Resolution problems with nvidia xserver

i'm brand new to linux. like 5 days. my nephew set this up and he's out of town for two weeks or i'd ask him. set my res to 1360x768 to match the monitor. went to desktop and everything was real small. set the font size up and it's good on everything except the xserver settings. it's so small i can't read anything.went to xconf and dropped out all resolution except 800x600. rebooted and went to desktop. now everything is large. except the nvidia xserver. it still is at 1360x768. why is the resolution different on only the xserver and how can i fix this? thank you

Not sure if it was mentioned in the link, but if you search around on the forums you'll find a method to discover the DPI of your monitor and set up fonts to have an OK size

Similar Messages

  • Problem with nvidia driver (bumblebee)

    I have problem with nvidia driver. It's not work with bumblebee. nouveau works, but nvidia not. My laptop: Clevo W110ER (i7 3612, GF GT650M).
    ----- optirun glxspheres -----
    - nouveau: works, but 3d is very slow (on Intel is better)
    - nvidia: Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please ...
    Linux kernel: 3.4~ (latest from REPO).
    How to configure it? (On Ubuntu works, on Arch not).

    Your not the only one with nividia problems
    But on a more serious note, have you tried all configuration steps outlined in the Arch Wiki?
    Moderator edit:  Picture NSFW.  It is also too big.
    User edit: Fixed with Thumbnail.
    Last edited by jwele (2012-07-04 21:00:37)

  • Hello, i have a problem with nvidia quadro k4200. in AE CS6 is not compatible? Why? Please??

    hello, i have a problem with nvidia quadro k4200. in AE CS6 is not compatible? Why? Please??

    jasonf18090788 wrote:
    i saw in the site Adobe that the video card is compatible with AE and Pr, but not work.
    Where did you see that? It's not on the list for AE: System requirements | After Effects
    Keep in mind that After Effects only uses the GPU for one, obsolete thing. GPU matters very little for AE. See this: GPU (CUDA, OpenGL) features in After Effects CS6 and After Effects CC

  • Xorg nvidia resolution problems with KDE

    I just installed Arch 2008.04-RC last night.  I configured xorg.conf using nvidia with the screen resolution set to "1440x900" which worked in both the X Windows and KDE 3.5.9. 
    I was trying to get xine working with Amarok.  At one point, I deleted ~/.xine and xinirtc to force itself to reset. I then rebooted at which point I noticed the resolution set only at "640x400" in KDE.  I checked the Display Settings and that was the maximum resolution I could choose.  I then switched to the vesa drivers which allowed a maximum resolution of "1024x768". 
    I removed xorg and nvidia and reinstalled.  I can no longer get a resolution of "1440x900" resolution for my Viewsonic VA1926v flat screen monitor.  I read on the xorg log that
    I am using the Nvidia GeForce 7300 GT video graphics card.  uname -r:  2.6.25-ARCH
    From /var/log/Xorg.0.log I get the following information when I am using vesa:
    (II) VESA(0): Total Memory: 4096 64KB banks (262144kB)
    (II) VESA(0): Generic Monitor: Using hsync range of 30.00-82.00 kHz
    (II) VESA(0): Generic Monitor: Using vrefresh range of 50.00-75.00 Hz
    (II) VESA(0): Not using mode "1440x900" (no mode of this name)
    (II) VESA(0): Not using mode "1280x1024" (no mode of this name)
    (--) VESA(0): Virtual size is 1024x768 (pitch 1024)
    (**) VESA(0): *Built-in mode "1024x768"
    (**) VESA(0): *Built-in mode "800x600"
    (**) VESA(0): Built-in mode "640x480"
    (**) VESA(0): Built-in mode "640x400"
    (**) VESA(0): Built-in mode "320x400"
    (**) VESA(0): Built-in mode "320x240"
    (**) VESA(0): Built-in mode "320x200"
    (==) VESA(0): DPI set to (96, 96)
    With nvidia, it just states that no mode is available for '1440x900' and selects virtual size of '640x400'.
    My xorg.conf below:
    Section "ServerLayout"
    Identifier "Default Layout"
    screen "Default Screen" 0 0
    Inputdevice "Generic Keyboard"
    Inputdevice "Configured Mouse"
    EndSection
    Section "Files"
    EndSection
    Section "Module"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Generic Keyboard"
    Driver "kbd"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us"
    EndSection
    Section "InputDevice"
    Identifier "Configured Mouse"
    Driver "mouse"
    Option "CorePointer"
    Option "Device" "/dev/input/mice"
    Option "Protocol" "ImPS/2"
    Option "ZAxisMapping" "4 5"
    Option "Emulate3Buttons" "true"
    EndSection
    Section "Monitor"
    Identifier "Generic Monitor"
    Horizsync 30.0 - 82.0
    Vertrefresh 50.0 - 75.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "nVidia Corporation G70 [GeForce 7300 GT]"
    Driver "vesa"
    Option "AddARGBVisuals" "True"
    Option "AddARGBGLXVisuals" "True"
    Option "NoLogo" "True"
    EndSection
    Section "Screen"
    Identifier "Default Screen"
    Device "nVidia Corporation G70 [GeForce 7300 GT]"
    Monitor "Generic Monitor"
    Defaultdepth 24
    Option "AddARGBVisuals" "True"
    Option "NoLogo" "True"
    Option "AddARGBGLXVisuals" "True"
    Option "UseEdidDpi" "false"
    Option "DPI" "96 x 96"
    Option "ConnectedMonitor" "DFP"
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1440x900" "1280x1024" "1024x768" "800x600"
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    I am at a loss at trying to fix this one.  Something similar happened when I was running Gentoo on this same desktop back in April.  I also have the same low resolution problem when using Sabayon.
    Any help here would be much appreciated :-)

    I thought these frequencies were a bit low too.  My manual said there were the frequencies.  I checked online and it said the same.  I need to do more research on it.
    I did manage to get my 1440x900 resolution back using the open source nv drivers.  I had to do the same with Gentoo and Linux Mint in the past.  Everytime I used the nvidia drivers, my monitor returns to the 640x400 resolution and I noticed the only way to avoid it was to use nv.  I do not play games online or use Compiz so it does not bother me.
    Thanks.

  • Problems with Nvidia 320.49 and Windows 8.1

    I am having problems with my HP Envy with windows 8.1... Nvidia driver keeps crashing.
    Took the unit to Best Buy and we determined it was with the 320.49 driver - we are
    able to reinstall it, and it will usually last for a few hours before it fails again.  When
    it fails, the resolution reverts to 1024 x XX... not the 1920 x 1260 when it works
    right... very frustrating, but I need to know if the card needs replacement, or if there
    is a fix from Nvidia... Contacted Nvidia and did not get anywhere with them.... can anyone
    help??

    Thank you for the additional information.
    If it is an HP OEM video card, this is the reason that it is not working with the retail nVidia driver.  HP has their motherboards and video cards made to their specs.  Only the drivers developed by them will work with their cards.
    Here are the drivers available for Win 8.1 on the Software & driver download page.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Resolution problems with Acer aspire 5520

    Hello,
    I'm having trouble making both tty and Xorg resolution be native. I have an nVidia 7000M gpu.With nouveau drivers I managed to get KMS working, but realized Xorg resolution is wrong. If I set the right resolution with xrandr the problem with tiling WMs similar to what I explained in this thread. What is different is mouse can go to the blank part and still be visible, floating windows could be placed in the blank area or resized to full screen, but WM won't ever place windows there. Some tiling WMs are able to utilize the full width of the screen. WMs that do not work like this are dwm, wmii and musca.
    Dwm has problems displaying conky in its bar (cuts of a lot of output). This made me think the problem is not the resolution/driver and, dwm being my favourite WM, helped hiding the problem.
    Wmii utilises the whole screen after change of resolution, but leaves an unmovable vertical line where right edge of a window used to be prior to resolution change.
    Musca just works, but could take some getting used to.
    All floating WMs work perfectly.
    Then I tried nVidia closed source drivers, which worked perfectly in Xorg. The problem was no KMS. I installed and enabled uvesafb, but it did not change the maximum tty resolution from 1024x768.
    The WMs I tried:
    dwm
    fluxbox
    i3
    musca
    snapwm
    spectrwmsubtle
    A lot of others I either did not like, or they required some configuration to even start
    What I tried to fix the problem: various xrandr options (with nouveau), various kernel command line options (with nvidia) and what was mentioned in arch wiki about screen xorg configuration. Nothing I did to "/etc/X11/xorg.conf.d/10-screen.conf" had any effect so I just deleted the file to ease switching between nouveau and nvidia.
    As to which driver I intend to use... I don't care as long as it can display everything correctly.
    P.S.
    /etc/modprobe.d/uvesafb.conf has only one lien
    options uvesafb mode_option=1280x800-32 scroll=ywrap
    cat /sys/bus/platform/drivers/uvesafb/uvesafb.0/vbe_modes
    says top resolution is 1024x768.
    EDIT:
    Just now I've tried every tiling WM I could find, and the ones working are echinus, musca and qtile.
    Last edited by bstaletic (2015-05-30 18:11:25)

    Mr.Elendig wrote:https://wiki.archlinux.org/index.php/Bu … l.2FNVIDIA
    Didn't work.... Already said I tried it

  • Tty display problems with nvidia and uvesafb

    I'm trying to get my console to display correctly at 1080p; trying to do so through GRUB was always an absolute nightmare.
    The console displays fine with nouveau, but nouveau causes the infamous pink line bug, which is simply too irritating to ignore; nouveau is not an option.
    In the past, my console has run at low res and incorrect scale with nvidia, but I've ignored the problem since I prefer to use a virtual terminal in X.
    Now, if possible, I need to use the actual console for the purposes of module development.
    I installed v86d and uvesafb and configured the console for 1920x1080 and 32 bit depth.
    The console is displaying with the correct resolution now, but is surrounded by a black border, making the font distorted and extremely difficult to read.
    How can I get my console to scale correctly to fullscreen? Any ideas at all. I found nothing in the forums or wiki, and I'm out.
    I'm fairly certain there are no vga or video settings in GRUB that are interfering.

    Output of "pacman -Qi nvidia"
    Name : nvidia
    Version : 343.36-2
    Description : NVIDIA drivers for linux
    Architecture : x86_64
    URL : http://www.nvidia.com/
    Licenses : custom
    Groups : None
    Provides : None
    Depends On : linux>=3.17 linux<3.18 nvidia-libgl nvidia-utils=343.36
    Optional Deps : None
    Required By : None
    Optional For : None
    Conflicts With : None
    Replaces : None
    Installed Size : 5.30 MiB
    Packager : Felix Yan <[email protected]>
    Build Date : Thu 11 Dec 2014 08:32:19 AM CST
    Install Date : Fri 12 Dec 2014 12:10:32 AM CST
    Install Reason : Explicitly installed
    Install Script : Yes
    Validated By : Signature
    Output "cat /boot/grub/grub.cfg"
    # DO NOT EDIT THIS FILE
    # It is automatically generated by grub-mkconfig using templates
    # from /etc/grub.d and settings from /etc/default/grub
    ### BEGIN /etc/grub.d/00_header ###
    insmod part_gpt
    insmod part_msdos
    if [ -s $prefix/grubenv ]; then
    load_env
    fi
    if [ "${next_entry}" ] ; then
    set default="${next_entry}"
    set next_entry=
    save_env next_entry
    set boot_once=true
    else
    set default="0"
    fi
    if [ x"${feature_menuentry_id}" = xy ]; then
    menuentry_id_option="--id"
    else
    menuentry_id_option=""
    fi
    export menuentry_id_option
    if [ "${prev_saved_entry}" ]; then
    set saved_entry="${prev_saved_entry}"
    save_env saved_entry
    set prev_saved_entry=
    save_env prev_saved_entry
    set boot_once=true
    fi
    function savedefault {
    if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
    fi
    function load_video {
    if [ x$feature_all_video_module = xy ]; then
    insmod all_video
    else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
    fi
    set menu_color_normal=green/black
    set menu_color_highlight=black/green
    if [ x$feature_default_font_path = xy ] ; then
    font=unicode
    else
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
    else
    search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
    fi
    font="/usr/share/grub/unicode.pf2"
    fi
    if loadfont $font ; then
    set gfxmode=auto
    load_video
    insmod gfxterm
    set locale_dir=$prefix/locale
    set lang=en_US
    insmod gettext
    fi
    terminal_input console
    terminal_output gfxterm
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
    else
    search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
    fi
    insmod png
    background_image -m stretch /boot/grub/archgrub.png
    if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=5
    # Fallback normal timeout code in case the timeout_style feature is
    # unavailable.
    else
    set timeout=5
    fi
    ### END /etc/grub.d/00_header ###
    ### BEGIN /etc/grub.d/10_linux ###
    menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-337acc84-0300-43b1-b426-79391d39e898' {
    load_video
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
    else
    search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
    fi
    echo 'Loading Linux linux ...'
    linux /boot/vmlinuz-linux root=UUID=337acc84-0300-43b1-b426-79391d39e898 rw quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux.img
    submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-337acc84-0300-43b1-b426-79391d39e898' {
    menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-337acc84-0300-43b1-b426-79391d39e898' {
    load_video
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
    else
    search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
    fi
    echo 'Loading Linux linux ...'
    linux /boot/vmlinuz-linux root=UUID=337acc84-0300-43b1-b426-79391d39e898 rw quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux.img
    menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-337acc84-0300-43b1-b426-79391d39e898' {
    load_video
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 337acc84-0300-43b1-b426-79391d39e898
    else
    search --no-floppy --fs-uuid --set=root 337acc84-0300-43b1-b426-79391d39e898
    fi
    echo 'Loading Linux linux ...'
    linux /boot/vmlinuz-linux root=UUID=337acc84-0300-43b1-b426-79391d39e898 rw quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux-fallback.img
    ### END /etc/grub.d/10_linux ###
    ### BEGIN /etc/grub.d/20_linux_xen ###
    ### END /etc/grub.d/20_linux_xen ###
    ### BEGIN /etc/grub.d/30_os-prober ###
    ### END /etc/grub.d/30_os-prober ###
    ### BEGIN /etc/grub.d/40_custom ###
    # This file provides an easy way to add custom menu entries. Simply type the
    # menu entries you want to add after this comment. Be careful not to change
    # the 'exec tail' line above.
    ### END /etc/grub.d/40_custom ###
    ### BEGIN /etc/grub.d/41_custom ###
    if [ -f ${config_directory}/custom.cfg ]; then
    source ${config_directory}/custom.cfg
    elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
    source $prefix/custom.cfg;
    fi
    ### END /etc/grub.d/41_custom ###
    ### BEGIN /etc/grub.d/60_memtest86+ ###
    ### END /etc/grub.d/60_memtest86+ ###
    Output "cat /usr/lib/modprobe.d/uvesafb.conf"
    Video mode is set as "1920x1080-32".
    # This file sets the parameters for uvesafb module.
    # The following format should be used:
    # options uvesafb mode=<xres>x<yres>[-<bpp>][@<refresh>] scroll=<ywrap|ypan|redraw> ...
    # For more details see:
    # http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=blob;f=Documentation/fb/uvesafb.txt
    options uvesafb mode_option=1920x1080-32 scroll=ywrap
    This file is mirrored in /etc/modprobe.d/uvesafb.conf.
    Running "diff /usr/lib/modprobe.d/uvesafb.conf /etc/modprobe.d/uvesafb.conf" returns no output.
    Output of "cat /sys/class/graphics/fb0/virtual_size" is solely "1920,1080".
    ---edit---
    Output of "cat /etc/default/grub" in case it's helpful.
    GRUB_DEFAULT=0
    GRUB_TIMEOUT=5
    GRUB_DISTRIBUTOR="Arch"
    GRUB_CMDLINE_LINUX_DEFAULT="quiet"
    GRUB_CMDLINE_LINUX=""
    # Preload both GPT and MBR modules so that they are not missed
    GRUB_PRELOAD_MODULES="part_gpt part_msdos"
    # Uncomment to enable Hidden Menu, and optionally hide the timeout count
    #GRUB_HIDDEN_TIMEOUT=5
    #GRUB_HIDDEN_TIMEOUT_QUIET=true
    # Uncomment to use basic console
    GRUB_TERMINAL_INPUT=console
    # Uncomment to disable graphical terminal
    #GRUB_TERMINAL_OUTPUT=console
    # The resolution used on graphical terminal
    # note that you can use only modes which your graphic card supports via VBE
    # you can see them in real GRUB with the command `vbeinfo'
    GRUB_GFXMODE=auto
    # Uncomment to allow the kernel use the same resolution used by grub
    #GRUB_GFXPAYLOAD_LINUX=keep
    # Uncomment if you want GRUB to pass to the Linux kernel the old parameter
    # format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
    #GRUB_DISABLE_LINUX_UUID=true
    # Uncomment to disable generation of recovery mode menu entries
    GRUB_DISABLE_RECOVERY=true
    # Uncomment and set to the desired menu colors. Used by normal and wallpaper
    # modes only. Entries specified as foreground/background.
    GRUB_COLOR_NORMAL="green/black"
    GRUB_COLOR_HIGHLIGHT="black/green"
    # Uncomment one of them for the gfx desired, a image background or a gfxtheme
    GRUB_BACKGROUND="/boot/grub/archgrub.png"
    #GRUB_THEME="/path/to/gfxtheme"
    # Uncomment to get a beep at GRUB start
    #GRUB_INIT_TUNE="480 440 1"
    #GRUB_SAVEDEFAULT="true"
    Also, it might help to describe the behaviour more specifically / more in depth...
    The rendered part of the console occupies the same space as the GRUB boot menu.
    I installed and configured virtualbox a few weeks previously.
    I ran "sudo depmod -a" as the wiki / forums indicated it could remedy problems with virtual machines failing to start.
    It did fix the virtualbox problem; after reboot, suddenly lightdm *also* initally occupied the same window space as grub.
    That was new behaviour. When I logged in to xmonad, the desktop displayed similarly to GRUB.
    I hadn't tried fixing it; logging in with root followed by "ps -e | grep X" and "kill -9 <Xpid>" caused X as a whole to start behaving and scaling normally.
    I haven't rebooted until attempting to rectify the issue with my console.
    The oddity with scaling in lightdm and xmonad still shows up after reboot and is still reparable by killing X.
    Killing X doesn't - obviously - have any effect on console scale.
    ---/edit---
    d(-_-)
    Last edited by seppukuzushi (2014-12-31 14:01:23)

