Resolved Broken Links keep breaking

I am in the proces of doing a Help project. When I open the
project and open the TOC all the items have a broken link beside
them. I then go into tool and into "resolve broken links" and fix
them all and everything seems ok. I then save my project. If start
up the project again all the items in the TOC again have broken
links beside them.... Where have I gone wrong???????????

Out2Late -
Welcome to the forum.
I may have answered your question here;
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=448&threadid=1161653&en terthread=y
If not, let us know, and we'll grill you for more
details.

Similar Messages

Resolve Broken Links with No Reference

I have many broken links in a webhelp project that I cannot
resolve because there is no reference. Is there a way to delete
broken links?

Hi, I have a similar problem and cannot seem to get rid of a
bunch of broken links.
Basically at some point this project file had an html
subfolder that was taken out. Consequently many topics had
html\<topicname>.htm and then became <topicname>.htm.
My problem is now that these files with the html\ folder are
under broken links and now don't reference or link to anything if I
right-click on them. I cannot restore them, delete them, or edit
them in any way.
I find that it is also creating problems when the WebHelp is
generated and put on our server, several topics give a "file not
found" error because they are searching for html\ in the filename
and of course cannot find it. I have fixed these by searching and
getting rid of any reference to \html in the topic files, but a few
still don't link properly. Even after creating a new table of
contents and re-linking all topics and images it does the same, AND
has these broken links still listed.
Any ideas? I realize this may be several problems. I think
someone in the past deleted the html folder outside of RoboHelp and
it messed everything up. We are taking about a Help file with over
700 topics, so it is a real beast to work with.
Thanks,
Joel

Can't resolve broken links

Hello everyone! I am hoping that someone will be able to assist me. I am working in RH 9 and i have received the following error when i select to resolve my broken links. "You cannot resore a topic that would be outside the project folder. Please make sure feferences are to the project folder then try restoring the topics." Can anyone assist with this error? I have checked my folders and the source and line files are in the correct folders. Thank you in advance.

Is the source topic showing in Project Manager or just Windows Explorer? If only the latter, you need to reimport it into the project first.
You also refer to "line files". What are they?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

CS3 approach; link keeps breaking between DW & FW

Hi all,
I upgraded to Creative suite 3. I used to build pages in DW
then insert images from fireworks..
but now I have adopted the creative suite approach; of
building graphics in photoshop, then exporting layers into
fireworks, slicing up the page into HTML and Images. Then exporting
FW html pages into DW.
I have found once I start playing with pages in dreamweaver,
it doesn't take long before the link is broken between FW & DW.
(Yes I am selecting the correct table layer using the DW tag
selector).
Having web pages created for you by FW is supposed to make
life easier but I find my self constantly having to start again in
FW and losing a lot of DW changes!? In FW building drop-down menus
generates their own CSS, when I add a 2nd style sheet DW gets
confused. I find centering page a real problem with CS3 FW
menus!!..
Am i missing something here? Am I alone on this? Don't
suppose you guys/girls know of any useful documents or tips??
Please help!!!

Your approach before the upgrade is the way to build
websites, I would
revert to do it the way you used to do it. Not the way your
are describing
to it now.
Dave
"BeardedFlipFlop" <[email protected]> wrote
in message
news:f6bvhe$kot$[email protected]..
> Hi all,
>
> I upgraded to Creative suite 3. I used to build pages in
DW then insert
images
> from fireworks..
> but now I have adopted the creative suite approach; of
building graphics
in
> photoshop, then exporting layers into fireworks, slicing
up the page into
HTML
> and Images. Then exporting FW html pages into DW.
>
> I have found once I start playing with pages in
dreamweaver, it doesn't
take
> long before the link is broken between FW & DW. (Yes
I am selecting the
correct
> table layer using the DW tag selector).
>
> Having web pages created for you by FW is supposed to
make life easier
but I
> find my self constantly having to start again in FW and
losing a lot of DW
> changes!? In FW building drop-down menus generates their
own CSS, when I
add a
> 2nd style sheet DW gets confused. I find centering page
a real problem
with CS3
> FW menus!!..
>
> Am i missing something here? Am I alone on this? Don't
suppose you
guys/girls
> know of any useful documents or tips??
> Please help!!!
>
>
>

RH8 fixing broken links

In RH8, I'm trying to fix broken links. I find the topics, then they move from the Broken Links folder to the correct folder but then the topic still looks like it has a broken link! Can anyone advise? here's a pic

