Resolve audio echo in 4s handset, not Bluetooth or headset?

Has anyone figured out how to fix the audio echo in the 4s handset? This is my second unit.

Did you find a solution to this problem? have exactly the same issue!

Similar Messages

HT1766 I had a new handset delivered today due to my old one being damaged. As I went to restore from iCloud backup it is telling me I can't due to the handset not having iOS 7.1. How can resolve this issue?

I had a new handset delivered today due to my old one being damaged. As I went to restore from iCloud backup it is telling me I can't due to the handset not having iOS 7.1. How can I resolve this issue?
Could I select 'Set up as New IPhone' and then update to iOS 7.1 and then proceed to restore the phone from my most recent iCloud backup ?
Any help with this issue is greatly appreciated.

Hi again razmee209!
It has been updating since your last message and it says there's another 6 hours to go, does this sound right or is there a possibility I've been sent a re-con and the update will slow down my new handset considerably?!

HT3563 How do I change a bluetooth profile on my macbook pro from headset to headphone (a2dp) audio only so it will not conflict in my multipoint stereo headset shared with my iphone.

I have a LG HBS-700 bluetooth stereo headset and "in order to access Multi-Connection mode, at least one of the two devices you are trying to connect to the HBS-700 must be able to select a profile, OR one of the two devices must only support one profile (Either Headset/Hands-Free or A2DP/AVRCP). For example: Two handsets which support both the Headset/Hands-Free and A2DP/AVRCP profiles cannot be connected to the HBS-700 simultaneously. But, one handset supporting Headset/Hands-Free/A2DP/AVRCP and a Bluetooth Stereo Dongle supporting only A2DP/AVRCP is OK".

Backup your computer. You may have to replace the HD.
Try repairing disk.
Repair Disk
Steps 1 through 7
http://support.apple.com/kb/PH5836

IPhone 4 bluetooth iPod or app audio connection to car sterio not working

My iPhone 4 handsfree connection works fine with my car sterio as well as the usb connection for iPod audio. However, I can't get the bluetooth audio to work for the iPod music nor Navigation app.with car sterio. Should I be able to connect my iPhone 4 iPod audio to my car sterio via bluetooth? How?

This fuction worked great on the iphone 3gs with iOS 3.x.... after iOS4 came out it doesn't auto connect anymore in my truck (pioneer unit). I can force them to pair via A2DP but it would be nice if Apple brought back the auto connect that worked last year.

Video audio echo iPad

Hi,
I've just purchased a second hand Ipad2. Everything seems fine but I've noticed occasionally if I pause a film whilst using the Video app, I get an audio echo when the film is restarted. This can be resolved by repausing and shifting the film along its time line but its a bit annoying !
Any ideas ?

That's weird.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
By the way, are you confident that the iPad has not been jailbroke?

Why can my bb bold not find my new Bluetooth handsfree headset

Hi I have had my blackberry bold for a month now but after shutting my headphones in my car door I have just been out and brought a Bluetooth wireless headset v2.0 and when I search for it on my bb all that keeps coming up after it has searched is no new device found, could someone please help, I'm not good with phones. Many thanks.
ldf maeer

Hello sig,
I don't think, that you completely understood my question. The problem in your question, is that there is something wrong with the sound output/input, but my problem is, that my headphones will not pair or even be discovered by my computer.
However, during the time, that it took to get the first answer on here, I found it out myself.
While pairing, your headset must be in a so called "pairing mode" you can get it by switching your headset off, then holding the power button until the LED starts blinking red and blue. Then your mac should discover it without a problem.
The audio quality is quite bad on this headset, so I will only be using it for skype. It's really weird to listen to music on these.
All the best,
rein205

Audio track 1 and 2 not lined up??? help!!

When you put clip in timeline they go on 2 audio tracks for some reason. well, i must have deleted something I shouldn't have because 1/4 way through movie the 2 audio tracks are not directly lined up with one another. for some reason the bottom track says +15. I tried to undo but you are openly allowed 10-15 or so 'undo's" and I must have made error long time ago and not noticed. Then I tried to lock the audio track 1 for my video clip and move the audio track 2 directly underneath it but it won't let me. Even when audio track 2 is unlocked I cannot move audio track 1 for same movie clip.
When I play my movie the dialogue is not synced anymore. Can I fix this?
suggestions?

