RESOLVED On Premises (intranet use only) Exchange Certificate Help (Please)!
I apologize in advance for what may end up being a very silly issue.
I have racked my brain and read and searched and I still can't seem to find the answer to my question.
I have an in house Exchange server that is only accessible internally. We do not have external clients (laptops/tablets/etc) and all computers stay on premises. Most of our clients use OWA to access email. Everything has been working fine up until about
2 weeks ago when everybody started getting a certificate error. I have tried every thing I can find to fix this issue to no avail. It seems the thumbprint of the certificate is different each time I visit the exchange server (https://exchange/owa). So I can
install the certificate which works for a few minutes and then it prompts me again. When looking at the thumb print of each instance, everything seems to be exactly the same with the exception of the thumbprint.
My first question, is do I still need to go through a CA even though this server is not accessible via external IP?
Where are my clients getting the certificate they are trying to install because they do not match the certificate that is installed on the Exchange Server.
Thank you in advance for anybody that can steer me in the right direction to getting this resolved.
I support this site remotely so any additional info can be provided but there might be a small delay.
First, thank you for taking the time to respond.
"I'm going to assume that you have some sort of PKI infrastructure with in your environment."
I'm not sure I do. This project landed in my lap a few years ago. This particular client is my only client
with exchange. I have limped my way though to this point but I'm afraid I'm just not clear on what it is I actually need.
We are running Exchange 2013 on a Server 2008 box. Everything worked fine up until about 2 weeks ago. I have no idea what changed.
I think my biggest problem is my lack of understanding of where the client is pulling the certificate when I access the intranet site. I don't understand why the certificate (whether valid or not) isn't matching the certificate within IIS/Exchange admin.
Hi,
I think you can check your certificate information and provide the information here for more help. Please run the following command in Exchange Management Shell:
Get-ExchangeCertificate | fl
Additionally, since the certificate issue occurs when accessing Exchange server from OWA, please check the OWA configuration in your Exchange:
Get-OwaVirtualDirectory | FL Identity,*Authentication*,*url*
Generally, the namespace used in the OWA URL should be included in the Exchange certificate which is assigned with IIS service.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support
Similar Messages
-
I have an iphone bought in the UK but I'm in Europe and can not use it I need help please help me thanks
wiliiam rrichard wrote:
Because My iphone is Locked on the United Kingdom
No it is not. iPhones, like all cell phones are not locked to countries. They are locked to carriers.
Only the carrier to whom the device is locked can unlock it. Contact the carrier. -
EXFAT formatted USB stick - sharing permissions wrong - Read Only - Cannot Reformat - Help please!
Hi.
Having various problems with a USB stick that is formatted in EX-FAT.
It was working fine for a long period.
Yesterday I lent it to a friend to put some things on it.
Now when I try and work on it, I get messages like this.
Mac OS X can’t repair the disk “Disk Name"
You can still open or copy files on the disk, but you can’t save changes to files on the disk. Back up the disk and reformat it as soon as you can.
It will also randomly eject the drive.
I have tried to reformat it multiple times, in mac and windows.
[I have never used it in windows previous to this occasion of needing to reformat].
In windows, it crashes the disk when I attempt to format with disk manager [I attempted this due to advice in an internet article].
In Mac , I cannot even try to reformat it, because for some reason the permissions on the USB stick have been set to "read only" and I cannot find any way to change them to read-write, or full permissions, or whatever is appropriate.
I have tried "erase" disk in disk utility. I know how to do a full reformat, but it simply will not allow me to do so.
All the options are greyed out.
Does anybody have any information or links they can point me to?
I've been searching around.
Thanks very much in advance for any advice received.
Running latest mountain lion , 10.8.4, and windows 7 through VMware fusion.Start over:
select the drive > select the Partition tab > select 1 Partition
select Option > select GUID Partition Table > select OK
name it > click the Apply button > then lastly click Partition -
Problem with RAM and slowing of computer when using CS5 can anyone help please?
Hello I am having big problems at the moment with a slow computer when I am using Photoshop CS5 I am informed that I am low on memory. I do not store any photographs on my computer they are all on an external hard drive, the only image on the computer are the ones I am working with. I have been in touch with Norton who think it is an Adobe issue can anyone help please, looking forward to hearing from you and to a swift fix of the problem
Best wishes
SheilaHow much memory do you have installed, and what operating system are you running?
