Resolution TV play problem...

Hi, i finally got it to work, and now i got a small problem.
When i play the DVD after being made, the picture seemed to be too big.
I have it on default and 4:3 default also (NTSC).
I making an ANIMATION DVD from .avi file i downloaded, and i can't really read the subtitles on TV vs i would on computer. Is there a difference and can i do anything about it?

Make certain that you have observed the title and action guides in DVD SP.

Similar Messages

In iTunes the iPhone device icon will not show up whenever I plug in a USB into my PC but the iPhone icon will show up in 'This PC' so if anyone who knows a resolution to my problem with my iTunes or PC,it would really help me.I need at least Help or Tip

In iTunes the iPhone device icon will not show up whenever I plug in a USB into my PC but the iPhone icon will show up in 'This PC' so if anyone who knows a resolution to my problem with my iTunes or PC,it would really help me.I need at least Help or some Tips.I have already tried many things to iTunes and my PC like trying to restore my PC but that do anything.Also,would it be fine if i contacted (call) Apple Support? Please,I need help because what I think is wrong is my PC,iPhone,or USB might be messed up so if anyone could help me with this,it would be really helpful and for anyone to be nice enough to help me.

I think this article will help you.

HT201269 I switched from an iPhone to an LG g2, but now all my iMessages keep going to my old iPhone rather than the new one. I know the resolution to the problem is to turn off my iMessage, but I no longer have the iPhone because I sold it to the phone

I switched from an iPhone to an LG g2, but now all my iMessages keep going to my old iPhone rather than the new one. I know the resolution to the problem is to turn off my iMessage, but I no longer have the iPhone because I sold it to the phone carrier. Question is how do I turn my iMessage off through a computer that is not a mac.

http://support.apple.com/kb/TS5185
last paragrapgh of Resolution

Video playing problem

I m experiencing serious video playing problem unable to play avi files of size 150mb above as i have downloaded titanic n was unable to play it!!!!! Pls look in the matter

hi mate, what device are you using, and what have you encoded the bitrate and audio codec of the video?

Discontinuous midi playing problem

Recently I am developing a game on Motorola V980. A sound playing problem has occurred in my working progress. That is when I continuously play two Midis, first one worked fine, but second one was played discontinuously. However, when I played the second MIDI independently, such problem did not occur.
Detail logic of my program were organized like this:
1) Open a binary file and stream it
2) Copy streams into local buffer, such as byte arrays
3) Create Player object for each sound and organize them in an array
4) Invoke Start, Stop, ... methods according to my game logic
5) Finally, a level was completed, stop and destroy Player objects and recycle memory allocated.
I am wondering if it is a bug of sound system of Motorola V980. So I looked for solution in relative Motorola official specifications, media guides and many J2ME developer forums. Unfortunitely nothing I have got. Anyone kindly give me some advices on this issue would be greately appreciated.

Welcome to Apple Discussions!
You will want to restore your iPod...
Restore the iPod
btabz

TS1389 None of these resolutions solved my problem. Now what? It is only one song that it won't play.

None of the resolutions suggested by Apple solved my problem. It is only one song that won't play.

Delete and redownload it if doing so is free in your country.
(81651)

PowerMac G4 533DA & HDTV - video resolution / refresh rate problem

Hope someone can help, I need to access more resolution / refresh rates than I currently get in the Leopard display control:
I have a PowerMac G4 533 Digital Audio running Leopard 10.5.8 (unsupported). It has an upgraded AGP videocard, a ( flashed PC - RV200 chipset) Radeon 7500 w/ 64MB and a DVI output w/ a VGA adapter. I have used this Mac perfectly with my 19" widescreen Samsung SyncMaster 940BW, at a resolution of 1440 x 900 / 60Hz / millions of colors. This monitor is actually for my MacPro, but I used it for the G4 to set it up.
I moved it to my living room to use as a basic HTPC. Since it runs Leopard, it has up to date VLC, Quicktime for video files and a working Superdrive for movies. I don't expect it to play anything more than 480p properly, I think that was the best I got on YouTube. But if I have a DVD ripped to DivX or MP4 it plays them fine on the Samsung monitor.
I connected it to my Viewsonic N3760w 37" 1080 HDTV. It turns on, gray screen w/ Apple and gives me a working desktop. The problem is that I cannot get it to give me the correct resolution and more importantly it seem to have the wrong refresh rate. It is currently set at 1280 x 768 / 60Hz / millions of colors. The screen give me like a small line slowly moving up across screen, higher refresh rates only make it movie faster up the screen.
According to my Viewsonic, these are the resolutions for computer using the VGA plug on the tv:
PC - 1360x768 (preferred) , 1024x768, 1280x768
Mac G3/G4/G5 - up to 1280 x 1024, 1280x720 (preferred)
Please note all of these are lower resolution than my Samsung monitor. My Viewsonic also has on screen adjustment of " phase " and " frequency " as well as the usual color, contrast, etc available. Is there a 3rd party app to manually adjust the resoluion and refresh rate? I have seen Windows programs, does one exist for Mac OS X?
TIA, sorry for the long post

