[Resolved] Borkage after Upgrade (A Kernel or SSL Upgrade Error?)
Turned my x121e on this morning and felt like a quick System upgrade. In came groff, a filesystem package, ssl, and the newest kernel Arch is sending out. Once complete, I rebooted- the machine would not reboot itself, and froze. So I had to hard reboot. On the next bootup there was an error of some filename being too short (sorry cant remember precise error), and then after that the system boots, but the text size in console has changed, graphics seem slightly different, and when I login I cannot use trackpoint or touchpad, DWM is without wallpaper, all dwm-panel just default. It doesn't turn off from pressing hardswitch (it used to, very quickly), I can't open anything.
I am at a complete ends immediately. All I can think of is the few grub parameters I've added, but these were working perfectly up until the upgrade, and probably should not be mentioned here.
I will look into rolling back the upgrades. I can try and provide any info- though do not have connection for Arch at the moment as not running in X and don't have wired around currently (should do later).
I would really appreciate some help with this if anyone can.
Thank you.
Last edited by dura (2013-03-03 17:31:19)
Ok, so I chrooted into my system with usb, then tried to downgrade the kernel to what was used before 3.7.7-1, following the wiki page on downgrading the kernel.
Pacman then reads an error:
Error while loading shared libraries: /usr/lib/libcrypto.so.1.0.0:file too short
Incidentally, there was also a ssl upgrade as part of the -Syu this morning. I expected nothing from it, but read elsewhere off an ssl upgrade causing multiple errors.
Stumped again really.
Not sure if the original error message was anything to do with kernel: all I can state is was either mkinit related, or libcrypto related (sorry- I'd literally just woken up when I -Syu'd).
Thank you for any ideas.
Last edited by dura (2013-02-16 16:50:52)
Similar Messages
-
ITunes won't start after upgrade--error message
When I launched iTunes after upgrading to 6.0.1, I got the following message after agreeing to the usual legal terms:
"The folder "iTunes" cannot be found or created, and is required. The default location for this folder is inside the "Music" folder."
Any suggestions?Jeff,
Thank you for the reply and your suggestions.
Yes, I did take a look in the Music folder--and no, the file was not there. I then used Spotlight and did find an iTunes Music folder, but when I tried to copy it to the Music folder I got error message -36, saying that parts of the file weren't readable and, therefore, not copyable.
I also used my disk utility to repair permissions and re started the computer---with the same results.
I'm not sure what else to try and may take my computer to my local expert.
best,
als -
'RSTS_READ' after upgrade error Required conversion not possible (ZFORM16)
Hi,
We have recently upgraded from SAP 4.7 to SAP ECC 6.0.
For client requirements, they have developed ZFORM16 in 2006 by copying the standard form HINCF160.
But after upgradation, when we execute ZFORM16 for 2006 data we are getting the error message:
Required conversion not possible
Some analysis of the issue is:
1) In include: ZPCF16IN3 at statement: PERFORM read_temse. " MDSNT927906
2) It is going to include : ZPCF16IN8 we are getting the error message at the statement :
call function 'RSTS_READ'
The error message is: Required conversion not possible
When I have checked the standard of form 16 HINCF160 code in ECC 6.0 is as:
In include PCF16IN3, PERFORM read_temse. Statement is commented and the corresponding form in PCF16IN8 include is also commented (Form read_temse) and now SAP is using different logic to get the DETAILS OF TAX DEDUCTED.
If I try to comment the PERFORM read_temse in ZPCF16IN3 then I am able to get the Form16 but DETAILS OF TAX DEDUCTED are not displayed. DETAILS OF TAX DEDUCTED logic is in PERFORM read_temse in ZPCF16IN3.
Can someone help me in solving the issue?
Regards,
PremWe had to restart SAP & Oracle and the issue is solved
-
[solved..quickly!] After upgrade: error: libusb...exists in filesystem
After updating my file system trying to get Arch working. After the files download, there are several error messages saying that;
error: failed to commit transaction (conflicting files)
libusb: /usr/include/libusb-1.o/libusb.h exists in fielsystem
libusb: /usr/lib/libusb-1.0-a exists in filesystem
libusb: /usr/lib/libusb-1.0.so exists in filesystem
libusb: /usr/lib/libusb-1.0-so.0 " " "
" " " 10.so.0.0.0 " "
" /usr/lib/pkgconfig/libusb-1.0.pc " "
Errors occurred, no packages were upgraded.
What's the workaround when i see this?
Last edited by pottzie (2011-06-20 03:15:52)Amazed at how fast the response was, looks like I'm not the first person to ask..
I ran the first file and got:
pacman -Qo /usr/include/libusb-1.0/libusb.h is owned by libusb1 1.0.8-1
I ran /usr/include/libusb-1.0/libusb.h through the bug report and it said "search returned no results"
I haven't run the remaining files through the bug report search, but all files are owned by libusb1 1.0.8-1
Last edited by pottzie (2011-06-20 03:11:45) -
In Firefox settings: SSL 3.0 is used, no proxy, network.dns.disableIPv6 set to true. The Mac OS firewall has been tested as turned off/on, but still no secure website (e.g. gmail) can be loaded. This happened first after the upgrade to 3.6.6. I then trashed 3.6.6, freshly installed 3.6.10 from scratch, same thing.
What a ridiculous glitch... wasted 3 hours on this already. About to move to other browsers after many years on firefox...
The whole error message (note the website.... )===========
Secure Connection Failed
An error occurred during a connection to support.mozilla.com.
Can't connect securely because the SSL protocol has been disabled.
(Error code: ssl_error_ssl_disabled)
* The page you are trying to view can not be shown because the authenticity of the received data could not be verified.
* Please contact the web site owners to inform them of this problem. Alternatively, use the command found in the help menu to report this broken site.yes - I have the same issue on four different people's new MacBook Pro's on 10.6.4. I have deleted the Profiles numerous times, but the issue still occurs at least once every two weeks.
-
Firefox will not start after upgrade: error code 2324
I upgraded Firefox on my workstation running Windows 7 Enterprise (64-bit). The stub installer downloads and runs through the installation, but does not start Firefox automatically. If I click on the link in the taskbar, nothing happens. Same with the one pinned to the start menu. If I go to the Mozilla folder and load Firefox from there, I get a message saying "The installer encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2324."
Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [https://support.mozilla.org/en-US/kb/troubleshoot-and-diagnose-firefox-problems?esab=a&s=troubleshooting&r=3&as=s#w_5-reinstall-firefox here].
<b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be recovered unless they have been backed up to an external device!</u>
Please report back to see if this helped you!
Thank you. -
Need help resolving Web Cache upgrading error
I successfully installed 10g AS on top of my 9i AS (9.0.3) on a different Oracle home. Then I proceeded to run the Upgrade Assistant (iasua.bat). Everything went well except the upgrade of Web Cache failed. I'm only installing/upgradeing the J2EE and Web Cache. Any help would be greatly appreciated.
I'm running on XP SP2.
the following are the lines in iasua.log related to the error:
2007/04/04 21:10:22.890 GMT NOTIFICATION:1 Framework: Starting to upgrade WebCache.
2007/04/04 21:10:23.515 GMT ERROR:1 WebCache: Invalid element 'MULTIVERSIONHEADERSRULE' in content of 'CACHEABILITYRULE', expected elements '[SELECTORS]'.
2007/04/04 21:10:23.515 GMT ERROR:1 WebCache: Unable to upgrade file C:\Oracle\ora9ias\webcache\webcache.xml
2007/04/04 21:10:23.515 GMT NOTIFICATION:1 Framework: Finished upgrading WebCache with status: Failure.What that means is Silverlight can't find a required component.
When I clicked on the site, it loaded pretty slow but I got to see the login screen without error.
Either the expected dll is cached on my machine or you have an intermittent problem.
As I'm a some-time Silverlight developer I could well have necessary dll if they are standard components.
As an outside chance...
You could try clearing your cache in case it's a versioning issue.
Failing that, I suppose you could maybe install the Silverlight and blend sdk.
One thing you could easy try.
Does Silverlight work for you generally?
Follow the link on this page:
http://social.technet.microsoft.com/wiki/contents/articles/30387.silverlight-trouble-shooting-installs.aspx
If that errors then it's the install on your machine.
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML -
Error after upgrade "Error Executing Database Query. "
I have set up a new server with CF MX 6.1. I have moved code
from a CF 5 server. Now I am getting a lot of errors like this one.
They all vary somewhat but seem to be related to two things. The
problems seem to occur with CFINSERT to an access database. I have
been trying to fix this for some time now and would appreciate any
input. I have installed both the cf 'service pack' and a hot fix
that I thought was related directly to this.
Error Occurred While Processing Request
Error Executing Database Query.
[Macromedia][SequeLink JDBC Driver][ODBC
Socket][Microsoft][ODBC Microsoft Access Driver] Syntax error in
INSERT INTO statement.
The error occurred in
C:\Inetpub\vhosts\mysite.com\httpdocs\Ezedit\act_insert.cfm: line
14
Called from
C:\Inetpub\vhosts\mysite.com\httpdocs\Ezedit\index.cfm: line 53
Called from
C:\Inetpub\vhosts\mysite.com\httpdocs\Ezedit\act_insert.cfm: line
14
Called from
C:\Inetpub\vhosts\mysite.com\httpdocs\Ezedit\index.cfm: line 53
12 : <CFELSEIF #ProductScan.Recordcount# IS 0>
13 :
14 : <CFINSERT DATASOURCE="mysite" TABLENAME="#Table#"
username="admin" password="">
15 :
16 : <CFQUERY datasource="mysite">
SQL insert into Products
(WIDTH,HOTBUY,RETAIL1,REPEAT,HEIGHT,PRODUCTTITLE,JOIN,AJOIN,MATERIAL,OBJECTGROUP_ID,BOOKN AME,OBJECTGROUP_ID2,VJOIN,PRODUCTDESCRIPTION1,LENGTH,SAMPLE,MANUFACTURERPARTNO)
values ( (param 1) , (param 2) , (param 3) , (param 4) , (param 5)
, (param 6) , (param 7) , (param 8) , (param 9) , (param 10) ,
(param 11) , (param 12) , (param 13) , (param 14) , (param 15) ,
(param 16) , (param 17) )
DATASOURCE mysite
VENDORERRORCODE -3502
SQLSTATE 42000
Please try the following:<CFINSERT DATASOURCE="mysite" TABLENAME="#Table#">
Probably an error. The tag assumes implicitly that a form has
been submitted. In fact, one of its attributes is "formfields".
Since you leave out the attribute, Coldfusion assumes it has to
insert all the fields of a submitted form. You should put the tag
within the block
<cfif isDefined("form.someFormField")>
</cfif> -
My Arch is very slow after upgrading to kernel 3.0
Hi men! This is my first post on this forum, i'm italian and i'm using archlinux since 4 months (sorry if my english is bad)... I would like you to help me to solve a problem: as i wrote in object my system has became very slow after upgrading to kernel 3.0: system booting, applications launch, general responses of my tasks....what's the problem? How can i resolve it? Thanks!!
However the kernel26-lts looks slower than 3.0 so i returned to the last one...iìm going to see dmesg outputs...i've to remove "quiet" from the grub.cfg
EDIT: I've checked but no error is shown....this is dmesg.log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Tue Aug 16 08:44:20 CEST 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/ea679d77-65a5-4cc3-b46e-286b953789f7 resume=/dev/sda9 ro vga=0x3f0 nomodeset
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dee74000 (usable)
[ 0.000000] BIOS-e820: 00000000dee74000 - 00000000deebc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000deebc000 - 00000000deecd000 (reserved)
[ 0.000000] BIOS-e820: 00000000deecd000 - 00000000deedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000deedf000 - 00000000deee0000 (reserved)
[ 0.000000] BIOS-e820: 00000000deee0000 - 00000000deee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000deee3000 - 00000000def11000 (reserved)
[ 0.000000] BIOS-e820: 00000000def11000 - 00000000def12000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000def12000 - 00000000def15000 (reserved)
[ 0.000000] BIOS-e820: 00000000def15000 - 00000000def17000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000def17000 - 00000000def1b000 (reserved)
[ 0.000000] BIOS-e820: 00000000def1b000 - 00000000def1e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000def1e000 - 00000000def22000 (reserved)
[ 0.000000] BIOS-e820: 00000000def22000 - 00000000def31000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000def31000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000118000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Sony Corporation VPCEC1M1E/VAIO, BIOS R0300Y8 07/20/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x118000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 base 100000000 mask FE0000000 write-back
[ 0.000000] 4 base 118000000 mask FF8000000 uncachable
[ 0.000000] 5 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdee74 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fc980] fc980
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dee74000
[ 0.000000] 0000000000 - 00dee00000 page 2M
[ 0.000000] 00dee00000 - 00dee74000 page 4k
[ 0.000000] kernel direct mapping tables up to dee74000 @ dee6e000-dee74000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000118000000
[ 0.000000] 0100000000 - 0118000000 page 2M
[ 0.000000] kernel direct mapping tables up to 118000000 @ 117ffa000-118000000
[ 0.000000] RAMDISK: 37c76000 - 37e33000
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 Sony)
[ 0.000000] ACPI: XSDT 00000000def1ce18 0005C (v01 Sony VAIO 20100720 MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000def15d98 000F4 (v04 Sony VAIO 20100720 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110413/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xDEF2DF40/0x00000000DEF30D40, using 32 (20110413/tbfadt-489)
[ 0.000000] ACPI: DSDT 00000000deecd018 0ADBB (v01 Sony VAIO 20100720 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000def2df40 00040
[ 0.000000] ACPI: APIC 00000000def1bf18 0008C (v02 Sony VAIO 20100720 MSFT 00010013)
[ 0.000000] ACPI: MCFG 00000000def2fd18 0003C (v01 Sony VAIO 20100720 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000def2fc98 00038 (v01 Sony VAIO 20100720 MSFT 00000003)
[ 0.000000] ACPI: SLIC 00000000def28a18 00176 (v01 Sony VAIO 20100720 Sony 01000000)
[ 0.000000] ACPI: SSDT 00000000def16018 009F1 (v01 Sony VAIO 20100720 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000def15c18 0014B (v01 Sony VAIO 20100720 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000118000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000118000000
[ 0.000000] NODE_DATA [0000000117ffb000 - 0000000117ffffff]
[ 0.000000] [ffffea0000000000-ffffea0003dfffff] PMD -> [ffff880113800000-ffff880116ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00118000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000dee74
[ 0.000000] 0: 0x00100000 -> 0x00118000
[ 0.000000] On node 0 totalpages: 1011202
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 894636 pages, LIFO batch:31
[ 0.000000] Normal zone: 1344 pages used for memmap
[ 0.000000] Normal zone: 96960 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dee74000 - 00000000deebc000
[ 0.000000] PM: Registered nosave memory: 00000000deebc000 - 00000000deecd000
[ 0.000000] PM: Registered nosave memory: 00000000deecd000 - 00000000deedf000
[ 0.000000] PM: Registered nosave memory: 00000000deedf000 - 00000000deee0000
[ 0.000000] PM: Registered nosave memory: 00000000deee0000 - 00000000deee3000
[ 0.000000] PM: Registered nosave memory: 00000000deee3000 - 00000000def11000
[ 0.000000] PM: Registered nosave memory: 00000000def11000 - 00000000def12000
[ 0.000000] PM: Registered nosave memory: 00000000def12000 - 00000000def15000
[ 0.000000] PM: Registered nosave memory: 00000000def15000 - 00000000def17000
[ 0.000000] PM: Registered nosave memory: 00000000def17000 - 00000000def1b000
[ 0.000000] PM: Registered nosave memory: 00000000def1b000 - 00000000def1e000
[ 0.000000] PM: Registered nosave memory: 00000000def1e000 - 00000000def22000
[ 0.000000] PM: Registered nosave memory: 00000000def22000 - 00000000def31000
[ 0.000000] PM: Registered nosave memory: 00000000def31000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffa00000
[ 0.000000] PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880117c00000 s78464 r8192 d23936 u262144
[ 0.000000] pcpu-alloc: s78464 r8192 d23936 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 995517
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/ea679d77-65a5-4cc3-b46e-286b953789f7 resume=/dev/sda9 ro vga=0x3f0 nomodeset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3909052k/4587520k available (4064k kernel code, 542712k absent, 135756k reserved, 3304k data, 712k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 32505856 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] spurious 8259A interrupt: IRQ7.