Mark -
I cannot use FaceTime on my Macbook air but can using my iPhone - any help please?
Cannot use FaceTime on my Macbook Air but can connect using my iPhone - any help appreciated.
Any error message?
-
I only ever activated one license for cs5 mac. Stuck using PC now. Help please.
Now I'm using a Wacom companion, and forced to operate windows on it. Isn't there something I can do or someone I can talk to in order to gain access on both operating systems?
A CS5 mac license is only for a Mac and cannot be exchanged for a PC. One way out is to upgrade for $200 to CS6 and order a free Platform swap to PC.
A better way is Creative Cloud Photography plan | Adobe Creative Cloud
You get Photoshop as part of the deal and can move between PC and Mac as much as you like. $10 monthly or $120 annual. All future upgrades and versions part of the deal. -
Hi, I got a serious problem with my iCloud account. Beside the fact that I bought extra storage up to 55 GB my account is always full and I deleted everything except my photos 2,1 GB, That's all I got and if I want to take photo or anything it would say memory full !!! Please help me solve this problem asap
Hello mate ! Thanks for your reply. However if you take a look at this screen shot you'll see I have nothing more then a few photos (2.1 GB) and 2 tiny little apps but the memory still looks filled up... with air in my opinion. Maybe you got another suggestion . Thanks a lot my friend
-
BAD Command Argument Error. 11 writing to Exchange 2007 - Help Please...
Hi,
I am writing an IMAP to IMAP mailbox converter. I am testing a UW mailbox that I have approx. 1200 messages in to a MS Exchange 2007 Server. I am performing a javax.mail.Folder destFolder.appendMessages(sourceFolder.getMessages()). I transfer almost half the messages this why when i get the following exception. I have googled and not found any reference to it, nor does the protocol trace look bazaar :
javax.mail.MessagingException: A4 BAD Command Argument Error. 11;
nested exception is:
com.sun.mail.iap.BadCommandException: A4 BAD Command Argument Error. 11
at com.sun.mail.imap.IMAPFolder.doCommand(IMAPFolder.java:2337)
at com.sun.mail.imap.IMAPFolder.appendMessages(IMAPFolder.java:1289)
at edu.yale.its.tp.email.conversion.IMAPConverter.copyMessages(IMAPConverter.java:83)
at edu.yale.its.tp.email.conversion.IMAPConverter.copyFolder(IMAPConverter.java:75)
at edu.yale.its.tp.email.conversion.IMAPConverter.convert(IMAPConverter.java:36)
at edu.yale.its.tp.email.conversion.IMAPConverter.start(IMAPConverter.java:27)
at edu.yale.its.tp.email.conversion.IMAPConverter.main(IMAPConverter.java:16)
Caused by: com.sun.mail.iap.BadCommandException: A4 BAD Command Argument Error. 11
at com.sun.mail.iap.Protocol.handleResult(Protocol.java:296)
at com.sun.mail.imap.protocol.IMAPProtocol.appenduid(IMAPProtocol.java:881)
at com.sun.mail.imap.protocol.IMAPProtocol.append(IMAPProtocol.java:835)
at com.sun.mail.imap.IMAPFolder$10.doCommand(IMAPFolder.java:1292)
at com.sun.mail.imap.IMAPFolder.doProtocolCommand(IMAPFolder.java:2377)
at com.sun.mail.imap.IMAPFolder.doCommand(IMAPFolder.java:2332)
... 6 more
Here is the protocol trace...