Hello again
Unfortunately you are totally misunderstanding things. Please allow me to try and explain better.
ANY folder in your project is going to have an FPJ file inside it. This is a "behind the scenes" file that RoboHelp uses to keep track of the files that are part of the project.
In the image you provided, there are two folders in the project location with similar names:
Ranger_Help
Ranger_Help_
Only the Ranger_Help_ appears to actually be part of the project because the other folder Ranger_Help isn't appearing in the image capture showing the project inside RoboHelp. So unless something screwy happened, you should not find an FPJ file inside that folder. Then again, you may find one. It all depends on what happened.
Personally, I'd look inside the Ranger_Help folder and see if the files representing the broken links are inside. They may well be. And if so, I'd copy them to the Ranger_Help_ folder and see if that resolves things.
This project is beginning to resemble a bowl of spaghetti!
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

The broken link error

Hi,
Please help me with this broken link error in Office Excel 2010. Thank you.
The problem is: a broken link cannot be removed from the file. The link was used in data validation, which refers to a list of values. After the path was corrected, it still shows there’s a broken link. Here are the details:
I have 4 files named “000TVA_Test – 3”, “000TVA_Test – 4”, “000TVA_Test – 5”, and “000TVA_Test – 6”. The posterior files were developed based on the previous files.
In Test-3, sheet “Template “, cell “L4”, “O4”, “R4”… were built as dropdown list using data validation. The list source is in the “Library” worksheet. There’s no problem so far.
Test-4 was firstly copied from Test-3. In this file I renamed the worksheet from “Library” to “Setting” and the link was broken from here. I can also fix the broken link in this file. (While I didn’t realize there was a broken link.)
In Test-5 I fixed the path, but every time when opening the file, the broken link still shows.
In Test-6 I’ve removed the data validations. The broken link is still there.
I tried to find solutions online. I tried common methods, cannot find anything in the files is still using links. I also tried the “findlink.xla” add-in, but it only worked for Test-4, and couldn’t find the link in other files.
Please help. Thank you!
I uploaded files here: https://onedrive.live.com/redir?resid=1A97736E0ABBAA41!113&authkey=!AF5wAd9rwUPnYyE&ithint=folder%2cxlsm
Thanks again!

Hi,
Based on my tested the files downloaded, I found that Test-5 & Test-6 included the "A defined name that refers to an external workbook", Test-4 had not. (Please click Formula Tab>Name Manage, you'll see them.)
However, the Break Links command cannot break the following types of links:
A defined name that refers to an external workbook
A ListBox control with an input range that refers to an external workbook.
A DropDown control with an input range that refers to an external workbook.
http://support2.microsoft.com/kb/291984/en-us (It also applies to Excel 2010)
Thus, we'd better try the workaround： re-build the Test-5 & Test 6.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

[CS5.5/CS6] what causes a kImportAndPlaceCmdBoss to throw an exception with broken links?

