, by default, "Best for display" should be selected, and that is typically true. If you want, select "Scaled" and 1920x1080, plus a frequency from the list (where higher is usually better, but just pick the one that works best for you). If you can't see a change to the better, you best go back to "Best for display".
- If you are not happy with the colors on your screen, you'll find eventually more than one choice in the Color tab, though your particular screen should be in the list and its Display Profile should get you the best result. (Double-check picture modes on your display: if you're far off there, you won't make it much better with the Mac's settings).

Currser problem when using crop & move tool

My curser has changed to a number of horizontal plus signes. It only occurs on the work surface. When I miove to the toolbar it changes to an arrow.
I can crop but cannot use the corners to change size. Please help

http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Setting_the_Windows
for the triple cursor (still applies in PSE 9). Also, the plus sign usually means your caps lock key is on.

Xorg nvidia resolution problems with KDE

I just installed Arch 2008.04-RC last night. I configured xorg.conf using nvidia with the screen resolution set to "1440x900" which worked in both the X Windows and KDE 3.5.9.
I was trying to get xine working with Amarok. At one point, I deleted ~/.xine and xinirtc to force itself to reset. I then rebooted at which point I noticed the resolution set only at "640x400" in KDE. I checked the Display Settings and that was the maximum resolution I could choose. I then switched to the vesa drivers which allowed a maximum resolution of "1024x768".
I removed xorg and nvidia and reinstalled. I can no longer get a resolution of "1440x900" resolution for my Viewsonic VA1926v flat screen monitor. I read on the xorg log that
I am using the Nvidia GeForce 7300 GT video graphics card. uname -r: 2.6.25-ARCH
From /var/log/Xorg.0.log I get the following information when I am using vesa:
(II) VESA(0): Total Memory: 4096 64KB banks (262144kB)
(II) VESA(0): Generic Monitor: Using hsync range of 30.00-82.00 kHz
(II) VESA(0): Generic Monitor: Using vrefresh range of 50.00-75.00 Hz
(II) VESA(0): Not using mode "1440x900" (no mode of this name)
(II) VESA(0): Not using mode "1280x1024" (no mode of this name)
(--) VESA(0): Virtual size is 1024x768 (pitch 1024)
(**) VESA(0): *Built-in mode "1024x768"
(**) VESA(0): *Built-in mode "800x600"
(**) VESA(0): Built-in mode "640x480"
(**) VESA(0): Built-in mode "640x400"
(**) VESA(0): Built-in mode "320x400"
(**) VESA(0): Built-in mode "320x240"
(**) VESA(0): Built-in mode "320x200"
(==) VESA(0): DPI set to (96, 96)
With nvidia, it just states that no mode is available for '1440x900' and selects virtual size of '640x400'.
My xorg.conf below:
Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen" 0 0
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
EndSection
Section "Files"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Horizsync 30.0 - 82.0
Vertrefresh 50.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "nVidia Corporation G70 [GeForce 7300 GT]"
Driver "vesa"
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation G70 [GeForce 7300 GT]"
Monitor "Generic Monitor"
Defaultdepth 24
Option "AddARGBVisuals" "True"
Option "NoLogo" "True"
Option "AddARGBGLXVisuals" "True"
Option "UseEdidDpi" "false"
Option "DPI" "96 x 96"
Option "ConnectedMonitor" "DFP"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1440x900" "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
I am at a loss at trying to fix this one. Something similar happened when I was running Gentoo on this same desktop back in April. I also have the same low resolution problem when using Sabayon.
Any help here would be much appreciated :-)

I thought these frequencies were a bit low too. My manual said there were the frequencies. I checked online and it said the same. I need to do more research on it.
I did manage to get my 1440x900 resolution back using the open source nv drivers. I had to do the same with Gentoo and Linux Mint in the past. Everytime I used the nvidia drivers, my monitor returns to the 640x400 resolution and I noticed the only way to avoid it was to use nv. I do not play games online or use Compiz so it does not bother me.
Thanks.

Slideshow crop photos problem when i close the thumbnail botton

In the slideshow i use thumbnail photo "turned on" to change the pictures (is it the only way to do it?) and manage them with crop function but when i later close thumbnail (i don't want visible) photos resize. Any suggestion ?

I have not a link yet, i'm preparing the graphic layout at the time. I bypassed the problem importing in muse the right photos size without use crop. Maybe i should see better edit photo functions tutorials. I'm new with Muse.
Il giorno 09/ago/2013, alle ore 01.37, Brad Lawryk ha scritto:
Re: slideshow crop photos problem when i close the thumbnail botton
created by Brad Lawryk in Help with using Adobe Muse CC - View the full discussion
Can you provide a link or screenshots so we can see what you are doing and what you are trying to achieve?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5579245#5579245
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5579245#5579245
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5579245#5579245. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problem when resolution change.