0 [main] INFO - start Conversion
DEBUG: JavaMail version 1.4ea
DEBUG: java.io.FileNotFoundException: /usr/java/jdk1.5.0_11/jre/lib/javamail.providers (No such file or directory)
DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/imap.jar!/META-INF/javamail.providers
DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/imap.jar!/META-INF/javamail.providers
DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/pop3.jar!/META-INF/javamail.providers
DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/pop3.jar!/META-INF/javamail.providers
DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.providers
DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.providers
DEBUG: successfully loaded resource: /META-INF/javamail.default.providers
DEBUG: Tables of loaded providers
DEBUG: Providers Listed By Class Name: {com.sun.mail.smtp.SMTPSSLTransport=javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc], com.sun.mail.smtp.SMTPTransport=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc], com.sun.mail.imap.IMAPSSLStore=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], com.sun.mail.pop3.POP3SSLStore=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun Microsystems, Inc], com.sun.mail.imap.IMAPStore=javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], com.sun.mail.pop3.POP3Store=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsystems, Inc]}
DEBUG: Providers Listed By Protocol: {imaps=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], imap=javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], smtps=javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc], pop3=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsy stems, Inc], smtp=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc], pop3s=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun Microsystems, Inc]}
DEBUG: successfully loaded resource: /META-INF/javamail.default.address.map
DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.address.map
DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.address.map
DEBUG: java.io.FileNotFoundException: /usr/java/jdk1.5.0_11/jre/lib/javamail.address.map (No such file or directory)
DEBUG: getProvider() returning javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc]
DEBUG: mail.imap.partialfetch: false
* OK [CAPABILITY IMAP4REV1 LOGIN-REFERRALS AUTH=PLAIN AUTH=LOGIN] pantheon-po09.its.yale.edu IMAP4rev1 2002.336 at Fri, 21 Sep 2007 09:34:04 -0400 (EDT)
IMAP DEBUG: AUTH: PLAIN
IMAP DEBUG: AUTH: LOGIN
A0 CAPABILITY
* CAPABILITY IMAP4REV1 IDLE NAMESPACE MAILBOX-REFERRALS BINARY SCAN SORT THREAD=REFERENCES THREAD=ORDEREDSUBJECT MULTIAPPEND LOGIN-REFERRALS AUTH=PLAIN AUTH=LOGIN
A0 OK CAPABILITY completed
IMAP DEBUG: AUTH: PLAIN
IMAP DEBUG: AUTH: LOGIN
DEBUG: protocolConnect login, host=pantheon-po09.its.yale.edu, user=jjv6, password=<non-null>
A1 AUTHENTICATE PLAIN
+
+*<----REMOVED---->*+
A1 OK [CAPABILITY IMAP4REV1 IDLE NAMESPACE MAILBOX-REFERRALS BINARY SCAN SORT THREAD=REFERENCES THREAD=ORDEREDSUBJECT MULTIAPPEND] User jjv6 authenticated
DEBUG: JavaMail version 1.4ea
DEBUG: java.io.FileNotFoundException: /usr/java/jdk1.5.0_11/jre/lib/javamail.providers (No such file or directory)
DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/imap.jar!/META-INF/javamail.providers
DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/imap.jar!/META-INF/javamail.providers
DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/pop3.jar!/META-INF/javamail.providers
DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/pop3.jar!/META-INF/javamail.providers
DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.providers
DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.providers
DEBUG: successfully loaded resource: /META-INF/javamail.default.providers
DEBUG: Tables of loaded providers
DEBUG: Providers Listed By Class Name: {com.sun.mail.smtp.SMTPSSLTransport=javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc], com.sun.mail.smtp.SMTPTransport=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc], com.sun.mail.imap.IMAPSSLStore=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], com.sun.mail.pop3.POP3SSLStore=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun Microsystems, Inc], com.sun.mail.imap.IMAPStore=javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], com.sun.mail.pop3.POP3Store=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsystems, Inc]}
DEBUG: Providers Listed By Protocol: {imaps=javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc], imap=javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc], smtps=javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc], pop3=javax.mail.Provider[STORE,pop3,com.sun.mail.pop3.POP3Store,Sun Microsy stems, Inc], smtp=javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc], pop3s=javax.mail.Provider[STORE,pop3s,com.sun.mail.pop3.POP3SSLStore,Sun Microsystems, Inc]}
DEBUG: successfully loaded resource: /META-INF/javamail.default.address.map
DEBUG: URL jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.address.map
DEBUG: successfully loaded resource: jar:file:/usr/local/java-apis/javamail/javamail-1.4/lib/smtp.jar!/META-INF/javamail.address.map
DEBUG: java.io.FileNotFoundException: /usr/java/jdk1.5.0_11/jre/lib/javamail.address.map (No such file or directory)
DEBUG: getProvider() returning javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc]
DEBUG: mail.imap.partialfetch: false
* OK Microsoft Exchange Server 2007 IMAP4 service ready
A0 CAPABILITY
* CAPABILITY IMAP4 IMAP4rev1 AUTH=NTLM AUTH=GSSAPI IDLE NAMESPACE LITERAL+
A0 OK CAPABILITY completed.