I have a problem in both CS5.5 and CS6 on MacOS X.
During a drag operation onto an InDesign document, I import and place some images onto a page. This normally works without issue except in one case. The problem case is when I'm trying to import an image that is the same file path as a broken link on the document. This will crash InDesign everytime.
Let me provide some details.
First, I create an InDesign document, drag some images from the Finder and place them on the page and save the InDesign document to file. Now I go to the Finder and delete the images (or just move them to a different Folder). I then go back to InDesign and look at the Links panel where the red stop signs now appear near the images to show that the links are broken.
Next I go to a panel that I'm working on where I can drag an item from the panel and onto the InDesign document page. In this I have a ProcessDragDropCommand method that over rides the method in the CDragDropTargetFlavorHelper class, and during that method it copies the images that I just deleted back into their original locations on the file system.
After copying the files, the process then tries to import one of the images into a new frame using the PlaceFileInFrame method from the InDesign SDK file SDKLayoutHelper.cpp. This method creates a kImportAndPlaceCmdBoss and when executing the line:
if (CmdUtils::ProcessCommand(importAndPlaceCmd) != kSuccess) {
causes an exception that appears in the crash report as:
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILUE at 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
with a stack trace that points to the CmdUtils::ProcessCommand() line mentioned above.
I've tried relinking the images before the import and place, but that still doesn't work. If I break the process up so that in one drag event I copy the missing files back into place and relink them, then in a second drag event I then do an import and place it all works okay. It's just when I try the full task of copy images into place in the file system, relink the images on the InDesign document and then import and place an image in a new frame on the InDesign page that the exception is appearing.
Instead of the kImportAndPlaceCmdBoss I've also tried the kImportAndLoadPlaceGunCmdBoss with the same problem.
Interestingly, in the SDKLayoutHelper method PlaceFileInFrame that I'm using, there's a pragma message:
#pragma message("LINKREWORK: Temporary, fix this up later!")
// TODO: LINKREWORK fix.
From the wording I'm wondering if this is related to the problem that I'm seeing. In which case does anyone know what this fix might entail?
I've tried tried relinking using ReinitResource and UpdateLinks methods that are a part of the ILkniFacade but that doesn't seem to help stop the crash.
Oddly, I can generate a strange and maybe related error (that doesn't use my plugins and just the raw InDesign functionality) if I do something like:
In InDesign, create an InDesign document.
From the Finder, drag some images onto the InDesign document page.
In InDesign, save the document.
In the Finder, rename the folder containing the images.
In InDesign, check that the links really are broken with the red stop signs appearing.
In the Finder, rename the folder containing the images back to what it was before.
(Extra Step)
In the Finder, redrag the same images that you did before onto the InDesign page.
This will cause InDesign to throw up the following error message:
Either the file does not exist, you do not have permission, or the file may be in use by another application
Of course, if in the above you introduce an Extra Step where you just go back to InDesign and do nothing. InDesign will relink the once missing images, so that when you go back to the Finder to drag the images there's now no problem.
This is almost like InDesign needs a few IdleTasks in order to sort out its perception of the file system. If that's the case then I'm a bit stuck as I'm trying to do everything during a single drag operation and there's no chance of any IdleTasks occuring.
Any ideas?

I have checked the Tomcat log, which does not give
much information:
----- Root Cause -----
org.apache.artimus.message.exceptions.MessageDAOSysExce
tion: Error executing SQL in
ThreadHandler.createThread.
at
org.apache.artimus.message.dao.MySQLMessageDAO.createT
read(MySQLMessageDAO.java:54)
at
org.apache.artimus.message.ThreadHandler.insertThread(
hreadHandler.java:42)
at
org.apache.artimus.message.StoreMessage.execute(StoreM
ssage.java:61)
at
org.apache.struts.action.RequestProcessor.processActio
Perform(RequestProcessor.java:484)Tomcat has more than one log file. The servlet's System.out messages must be going to a different file if this is all you are seeing. Either look in the other log files or change the lines
         se.printStackTrace();
         throw new MessageDAOSysException("Error executing SQL in ThreadHandler.createThread."); // line 54 where the problem occurredto simply read:
        throw se;and the actual Exception you want to investigate will go in to the file where you found the above. This will be less useful in the long run as you'll have the same problem when you want to query the SQLException further with System.out.println(se.getSQLState()); etc.
You could add a logging configuration to your servlets context in server.xml so you can define where such messages get logged.
Alternatively you could use a logging API like log4j.

Help! Just copied iTunes media to second external drive and now have broken links in the original drive??

Hi everyone
I wonder if anyone can offer me some advice to rectify the problems I'm experiencing in my itunes?
I have been saving my media to an external hard drive since rebuilding my itunes collection, while keeping the library on the hard drive of my MBP. This was working well with no problems but as my media reached 300GB on my external I thought I would copy it to another external hard drive as back up, and after that I decided to also make a copy of my library data to the same second external drive so I would have a full back up of itunes in case of failure of my main hard drive...
So after copying my media from my first external drive to the second, and then copying the library data from my MBP hard drive it seems the copy of my media and the copied library are working fine on my second external hard drive, but now when I open the first external drive where I originally was saving my media files I am suffering quite a lot of broken links???...I followed the copy process as I have done in the past although I did not tick the check box for renaming and moving my media as it was about to be copied,and I thought that was correct as I used the consolidate function to copy it..
Been trying to figure out how to rectify the problem tonight and am getting nowhere fast. Can anyone offer suggestions as to how I can sort the issue on my original external hard drive as it's the one I prefer to store my media on and it was functioning perfectly before?? from having a tidy and clearly functioning itunes I now have a mass of problems....
I hope this is clear to someone.....as I was hoping to have it fixed in readiness for a new MBP...am I missing something obvious?