[ 0.003333] Detected 2127.784 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4257.88 BogoMIPS (lpj=7092613)
[ 0.000008] pid_max: default: 32768 minimum: 301
[ 0.000120] Security Framework initialized
[ 0.000125] AppArmor: AppArmor disabled by boot time parameter
[ 0.000524] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001546] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001968] Mount-cache hash table entries: 256
[ 0.002354] Initializing cgroup subsys cpuacct
[ 0.002387] Initializing cgroup subsys memory
[ 0.002403] Initializing cgroup subsys devices
[ 0.002406] Initializing cgroup subsys freezer
[ 0.002408] Initializing cgroup subsys net_cls
[ 0.002410] Initializing cgroup subsys blkio
[ 0.002461] CPU: Physical Processor ID: 0
[ 0.002462] CPU: Processor Core ID: 0
[ 0.002468] mce: CPU supports 9 MCE banks
[ 0.002478] CPU0: Thermal monitoring handled by SMI
[ 0.002487] using mwait in idle threads.
[ 0.003640] ACPI: Core revision 20110413
[ 0.019108] ftrace: allocating 16144 entries in 64 pages
[ 0.025543] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.058531] CPU0: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz stepping 02
[ 0.163154] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.163161] ... version: 3
[ 0.163162] ... bit width: 48
[ 0.163164] ... generic registers: 4
[ 0.163165] ... value mask: 0000ffffffffffff
[ 0.163167] ... max period: 000000007fffffff
[ 0.163168] ... fixed-purpose events: 3
[ 0.163169] ... event mask: 000000070000000f
[ 0.183294] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.209823] Booting Node 0, Processors #1
[ 0.209829] smpboot cpu 1: start_ip = 99000
[ 0.303122] CPU1: Thermal monitoring handled by SMI
[ 0.323240] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.343129] #2
[ 0.343133] smpboot cpu 2: start_ip = 99000
[ 0.436405] CPU2: Thermal monitoring handled by SMI
[ 0.456532] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.476405] #3
[ 0.476409] smpboot cpu 3: start_ip = 99000
[ 0.569682] CPU3: Thermal monitoring handled by SMI
[ 0.589820] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.596326] Brought up 4 CPUs
[ 0.596331] Total of 4 processors activated (17030.31 BogoMIPS).
[ 0.598893] devtmpfs: initialized
[ 0.600028] PM: Registering ACPI NVS region at dee74000 (294912 bytes)
[ 0.600036] PM: Registering ACPI NVS region at deecd000 (73728 bytes)
[ 0.600039] PM: Registering ACPI NVS region at deee0000 (12288 bytes)
[ 0.600041] PM: Registering ACPI NVS region at def11000 (4096 bytes)
[ 0.600042] PM: Registering ACPI NVS region at def15000 (8192 bytes)
[ 0.600044] PM: Registering ACPI NVS region at def22000 (61440 bytes)
[ 0.600970] print_constraints: dummy:
[ 0.601050] NET: Registered protocol family 16
[ 0.601156] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.601159] ACPI: bus type pci registered
[ 0.601319] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.601322] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.613921] PCI: Using configuration type 1 for base access
[ 0.614412] bio: create slab <bio-0> at 0
[ 0.616187] ACPI: EC: Look up EC in DSDT
[ 0.626457] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.646350] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.646723] ACPI: SSDT 00000000def1ac18 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.647118] ACPI: Dynamic OEM Table Load:
[ 0.647121] ACPI: SSDT (null) 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.647269] ACPI: SSDT 00000000def18018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.647646] ACPI: Dynamic OEM Table Load:
[ 0.647648] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.666577] ACPI: SSDT 00000000def19a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.667016] ACPI: Dynamic OEM Table Load:
[ 0.667018] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.676431] ACPI: SSDT 00000000def17d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.676844] ACPI: Dynamic OEM Table Load:
[ 0.676846] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.089727] ACPI: Interpreter enabled
[ 1.089731] ACPI: (supports S0 S3 S4 S5)
[ 1.089754] ACPI: Using IOAPIC for interrupt routing
[ 1.120583] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.120814] ACPI: No dock devices found.
[ 1.120815] HEST: Table not found.
[ 1.120818] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.121147] \_SB_.PCI0:_OSC invalid UUID
[ 1.121149] _OSC request data:1 8 1f
[ 1.121153] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.121658] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.121661] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.121663] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.121666] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 1.121668] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 1.121670] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 1.121672] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 1.121675] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 1.121677] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 1.121679] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
[ 1.121692] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 1.121712] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 1.121730] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[ 1.121757] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.121761] pci 0000:00:01.0: PME# disabled
[ 1.121809] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 1.121841] pci 0000:00:16.0: reg 10: [mem 0xf5e0a000-0xf5e0a00f 64bit]
[ 1.121922] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.121927] pci 0000:00:16.0: PME# disabled
[ 1.121966] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 1.121992] pci 0000:00:1a.0: reg 10: [mem 0xf5e08000-0xf5e083ff]
[ 1.122083] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.122088] pci 0000:00:1a.0: PME# disabled
[ 1.122118] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 1.122140] pci 0000:00:1b.0: reg 10: [mem 0xf5e00000-0xf5e03fff 64bit]
[ 1.122219] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.122223] pci 0000:00:1b.0: PME# disabled
[ 1.122251] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 1.122332] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.122337] pci 0000:00:1c.0: PME# disabled
[ 1.122366] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[ 1.122446] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.122451] pci 0000:00:1c.1: PME# disabled
[ 1.122480] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
[ 1.122560] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.122565] pci 0000:00:1c.2: PME# disabled
[ 1.122598] pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
[ 1.122681] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.122686] pci 0000:00:1c.5: PME# disabled
[ 1.122723] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 1.122749] pci 0000:00:1d.0: reg 10: [mem 0xf5e07000-0xf5e073ff]
[ 1.122839] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.122844] pci 0000:00:1d.0: PME# disabled
[ 1.122869] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 1.122953] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[ 1.123075] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[ 1.123103] pci 0000:00:1f.2: reg 10: [io 0xe070-0xe077]
[ 1.123114] pci 0000:00:1f.2: reg 14: [io 0xe060-0xe063]
[ 1.123126] pci 0000:00:1f.2: reg 18: [io 0xe050-0xe057]
[ 1.123137] pci 0000:00:1f.2: reg 1c: [io 0xe040-0xe043]
[ 1.123149] pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
[ 1.123161] pci 0000:00:1f.2: reg 24: [mem 0xf5e06000-0xf5e067ff]
[ 1.123209] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.123214] pci 0000:00:1f.2: PME# disabled
[ 1.123237] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 1.123259] pci 0000:00:1f.3: reg 10: [mem 0xf5e05000-0xf5e050ff 64bit]
[ 1.123290] pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
[ 1.123360] pci 0000:01:00.0: [1002:68e0] type 0 class 0x000300
[ 1.123380] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.123394] pci 0000:01:00.0: reg 18: [mem 0xf0020000-0xf003ffff 64bit]
[ 1.123405] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 1.123424] pci 0000:01:00.0: reg 30: [mem 0xf0000000-0xf001ffff pref]
[ 1.123443] pci 0000:01:00.0: supports D1 D2
[ 1.123468] pci 0000:01:00.1: [1002:aa68] type 0 class 0x000403
[ 1.123487] pci 0000:01:00.1: reg 10: [mem 0xf0040000-0xf0043fff 64bit]
[ 1.123555] pci 0000:01:00.1: supports D1 D2
[ 1.123579] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.123582] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 1.123585] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf00fffff]
[ 1.123589] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.123667] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
[ 1.123693] pci 0000:02:00.0: reg 10: [mem 0xf4a00000-0xf4a0ffff 64bit]
[ 1.123783] pci 0000:02:00.0: supports D1
[ 1.123785] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 1.123790] pci 0000:02:00.0: PME# disabled
[ 1.123824] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.123829] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 1.123834] pci 0000:00:1c.0: bridge window [mem 0xf4a00000-0xf5dfffff]
[ 1.123842] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.123953] pci 0000:03:00.0: [1180:e822] type 0 class 0x000805
[ 1.123976] pci 0000:03:00.0: reg 10: [mem 0xf3602000-0xf36020ff]
[ 1.124115] pci 0000:03:00.0: supports D1 D2
[ 1.124117] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.124123] pci 0000:03:00.0: PME# disabled
[ 1.124175] pci 0000:03:00.1: [1180:e230] type 0 class 0x000880
[ 1.124198] pci 0000:03:00.1: reg 10: [mem 0xf3601000-0xf36010ff]
[ 1.124336] pci 0000:03:00.1: supports D1 D2
[ 1.124338] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.124344] pci 0000:03:00.1: PME# disabled
[ 1.124394] pci 0000:03:00.4: [1180:e822] type 0 class 0x000805
[ 1.124418] pci 0000:03:00.4: reg 10: [mem 0xf3600000-0xf36000ff]
[ 1.124554] pci 0000:03:00.4: supports D1 D2
[ 1.124556] pci 0000:03:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.124562] pci 0000:03:00.4: PME# disabled
[ 1.124630] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.124635] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 1.124640] pci 0000:00:1c.1: bridge window [mem 0xf3600000-0xf49fffff]
[ 1.124648] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.124886] pci 0000:04:00.0: [11ab:4381] type 0 class 0x000200
[ 1.125105] pci 0000:04:00.0: reg 10: [mem 0xf2220000-0xf2223fff 64bit]
[ 1.125212] pci 0000:04:00.0: reg 18: [io 0xa000-0xa0ff]
[ 1.125642] pci 0000:04:00.0: reg 30: [mem 0xf2200000-0xf221ffff pref]
[ 1.125967] pci 0000:04:00.0: supports D1 D2
[ 1.125968] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.126008] pci 0000:04:00.0: PME# disabled
[ 1.126269] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 1.126274] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
[ 1.126279] pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf35fffff]
[ 1.126287] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.126344] pci 0000:00:1c.5: PCI bridge to [bus 05-0c]
[ 1.126348] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
[ 1.126353] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf21fffff]
[ 1.126361] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.126438] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
[ 1.126443] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.126448] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.126456] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.126459] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.126461] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.126463] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.126466] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 1.126468] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 1.126470] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 1.126473] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 1.126475] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 1.126478] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 1.126480] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
[ 1.126515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.126656] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.126708] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 1.126765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.126833] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 1.126882] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 1.126997] \_SB_.PCI0:_OSC invalid UUID
[ 1.126998] _OSC request data:1 1f 1f
[ 1.127003] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.127035] \_SB_.PCI0:_OSC invalid UUID
[ 1.127037] _OSC request data:1 0 1d
[ 1.127041] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 1.127042] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.130982] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
[ 1.131046] pci 0000:3f:00.0: [8086:2c62] type 0 class 0x000600
[ 1.131066] pci 0000:3f:00.1: [8086:2d01] type 0 class 0x000600
[ 1.131087] pci 0000:3f:02.0: [8086:2d10] type 0 class 0x000600
[ 1.131107] pci 0000:3f:02.1: [8086:2d11] type 0 class 0x000600
[ 1.131125] pci 0000:3f:02.2: [8086:2d12] type 0 class 0x000600
[ 1.131143] pci 0000:3f:02.3: [8086:2d13] type 0 class 0x000600
[ 1.131176] pci0000:3f: Requesting ACPI _OSC control (0x1d)
[ 1.131179] pci0000:3f: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 1.131181] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.131415] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.131460] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.131503] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 7 10 12 14 15)
[ 1.131546] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 1.131588] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 1.131636] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.131679] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 1.131722] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 1.131820] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.131826] vgaarb: loaded
[ 1.131827] vgaarb: bridge control possible 0000:01:00.0
[ 1.131900] PCI: Using ACPI for IRQ routing
[ 1.134142] PCI: pci_cache_line_size set to 64 bytes
[ 1.134246] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 1.134248] reserve RAM buffer: 00000000dee74000 - 00000000dfffffff
[ 1.134372] NetLabel: Initializing
[ 1.134374] NetLabel: domain hash size = 128
[ 1.134375] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.134389] NetLabel: unlabeled traffic allowed by default
[ 1.134412] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.134418] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.136441] Switching to clocksource hpet
[ 1.139456] Switched to NOHz mode on CPU #0
[ 1.139583] Switched to NOHz mode on CPU #1
[ 1.139590] Switched to NOHz mode on CPU #2
[ 1.139598] Switched to NOHz mode on CPU #3
[ 1.142357] pnp: PnP ACPI init
[ 1.142375] ACPI: bus type pnp registered
[ 1.142679] pnp 00:00: [bus 00-3e]
[ 1.142682] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.142684] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.142686] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.142689] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.142691] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.142693] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.142695] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.142697] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.142699] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.142700] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.142702] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.142707] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.142709] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.142711] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.142713] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.142715] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.142716] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.142718] pnp 00:00: [mem 0xe0000000-0xfeafffff window]
[ 1.142826] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.142841] pnp 00:01: [io 0x0000-0x001f]
[ 1.142843] pnp 00:01: [io 0x0081-0x0091]
[ 1.142844] pnp 00:01: [io 0x0093-0x009f]
[ 1.142846] pnp 00:01: [io 0x00c0-0x00df]
[ 1.142848] pnp 00:01: [dma 4]
[ 1.142872] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.142880] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 1.142901] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.142976] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 1.142999] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.143008] pnp 00:04: [io 0x00f0]
[ 1.143019] pnp 00:04: [irq 13]
[ 1.143044] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.143054] pnp 00:05: [io 0x002e-0x002f]
[ 1.143056] pnp 00:05: [io 0x004e-0x004f]
[ 1.143057] pnp 00:05: [io 0x0061]
[ 1.143059] pnp 00:05: [io 0x0063]
[ 1.143061] pnp 00:05: [io 0x0065]
[ 1.143062] pnp 00:05: [io 0x0067]
[ 1.143064] pnp 00:05: [io 0x0070]
[ 1.143065] pnp 00:05: [io 0x0080]
[ 1.143066] pnp 00:05: [io 0x0092]
[ 1.143068] pnp 00:05: [io 0x00b2-0x00b3]
[ 1.143070] pnp 00:05: [io 0x0680-0x069f]
[ 1.143072] pnp 00:05: [io 0xff00-0xff0f]
[ 1.143073] pnp 00:05: [io 0xff10-0xff13]
[ 1.143075] pnp 00:05: [io 0x0800-0x0803]
[ 1.143076] pnp 00:05: [io 0x0400-0x047f]
[ 1.143078] pnp 00:05: [io 0x0500-0x057f]
[ 1.143080] pnp 00:05: [io 0x164e-0x164f]
[ 1.143140] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.143143] system 00:05: [io 0xff00-0xff0f] has been reserved
[ 1.143145] system 00:05: [io 0xff10-0xff13] has been reserved
[ 1.143148] system 00:05: [io 0x0800-0x0803] has been reserved
[ 1.143150] system 00:05: [io 0x0400-0x047f] has been reserved
[ 1.143152] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.143154] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.143157] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.143166] pnp 00:06: [io 0x0070-0x0077]
[ 1.143171] pnp 00:06: [irq 8]
[ 1.143208] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.143218] pnp 00:07: [io 0x0060]
[ 1.143220] pnp 00:07: [io 0x0064]
[ 1.143225] pnp 00:07: [irq 1]
[ 1.143250] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.143262] pnp 00:08: [irq 12]
[ 1.143288] pnp 00:08: Plug and Play ACPI device, IDs SNY9011 PNP0f13 (active)
[ 1.143642] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 1.143644] pnp 00:09: [mem 0xfed10000-0xfed13fff]