IMAP DEBUG: AUTH: NTLM
IMAP DEBUG: AUTH: GSSAPI
DEBUG: protocolConnect login, host=connect.yale.edu, user=jjv6, password=<non-null>
A1 LOGIN +*<----Removed---->*+
A1 OK LOGIN completed.
A2 LIST "" "Sakai-Dev List"
* LIST (\HasNoChildren) "/" "Sakai-Dev List"
A2 OK LIST completed.
DEBUG: connection available -- size: 1
A2 EXAMINE "Sakai-Dev List"
* 1206 EXISTS
* 2 RECENT
* OK [UIDVALIDITY 1151671867] UID validity status
* OK [UIDNEXT 11497] Predicted next UID
* FLAGS (Junk NonJunk $Label5 $Label1 $Label2 $Label3 $Label4 $MDNSent \Answered \Flagged \Deleted \Draft \Seen)
* OK [PERMANENTFLAGS ()] Permanent flags
* OK [UNSEEN 8] first unseen message in /imap/j/jjv6/Sakai-Dev List
A2 OK [READ-ONLY] EXAMINE completed
DEBUG: connection available -- size: 1
A3 SELECT "Sakai-Dev List"
* 524 EXISTS
* 0 RECENT
* FLAGS (\Seen \Answered \Flagged \Deleted \Draft $MDNSent)
* OK [PERMANENTFLAGS (\Seen \Answered \Flagged \Deleted \Draft $MDNSent)] Permanent flags
* OK [UIDVALIDITY 13758] UIDVALIDITY value
* OK [UIDNEXT 525] The next unique identifier value
A3 OK [READ-WRITE] SELECT completed.
A3 LIST "" "Sakai-Dev List"
* LIST (\NoInferiors \UnMarked) "/" "Sakai-Dev List"
A3 OK LIST completed
3080 [main] DEBUG - Source Messages : 1206
3080 [main] DEBUG - Dest Messages : 524
3080 [main] DEBUG - Copying 1206 Messages
A4 FETCH 1 (ENVELOPE INTERNALDATE RFC822.SIZE)
* 1 FETCH (ENVELOPE ("Tue, 21 Aug 2007 13:35:23 -0700 (PDT)" "Re: Sakai portlet problem in uPortal" (("Onur Sirin" NIL "onursirin" "sabanciuniv.edu")) (("Onur Sirin" NIL "onursirin" "sabanciuniv.edu")) (("Onur Sirin" NIL "onursirin" "sabanciuniv.edu")) ((NIL NIL "sakai-dev" "collab.sakaiproject.org")) NIL NIL "<[email protected]>" "<[email protected]>") INTERNALDATE "21-Aug-2007 16:37:20 -0400" RFC822.SIZE 7024)
A4 OK FETCH completed
A5 FETCH 1 (BODY[])
* 1 FETCH (BODY[] {7024}
Received: from mr4.its.yale.edu (mr4.its.yale.edu [130.132.50.10])
by pantheon-po09.its.yale.edu (8.12.11.20060308/8.12.11) with ESMTP id l7LKbJRC006741
(version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT);
Tue, 21 Aug 2007 16:37:19 -0400
Received: from paploo.uhi.ac.uk (app1.prod.collab.uhi.ac.uk [194.35.219.184])
by mr4.its.yale.edu (8.12.11.20060308/8.12.11) with ESMTP id l7LKbH3b030903;
Tue, 21 Aug 2007 16:37:18 -0400
Received: from paploo.uhi.ac.uk (localhost [127.0.0.1])
by paploo.uhi.ac.uk (Postfix) with ESMTP id 7F70050E80;
Tue, 21 Aug 2007 20:54:16 +0100 (BST)
Message-ID: <[email protected]>
Mime-Version: 1.0
Content-Transfer-Encoding: 7bit
Received: from prod.collab.uhi.ac.uk ([194.35.219.182])
by paploo.uhi.ac.uk (JAMES SMTP Server 2.1.3) with SMTP ID 665
for <[email protected]>;
Tue, 21 Aug 2007 20:53:07 +0100 (BST)
Received: from kuber.nabble.com (kuber.nabble.com [216.139.236.158])
by shmi.uhi.ac.uk (Postfix) with ESMTP id 347909F12
for <[email protected]>; Tue, 21 Aug 2007 21:35:26 +0100 (BST)
Received: from isper.nabble.com ([192.168.236.156])
by kuber.nabble.com with esmtp (Exim 4.63)
(envelope-from <[email protected]>)
id 1INaRf-0004yq-5U
for [email protected]; Tue, 21 Aug 2007 13:35:23 -0700
Date: Tue, 21 Aug 2007 13:35:23 -0700 (PDT)
From: Onur Sirin <[email protected]>
To: [email protected]