OK, this should sort you out...
Move the following files and folders from /Volumes/Backup/iTunes up to /Volumes/Backup/
Album Artwork (folder)
iTunes Library.itl
iTunes Library Extras.itdb
iTunes Library Genius.itdb
iTunes Library.xml
sentinel (hidden)
Launch iTunes. It should warn that the library is missing. Browse to the file /Volumes/Backup/iTunes Library.itl and open it.
Go to iTunes > Preferences > Advanced and change the media folder location to /Volumes/Backup/Music. Let iTunes consolidate files if it asks, if not use File > Library > Organize Library... Tick Consolidate files and click OK.
Close iTunes. Rename /Volumes/Backup/Music as /Volumes/Backup/iTunes Media. Start iTunes.
Go to iTunes > Preferences > Advanced, check that the media folder location now reads /Volumes/Backup/iTunes Media. If necessary, change and then close and reopen iTunes.
Go to File > Library Organize Library... and, if not greyed out, tick Rearrange files in the folder iTunes Media, then click OK.
Delete /Volumes/Backup/iTunes/iTunes Media which now contains redundant copies.
Move the following files and folders from /Volumes/Backup/ into /Volumes/Backup/iTunes
Album Artwork (folder)
iTunes Media (folder)
iTunes Library.itl
iTunes Library Extras.itdb
iTunes Library Genius.itdb
iTunes Library.xml
sentinel (hidden)
Launch iTunes. It should warn that the library is missing. Browse to the file /Volumes/Backup/iTunes/iTunes Library.itl and open it.
Go to iTunes > Preferences > Advanced, check that the media folder location now reads /Volumes/Backup/iTunes/iTunes Media. If necessary, change and then close and reopen iTunes.
Each time you change something and start iTunes just check that a track will play. If not, close iTunes and undo your last action.
That should be it. You can clone this iTunes folder to any other drive and the clone is a functioning copy of your library.
tt2

A LOT of iTunes broken links/tracks after Music folder move...

So yeah, I'm getting a TON of broken links / dead track links in iTunes after having to do two things to my iTunes install recently and I'm at wits end trying to fix it.
I keep my iTunes Music Folder on an external and share the iTunes library between my work Macbook Pro and my home Macbook. Every Friday I drag my iTunes folder and all contents from my MBP onto an external and replace the iTunes folder on the 'weekend' MB, then do the same back on Monday. I keep my iTunes music 'View' as 'Date Added' so that I can always be listening to whatever is newest. It's how I roll.
Well, this week I had some data problems during the transfer and had to use a previous week's iTunes Music Folder, which was fine as I hadn't added much this week.
I also got a new external because the old one was getting a little shady, so after doing the iTunes Music Folder replacement I moved my music all over to a new external drive, told iTunes where it all was at. iTunes did it's thing, 'organized' my stuff and all seemed good - until I got back deeper into the catalogue of music and started getting a LOT of broken tracks. The songs are still there, in the correct folders and all, but for some reason iTunes isn't finding them.
When I say a LOT, I mean so far it's hundreds of my 13,000 songs.
Now I COULD use the 'Super Remove Dead Tracks' script from Doug's to find all the broken files then re-add the whole library, but it will add all the old songs out of order because they will get a new 'Added' date.
I could also manually move thru my whole library holding down the arrow key for 'Next' to find all the broken links then go thru, select them, and use the 'iTunes Track CPR' script from Doug's to re-add them to the library with ratings intact, but still they will be out of order time-wise.
I cannot find a script that will parse my library, find broken links, and re-associate them with their tracks, nor can I figure out why this happened and any other way to fix it. Repairing permissions hasn't helped. Any other ideas?