  • Problem with NVIDIA GeForce4 MX

    I have a Quicksilver G4 Dual 1G It has a NVIDIA GeForce4 MX with 64MB Graphis Card
    The old 19 CTR Monitor kept on switching itself on and off and occasionally freezing the computer I borrowed a 19 inch Formac LCD monitor which seem to work fine.
    I the bought the Formac Raven 2010 When i put this on the mac the start up screen was a little rectangle in the center of the screen Then i would get the blue screen and flash between the that and the desk top, then the computer would crash with the darkend screen and the restart message.
    I tried a back up and install to no effect then tried a to do a clean install a on a second disc but the computer kept on crashing during the install process.
    Thinking that this must be a hardware problem I borrowed the 19 inch Formac again and the computer functions normally again i finished a complete new installation. the computer ran well all night only one crash. I Then put the raven back on it worked for about an hour then the crashing started again, it won't start up.
    The only thing i can think of is the card must be damaged in some way. Which may be the cause of the problems with the CRT as this was set on a very high resolution. The 19" Formac must work at a resolution that is not a problem for the card. The higher resolution of the Formac Raven must put the card in to an area which it can no longer cope with.
    The Card is specified as the minimum specification for the Raven I have run Teach Tech Pro Delux on the computer and that say the ram is fine.
    I have found that there is a rom upgrade for this card to use the ACD screens should i run this upgrade or should I buy a new AGP Graphics Card.
    Any help or thoughts appreciated
    Graeme

    Check to see if the cards fan is working, if not, it may be overheating. Generally speaking though, and overheating card would just lock up the machine and you wouldn't get a kernel panic. It sounds as if the problem is with the card in this case, but it may just be a sign of something else. I suggest searching the support forum for subjects relating to fixing kernel panics, and try everything before tossing the video card. If you do need to replace it, GeForce4 MX cards are hard to come by (the Mac version anyway) and tend to be more expensive than similarly preforming ATI cards.

  • Resolution problem with GF4 Ti4200-TD 128MB DDR

    I am having problems when I switch my display resolution to 640x480x32.
    It also affects any application which runs in the affected resolution.
    I tried re-installing the VGA card in its AGP slot and its drivers after removing my previous VGA card and its drivers.
    The driver that i am using for the MSI VGA card, which is 4.13.2890, is already updated via LiveUpdate, which is now 4.1.3.3000
    My system consists of:
      AOpen AX34 Pro Motherboard
      AGP 2X / 4X
      Intel Pentium III 800MHz
      512MB RAM
      Direct X 8.1
      Windows Me
    Looking forward to you reply. Thank you for your help.

    izel,
    Get the latest Via 4in1 Drivers and try running the Card in AGP 2X.  Do not expect much from the Via Apollo Pro 133 Chipset.  Lots of problems with the GART.
    Take Care,
    Richard