Birmy wrote:
I have been told by a friend to re-do my entire movie from the point the audio track 1 and audio track 2 have become displaced. If anyone in the Apple community can help me I would appreciate it.
I find it hard to believe that when audio track 1 and audio track 2 become displaced there is not an easy way to line them up again. Since 80% of my movie has an audio track 2 clip that has a red icon with + 15 on it it seems to suggest that audio track 2 is 15 frames off of audio track 1. (Audio track 1 and Audio track 2 are from the same video clip)
So I have about 20% of my movie clips that have lined up Audio track 1 and Audio track 2 and then all of a sudden the audio track 1 and audio track 2 are not lined up. So I hear an echo to every actor who states dialogue because audio track 1 "says the line" and then of course audio track 2 which is not lined up "says the line" a few seconds later.
If anyone can answer this question you will save me about 10-15 hours of work. Thank you!
Your friend is, umm, to be kind, ignorant.
There is an easy way. Right click on the red icon and select slip into sync.
The most likely explanation is that you have deactivated the link function of the timeline. It is a small chain link icon in the right upper corner of the timeline button bar.
Since you are having so many problems associated with yoru project's audio, I strongly urge you to learn how to increment your project on a daily basis so you have an intact version history (no, I'm not going to explain that to you) and be absoltuey CERTAIN you understand how the auotsave vault works and how to recover your project if you need to.
bogiesan

Audio echo during capture CS3

During capture I get this terrible audio echo. If I go into the Windows mixer panel and set a slider called Premiere down to zero that will stop it. But if I then wish to hear the audio (from Premiere) after the capture I have to turn it up again. Sureley this is not the correct way to do it.
It seems as though the input audio is being monitored and the delayed Premiere output at the same time. This will only happen when the capture screen is open.
Anyone any idea how to stop this without constantly playing with the mixer?
Very annoying.

Problem is only while the capture screen is being used. The delay is very pronounced.
So, your Captured footage does not exhibit this echo. Is that correct? Obviously, you have a latency issue. What are your Audio playback settings? I would also wonder about the Matrox card, as these have caused all sorts of Audio issues, though I do not recall any with Capture.
If the first statement is true, then your footage is clean and good, and all you have to do is adjust the necessary settings during Capture.
Good luck,
Hunt

Bluetooth n95 not working with headset

i have recently bought the motorola s9 bluetooth stereo headset. there are a couple of problems. it works fine to connect for the first time using the code on the phone. then if i turn the headset off and on it connects and immediatly disconnects. this is a problem but not a major one.
the biggest problem is the music cuts out all the time for a couple of seconds. i have tried placing the phone right next to the headset and it stil happens. i have read the other n95 forums and see this is very common with the new firmware (i had already installed new firmware so i dont know if this happened on the old firmware).
does anyone else have this problem with another headset or can anyone give me a solution. how often does firmware come out. and is it possible to delete the new firmware.

Same problem here, unfortunately - iPhone 3G & 3.0 do not work with both the SHB6100 and SHB7100 by Philips.
Philips SHB6100 + iPhone 3G 3.0: A2DP *does not work*
Philips SHB6100 + Nokia and SE phones: A2DP works
Philips SHB6100 + MacBook Leopard: A2DP works
Sony DR-BT30Q + iPhone 3G 3.0: A2DP works
Complaining here, however, is not really going to help as these are user to user forums and there is nothing users can do to fix this. Please report this issue at the Apple iPhone Feedback page @ http://www.apple.com/feedback/iphone.html

"Audio File "Recording#27.aif" not found" Error Message- Please HELP!

Hi Everyone-
I was opening a podcast today to finish editing it and I got this error message, "Audio File "Recording#27.aif" Not Found" - and, naturally, when I opened the project, half of a phone interview was missing (or, rather, it shows up as purple balloons but each one says "File Not Found" inside). This file is the audio from the interviewer (the interviewee file is totally fine, as are all others in the podcast). When I load the project it asks if I want to search for this missing file, but when I click yes it says that it can't be found.
How can I find this file? What happened to it? Thank you for any ideas, suggestions, etc. For reference, I'm using GarageBand 3.0.4 on a MacBook Intel Core Duo 2Ghz and Mac OS X 10.4.11

no, GB wouldn't delete anything on it's own. it only deletes files for which you've deleted the entire region from the timeline and then saved
if the file is not within the projects, i'm afraid it's gone, and i can't think of any way that could happen by itself B-(>
Well i guess I should warn others that copying and pasting is very dangerous stuff! I had two podcasts- in podcast #1 GB saved the interview file as "Recording#27.aif" and in podcast #2 GB saved a little intro clip under the same name. When I pasted the intro clip from podcast #2 into podcast #1 my interview disappeared. I didn't delete it- I was never asked about it, I didn't delete the region from the timeline, etc. I have to assume that since they had the same name, GB thought I no longer needed the "Recording#27" from podcast #1 and now I can't find it anywhere! If anyone has any suggestions as to how I could find this file I would be very appreciative.