Subject: Re: Sakai portlet problem in uPortal
In-Reply-To: <[email protected]>
X-Content-Type-Outer-Envelope: text/plain; charset=us-ascii
X-Nabble-From: [email protected]
References: <[email protected]> <[email protected]>
X-Content-Type-Message-Body: text/plain; charset=us-ascii
Content-Type: text/plain; charset=us-ascii
X-YaleITSMailFilter: Version 1.2c (attachment(s) not renamed)
X-Yale-Not-Spam: For more info see: http://www.yale.edu/email/spam/content.html
X-Yale-Spam-Score: (0)
X-Yale-Filter-Score: 0
X-Scanned-By: MIMEDefang 2.52 on 130.132.50.10
Hi Charles,
I used a portlet you created first but not in trunk. (as sakai-dash.war
file) This might be older one.
From catalina.out i get following logs.First, as always i get:
WARN: Shared Segment file is missing
/home/sakai/tomcat/sakai/sharedsegments/1187722277361.zip (2007-08-21
23:02:38,279
SearchBuilder_0_org.sakaiproject.search.index.impl.JDBCClusterIndexStore)
ERROR: There has been a major poblem with the Search Index which has become
corrupted (2007-08-21 23:02:38,285
SearchBuilder_0_org.sakaiproject.search.index.impl.ClusterFSIndexStorage)
java.io.IOException: No Index available to open
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexReader(ClusterFSIndexStorage.java:211)
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexSearcher(ClusterFSIndexStorage.java:288)
at
org.sakaiproject.search.index.impl.SearchIndexStorage.getIndexSearcher(SearchIndexStorage.java:97)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.getIndexSearcher(SearchServiceImpl.java:554)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.reload(SearchServiceImpl.java:451)
at
org.sakaiproject.search.component.service.impl.SearchIndexBuilderWorkerImpl.run(SearchIndexBuilderWorkerImpl.java:485)
at java.lang.Thread.run(Thread.java:595)
WARN: Shared Segment file is missing
/home/sakai/tomcat/sakai/sharedsegments/1187722277361.zip (2007-08-21
23:02:38,460
SearchBuilder_1_org.sakaiproject.search.index.impl.JDBCClusterIndexStore)
ERROR: There has been a major poblem with the Search Index which has become
corrupted (2007-08-21 23:02:38,466
SearchBuilder_1_org.sakaiproject.search.index.impl.ClusterFSIndexStorage)
java.io.IOException: No Index available to open
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexReader(ClusterFSIndexStorage.java:211)
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexSearcher(ClusterFSIndexStorage.java:288)
at
org.sakaiproject.search.index.impl.SearchIndexStorage.getIndexSearcher(SearchIndexStorage.java:97)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.getIndexSearcher(SearchServiceImpl.java:554)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.reload(SearchServiceImpl.java:451)
at
org.sakaiproject.search.component.service.impl.SearchIndexBuilderWorkerImpl.run(SearchIndexBuilderWorkerImpl.java:485)
at java.lang.Thread.run(Thread.java:595)
I don't know what it is. !!!
And then, when i logged into portal, i get the following message:
SakaiPortalLogin.loginAndCreate id=onursirin pw=plugh-xyzzy sec=plugh-xyzzy
fn=Onur ln=Sirin [email protected] ip=10.4.3.1
Site exists...~onursirin
That's all what i see in catalina.out.
By the way, we are using Cisco CSS (Content Switch) for Load Balancing
process.