  • [SOLVED?] Problem with nVidia card

    This is my first post, so; hello to everyone!! Thx in advance to this great community!!
    My problem is pretty strange and anoying. I have an nVidia 8600GT in a Abit AX78 MB running Arch with KDE. Anything is going right until logon process. I write the user and password in KDM screen and then, after de animation of init proces of KDE, all graphics displayed are corrupted (a rectangle in the upper left corner is showed) and that's it. Only work the mouse pointer.
    This malfunction its showed by the nouveau driver AND the proprietary driver... So i think the problem is it in other place than the driver of the card.
    The Xorg.0.log and dmesg.log files are atached at the end of this thread.
    I hope that annyone can help me.
    Thx in advance again.
    The Xorg.0.log file contains this:
    [ 15.809]
    X.Org X Server 1.10.3
    Release Date: 2011-07-08
    [ 15.814] X Protocol Version 11, Revision 0
    [ 15.814] Build Operating System: Linux 2.6.39-ARCH i686
    [ 15.814] Current Operating System: Linux hidramedia_host 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011 i686
    [ 15.815] Kernel command line: root=/dev/sda5 ro
    [ 15.815] Build Date: 09 July 2011 07:57:07AM
    [ 15.815]
    [ 15.815] Current version of pixman: 0.22.2
    [ 15.815] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 15.815] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 15.815] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 1 14:13:23 2011
    [ 15.829] (==) Using config file: "/etc/X11/xorg.conf"
    [ 15.829] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 15.835] (==) ServerLayout "Layout0"
    [ 15.835] (**) |-->Screen "Screen0" (0)
    [ 15.835] (**) | |-->Monitor "Monitor0"
    [ 15.836] (**) | |-->Device "Device0"
    [ 15.836] (**) |-->Input Device "Keyboard0"
    [ 15.836] (**) |-->Input Device "Mouse0"
    [ 15.836] (==) Automatically adding devices
    [ 15.836] (==) Automatically enabling devices
    [ 15.859] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [ 15.859] Entry deleted from font path.
    [ 15.859] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 15.859] Entry deleted from font path.
    [ 15.859] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 15.859] Entry deleted from font path.
    [ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 15.859] Entry deleted from font path.
    [ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 15.859] Entry deleted from font path.
    [ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 15.859] (==) FontPath set to:
    /usr/share/fonts/misc/
    [ 15.859] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 15.859] (**) Extension "Composite" is disabled
    [ 15.859] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 15.859] (WW) Disabling Keyboard0
    [ 15.859] (WW) Disabling Mouse0
    [ 15.859] (II) Loader magic: 0x822e1a0
    [ 15.859] (II) Module ABI versions:
    [ 15.859] X.Org ANSI C Emulation: 0.4
    [ 15.859] X.Org Video Driver: 10.0
    [ 15.859] X.Org XInput driver : 12.2
    [ 15.859] X.Org Server Extension : 5.0
    [ 15.860] (--) PCI:*(0:1:0:0) 10de:0402:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
    [ 15.860] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 15.860] (II) LoadModule: "extmod"
    [ 15.871] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 15.880] (II) Module extmod: vendor="X.Org Foundation"
    [ 15.880] compiled for 1.10.3, module version = 1.0.0
    [ 15.880] Module class: X.Org Server Extension
    [ 15.880] ABI class: X.Org Server Extension, version 5.0
    [ 15.880] (II) Loading extension MIT-SCREEN-SAVER
    [ 15.880] (II) Loading extension XFree86-VidModeExtension
    [ 15.880] (II) Loading extension XFree86-DGA
    [ 15.880] (II) Loading extension DPMS
    [ 15.880] (II) Loading extension XVideo
    [ 15.880] (II) Loading extension XVideo-MotionCompensation
    [ 15.880] (II) Loading extension X-Resource
    [ 15.880] (II) LoadModule: "dbe"
    [ 15.880] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 15.881] (II) Module dbe: vendor="X.Org Foundation"
    [ 15.881] compiled for 1.10.3, module version = 1.0.0
    [ 15.881] Module class: X.Org Server Extension
    [ 15.881] ABI class: X.Org Server Extension, version 5.0
    [ 15.881] (II) Loading extension DOUBLE-BUFFER
    [ 15.881] (II) LoadModule: "glx"
    [ 15.881] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 16.640] (II) Module glx: vendor="NVIDIA Corporation"
    [ 16.640] compiled for 4.0.2, module version = 1.0.0
    [ 16.640] Module class: X.Org Server Extension
    [ 16.640] (II) NVIDIA GLX Module 275.21 Mon Jul 18 14:55:52 PDT 2011
    [ 16.640] (II) Loading extension GLX
    [ 16.640] (II) LoadModule: "record"
    [ 16.641] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 16.645] (II) Module record: vendor="X.Org Foundation"
    [ 16.645] compiled for 1.10.3, module version = 1.13.0
    [ 16.645] Module class: X.Org Server Extension
    [ 16.645] ABI class: X.Org Server Extension, version 5.0
    [ 16.645] (II) Loading extension RECORD
    [ 16.645] (II) LoadModule: "dri"
    [ 16.645] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 16.661] (II) Module dri: vendor="X.Org Foundation"
    [ 16.661] compiled for 1.10.3, module version = 1.0.0
    [ 16.661] ABI class: X.Org Server Extension, version 5.0
    [ 16.661] (II) Loading extension XFree86-DRI
    [ 16.661] (II) LoadModule: "dri2"
    [ 16.661] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 16.662] (II) Module dri2: vendor="X.Org Foundation"
    [ 16.662] compiled for 1.10.3, module version = 1.2.0
    [ 16.662] ABI class: X.Org Server Extension, version 5.0
    [ 16.662] (II) Loading extension DRI2
    [ 16.662] (II) LoadModule: "nvidia"
    [ 16.662] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 16.709] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 16.709] compiled for 4.0.2, module version = 1.0.0
    [ 16.709] Module class: X.Org Video Driver
    [ 16.732] (II) NVIDIA dlloader X Driver 275.21 Mon Jul 18 14:38:30 PDT 2011
    [ 16.737] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 16.740] (++) using VT number 7
    [ 16.751] (II) Loading sub module "fb"
    [ 16.751] (II) LoadModule: "fb"
    [ 16.751] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 16.762] (II) Module fb: vendor="X.Org Foundation"
    [ 16.762] compiled for 1.10.3, module version = 1.0.0
    [ 16.762] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 16.762] (II) Loading sub module "wfb"
    [ 16.762] (II) LoadModule: "wfb"
    [ 16.763] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 16.769] (II) Module wfb: vendor="X.Org Foundation"
    [ 16.769] compiled for 1.10.3, module version = 1.0.0
    [ 16.769] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 16.769] (II) Loading sub module "ramdac"
    [ 16.769] (II) LoadModule: "ramdac"
    [ 16.769] (II) Module "ramdac" already built-in
    [ 16.771] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 16.771] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 16.771] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 16.780] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 16.780] (==) NVIDIA(0): RGB weight 888
    [ 16.780] (==) NVIDIA(0): Default visual is TrueColor
    [ 16.780] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 17.785] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
    [ 17.785] (II) NVIDIA(GPU-0): 3D Vision stereo.
    [ 17.789] (II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:1:0:0 (GPU-0)
    [ 17.789] (--) NVIDIA(0): Memory: 262144 kBytes
    [ 17.789] (--) NVIDIA(0): VideoBIOS: 60.84.35.00.00
    [ 17.789] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 17.789] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 17.789] (--) NVIDIA(0): Connected display device(s) on GeForce 8600 GT at PCI:1:0:0
    [ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0)
    [ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
    [ 17.859] (II) NVIDIA(0): Assigned Display Device: CRT-0
    [ 17.859] (==) NVIDIA(0):
    [ 17.859] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 17.859] (==) NVIDIA(0): will be used as the requested mode.
    [ 17.859] (==) NVIDIA(0):
    [ 17.859] (II) NVIDIA(0): Validated modes:
    [ 17.859] (II) NVIDIA(0): "nvidia-auto-select"
    [ 17.859] (II) NVIDIA(0): Virtual screen size determined to be 800 x 600
    [ 17.900] (--) NVIDIA(0): DPI set to (72, 72); computed from "UseEdidDpi" X config
    [ 17.900] (--) NVIDIA(0): option
    [ 17.900] (--) Depth 24 pixmap format is 32 bpp
    [ 17.901] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 17.905] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 17.905] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 17.905] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 17.905] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 17.905] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 17.905] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 17.905] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 17.905] (II) NVIDIA(0): Config Options in the README.
    [ 17.908] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [ 17.946] (II) Loading extension NV-GLX
    [ 18.001] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 18.002] (==) NVIDIA(0): Backing store disabled
    [ 18.002] (==) NVIDIA(0): Silken mouse enabled
    [ 18.002] (**) NVIDIA(0): DPMS enabled
    [ 18.002] (II) Loading extension NV-CONTROL
    [ 18.003] (II) Loading extension XINERAMA
    [ 18.003] (II) Loading sub module "dri2"
    [ 18.003] (II) LoadModule: "dri2"
    [ 18.003] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 18.003] (II) Module dri2: vendor="X.Org Foundation"
    [ 18.003] compiled for 1.10.3, module version = 1.2.0
    [ 18.003] ABI class: X.Org Server Extension, version 5.0
    [ 18.003] (II) NVIDIA(0): [DRI2] Setup complete
    [ 18.003] (==) RandR enabled
    [ 18.003] (II) Initializing built-in extension Generic Event Extension
    [ 18.003] (II) Initializing built-in extension SHAPE
    [ 18.003] (II) Initializing built-in extension MIT-SHM
    [ 18.003] (II) Initializing built-in extension XInputExtension
    [ 18.003] (II) Initializing built-in extension XTEST
    [ 18.003] (II) Initializing built-in extension BIG-REQUESTS
    [ 18.003] (II) Initializing built-in extension SYNC
    [ 18.003] (II) Initializing built-in extension XKEYBOARD
    [ 18.003] (II) Initializing built-in extension XC-MISC
    [ 18.003] (II) Initializing built-in extension SECURITY
    [ 18.003] (II) Initializing built-in extension XINERAMA
    [ 18.003] (II) Initializing built-in extension XFIXES
    [ 18.003] (II) Initializing built-in extension RENDER
    [ 18.003] (II) Initializing built-in extension RANDR
    [ 18.003] (II) Initializing built-in extension COMPOSITE
    [ 18.003] (II) Initializing built-in extension DAMAGE
    [ 18.005] (II) Initializing extension GLX
    [ 18.213] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 18.213] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 18.213] (II) LoadModule: "evdev"
    [ 18.213] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.214] (II) Module evdev: vendor="X.Org Foundation"
    [ 18.214] compiled for 1.10.0, module version = 2.6.0
    [ 18.214] Module class: X.Org XInput Driver
    [ 18.214] ABI class: X.Org XInput driver, version 12.2
    [ 18.214] (II) Using input driver 'evdev' for 'Power Button'
    [ 18.214] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.214] (**) Power Button: always reports core events
    [ 18.214] (**) Power Button: Device: "/dev/input/event3"
    [ 18.226] (--) Power Button: Found keys
    [ 18.226] (II) Power Button: Configuring as keyboard
    [ 18.226] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 18.226] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 18.226] (**) Option "xkb_rules" "evdev"
    [ 18.226] (**) Option "xkb_model" "evdev"
    [ 18.226] (**) Option "xkb_layout" "us"
    [ 18.252] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 18.252] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 18.252] (II) Using input driver 'evdev' for 'Power Button'
    [ 18.252] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.252] (**) Power Button: always reports core events
    [ 18.252] (**) Power Button: Device: "/dev/input/event2"
    [ 18.266] (--) Power Button: Found keys
    [ 18.266] (II) Power Button: Configuring as keyboard
    [ 18.266] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
    [ 18.266] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 18.266] (**) Option "xkb_rules" "evdev"
    [ 18.266] (**) Option "xkb_model" "evdev"
    [ 18.266] (**) Option "xkb_layout" "us"
    [ 18.271] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/event1)
    [ 18.271] (**) Primax Electronics Wireless Mouse: Applying InputClass "evdev pointer catchall"
    [ 18.271] (II) Using input driver 'evdev' for 'Primax Electronics Wireless Mouse'
    [ 18.271] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.271] (**) Primax Electronics Wireless Mouse: always reports core events
    [ 18.271] (**) Primax Electronics Wireless Mouse: Device: "/dev/input/event1"
    [ 18.283] (--) Primax Electronics Wireless Mouse: Found 3 mouse buttons
    [ 18.283] (--) Primax Electronics Wireless Mouse: Found scroll wheel(s)
    [ 18.283] (--) Primax Electronics Wireless Mouse: Found relative axes
    [ 18.283] (--) Primax Electronics Wireless Mouse: Found x and y relative axes
    [ 18.283] (II) Primax Electronics Wireless Mouse: Configuring as mouse
    [ 18.283] (II) Primax Electronics Wireless Mouse: Adding scrollwheel support
    [ 18.283] (**) Primax Electronics Wireless Mouse: YAxisMapping: buttons 4 and 5
    [ 18.283] (**) Primax Electronics Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 18.283] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1/event1"
    [ 18.283] (II) XINPUT: Adding extended input device "Primax Electronics Wireless Mouse" (type: MOUSE)
    [ 18.283] (II) Primax Electronics Wireless Mouse: initialized for relative axes.
    [ 18.283] (**) Primax Electronics Wireless Mouse: (accel) keeping acceleration scheme 1
    [ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration profile 0
    [ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration factor: 2.000
    [ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration threshold: 4
    [ 18.283] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/mouse0)
    [ 18.283] (II) No input driver/identifier specified (ignoring)
    [ 18.285] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
    [ 18.285] (II) No input driver/identifier specified (ignoring)
    [ 18.285] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event6)
    [ 18.285] (II) No input driver/identifier specified (ignoring)
    [ 18.286] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 18.286] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 18.286] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 18.286] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.286] (**) AT Translated Set 2 keyboard: always reports core events
    [ 18.286] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 18.300] (--) AT Translated Set 2 keyboard: Found keys
    [ 18.300] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 18.300] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 18.300] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [ 18.300] (**) Option "xkb_rules" "evdev"
    [ 18.300] (**) Option "xkb_model" "evdev"
    [ 18.300] (**) Option "xkb_layout" "us"
    [ 18.300] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 18.300] (II) No input driver/identifier specified (ignoring)
    [ 1563.531] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [ 1563.587] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 1563.587] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 1563.587] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 1563.587] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 1563.587] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 1563.587] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 1563.587] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 1563.587] (II) NVIDIA(0): Config Options in the README.
    And the dmesg.log file contains this:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
    [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
    [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.5 present.
    [ 0.000000] DMI: . ./AX78(AMD770+SB600), BIOS 6.00 PG 01/17/2008
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-C7FFF write-protect
    [ 0.000000] C8000-CFFFF uncachable
    [ 0.000000] D0000-D3FFF write-back
    [ 0.000000] D4000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask FF80000000 write-back
    [ 0.000000] 1 disabled
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00f41f0] f41f0
    [ 0.000000] initial memory mapped : 0 - 01c00000
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
    [ 0.000000] RAMDISK: 7fdc9000 - 7ffe0000
    [ 0.000000] Allocated new RAMDISK: 375e7000 - 377fd792
    [ 0.000000] Move RAMDISK from 000000007fdc9000 - 000000007ffdf791 to 375e7000 - 377fd791
    [ 0.000000] ACPI: RSDP 000f81d0 00024 (v02 AMD770)
    [ 0.000000] ACPI: RSDT 7fff3000 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: FACP 7fff3080 00074 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: DSDT 7fff3100 051E2 (v01 AMD770 AWRDACPI 00001000 MSFT 03000000)
    [ 0.000000] ACPI: FACS 7fff0000 00040
    [ 0.000000] ACPI: SSDT 7fff83c0 002CC (v01 PTLTD POWERNOW 00000001 LTP 00000001)
    [ 0.000000] ACPI: HPET 7fff86c0 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000098)
    [ 0.000000] ACPI: MCFG 7fff8700 0003C (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: APIC 7fff8300 00084 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1159MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0007fff0
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0007fff0
    [ 0.000000] On node 0 totalpages: 524159
    [ 0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f65e6200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 2320 pages used for memmap
    [ 0.000000] HighMem zone: 294626 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] Detected use of extended apic ids on hypertransport bus
    [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27648 r0 d21504 u1048576
    [ 0.000000] pcpu-alloc: s27648 r0 d21504 u1048576 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063
    [ 0.000000] Kernel command line: root=/dev/sda5 ro
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 8388096 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0007fff0)
    [ 0.000000] Memory: 2062632k/2097088k available (3376k kernel code, 34004k reserved, 1390k data, 512k init, 1187784k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc14a8000 - 0xc1528000 ( 512 kB)
    [ 0.000000] .data : 0xc134c3bf - 0xc14a7c00 (1390 kB)
    [ 0.000000] .text : 0xc1000000 - 0xc134c3bf (3376 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptable hierarchical RCU implementation.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:512
    [ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration failed
    [ 0.000000] TSC: Unable to calibrate against PIT
    [ 0.000000] TSC: using HPET reference calibration
    [ 0.000000] Detected 2700.236 MHz processor.
    [ 0.000000] Marking TSC unstable due to TSCs unsynchronized
    [ 0.016736] Calibrating delay loop (skipped), value calculated using timer frequency.. 5402.49 BogoMIPS (lpj=9000786)
    [ 0.016870] pid_max: default: 32768 minimum: 301
    [ 0.016983] Security Framework initialized
    [ 0.017051] AppArmor: AppArmor disabled by boot time parameter
    [ 0.017144] Mount-cache hash table entries: 512
    [ 0.017404] Initializing cgroup subsys ns
    [ 0.017471] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [ 0.017549] Initializing cgroup subsys cpuacct
    [ 0.017625] Initializing cgroup subsys memory
    [ 0.017701] Initializing cgroup subsys devices
    [ 0.017767] Initializing cgroup subsys freezer
    [ 0.017833] Initializing cgroup subsys net_cls
    [ 0.017899] Initializing cgroup subsys blkio
    [ 0.017995] CPU: Physical Processor ID: 0
    [ 0.018060] CPU: Processor Core ID: 0
    [ 0.018126] mce: CPU supports 5 MCE banks
    [ 0.018199] using C1E aware idle routine
    [ 0.019127] ACPI: Core revision 20110316
    [ 0.023362] ftrace: allocating 15225 entries in 30 pages
    [ 0.026734] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.027332] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.061631] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
    [ 0.063329] Performance Events: AMD PMU driver.
    [ 0.063329] ... version: 0
    [ 0.063329] ... bit width: 48
    [ 0.063329] ... generic registers: 4
    [ 0.063329] ... value mask: 0000ffffffffffff
    [ 0.063329] ... max period: 00007fffffffffff
    [ 0.063329] ... fixed-purpose events: 0
    [ 0.063329] ... event mask: 000000000000000f
    [ 0.080086] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.106674] CPU 1 irqstacks, hard=f54b4000 soft=f54b6000
    [ 0.106676] Booting Node 0, Processors #1
    [ 0.106783] smpboot cpu 1: start_ip = 9b000
    [ 0.019998] Initializing CPU#1
    [ 0.200085] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.206657] Brought up 2 CPUs
    [ 0.206721] Total of 2 processors activated (10805.88 BogoMIPS).
    [ 0.207206] devtmpfs: initialized
    [ 0.207206] PM: Registering ACPI NVS region at 7fff0000 (12288 bytes)
    [ 0.207649] print_constraints: dummy:
    [ 0.207764] NET: Registered protocol family 16
    [ 0.207919] node 0 link 0: io port [c000, ffff]
    [ 0.207922] TOM: 0000000080000000 aka 2048M
    [ 0.207987] node 0 link 0: mmio [a0000, bffff]
    [ 0.207990] node 0 link 0: mmio [80000000, dfffffff]
    [ 0.207992] node 0 link 0: mmio [f0000000, fe02ffff]
    [ 0.207995] node 0 link 0: mmio [e0000000, e03fffff]
    [ 0.207997] bus: [00, 03] on node 0 link 0
    [ 0.208000] bus: 00 index 0 [io 0x0000-0xffff]
    [ 0.208002] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
    [ 0.208003] bus: 00 index 2 [mem 0x80000000-0xefffffff]
    [ 0.208005] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
    [ 0.208011] ACPI: bus type pci registered
    [ 0.208149] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.208227] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.208292] PCI: Using MMCONFIG for extended config space
    [ 0.208357] PCI: Using configuration type 1 for base access
    [ 0.208842] bio: create slab <bio-0> at 0
    [ 0.210574] ACPI: EC: Look up EC in DSDT
    [ 0.211181] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.214150] ACPI: Interpreter enabled
    [ 0.214220] ACPI: (supports S0 S3 S4 S5)
    [ 0.214501] ACPI: Using IOAPIC for interrupt routing
    [ 0.225790] ACPI: No dock devices found.
    [ 0.225854] HEST: Table not found.
    [ 0.225919] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.226037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.226190] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.226257] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    [ 0.226324] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.226399] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
    [ 0.226474] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff]
    [ 0.226562] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
    [ 0.226576] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
    [ 0.226609] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
    [ 0.226636] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.226639] pci 0000:00:02.0: PME# disabled
    [ 0.226667] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
    [ 0.226693] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
    [ 0.226696] pci 0000:00:0a.0: PME# disabled
    [ 0.226723] pci 0000:00:12.0: [1002:4380] type 0 class 0x000106
    [ 0.226742] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07]
    [ 0.226752] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03]
    [ 0.226763] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07]
    [ 0.226773] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03]
    [ 0.226784] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f]
    [ 0.226794] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
    [ 0.226836] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
    [ 0.226851] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff]
    [ 0.226919] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
    [ 0.226933] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
    [ 0.227002] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
    [ 0.227016] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff]
    [ 0.227084] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
    [ 0.227099] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff]
    [ 0.227166] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
    [ 0.227181] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff]
    [ 0.227255] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
    [ 0.227275] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff]
    [ 0.227351] pci 0000:00:13.5: supports D1 D2
    [ 0.227352] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
    [ 0.227357] pci 0000:00:13.5: PME# disabled
    [ 0.227379] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
    [ 0.227402] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
    [ 0.227483] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
    [ 0.227497] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
    [ 0.227507] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
    [ 0.227518] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
    [ 0.227528] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
    [ 0.227538] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f]
    [ 0.227577] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
    [ 0.227600] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
    [ 0.227663] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.227667] pci 0000:00:14.2: PME# disabled
    [ 0.227681] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
    [ 0.227759] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
    [ 0.227808] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
    [ 0.227823] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
    [ 0.227835] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
    [ 0.227848] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
    [ 0.227903] pci 0000:01:00.0: [10de:0402] type 0 class 0x000300
    [ 0.227914] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
    [ 0.227926] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.227937] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
    [ 0.227945] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f]
    [ 0.227953] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.233329] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 0.233396] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
    [ 0.233399] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.233404] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.233444] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
    [ 0.233462] pci 0000:02:00.0: reg 10: [mem 0xfdffc000-0xfdffffff 64bit]
    [ 0.233472] pci 0000:02:00.0: reg 18: [io 0xee00-0xeeff]
    [ 0.233505] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.233535] pci 0000:02:00.0: supports D1 D2
    [ 0.233537] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.233541] pci 0000:02:00.0: PME# disabled
    [ 0.239995] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
    [ 0.240062] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
    [ 0.240065] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
    [ 0.240069] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
    [ 0.240134] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
    [ 0.240203] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 0.240207] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
    [ 0.240212] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
    [ 0.240214] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.240217] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.240219] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.240221] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.240224] pci 0000:00:14.4: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
    [ 0.240236] pci_bus 0000:00: on NUMA node 0
    [ 0.240239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.240363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    [ 0.240408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
    [ 0.240440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
    [ 0.240465] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.240531] Unable to assume _OSC PCIe control. Disabling ASPM
    [ 0.251996] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.252665] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.253351] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.254017] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.254684] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.255350] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.257059] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.257725] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.258446] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.258522] vgaarb: loaded
    [ 0.258678] PCI: Using ACPI for IRQ routing
    [ 0.258742] PCI: pci_cache_line_size set to 64 bytes
    [ 0.258749] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xf8000000-0xfbffffff]
    [ 0.258890] reserve RAM buffer: 000000000009f400 - 000000000009ffff
    [ 0.258893] reserve RAM buffer: 000000007fff0000 - 000000007fffffff
    [ 0.259004] NetLabel: Initializing
    [ 0.259067] NetLabel: domain hash size = 128
    [ 0.259131] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.259205] NetLabel: unlabeled traffic allowed by default
    [ 0.259287] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.259608] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
    [ 0.261015] Switching to clocksource hpet
    [ 0.261499] Switched to NOHz mode on CPU #0
    [ 0.261582] Switched to NOHz mode on CPU #1
    [ 0.266362] pnp: PnP ACPI init
    [ 0.266443] ACPI: bus type pnp registered
    [ 0.266593] pnp 00:00: [bus 00-ff]
    [ 0.266598] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.266600] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.266602] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.266604] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.266606] pnp 00:00: [mem 0x000c0000-0x000dffff window]
    [ 0.266609] pnp 00:00: [mem 0x80000000-0xffffffff window]
    [ 0.266662] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.266792] pnp 00:01: [io 0x4100-0x411f]
    [ 0.266794] pnp 00:01: [io 0x0228-0x022f]
    [ 0.266796] pnp 00:01: [io 0x040b]
    [ 0.266798] pnp 00:01: [io 0x04d6]
    [ 0.266799] pnp 00:01: [io 0x0c00-0x0c01]
    [ 0.266801] pnp 00:01: [io 0x0c14]
    [ 0.266803] pnp 00:01: [io 0x0c50-0x0c52]
    [ 0.266805] pnp 00:01: [io 0x0c6c-0x0c6d]
    [ 0.266807] pnp 00:01: [io 0x0c6f]
    [ 0.266808] pnp 00:01: [io 0x0cd0-0x0cd1]
    [ 0.266810] pnp 00:01: [io 0x0cd2-0x0cd3]
    [ 0.266812] pnp 00:01: [io 0x0cd4-0x0cdf]
    [ 0.266814] pnp 00:01: [io 0x4000-0x40fe]
    [ 0.266815] pnp 00:01: [io 0x4210-0x4217]
    [ 0.266817] pnp 00:01: [io 0x0b10-0x0b1f]
    [ 0.266819] pnp 00:01: [mem 0x00000000-0x00000fff window]
    [ 0.266822] pnp 00:01: [mem 0xfee00400-0xfee00fff window]
    [ 0.266828] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.266939] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
    [ 0.267023] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
    [ 0.267131] system 00:01: [io 0x4100-0x411f] has been reserved
    [ 0.267198] system 00:01: [io 0x0228-0x022f] has been reserved
    [ 0.267264] system 00:01: [io 0x040b] has been reserved
    [ 0.267330] system 00:01: [io 0x04d6] has been reserved
    [ 0.267395] system 00:01: [io 0x0c00-0x0c01] has been reserved
    [ 0.267461] system 00:01: [io 0x0c14] has been reserved
    [ 0.267530] system 00:01: [io 0x0c50-0x0c52] has been reserved
    [ 0.267596] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
    [ 0.267662] system 00:01: [io 0x0c6f] has been reserved
    [ 0.267727] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.267793] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.267859] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
    [ 0.267926] system 00:01: [io 0x4000-0x40fe] has been reserved
    [ 0.267992] system 00:01: [io 0x4210-0x4217] has been reserved
    [ 0.268058] system 00:01: [io 0x0b10-0x0b1f] has been reserved
    [ 0.268125] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
    [ 0.268201] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.268290] pnp 00:02: [dma 4]
    [ 0.268291] pnp 00:02: [io 0x0000-0x000f]
    [ 0.268293] pnp 00:02: [io 0x0080-0x0090]
    [ 0.268295] pnp 00:02: [io 0x0094-0x009f]
    [ 0.268297] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.268326] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.268366] pnp 00:03: [irq 0 disabled]
    [ 0.268380] pnp 00:03: [irq 8]
    [ 0.268382] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 0.268408] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.268430] pnp 00:04: [io 0x0070-0x0073]
    [ 0.268456] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.268463] pnp 00:05: [io 0x0061]
    [ 0.268488] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.268495] pnp 00:06: [io 0x00f0-0x00ff]
    [ 0.268504] pnp 00:06: [irq 13]
    [ 0.268535] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.268566] pnp 00:07: [io 0x0010-0x001f]
    [ 0.268567] pnp 00:07: [io 0x0022-0x003f]
    [ 0.268569] pnp 00:07: [io 0x0044-0x005f]
    [ 0.268571] pnp 00:07: [io 0x0062-0x0063]
    [ 0.268573] pnp 00:07: [io 0x0065-0x006f]
    [ 0.268575] pnp 00:07: [io 0x0074-0x007f]
    [ 0.268576] pnp 00:07: [io 0x0091-0x0093]
    [ 0.268578] pnp 00:07: [io 0x00a2-0x00bf]
    [ 0.268580] pnp 00:07: [io 0x00e0-0x00ef]
    [ 0.268582] pnp 00:07: [io 0x04d0-0x04d1]
    [ 0.268632] system 00:07: [io 0x04d0-0x04d1] has been reserved
    [ 0.268699] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.269033] pnp 00:08: [io 0x0060]
    [ 0.269034] pnp 00:08: [io 0x0064]
    [ 0.269043] pnp 00:08: [irq 1]
    [ 0.269080] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.269127] pnp 00:09: [mem 0x000f0000-0x000fffff]
    [ 0.269129] pnp 00:09: [mem 0x00000000-0x001fffff]
    [ 0.269131] pnp 00:09: [mem 0xfed00000-0xfed000ff]
    [ 0.269132] pnp 00:09: [mem 0x7fff0000-0x7fffffff]
    [ 0.269134] pnp 00:09: [mem 0xffff0000-0xffffffff]
    [ 0.269136] pnp 00:09: [mem 0x00000000-0x0009ffff]
    [ 0.269138] pnp 00:09: [mem 0x00100000-0x7ffeffff]
    [ 0.269140] pnp 00:09: [mem 0xfec00000-0xfec00fff]
    [ 0.269142] pnp 00:09: [mem 0xfee00000-0xfee00fff]
    [ 0.269144] pnp 00:09: [mem 0xfff80000-0xfffeffff]
    [ 0.269148] pnp 00:09: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.269229] pnp 00:09: disabling [mem 0x00000000-0x001fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.269309] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.269390] pnp 00:09: disabling [mem 0x00100000-0x7ffeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.269519] system 00:09: [mem 0xfed00000-0xfed000ff] has been reserved
    [ 0.269587] system 00:09: [mem 0x7fff0000-0x7fffffff] could not be reserved
    [ 0.269654] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
    [ 0.269721] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.269788] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
    [ 0.269855] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
    [ 0.269922] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.269930] pnp: PnP ACPI: found 10 devices
    [ 0.269994] ACPI: ACPI bus type pnp unregistered
    [ 0.306168] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
    [ 0.306245] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 0.306311] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
    [ 0.306378] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.306445] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.306523] pci 0000:02:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
    [ 0.306598] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
    [ 0.306664] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
    [ 0.306741] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
    [ 0.306809] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
    [ 0.306886] pci 0000:00:14.4: PCI bridge to [bus 03-03]
    [ 0.306952] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 0.307022] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
    [ 0.307090] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
    [ 0.307175] pci 0000:00:02.0: setting latency timer to 64
    [ 0.307180] pci 0000:00:0a.0: setting latency timer to 64
    [ 0.307188] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.307190] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.307192] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.307194] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.307197] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
    [ 0.307199] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    [ 0.307201] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
    [ 0.307203] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.307206] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
    [ 0.307208] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
    [ 0.307210] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
    [ 0.307213] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
    [ 0.307215] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
    [ 0.307217] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
    [ 0.307219] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
    [ 0.307222] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
    [ 0.307224] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.307226] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.307228] pci_bus 0000:03: resource 8 [mem 0x80000000-0xffffffff]
    [ 0.307274] NET: Registered protocol family 2
    [ 0.307398] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.307694] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.308325] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.308652] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.308719] TCP reno registered
    [ 0.308783] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.308856] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.309050] NET: Registered protocol family 1
    [ 0.426742] pci 0000:01:00.0: Boot video device
    [ 0.426749] PCI: CLS 64 bytes, default 64
    [ 0.426800] Unpacking initramfs...
    [ 0.460291] Freeing initrd memory: 2140k freed
    [ 0.461639] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    [ 0.461707] apm: disabled - APM is not SMP safe.
    [ 0.461884] audit: initializing netlink socket (disabled)
    [ 0.461957] type=2000 audit(1312207987.459:1): initialized
    [ 0.462290] highmem bounce pool size: 64 pages
    [ 0.462357] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.464180] VFS: Disk quotas dquot_6.5.2
    [ 0.464312] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.464469] msgmni has been set to 1712
    [ 0.464730] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.464841] io scheduler noop registered
    [ 0.464907] io scheduler deadline registered
    [ 0.464983] io scheduler cfq registered (default)
    [ 0.465152] pcieport 0000:00:02.0: setting latency timer to 64
    [ 0.465180] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
    [ 0.465225] pcieport 0000:00:0a.0: setting latency timer to 64
    [ 0.465246] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
    [ 0.465393] ERST: Table is not found!
    [ 0.465467] isapnp: Scanning for PnP cards...
    [ 0.822554] isapnp: No Plug & Play device found
    [ 0.822675] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.050031] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 1.050099] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 1.050669] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.050792] mousedev: PS/2 mouse device common for all mice
    [ 1.050892] rtc_cmos 00:04: RTC can wake from S4
    [ 1.074526] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.076767] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [ 1.076869] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 1.076954] cpuidle: using governor ladder
    [ 1.077018] cpuidle: using governor menu
    [ 1.077281] TCP cubic registered
    [ 1.077345] NET: Registered protocol family 17
    [ 1.077415] Registering the dns_resolver key type
    [ 1.077492] Using IPI No-Shortcut mode
    [ 1.077626] PM: Hibernation image not present or could not be loaded.
    [ 1.077633] registered taskstats version 1
    [ 1.077987] rtc_cmos 00:04: setting system clock to 2011-08-01 14:13:08 UTC (1312207988)
    [ 1.078086] Initializing network drop monitor service
    [ 1.078222] Freeing unused kernel memory: 512k freed
    [ 1.078587] Write protecting the kernel text: 3380k
    [ 1.078672] Write protecting the kernel read-only data: 1028k
    [ 1.088713] udevd[47]: starting version 171
    [ 1.180160] SCSI subsystem initialized
    [ 1.197209] usbcore: registered new interface driver usbfs
    [ 1.197412] usbcore: registered new interface driver hub
    [ 1.197625] usbcore: registered new device driver usb
    [ 1.215729] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.215840] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 1.215930] ehci_hcd 0000:00:13.5: EHCI Host Controller
    [ 1.216028] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
    [ 1.226748] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
    [ 1.226842] ehci_hcd 0000:00:13.5: debug port 1
    [ 1.226937] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
    [ 1.237087] libata version 3.00 loaded.
    [ 1.240040] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
    [ 1.240292] hub 1-0:1.0: USB hub found
    [ 1.240359] hub 1-0:1.0: 10 ports detected
    [ 1.240733] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.241613] scsi0 : pata_atiixp
    [ 1.241804] scsi1 : pata_atiixp
    [ 1.242405] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
    [ 1.242472] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
    [ 1.244130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 1.244228] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.244315] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 1.244390] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
    [ 1.250091] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
    [ 1.307508] hub 2-0:1.0: USB hub found
    [ 1.307579] hub 2-0:1.0: 2 ports detected
    [ 1.307730] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.307813] ohci_hcd 0000:00:13.1: OHCI Host Controller
    [ 1.307889] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
    [ 1.326729] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
    [ 1.384201] hub 3-0:1.0: USB hub found
    [ 1.384274] hub 3-0:1.0: 2 ports detected
    [ 1.384428] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 1.384511] ohci_hcd 0000:00:13.2: OHCI Host Controller
    [ 1.384583] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
    [ 1.405209] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
    [ 1.460849] hub 4-0:1.0: USB hub found
    [ 1.460923] hub 4-0:1.0: 2 ports detected
    [ 1.461068] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.461149] ohci_hcd 0000:00:13.3: OHCI Host Controller
    [ 1.461220] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
    [ 1.480027] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
    [ 1.537463] hub 5-0:1.0: USB hub found
    [ 1.537533] hub 5-0:1.0: 2 ports detected
    [ 1.537661] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 1.537735] ohci_hcd 0000:00:13.4: OHCI Host Controller
    [ 1.537805] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
    [ 1.553363] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
    [ 1.610820] hub 6-0:1.0: USB hub found
    [ 1.610890] hub 6-0:1.0: 2 ports detected
    [ 1.611025] ahci 0000:00:12.0: version 3.0
    [ 1.611043] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 1.611127] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
    [ 1.611295] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    [ 1.611377] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
    [ 1.612922] scsi2 : ahci
    [ 1.613831] scsi3 : ahci
    [ 1.614815] scsi4 : ahci
    [ 1.614997] scsi5 : ahci
    [ 1.615170] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
    [ 1.615247] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
    [ 1.615324] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
    [ 1.615400] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
    [ 1.933384] ata6: SATA link down (SStatus 0 SControl 300)
    [ 1.933527] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.063354] usb 6-2: new low speed USB device number 2 using ohci_hcd
    [ 2.106684] ata3: softreset failed (device not ready)
    [ 2.106751] ata3: applying SB600 PMP SRST workaround and retrying
    [ 2.106831] ata4: softreset failed (device not ready)
    [ 2.106897] ata4: applying SB600 PMP SRST workaround and retrying
    [ 2.273373] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.273477] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.275971] ata4.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
    [ 2.276040] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.278897] ata3.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7
    [ 2.278963] ata3.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 2.279030] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.279635] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.279701] ata4.00: configured for UDMA/100
    [ 2.284467] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.284533] ata3.00: configured for UDMA/133
    [ 2.284747] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5
    [ 2.397145] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL00 PQ: 0 ANSI: 5
    [ 2.407639] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
    [ 2.407755] sd 2:0:0:0: [sda] Write Protect is off
    [ 2.407821] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.407838] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.411375] input: Primax Electronics Wireless Mouse as /devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1
    [ 2.411568] generic-usb 0003:0461:4D25.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [Primax Electronics Wireless Mouse] on usb-0000:00:13.4-2/input0
    [ 2.411669] usbcore: registered new interface driver usbhid
    [ 2.411745] usbhid: USB HID core driver
    [ 2.437927] sda: sda1 sda2 sda3 < sda5 >
    [ 2.438378] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 2.518436] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.518516] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.518787] sr 3:0:0:0: Attached scsi CD-ROM sr0
    [ 2.959493] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.003984] udevd[255]: starting version 171
    [ 4.140765] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 4.140858] ACPI: Power Button [PWRB]
    [ 4.140981] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 4.141058] ACPI: Power Button [PWRF]
    [ 4.154881] Linux agpgart interface v0.103
    [ 4.157785] ACPI: Fan [FAN] (on)
    [ 4.158635] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
    [ 4.161972] ACPI: acpi_idle registered with cpuidle
    [ 4.162457] SP5100 TCO timer: mmio address 0xfec000f0 already in use
    [ 4.228336] sky2: driver version 1.28
    [ 4.228452] sky2 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 4.228527] sky2 0000:02:00.0: setting latency timer to 64
    [ 4.228555] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 5
    [ 4.228709] sky2 0000:02:00.0: irq 42 for MSI/MSI-X
    [ 4.228991] sky2 0000:02:00.0: eth0: addr 00:50:8d:ba:48:da
    [ 4.232113] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 4.250935] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
    [ 4.302867] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
    [ 4.356767] ACPI Warning: For \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20110316/nspredef-1059)
    [ 4.356967] ACPI: Expecting a [Reference] package element, found type 0
    [ 4.357033] ACPI: Invalid passive threshold
    [ 4.363965] sd 2:0:0:0: Attached scsi generic sg0 type 0
    [ 4.364111] sr 3:0:0:0: Attached scsi generic sg1 type 5
    [ 4.476288] nvidia: module license 'NVIDIA' taints kernel.
    [ 4.476360] Disabling lock debugging due to kernel taint
    [ 4.556743] thermal LNXTHERM:00: registered as thermal_zone0
    [ 4.556813] ACPI: Thermal Zone [THRM] (44 C)
    [ 4.691172] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 4.775620] hda_codec: ALC888: BIOS auto-probing.
    [ 4.777062] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
    [ 4.781547] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
    [ 5.638691] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 5.638769] nvidia 0000:01:00.0: setting latency timer to 64
    [ 5.638774] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 5.639105] NVRM: loading NVIDIA UNIX x86 Kernel Module 275.21 Mon Jul 18 14:37:03 PDT 2011
    [ 5.886530] EXT4-fs (sda5): re-mounted. Opts: (null)
    [ 5.965890] Adding 996024k swap on /dev/sda2. Priority:-1 extents:1 across:996024k
    Last edited by Fuentes (2011-08-16 22:44:13)

