Resolution will not stay put, changes at turn on after selecting "apply and ok"

When I set the resolution on display settings to the max on the slider scale, then select apply and ok and select to keep this setting, every thing works as it should until I shut down and restart the laptop.Upon restart or startup, the resolution goes back to a lower resolution and all is distorted, then I have to go back into control panel, personalizing, display settings and reset the resolution to max. This happens almost 100% of the time but not always. Very annoying behavior..
Any help would be appreciated to keep the resolution set and stop this tiring/annoying routine
System is Vista..
Chuck

Try placing the iPhone into recovery mode.
If this is successful, this will require restoring the iPhone with iTunes. Do so as a new iPhone or not from the iPhone's backup.
http://support.apple.com/kb/HT1808?viewlocale=en_US

Similar Messages

Apple store installed optical drive replacement. It plays CD and DVD but will not let me change a DVD to .mp4 without stalling and or going very very slow. Can I fix the HL-DT-STDVDRW GA11NR?

Apple store installed optical drive replacement. It plays CD and DVD but will not let me change a DVD to .mp4 without stalling and or going very very slow. Can I fix the HL-DT-STDVDRW GA11NR? The Apple store is a two hundred mile one way trip.

I didn't imply anything; I simply explained the terms of the ToU here because you had not specified what you were trying to do. Most such related questions are about copying protected content and I would not appreciate having my post removed with the obligatory email from Apple because I violated the ToU. In any case, you can find dozens of threads googling (or here) about the newer burners being slow copying content if it is protected. FWIW, if the DVD was produced by a commercial outfit, they may have used some sort of protection or an unusual file format - that problem has been discussed here previously.
As for your slow burner - since we don't even know what type of Mac/model/year/OS you have, it is impossible to guess. If it's an iMac, those vertically installed burners are known to be less than perfect; the horizontally installed versions are better, but still not as good as an external. I've used an external burner for years.
As for the conversion time: the burner should have nothing to do with that; it is your software and your Mac's processor and amount of RAM that matter for conversions and rendering. I have no idea what you are using to burn the DVD. And, as a last consideration: you should always burn your content at a slow speed so you can avoid burn errors and have better results.
Good luck.

Sound Input will not stay put!

Hi, if i go to
System Preferences>Sound>
and change the input level to my desired choice for my built in mic on my imac g5 isight, well, the level will not stay the same.
I constantly use Ichat, and use the audio chat feature with a few friends.
And it bugs me cause I have to go to change my preferences every single time.
Is there a cure for this.
I would trash the sound prefereces p.list , but im not sure which one it is.
Anyone , can you shed some light on , a
small issue, but important to me.
thanks

I will need to select character by character with Hanin, while with Zhuyin, the system will render suggestions.
This page has some info on Hanin that may be helpful in doing more characters at once:
http://www.yale.edu/chinesemac/pages/tcim_x4.html#Hanin
As for the problem with the Zhuyin IM, I think it would be best to ask on the chinese-mac list and see if anyone there has run into this and found a fix:
http://groups.google.com/group/chinesemac/

POP account will not stay online. Goes offline even after I "take account

My POP account will not stay online, even when I "take" the account "online" via the mailbox drop-down in the menu bar. I don't think the ISP or the internet connection is the problem as I have three other mailboxes with the same ISP and they all work fine.
Why might the POP account be failing to hold its online status and what can O do about it.
Thanks for your help with my problem.

Hi, and a warm welcome to the Forums!
First I'd backup your whole Mail folder.
Try dragging this file to the Desktop first, then logout/in...
/Users/YourUserName/Library/Preferences/com.apple.mail.plist
Can drag back if it doesn't help.
If that doesn't work try the .plists in...
/Users/YourUserName/Library/Mail/
In your home folder, try trashing this folder after quitting Mail...
/Library/Caches/Mail
http://www.hawkwings.net/2006/02/08/rebuild-your-database-and-speed-up-mailapp/
Move Envelope Index to the Desktop in...
/Library/Mail

My print resolution will not stay at 1200 dpi - HP Envy 4500

When I go into my advanced settings, I change my printer dpi to 1200x1200, however, it always defaults back to 600x600. I have changed the paper type to hp premium paper, but it still defaults back.
I am trying to print coupons from this printer, and when I do, the bar code is blurry, and my coupons will not scan. I cannot get them to print at 1200 dpi....
Thank you!