Hello,
I got a problem with my MSI Ti 4200 agp 8x.
When I start my computer, I have to turn on the screen (Iiyama hm704utc) after having started my computer, and after the complete download of windows xp to see a picture appearing (if I don't act this way, my screen does not turn on).
Same problem when I try to start some programs: I cannot use a program which change resolution during a session (for example a game). When I try to do it, I only get a black screen. If I come back to windows XP, I have to restart my screen to see the picture back.
I have tried to change resolution or refresh rate, but nothing has been improved.
Can someone help me, please?
Thank you,

Tricky one! Seems as if your OS hasn't got a proper driver for your screen. Either that, or perhaps your screen is no good.
To check, you can right click your screen, properties, and go to the Advanced page. See what card and what screen the computer thinks you've got!

When I crop an image all I get is a 1" gray box!

I used Photoshop Elements 4 for over 7 years with no problems. I switched to Elements 11 in January and I'm having the same recurring problem. Everything was going great with my cropping and now when I crop an image all I get is a 1" grayed out box. Can anyone help me? Thanks in advance

Hi,
It sounds like there might be some small values in the width, height or resolution boxes.
With the Crop Tool selected and pressing on the Tool Options button at the bottom of the workspace, go over to the
right side of the Tool Options and Reset the crop tool and see if that makes a difference.
Also, there is a forum dedicated to photoshop elements for future reference:
(moved from the photoshop beginners forum)
http://forums.adobe.com/community/photoshop_elements

Windows 8.1 Pro on Mac pro resolution problem

I have created a partition for windows 8.1 pro on my 13' retina display mac pro via boot camp, everything is fine except the resolution, when i open the browser, i could see pixels, the words aren't very sharp, but this isn't my biggest problem, when i open the Solidworks software i'm working on, the icons are too small, or the texts are too big for their boxes. what is happening here? anyone knows what is all about, or how to fix this? changing the resolution of the display didn't solve the problem.

This is how the words look like in the browser page, you could see pixels. The maximum resolution for this machine is 2560*1600

Resolution problem with GF4 Ti4200-TD 128MB DDR

I am having problems when I switch my display resolution to 640x480x32.
It also affects any application which runs in the affected resolution.
I tried re-installing the VGA card in its AGP slot and its drivers after removing my previous VGA card and its drivers.
The driver that i am using for the MSI VGA card, which is 4.13.2890, is already updated via LiveUpdate, which is now 4.1.3.3000
My system consists of:
AOpen AX34 Pro Motherboard
AGP 2X / 4X
Intel Pentium III 800MHz
512MB RAM
Direct X 8.1
Windows Me
Looking forward to you reply. Thank you for your help.

izel,
Get the latest Via 4in1 Drivers and try running the Card in AGP 2X. Do not expect much from the Via Apollo Pro 133 Chipset. Lots of problems with the GART.
Take Care,
Richard

