Resolve/FCPX playback issues w/ new Mac Pro

when I have both FCPX and Resolve open on my new Mac Pro, my playback is glitchy in both programs. In FCPX, I get black frame flashes. In resolve, it glitches out w/ neon colors and won't give a clean export/share.
Any ideas what can be causing this?
My Mac is driving a NEC 272w via a displayport> mini display cable.
Thanks!
Kyle

I've no idea what is causing the problem as I know nothing about Resolve but my reply will bump you to the top of the page giving others more chance to see your question.
Are you optimizing your footage?
Also you need to give exact details of the format you are shooting and your project specs.

Similar Messages

Audio clicks/pops in FCPX 10.1 w/ new mac pro

I recently upgraded to a new mac pro 6 core and run FCPX 10.1. I've found that my audio will 'click' at the end of a track (the way it used to in FCP7). If I use the cross fade it still clicks. If I automate the volume to cut off before the end of the track, it does not click.
This was not happening before I upgradeded to 10.1 / the new mac pro. Any ideas why this might be happening?
Thanks!
Kyle

Can't test because I don't have the new MP.
But just thinking that since there is a lot of nMP traffic at the MP forum, you might post your issue there to see if you can get a better response.
Good luck.
Russ

Migration Assistant and permissions issues with new Mac Pro

Hi There,
I've not had any significant issues with Migration Assistant in the past but I can't create a reliable system with my new Mac Pro.
After using Migration Assistant during the initial setup, my user account wasn't even transferred. I tried restarting but in the end, I followed these instructions to reset and run the assitant again: http://stationinthemetro.com/2013/11/10/make-mavericks-re-run-the-setup-assistan t
I've just finished running it for a second time, and while the user account is now on my new system, there are so many permissions issues that the system is unusable (I can't even run Safari). Creative cloud, 1Password, safari, Dropbox are all apps that give me Disk i/o or permissions errors.
If I look in the user folder, many directories within it have a red minus icon. I've tried fixing permissions using Disk Utility but something is not right.
In the past, the new system just boots like the old one but this time round, it asked me to create an account after Migration Assistant had finished - is this normal? I used the same username and password as before but I'm not sure Migration Assistantis working properly.
Does anyone know a full-proof way of fixing and transferring my account without having to spend hours downloading OSX for a full erase and install?
Any help would be much appreciated.
Cheers
Ben

Thanks for the reply,
I didn't understand exactly what to put into AppleScript sorry (never used it before) - so I just ran the following from the Terminal:
$ echo $UID
$ sudo chown -R 503 ~
And restarted - everything works now - thanks heaps.
What had happened and is this something I did or did Migration Assistant just get confused?
I have 3 new Mc Pros to setup on Monday so just want to ensure those are hassle free.
Cheers
Ben

Bizarre network autonegotiation issue on new Mac Pro

First of all, sorry if this is old news but a Google search turns up no helpful solutions even though many seem to have encountered this issue.
Just received my new Mac Pro. I connected it to a GigE port with a Cat5e cable. I was noticing what I thought to be atrocious network performance between it and my NAS (80Mbits/sec), checked the settings and lo and behold, it had autonegotiated 100Mbit/sec on the link. This is of course wrong. I tried multiple cables, including cables that are running at gig speeds (autonegotiated) to other devices.
On a lark I moved the cable from Ethernet 1 to Ethernet 2 on the Mac and bingo, it negotiated 1000Mbit/sec. So... what the heck? Why won't Eth1 do so?
Thanks in advance,
G.

When I say "brand new," I mean "brand new." I took it out of the box, plugged it in, set it up, and noticed the low autonegotiation speed (100Mbits/sec). After switching cables and switch ports, I moved the cable on the computer from Ethernet 1 to Ethernet 2, and it negotiated 1000Mbits/sec. Back to Ethernet 1, back to 100Mbits/sec.
I've seen a number of threads on this issue via Google search but never a single resolution.

New Mac Pro and Wifi

Hello all,
My Mac Pro which normally i use in my work (i work as a DIT), can't connect to internet using WIFI connection....why?
I am running Mavericks 10.9.4 and this last update of Mavericks was, as you told, to correct this issue on new Mac Pro.
But simply doesn't connect.
What to do?
Any new update coming?
Many Thanks.
nuno.