[ 1.143646] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[ 1.143650] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[ 1.143651] pnp 00:09: [mem 0xf8000000-0xfbffffff]
[ 1.143653] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[ 1.143655] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
[ 1.143657] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[ 1.143659] pnp 00:09: [mem 0xff000000-0xffffffff]
[ 1.143661] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[ 1.143663] pnp 00:09: [mem 0xf5e0b000-0xf5e0bfff]
[ 1.143733] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.143736] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[ 1.143739] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.143741] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.143744] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.143746] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.143749] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.143751] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.143754] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.143757] system 00:09: [mem 0xf5e0b000-0xf5e0bfff] has been reserved
[ 1.143760] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.143900] pnp 00:0a: [bus 3f]
[ 1.143951] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 1.157077] pnp: PnP ACPI: found 11 devices
[ 1.157079] ACPI: ACPI bus type pnp unregistered
[ 1.163064] PCI: max bus depth: 1 pci_try_num: 2
[ 1.163124] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf5f00000-0xf60fffff 64bit pref]
[ 1.163130] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf6100000-0xf62fffff 64bit pref]
[ 1.163135] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf6300000-0xf64fffff 64bit pref]
[ 1.163140] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf6500000-0xf66fffff 64bit pref]
[ 1.163143] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.163146] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 1.163149] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf00fffff]
[ 1.163152] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 1.163156] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.163159] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 1.163166] pci 0000:00:1c.0: bridge window [mem 0xf4a00000-0xf5dfffff]
[ 1.163171] pci 0000:00:1c.0: bridge window [mem 0xf6500000-0xf66fffff 64bit pref]
[ 1.163191] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.163195] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 1.163202] pci 0000:00:1c.1: bridge window [mem 0xf3600000-0xf49fffff]
[ 1.163207] pci 0000:00:1c.1: bridge window [mem 0xf6300000-0xf64fffff 64bit pref]
[ 1.163215] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 1.163219] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
[ 1.163225] pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf35fffff]
[ 1.163230] pci 0000:00:1c.2: bridge window [mem 0xf6100000-0xf62fffff 64bit pref]
[ 1.163238] pci 0000:00:1c.5: PCI bridge to [bus 05-0c]
[ 1.163242] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
[ 1.163248] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf21fffff]
[ 1.163253] pci 0000:00:1c.5: bridge window [mem 0xf5f00000-0xf60fffff 64bit pref]
[ 1.163262] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
[ 1.163263] pci 0000:00:1e.0: bridge window [io disabled]
[ 1.163269] pci 0000:00:1e.0: bridge window [mem disabled]
[ 1.163274] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.163293] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.163296] pci 0000:00:01.0: setting latency timer to 64
[ 1.163303] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.163308] pci 0000:00:1c.0: setting latency timer to 64
[ 1.163318] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.163323] pci 0000:00:1c.1: setting latency timer to 64
[ 1.163333] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.163338] pci 0000:00:1c.2: setting latency timer to 64
[ 1.163345] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.163350] pci 0000:00:1c.5: setting latency timer to 64
[ 1.163359] pci 0000:00:1e.0: setting latency timer to 64
[ 1.163363] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.163366] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.163368] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.163370] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.163372] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.163374] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.163376] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.163378] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 1.163380] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 1.163383] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
[ 1.163385] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 1.163387] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xf00fffff]
[ 1.163389] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 1.163391] pci_bus 0000:02: resource 1 [mem 0xf4a00000-0xf5dfffff]
[ 1.163394] pci_bus 0000:02: resource 2 [mem 0xf6500000-0xf66fffff 64bit pref]
[ 1.163396] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 1.163398] pci_bus 0000:03: resource 1 [mem 0xf3600000-0xf49fffff]
[ 1.163400] pci_bus 0000:03: resource 2 [mem 0xf6300000-0xf64fffff 64bit pref]
[ 1.163403] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
[ 1.163405] pci_bus 0000:04: resource 1 [mem 0xf2200000-0xf35fffff]
[ 1.163407] pci_bus 0000:04: resource 2 [mem 0xf6100000-0xf62fffff 64bit pref]
[ 1.163409] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
[ 1.163411] pci_bus 0000:05: resource 1 [mem 0xf0200000-0xf21fffff]
[ 1.163414] pci_bus 0000:05: resource 2 [mem 0xf5f00000-0xf60fffff 64bit pref]
[ 1.163416] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
[ 1.163418] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
[ 1.163420] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.163422] pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.163424] pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.163426] pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.163428] pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.163431] pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
[ 1.163433] pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff]
[ 1.163435] pci_bus 0000:0d: resource 13 [mem 0xe0000000-0xfeafffff]
[ 1.163511] NET: Registered protocol family 2
[ 1.163700] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.164727] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.167663] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.168014] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.168016] TCP reno registered
[ 1.168027] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.168066] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.168344] NET: Registered protocol family 1
[ 2.499376] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.832221] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.832352] pci 0000:01:00.0: Boot video device
[ 3.832384] PCI: CLS 64 bytes, default 64
[ 3.832433] Unpacking initramfs...
[ 3.861003] Freeing initrd memory: 1780k freed
[ 3.861298] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.861302] Placing 64MB software IO TLB between ffff8800dae6e000 - ffff8800dee6e000
[ 3.861304] software IO TLB at phys 0xdae6e000 - 0xdee6e000
[ 3.861787] audit: initializing netlink socket (disabled)
[ 3.861799] type=2000 audit(1313594250.696:1): initialized
[ 3.869728] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.886559] VFS: Disk quotas dquot_6.5.2
[ 3.886700] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.886869] msgmni has been set to 7638
[ 3.887107] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.887147] io scheduler noop registered
[ 3.887150] io scheduler deadline registered
[ 3.887202] io scheduler cfq registered (default)
[ 3.887320] pcieport 0000:00:01.0: setting latency timer to 64
[ 3.887348] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 3.887672] vesafb: mode is 1600x900x32, linelength=6400, pages=1
[ 3.887674] vesafb: scrolling: redraw
[ 3.887677] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 3.890141] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 11250k, total 16384k
[ 4.087472] Console: switching to colour frame buffer device 200x56
[ 4.281840] fb0: VESA VGA frame buffer device
[ 4.281854] intel_idle: MWAIT substates: 0x1120
[ 4.281856] intel_idle: v0.4 model 0x25
[ 4.281857] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 4.281902] ERST: Table is not found!
[ 4.281955] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 4.469026] Linux agpgart interface v0.103
[ 4.469114] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 4.473482] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.473514] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.473591] mousedev: PS/2 mouse device common for all mice
[ 4.473653] rtc_cmos 00:06: RTC can wake from S4
[ 4.473761] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 4.473791] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 4.473886] cpuidle: using governor ladder
[ 4.474031] cpuidle: using governor menu
[ 4.474245] TCP cubic registered
[ 4.474248] NET: Registered protocol family 17
[ 4.474257] Registering the dns_resolver key type
[ 4.474353] PM: Checking hibernation image partition /dev/sda9
[ 4.496169] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 4.502184] PM: Hibernation image not present or could not be loaded.
[ 4.502194] registered taskstats version 1
[ 4.512403] rtc_cmos 00:06: setting system clock to 2011-08-17 15:17:31 UTC (1313594251)
[ 4.512569] Initializing network drop monitor service
[ 4.516031] Freeing unused kernel memory: 712k freed
[ 4.516201] Write protecting the kernel read-only data: 6144k
[ 4.516747] Freeing unused kernel memory: 12k freed
[ 4.522858] Freeing unused kernel memory: 776k freed
[ 4.564188] udevd[93]: starting version 173
[ 4.566281] ACPI: acpi_idle yielding to intel_idle
[ 4.624591] SCSI subsystem initialized
[ 4.630767] libata version 3.00 loaded.
[ 4.632419] ahci 0000:00:1f.2: version 3.0
[ 4.632443] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.632515] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 4.632554] ahci: SSS flag set, parallel bus scan disabled
[ 4.632606] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 4.632610] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part sxs apst
[ 4.632616] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.634910] scsi0 : ahci
[ 4.635536] scsi1 : ahci
[ 4.636083] scsi2 : ahci
[ 4.636721] scsi3 : ahci
[ 4.637168] scsi4 : ahci
[ 4.637475] scsi5 : ahci
[ 4.637727] ata1: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06100 irq 41
[ 4.637731] ata2: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06180 irq 41
[ 4.637733] ata3: DUMMY
[ 4.637734] ata4: DUMMY
[ 4.637737] ata5: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06300 irq 41
[ 4.637741] ata6: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06380 irq 41
[ 4.861932] Refined TSC clocksource calibration: 2128.123 MHz.
[ 4.861939] Switching to clocksource tsc
[ 4.955224] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.965120] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 4.965397] ata1.00: ATA-8: SAMSUNG HM500JI, 2AC101C4, max UDMA/133
[ 4.965402] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.975403] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 4.975693] ata1.00: configured for UDMA/133
[ 4.976014] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM500JI 2AC1 PQ: 0 ANSI: 5
[ 5.295101] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.296935] ata2.00: ATAPI: Optiarc DVD RW AD-7700H, 1.V0, max UDMA/100
[ 5.303748] ata2.00: configured for UDMA/100
[ 5.319899] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7700H 1.V0 PQ: 0 ANSI: 5
[ 5.638306] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.958189] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.964558] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.964596] sd 0:0:0:0: [sda] Write Protect is off
[ 5.964599] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.964614] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.073618] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 6.074200] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.091859] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.091865] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.092089] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 7.960526] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 9.667393] udevd[273]: starting version 173
[ 10.439749] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 10.447052] ACPI: Lid Switch [LID0]
[ 10.449942] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 10.449952] ACPI: Power Button [PWRB]
[ 10.463109] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS
[ 10.484243] acpi device:4b: registered as cooling_device4
[ 10.484911] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4a/LNXVIDEO:01/input/input3
[ 10.484921] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 10.494126] thermal LNXTHERM:00: registered as thermal_zone0
[ 10.494129] ACPI: Thermal Zone [TZ00] (58 C)
[ 10.506259] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 10.506267] ACPI: Battery Slot [BAT0] (battery present)
[ 10.517446] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 10.524583] thermal LNXTHERM:01: registered as thermal_zone1
[ 10.524586] ACPI: Thermal Zone [TZ01] (58 C)
[ 10.530700] ACPI: AC Adapter [ADP1] (off-line)
[ 10.648271] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 10.773153] iTCO_vendor_support: vendor-support=0
[ 10.924548] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 10.924706] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[ 10.924868] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.926971] sky2: driver version 1.28
[ 10.927036] sky2 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.927049] sky2 0000:04:00.0: setting latency timer to 64
[ 10.927089] sky2 0000:04:00.0: Yukon-2 Optima chip revision 1
[ 10.927203] sky2 0000:04:00.0: irq 42 for MSI/MSI-X
[ 10.927532] sky2 0000:04:00.0: eth0: addr 54:42:49:10:6d:46
[ 11.021491] cfg80211: Calling CRDA to update world regulatory domain
[ 11.030984] usbcore: registered new interface driver usbfs
[ 11.031163] usbcore: registered new interface driver hub
[ 11.031208] usbcore: registered new device driver usb
[ 11.054022] sony_laptop: Sony Notebook Control Driver v0.6
[ 11.064072] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/SNY5001:00/input/input5
[ 11.064128] input: Sony Vaio Jogdial as /devices/virtual/input/input6
[ 11.064240] sony_laptop: brightness ignored, must be controlled by ACPI video driver
[ 11.268875] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 11.269169] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.269177] mei 0000:00:16.0: setting latency timer to 64
[ 11.304449] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 11.319698] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 11.319743] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 11.354358] sdhci: Secure Digital Host Controller Interface driver
[ 11.354362] sdhci: Copyright(c) Pierre Ossman
[ 11.374472] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 11.374519] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.374559] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 11.374564] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 11.374590] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 11.374630] ehci_hcd 0000:00:1a.0: debug port 2
[ 11.378526] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 11.378534] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf5e08000
[ 11.389468] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 11.389714] hub 1-0:1.0: USB hub found
[ 11.389721] hub 1-0:1.0: 2 ports detected
[ 11.389823] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 11.389872] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 11.389877] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 11.389894] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 11.389929] ehci_hcd 0000:00:1d.0: debug port 2
[ 11.393814] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 11.393838] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf5e07000
[ 11.406179] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 11.406377] hub 2-0:1.0: USB hub found
[ 11.406382] hub 2-0:1.0: 2 ports detected
[ 11.514999] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 0)
[ 11.515023] sdhci-pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 11.515072] sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 11.515081] sdhci-pci 0000:03:00.0: setting latency timer to 64
[ 11.515108] _regulator_get: 0000:03:00.0 supply vmmc not found, using dummy regulator
[ 11.515145] Registered led device: mmc0::
[ 11.515206] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
[ 11.515222] sdhci-pci 0000:03:00.4: SDHCI controller found [1180:e822] (rev 0)
[ 11.515237] sdhci-pci 0000:03:00.4: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 11.515253] sdhci-pci 0000:03:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
[ 11.515261] sdhci-pci 0000:03:00.4: setting latency timer to 64
[ 11.515278] _regulator_get: 0000:03:00.4 supply vmmc not found, using dummy regulator
[ 11.515308] Registered led device: mmc1::
[ 11.515344] mmc1: SDHCI controller on PCI [0000:03:00.4] using DMA
[ 11.696095] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 11.800486] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input7
[ 11.823379] hub 1-1:1.0: USB hub found
[ 11.823555] hub 1-1:1.0: 6 ports detected
[ 11.881300] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.881313] ath9k 0000:02:00.0: setting latency timer to 64
[ 11.899363] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 11.899454] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 11.899494] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.929270] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 11.931327] ath: EEPROM regdomain: 0x65
[ 11.931329] ath: EEPROM indicates we should expect a direct regpair map
[ 11.931333] ath: Country alpha2 being used: 00
[ 11.931334] ath: Regpair used: 0x65
[ 12.053537] hub 2-1:1.0: USB hub found
[ 12.053638] hub 2-1:1.0: 8 ports detected
[ 12.058338] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 12.058344] Disabling lock debugging due to kernel taint
[ 12.089898] [fglrx] Maximum main memory to use for locked dma buffers: 3660 MBytes.