    the contents of /home/user/.xsession-errors
    startkde: Starting up...
    Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
    kbuildsycoca4 running...
    kded(920) LayoutMemoryPersister::restoreFromFile: Failed to open layout memory xml file for reading "/home/alvaro/.kde4/share/apps/kded/session/keyboard/layout_memory.xml" error: 5
    kded(920)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
    No outputs have backlight property
    QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.5'
    kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
    Object::connect: No such signal QDBusAbstractInterface::Changed()
    Invalid D-BUS member name 'idle-hint' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'is-local' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'x11-display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'x11-display' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'remote-host-name' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'session-type' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'unix-user' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    QDBusObjectPath: invalid path ""
    QDBusObjectPath: invalid path ""
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00141
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0x8bf31cc
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00141
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00143
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00143
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00145
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00145
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00147
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00147
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00149
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00149
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e0014b
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e0014b
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e0014d
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e0014d
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e0014f
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e0014f
    Object::connect: No such signal QDBusAbstractInterface::Changed()
    Object::connect: No such signal KWindowSystem::windowChanged(WId,unsigned long*)
    kwin(977): Compositing is not possible
    kwin(977): Compositing is not possible
    kwin(977): Compositing is not possible
    kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
    kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
    kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
    kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
    QProcess: Destroyed while process is still running.
    plasma-desktop(1001): Communication problem with "plasma-desktop" , it probably crashed.
    Error message was: "org.freedesktop.DBus.Error.Disconnected" : " "Connection was disconnected before a reply was received" "
    kdeinit4: Fatal IO error: client killed
    kdeinit4: sending SIGHUP to children.
    klauncher: Exiting on signal 1
    kglobalaccel: Fatal IO error: client killed
    kdeinit4: Fatal IO error: client killed
    kdeinit4: sending SIGHUP to children.
    ksmserver: Fatal IO error: client killed
    kdeinit4: sending SIGTERM to children.
    kdeinit4: Exit.
    kded4: Fatal IO error: client killed
    kdeinit4: sending SIGTERM to children.
    kdeinit4: Exit.