Just to follow up with a more comprehensive example of looping through a Library to detect & repair "missing" file-tracks:
<pre>
property kErrAENoSuchObject:(-1728)
on run
tell (application "iTunes")
set theLibraryPlaylist to (first library playlist)
tell theLibraryPlaylist
set theNumCandidateFileTracks to (count (every file track))
repeat with i from 1 to theNumCandidateFileTracks by 1
-- Get a reference to this file-track
set thisFileTrackRef to (file track i)
-- Get this file-track's info (useful for debugging, etc.)
set thisArtist to (artist of thisFileTrackRef)
set thisAlbum to (album of thisFileTrackRef)
set thisName to (name of thisFileTrackRef)
set thisFileTrackInfo to (thisArtist & " > " & thisAlbum & " > " & thisName)
-- Display a diagnostic message every 500th file-track
if ((i mod 500) = 0) then
tell me
display dialog ("Checking file-track #" & i & ": " & ¬
return & return & thisFileTrackInfo) ¬
buttons {"Cancel", "•"} giving up after 2.5
end tell -- me
end if
-- Retrieve this file-track's target file (an AS 'alias' object), if any
-- {!!! NOTE: Due to a bug in iTunes 7.x+ (esp. when downloading), AS might
-- be unable to access the 'location' field of some file-tracks !!!}
try
set thisFileTrackTargetFile to (location of thisFileTrackRef)
on error errMsg2 number errNum2
-- Check whether it's that bizarre error: (-1728) "Can't get location of …"
if (errNum2 = (kErrAENoSuchObject of me)) then
-- Set up to just skip this track (assume it's being downloaded)
set thisFileTrackTargetFile to (anything) -- (Other than 'missing value')
else (* Re-signal all other errors *)
error errMsg2 number errNum2
end if
end try
-- Check whether this file-track is "missing" its target file
if (thisFileTrackTargetFile = (missing value))
-- Inform the user
tell me
display dialog ("Repairing this missing file-track: " & ¬
return & return & thisFileTrackInfo) ¬
buttons {"Cancel", "•"} giving up after 2.5
end tell -- me
-- Set up this target file's new pathname (e.g., via explicit user input, or
-- better yet automatically reconstructed from this file-track's tags such
-- as Artist, Album, Name, Kind, etc.)
-- ... Translate this file-track's kind into a filename-extension
set thisKind to (kind of thisFileTrackRef)
set thisNameExt to "m4a" -- ... Default
if ({thisKind} is in {("Protected AAC audio file")}) then -- Older DRM'd file
set thisNameExt to "m4p"
else if ({thisKind} is in {("MPEG audio file")}) then -- MP3
set thisNameExt to "mp3"
else if (thisKind contains "movie file") then -- E.g., interactive booklet
set thisNameExt to "mov"
end -- (thisKind = "MPEG audio file") ... else if ... else ...
-- ... Auto-build this target file's new pathname
set thisTargetFileNewPathname to ("New Disk:New Path:" & ¬
thisArtist & ":" & thisAlbum & ":" & thisName & "." & thisNameExt)
-- Assign this new target file (as an AS 'alias' object) to this file-track
-- (This is the crucial step that was impossible in older versions of iTunes!)
set (location of thisFileTrackRef) to (alias thisTargetFileNewPathname)
end if -- (thisFileTrackTargetFile = (missing value))
end repeat -- with i from 1 to theNumCandidateFileTracks by 1
end tell -- theLibraryPlaylist
end tell -- (application "iTunes")
end run
</pre>
Regards,
--P

Preview Pane and broken link issues in CS2 for Mac. Please help!

I posted this a few days ago - but would love to have some insight on how we can resolve this issue
When I am working on html documents, both old and new, I have lost all of the 'preview pane' buttons.
I can still see and have access to the layout and source panes, but the two preview (pdf and regular) are missing.
In the body of the editor all of the images that were there now show just a broken link image (but when you save and go to view the file in a browser all changes and updates are there. The source shows all of the right info and links
Also when you place a new image - the image icon doesn't show the image or even change to the proper size that the image is. You have to do that manually and then still only shows a broken icon in the new size.
Has anyone seen this before? Did I accidentally altered a mode in GoLive....is there a way to fix it?
Thanks!!!

When you have ADE (digital editions) open with "bookshelves" page with a "Getting Started with Adobe Digital Editions" booklet in it,
enter cmd-shift-U, or menu/Help/Authorize Computer.
That will ask for your Adobe ID and password and authorize the computer.
Once that has been done you shouldn't need to do it again.
Sometimes you do need to if things go wrong, but you certainly shouldn't have to do it at all regularly.
When that has been done, plug in the Kobo; it should show up in the left pane of ADE.
Use "menu/Help/Authorize Device" and that will authorize your Kobo with the Adobe ID from the Mac.
You can then copy books by drag-dropping onto the Kobo within ADE

Since the last update to iTunes 11.0.3 (42) the airplay connection is not working properly , keeping breaking up

since the last update to iTunes 11.0.3 (42) the airplay connection is not working properly , keeping breaking up, while the airplay works fine with my iPad and iPhone. Anyone has experienced the same? any fix available?