[ 12.090143] [fglrx] vendor: 1002 device: 68e0 count: 1
[ 12.090556] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
[ 12.090572] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.090577] pci 0000:01:00.0: setting latency timer to 64
[ 12.090779] [fglrx] Kernel PAT support is enabled
[ 12.090802] [fglrx] module loaded - fglrx 8.87.5 [Jul 7 2011] with 1 minors
[ 12.101099] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 12.101452] Registered led device: ath9k-phy0
[ 12.101460] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90005d00000, irq=16
[ 12.115758] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 12.117699] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 12.117756] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 12.117877] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 12.117956] HDA Intel 0000:01:00.1: irq 44 for MSI/MSI-X
[ 12.117979] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 12.132761] usb 1-1.2: new full speed USB device number 3 using ehci_hcd
[ 12.168259] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 12.168639] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 12.265962] usb 1-1.2: new high speed USB device number 4 using ehci_hcd
[ 12.387463] cfg80211: World regulatory domain updated:
[ 12.387466] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.387469] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.387472] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.387474] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.387477] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.387479] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.387493] cfg80211: Calling CRDA for country: IT
[ 12.390329] cfg80211: Regulatory domain changed to country: IT
[ 12.390332] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.390334] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 12.390337] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 12.390339] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 12.390341] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 12.462672] usb 2-1.2: new low speed USB device number 3 using ehci_hcd
[ 12.939879] Linux media interface: v0.10
[ 12.994380] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input12
[ 12.994487] generic-usb 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[ 12.994502] usbcore: registered new interface driver usbhid
[ 12.994504] usbhid: USB HID core driver
[ 13.030968] Linux video capture interface: v2.00
[ 13.053392] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (064e:a213)
[ 13.060994] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input13
[ 13.061057] usbcore: registered new interface driver uvcvideo
[ 13.061059] USB Video Class driver (v1.1.0)
[ 15.202804] EXT4-fs (sda7): re-mounted. Opts: (null)
[ 15.503756] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 15.505206] SGI XFS Quota Management subsystem
[ 15.527846] XFS (sda10): Mounting Filesystem
[ 16.058466] XFS (sda10): Ending clean mount
[ 16.172238] REISERFS (device sda8): found reiserfs format "3.6" with standard journal
[ 16.172257] REISERFS (device sda8): using ordered data mode
[ 16.180082] REISERFS (device sda8): journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 16.180470] REISERFS (device sda8): checking transaction log (sda8)
[ 16.225092] REISERFS (device sda8): Using r5 hash to sort names
[ 16.362086] EXT3-fs: barriers not enabled
[ 16.377355] kjournald starting. Commit interval 5 seconds
[ 16.377554] EXT3-fs (sda6): using internal journal
[ 16.377560] EXT3-fs (sda6): mounted filesystem with ordered data mode
[ 16.475339] fuse init (API version 7.16)
[ 17.345752] Adding 1052220k swap on /dev/sda9. Priority:-1 extents:1 across:1052220k
Last edited by TheImmortalPhoenix (2011-08-17 13:23:54) -
Kernel panics with attached Drobo after upgrade to 10.6.4
Hi all,
I have the original four-bay Drobo, attached to a Mac Pro via USB. The Drobo Dashboard reports that both it and the Drobo's firmware are up-to-date with the latest versions.
The Drobo worked happily for several months attached to the Mac Pro running OS 10.6.3 and lower. However, after upgrading to 10.6.4, the machine will sporadically (though consistently) kernel panic. I have determined that the problem is with the Drobo — if the Drobo is physically unattached, the machine does not kernel panic; once attached, it will kernel panic, often within 10 minutes.
Does anyone have any ideas how I can resolve this problem?
Thanks so much in advance.I have a DroboPro here, and I also started experiencing this problem when I upgraded to 10.6.4. When connected via iSCSI, my machine would panic within a day or two, and sometimes much quicker than that.
I tried working around the problem by switching the Drobo over to USB. While that did prevent the panics in the iSCSI kernel extension, I started seeing corruption in my video output after a couple of days, so I was still forced to reboot every other day to keep the machine usable.
Even with the Drobo disconnected, I still saw the video corruption problem, but after I uninstalled the Drobo Dashboard completely, the problem has gone away. Thankfully, I can still use the Drobo via USB even without that installed, but the performance is dramatically lower than what I got with iSCSI.
If anyone has a better solution, I would very much appreciate hearing about it! -
Kernel error on startx after upgrade to kernel 3.0
After upgrading i can no longer start X. The screen turns black and the computer does not respond to input, I am however able to login using ssh.
The system is a intel atom cpu and nvidia ion gpu using the nvidia driver.
I'll be thankfull for any help.
The output from dmesg is
[ 179.200661] BUG: unable to handle kernel paging request at ffffffffa027d738
[ 179.200674] IP: [<ffffffff8122104b>] strnlen+0xb/0x30
[ 179.200689] PGD 1695067 PUD 1699063 PMD 5baf2067 PTE 0
[ 179.200700] Oops: 0000 [#1] PREEMPT SMP
[ 179.200710] CPU 1
[ 179.200713] Modules linked in: appletalk ipx p8022 psnap llc p8023 ipv6 fuse ext2 nvidia(P) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm joydev evdev shpchp snd_timer snd soundcore snd_page_alloc forcedeth pci_hotplug i2c_nforce2 psmouse serio_raw pcspkr i2c_core wmi button processor autofs4 lirc_dev ext4 mbcache jbd2 crc16 hid_logitech ff_memless usbhid hid sg sr_mod cdrom sd_mod ata_generic pata_acpi ohci_hcd ahci libahci libata ehci_hcd scsi_mod usbcore
[ 179.200798]
[ 179.200804] Pid: 1029, comm: X Tainted: P C 3.0-ARCH #1 To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M.
[ 179.200816] RIP: 0010:[<ffffffff8122104b>] [<ffffffff8122104b>] strnlen+0xb/0x30
[ 179.200827] RSP: 0018:ffff88002f549c98 EFLAGS: 00010086
[ 179.200832] RAX: 0000000000000000 RBX: ffff88005c2590bf RCX: 0000000000000000
[ 179.200838] RDX: ffffffffa027d738 RSI: ffffffffffffffff RDI: ffffffffa027d738
[ 179.200844] RBP: ffff88002f549c98 R08: 000000000000ffff R09: 000000000000ffff
[ 179.200850] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa027d738
[ 179.200855] R13: ffff88005c25a000 R14: 0000000000000000 R15: 000000000000ffff
[ 179.200862] FS: 00007f1fe8c2a880(0000) GS:ffff88005fc80000(0000) knlGS:0000000000000000
[ 179.200869] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 179.200874] CR2: ffffffffa027d738 CR3: 000000002f57c000 CR4: 00000000000006e0
[ 179.200880] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 179.200886] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 179.200892] Process X (pid: 1029, threadinfo ffff88002f548000, task ffff88005c3fa3f0)
[ 179.200897] Stack:
[ 179.200901] ffff88002f549cd8 ffffffff812232de 0000000000000000 ffff88005c2590bf
[ 179.200913] ffffffff814d27cd ffff88002f549d70 ffffffff814d27cd ffff88005c25a000
[ 179.200924] ffff88002f549d58 ffffffff81224389 000000002f54ffff 0000000000000000
[ 179.200934] Call Trace:
[ 179.200946] [<ffffffff812232de>] string.isra.5+0x3e/0xd0
[ 179.200955] [<ffffffff81224389>] vsnprintf+0x219/0x620
[ 179.200966] [<ffffffff81178c98>] seq_printf+0x58/0x90
[ 179.200980] [<ffffffff810c35ab>] show_interrupts+0x25b/0x310
[ 179.200989] [<ffffffff8117906e>] seq_read+0x29e/0x3d0
[ 179.200998] [<ffffffff81178dd0>] ? seq_lseek+0x100/0x100
[ 179.201006] [<ffffffff811b1fb3>] proc_reg_read+0x83/0xc0
[ 179.201016] [<ffffffff8115793c>] vfs_read+0xac/0x180
[ 179.201023] [<ffffffff81157a5a>] sys_read+0x4a/0x90
[ 179.201033] [<ffffffff813f4402>] system_call_fastpath+0x16/0x1b
[ 179.201039] Code: 31 c0 80 3f 00 55 48 89 e5 74 11 48 89 f8 66 90 48 83 c0 01 80 38 00 75 f7 48 29 f8 5d c3 66 90 55 31 c0 48 85 f6 48 89 e5 74 23
[ 179.201091] 3f 00 74 1e 48 89 f8 eb 0c 0f 1f 00 48 83 ee 01 80 38 00 74
[ 179.201117] RIP [<ffffffff8122104b>] strnlen+0xb/0x30
[ 179.201126] RSP <ffff88002f549c98>
[ 179.201130] CR2: ffffffffa027d738
[ 179.201136] ---[ end trace 700eca34042d7ef4 ]---
[ 179.201144] note: X[1029] exited with preempt_count 1
[ 179.204777] BUG: scheduling while atomic: X/1029/0x10000002
[ 179.204789] Modules linked in: appletalk ipx p8022 psnap llc p8023 ipv6 fuse ext2 nvidia(P) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm joydev evdev shpchp snd_timer snd soundcore snd_page_alloc forcedeth pci_hotplug i2c_nforce2 psmouse serio_raw pcspkr i2c_core wmi button processor autofs4 lirc_dev ext4 mbcache jbd2 crc16 hid_logitech ff_memless usbhid hid sg sr_mod cdrom sd_mod ata_generic pata_acpi ohci_hcd ahci libahci libata ehci_hcd scsi_mod usbcore
[ 179.204946] Pid: 1029, comm: X Tainted: P D C 3.0-ARCH #1
[ 179.204955] Call Trace:
[ 179.204979] [<ffffffff813ea533>] __schedule_bug+0x5f/0x64
[ 179.204994] [<ffffffff813f09e1>] schedule+0x831/0x9f0
[ 179.205009] [<ffffffff813f39a2>] ? tty_unlock+0x32/0x50
[ 179.205026] [<ffffffff8116d7ac>] ? d_free+0x4c/0x70
[ 179.205041] [<ffffffff81174c0d>] ? vfsmount_lock_local_unlock+0x3d/0x50
[ 179.205056] [<ffffffff81175db0>] ? mntput_no_expire+0x30/0xe0
[ 179.205069] [<ffffffff81175e7f>] ? mntput+0x1f/0x30
[ 179.205083] [<ffffffff8115925f>] ? fput+0x16f/0x210
[ 179.205098] [<ffffffff8105351a>] __cond_resched+0x2a/0x40
[ 179.205111] [<ffffffff813f0e22>] _cond_resched+0x32/0x40
[ 179.205126] [<ffffffff81060005>] put_files_struct+0xa5/0x110
[ 179.205140] [<ffffffff81060132>] exit_files+0x52/0x60
[ 179.205153] [<ffffffff8106063a>] do_exit+0x18a/0x8f0
[ 179.205167] [<ffffffff8105e441>] ? kmsg_dump+0xb1/0xe0
[ 179.205183] [<ffffffff8100f35a>] oops_end+0xaa/0xf0
[ 179.205210] [<ffffffff813ea099>] no_context+0x209/0x218
[ 179.205231] [<ffffffff813ea236>] __bad_area_nosemaphore+0x18e/0x1b1
[ 179.205245] [<ffffffff813f0e76>] ? preempt_schedule+0x46/0x60
[ 179.205259] [<ffffffff813f34f0>] ? _raw_spin_unlock_irqrestore+0x10/0x40
[ 179.205279] [<ffffffff813ea26c>] bad_area_nosemaphore+0x13/0x15
[ 179.205294] [<ffffffff81039b1c>] do_page_fault+0x3ec/0x4d0
[ 179.205310] [<ffffffff81317ca3>] ? pci_conf1_read+0xc3/0x120
[ 179.205327] [<ffffffff8108292f>] ? __mutex_init+0x2f/0x40
[ 179.205341] [<ffffffff81171103>] ? inode_init_always+0x113/0x1d0
[ 179.205355] [<ffffffff811b17ff>] ? proc_alloc_inode+0x6f/0xb0
[ 179.205369] [<ffffffff8107f247>] ? bit_waitqueue+0x17/0xd0
[ 179.205389] [<ffffffff813f3e45>] page_fault+0x25/0x30
[ 179.205417] [<ffffffff8122104b>] ? strnlen+0xb/0x30
[ 179.205431] [<ffffffff813f217e>] ? mutex_unlock+0xe/0x10
[ 179.205444] [<ffffffff812232de>] string.isra.5+0x3e/0xd0
[ 179.205458] [<ffffffff81224389>] vsnprintf+0x219/0x620
[ 179.205474] [<ffffffff81178c98>] seq_printf+0x58/0x90
[ 179.205494] [<ffffffff810c35ab>] show_interrupts+0x25b/0x310
[ 179.205510] [<ffffffff8117906e>] seq_read+0x29e/0x3d0
[ 179.205525] [<ffffffff81178dd0>] ? seq_lseek+0x100/0x100
[ 179.205539] [<ffffffff811b1fb3>] proc_reg_read+0x83/0xc0
[ 179.205552] [<ffffffff8115793c>] vfs_read+0xac/0x180
[ 179.205566] [<ffffffff81157a5a>] sys_read+0x4a/0x90
[ 179.205581] [<ffffffff813f4402>] system_call_fastpath+0x16/0x1b
[ 179.205823] BUG: scheduling while atomic: X/1029/0x10000002
[ 179.205832] Modules linked in: appletalk ipx p8022 psnap llc p8023 ipv6 fuse ext2 nvidia(P) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm joydev evdev shpchp snd_timer snd soundcore snd_page_alloc forcedeth pci_hotplug i2c_nforce2 psmouse serio_raw pcspkr i2c_core wmi button processor autofs4 lirc_dev ext4 mbcache jbd2 crc16 hid_logitech ff_memless usbhid hid sg sr_mod cdrom sd_mod ata_generic pata_acpi ohci_hcd ahci libahci libata ehci_hcd scsi_mod usbcore
[ 179.205988] Pid: 1029, comm: X Tainted: P D C 3.0-ARCH #1
[ 179.205996] Call Trace:
[ 179.206016] [<ffffffff813ea533>] __schedule_bug+0x5f/0x64
[ 179.206031] [<ffffffff813f09e1>] schedule+0x831/0x9f0
[ 179.206052] [<ffffffff81099cf5>] ? module_put+0x115/0x130
[ 179.206067] [<ffffffff81174c0d>] ? vfsmount_lock_local_unlock+0x3d/0x50
[ 179.206082] [<ffffffff81175db0>] ? mntput_no_expire+0x30/0xe0
[ 179.206096] [<ffffffff81175e7f>] ? mntput+0x1f/0x30
[ 179.206110] [<ffffffff8115925f>] ? fput+0x16f/0x210
[ 179.206125] [<ffffffff8105351a>] __cond_resched+0x2a/0x40
[ 179.206137] [<ffffffff813f0e22>] _cond_resched+0x32/0x40
[ 179.206151] [<ffffffff81060005>] put_files_struct+0xa5/0x110
[ 179.206163] [<ffffffff81060132>] exit_files+0x52/0x60
[ 179.206174] [<ffffffff8106063a>] do_exit+0x18a/0x8f0
[ 179.206186] [<ffffffff8105e441>] ? kmsg_dump+0xb1/0xe0
[ 179.206202] [<ffffffff8100f35a>] oops_end+0xaa/0xf0
[ 179.206227] [<ffffffff813ea099>] no_context+0x209/0x218
[ 179.206248] [<ffffffff813ea236>] __bad_area_nosemaphore+0x18e/0x1b1
[ 179.206262] [<ffffffff813f0e76>] ? preempt_schedule+0x46/0x60
[ 179.206277] [<ffffffff813f34f0>] ? _raw_spin_unlock_irqrestore+0x10/0x40
[ 179.206297] [<ffffffff813ea26c>] bad_area_nosemaphore+0x13/0x15
[ 179.206312] [<ffffffff81039b1c>] do_page_fault+0x3ec/0x4d0
[ 179.206328] [<ffffffff81317ca3>] ? pci_conf1_read+0xc3/0x120
[ 179.206345] [<ffffffff8108292f>] ? __mutex_init+0x2f/0x40
[ 179.206359] [<ffffffff81171103>] ? inode_init_always+0x113/0x1d0
[ 179.206373] [<ffffffff811b17ff>] ? proc_alloc_inode+0x6f/0xb0
[ 179.206387] [<ffffffff8107f247>] ? bit_waitqueue+0x17/0xd0
[ 179.206407] [<ffffffff813f3e45>] page_fault+0x25/0x30
[ 179.206434] [<ffffffff8122104b>] ? strnlen+0xb/0x30
[ 179.206448] [<ffffffff813f217e>] ? mutex_unlock+0xe/0x10
[ 179.206462] [<ffffffff812232de>] string.isra.5+0x3e/0xd0
[ 179.206477] [<ffffffff81224389>] vsnprintf+0x219/0x620
[ 179.206494] [<ffffffff81178c98>] seq_printf+0x58/0x90
[ 179.206514] [<ffffffff810c35ab>] show_interrupts+0x25b/0x310
[ 179.206529] [<ffffffff8117906e>] seq_read+0x29e/0x3d0
[ 179.206544] [<ffffffff81178dd0>] ? seq_lseek+0x100/0x100
[ 179.206558] [<ffffffff811b1fb3>] proc_reg_read+0x83/0xc0
[ 179.206573] [<ffffffff8115793c>] vfs_read+0xac/0x180
[ 179.206586] [<ffffffff81157a5a>] sys_read+0x4a/0x90
[ 179.206601] [<ffffffff813f4402>] system_call_fastpath+0x16/0x1b
[ 179.207627] NVRM: os_flush_work_queue: attempted to execute passivework from an atomic or interrupt context.