  • Problems with Nvidia GeForce 210 and windows 8.1

    Hi all, I have Windows 8.1 Pro update 1 64bit installed, two weeks ago I started giving problems graphics card NVidia (even has me
    given several blue screen).
    I tried to update the drivers for the card but I got the same problem. It was working properly with generic
    drivers, and if I went to Computer Administrator me a yellow triangle appeared
    on my graphics card and the properties told me the following:
    Windows has stopped this device because it has reported problems.
    (Code 43 )
    My machine is as follows:
    Mainboard : Asus P5K SE
    Chipset: Intel P31/P35
    Processor : Intel Core 2 Quad Q6600 @ 2400MHz
    Physical Memory : 3072MB (3 x 1024 DDR2- SDRAM)
    Video Card : NVIDIA GeForce 8500 GT
    Hard Disk : Seagate ST3320620AS ATA Device (320GB )
    Monitor Type: LG Electronics L1919S
    I just formatted
     the computer from scratch, and
    I still had the same problem with the graphics card,
    so I imagined it would be a hardware problem
    and bought NVIDIA GeForce 210.
    In the end I
    upgraded to Windows 8.1 update 1 with
    the latest drivers for the GeForce 210,
    and after 6 days running everything correctly, a few days ago
    returned to give me problems,
    the screen sometimes freezes and will not
    let me do anything and after a while
    giving me a blue screen and reboots
    me, I suspect that the graphics drivers
    are giving me problems, and I had to
    disable the graphics card and work with
    generic drivers from Microsoft, and even then I
    was restarted once.
    I installed Driver Booster and all the drivers are updated.
    Could
     anyone analyze
    dump files dmp ? Download here 
    I got another dmp:
     C:\Windows\MEMORY.DMP  but it is too heavy.
    Thanks

    yes, I check the dump files
    this cause by graphic card, on which graphic card you reformat your PC and update
    .NET framework maybe cause this driver corrupted
    my suggestion is try using internal graphic card, just for testing
    Just in case you don't believe me, please check this dump file
    * Bugcheck Analysis *
    Use !analyze -v to get detailed debugging information.
    BugCheck 116, {ffffe000d84c4010, fffff800b540be2c, ffffffffc000009a, 4}
    Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for nvlddmkm.sys
    *** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
    Probably caused by : nvlddmkm.sys ( nvlddmkm+9bbe2c )
    Followup: MachineOwner
    1: kd> !analyze -v
    * Bugcheck Analysis *
    VIDEO_TDR_FAILURE (116)
    Attempt to reset the display driver and recover from timeout failed.
    Arguments:
    Arg1: ffffe000d84c4010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
    Arg2: fffff800b540be2c, The pointer into responsible device driver module (e.g. owner tag).
    Arg3: ffffffffc000009a, Optional error code (NTSTATUS) of the last failed operation.
    Arg4: 0000000000000004, Optional internal context dependent data.
    Debugging Details:
    FAULTING_IP:
    nvlddmkm+9bbe2c
    fffff800`b540be2c 803db68aeeff00 cmp byte ptr [nvlddmkm+0x8a48e9 (fffff800`b52f48e9)],0
    DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT
    CUSTOMER_CRASH_COUNT: 1
    BUGCHECK_STR: 0x116
    PROCESS_NAME: System
    CURRENT_IRQL: 0
    ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
    STACK_TEXT:
    ffffd000`8adadbb8 fffff800`b457bfac : 00000000`00000116 ffffe000`d84c4010 fffff800`b540be2c ffffffff`c000009a : nt!KeBugCheckEx
    ffffd000`8adadbc0 fffff800`b457008d : fffff800`b540be2c ffffe000`d760b7f0 ffffe000`d84c4010 00000000`00000001 : dxgkrnl!TdrBugcheckOnTimeout+0xec
    ffffd000`8adadc00 fffff800`b4570582 : ffffe000`d760f540 ffffd000`8adadc60 00000000`00000002 00000000`00000001 : dxgkrnl!ADAPTER_RENDER::Reset+0x1f5
    ffffd000`8adadc30 fffff800`b457b919 : ffffd000`8ada01b0 00000000`00000000 ffffe000`d5ff91a0 ffffe000`d742b000 : dxgkrnl!DXGADAPTER::Reset+0x416
    ffffd000`8adadca0 fffff800`b446cfde : fffff800`b4453c90 ffffe000`d742b000 fffff802`84c1c000 00000000`00000000 : dxgkrnl!TdrResetFromTimeout+0x15
    ffffd000`8adadcd0 fffff800`b4453d1d : ffffe000`d742b000 00000000`00000080 ffffe000`d50b4500 ffffe000`00000000 : dxgmms1!VidSchiRecoverFromTDR+0x1a
    ffffd000`8adadd00 fffff802`84ceb794 : fffff802`84f69a00 ffffe000`d50b4500 ffffd000`8adaddd0 fffff802`84d7337d : dxgmms1!VidSchiWorkerThread+0x8d
    ffffd000`8adadd40 fffff802`84d765c6 : fffff802`84f02180 ffffe000`d50b4500 fffff802`84f69a00 00000000`00000000 : nt!PspSystemThreadStartup+0x58
    ffffd000`8adadda0 00000000`00000000 : ffffd000`8adae000 ffffd000`8ada8000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
    STACK_COMMAND: .bugcheck ; kb
    FOLLOWUP_IP:
    nvlddmkm+9bbe2c
    fffff800`b540be2c 803db68aeeff00 cmp byte ptr [nvlddmkm+0x8a48e9 (fffff800`b52f48e9)],0
    SYMBOL_NAME: nvlddmkm+9bbe2c
    FOLLOWUP_NAME: MachineOwner
    MODULE_NAME: nvlddmkm
    IMAGE_NAME: nvlddmkm.sys
    DEBUG_FLR_IMAGE_TIMESTAMP: 5315b408
    FAILURE_BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys
    BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys
    ANALYSIS_SOURCE: KM
    FAILURE_ID_HASH_STRING: km:0x116_image_nvlddmkm.sys
    FAILURE_ID_HASH: {c89bfe8c-ed39-f658-ef27-f2898997fdbd}
    Followup: MachineOwner
    1: kd> lmvm nvlddmkm
    start end module name
    fffff800`b4a50000 fffff800`b56a8000 nvlddmkm T (no symbols)
    Loaded symbol image file: nvlddmkm.sys
    Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
    Image name: nvlddmkm.sys
    Timestamp: Tue Mar 04 19:07:52 2014 (5315B408)
    CheckSum: 00C20523
    ImageSize: 00C58000
    Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  • Problem with NVidia Quadro FX 4000 on MSI K8T Master2-Far