Hi Erdelestre,
Thanks for visiting Apple Support Communities!
See this article for some tips about troubleshooting AirPlay:
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
Troubleshooting performance issues with AirPlay or AirPlay Mirroring
If you are experiencing intermittent playback or significant network lag with AirPlay or AirPlay Mirroring, it could be due to a weak Wi-Fi connection, interference, or the distance between the Wi-Fi router and your iOS device, Apple TV or AirPort Express. Try the following suggestions:
Ensure that other devices are not trying to stream to the same Apple TV at the same time.
Turn off Bluetooth on your iOS device by tapping Settings > General > Bluetooth.
Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
If possible, try to locate your Wi-Fi router in the same room as your Apple TV and iPhone/iPad.
If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
If the Wi-Fi router has an external antenna, check to see that is it connected properly and in good condition.
Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
Best,
Jeremy

When I open iTunes on my new computer using the .itl file, and using the same external drive holding the songs, all of the songs I added to iTunes up to a certain date have broken links, while none of the songs have broken links on the old computer.

I want to open the iTunes library on my new laptop with all the playlists and stuff I built on the old computer. I have all my music on an external drive. I have copied the .itl file from the old computer and opened it on the laptop, and it has all the playlists, but all of the songs that were added to iTunes up to a certain date have broken links. What am I doing wrong?

Moving library files around while leaving the data in the same place usually presents no problems. Moving the data around independently from the library usually breaks things. With Windows machines all you should need to do is make sure that the same drive letter is being used on the new system as with the old. If that is not possible you need to get your library into a portable layout before moving it between systems.
Typical layout of iTunes folders:
When the media folder is inside the main iTunes folder as shown above then the library is portable. Typically with a split library the iTunes Music or iTunes Media folder (everything inside the red outline) is moved to a different drive by choosing a new locaton for it and then consolidating.
To make the library portable again you need to copy the library files and album artwork folder into the parent folder of the media folder so that the nested relationship is recreated. (BTW If your media isn't already inside your designated media folder then you will also need to consolidate the files that are outside of it, before you copy the library files.) You can then use the hold-down-shift-when-starting-iTunes method to open the library file in that parent folder. Once the library has been opened, tested and closed you are most of the way there.
The iTunes window inherits its title from the folder holding the library files so, unless you created a folder called iTunes to hold the media folder, iTunes may now have an unexpected title when you run it. The parent folder can be renamed as iTunes, and the library opened again. Alternatively, if the parent folder is at the root of the drive, or has other data which you wish to leave in place, you can create a new top level folder called iTunes and move the library files, album artwork and media folders into it before opening and testing the library again.
If the library doesn't work after any step simply reverse it by undoing a move or rename or opening the previous set iTunes Library.itl file.
If all has gone well then the library is now portable. Once you've migrated the data to a new system you can copy the library files back to their usual internal location if you find that having them on the external drive affects performance...
tt2

Broken links to database stored gif's

I installed 9i AS 1.0.2 for NT and immediately after that the hlw-tutorial files. Now some (not all) links are broken, e.g. in the hlw navigation bar the link to the "home" (http://servername/pls/portal30/docs/249.gif). The file 249.gif is stored in wwdoc_document$ with a pathid of 209. As I didn't find an appropriate table in user_tab_columns resolving the pathid: does anyone know where this pathid is resolved or - even better - what the cause of that error is?
Thanks in advance
Klaus

I have the same problem. Without any known reasons the links to many items are broken. These are not only gif-images but all items which are created or linked in a content area. When i click on such a broken link-item the following error-message appears:
Invalid name
DAD name: portal30
PROCEDURE :
URL : http://mypc:80/pls/portal30/docs/470.gif
PARAMETERS :
===========
ENVIRONMENT:
============
PLSQL_GATEWAY=WebDb
GATEWAY_IVERSION=2
SERVER_SOFTWARE=Apache/1.3.12 (Win32) ApacheJServ/1.1 mod_ssl/2.6.4 OpenSSL/0.9.5a mod_perl/1.22
GATEWAY_INTERFACE=CGI/1.1
SERVER_PORT=80
Who knows the reason for this problem ? Can anybody help ?