When i try to connect to this network, the computer scans and scans and scans and never blocks the signal.
No error messages.
Yes, other devices connect to this wifi network, like my macbook pro, my iphone etc etc and no problems.
yes, it used to connect before, but not such many time....
the problem started in 10.9.3 and when the 10.9.4 update came out, i was glad because it was an issue to fix...
then connected one or two times and then nothing again....
i've never did a network diagnostics, but i can do it...not today because this computer is at the house i work with,
but i'll do it this week.
the only way i can connect to internet on this Mac Pro, is to connect to my MacBook Pro via ethernet and then the MacBook Pro shares the internet,
is the only way. (never connected directly to a router using a net cable - ethernet, but i think it also works.)
The problem here is the WIFI. Always the WIFI.
Thanks.
n.

New mac pro playback issues & sluggish

got my new mac pro this week. wanted a fesh start, so didn't migrate anything. started by installing my must-have apps: adobe cc, ableton, apogee, fontexplorer, natove instrument komplete. everything worked great. then suddenly, when vreating a simple project in premiere, playback didn't work. and neither in quicktime nor itunes. started seeing the beachball in many apps, everything totally sluggish. started deleting apps, but nothing seemed to help. anybody had similar issues?

My own remedy is more of the ounce of prevention:
Clone the system so you have the nice vanilla system as it was backed up to another drive volume or sparse image.
One person runs multiple copies of Mavericks in VMs using VMware Fusion to allow testing any changes first; restore a VM back to before changes, or to switch a VM to a boot image.
Create a bootable clone of the system, before making changes, in case a system does go south, or just for testing.
Sluggish is so common but generic, and how many apps run concurrently or have been tested to work even with 10.9.1 builds along with change to new hardware?
The things we may not see or be aware of, might be like this one uncovered and mentioned on Ars:
In our recent review of the late 2013 Mac Pro, one of our sticking points was the OpenGL performance that trailed Windows on the same hardware. A particularly damning case was the high-polygon-scene performance in Autodesk Maya showing how OpenGL viewport 2 performance fell off a cliff when you pushed into very high polygon counts of over 20 million with the D700 in OS X.
While this issue still needs to be resolved for some programs like modo, some quick sleuthing by Apple and AMD shows that the problem was on the Autodesk side. Maya was not simply querying the GPU RAM; for some reason, it was using a hard ceiling on OS X, so the brutal performance hit was the result of that ceiling. Once you explicitly tell Maya to use your available VRAM with the environment variable MAYA_OGS_GPU_MEMORY_LIMIT=6000 in ~/Library/Preferences/Autodesk/maya/2014-x64/Maya.env, performance is perceptibly the same as in Windows in Boot Camp with very large scenes:
If you have a GPU with more than 1GB of VRAM, I highly recommend setting this environment variable to your GPU's VRAM amount. This issue will reportedly be fixed in Maya 2015, but Maya is clearly an absolutely massive program with some annoying issues—here is my blog post on how to fix Maya performance when the Help Line is visible in OS X.
So, fellow Maya users, I just need to implicate Apple in another 17,000-word article about our other bugs, and we'll have them fixed in no time! This brings us to the question of why I thought to blame this on drivers and not the Mac Maya version to begin with. It's odd that this Mac-only hard-coded VRAM amount existed at all because Maya is very much the same beast on all platforms, and from my knowledge of it as a beta tester, platforms don't get specific attention for tuning, and that's the case for the dominant platform as well. That's why I assumed that this was a driver bug and not Maya-specific.
Anyway, we'd like to thank AMD and Apple for their quick work with Autodesk to resolve this issue. We'll be updating the review today to account for this new information.
http://arstechnica.com/apple/2014/02/2013-mac-pro-firepro-d700-opengl-is-better- than-we-thought-it-was/
I don't always follow my own advice, sometimes it works out, sometimes not, but any OS like Apple's needs a couple updates, and any new hardware needs some firmware revision, chips, changes in production, and time to ah "field test" new system in the real world.

Fcpx poorly optimised for the new mac pro?

'm experiencing low playback performance on fcpx 10.1.2 on my new mac pro:
I'm on a 8-core, 64GB, d700 (project and files are all on the main drive. Im on the latest maverick update.
Im working on prores 1080p and adding some effects to a clip and my playback really drops, so far I have been testing a few plugins such as hawaki "auto-split" or coremelts "track & slice X". I instantly need to render the effects to see the results, the funny thing is the same plugins runs smoothly on my macbook retina.. It made me wonder maybe the 3rd party plugin isn't optimised for the new mac pro but then I tried hawaki auto-split on Premiere cc 2014 and I was getting way better results than fcpx..
This may seem like a trival thing but paying this much money for a product and having a bigger project with different plugins this gets really annoying..
Anyone else experiencing any issues?