XSD Resolution problem - Unable to load Translation schemas

Hi,
I've run into a very strange kind of problem (not to say some are less strange then others). Let me explain the context of the situation.
I've got a BPEL process calling two plsql packages on ORA database, one Java web service running on the same weblogic server and couple of other services (eg. notification services, jdbc select/insert, etc.). There is no problem with the last listed, but definitely something wrong with the web service and the plsql callouts.
When I deploy the BPEL process and execute it, the first two instances always fail. The same happens when I restart the server, the errors are repeated after a certain period as well (for example over night). The process always fails EXACTLY TWICE, before running normally. Every other instance executed after the two initial failures runs WITHOUT the following error.
I mentioned there are two plsql callouts in the process, earlier the first instance failed on the second one and the second instance failed on the first. Now, it mostly fails on the second callout. I've made no significant changes in the code. Perhaps the strangest thing about this is that it fails when invoking the plsql package but the error concerns xsd definitions of the web service that plays no role at this stage.
All my services are correctly deployed, I deleted all interface definitions from MDS repository and redeployed SOA bundle again before installing each service.
I think it has something to do with generated xsd definitions by the java web service (it's the http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 and http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 from following stack trace), but I can't figure out what exactly is wrong with them.
Anybody come accross a similar error? Thanks for tips, I've run out of ideas.
Error Message: {http://schemas.oracle.com/bpel/extension}bindingFault
Fault ID     default/S50001KontrolaSouboruBS!1.0*soa_be986963-f9d9-412d-b692-43804a35b3ee/KontrolaSouboru/830023-BpInv18-BpSeq8.12-2
Fault Time     14-Feb-2012 11:11:16
Non Recoverable System Fault :
<bpelFault><faultType>0</faultType><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'LogFile' failed due to: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "Could not instantiate InteractionSpec oracle.tip.adapter.db.DBStoredProcedureInteractionSpec due to: XSD Resolution problem. XSD Resolution problem. Unable to load Translation schemas from for http://xmlns.oracle.com/pcbpel/adapter/db/TST_IP/LOG_FILE/LOG_FILE/ due to: Different schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and oramds:/apps/LCRInterface/DataObjects/Common/V1/Common.xsd elementFormDefault values are differentDifferent schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and http://localhost:8001/soa-infra/services/default/S50035NotifikaceChybyBS/apps/LCRInterface/DataObjects/Common/V1/Common.xsd elementFormDefault values are differentDifferent schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and oramds:/apps/LCRInterface/DataObjects/Common/V1/DataTypes.xsd elementFormDefault values are differentDifferent schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and http://localhost:8001/soa-infra/services/default/S50035NotifikaceChybyBS/apps/LCRInterface/DataObjects/Common/V1/DataTypes.xsd elementFormDefault values are differentGlobal element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListByMaskRespDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 7] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 82] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:7] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:82] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 9] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 36] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:9] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:36] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}SaveFileDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 19] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 21] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:19] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:21] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListRespDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 11] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 51] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:11] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:51] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListByMaskDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 5] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 66] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:5] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:66] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetTextFileDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 13] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 112] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:13] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:112] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetTextFileRespDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 15] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 127] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:15] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:127] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}RenameFileDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 17] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 97] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:17] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:97] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListRespDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 115] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 52] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:117] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:54] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}RenameFileDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 175] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 98] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:177] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:100] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetTextFileRespDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 153] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 128] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:155] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:130] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListByMaskRespDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 64] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 83] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:66] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:85] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}SaveFileDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 93] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 22] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:95] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:24] Please make sure all used XML schemas are imported/included correctly. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary></part><part name="detail"><detail>Different schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and oramds:/apps/LCRInterface/DataObjects/Common/V1/Common.xsd elementFormDefault values are differentDifferent schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and http://localhost:8001/soa-infra/services/default/S50035NotifikaceChybyBS/apps/LCRInterface/DataObjects/Common/V1/Common.xsd elementFormDefault values are differentDifferent schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and oramds:/apps/LCRInterface/DataObjects/Common/V1/DataTypes.xsd elementFormDefault values are differentDifferent schema default values detected between: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=2 and http://localhost:8001/soa-infra/services/default/S50035NotifikaceChybyBS/apps/LCRInterface/DataObjects/Common/V1/DataTypes.xsd elementFormDefault values are differentGlobal element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListByMaskRespDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 7] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 82] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:7] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:82] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 9] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 36] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:9] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:36] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}SaveFileDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 19] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 21] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:19] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:21] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListRespDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 11] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 51] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:11] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:51] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListByMaskDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 5] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 66] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:5] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:66] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetTextFileDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 13] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 112] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:13] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:112] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetTextFileRespDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 15] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 127] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:15] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:127] Global element declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}RenameFileDM' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 17] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 97] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:17] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:97] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListRespDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 115] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 52] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:117] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:54] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}RenameFileDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 175] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 98] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:177] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:100] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetTextFileRespDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 153] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 128] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:155] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:130] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}GetFileListByMaskRespDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 64] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 83] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:66] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:85] Global Type declaration/definition of name '{http://xmlns.lesycr.cz/DO/PrenosSouboru/V1}SaveFileDataType' are duplicated at the following locations: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [line#: 93] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [line#: 22] There are at least two of them looking different: http://localhost:8001/S50040PrenosSouboruBS/PrenosSouboruBSSOAP11BindingPort?xsd=1 [difference starting at line#:95] oramds:/apps/LCRInterface/DataObjects/D500Proces/PrenosSouboru/V1/PrenosSouboruDM.xsd [difference starting at line#:24] </detail></part><part name="code"><code>null</code></part></bindingFault></bpelFault>

I had similar issue, when i deployed composite using Jdeveloper. The problem was with my adf-config.xml pointing to dev server and all my references in my composite.xml referring to test server.
I changed property of 'oracle.mds.persistence.stores.db.DBMetadataStore' in adf-config.xml to test server. After adf-config.xml change in Jdev my compilation went smooth.
Note: If above changes doesn't work, try restarting JDeveloper, sometimes the changes in adf-config.xml is not getting effect immediately.
Regards,
Ziaur Rahuman S
Edited by: Ziaur Rahuman on Feb 13, 2013 10:58 PM