    Hello everyone, I am new to the forums here.  I cannot figure out what is causing my problem.
    I have been having performance issues with my new Quadro FX 4000 on my system.  I have been in communication with Nvidia tech support for a while now.  Here is the discussion I have been having with them.  It explains my problem in detail.  Be sure to read it from bottom to top though.
    *Update*
    I have a feeling that my PSU might be causing the low performance, seeing that the Quadro requires two power connectors to attach to it: (http://www.pny.com/support/quadro/install/FX4000AdditionalPowerRequirements.pdf)
    Here is my PSU:
    http://www.xpcgear.com/500wseepsubl.html
    I do not know much about PSU's, so any input is greatly appreciated.  Thanks.
    Response (GL)
    Pat,
    I have checked the NVBug Database and although there has been Bugs submitted where a MSI Master2-Far motherboard was used, none of the issues were caused by the motherboard. They just happened to have a MSI Master2-Far motherboard.
    We have seen conflicts when both ATI and NVIDIA drivers are both installed, but I would hope that the Driver Cleaner software removed the lines in the registry as well.
    Did you try the FX4000 in the other system (the one that had the MX 440) ?
    I believe you are taking to right steps in resolving this issue.
    Looking at the Windows Error Reporting, it seems you have had some app problems.
    Looking forward in hearing your results
    Best regards,
    NVIDIA Customer Care.
     Customer (Pat Miller) 02/07/2007 12:19 AM 
    OK I completed my tests and got some interesting results.
    -I installed the GeForce Mx 440 on my computer and it yielded similar poor performance just like the Quadro did (terrible window scrolling, stuttering, horrible gaming).
    -I then installed the Quadro on the computer I yanked the Geforce MX 440 from.  I installed the most recent drivers, and it worked WONDERFULLY.  There was no stuttering, no lagging, and Open GL gaming seemed even better than the MX 440 (I know the Quadro is not designed for gaming, but some Open GL counter-strike served as a nice little test.)  Unfortunately, that computer does not have Adobe Premiere or any high-end applications for me to really test the card with.
    -After those two tests, I uninstalled the MX 440 from my computer and re-installed its ORIGINAL ATI 9600 SE.  It worked just like it did before I first received the Quadro.  No window lagging, no stuttering, and adequate gaming.
    All of these test yield a few conclusions to me:
    1. The Quadro FX 4000 card is not defective, it does indeed work.
    2. My computer seems to dislike Nvidia cards and/or drivers (seeing as the Quadro and GeForce gave me terrible results while the ATI worked fine.)
    It would seem to be a driver issue, almost like my original ATI driver files are still running.  That would explain everything.  However, I completely removed the ATI driver AND ran Driver Cleaner to clear all ATI files from my system before attempting to install the Nvidia card.
    I cannot think of a reason for these inconsistencies. Tomorrow I plan on preparing to completely crash my computer. Backup my files and completely format my HD's and reinstalled Windows XP Pro, my Mobo software, all drivers, ect.
    I will await any ideas or suggestions before I format my computer.  I hope these tests along with my system info helps.  Thank you very much.
     Customer (Pat Miller) 02/06/2007 07:51 PM 
    Ok,
    Here is my system info.  I realize that the Quadro FX 4000 has a conflicting IRQ with my onboard gigabyte ethernet, but my old ATI card was the same way, and it never caused a problem.  Also, I am unsure how to fix that anyways.  Hopefully this info helps us determine the problem.
    I am going to try a few tests of my own.  I am going to install a GeForce MX 440 AGP card(from my other computer) and see how it performs.  Then I will try re-installing my old ATI 9600SE card.  If I get similar low performance, than it must be something else besides the card.  Otherwise, the card is the issue.
    Thanks for the help.
     Response (GL) 02/06/2007 12:15 PM 
    Pat,
    Maybe the system info will shed some light.
    Please perform the following steps:
    1) Click on the Start button
    2) Select Run
    3) In the Open field, type in "msinfo32" and then press the OK button
    4) This will bring up the Microsoft System Information Utility. 
        Click on File and then Save to save this information to your hard drive. You may give it any name you choose.
    5) Once the file has been saved on your hard drive, attach it to this support request so that we may review your system configuration.
    Looking forward for your response.
    Best regards,
    NVIDIA Customer Care.
     Customer (Pat Miller) 02/02/2007 05:19 PM 
    I completely uninstalled my old ATI and Nvidia drivers.  I went into safe mode and ran Driver Cleaner also.  I freshly installed the new Nvidia driver and I still have low performance.
    I am trying to download Viewperf, but it is downloading at about 30k/s, which will take about a day to finish.  What else could be causing this?  It is possible its a bad card? I got it new on Ebay from a legitimate seller, but it came with the card only.
     Response (GL) 02/01/2007 06:00 PM 
    Thank you for contacting NVIDIA Customer Care
    There should not be any performance drop browsing the internet or moving windows across screens.
    Since you did have an ATI card installed, you may want to verify that all files have been removed.
    This also includes the registry since there are applications known to leave files behind.
    Once all ATI files have been removed, please run a benchmark software such as ViewPerf.
    Viewperf 9.03 can be found on the following location:
    http://www.spec.org/gpc/downloadindex.html
    Best regards
    NVIDIA Customer Care
     Customer (Pat Miller) 02/01/2007 01:35 PM 
    I recently upgraded to a Quadro FX 4000.  I do a lot of video editing on Premiere, and from what I read, it seemed like the best card to get.  However, I am getting very poor performance with this card.  For example, just browing the internet and moving windows around yields a very stuttery picture.  And I do not notice any different using Premiere.
    I uninstalled my old video card (ATI 9600 SE) and uninstalled the drivers for it as well.
    I have tried 3 different versions of drivers for the Quadro 4000, including the most recent.
    I have checked the power connections, and the card is receiving power on both the ports.
    I really have no idea what could be causing this bad performance.  Is this how the card works?  Did my ATI 9600SE yield better performance for internet browsing than this card does?  The only thing I can think of is that the card is not getting enough power because it connects to 2 seperate power cables from the PSU which already power lots of other things (HD's, Disk Drives, Fans).
    Any help is greatly appreciated.  Here at my system specs:
    Custom built PC
    MSI Master2-Far Mobo
    2x AMD Opteron 244
    2G Transcend DDR 333 Registered Ram(1 stick)
    2x WD 74G Raptors (RAID 0)
    1x Maxtor 250G
    2x DVD burner
    1x DVD Rom
    Quadro FX 4000 AGP
    *Update*
    I have a feeling that my PSU might be causing the low performance, seeing that the Quadro requires two power connectors to attach to it: (http://www.pny.com/support/quadro/install/FX4000AdditionalPowerRequirements.pdf)
    Here is my PSU:
    http://www.xpcgear.com/500wseepsubl.html
    I do not know much about PSU's, so any input is greatly appreciated.  Thanks.

    Hi there, welcome to forum.
    "*Update*
    I have a feeling that my PSU might be causing the low performance, seeing that the Quadro requires two power connectors to attach to it: (http://www.pny.com/support/quadro/install/FX4000AdditionalPowerRequirements.pdf)
    Here is my PSU:
    http://www.xpcgear.com/500wseepsubl.html
    I do not know much about PSU's, so any input is greatly appreciated.  Thanks."
    your PSU is good one and should be powerfull enough.
    Output    +3.3V@28A, +5V@30A, +12V@34A, [email protected], [email protected], +5VSB@2A
    can't be power related, since at 1st your PSU must be enough, 2nd same issue happend with your old mx 440 VGA. card malfunction are dismissed as possibility as well since its work fine in another machine.
    think its drivers mess. ATI drivers(or part of them) still exist, guess is not completely removed. same symptoms happend many times when switching between Ati to NV, lagging 2D scrolling lag and etc, caused by ATI Smart (part of ATI Drivers) sometimes remain(survive after driver cleaner).
    suggest you a new clean fresh OS installation. like Nv support already directed. also ensure in BIOS, in "Integrated Peripherals", "Init Display First" are configured to AGP.
    let we know how its going, if problem persist we a ready with a tips to resolve your issue.

  • W510 problems with Nvidia driver recovery under Windows 7 (64 bit)?

    Lenovo W510, Nvidia Qudardo FX 880M video, FHD:
    What I'm seeing on occasion is a Windows 7 (64-bit) recovery, screen blanks out, goes 2-3 seconds, then recovers, things go back to normal, but a message displays saying that an error was detected in the video driver, and it has recovered. The new Firefox (4.0.1) seems to be one of the things that may be a contribution, hard to tell.  Per System Update at least, I'm current on the Lenovo downloads. SIW shows the driver level as 8.17.12.5738 (2010-06-27). Nvidia web-site shows their current driver level on the wen-site as 270.61 (2011-04-18), which is a considerably newer date at least. So two questions:
    Has anyone else seen Driver/Recovery issues on Win 7 (64)
    Has anyone directly run the Nvidia video drivers and had them run OK?
    Seems like it would be nice for Lenovo to update their drivers, if indeed this is a driver issue, they appear back-level.

    I used to have this problem with my W510 running Windows 7 Enterprise 64-bit, especially Firefox 4 crashing the Nvidia display driver almost constantly. I googled and found that this is a known problem between older Nvidia driver and Firefox 4. Later on I downloaded the latest version of Nvidia driver from Lenovo website (it was not posted on the System Update server yet but was available on the regular download site). I clean-installed it (i.e., removing all files and settings created by the old driver) and I haven't experienced the problem since then.
    Twitter @thitiv | Work | ThinkPad W520 (4270-CTO) Core i7-2960XM 2.7/3.7 GHz | 16GB Kingston HyperX PnP DDR3-1866
    2 x 256GB Crucial M4 & C300 SSDs | Intel Centrino Ultimate-N 6300 | Ericsson F5521gw WWAN | Ultrabay Blu-ray Burner
    NVIDIA Quadro 2000M | 15.6" FHD 1920x1080 | ThinkPad Battery 55++ (9-cell) & Battery 27++ (9-cell slice)