QX 10 is QuarkXpress (version 10 - latest version) – a pro publishing/page layout application. Adobe InDesign knocked QX off its throne over a decade ago. Now that Adobe have introduced their subscription model (as opposed to their former purchase upfront model), many pros like me are now looking for alternatives. QX is about the most likely. I'm just doing some homework before I jump (after all it's my livelihood we're talking about here).

New MAC PRO: itunes audio playback-stuttering, glitching, skipping

I have a brand new mac pro 3.2ghz quad, with 8gb ram (bought a couple weeks ago). All seems fine with the exception of brief skips, glitches and stutters with audio playback in itunes. I tried updating to itunes 11 and this did not resolve the problem. My music files play fine on my girlfriends macbook pro (purchased over a year ago), and never had any problems on my old machine (imac 24inch aluminum). I went to apple with the problem and after multiple system recoveries they determined that the computer was faulty and sent me a replacement. I just received the replacement and tested out some downloaded music from the itunes store and the same problem happened. Am I just unlucky to get two computers with this issue? Is it the Mac Pros? Has anyone had this issue with mac based machines, specifically the mac pros? I saw another thread on the issue but seemed to be primarily windows users running itunes. The skipping happens as frequent as every 20-30 seconds to every few minutes, but it is definitely enough to notice
Thanks.
Baffled,
Greg

Hi Greg.
I seem to have discovered this problem this weekend. I listen to a lot of music from my apple devices and have done for years. What I have noticed this weekend is that both my Macbook 2008 and iMac late 2010 both suffer with a brief stutter every minute or so making the enjoyment of listening to music a little annoying. Both are running Mountain Lion 10.8.2. My iMac is running the 2.93 GHz intel i7 processor with 8GB ram. Playing music should be a doddle!
From my point of view both Macs are running independently to external speakers. The music I am running on those 2 devices has been ripped on both devices. e.g. Macbook has ripped and plays Apple Lossless format and my iMac has ripped and plays songs in 320kbps. My guess is its a bug with the new iTunes 11 or Mountain Lion although I have been using 11 since its release.
While I'm not able to supply a fix I think its safe to say its not your new Mac Pro. One other thing to note is that I have been running up until this weekend a 7 or 8 year old Mac Mini as a media device in my kitchen playing Apple Lossless format with no issues at all. This device however is running Snow Leopard with all updates applied. The Macbook is now playing the Lossless music with stutters that was ripped on the Mac Mini that was playing OK.
So is the problem Mountain Lion?
Take care
Paul

Urgent Issue New Mac Pro (Im going CRAZY)

I recently purchased a MAC Pro with the following specifications:
Processor Name: Quad-Core Intel Xeon
Processor Speed: DUAL 2.26 GHz
Total Number Of Cores: 8
L2 Cache (per core): 256 KB
L3 Cache (per processor): 8 MB
Memory: 6 GB
Graphic Card:
Chipset Model: NVIDIA GeForce GT 120
and I seem to be getting very slow results in Motion. I have an IMAC with motion and it is able to process and playback faster than on my MAC PRO.
FCP is a thousand times faster but I am mainly working with Motion.
Also when I am on the internet and looking at some websites with Flash I notice a slower results with the MAC PRO
I am guessing my issue here is with the Graphics Card..
But How WHAT? I am using a NVIDIA GeForce GT 120 (I know its not super fast but faster than that on my IMAC)
Is there some type of control of allowing me to use more of the graphics card? I just am wondering if the graphics card is being maximized and if it is what does this mean? I know that I could buy another NIVIDA GeForce GT 120 but will my system be able to use them both. I am using Leopard and I know that the software like motion and even leopard are limited to how much of the graphics card may be used.
Ahhh
Please help!!

First, what versions of FCS/OS are you using on your i-Mac and what versions on your new Mac Pro?
Second, Motion does not like working with more than one card installed, however, I have two 2400HD cards installed and have no problems with motion (FCS 2). Some believe the two card problem is with Plugs, not Motion. I tend to agree.
Third, there is a known problem with Flash player in both Macs and PCs. I answered this question yesterday on this dissucussion board. You need to uninstall all traces of Flash player and then reinstall the latest player. The uninstaller, instructions and info about the problem is on the Adobe support page.
Post back with the info from my first comment and we'll go from there.