Please read my problem when I configure Weblogic https

I want to use https protocol and SSL for my web application in Weblogic
I have a problem but I am not sure it's related to configuring Weblogic or not please if you can advice me
I use "openssl" to be my own Certificate Authority (CA)
I used this instructions for using openssl [http://www.g-loaded.eu/2005/11/10/be-your-own-ca/]
after configuring openssl I used these steps for creating my keystore
1. First I use this keytool for creating my private key and public key
keytool -genkeypair -keyalg rsa -keystore ali_keytool.jks -storepass ali120 -alias ali_alias
What is your first and last name?
[Unknown]: AliKhosravi
What is the name of your organizational unit?
[Unknown]: Boors
What is the name of your organization?
[Unknown]: software
What is the name of your City or Locality?
[Unknown]: Tehranali_keytool.jks
What is the name of your State or Province?
[Unknown]: Tehran_Province
What is the two-letter country code for this unit?
[Unknown]: IR
Is CN=AliKhosravi, OU=Boors, O=software, L=Tehran, ST=Tehran_Province, C=IR correct?
[no]: y
2. I create my CSR by this command
keytool -certreq -alias ali_alias -keystore ali_keytool.jks -storepass ali120 -file ali_keytool.csr
3. I sign the ali_keytool.csr by openssl . I do it like this :
openssl x509 -req -in ali_keytool.csr -CA certs/myca.crt -CAkey private/myca.key -out ali_keytool.crt -days 365 -CAcreateserial -CAserial my_ca.seq
4.Now my I have a signed certificate (ali_keytool.crt) and my CA certificate (myca.crt)
and I import CA certificate to my keystore
keytool -import -alias Openssl_ca -file myca.crt -keystore ali_keytool.jks -storepass ali120
5. I import the signed certificate into my keystore by alias of private key
keytool -import -alias ali_alias -file ali_keytool.crt -keystore ali_keytool.jks -storepass ali120
6. I import the CA certificate again into a new keystore for creating Trust
keytool -import -alias my_ca -file myca.crt -keystore ali_keytool_trust.jks -storepass ali120
All steps done without any errors
I used this address for help [http://www.startux.de/java/44-dealing-with-java-keystores]
Now I want to configure kestores ans ssl in Weblogic
7. I go to the Environment-->Servers-->AdminServer-->Keystore tab in wblogic
8. I set "Keystores=Custom Identity and Custom Trust", "Custom Identity Keystore = H:\trust\ali_keytool.jks" , "Custom Identity Keystore Type=jks" ,
"Custom Identity Keystore Passphrase:ali120"
"Confirm Custom Identity Keystore Passphrase=ali120"
"Custom Trust Keystore=H:\trust\ali_keytool_trust.jks" , "Custom Trust Keystore Type=jks" ,
"Custom Trust Keystore Passphrase=ali120" , "Confirm Custom Trust Keystore Passphrase=ali120"
9. Then I go to SSL tab and I set "Identity and Trust Locations=Keystores" , "Private Key Alias=ali_alias" ,"Private Key Passphrase=ali120",
"Confirm Private Key Passphrase=ali120"
10. I go to the General tab and select "SSL Listen Port Enabled"
11. I user Firefox as WebBrowser so I configure my Browser I select Tools-->Options-->ViewCertificates --> Authorities tab
and I import the server certificate here is "myca.crt the openssl certificate"
in Downloading Certificate window I select
"Trust this CA to identify web sites"
"Trust this CA to identify email users"
"Trust this CA to identify software developers"
12. I restart Weblogic
13. I try to loging in weblogic like this "https://127.0.0.1:7002/console"
The webBroser show me this warning:
This Connection is Untrusted
You have asked Firefox to connect
securely to 127.0.0.1:7002, but we can't confirm that your connection is secure.
Normally, when you try to connect securely,
sites will present trusted identification to prove that you are
going to the right place. However, this site's identity can't be verified.
What Should I Do?
If you usually connect to
this site without problems, this error could mean that someone is
trying to impersonate the site, and you shouldn't continue.
Technical Details
I Understand the Risks
I don't know why the WebBrowser show me this warning while I imported the Server Certificate
I don't know that my problem is in configuring WebLogic or FireFox WebBrowser or Keystore
If you know please advice me
Thanks

Moderator Action:
You already aked this question a couple of weeks earlier:
My problem when I enable SSL in Weblogic and I don't have a trusted CA cert
This is a user-to-user forum.
There is no obligation that anyone respond. They will answer if they choose to.
If there is a business need for a resolution, use your service contract privileges and open a support ticket with Oracle Support.
http://www.oracle.com/us/support/contact-068555.html
This duplicate forum post is locked.

Resolution problems when i crop

Similar Messages

Maybe you are looking for