My Viewsonic also connected by VGA, no problem.
I wish I knew more. I checked out the app you did a trial of. I noticed this statement on their web site: Quote
"After rebooting monitor stays blank
For some reason your monitor does not accept the installed frequency. SWITCH IT OFF!"
This is the type of statement that would 'worry me.' -- having the phrase: SWITCH IT OFF! all in caps seems to imply a possibility of damage...which I mentioned in my initial post. (and the site goes on to talk about how you should even then connect another monitor to change the settings you've made that were not accepted).
As I said, though, I wish I knew more for sure about this. It seems that you not only did the obvious of checking System Peferences>Display, but also realize the Viewsonic has buttons that can influence it's screen image, most about position of the image on the screen but at least one item about resolution on mine. (under Setup Mode)
For what it's worth, my Viewsonic is about 6 years old now, still fine, and has eight (8) possible resolutions shown in System Preferences.
Re: Your numbers.
It is currently set at 1280 x 768 / 60Hz / millions of colors.
PC - 1360x768 (preferred) , 1024x768, 1280x768
Mac G3/G4/G5 - up to 1280 x 1024, 1280x720 (preferred)
If you're only talking about a difference of 1280 x 768 and G4 1280 x 1024, perhaps just stretching the picture using the Viewsonic buttons is the way to go.
Or, from the numbers, perhaps the G4 just wants a resolution closest to it's preferred state!?
Anyhow, good luck.

Video Playing problem (Zen Vision M 60

I just got my 60gb zen vision M for christmas and i started transfering files right away to test out its playback quality etc
When i get to video particularly my anime video it plays the first 5 or so seconds and then freezes... no sound and no video.
The video is a naruto video from dattebayo fansubs. I think it is divx encoded (will double check to make sure)
What should i do to solve this issue?
I have not tried any other video's as yet but will do so soon

**bleep** it looks like it's slight differences in the encoding of the files that determin whether or not they play
I used Bleach episode coded by Lunar and that worked fine.
If it is down to minor differences in encoding that's causing this problem, surely it should be fixed as soon as possible, because of the massi've amount of different ways of encoding the player isn't really fit for avi playback if it's this temperamental :/
*UPDATE*
I've looked at the bleach file that works and the Naruto file that doesn't work in GSPOT.
There are a few very minor differences that I don't really understand but the one that jumps out at me is the container:
The naruto files that don't work have the container 'Multipart OpenDML AVI, "rec list" style DivX Style "packed bitstream" AVI (223 frames in first part, 639 frames follow)' and the bleach file that works is 'OpenDML (AVI v2.0) DivX Style "packed bitstream" AVI'
I've bolded what I think the problem is, would those 223 frames (first part) be the 8/9 seconds before it freezes?
Could this be the problem?
*FURTHER UPDATE*
The naruto file that has the line 'First part 223' lasts 9 seconds whereas another file that has the line '(205 frames in first part, 32998 frames follow)' lasts 8.
I'm almost certain this is what the problem is.......any chance of a firmware fix for the avi playback not supporting multipart AVI files?
Message Edited by antonusklesk on 2-25-20060:40 PM
Message Edited by antonusklesk on 2-25-20060:4 PM
Message Edited by antonusklesk on 2-25-20060:44 PM

IPod Touch 4G Music Playing Problem

I have an iPod touch 4g and whenever I click on a song it either doesn't play or it skips to another song and plays that song. When I click the shuffle button for all songs it will go to a song and play that actual song or not play at all. I cannot play playlists or songs I have speciffically chosen I have tried restarting and shutting down but it still does the same thing. I had recently transferred purchases to itunes on another computer if that helps. Please leave suggestions on how to stop this!

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync and resync all music
- Restore from backup
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

Does Screen Resolution Cause Display Problems?

I just picked up my new 15 inch Retina Macbook Pro with 750m and I changed the screen resolution to the second option,the one with the bigger text but i am noticing that when i close a window, a white horizontal line comes up around where the window was. Is this a screen problem or software related problems? Thank you.