[ 179.229435] NVRM: VM: nv_kern_close:2097: 0xffff88005bfd40c0, 11 page(s), count = 1, flags = 0x00000011, 0x000000005b0fd000, 0xffff88005bfd42a0
Edit: Downgraded to kernel26-2.6.39.1-1-x86_64.pkg.tar.xz nvidia-275.09.07-1-x86_64.pkg.tar.xz nvidia-utils-275.09.07-1-x86_64.pkg.tar.xz lirc-1\:0.9.0-4-x86_64.pkg.tar.xz and things work again.
Last edited by eirikst (2011-08-28 16:19:44)The A-GPS needs to have direct line of sight to a satellite such as when standing outside or mounted on the dash of an automobile. If indoors the A-GPS will use triangulation with the nearest three cellular towers to pinpoint your approximate location. I haven't had any issue using A-GPS while driving or walking with Google Maps. As for third party apps this has nothing to do with Apple and the 3.0 firmware but does have to do with the developers of those third party apps you're having problems with. Suggest contacting the developer of said apps through the iTunes app store feedback link for each app. This way if the app isn't updated in a timely manner Apple will pull it from the app store until the developer can provide an update for their customers such as yourself. It's sort of like running OS X or Windows on your desktop where you wouldn't file a complaint to Apple (OS X) or Microsoft (Windows) when one of your third party applications starts experiencing issues.
-
[S]Systemd can't start Load Kernel Modules after upgrade to Linux 4.0
After upgrading from linux 3.19.3-3 to 4.0.1-1 I've been having a bit of an issue. At that same time I upgraded readline (6.3.006-1 → 6.3.008-1), linux-firmware (20150206.17657c3-1 → 20150410.ec89525-1), nvidia (349.16-1 → 349.16-2) , wpa_suplican (2.4-1 → 1:2.3-1), and arpack (3.1.5-1 → 3.2.0-1). There may be some typos there since I'm copying by hand. Normally this wouldn't be much of a problem because I have been, priory to a few weeks ago, really good about back ups and would just roll my OS back 15 minutes. But things like that tend to fly out the window when the semester gets heavy. My last snapshot was on May 22nd, which I could still use, but would rather not. Also, it seems like a good idea to try to actual fix things for a change.
[edit] I should mention that this upgrade was run April 30th.[/edit]
When I finished booting the system after the upgrade, I got an error message during boot “systemd[1]: Failed to start Load Kernel Modules.” When it finished booting I run “dmesg -l err” to confirm that I'm not having a bad day dream or something. I'm also still seeing the errors that I described in this thread. Don't know if the two are related. I also noticed, when I was logging in, that it said that my stystem was still using the old kernel. Indeed, according to “uname -r” I'm still using 3.19.3-3-ARCH.
The closest thing to experience I have with this is when I forget to mount /boot before upgrading linux, so I made sure /boot was mounted and rand “sudo pacman -S linux” to reinstall, but this didn't help. Just to check I ran “ls /lib/modules” and see the directorys “4.0.1-1-ARCH” and “extramodules-4.0-ARCH” as I would expect after a succesful upgrade of the kernel.
Running “systemctl –failed, shows that in addition to systemd-modules-load.service, lm_sensors.service has also failed. I somehow expect lm_sensors depends on systemd-modules-load. I tried “systemctl restart systemd-modules-load”, but was rewarded with a message telling me that it failed. The “journalctl -xe” log has the lines
systemd[1]: system-modules-load[1799]: Failed to look up alias 'sg': Function not implemented
systemd[1]: system-modules-load[1799]: Failed to look up alias 'nfs': Function not implemented
Looking at the Wiki for Systemd under troubleshooting it actually has an example of trying to work through this exact issue. Following that I tried
journalctl _PID=1799
systemd[1]: system-modules-load[1799]: Failed to look up alias 'sg': Function not implemented
systemd[1]: system-modules-load[1799]: Failed to look up alias 'nfs': Function not implemented
which I already mentioned. At this point that bit of the Wiki stopped being useful.
Looking up on Google Failed to look up alias 'nfs': Function not implemented returned this thread from two years ago. Running “lsmod |grep sg” or $lsmod |grep nfs” returns nothing, but it also returns nothing on this laptop I'm using as well, so I don't imagine that is useful. Also, “# grep nfs /lib/modules/4.0.1-1-ARCH/modules.alias” returns a “Nosuch file or directory” error.
Searching for something on 'sg' turned up https://bbs.archlinux.org/viewtopic.php?id=165361, which was also not useful.
As a sort of last resort I tried https://wiki.archlinux.org/index.php/Do … the_kernel
I reboot and boot into my fallback installation, running 3.19.3-3, mount the partition with my main Arch on it, and arch-chroot into it.
I downgraded linux, and nvidia, exited chroot, and rebooted hoping to the Great Bacon that I didn't do anything too damaging. After all, my back ups are more than a week out of date.
This worked. I'm still getting those annyoing (they are only annoying right?) error messages I mentioned earlier. My system seems fine, if somewhat out of date.
Still, the question remains, “why did that happen, and how do I actually fix it?”
[edit2=solution]
There were two problems. First, my grub.cfg entry was pointing to the wrong UUID. I fixed this by regenerating it. Then I noticed the UUID in the grub menu itself (during the boot prosses) did not match what was in grub.cfg. To fix this I reinstalled grub.
Last edited by nstgc (2015-05-05 12:07:30)Well, I took snapshots, not back ups but they work well enough for this, and rsynced /boot/ to where it use to be, moved/renamed the subvolume boot, and commented out the appropriate line in fstab. I also deleted that other /boot from before. I unmount /boot, and regenerate my grub.cfg. If my machine still boots, I'll try for an upgrade.
grub.cfg now looks like
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
font="/arch/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
echo 'Loading Linux linux ...'
linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
echo 'Loading initial ramdisk ...'
initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux.img
submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
echo 'Loading Linux linux ...'
linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
echo 'Loading initial ramdisk ...'
initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux.img
menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
echo 'Loading Linux linux ...'
linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
echo 'Loading initial ramdisk ...'
initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Vista (loader) (on /dev/sdd2)' --class windows --class os $menuentry_id_option 'osprober-chain-30F403F0F403B75E' {
insmod part_gpt
insmod ntfs
set root='hd3,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt2 --hint-efi=hd3,gpt2 --hint-baremetal=ahci3,gpt2 30F403F0F403B75E
else
search --no-floppy --fs-uuid --set=root 30F403F0F403B75E
fi
chainloader +1
menuentry 'Windows Vista (loader) (on /dev/sdd4)' --class windows --class os $menuentry_id_option 'osprober-chain-FE2648382647EFE7' {
insmod part_gpt
insmod ntfs
set root='hd3,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt4 --hint-efi=hd3,gpt4 --hint-baremetal=ahci3,gpt4 FE2648382647EFE7
else
search --no-floppy --fs-uuid --set=root FE2648382647EFE7
fi
chainloader +1
menuentry 'Arch (on /dev/sdd5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
insmod part_gpt
insmod ext2
set root='hd3,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt5 --hint-efi=hd3,gpt5 --hint-baremetal=ahci3,gpt5 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
else
search --no-floppy --fs-uuid --set=root 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
fi
linux /boot/vmlinuz-linux root=/dev/sdd5
initrd /boot/initramfs-linux.img
submenu 'Advanced options for Arch (on /dev/sdd5)' $menuentry_id_option 'osprober-gnulinux-advanced-832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
menuentry 'Arch (on /dev/sdd5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-linux--832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
insmod part_gpt
insmod ext2
set root='hd3,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt5 --hint-efi=hd3,gpt5 --hint-baremetal=ahci3,gpt5 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
else
search --no-floppy --fs-uuid --set=root 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
fi
linux /boot/vmlinuz-linux root=/dev/sdd5
initrd /boot/initramfs-linux.img
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
if [ "${grub_platform}" == "pc" ]; then
menuentry "Memory Tester (memtest86+)" --class memtest86 --class gnu --class tool {
search --fs-uuid --no-floppy --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
linux16 /arch/boot/memtest86+/memtest.bin
fi
### END /etc/grub.d/60_memtest86+ ###
It seems as if the lines you mentioned, Scimmia, have changed. I'll take that as a good sign.
[edit] System still boots. Trying for the upgrade.
[edit2] Still can't use Linux 4.0. I'm getting the same errors as before.
[edit3] Successfully downgraded.
[edit4] I looked through /etc/mkinitcpio.conf and there isn't anything in there that isn't in my laptop's. I don't know if this will help, but here is the output of "pacman -Q"
a52dec 0.7.4-8
aalib 1.4rc5-10
abs 2.4.4-2
accountsservice 0.6.40-1
acl 2.2.52-2
adobe-source-han-sans-jp-fonts 1.002-1
adwaita-icon-theme 3.16.0-1
alsa-lib 1.0.29-1
alsa-plugins 1.0.29-2
alsa-utils 1.0.29-1
alsi 0.4.7-1
arch-install-scripts 15-1
arch-wiki-docs 20150219-1
arch-wiki-lite 20150219-2
archlinux-keyring 20150212-1
arpack 3.2.0-1
aspell 0.60.6.1-2
asunder 2.7-1
at-spi2-atk 2.16.0-1
at-spi2-core 2.16.0-1
atk 2.16.0-1
atkmm 2.22.7-1
attr 2.4.47-1
autoconf 2.69-2
automake 1.15-1
avahi 0.6.31-15
awesome 3.5.6-1
bash 4.3.033-1
bash-completion 2.1-5
bc 1.06.95-1
bcache-tools 1.0.8-1
bigpkg 0.4.0-2
binutils 2.25-2
bison 3.0.4-1
blas 3.5.0-1