  • Problem with NVIDIA card

    Hello,
    I'm using a Sony VAIO-VGNFE41Z notebook with the NVIDIA GeForce Go 7600 graphics card. Approximately four days ago the card started to display artifacts on the screen even before the appearance of the VAIO logo during the BIOS initialization process. These artifacts look like green dotted squares, blue randomly placed rectangles and vertical green dotted lines. Since these artifacts appear even before grub takes over the boot process, I really think that this is a hardware issue.
    After the appearance of these artifacts the X server doesn't start up but I still have access to the text console and "nvidia-debugdump -l" displays the following:
    NVIDIA: could not open the device file /dev/nvidia0 (Input/output error).
    Error: nvmlInit(): Driver Not Loaded
    What bothers me however is the fact that I've been using Archlinux on my notebook for approximately one year and before that I used Windows XP for approximately seven years. So my question is whether or not it is possible that the proprietary NVIDIA drivers somehow slowly "destroyed" the graphics card perhaps due to incorrect temperature readings? This is the installation history for these proprietary drivers:
    [2014-05-29 11:03] [PACMAN] Running 'pacman -S nvidia-304xx'
    [2014-05-29 11:03] [PACMAN] installed nvidia-304xx-utils (304.121-2)
    [2014-05-29 11:03] [PACMAN] installed nvidia-304xx-libgl (304.121-2)
    [2014-05-29 11:04] [ALPM-SCRIPTLET] In order to use nvidia module, reboot the system.
    [2014-05-29 11:04] [PACMAN] installed nvidia-304xx (304.121-3)
    [2014-05-29 11:05] [PACMAN] Running 'pacman -S gtk2 opencl-nvidia-304xx'
    [2014-05-29 11:06] [PACMAN] installed opencl-nvidia-304xx (304.121-2)
    [2014-05-29 12:59] [ALPM-SCRIPTLET] >> If you have an NVIDIA card that supports libvdpau or Broadcom Crystal HD chips,
    [2014-05-29 12:59] [ALPM-SCRIPTLET] >> If you run into problems, please contact nVidia or Broadcom along with your system config info / driver version.
    [2014-06-03 14:30] [PACMAN] Running 'pacman -Sc nvidia-utils'
    [2014-06-18 20:19] [PACMAN] upgraded nvidia-304xx (304.121-3 -> 304.121-5)
    [2014-06-29 21:42] [PACMAN] upgraded nvidia-304xx-utils (304.121-2 -> 304.121-3)
    [2014-06-29 21:42] [PACMAN] upgraded nvidia-304xx-libgl (304.121-2 -> 304.121-3)
    [2014-06-29 21:42] [PACMAN] upgraded opencl-nvidia-304xx (304.121-2 -> 304.121-3)
    [2014-07-03 19:43] [PACMAN] upgraded nvidia-304xx (304.121-5 -> 304.121-6)
    [2014-07-13 19:27] [PACMAN] upgraded nvidia-304xx-utils (304.121-3 -> 304.123-1)
    [2014-07-13 19:27] [PACMAN] upgraded nvidia-304xx-libgl (304.121-3 -> 304.123-1)
    [2014-07-13 19:27] [PACMAN] upgraded nvidia-304xx (304.121-6 -> 304.123-1)
    [2014-07-13 19:27] [PACMAN] upgraded opencl-nvidia-304xx (304.121-3 -> 304.123-1)
    [2014-07-29 14:10] [PACMAN] upgraded nvidia-304xx (304.123-1 -> 304.123-2)
    [2014-07-29 21:56] [PACMAN] upgraded nvidia-304xx (304.123-2 -> 304.123-3)
    [2014-07-30 11:35] [PACMAN] upgraded nvidia-304xx (304.123-3 -> 304.123-4)
    [2014-08-13 12:21] [PACMAN] upgraded nvidia-304xx (304.123-4 -> 304.123-5)
    [2014-09-18 19:12] [PACMAN] upgraded nvidia-304xx (304.123-5 -> 304.123-6)
    [2014-10-06 20:18] [PACMAN] upgraded nvidia-304xx (304.123-6 -> 304.123-7)
    [2014-10-23 13:10] [PACMAN] upgraded nvidia-304xx (304.123-7 -> 304.123-9)
    [2014-11-26 20:17] [PACMAN] upgraded nvidia-304xx (304.123-9 -> 304.123-10)
    [2014-12-05 20:41] [PACMAN] upgraded nvidia-304xx-utils (304.123-1 -> 304.125-1)
    [2014-12-05 20:41] [PACMAN] upgraded nvidia-304xx-libgl (304.123-1 -> 304.125-1)
    [2014-12-05 20:41] [PACMAN] upgraded nvidia-304xx (304.123-10 -> 304.125-1)
    [2014-12-05 20:41] [PACMAN] upgraded opencl-nvidia-304xx (304.123-1 -> 304.125-1)
    [2014-12-11 21:30] [PACMAN] upgraded nvidia-304xx (304.125-1 -> 304.125-2)
    [2015-01-15 15:06] [ALPM] upgraded nvidia-304xx (304.125-2 -> 304.125-6)
    [2015-02-06 14:47] [ALPM] upgraded nvidia-304xx (304.125-6 -> 304.125-8)
    [2015-02-08 14:09] [ALPM] upgraded nvidia-304xx (304.125-8 -> 304.125-9)
    [2015-03-19 16:28] [ALPM] upgraded nvidia-304xx (304.125-9 -> 304.125-13)
    [2015-04-07 10:12] [ALPM] upgraded nvidia-304xx (304.125-13 -> 304.125-14)
    Is it possible that the last update on 2015-04-07 somehow messed up the graphics card? Although I find it weird, because the problems didn't appear until 2015-04-10. Nevertheless the temperature readings don't seem to work. Here's the result of nvidia-smi:
    ==============NVSMI LOG==============
    Timestamp : Mon Apr 13 17:34:42 2015
    Driver Version : 304.125
    Attached GPUs : 1
    GPU 0000:01:00.0
    Product Name : GeForce Go 7600
    Display Mode : N/A
    Persistence Mode : N/A
    Driver Model
    Current : N/A
    Pending : N/A
    Serial Number : N/A
    GPU UUID : N/A
    VBIOS Version : 05.73.22.47.04
    Inforom Version
    Image Version : N/A
    OEM Object : N/A
    ECC Object : N/A
    Power Management Object : N/A
    GPU Operation Mode
    Current : N/A
    Pending : N/A
    PCI
    Bus : 0x01
    Device : 0x00
    Domain : 0x0000
    Device Id : 0x039810DE
    Bus Id : 0000:01:00.0
    Sub System Id : 0x81EF104D
    GPU Link Info
    PCIe Generation
    Max : N/A
    Current : N/A
    Link Width
    Max : N/A
    Current : N/A
    Fan Speed : N/A
    Performance State : N/A
    Clocks Throttle Reasons : N/A
    Memory Usage
    Total : 121 MB
    Used : 0 MB
    Free : 121 MB
    Compute Mode : N/A
    Utilization
    Gpu : N/A
    Memory : N/A
    Ecc Mode
    Current : N/A
    Pending : N/A
    ECC Errors
    Volatile
    Single Bit
    Device Memory : N/A
    Register File : N/A
    L1 Cache : N/A
    L2 Cache : N/A
    Texture Memory : N/A
    Total : N/A
    Double Bit
    Device Memory : N/A
    Register File : N/A
    L1 Cache : N/A
    L2 Cache : N/A
    Texture Memory : N/A
    Total : N/A
    Aggregate
    Single Bit
    Device Memory : N/A
    Register File : N/A
    L1 Cache : N/A
    L2 Cache : N/A
    Texture Memory : N/A
    Total : N/A
    Double Bit
    Device Memory : N/A
    Register File : N/A
    L1 Cache : N/A
    L2 Cache : N/A
    Texture Memory : N/A
    Total : N/A
    Temperature
    Gpu : N/A
    Power Readings
    Power Management : N/A
    Power Draw : N/A
    Power Limit : N/A
    Default Power Limit : N/A
    Min Power Limit : N/A
    Max Power Limit : N/A
    Clocks
    Graphics : N/A
    SM : N/A
    Memory : N/A
    Applications Clocks
    Graphics : N/A
    Memory : N/A
    Max Clocks
    Graphics : N/A
    SM : N/A
    Memory : N/A
    Compute Processes : N/A
    The temperature for the GPU isn't shown. However I don't know, whether or not it's supposed to be this way for the GO 7600 graphics card. Here are the details of an lspci call:
    01:00.0 VGA compatible controller: NVIDIA Corporation G73M [GeForce Go 7600] (rev a1) (prog-if 00 [VGA controller])
    Subsystem: Sony Corporation Device 81ef
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at d1000000 (32-bit, non-prefetchable) [size=16M]
    Region 1: Memory at b0000000 (64-bit, prefetchable) [size=256M]
    Region 3: Memory at d0000000 (64-bit, non-prefetchable) [size=16M]
    Region 5: I/O ports at 2000 [size=128]
    Expansion ROM at <unassigned> [disabled]
    Capabilities: [60] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
    Address: 0000000000000000 Data: 0000
    Capabilities: [78] Express (v1) Endpoint, MSI 00
    DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <4us
    ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
    DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
    RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
    MaxPayload 128 bytes, MaxReadReq 512 bytes
    DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
    LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us
    ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
    LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk+
    ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
    LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
    Capabilities: [100 v1] Virtual Channel
    Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
    Arb: Fixed- WRR32- WRR64- WRR128-
    Ctrl: ArbSelect=Fixed
    Status: InProgress-
    VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
    Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
    Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
    Status: NegoPending- InProgress-
    Capabilities: [128 v1] Power Budgeting <?>
    Kernel driver in use: nvidia
    Kernel modules: nouveau, nvidia
    Today the screen suddenly went dark and it became impossible to switch off the laptop. I had to pull (and then insert) the power cable and restart the system. Here's the output of Xorg.0.log.old, journalctl:
    [ 5302.217] (EE) NVIDIA(0): Error recovery failed.
    [ 5302.217] (EE) NVIDIA(0): *** Aborting ***
    [ 5302.217] (EE)
    Fatal server error:
    [ 5302.217] (EE) Failed to recover from error!
    [ 5302.217] (EE)
    [ 5302.217] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 5302.217] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 5302.217] (EE)
    [ 5305.218] (WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0x000009e8, 0x00001288)
    [ 5312.217] (WW) NVIDIA(0): WAIT (1, 6, 0x8000, 0x000009e8, 0x00001288)
    [ 5315.225] (WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0x000009e8, 0x000012bc)
    [ 5322.226] (WW) NVIDIA(0): WAIT (1, 6, 0x8000, 0x000009e8, 0x000012bc)
    [ 5325.226] (WW) NVIDIA(0): WAIT (2, 6, 0x8000, 0x000009e8, 0x000012d8)
    [ 5332.226] (WW) NVIDIA(0): WAIT (1, 6, 0x8000, 0x000009e8, 0x000012d8)
    [ 5335.227] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001304)
    [ 5342.227] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001304)
    [ 5345.228] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001328)
    [ 5352.228] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001328)
    [ 5355.229] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000134c)
    [ 5362.229] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000134c)
    [ 5365.230] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001370)
    [ 5372.230] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001370)
    [ 5375.231] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001394)
    [ 5382.231] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001394)
    [ 5385.232] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000013b8)
    [ 5392.232] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000013b8)
    [ 5395.233] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000013dc)
    [ 5402.233] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000013dc)
    [ 5405.234] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001400)
    [ 5412.234] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001400)
    [ 5415.235] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001424)
    [ 5422.235] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001424)
    [ 5425.236] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001448)
    [ 5432.236] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001448)
    [ 5435.237] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000146c)
    [ 5442.237] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000146c)
    [ 5445.238] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001490)
    [ 5452.238] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001490)
    [ 5455.239] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000014b4)
    [ 5462.239] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000014b4)
    [ 5465.240] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000014d8)
    [ 5472.240] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000014d8)
    [ 5475.241] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000014fc)
    [ 5482.241] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000014fc)
    [ 5485.242] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001520)
    [ 5492.242] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001520)
    [ 5495.243] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001544)
    [ 5502.243] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001544)
    [ 5505.244] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001568)
    [ 5512.244] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001568)
    [ 5515.245] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000158c)
    [ 5522.245] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000158c)
    [ 5525.246] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000015b0)
    [ 5532.246] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000015b0)
    [ 5535.247] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000015d4)
    [ 5542.247] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000015d4)
    [ 5545.248] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000015f8)
    [ 5552.248] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000015f8)
    [ 5555.249] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000161c)
    [ 5562.249] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000161c)
    [ 5565.250] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001640)
    [ 5572.250] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001640)
    [ 5575.251] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001664)
    [ 5582.251] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001664)
    [ 5585.252] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001688)
    [ 5592.252] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001688)
    [ 5595.253] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000016ac)
    [ 5602.253] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000016ac)
    [ 5605.254] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000016d0)
    [ 5612.254] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000016d0)
    [ 5615.255] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000016f4)
    [ 5622.255] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000016f4)
    [ 5625.256] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001718)
    [ 5632.256] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001718)
    [ 5635.257] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000173c)
    [ 5642.257] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000173c)
    [ 5645.258] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001760)
    [ 5652.258] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001760)
    [ 5655.259] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001784)
    [ 5662.259] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001784)
    [ 5665.260] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000017a8)
    [ 5672.260] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000017a8)
    [ 5675.261] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000017cc)
    [ 5682.261] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000017cc)
    [ 5685.262] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000017f0)
    [ 5692.262] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000017f0)
    [ 5695.263] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001814)
    [ 5702.263] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001814)
    [ 5705.264] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001838)
    [ 5712.264] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001838)
    [ 5715.265] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000185c)
    [ 5722.265] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000185c)
    [ 5725.266] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001880)
    [ 5732.266] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001880)
    [ 5735.267] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000018a4)
    [ 5742.267] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000018a4)
    [ 5745.268] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000018c8)
    [ 5752.268] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000018c8)
    [ 5755.269] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000018ec)
    [ 5762.269] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000018ec)
    [ 5765.270] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001910)
    [ 5772.270] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001910)
    [ 5775.271] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001934)
    [ 5782.271] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001934)
    [ 5785.272] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001958)
    [ 5792.272] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001958)
    [ 5795.273] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000197c)
    [ 5802.273] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000197c)
    [ 5805.274] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000019a0)
    [ 5812.274] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000019a0)
    [ 5815.275] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000019c4)
    [ 5822.275] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000019c4)
    [ 5825.276] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000019e8)
    [ 5832.276] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000019e8)
    [ 5835.277] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001a0c)
    [ 5842.277] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001a0c)
    [ 5845.278] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001a30)
    [ 5852.278] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001a30)
    [ 5855.279] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001a54)
    [ 5862.279] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001a54)
    [ 5865.280] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001a78)
    [ 5872.280] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001a78)
    [ 5875.281] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001a9c)
    [ 5882.281] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001a9c)
    [ 5885.282] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001ac0)
    [ 5892.282] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001ac0)
    [ 5895.283] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001ae4)
    [ 5902.283] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001ae4)
    [ 5905.284] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001b08)
    [ 5912.284] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001b08)
    [ 5915.285] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001b2c)
    [ 5922.285] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001b2c)
    [ 5925.286] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001b50)
    [ 5932.286] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001b50)
    [ 5935.287] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001b74)
    [ 5942.287] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001b74)
    [ 5945.288] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001b98)
    [ 5952.288] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001b98)
    [ 5955.289] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001bbc)
    [ 5962.289] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001bbc)
    [ 5965.290] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001be0)
    [ 5972.290] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001be0)
    [ 5975.291] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001c04)
    [ 5982.291] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001c04)
    [ 5985.292] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001c28)
    [ 5992.292] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001c28)
    [ 5995.293] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001c4c)
    [ 6002.293] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001c4c)
    [ 6005.294] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001c70)
    [ 6012.294] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001c70)
    [ 6015.295] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001c94)
    [ 6022.295] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001c94)
    [ 6025.296] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001cb8)
    [ 6032.296] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001cb8)
    [ 6035.297] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001cdc)
    [ 6042.297] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001cdc)
    [ 6045.298] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001d00)
    [ 6052.298] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001d00)
    [ 6055.299] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001d24)
    [ 6062.299] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001d24)
    [ 6065.300] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001d48)
    [ 6072.300] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001d48)
    [ 6075.301] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001d6c)
    [ 6082.301] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001d6c)
    [ 6085.302] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001d90)
    [ 6092.302] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001d90)
    [ 6095.303] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001db4)
    [ 6102.303] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001db4)
    [ 6105.304] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001dd8)
    [ 6112.304] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001dd8)
    [ 6115.305] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001dfc)
    [ 6122.305] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001dfc)
    [ 6125.306] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001e20)
    [ 6132.306] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001e20)
    [ 6135.307] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001e44)
    [ 6142.307] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001e44)
    [ 6145.308] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001e68)
    [ 6152.308] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001e68)
    [ 6155.309] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001e8c)
    [ 6162.309] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001e8c)
    [ 6165.310] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001eb0)
    [ 6172.310] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001eb0)
    [ 6175.311] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001ed4)
    [ 6182.311] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001ed4)
    [ 6185.312] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001ef8)
    [ 6192.312] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001ef8)
    [ 6195.313] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001f1c)
    [ 6202.313] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001f1c)
    [ 6205.314] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001f40)
    [ 6212.314] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001f40)
    [ 6215.315] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001f64)
    [ 6222.315] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001f64)
    [ 6225.316] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001f88)
    [ 6232.316] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001f88)
    [ 6235.317] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001fac)
    [ 6242.317] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001fac)
    [ 6245.318] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001fd0)
    [ 6252.318] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001fd0)
    [ 6255.319] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00001ff4)
    [ 6262.319] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00001ff4)
    [ 6265.320] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002018)
    [ 6272.320] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002018)
    [ 6275.321] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000203c)
    [ 6282.321] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000203c)
    [ 6285.322] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002060)
    [ 6292.322] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002060)
    [ 6295.323] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002084)
    [ 6302.323] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002084)
    [ 6305.324] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000020a8)
    [ 6312.324] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000020a8)
    [ 6315.325] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000020cc)
    [ 6322.325] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000020cc)
    [ 6325.326] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000020f0)
    [ 6332.326] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000020f0)
    [ 6335.327] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002114)
    [ 6342.327] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002114)
    [ 6345.328] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002138)
    [ 6352.328] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002138)
    [ 6355.329] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000215c)
    [ 6362.329] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000215c)
    [ 6365.330] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002180)
    [ 6372.330] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002180)
    [ 6375.331] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000021a4)
    [ 6382.331] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000021a4)
    [ 6385.332] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000021c8)
    [ 6392.332] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000021c8)
    [ 6395.333] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000021ec)
    [ 6402.333] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000021ec)
    [ 6405.334] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002210)
    [ 6412.334] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002210)
    [ 6415.335] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002234)
    [ 6422.335] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002234)
    [ 6425.336] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002258)
    [ 6432.336] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002258)
    [ 6435.337] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000227c)
    [ 6442.337] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000227c)
    [ 6445.338] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000022a0)
    [ 6452.338] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000022a0)
    [ 6455.339] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000022c4)
    [ 6462.339] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000022c4)
    [ 6465.340] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000022e8)
    [ 6472.340] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000022e8)
    [ 6475.341] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000230c)
    [ 6482.341] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000230c)
    [ 6485.342] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002330)
    [ 6492.342] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002330)
    [ 6495.343] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002354)
    [ 6502.343] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002354)
    [ 6505.344] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002378)
    [ 6512.344] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002378)
    [ 6515.345] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000239c)
    [ 6522.345] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000239c)
    [ 6525.346] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000023c0)
    [ 6532.346] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000023c0)
    [ 6535.347] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000023e4)
    [ 6542.347] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000023e4)
    [ 6545.348] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002408)
    [ 6552.348] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002408)
    [ 6555.349] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000242c)
    [ 6562.349] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000242c)
    [ 6565.350] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002450)
    [ 6572.350] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002450)
    [ 6575.351] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002474)
    [ 6582.351] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002474)
    [ 6585.352] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002498)
    [ 6592.352] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002498)
    [ 6595.353] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000024bc)
    [ 6602.353] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000024bc)
    [ 6605.354] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000024e0)
    [ 6612.354] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000024e0)
    [ 6615.355] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002504)
    [ 6622.355] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002504)
    [ 6625.356] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002528)
    [ 6632.356] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002528)
    [ 6635.357] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000254c)
    [ 6642.357] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000254c)
    [ 6645.358] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002570)
    [ 6652.358] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002570)
    [ 6655.359] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002594)
    [ 6662.359] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002594)
    [ 6665.360] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000025b8)
    [ 6672.360] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000025b8)
    [ 6675.361] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000025dc)
    [ 6682.361] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000025dc)
    [ 6685.362] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002600)
    [ 6692.362] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002600)
    [ 6695.363] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002624)
    [ 6702.363] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002624)
    [ 6705.364] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002648)
    [ 6712.364] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002648)
    [ 6715.365] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000266c)
    [ 6722.365] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000266c)
    [ 6725.366] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002690)
    [ 6732.367] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002690)
    [ 6735.367] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000026b4)
    [ 6742.368] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000026b4)
    [ 6745.368] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000026d8)
    [ 6752.369] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000026d8)
    [ 6755.369] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000026fc)
    [ 6762.370] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000026fc)
    [ 6765.370] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002720)
    [ 6772.371] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002720)
    [ 6775.371] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002744)
    [ 6782.372] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002744)
    [ 6785.372] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002768)
    [ 6792.373] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002768)
    [ 6795.373] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000278c)
    [ 6802.374] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000278c)
    [ 6805.374] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000027b0)
    [ 6812.375] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000027b0)
    [ 6815.375] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000027d4)
    [ 6822.376] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000027d4)
    [ 6825.376] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000027f8)
    [ 6832.377] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000027f8)
    [ 6835.377] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000281c)
    [ 6842.377] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000281c)
    [ 6845.378] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002840)
    [ 6852.379] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002840)
    [ 6855.379] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002864)
    [ 6862.380] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002864)
    [ 6865.380] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002888)
    [ 6872.381] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002888)
    [ 6875.381] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000028ac)
    [ 6882.382] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000028ac)
    [ 6885.382] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000028d0)
    [ 6892.383] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000028d0)
    [ 6895.383] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000028f4)
    [ 6902.384] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000028f4)
    [ 6905.384] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002918)
    [ 6912.385] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002918)
    [ 6915.385] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000293c)
    [ 6922.386] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000293c)
    [ 6925.386] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002960)
    [ 6932.387] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002960)
    [ 6935.387] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002984)
    [ 6942.387] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002984)
    [ 6945.388] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000029a8)
    [ 6952.388] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000029a8)
    [ 6955.389] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000029cc)
    [ 6962.389] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000029cc)
    [ 6965.390] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000029f0)
    [ 6972.390] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000029f0)
    [ 6975.391] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002a14)
    [ 6982.391] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002a14)
    [ 6985.392] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002a38)
    [ 6992.392] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002a38)
    [ 6995.393] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002a5c)
    [ 7002.394] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002a5c)
    [ 7005.394] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002a80)
    [ 7012.395] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002a80)
    [ 7015.395] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002aa4)
    [ 7022.395] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002aa4)
    [ 7025.396] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002ac8)
    [ 7032.396] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002ac8)
    [ 7035.397] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002aec)
    [ 7042.397] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002aec)
    [ 7045.398] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002b10)
    [ 7052.398] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002b10)
    [ 7055.399] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002b34)
    [ 7062.399] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002b34)
    [ 7065.400] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002b58)
    [ 7072.400] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002b58)
    [ 7075.401] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002b7c)
    [ 7082.402] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002b7c)
    [ 7085.402] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002ba0)
    [ 7092.402] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002ba0)
    [ 7095.403] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002bc4)
    [ 7102.403] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002bc4)
    [ 7105.404] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002be8)
    [ 7112.404] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002be8)
    [ 7115.405] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002c0c)
    [ 7122.405] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002c0c)
    [ 7125.406] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002c30)
    [ 7132.406] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002c30)
    [ 7135.407] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002c54)
    [ 7142.407] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002c54)
    [ 7145.408] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002c78)
    [ 7152.408] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002c78)
    [ 7155.409] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002c9c)
    [ 7162.409] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002c9c)
    [ 7165.410] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002cc0)
    [ 7172.410] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002cc0)
    [ 7175.411] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002ce4)
    [ 7182.411] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002ce4)
    [ 7185.412] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002d08)
    [ 7192.412] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002d08)
    [ 7195.413] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002d2c)
    [ 7202.413] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002d2c)
    [ 7205.414] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002d50)
    [ 7212.414] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002d50)
    [ 7215.415] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002d74)
    [ 7222.415] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002d74)
    [ 7225.416] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002d98)
    [ 7232.416] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002d98)
    [ 7235.417] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002dbc)
    [ 7242.417] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002dbc)
    [ 7245.418] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002de0)
    [ 7252.418] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002de0)
    [ 7255.419] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002e04)
    [ 7262.419] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002e04)
    [ 7265.420] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002e28)
    [ 7272.420] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002e28)
    [ 7275.421] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002e4c)
    [ 7282.421] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002e4c)
    [ 7285.422] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002e70)
    [ 7292.422] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002e70)
    [ 7295.423] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002e94)
    [ 7302.423] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002e94)
    [ 7305.424] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002eb8)
    [ 7312.424] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002eb8)
    [ 7315.425] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002edc)
    [ 7322.425] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002edc)
    [ 7325.426] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002f00)
    [ 7332.426] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002f00)
    [ 7335.427] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002f24)
    [ 7342.427] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002f24)
    [ 7345.428] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002f48)
    [ 7352.428] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002f48)
    [ 7355.429] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002f6c)
    [ 7362.429] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002f6c)
    [ 7365.430] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002f90)
    [ 7372.430] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002f90)
    [ 7375.431] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002fb4)
    [ 7382.431] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002fb4)
    [ 7385.432] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002fd8)
    [ 7392.432] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002fd8)
    [ 7395.433] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00002ffc)
    [ 7402.433] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00002ffc)
    [ 7405.434] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003020)
    [ 7412.434] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003020)
    [ 7415.435] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003044)
    [ 7422.435] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003044)
    [ 7425.436] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003068)
    [ 7432.436] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003068)
    [ 7435.437] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000308c)
    [ 7442.437] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000308c)
    [ 7445.438] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000030b0)
    [ 7452.438] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000030b0)
    [ 7455.439] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000030d4)
    [ 7462.439] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000030d4)
    [ 7465.440] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000030f8)
    [ 7472.440] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000030f8)
    [ 7475.441] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000311c)
    [ 7482.441] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000311c)
    [ 7485.442] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003140)
    [ 7492.442] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003140)
    [ 7495.443] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003164)
    [ 7502.443] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003164)
    [ 7505.444] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003188)
    [ 7512.444] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003188)
    [ 7515.445] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000031ac)
    [ 7522.445] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000031ac)
    [ 7525.446] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000031d0)
    [ 7532.446] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000031d0)
    [ 7535.447] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000031f4)
    [ 7542.447] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000031f4)
    [ 7545.448] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003218)
    [ 7552.448] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003218)
    [ 7555.449] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000323c)
    [ 7562.449] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000323c)
    [ 7565.450] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003260)
    [ 7572.450] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003260)
    [ 7575.451] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003284)
    [ 7582.451] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003284)
    [ 7585.452] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000032a8)
    [ 7592.452] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000032a8)
    [ 7595.453] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000032cc)
    [ 7602.453] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000032cc)
    [ 7605.454] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000032f0)
    [ 7612.454] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000032f0)
    [ 7615.455] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003314)
    [ 7622.455] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003314)
    [ 7625.456] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003338)
    [ 7632.456] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003338)
    [ 7635.457] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000335c)
    [ 7642.457] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000335c)
    [ 7645.458] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003380)
    [ 7652.458] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003380)
    [ 7655.459] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000033a4)
    [ 7662.459] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000033a4)
    [ 7665.460] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000033c8)
    [ 7672.460] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000033c8)
    [ 7675.461] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000033ec)
    [ 7682.461] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000033ec)
    [ 7685.462] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003410)
    [ 7692.462] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003410)
    [ 7695.463] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003434)
    [ 7702.463] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003434)
    [ 7705.464] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003458)
    [ 7712.464] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003458)
    [ 7715.465] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000347c)
    [ 7722.465] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000347c)
    [ 7725.466] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000034a0)
    [ 7732.466] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000034a0)
    [ 7735.467] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000034c4)
    [ 7742.467] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000034c4)
    [ 7745.468] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000034e8)
    [ 7752.468] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000034e8)
    [ 7755.469] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000350c)
    [ 7762.469] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000350c)
    [ 7765.470] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003530)
    [ 7772.470] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003530)
    [ 7775.471] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003554)
    [ 7782.471] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003554)
    [ 7785.472] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003578)
    [ 7792.472] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003578)
    [ 7795.473] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000359c)
    [ 7802.473] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000359c)
    [ 7805.474] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000035c0)
    [ 7812.474] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000035c0)
    [ 7815.475] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000035e4)
    [ 7822.475] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000035e4)
    [ 7825.476] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003608)
    [ 7832.476] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003608)
    [ 7835.477] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x0000362c)
    [ 7842.477] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x0000362c)
    [ 7845.478] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003650)
    [ 7852.478] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003650)
    [ 7855.479] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003674)
    [ 7862.479] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003674)
    [ 7865.480] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x00003698)
    [ 7872.480] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x00003698)
    [ 7875.481] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000036bc)
    [ 7882.481] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000036bc)
    [ 7885.482] (WW) NVIDIA(0): WAIT (2, 7, 0x8000, 0x000009e8, 0x000036e0)
    [ 7892.482] (WW) NVIDIA(0): WAIT (1, 7, 0x8000, 0x000009e8, 0x000036e0)
    journalctl:
    NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.125 Mon Dec 1 19:58:28 PST 2014
    NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
    NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
    NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
    NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
    NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
    NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
    NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
    NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
    NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
    NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
    NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
    NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
    NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
    NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
    NVRM: Xid (PCI:0000:01:00): 9, Channel 00000020 Instance 00000000 Intr 00100000
    NVRM: Xid (PCI:0000:01:00): 12, COCOD 00000000 e0016100 0000008a 000002fc 00000003
    NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
    NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
    NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
    NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
    NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
    NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
    NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
    NVRM: Xid (PCI:0000:01:00): 9, Channel 00000000 Instance 0001b32d status 0000001d
    So what do you think? Could these problems have been caused by gradual overheating of the graphics card for approximately one year? Or maybe the last driver update somehow messed up the graphics card? I need to know this, because I want to know, whether the problem will repeat itself if I buy another Go 7600 and replace the buggy graphics card with another GO 7600. If it's a "gradual overheating due to a faulty driver"-issue the next card will probably stop working as well after one year. It's interesting to note that nvidia-smi doesn't display the Fan Speed for this graphics card. Does this card have a built-in fan?
    Thanks for your help.