New Mac Pro major issue's with Premiere CC 14

I bought the latest Mac Pro with top spec but it runs like a pig with Premiere cc 14, Adobe's video shows the Mac works perfectly. However mine takes forever to render, and has a jerky image on full quality playback with some clips, tried multiple setting, also been on the forum about open cl and open gl and other forums saying it's a mac issue and other saying it's adobe issue
Has anyone got a solution.
Would Adobe like to comment on the issues with the new Mac Pro's

I add to Jason's response with this: If you are having any suspicious behavior with Premiere Pro CC 2014 running OS X 10.9.4, please update your permissions to Read/Write first. Your permissions may be set to Read Only (this happens when you update, rather than clean install OS X). See this link: fixing permissions problem that impedes start of Adobe applications | After Effects region of interest
This forum post details the process: Re: Premier Pro 2014 is very sluggish
Thanks,
Kevin

IMac vs the new Mac Pro for video editing in FCPX?

Hi.
I am currently using a macbook air for all my editing and rendering of videos in FCPX. The editing process is reasonably smooth when dealing with shorter clips, but when I tried to edit multicam clips, things started to slow down. Also, the rendering and compression processes are tedious. I am planning to edit and process a much larger number of videos in the next years to come, so I have decided to do a serious upgrade of my system.
For the moment, I am torn between a maxed out iMac 27", which would be the cheapest alternative, and the 6 core Mac Pro or 4 core Mac Pro.
When I look at benchmarks of the new Mac Pro's in Geekbench, the iMac is never very far away in terms of performance. Does tests like this tell anything about how well the Mac Pro will perform in FCP? Does the hardware in the Mac Pro have features which makes it superior to the iMac, in other ways than for example the "pure power" of the CPU and GPU?
Christopher.

FCP X 10.1, Motion 5.1 Updates w/Dual GPU Support (new Mac Pros) (from Thursday)
Apple released Final Cut Pro X 10.1 Thursday with support for Dual GPUs in the new Mac Pro and more.
Long list in the Final Cut Pro X 10.1 Release Notes that also links to info on How to back up important FCP X 10.0.x files before updating. (Today's Apple docs listing also has more related to Final Cut Pro X 10.1.)
Also out today are Compressor 4.1 and Motion 5.1. Full release notes below but here's a clip from the App store Motion 5.1 changes:
Optimized playback and rendering using dual GPUs in the new Mac Pro
FxPlug 3 with custom plug-in interfaces and dual-GPU support
Faster project loading, especially for complex projects
Share directly to YouTube at 4K resolution
Spanish language localization
Dual FirePro Dxxx Rendering FCP-X
http://www.barefeats.com/tube05.html
Intel Xeon processors are designed to run 24/7 and stay cool and under load.
Mac Pro so far hold up strongly for years, easy to add and upgrade RAM and processor, and maybe, hopefully, even the twin GPUs. Thunderbolt2 for all your projects and storage as well.
6 or 8-cores is going to walk away from iMac which is breathing hard and not designed for constant heat. Haswell was designed to conserve and reduce.

New Mac Pro 2013 late version USB 3.0 hub issue during boot

Hi all, I just purchased a new Mac Pro 8 core with 32GB of ram and 1 TB drive. When I connect a USB powered 3.0 hub and turn on my Mac Pro, it gets hung on while booting. (Gray screen before the Apple logo appears on boot). If I pull the USB 3.0 hub out, the Mac Pro proceeds to boot normally. Once I am fully booted on my Mac Pro and I plug the USB 3.0 hub back in, everything seems to work fine. I have an enclosure that works off of lightening connector and the enclosure has a USB 3.0 hub onboard. I plug the USB 3.0 hub in that device and every thing seems to boot up fine on the Mac Pro. Any idea why when I plug in the USB 3.0 directly why the Mac Pro ha issues booting up?
Thanks in Advance.

The Driver for the Hub does not get loaded until late in the Boot-up process.
It is common not to be able to use devices on a Hub during boot-up, as they will not be ready (and therefore not available) until the Login screen appears.
For devices you need during boot-up, attach directly to a built-in USB port on the chassis, not on a display or any other Hub.
If your issue is only that the device interferes with Booting in general, ask the guys at OWC. They select their stocked items for trouble-free, and train their support people to resolve remaining problems quickly. If there is a problem, they will help you get is fixed quickly -- often providing an advanced exchange if that seems appropriate.