I agree with Mende1. It sounds like it might be ghosting.
I have a competely different tip for you: a better way of increasing the size of the text is to use screen zoom. Check here for more info: https://www.apple.com/accessibility/osx/#vision

DVDSP3 - First play problem

Hi
I producing a project on DVD SP3. I've done this before but I'm having problems with this particular project. It is a simple project with 1 menu page and a start button. From there you can navigate thru chapters. I have "first play" set to Menu 1 and everything works fine on the simulator but when I burn a disk and try to play the DVD on a player, Menu 1 does not appear on the startup. If I hit "enter" on the DVD player's remote the "Start DVD" button visibly blinks as activated and the DVD video plays and navigates thru the chapters fine.
So.....Everything works but Menu 1 is not visible on startup.
I'm starting to pull my hair out....LOL
Something weird I've noticed is that when I burn the large project it the prompt says it is "compiling". When I burn this small project the prompt says it is muxing.
I just finished a project with 10 menus and 77 buttons. It works like a charm. Am I just overlooking some obscure mistake or is there something obvious mistake I've committed?
Toby Threadgill

Hello,
Thanks for your ideas. I have tried both your suggestions unfortunately to no avail. When I use the simulator, everything works like a champ. When I emulate using the DVD player or burn an actual DVD the menu does not show up and the screen is black. If I hit the enter on the player, the button visibly blinks on the black screen and the video track starts playing and navigates fine.
Toby Threadgill

DVD Playing Problems

Lately, I've been having problems occasionally playing dvds on my Powerbook G4 laptop. Usually I put in a dvd and eventually the DVD Player opens up and the movie loads up. But lately i put in a dvd and nothing opens up. If I open DVD Player myself a message says "Disc Not Available or Supportable." But yet the same dvd has worked in the past. What can I do to get this dvd to play if this happens?
thanks in advance!
-chris.

Might try one of those cleaning Disks, it's been the savior for a few, and a waste of money for others.
Also Using Disk Utility to Verify the HD & Repair Permissions, then reboot may help.
Or, mysel, I'd use Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.

DVD files playing problem

hi... i have a K8T Neo@ F/FIR board wid 1.8 3000+ series amd processor. 512 RAM and Radeon 7200 Graphic card
now the problem that i am facing is that when even i m watchin a dvd movie on my computer, after i m done wid da movie and i cross the software to close it, my system halts after 3 seconds.
not only a dvd but even if i have a dvd .vob file in my hard drive and i play it from there, and when i close the software, the system halts. i have changed my 3d card but the problem is still ther. have used many dvd playing softwares, like VLC, power dvd, windvd and intervideo. but all have the same problem.
the system halts some 3-5 seconds after i exit the software or stop the movie playing.
please give me some solution...
waiting..
thanx

>>Posting Guide<<

Simple play(); problem

Go easy on me. I'm very new to ActionScript.
My problem is this. I've got a button inside a movie clip.
That button needs to play a movie clip that is on the main
timeline. However, whatever I try (that's within my knowledge)
doesn't work.
Here is a list of AS that I've got in my file.
Main timeline/first frame stop();
Movie clip end of animation has:
this.stop();
play_btn.addEventListener(MouseEvent.CLICK, slideOver);
function slideOver(event:MouseEvent):void {
timeline.play();
Movie clip that needs to be controlled:
first frame has this.stop();
last frame has:
this.stop();
and code to include a text file (which is working just fine).
Any ideas?

Well I'm not really sure why it doesn't work, but if you take
away this code from the first movie clip (the one with the button
in it):
play_btn.addEventListener(MouseEvent.CLICK, slideOver);
function slideOver(event:MouseEvent):void {
timeline.play();
and add this to the main timeline like this:
stop();
my_mc.play_btn.addEventListener(MouseEvent.CLICK, slideOver);
function slideOver(event:MouseEvent):void {
secondMovieClip.play();
than it should work.

Mpeg dvd playing problem

I have just had some camcorder video tranferred to dvd by a professional company. When I try to play the dvd's my iMac doesn't recognise the dvd even exists. The presence of the dvd does.'t show up in Finder so I can't drag it in to such a program as VLC, which has been suggested. I am now informed that the dvd'd are in mpeg form and need some plug-in to allow me to play them. Any advice on how to overcome this problem would be much appreciated.
Many thanks

'All type of MPEG File.'
Hardly a proper desciption!
Contact the company and ascertain exactly what they have made.

Resolution TV play problem...

Similar Messages

Maybe you are looking for