Hello momfor2,
It appears that when trying to print your coupons, the printer won't stay with the max dpi setting. I will try to assist you with this.
I looked into this, with a printer in one of the labs and was able to find two places within the printer software where the quality of the output can be changed.
First go to the printer assistant (icon on the printer on your desktop)> click on preferences> click on the quality tab> this will allow you to pick tray, paper type, and output you may set this to "best". click apply. Exit the application and test a print. The program software may still overwrite the setting we just setup.
The other place is in the same location as above on the Quality tab, you will also see and "advanced" button, click on it to open another window> there should be an option for "print with max dpi" change this to "yes", click apply. Close the application and test.
This will set the printer to be printing with its max dpi setting, however as mentioned about the programs can still overwrite that. If it does, you may have to look up how to save the setting in the specific program that your printing from.
Let me know how you make out with that. Thank you for posting on the HP Forums.
I worked on behalf of HP.

Palm Desktop entry will not stay put

Recent change, not sure why. Every entry or edit in the Palm Desktop Calendar drops into the previous day (ie: entry into Friday whe completed fall into thursday). I must drag it on to the day after the entry I want for it to stay where it belongs. I have used the Desktop for 3-4 years and never saw this before. Any suggestions?
Post relates to: Palm Z22

Hello!
Please make sure your PC does have the daylight savings update installed on your PC, ususally windows updates or macintosh updates takes care of this. Also for your device, please go to www.palm.com/dstpalm to see if you need the DST updater for your PDA. Seems like the symptoms your describing is fitting the bill.
Post relates to: Treo 650 (Unlocked GSM)
Post relates to: Treo 650 (Unlocked GSM)

Screen Resolution Will Not Stay Set...

Hi Gang:
I am trying to get my Mac to display 640 by 480 60Hz resolution so that I can input it into my television. I change the settings in the System Preferences /Display to what I want, yet every time I reboot it changes back to a different setting. I have been setting it up on a computer display monitor, is accepts the new resolution, then reverts back as soon as the computer is restarted. I have tried changing the resolution and starting it on the television upon a fresh re-start thinking it may sense the computer monitor, but still goes back to the higher rez setting. Is there a way to force the setting on the computer? very frustrating.
Thank you, Glenn

Hi.
The screen resolution and refresh rate are stored in the PRAM. If it's an Intel Mac you're dealing with, reset the PRAM by holding the CommandOption+PR keys at startup, until you hear the second chime). If you have a PowerPC Mac, then you'd better reset the NVRAM, by booting into Open Firmware (hold CommandOption+OF at startup), and type at the Open Firmware prompt:
reset-nvram (hit Return)
set-defaults (hit Return)
reset-all (hit Return)
The machine will restart. Set the resolution you want, and see if that persists after restarts now.
Good Luck.

Elements 12 organizer will not stay up, it crashes very quickly after boot, editor works fine. After

What do I do for photoshop elements 12 crashing immediately after booting up. Editor works fine.

Please try creating new tag in a new catalog.. Is Organizer still crashing?
You also mentioned crash on restoring an old catalog backup? Is this the same catalog with which you are seeing crash on tag creation?
Thanks
Andaleeb

Creatve IR remote will not stay enabled (RM1500) SB audig

The RM500?remote control will not stay enabled in ENT. settings. After rebooting PC I have go to settings and enable it. Does anyone have any Ideas? Thanks.SBaudigy 4

@ Ok, 2.5 years later but here's the solution: in C:\Program Files (x86)\Creative\Shared Files\Module Loader\RC System there's a file called RCSystem.CFG
You can set default options here. You need to set:
RunAtStartUp=
SupportWinApp=
And there you go, it's enabled by default!

Will not stay connected to my home wi-fi

My iPhone will not stay connected to my Airport Express. My iMac and PB have no problem. Where I live I do not get any other wi-fi signals.
In the morning my phone connects...I check my mail and check a few web sites. No problem for about 5 minutes or so then I loose the connection and it switches to AT&T's Edge service. The phone will re-connect when I go to setting>wi-fi But it only stays connected for 30 seconds or so. It will say "unable to connect" and I do renew the lease.
This has been happening for about 3 weeks now.

Have you tried deleting the saved wireless network settings for this network from your iPhone followed by reconnecting to the network?
If not, on your iPhone go to Settings > Wi-Fi.
Select the right facing arrow in a blue circle icon to the right of the name of the network.
At the top, select Forget this Network.
This will delete the network and network settings from your iPhone.
Follow this by selecting and reconnecting to the network.

My iMac 10.6.8 will not stay asleep. It keeps coming back on seconds or minutes after I put it to sleep.

My iMac will not stay asleep. A few seconds to a few minutes after I put it to sleep, it comes back on.