My brand new mac pro always had Internet connection issues at school. WHY is that? I see the school's Internet working perfectly fine on other PC's, but there is never a day where my mac doesn't have Internet connection issues at school. How do I fix it?

I got my mac pro in the middle of August. School started the week after. Internet was working perfectly fine at home. But at school, I never had a good connection. Sometimes on the good days I get a connection when I'm sitting at the exact spot in class I always sit at. It's ridiculous and it's frustrating. I invested my money into this laptop and I'm beginning to regret it. I thought it was the school's Internet, but I don't see Internet issues with other PC users. It's most frustrating on registration days and I'm trying to register for my classes before it gets taken, but again... Internet connection issues. It's random. Majority of the time, it doesn't work at all. I've done Network Diagnosis and turning WiFi off then turning it on again. I've done everything I could. I put my money on this laptop and it was a lot of money. I could have bought an 800 dollars laptop and I would have Internet connection anywhere on campus. So, I don't want to continue everyday to regret on buying this laptop every time I try to connect to the Internet at school or Starbucks or anywhere else. How do I fix this? What's the problem ?
At school, I heard this guy had a problem with Internet connections too and he owned a new mac book pro. He said something like Apple messed up on something, but he fixed it. If I knew mac book pro's had these issues I wouldn't have bought it in the first place. It's freezing on me every other day. It's ridiculous. But what concerns me the most is the Internet connection. So someone please tell me what can I do next to prevent the problem? Am I doing something wrong maybe?

Hi Kevin,
I'm using an XLR input mic which is connected to the phantom power enabled XLR mic socket on a USB M-Audio M-Track. The M-Track is connected by USB to the Mac Pro - so effectively I've got an M-Audio USB soundcard with a mic input. I've also tried a microphone that is a straight XLR to USB cable (guessing with some soundcard chip buried in the usb plug) but that also yields the same effect of bad latency, intermittent quality, stuttering and repeating and echoing (without the speakers on during record so its not feedback).
The mic works absolutely fine with other recording applications I have on the mac at the moment - albeit non-adobe ones (tested it on the EasyAudioRecorder - and it lives up to its name. it's easy)
I will try with Audition and report back, but sitting here right now I can imagine it would work fine with audition too - it just seems to be the way premiere is set up for recording into the timeline is a bit sketchy. I'm willing to accept it might well be a quirk with the new Mac Pro trashcan - I'm not weighting all the woes on premiere.
Any thoughts or am I out of luck to sit with my fingers crossed for a fix in the next round of updates?
Nathan.

After migrating to new Mac Pro Dreamweaver won't launch, says missing menus.xml file. How do I resolve this?

After migration to a new Mac Pro Dreamweaver CS6 won't launch. It says it is missing menus.xml file. How do I resolve this?

Hi rustyg12,
Go to Applications/Adobe Dreamweaver CS6/Configuration/Menus/menus.bak
You'll see a menus.xml there - it is a backup copy of the actual menus.xml file that DW uses.
Copy it from that folder, paste it 1 level above (in Menus folder).
Fire up DW. See if it works.

Has anyone had issues with the new Mac Pro computers and the Adobe Application Manager?

We just purchased a new Mac Pro and transferred everything from the old computer to the new one. Now we are getting Adobe Application Manager errors and it wants us to download Application Manager. That leads us to the Adobe Installer that encounters the following issues
Installer failed to initialize. Please download Adobe Support Advisor to detect the problem. But that doesn't work either.
Anyone run into this?

Yep, half of my tracks are coming up displaying an error -69 ( http://docs.info.apple.com/article.html?artnum=302684 ) and every time I remove a track from the shuffle or update the shuffle, Itunes opens a window displaying the contents of J:\ (obviously the ipod) and hidden folder \iPod_Control.... I'm really irked with this. Been mucking around with the stupid thing for hours now.
Nothing was wrong with it until it suddenly decided to stop working, it wouldn't play tracks and Itunes wouldn't recognise it, hadn't missed a beat up till now. Sifted through the Support site for an answer and getting told I needed to update Itunes and update the Ipod software, ***?? It was working fine before. Me thinks Apple have inserted software in ipod to force users to update to newer version of Itunes. Anyway, ever since updating to the latest Itunes, the Ipod is back in action, but it is trying to tell me that half of my mp3s are corrupt (see error -69), rofl, um no, it's your stupid software Apple, I'm off to by myself a decent MP3 player without the bloat software.

Resolve/FCPX playback issues w/ new Mac Pro

Similar Messages

Maybe you are looking for