bluez 5.30-1
bluez-libs 5.30-1
bonnie++ 1.97-1
boost 1.58.0-1
boost-libs 1.58.0-1
btrfs-progs 3.19.1-1
bullet 2.82-1
bzip2 1.0.6-5
ca-certificates 20150402-1
ca-certificates-cacert 20140824-2
ca-certificates-mozilla 3.18-3
ca-certificates-utils 20150402-1
cabextract 1.4-3
cairo 1.14.2-1
cairo-clock 0.3.4-4
cairo-dock 3.4.1-1
cairo-dock-plug-ins 3.4.1-1
cairomm 1.10.0-3
calibre 2.27.0-1
cantarell-fonts 0.0.16-2
caribou 0.4.18.1-1
cddb-py 1.4-7
cdparanoia 10.2-5
cdrdao 1.2.3-7
cdrtools 3.01a28-1
celt 0.11.3-2
cfv 1.18.3-6
cheese 3.16.1-1
chmlib 0.40-4
chromaprint 1.1-2
chromium 42.0.2311.135-1
chromium-pepper-flash 1:17.0.0.169-3
cifs-utils 6.4-1
cinnamon-desktop 2.4.2-1
cinnamon-translations 2.4.4-1
clementine 1.2.3-5
clucene 2.3.3.4-8
clutter 1.22.0-2
clutter-gst2 2.0.14-1
clutter-gtk 1.6.0-2
cmus 2.6.0-4
cogl 1.20.0-1
colord 1.2.9-2
colord-gtk 0.1.26-2
compositeproto 0.4.2-3
confuse 2.7-3
coreutils 8.23-1
cracklib 2.9.4-1
cryptsetup 1.6.6-1
cups 2.0.2-4
cups-filters 1.0.68-1
cups-pk-helper 0.2.5-1
curl 7.42.0-1
damageproto 1.2.1-3
db 5.3.28-2
dbus 1.8.16-2
dbus-glib 0.102-2
dconf 0.24.0-1
desktop-file-utils 0.22-1
device-mapper 2.02.116-1
dhclient 4.3.2-1
dhcpcd 6.8.1-1
dia 0.97.3-1
dialog 1:1.2_20150225-1
dictd 1.12.1-4
diffutils 3.3-2
ding-libs 0.4.0-3
djvulibre 3.5.27-1
dnssec-anchors 20150403-1
dotconf 1.3-4
dri2proto 2.8-2
dri3proto 1.0-1
dvd+rw-tools 7.1-5
dvdisaster 0.72.6-1
e2fsprogs 1.42.12-2
ecryptfs-utils 106-1
ed 1.11-1
efl 1.13.2-1
elementary 1.13.2-1
elfutils 0.161-3
enca 1.16-1
enchant 1.6.0-5
enlightenment 0.19.4-1
evas_generic_loaders 1.13.2-1
evince 3.16.0-1
exempi 2.2.2-1
exfat-utils 1.1.1-1
exif-py 1.2.0-1
exiv2 0.24-1
expac 4-3
expat 2.1.0-4
extcalc 0.9.3_1-3
faac 1.28-5
faad2 2.7-4
fakeroot 1.20.2-1
fbreader 0.99.4-4
ffmpeg 1:2.6.2-1
fftw 3.3.4-1
file 5.22-1
file-roller 3.16.1-1
filesystem 2015.02-1
findutils 4.4.2-6
firefox 37.0.2-1
fixesproto 5.0-3
flac 1.3.1-1
flashplugin 11.2.202.457-1
flex 2.5.39-1
fltk 1.3.3-4
fluidsynth 1.1.6-4
fontconfig 2.11.1-1
fontsproto 2.1.3-1
foomatic-db 3:20150308-1
foomatic-db-engine 3:20150308-1
freetype2 2.5.5-1
fribidi 0.19.6-2
fsarchiver 0.6.19-1
fuse 2.9.3-2
fuse-exfat 1.1.0-1
gawk 4.1.2-1
gc 7.4.2-2
gcc-fortran 4.9.2-4
gcc-libs-multilib 4.9.2-4
gcc-multilib 4.9.2-4
gconf 3.2.6-3
gcr 3.15.92-1
gd 2.1.1-2
gdb 7.9-1
gdbm 1.11-1
gdk-pixbuf2 2.31.3-1
geany 1.24.1-1
gemrb 0.8.2-1
geoclue 0.12.99-2
geoclue2 2.2.0-2
geocode-glib 3.16.0-1
gettext 0.19.4-1
ghostscript 9.16-1
giflib 5.1.1-1
git 2.3.7-1
gjs 1.43.3-1
glew 1.12.0-1
glib-networking 2.44.0-2
glib2 2.44.0-1
glibc 2.21-3
glibmm 2.44.0-1
glproto 1.4.17-1
glu 9.0.0-3
gmime 2.6.20-2
gmp 6.0.0-2
gnome-bluetooth 3.16.1-1
gnome-color-manager 3.16.0-1
gnome-control-center 3.16.1-2
gnome-desktop 1:3.16.1-1
gnome-dictionary 3.16.1-1
gnome-disk-utility 3.16.0-1
gnome-menus 3.13.3-1
gnome-online-accounts 3.16.0-2
gnome-session 3.16.0-1
gnome-settings-daemon 3.16.1-1
gnome-shell 3.16.1-2
gnome-shell-extensions 3.16.1-1
gnome-system-monitor 3.16.0-1
gnome-themes-standard 3.16.0-1
gnome-tweak-tool 3.16.1-1
gnome-video-effects 0.4.1-1
gnupg 2.1.3-3
gnuplot 5.0.0-2
gnutls 3.4.0-1
gobject-introspection 1.44.0-1
gobject-introspection-runtime 1.44.0-1
google-chrome 42.0.2311.135-1
gparted 0.22.0-1
gpgme 1.5.4-1
gpm 1.20.7-4
graphite 1:1.2.4-1
grep 2.21-2
grilo 0.2.12-1
groff 1.22.3-3
grsync 1.2.5-1
grub 1:2.02.beta2-5
gsettings-desktop-schemas 3.16.1-1
gsfonts 20150122-1
gsm 1.0.13-8
gssproxy 0.4.1-1
gst-libav 1.4.5-1
gst-plugins-bad 1.4.5-2
gst-plugins-base 1.4.5-1
gst-plugins-base-libs 1.4.5-1
gst-plugins-good 1.4.5-2
gst-plugins-ugly 1.4.5-2
gstreamer 1.4.5-1
gstreamer0.10 0.10.36-4
gstreamer0.10-base 0.10.36-3
gstreamer0.10-base-plugins 0.10.36-3
gstreamer0.10-good 0.10.31-6
gstreamer0.10-good-plugins 0.10.31-6
gstreamer0.10-python 0.10.22-2
gstreamer0.10-ugly 0.10.19-14
gstreamer0.10-ugly-plugins 0.10.19-14
gthumb 3.4.0-1
gtk-update-icon-cache 2.24.27-1
gtk2 2.24.27-1
gtk3 3.16.2-1
gtkmm 2.24.4-1
gtkmm3 3.16.0-1
guile 2.0.11-2
gvfs 1.24.1-1
gvfs-mtp 1.24.1-1
gzip 1.6-1
hal-info 0.20091130-2
harfbuzz 0.9.40-2
harfbuzz-icu 0.9.40-2
haveged 1.9.1-2
hdparm 9.45-1
hdsentinel 0.8-2
help2man 1.46.4-1
hicolor-icon-theme 0.13-1
hplip 3.15.4-1
hspell 1.2-2
htmlcxx 0.85-4
htop 1.0.3-2
hunspell 1.3.3-1
hwids 20150129-1
hwinfo 21.10.1.1-1
hwloc 1.10.1-1
hyphen 2.8.8-1
i3-wm 4.10.2-1
i3lock 2.6-1
i3status 2.9-1
i7z 0.27.2.git1-1
iana-etc 2.30-4
icedtea-web 1.5.2-1
icu 55.1-1
imagemagick 6.9.1.0-1
imagewriter 1.10.1420800585.134a9b3-1
imlib2 1.4.7-1
inetutils 1.9.2-2
innoextract 1.4-0
inputproto 2.3.1-1
intel-tbb 4.3_20150209-1
intel-ucode 20150121-1
inxi 2.2.19-1
iproute2 3.19.0-1
iptables 1.4.21-3
iputils 20121221-3
ipython 3.1.0-1
iso-codes 3.57-1
jack 0.124.1-3
jansson 2.7-1
jasper 1.900.1-13
java-environment-common 2-2
java-runtime-common 2-2
jdk7-openjdk 7.u79_2.5.5-1
jfsutils 1.1.15-4
jmtpfs 0.5-1
jre7-openjdk 7.u79_2.5.5-1
jre7-openjdk-headless 7.u79_2.5.5-1
js 24.2.0-1
js17 17.0.0-1
json-c 0.12-2
json-glib 1.0.2-1
jsoncpp 1.4.4-1
julia 2:0.3.7-1
julia-docs 2:0.3.7-1
kbd 2.0.2-1
kbproto 1.0.7-1
keyutils 1.5.9-1
kmod 20-1
krb5 1.13.1-1
kvirc 4.2.0-4
lame 3.99.5-2
lapack 3.5.0-1
lcms 1.19-5
lcms2 2.6-1
ldb 1.1.20-1
ldns 1.6.17-2
less 471-1
lgogdownloader-git 20150310-1
lib32-acl 2.2.52-2
lib32-alsa-lib 1.0.29-1
lib32-alsa-plugins 1.0.29-2
lib32-atk 2.16.0-1
lib32-attr 2.4.47-1
lib32-bzip2 1.0.6-2
lib32-cairo 1.14.2-1
lib32-curl 7.41.0-1
lib32-db 5.3.28-2
lib32-e2fsprogs 1.42.12-1
lib32-elfutils 0.161-2
lib32-expat 2.1.0-2
lib32-fakeroot 1.20.2-1
lib32-flac 1.3.1-1
lib32-flashplugin 11.2.202.457-1
lib32-fontconfig 2.11.1-1
lib32-freetype2 2.5.5-1
lib32-gcc-libs 4.9.2-4
lib32-gdk-pixbuf2 2.31.3-2
lib32-gettext 0.19.4-1
lib32-giflib 5.1.1-1
lib32-glew 1.12.0-1
lib32-glib2 2.44.0-1
lib32-glibc 2.21-2
lib32-glu 9.0.0-2
lib32-gmp 6.0.0-1
lib32-gnutls 3.4.0-2
lib32-gsm 1.0.13-9
lib32-gtk2 2.24.27-1
lib32-harfbuzz 0.9.40-2
lib32-icu 55.1-1
lib32-jack 0.124.1-1
lib32-json-c 0.12-1
lib32-keyutils 1.5.9-1
lib32-krb5 1.13.1-1
lib32-lcms2 2.6-1
lib32-libaio 0.3.110-1
lib32-libasyncns 0.8-7
lib32-libcanberra 0.30-4
lib32-libcap 2.24-1
lib32-libcl 1.1-1
lib32-libcups 2.0.2-2
lib32-libdbus 1.8.16-1
lib32-libdrm 2.4.60-1
lib32-libffi 3.2.1-1
lib32-libgcrypt 1.6.3-1
lib32-libgpg-error 1.18-1
lib32-libice 1.0.9-1
lib32-libidn 1.30-1
lib32-libjpeg-turbo 1.4.0-1
lib32-libldap 2.4.40-1
lib32-libltdl 2.4.5-1
lib32-libnl 3.2.25-1
lib32-libogg 1.3.2-1
lib32-libpcap 1.6.2-1
lib32-libpciaccess 0.13.4-1
lib32-libpng 1.6.16-1
lib32-libpulse 6.0-1
lib32-libsamplerate 0.1.8-2
lib32-libsm 1.2.2-1
lib32-libsndfile 1.0.25-3
lib32-libssh2 1.5.0-1
lib32-libtasn1 4.4-1
lib32-libtiff 4.0.3-3
lib32-libtxc_dxtn 1.0.1-5
lib32-libusb 1.0.19-1
lib32-libvorbis 1.3.5-1
lib32-libx11 1.6.3-1
lib32-libxau 1.0.8-1
lib32-libxcb 1.11-1
lib32-libxcomposite 0.4.4-2
lib32-libxcursor 1.1.14-1
lib32-libxdamage 1.1.4-2
lib32-libxdmcp 1.1.2-1
lib32-libxext 1.3.3-1
lib32-libxfixes 5.0.1-1
lib32-libxft 2.3.2-1
lib32-libxi 1.7.4-1
lib32-libxinerama 1.1.3-1
lib32-libxml2 2.9.2-1
lib32-libxmu 1.1.2-1
lib32-libxrandr 1.4.2-1
lib32-libxrender 0.9.8-1
lib32-libxshmfence 1.2-1
lib32-libxslt 1.1.28-2
lib32-libxt 1.1.4-1
lib32-libxtst 1.2.2-1
lib32-libxxf86vm 1.1.4-1
lib32-llvm-libs 3.6.0-1
lib32-mesa 10.5.4-1
lib32-mpg123 1.22.1-1
lib32-ncurses 5.9-3
lib32-nettle 3.1.1-1
lib32-nspr 4.10.8-1
lib32-nss 3.18-1
lib32-nvidia-libgl 349.16-1
lib32-nvidia-utils 349.16-1
lib32-openal 1.16.0-1
lib32-openssl 1.0.2.a-1
lib32-p11-kit 0.23.1-2
lib32-pango 1.36.8-1
lib32-pcre 8.36-1
lib32-pixman 0.32.6-1
lib32-portaudio 19_20140130-1
lib32-readline 6.3.008-1
lib32-sdl 1.2.15-6
lib32-soundtouch 1.8.0-1
lib32-sqlite 3.8.9-1
lib32-systemd 219-1
lib32-tdb 1.3.4-1
lib32-util-linux 2.26.1-1
lib32-v4l-utils 1.6.0-1
lib32-wayland 1.7.0-1
lib32-wxgtk 3.0.2-4
lib32-xz 5.2.1-1
lib32-zlib 1.2.8-1
libabw 0.1.1-1
libaio 0.3.110-1
libao 1.2.0-1
libarchive 3.1.2-8
libart-lgpl 2.3.21-3
libass 0.12.1-1
libassuan 2.2.0-1
libasyncns 0.8-5
libatasmart 0.19-3
libatomic_ops 7.4.2-1
libavc1394 0.5.4-2
libbluray 0.8.0-1
libbsd 0.7.0-1
libcaca 0.99.beta18-2
libcanberra 0.30-5
libcanberra-pulse 0.30-5
libcap 2.24-2
libcap-ng 0.7.4-1
libcddb 1.3.2-4
libcdio 0.93-1
libcdio-paranoia 10.2+0.93+1-1
libcdr 0.1.1-2
libcl 1.1-4
libcroco 0.6.8-2
libcue 1.4.0-4
libcups 2.0.2-4
libdaemon 0.14-3
libdatrie 0.2.8-1
libdbus 1.8.16-2
libdca 0.0.5-4
libdrm 2.4.60-2
libdv 1.0.0-6
libdvbpsi 1:1.1.2-1
libdvdcss 1.3.0-1
libdvdnav 5.0.2-1
libdvdread 5.0.1-1
libe-book 0.1.2-2
libebml 1.3.1-1
libedit 20150325_3.1-1
libepoxy 1.2-2
libetonyek 0.1.1-1
libev 4.19-1
libevdev 1.4.2-1
libevent 2.0.22-1
libexif 0.6.21-2
libffi 3.2.1-1
libfontenc 1.1.3-1
libftdi-compat 0.20-1
libgcrypt 1.6.3-2
libgcrypt15 1.5.4-4
libgdm 3.16.1.1-1
libgee 0.18.0-1
libglade 2.6.4-5
libgme 0.6.0-3
libgnome-keyring 3.12.0-2
libgnomekbd 3.6.0-2
libgpg-error 1.19-1
libgpod 0.8.3-4
libgssglue 0.4-2
libgsystem 2015.1-1
libgtop 2.30.0-1
libgusb 0.2.4-1
libgweather 3.16.1-1
libgxps 0.2.2-3
libibus 1.5.10-1
libical 1.0.1-2
libice 1.0.9-1
libid3tag 0.15.1b-8
libidn 1.30-1
libiec61883 1.2.0-4
libimobiledevice 1.2.0-1
libinput 0.14.1-1
libirman 0.4.5-4
libjpeg-turbo 1.4.0-1
libkate 0.4.1-5
libksba 1.3.3-1
liblastfm 1.0.9-1
libldap 2.4.40-2
liblqr 0.4.2-1
libmaa 1.3.2-2
libmad 0.15.1b-7
libmatroska 1.4.2-1
libmediainfo 0.7.73-1
libmikmod 3.3.7-1
libmm-glib 1.4.6-1
libmms 0.6.4-1
libmng 2.0.2-3
libmodplug 0.8.8.5-1
libmp4v2 2.0.0-3
libmpc 1.0.3-1
libmpcdec 1.2.6-4
libmpeg2 0.5.1-5
libmspub 0.1.2-2
libmtp 1.1.8-1
libmwaw 0.3.4-1
libmygpo-qt 1.0.8-1
libndp 1.4-1
libnewt 0.52.18-2
libnl 3.2.25-1
libnm-glib 1.0.0-2
libnotify 0.7.6-1
liboauth 1.0.3-1
libodfgen 0.1.3-1
libofa 0.9.3-5
libogg 1.3.2-1
libomxil-bellagio 0.9.3-1
libpagemaker 0.0.2-1
libpaper 1.1.24-7
libpcap 1.6.2-1
libpciaccess 0.13.4-1
libpipeline 1.4.0-1
libplist 1.12-1
libpng 1.6.16-1
libproxy 0.4.11-5
libpulse 6.0-1
libpwquality 1.2.3-1
libquvi 0.9.4-3
libquvi-scripts 0.9.20131130-2
libqzeitgeist 0.8.0-4
libraw 0.16.0-3
libraw1394 2.1.0-2