OK, a few more things coming to mind:
Set the energy saver to sleep in 1 min
Diconnect every single peripheral you have connected to your iMac
Eject any DVD/CD you may have in the drive
Turn off all applications you have running
iTunes or DVD Player could be waking it constantly up if accessing your drives
Messaging apps could be looking for internet connection
Disable Wi-Fi
Disable Bluetooth - you don't have cells paired to it, do you?
Disconect Ethernet cable (if connected)
Spotlight - is it indexing your drive? (a dot within a magnifying glass would be pulsating and won't let your Mac go to sleep)
Connect a wired mouse - if you have it - and go to Apple menu then click SLEEP
If it remains asleep, keep adding all apps, devices and services back until you find which one is causing it.
If nothing helps, then I'm out of ideas....
In case you have Apple TV - the remote can indeed make it wake up.

My iPhone 4s will not sync a changed playlist from itunes unless i turn off music match. Shouldn't I be able to use a playlist and music match at the same time?

my iPhone 4s will not sync a changed playlist from itunes unless i turn off music match. Shouldn't I be able to use a playlist and music match at the same time?

It's not entirely impossible actually as someone has pointed out to me that I can turn on Call Forwarding and that stops any incoming calls. I've just forwarded it to my google voice number and then turned on "do not disturb" in google voice and whenever I get a call it goes straight to my google voice voicemail and my phone does nothing. The only thing now is I still get text messages but I think the phone calls bugged me more because they would make my music turn off for much longer.
Even though this isn't a perfect solution it's something so far so maybe you shouldn't just come out and say there's NOTHING I can do because so far I've found part of a solution. If you don't have anyting productive to say then just don't reply and close the tab. Thanks.
At this point I'm wondering if anyone knows of any Jailbreak tweaks that can enable what I want. Unless of course it's agaisnt the rules of this forum to mention jailbreak stuff...

Bugs? playback resolution will not change?

The playback resolution will not change no matter what I choose ? it may be contributing to the distorted playback issues im having ? also when I select a clip from the project or media browser the sequence automatically starts in arri editing mode? I switch to dslr but the playback gets worse.
win 7
64
gtx780

When you refer to playback resolution, do you mean the setting highlighted in this screenshot?
If so, what happens when you try to change the setting? And, of course, if that's not what you were referring to, please elaborate.
And when you say "when I select a clip from the project or media browser the sequence automatically starts in arri editing mode," are you referring to creating a sequence from the clip? If so, the editing mode generally doesn't matter much unless you plan to use "smart encoding" or to enable "Match Sequence Settings" or "Use Preview Files" when you export, neither of which is recommended in most cases. The main properties of the sequence settings that you want to make sure are right are the height, width, pixel aspect ratio, and frame rate.
As to the distorted playback issues, a screenshot might help to start troubleshooting that.
Finally, please specify exactly which version of Premiere you have--the three-part number like 2014.0.1, not simply CC or CS6.

Why don't my apps automaticaly update? i keep trying to turn it on under settings but it will not stay on

why don't my apps automaticaly update? i keep trying to turn it on under settings but it will not stay on

Sounds like we have a similar problem. Four days ago I was playing music through a wireless Bose speaker via bluetooth and everything was fine. Then I was texting while listening and got 2 texts about the same time as I was typing one and my phone went black. I pushed the home button and it worked, went into my texts and all were there. However ever since then the time isn't right, so it can't keep time no matter what I do. The bluetooth works only at times, the wifi keeps jumping on and off, sometimes my data won't work and the other day I couldn't even turn it off, so had to wait until it died. The battery life display at that moment wasn't correct either. Took to Verizon, they couldn't help. Suggested a factory reset, which I did last night and still the same issues! One day I couldn't even text my husband on his iPhone. Just wouldn't work at all. Did everything suggest and still not good. Seems like after stalking these pages today a lot of people are having this problem in Dec/Jan and of course also I'm 3 weeks out of my 1 year warranty and so were many others, by days. Very strange, and all on the 5C. What did you do? Is it working now?

My LG Spectrum will not stay on, keeps shutting off and turning back on with no signal and shuts off again

My LG Spectrum will not stay on, keeps shutting off and turning back on with no signal and shuts off again

Thanks for keeping us posted lizy7796. May I ask did the replacement device resolved the powering concern? Also, how much available device memory do you have after you restored your info onto the new device? If you have any additional questions then as always we're here to help.
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport

Resolution will not stay put, changes at turn on after selecting "apply and ok"

Similar Messages

Maybe you are looking for