Dreamweaver 8 - Problematic Broken Link Check

On a regular basis I use Dreamweaver 8's broken link checker
to convert
relative links to absolute throughout single HTML files.
Once upon a time, I could use the results pane to quickly
replace all
of the broken links. Ever since installing Dreamweaver 8
(upgraded from
MX) I've had the following problem with the link checker:
1. It seems to find all of the broken links correctly,
however, when I
try to change them into absolute, it doesn't actually make
the changes.
2. Sometimes it even makes incorrect changes to the path of
the link,
such as changing the image link to a .html link randomly (I
have no
idea how this happens!)
3. When it asks if I'd like to replace the other references
to the same
file, and I respond yes, it does nothing.
After researching this topic somewhat, I have found temporary
solution,
but it's driving me crazy and I'm looking for a long-term
resolution
for this issue.
If I delete my WinFileCache-xxxxxx.dat file (under User >
Application
Data > Macromedia > Dreamweaver 8 > Configuration)
before opening
Dreamweaver, the problem is resolved until the end of that
specific
session. As soon as I close Dreamweaver and reopen it, the
problem
returns.
I understand that by deleting the WinFileCache file I am
basically
starting with a clean slate, which is why this method is
temporarily
effective. However, this is a daily problem for me and I'm
sick of
having to do it every single time I use the program....
SO...if any of you have any thoughts, suggestions, or similar
complaints, please share - I'm desperate to find a long-term
solution!
Thanks!

> On a regular basis I use Dreamweaver 8's broken link
checker to convert
> relative links to absolute throughout single HTML files.
Why?
> 1. It seems to find all of the broken links correctly,
however, when I
> try to change them into absolute, it doesn't actually
make the changes.
Give me an example of what it finds and what you want to
change it to,
please.
> 2. Sometimes it even makes incorrect changes to the path
of the link,
> such as changing the image link to a .html link randomly
(I have no
> idea how this happens!)
I would have to see this happen to believe it.
> SO...if any of you have any thoughts, suggestions, or
similar
> complaints, please share - I'm desperate to find a
long-term solution!
The real question is - why are you regularly getting broken
links? The only
reason I can think of is that your local site is actually on
a remote,
shared network drive, and there is intermittant connectivity
to it due to
some recurring network anomaly. Can you tell me how your site
is defined?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"pooley2" <[email protected]> wrote in
message
news:[email protected]...
> On a regular basis I use Dreamweaver 8's broken link
checker to convert
> relative links to absolute throughout single HTML files.
>
> Once upon a time, I could use the results pane to
quickly replace all
> of the broken links. Ever since installing Dreamweaver 8
(upgraded from
> MX) I've had the following problem with the link
checker:
>
> 1. It seems to find all of the broken links correctly,
however, when I
> try to change them into absolute, it doesn't actually
make the changes.
>
> 2. Sometimes it even makes incorrect changes to the path
of the link,
> such as changing the image link to a .html link randomly
(I have no
> idea how this happens!)
>
> 3. When it asks if I'd like to replace the other
references to the same
> file, and I respond yes, it does nothing.
>
> After researching this topic somewhat, I have found
temporary solution,
> but it's driving me crazy and I'm looking for a
long-term resolution
> for this issue.
>
> If I delete my WinFileCache-xxxxxx.dat file (under User
> Application
> Data > Macromedia > Dreamweaver 8 >
Configuration) before opening
> Dreamweaver, the problem is resolved until the end of
that specific
> session. As soon as I close Dreamweaver and reopen it,
the problem
> returns.
>
> I understand that by deleting the WinFileCache file I am
basically
> starting with a clean slate, which is why this method is
temporarily
> effective. However, this is a daily problem for me and
I'm sick of
> having to do it every single time I use the program....
>
> SO...if any of you have any thoughts, suggestions, or
similar
> complaints, please share - I'm desperate to find a
long-term solution!
>
> Thanks!
>

Is there an automated way to fix broken links?

I've been revising a large online Help system. I've added
many new topics. I've deleted topics. I've changed topic names of
topics already in place. As a result, the system has many broken
links. Is there an automated way, or a utilility, to fix these
links? This is a very large help system.
I'm using X5 (WebHelp).
Feel free to answer via email, and thanks!

When you delete RH offers to fix the links to that topic. If
you did not take that option then you can only fix it manually. Did
you perhaps delete outside of RH?
I don't see how adding a new topic can break a link as
nothing links to it until you create the links.

Resolved Broken Links keep breaking

Similar Messages

Maybe you are looking for