libreoffice-fresh 4.4.2-1
librevenge 0.0.2-1
librpcsecgss 0.19-8
librsvg 1:2.40.9-1
libsamplerate 0.1.8-3
libsasl 2.1.26-7
libseccomp 2.2.0-1
libsecret 0.18-1
libshout 1:2.3.1-2
libsidplay 1.36.59-6
libsigc++ 2.4.1-1
libsigsegv 2.10-2
libsm 1.2.2-2
libsndfile 1.0.25-3
libsodium 1.0.2-1
libsoup 2.50.0-1
libspectre 0.2.7-2
libsrtp 15.1c9bd90-3
libssh 0.6.5-1
libssh2 1.5.0-1
libsystemd 219-6
libtar 1.2.20-2
libtasn1 4.4-1
libteam 1.14-2
libthai 0.1.21-1
libtheora 1.1.1-3
libtiff 4.0.3-5
libtiger 0.3.4-4
libtirpc 0.2.5-1
libtool 2.4.6-1
libtxc_dxtn 1.0.1-6
libunibreak 1.1-1
libunistring 0.9.5-1
libunwind 1.1-2
libupnp 1.6.19-1
libusb 1.0.19-1
libusb-compat 0.1.5-1
libusbmuxd 1.0.10-1
libutempter 1.1.6-2
libutil-linux 2.26.1-3
libva 1.5.1-1
libvdpau 1.1-1
libvisio 0.1.1-2
libvisual 0.4.0-5
libvorbis 1.3.5-1
libvpx 1.4.0-2
libwacom 0.11-1
libwbclient 4.2.1-1
libwebp 0.4.3-1
libwmf 0.2.8.4-12
libwpd 0.10.0-1
libwpg 0.3.0-1
libwps 0.3.1-1
libx11 1.6.3-1
libx264 2:144.20150223-1
libx86 1.1-4
libx86emu 1.1.23.1-1
libxau 1.0.8-2
libxaw 1.0.13-1
libxcb 1.11-1
libxcomposite 0.4.4-2
libxcursor 1.1.14-2
libxdamage 1.1.4-2
libxdg-basedir 1.2.0-3
libxdmcp 1.1.2-1
libxext 1.3.3-1
libxfixes 5.0.1-1
libxfont 1.5.1-1
libxft 2.3.2-1
libxi 1.7.4-1
libxinerama 1.1.3-2
libxkbcommon 0.5.0-1
libxkbcommon-x11 0.5.0-1
libxkbfile 1.0.9-1
libxklavier 5.4-1
libxml2 2.9.2-2
libxmu 1.1.2-1
libxp 1.0.3-1
libxpm 3.5.11-1
libxrandr 1.4.2-2
libxrender 0.9.9-1
libxshmfence 1.2-1
libxslt 1.1.28-3
libxss 1.2.2-2
libxt 1.1.5-1
libxtst 1.2.2-1
libxv 1.0.10-1
libxvmc 1.0.9-1
libxxf86dga 1.1.4-1
libxxf86vm 1.1.4-1
libyaml 0.1.6-1
libzen 0.4.31-1
libzip 0.11.2-1
licenses 20140629-1
links 2.9-1
linux 3.19.3-3
linux-api-headers 3.18.5-1
linux-firmware 20150410.ec89525-1
lirc 1:0.9.2.a-1
llvm-libs 3.6.0-5
lm_sensors 3.3.5-1
logrotate 3.8.9-1
lpsolve 5.5.2.0-3
lrzip 0.621-1
lua 5.2.4-1
lua-bitop 1.0.2-5
lua-expat 1.3.0-1
lua-lgi 0.8.0-2
lua-socket 3.0rc1-4
lua51 5.1.5-4
luajit 2.0.3-3
lvm2 2.02.116-1
lxdream 0.9.1-3
lz4 128-1
lzo 2.09-1
m4 1.4.17-1
make 4.1-1
man-db 2.7.1-1
man-pages 3.83-1
mcomix 1.01-1
mcpp 2.7.2-5
mdadm 3.3.2-1
memtest86+ 5.01-1
mencoder 37379-3
mesa 10.5.4-1
metamorphose2 0.8.3-2
mime-types 9-1
minitube 2.4-1
mjpegtools 2.1.0-1
mkinitcpio 18-2
mkinitcpio-busybox 1.21.1-2
mkvtoolnix-cli 7.8.0-3
mobile-broadband-provider-info 20120614-2
morituri-git 0.2.3.r3.gb1d685f-1
mozilla-common 1.4-4
mpfr 3.1.2.p11-1
mpg123 1.22.1-1
mplayer 37379-3
mtdev 1.1.5-1
mutagen 1.28-1
mutter 3.16.1.1-1
ncurses 5.9-7
nemo 2.4.5-1
neon 0.30.1-1
net-snmp 5.7.3-1
netctl 1.10-2
nettle 3.1.1-1
network-manager-applet 1.0.0-2
networkmanager 1.0.0-2
nfs-utils 1.3.2-6
nfsidmap 0.26-1
nm-connection-editor 1.0.0-2
npth 1.2-1
nspr 4.10.8-1
nss 3.18-3
ntfs-3g 2015.3.14-1
nvidia 349.16-1
nvidia-libgl 349.16-1
nvidia-utils 349.16-1
ogmtools 1.5-5
openal 1.16.0-1
opencore-amr 0.1.3-2
openjpeg 1.5.2-1
openmpi 1.8.4-1
openresolv 3.6.1-1
openssh 6.8p1-2
openssl 1.0.2.a-1
opus 1.1-1
orc 0.4.23-1
os-prober 1.64-1
p11-kit 0.23.1-2
p7zip 9.38.1-3
package-query 1.5-2
pacman 4.2.1-1
pacman-mirrorlist 20150315-1
pacmatic 20150126-1
pam 1.1.8-5
pambase 20130928-1
pango 1.36.8-1
pangomm 2.36.0-1
par2cmdline-tbb 20141125-1
parallel 20150322-1
parted 3.2-2
patch 2.7.5-1
pciutils 3.3.1-1
pcmciautils 018-7
pcre 8.36-2
pcsx2-git 1.3.1.r978.1aebca3-1
perl 5.20.2-1
perl-clone 0.37-2
perl-data-dump 1.22-1
perl-dbi 1.633-1
perl-encode-locale 1.04-1
perl-error 0.17023-1
perl-file-basedir 0.07-1
perl-file-listing 6.04-2
perl-file-which 1.09-4
perl-html-parser 3.71-3
perl-html-tagset 3.20-4
perl-http-cookies 6.01-2
perl-http-daemon 6.01-2
perl-http-date 6.02-2
perl-http-message 6.06-2
perl-http-negotiate 6.01-2
perl-ipc-system-simple 1.25-1
perl-libwww 6.08-1
perl-locale-gettext 1.05-11
perl-lwp-mediatypes 6.02-2
perl-net-http 6.07-1
perl-uri 1.67-1
perl-www-robotrules 6.02-2
perl-xml-libxml 2.0121-1
perl-xml-namespacesupport 1.11-3
perl-xml-sax 0.99-4
perl-xml-sax-base 1.08-3
phonon-qt4 4.8.3-1
phonon-qt4-gstreamer 4.8.2-1
phoronix-test-suite 5.6.0-1
php 5.6.8-2
pinentry 0.9.1-1
pixman 0.32.6-1
pkg-config 0.28-2
pkgfile 15-1
pms 1.90.1-1
podofo 0.9.3-1
polkit 0.112-2
poppler 0.32.0-1
poppler-glib 0.32.0-1
poppler-qt5 0.32.0-1
popt 1.16-7
portaudio 19_20140130-1
presentproto 1.0-1
printproto 1.0.5-3
procps-ng 3.3.10-2
protobuf 2.6.1-1
psmisc 22.21-2
pth 2.0.7-5
pulseaudio 6.0-1
pulseaudio-alsa 2-3
pv 1.6.0-1
pygobject-devel 3.16.1-1
pygobject2-devel 2.28.6-11
pygtk 2.24.0-5
pyqt4-common 4.11.3-4
pyqt5-common 5.4.1-2
python 3.4.3-2
python-dateutil 2.4.1-1
python-dbus 1.2.0-4
python-dbus-common 1.2.0-4
python-gmpy2 2.0.5-2
python-gobject 3.16.1-1
python-html2text 2015.4.14-1
python-matplotlib 1.4.3-2
python-mpmath 0.19-1
python-nose 1.3.6-1
python-numexpr 2.4.3-1
python-numpy 1.9.2-2
python-pandas 0.16.0-2
python-pygments 2.0.2-2
python-pyparsing 2.0.3-1
python-pyqt4 4.11.3-4
python-pyqt5 5.4.1-2
python-pytz 2015.2-1
python-pyzmq 14.5.0-2
python-scipy 0.15.1-2
python-setuptools 1:15.2-1
python-sip 4.16.7-1
python-six 1.9.0-1
python-sympy 0.7.6-2
python-tornado 4.1.0-2
python-xdg 0.25-2
python2 2.7.9-1
python2-apsw 3.8.9-1
python2-atspi 2.16.0-1
python2-beaker 1.7.0-1
python2-cairo 1.10.0-2
python2-chardet 2.3.0-1
python2-cherrypy 3.6.0-1
python2-cssselect 0.9.1-2
python2-cssutils 1.0-2
python2-dateutil 2.4.1-1
python2-dbus 1.2.0-4
python2-dnspython 1.12.0-1
python2-gobject 3.16.1-1
python2-gobject2 2.28.6-11
python2-html5lib 0.999-5
python2-lxml 3.4.4-1
python2-mako 1.0.1-1
python2-markupsafe 0.23-2
python2-mechanize 0.2.5-4
python2-netifaces 0.10.4-1
python2-pillow 2.8.1-1
python2-psutil 2.2.1-2
python2-pycdio 0.20-3
python2-pygments 2.0.2-2
python2-pyqt5 5.4.1-2
python2-setuptools 1:15.2-1
python2-sip 4.16.7-1
python2-six 1.9.0-1
python2-xdg 0.25-2
qca 2.0.3-5
qca-ossl 2.0.0-7
qjson 0.8.1-3
qpdf 5.1.2-1
qt4 4.8.6-5
qt5-base 5.4.1-4
qt5-declarative 5.4.1-4
qt5-location 5.4.1-4
qt5-script 5.4.1-4
qt5-sensors 5.4.1-4
qt5-svg 5.4.1-4
qt5-tools 5.4.1-4
qt5-translations 5.4.1-4
qt5-webchannel 5.4.1-4
qt5-webkit 5.4.1-4
qt5-xmlpatterns 5.4.1-4
qtchooser 48-1
qtwebkit 2.3.4-1
randrproto 1.4.1-1
raptor 2.0.15-2
rasqal 1:0.9.32-1
readline 6.3.008-1
recode 3.6-8
recordproto 1.14.2-2
redland 1:1.0.17-2
reflector 2014.11-1
reiserfsprogs 3.6.24-1
renderproto 0.11.1-3
resourceproto 1.2.0-3
rest 0.7.93-1
rhash 1.3.3-1
rng-tools 5-3
rpcbind 0.2.3-1
rsync 3.1.1-2
rtkit 0.11-5
rtmpdump 20140918-2
ruby 2.2.2-1
s-nail 14.8.0-1
sbc 1.3-1
schroedinger 1.0.11-2
scrnsaverproto 1.2.2-2
sdcv 0.4.2-8
sdl 1.2.15-7
sdl_image 1.2.12-3
sdl_mixer 1.2.12-4
sdl_net 1.2.8-2
sdl_ttf 2.0.11-3
sed 4.2.2-3
sg3_utils 1.40-1
shadow 4.2.1-3
shared-color-targets 0.1.5-1
shared-mime-info 1.4-1
sip 4.16.7-1
slang 2.3.0-1
smartmontools 6.3-2
smbclient 4.2.1-1
smpeg 0.4.5-1
snappy 1.1.1-1
sound-theme-freedesktop 0.8-2
soundtouch 1.8.0-1
spandsp 0.0.6-1
speech-dispatcher 0.8.1-1
speedtest-cli 0.3.1-1
speex 1.2rc2-1
speexdsp 1.2rc3-1
spotify 0.9.17.1-1
spotify-gnome-git 20141010-1
sqlite 3.8.9-1
startup-notification 0.12-4
steam 1.0.0.49-3
sudo 1.8.13-1
suitesparse 4.4.4-1
sysfsutils 2.1.0-9
systemd 219-6
systemd-sysvcompat 219-6
t1lib 5.1.2-5
taglib 1.9.1-1
talloc 2.1.2-1
tar 1.28-1
tdb 1.3.4-1
telepathy-glib 0.24.1-1
telepathy-logger 0.8.1-1
telepathy-mission-control 5.16.3-1
terminology 0.8.0-1
tevent 0.9.24-1
texinfo 5.2-3
texlive-bin 2014.34260-7
texlive-core 2014.36709-1
texlive-langchinese 2014.35921-1
texlive-langcjk 2014.0-1
texlive-langjapanese 2014.36466-1
texlive-langkorean 2014.36573-1
texlive-latexextra 2014.36706-1
texlive-pictures 2014.36605-1
texlive-science 2014.36659-1
texmaker 4.4.1-1
thin-provisioning-tools 0.4.1-1
thunderbird 31.6.0-2
tinyxml 2.6.2-3
tmux 1.9_a-2
totem-plparser 3.10.4-1
transmission-gtk 2.84-1
tsmuxer 1.10.6-14
ttf-dejavu 2.34-2
ttf-ms-fonts 2.0-10
tzdata 2015d-1
udisks2 2.1.5-1
unrar 1:5.2.7-1
unzip 6.0-10
upower 0.99.2-2
usbutils 008-1
util-linux 2.26.1-3
v4l-utils 1.6.2-1
vi 1:050325-4
videoproto 2.3.2-1
vim 7.4.712-1
vim-latexsuite 20130126-2
vim-runtime 7.4.712-1
vlc 2.2.1-2
vte-common 0.40.0-2
vte3 0.40.0-2
wavpack 4.70.0-2
wayland 1.7.0-1
webkit2gtk 2.8.1-1
webkitgtk 2.4.8-2
webrtc-audio-processing 0.1-2
wesnoth 1.12.2-2
wesnoth-data 1.12.2-1
wget 1.16.3-1
which 2.21-1
wildmidi 0.3.8-1
wine 1.7.42-2
winetricks 20141130-1
wireless_tools 30.pre9-1
wpa_supplicant 1:2.3-1
wxgtk 3.0.2-4
wxgtk2.8 2.8.12.1-3
wxpython 3.0.2.0-1
wxpython2.8 2.8.12.1-1
x265 1.6-1
xboxdrv 0.8.5-3
xcb-proto 1.11-1
xcb-util 0.4.0-1
xcb-util-cursor 0.1.2-1
xcb-util-image 0.4.0-1
xcb-util-keysyms 0.4.0-1
xcb-util-renderutil 0.3.9-1
xcb-util-wm 0.4.1-1
xdg-su 1.2.3-1
xdg-utils 1.1.0.git20150323-1
xdiskusage 1.51-1
xextproto 7.3.0-1
xf86-input-evdev 2.9.2-1
xf86dgaproto 2.1-3
xf86driproto 2.1.1-3
xf86vidmodeproto 2.3.1-3
xfsprogs 3.2.2-1
xineramaproto 1.2.1-3
xkeyboard-config 2.14-1
xorg-appres 1.0.4-1
xorg-bdftopcf 1.0.5-1
xorg-font-util 1.3.1-1
xorg-font-utils 7.6-4
xorg-fonts-alias 1.0.3-1
xorg-fonts-encodings 1.0.4-4
xorg-fonts-misc 1.0.3-3
xorg-iceauth 1.0.7-1
xorg-mkfontdir 1.0.7-2
xorg-mkfontscale 1.1.2-1
xorg-server 1.17.1-5
xorg-server-common 1.17.1-5
xorg-server-devel 1.17.1-5
xorg-server-utils 7.6-4
xorg-sessreg 1.1.0-1
xorg-setxkbmap 1.3.1-1
xorg-util-macros 1.19.0-1
xorg-xauth 1.0.9-1
xorg-xbacklight 1.2.1-1
xorg-xcmsdb 1.0.5-1
xorg-xgamma 1.0.6-1
xorg-xhost 1.0.7-1
xorg-xinit 1.3.4-2
xorg-xinput 1.6.1-1
xorg-xkbcomp 1.3.0-1
xorg-xmessage 1.0.4-2
xorg-xmodmap 1.0.9-1
xorg-xrandr 1.4.3-1
xorg-xrdb 1.1.0-1
xorg-xrefresh 1.0.5-1
xorg-xset 1.2.3-1
xorg-xsetroot 1.1.1-2
xproto 7.0.27-1
xscreensaver 5.32-1
xvidcore 1.3.3-1
xz 5.2.1-1
yajl 2.1.0-1
yaourt 1.5-1
zenity 3.14.0-1
zeromq 4.0.5-1
zita-alsa-pcmi 0.2.0-2
zita-resampler 1.3.0-3
zlib 1.2.8-3
zvbi 0.2.35-1
zziplib 0.13.62-2
[edit5] My /etc/modules-load.d directory is empty by the way, and "sudo /usr/lib/systemd/systemd-modules-load" returns nothing. Note, this is all while running Linux 3.19, but I believe it should demonstrate that I don't have any special modules running. Or so I believe.