    I've got similar problem with GF540m, since updating to 302.17 I cannot modprobe nvidia:
    ERROR: could not insert 'nvidia': No such device
    dmesg:
    [ 1230.814823] nvidia 0000:01:00.0: power state changed by ACPI to D0
    [ 1230.814827] nvidia 0000:01:00.0: power state changed by ACPI to D0
    [ 1230.814909] NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0df4) installed
    [ 1230.814910] NVRM: in this system is not supported by the 302.17 NVIDIA Linux
    [ 1230.814910] NVRM: graphics driver release. Please see 'Appendix A -
    [ 1230.814911] NVRM: Supported NVIDIA GPU Products' in this release's README,
    [ 1230.814912] NVRM: available on the Linux graphics driver download page at
    [ 1230.814913] NVRM: www.nvidia.com.
    [ 1230.814921] nvidia: probe of 0000:01:00.0 failed with error -1
    [ 1230.814933] NVRM: The NVIDIA probe routine failed for 1 device(s).
    [ 1230.814934] NVRM: None of the NVIDIA graphics adapters were initialized!
    For the record: with 295.x everything (optirun, bbswitch) was ok.

  • External monitor resolution problems with Mountain Lion

    I have a problem with my external monitor (Samsung LS19B150NS) and Mountain Lion (running on unibody Mac Mini). Each time I reboot OSX the resolution get reset from native 1366 x 768 to something lower. The display is connected via DisplayPort-to-VGA adapter. Some observations:
    - I tried selecting "Best for..." option or "Scaled" (set on 1366 x 768 or 1360 x 768). The problem is still there
    - Sometimes resoltuion might stay alright for several reboots, but then the problem re-appears again
    - Sleep mode doesn't reset resolution
    - Other monitors work fine via the same adapter
    - The Samsung LS19B150NS work perfectly well with other Win PCs
    Any suggestions how to fix it?

    I have a problem with my external monitor (Samsung LS19B150NS) and Mountain Lion (running on unibody Mac Mini). Each time I reboot OSX the resolution get reset from native 1366 x 768 to something lower. The display is connected via DisplayPort-to-VGA adapter. Some observations:
    - I tried selecting "Best for..." option or "Scaled" (set on 1366 x 768 or 1360 x 768). The problem is still there
    - Sometimes resoltuion might stay alright for several reboots, but then the problem re-appears again
    - Sleep mode doesn't reset resolution
    - Other monitors work fine via the same adapter
    - The Samsung LS19B150NS work perfectly well with other Win PCs
    Any suggestions how to fix it?

Maybe you are looking for

  • How to transfer images from one iPhoto library to another.

    Hi.  I run my main iPhoto library on an EHD but I also have an iPhoto library on my MBP.  I want to consolidate the two librarys and get rid of all the iamges on the MBP and just have them all on my EHD.  My question is, what is the easiest way to tr

  • IPad not recognized by iTunes, recovery keeps failing.

    I have not yet seen a real suggestion as to troubleshooting steps for this issue on these discussions. The iPad is not recognized by any MB Pro except in recovery mode. I have tried different cables and different ports on different laptops. iPods are

  • Getting an error message when saving my artwork in Illustrator 10. (Some images inside)

    So, I was working on this picture just finely, saving the progress...well, last night, when I went to save what I did before retiring for the night, I got the following error. I don't know what the deal is, it forcs me to rename the darn file, so I e

  • Help on custom Serialization

    Hey all, I'm trying to design a networked whiteboard application and the thought I had was instead of trying to send a vector of the points the user has drawn, I send a BufferedImage with transparent background and the server simply draws each user's

  • Item information of FB60 parked document

    Hi , When a FB60 document is parked the only table updated in BKPF. BSEG doesnot get updated with lineitem information. How I read line item information of parked FB60 document? Thanks, Krishna.