Windows Media Player for audio on one website does not load?

I have Firefox v8.01, Windows 7 OS. On one of my websites, the Windows Media Player does not load. The audio works on IE9 but not on Firefox. I have used the same code on other sites that work just fine in Firefox, IE and Chrome. I can't fix the problem because I don't know where the problem lies? I have disabled all my Firefox add-ons which provided no solution. The site is http://www.music.articleposts.com This is a blog site and the sound code is in a widget.

Hi Anni,
Welcome to  discussions
Thanks for all the info but I have tried everything and still nothing. I just don't get it.
You're welcome If I may say, you have tried everything is too broad a statement when trying to get help we need to know what you have tried.
Have you tried a freshly created test account? See this doc, on how, if you haven't see this on 10.4 & Adding a new user account to your computer, this helps to show if this is a problem isolated to your username account or system wide.
Do you have the plugin components mentioned?
Are you running 3rd party Safari extending applications?
Has Flip4mac ever worked for you?
Post a Url of the video you are trying to watch, or an example of similar would help, so we may try it.
Can you view Youtube & google vids?
• If those are your correct specs you show your os is extremely behind, missing all the fixes
the subsequent os updates & security updates offer. If they are incorrect please take a sec, to correct, adding the size of drive & ram would help as well
If you update make sure to back up your personal files & data see this document on,How to back up and restore your important Mac OS X 10.3 & 10.4 files
Look at A. Brodys post on how to update properlya. Brody now that 10.4.6 is out lets review..albeit it os 10.4.6 it still applies up to 10.4.10, his is the first post, ( this was the start of the double boot after os update.)
Apologies if you already know all this I can't not know, prefer err on the side of caution.....
• Note that your problem sounds different then the original posters problem, he doesn't speak of freezing, you are running a ppc ibook he a Macbook on 10.4.10.
Please post your own topic & articulate what the "everything" you have tried happens to be, you are more likely to get the help you need, no doubt it must be most
annoying not to be able to view what you know you can.
Good luck,
Eme'~[) / Maria

Audio on/off button is not coming in safari on iPad(iOS6)

Hi,
We have published some content using Captivate 7. We are facing a problem where audio on/off button is not being shown in safari on iPad(iOS6) while this is working fine on desktop browsers.
Thanks
-Manish

There is no reset button. To reset, hold down both the power and home buttons for perhaps 15 seconds and the iDevice will turn itself off.
But the problem you report (a blank lit screen shows for a second then disappears) is what you would get if the battery wasn't charged up. Try plugging it in for a few hours, then turning it on normally.

Audio file "Recording#01.aif" not found.

I recorded some guitar into garage band and then copied it into a new document and deleted the tracks from he original one. Now when I open the garage band file with the copied guitar tracks, it displays a message saying "Audio file “Recording#01.aif” not found."
Is there a way to find these sound files again, so that I can hear and edit them again?
Any help would be appreciated.
Thanks,
Steve

steve_sjbc wrote:
copied it into a new document and deleted the tracks from he original one.
http://www.bulletsandbones.com/GB/GBFAQ.html#saveasarchive
(Let the page FULLY load. The link to your answer is at the top of your screen)
Is there a way to find these sound files again
if you saved the original file, i'm afraid they are gone for good.

Audio file 'recording#10.aif' not found (message)

When I try to open any garageband files that contain real instrument recordings(purple recordings) I recieve a message saying "Audio file 'recording#10.aif' not found, or any other recording number... When the computer prompts me to search i tell it to, and then it comes up with the message "16 invalid region(s) changed!"
I have found the original recordings in the finder and have tryed putting them in the garage band folder...
Is the problem that the recording files have maybe changed location in the finder? If so, where does garageband send the files after they are recorded so that I can return them to there original locations?
Thanks a lot guys.

I once spent three days (long days) trying to track down and beat an "invalid region" problem, I finally had to admit defeat, nothing I tried could solve it.
where does garageband send the files after they are recorded
They are stored within the project you create. There are no scratch files.
~~HangTime [Will Compute for Food] B-(>

I created in iMovie, and extracted audio from one of the clips to use in the title sequence. All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

I created in iMovie, and extracted audio from one of the clips to use in the title sequence. All is well, export to iDVD and it plays OK, but when I burn the DVD the audio for the titles does not play. Any suggestions?

I am on a MacBook Pro with OS 10.6.7 running iMovie '11 and iDVD 7.1.1. Thanks for any input.

Resolve audio echo in 4s handset, not Bluetooth or headset?

Similar Messages

Maybe you are looking for