Last edited by nstgc (2015-05-04 13:16:09) -
After upgrade to OSX Mavericks my 2009 MBP keeps crashing due to kernel panic
After upgrade to OSX Mavericks my 2009 MBP keeps crashing due to kernel panic (happens every 20 minutes or so). Please help me with this, it's getting very frustrating. Have tried disk utility, there were errors (file system was corrupted), the disk utility managed to repair the disk but the crashes continue.
Etre-check:
EtreCheck version: 1.9.12 (48)
Report generated 26 juli 2014 12:29:37 CEST
Hardware Information:
MacBook Pro (13-inch, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 0:14:20
Disk Information:
FUJITSU MJA2160BH FFS G1 disk0 : (160,04 GB)
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 159,18 GB (26 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS23N
USB Information:
Apple Internal Memory Card Reader
Iomega Iomega 500,11 GB
EFI (disk1s1) <not mounted>: 209,7 MB
IOMEGA (disk1s2) /Volumes/IOMEGA: 499,76 GB (499,32 GB free)
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) Support
[not loaded] com.caiaq.driver.NIUSBGuitarRigMobileDriver (2.4.23) Support
[not loaded] com.caiaq.driver.NIUSBHardwareDriver (2.4.23) Support
[loaded] com.fortinet.fct.kext.avkern (1.0.1 - SDK 10.7) Support
[not loaded] com.fortinet.fct.kext.fctapnke (1 - SDK 10.7) Support
[loaded] com.fortinet.fct.kext.fctwfnke (1.0 - SDK 10.7) Support
[not loaded] com.fortinet.kext.fctrouternke (1 - SDK 10.7) Support
[not loaded] nl.bjaelectronics.driver.PL2303 (1.0.0d1) Support
[loaded] org.virtualbox.kext.VBoxDrv (4.2.12) Support
[not loaded] org.virtualbox.kext.VBoxNetAdp (4.2.12) Support
[not loaded] org.virtualbox.kext.VBoxNetFlt (4.2.12) Support
[loaded] org.virtualbox.kext.VBoxUSB (4.2.12) Support
Startup Items:
ChmodBPF: Path: /Library/StartupItems/ChmodBPF
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
M-Audio Firmware Loader: Path: /Library/StartupItems/M-Audio Firmware Loader
StartOuc: Path: /Library/StartupItems/StartOuc
VirtualBox: Path: /Library/StartupItems/VirtualBox
wpa_supplicant_srv: Path: /Library/StartupItems/wpa_supplicant_srv
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.fortinet.forticlient.appfw.plist Support
[running] com.fortinet.forticlient.epctrl.plist Support
[running] com.fortinet.forticlient.fmon.plist Support
[running] com.fortinet.forticlient.servctl.plist Support
[loaded] com.fortinet.forticlient.vpn.plist Support
[running] com.fortinet.forticlient.wf.plist Support
[not loaded] com.teamviewer.teamviewer_service.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
Launch Agents:
[not loaded] com.teamviewer.teamviewer.plist Support
[not loaded] com.teamviewer.teamviewer_desktop.plist Support
[loaded] org.macosforge.xquartz.startx.plist Support
User Launch Agents:
[failed] com.adobe.ARM.[...].plist Support
[running] com.spotify.webhelper.plist Support
[not loaded] org.virtualbox.vboxwebsrv.plist Support
User Login Items:
FIREBOX Control
iTunesHelper
Dropbox
Emil
NIHardwareAgent
FortiClientAgent
Internet Plug-ins:
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
CitrixICAClientPlugIn: Version: 11.1.0 Support
Silverlight: Version: 4.1.10329.0 Support
iPhotoPhotocast: Version: 7.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Citrix online plug-in Support
Flash Player Support
Native Instruments USB Audio Support
Time Machine:
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 148.25 GB Disk used: 124.04 GB
Destinations:
IOMEGA [Local] (Last used)
Total size: 0 B
Total number of backups: (null)
Size of backup disk: Too small
Backup size 0 B < (Disk used 124.04 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
8% mds_stores
4% com.apple.WebKit.WebContent
2% Safari
1% WindowServer
1% diskimages-helper
Top Processes by Memory:
190 MB mds_stores
106 MB com.apple.WebKit.WebContent
98 MB Safari
90 MB com.apple.IconServicesAgent
82 MB Dropbox
Virtual Memory Information:
4.64 GB Free RAM
1.52 GB Active RAM
947 MB Inactive RAM
684 MB Wired RAM
1.20 GB Page-ins
0 B Page-outsHi, thanks for the reply. I deleted some of the old stuff that showed up on the report (have removed virtual box long ago but some residual files were apparently left). It didn't help though. Will remove forticlient too as a test.
Meanwhile here's the new etre-check and crash report:
last crash:
Anonymous UUID: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
Sat Jul 26 13:21:42 2014
panic(cpu 1 caller 0xffffff801a2dc24e): Kernel trap at 0xffffff801a5e2e49, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffef811ca9bea0, CR3: 0x000000004274c000, CR4: 0x0000000000000660
RAX: 0x0000000000000100, RBX: 0xffffff802dd897b0, RCX: 0x00000000e7b76fff, RDX: 0x0000000018489000
RSP: 0xffffff811ca9be00, RBP: 0xffffff811ca9be00, RSI: 0xffffff8115e0d068, RDI: 0xffffef811ca9be80
R8: 0xffffff8115d9d078, R9: 0xffffff8115e0d068, R10: 0xffffff811ca9bb90, R11: 0x0000000000000246
R12: 0x0000000000000000, R13: 0xffffff801a7693d1, R14: 0xffffef811ca9be80, R15: 0x0000000000000000
RFL: 0x0000000000010282, RIP: 0xffffff801a5e2e49, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffef811ca9bea0, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff811ca9ba90 : 0xffffff801a222f79
0xffffff811ca9bb10 : 0xffffff801a2dc24e
0xffffff811ca9bce0 : 0xffffff801a2f3746
0xffffff811ca9bd00 : 0xffffff801a5e2e49
0xffffff811ca9be00 : 0xffffff801a5f6733
0xffffff811ca9be60 : 0xffffff801a5f20be
0xffffff811ca9bf00 : 0xffffff801a5f1ecf
0xffffff811ca9bf60 : 0xffffff801a640777
0xffffff811ca9bfb0 : 0xffffff801a2f3c38
BSD process name corresponding to current thread: dbfseventsd
Mac OS version:
13E28
Kernel version:
Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
Kernel slide: 0x000000001a000000
Kernel text base: 0xffffff801a200000
System model name: MacBookPro5,5 (Mac-F2268AC8)
System uptime in nanoseconds: 3901629665348
last loaded kext at 3718616795316: com.apple.driver.AppleIntelMCEReporter 104 (addr 0xffffff7f9c773000, size 49152)
last unloaded kext at 3844885002402: com.apple.driver.AppleUSBCDC 4.2.1b5 (addr 0xffffff7f9c658000, size 16384)
loaded kexts:
com.fortinet.fct.kext.avkern 1.0.1
com.fortinet.fct.kext.fctwfnke 1.0
org.virtualbox.kext.VBoxUSB 4.2.12
org.virtualbox.kext.VBoxDrv 4.2.12
com.apple.filesystems.smbfs 2.0.2
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.28
com.apple.iokit.IOBluetoothSerialManager 4.2.6f1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.GeForceTesla 8.2.4
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.driver.AppleUSBCardReader 3.4.1
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.nvenet 2.0.21
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleUSBOHCI 656.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.kext.triggers 1.0
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothFamily 4.2.6f1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleUSBMultitouch 240.9
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 683.4.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core 2 Duo, 2.26 GHz, 8 GB, SMC 1.47f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341344758334D314131333333433920
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341344758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.6f1 14216, 3 services, 23 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MJA2160BH FFS G1, 160,04 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Internal Memory Card Reader
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Iomega
USB Device: Built-in iSight
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
Thunderbolt Bus:
new etre check:
EtreCheck version: 1.9.12 (48)
Report generated 26 juli 2014 13:24:10 CEST
Hardware Information:
MacBook Pro (13-inch, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
System Software:
OS X 10.9.4 (13E28) - Uptime: 0 days 0:3:27
Disk Information:
FUJITSU MJA2160BH FFS G1 disk0 : (160,04 GB)
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 159,18 GB (26,73 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS23N
USB Information:
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Iomega Iomega 500,11 GB
EFI (disk1s1) <not mounted>: 209,7 MB
IOMEGA (disk1s2) /Volumes/IOMEGA: 499,76 GB (498,79 GB free)
Apple Inc. Built-in iSight
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) Support
[not loaded] com.caiaq.driver.NIUSBGuitarRigMobileDriver (2.4.23) Support
[not loaded] com.caiaq.driver.NIUSBHardwareDriver (2.4.23) Support
[loaded] com.fortinet.fct.kext.avkern (1.0.1 - SDK 10.7) Support
[not loaded] com.fortinet.fct.kext.fctapnke (1 - SDK 10.7) Support
[loaded] com.fortinet.fct.kext.fctwfnke (1.0 - SDK 10.7) Support
[not loaded] com.fortinet.kext.fctrouternke (1 - SDK 10.7) Support
[not loaded] nl.bjaelectronics.driver.PL2303 (1.0.0d1) Support
Startup Items:
ChmodBPF: Path: /Library/StartupItems/ChmodBPF
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
StartOuc: Path: /Library/StartupItems/StartOuc
wpa_supplicant_srv: Path: /Library/StartupItems/wpa_supplicant_srv
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.fortinet.forticlient.appfw.plist Support
[running] com.fortinet.forticlient.epctrl.plist Support
[running] com.fortinet.forticlient.fmon.plist Support
[running] com.fortinet.forticlient.servctl.plist Support
[loaded] com.fortinet.forticlient.vpn.plist Support
[running] com.fortinet.forticlient.wf.plist Support
[loaded] org.macosforge.xquartz.privileged_startx.plist Support
Launch Agents:
[loaded] org.macosforge.xquartz.startx.plist Support
User Launch Agents:
[running] com.spotify.webhelper.plist Support
User Login Items:
Dropbox
Emil
NIHardwareAgent
FortiClientAgent
Internet Plug-ins:
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
CitrixICAClientPlugIn: Version: 11.1.0 Support
Silverlight: Version: 4.1.10329.0 Support
iPhotoPhotocast: Version: 7.0
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Citrix online plug-in Support
Flash Player Support
Native Instruments USB Audio Support
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 148.25 GB Disk used: 123.36 GB
Destinations:
IOMEGA [Local] (Last used)
Total size: 0 B
Total number of backups: (null)
Size of backup disk: Too small
Backup size 0 B < (Disk used 123.36 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
4% mds
4% WindowServer
3% Mail
3% backupd
1% mdworker
Top Processes by Memory:
98 MB com.apple.IconServicesAgent
82 MB Dropbox
74 MB Mail
41 MB WindowServer
41 MB Dock
Virtual Memory Information:
5.66 GB Free RAM
1.17 GB Active RAM
346 MB Inactive RAM
603 MB Wired RAM
318 MB Page-ins
0 B Page-outs -
Tvtime not working after upgrading to kernel-2.6.31-1 (Solved)
Hello friends,
When I am using kernel-2.6.30.8 it was everything ok with my system. tvtime has been working with least cpu utilization then. But after upgrading to kernel-2.6.31-1 I got following error messages when trying to open tvtime
damu@station210 ~]$ tvtime
Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/damu/.tvtime/tvtime.xml
xvoutput: No XVIDEO port found which supports YUY2 images.
*** tvtime requires hardware YUY2 overlay support from your video card
*** driver. If you are using an older NVIDIA card (TNT2), then
*** this capability is only available with their binary drivers.
*** For some ATI cards, this feature may be found in the experimental
*** GATOS drivers: http://gatos.souceforge.net/
*** If unsure, please check with your distribution to see if your
*** X driver supports hardware overlay surfaces.
What happened to driver and kernel? any way to go back to previous kernel version?
Requesting help! Thanks
Last edited by mvdvarrier (2009-10-14 06:26:14)Perry3D wrote:
Are you using the xf86-video-ati/radeonhd driver?
Try disabling KMS by appending nomodeset to the kernel parameters. At the moment kms ist not usable without upgrading some libs (mesa?, libdrm?). Search the forums for kms to get more information.
Thanks Perry3D
I disabled KMS as per http://wiki.archlinux.org/index.php/ATI. Now tvtime is working great. With the release of kernel 2.6.32 KMS can be enabled for ati card with radeon3200 chips
mvdvarrier -
Kernel Panic caused by Nvidia GeForce 7300 GT after Upgrade
Kernel Panic caused by Nvidia GeForce 7300 GT after Upgrade
Mac Pro 2,66 Ghz Dual Core Intel Xeon
driving 2 Apple Cinema Displays 23 (out of order since update) and 30
running Mac OS X Lion 10.7.2
Hi I'm Phil from Germany,
and I have the same problem like many others here: https://discussions.apple.com/thread/1541589?tstart=0
caused by the Nvidia GeForce 7300 GT after combined Upgrade by Apple.
Started with frozen desktop, and ended with a permanent Kernel Panic after a reeboot.
- Safe mode is not running
- System CD is not running
- Apple Hardware Test is ok.
- tried the newest 7300 firmware update
- I have double checked the RAM, and HDD and disconnected all external equipment several times.
System.log at startup ends with the folling permanent Problem:
Previous Shutdown Cause:3
NVDANV40HALG7xxx loaded and registered.
DSMOS has arrived
After running my Mac Pro in Target Mode (Fire Wire Connection with my MacBook Pro) I found the Problem-Folder of the 7300 GT:
File: HD/SYSTEM/LIBRARY/EXTENSIONS/NVDANV40HalG7xxx inside my library and erased them......
NOW MY SYSTEM IS RUNNING AGAIN, but I can't run my System-CDs without a kernel panic,
Time Machine runs without the Starfleet-Background, and my second cinema display still doesn't work any more!
After spending several hours in front of my Mac Pro I'm sure that all of my hardware works fine.
NOW I THINK THE PROBLEM IS: I have to change my ROM-Version on my Nvidia GeForce 7300 GT and install the Firmware 3008.
So how does it work and where can I get this Firmware? Or how can I run an Downgrade from 3011 to 3008?
ANY IDEAS ....or similar cases?
WOULD BE GLAD TO GET SOME HELP!!!!!Thanks Hatter
I'm sure that an ATI 5770 would solve my Problem...and maybe I could save a lot of my time?
But why I should spend 250 € on a new Graphic Board when the old one isn't broken?
Especially when the problem wasn't caused by me.
I need the old firmware, because my System runs with my GT 7300 after removing the software part listed above. Only one of the firmware components that had been updated won't fit in connection with the newer OS X Versions.
I'm also sure that the Problem must be on the Graphic Board, because my System-CD isn't running while pushing the "c" button.
Maybe you are looking for
-
How to build an 8.5 report where a single source repeats with each piece of data
I don't really know how to characterize this problem or if there is a short-hand for the type. Here is my dilemma: I have a SQL table of tracking numbers which is custom to our version of Dynamics. The table contains both orders and invoices. Each
-
HT1420 I can't find the store menu... where's it at?
i can't find the menu in the itunes store help me!!
-
How can I get out of the flashing Apple screen on Iphone 3 ?
How can I get out of the flashing Apple screen on Iphone 3 ?
-
I've heard that you can, via unix commands, tell Tiger to optimize either memory or processor power, to the active application. For example, if I have aperture and photoshop running, but aperture is the forward application (the one that I am actively
-
All of my bookmarks on my IPad were gone this morning!
I don't know what if anything I did. Will this effect my Mac and IPhone? What can I do to recover them?