Behind CSS, there is apache server and application server installed on two
servers which mentioned in this page
http://confluence.sakaiproject.org/confluence/display/DOC/Sakai+2.4+Admin+Guide+-LoadBalancing+and+Scaling
http://confluence.sakaiproject.org/confluence/display/DOC/Sakai+2.4+Admin+Guide+-LoadBalancing+and+Scaling
as thin client .
CSS DNS address = sucourse.sabanciuniv.edu
App server DNS address = sakws1.sabanciuniv.edu and sakws2.sabanciuniv.edu
It is enough to type sucourse.sabanciuniv.edu address in web browser.
Their sakai.properties files are similar. However, there are following
parameters that i didn't use in my sakai.properties file. May be i should
use them. !!
[email protected]
[email protected]
[email protected]
Now, i have changed my connection type by connecting Campus VPN server with
Checkpoint VPN client, i got my sakai course pages correctly via sakai
portlet. However, in campus i had same problem today.
So, like i said, the situation is changing due to unknown reason.
From portlet, i clicked on any course, i get blank screen with followingaddress in web browser address bar.
https://sucourse.sabanciuniv.edu/sakai-login-tool/container?sakai.session=02274ca6-fc19-413c-80d9-4332ae4e4499&ticket=ST-5342-bLIfR5lVs29HB1ZAeRrMA3bbmQtVWRJqQ6N-20
That's all.
Thank you for your response Charles !
Regards
Charles Severance wrote:
View this message in context: http://www.nabble.com/Sakai-portlet-problem-in-uPortal-tf4304476.html#a12262587
Sent from the Sakai - Development mailing list archive at Nabble.com.
This automatic notification message was sent by Sakai Collab (https://collab.sakaiproject.org/portal) from the DG: Development (a.k.a. sakai-dev) site.
You can modify how you receive notifications at My Workspace > Preferences.
A5 OK FETCH completed
A6 FETCH 1 (FLAGS)
* 1 FETCH (FLAGS (\Seen \Deleted NonJunk))
A6 OK FETCH completed
A4 APPEND "Sakai-Dev List" (\Deleted \Seen NonJunk) "21-Aug-2007 16:37:20 -0400" {7024+}
A7 FETCH 1 (BODY[])
* 1 FETCH (BODY[] {7024}
Received: from mr4.its.yale.edu (mr4.its.yale.edu [130.132.50.10])
by pantheon-po09.its.yale.edu (8.12.11.20060308/8.12.11) with ESMTP id l7LKbJRC006741
(version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT);
Tue, 21 Aug 2007 16:37:19 -0400
Received: from paploo.uhi.ac.uk (app1.prod.collab.uhi.ac.uk [194.35.219.184])
by mr4.its.yale.edu (8.12.11.20060308/8.12.11) with ESMTP id l7LKbH3b030903;
Tue, 21 Aug 2007 16:37:18 -0400
Received: from paploo.uhi.ac.uk (localhost [127.0.0.1])
by paploo.uhi.ac.uk (Postfix) with ESMTP id 7F70050E80;
Tue, 21 Aug 2007 20:54:16 +0100 (BST)
Message-ID: <[email protected]>
Mime-Version: 1.0
Content-Transfer-Encoding: 7bit
Received: from prod.collab.uhi.ac.uk ([194.35.219.182])
by paploo.uhi.ac.uk (JAMES SMTP Server 2.1.3) with SMTP ID 665
for <[email protected]>;
Tue, 21 Aug 2007 20:53:07 +0100 (BST)
Received: from kuber.nabble.com (kuber.nabble.com [216.139.236.158])
by shmi.uhi.ac.uk (Postfix) with ESMTP id 347909F12
for <[email protected]>; Tue, 21 Aug 2007 21:35:26 +0100 (BST)
Received: from isper.nabble.com ([192.168.236.156])
by kuber.nabble.com with esmtp (Exim 4.63)
(envelope-from <[email protected]>)
id 1INaRf-0004yq-5U
for [email protected]; Tue, 21 Aug 2007 13:35:23 -0700
Date: Tue, 21 Aug 2007 13:35:23 -0700 (PDT)
From: Onur Sirin <[email protected]>
To: [email protected]
Subject: Re: Sakai portlet problem in uPortal
In-Reply-To: <[email protected]>
X-Content-Type-Outer-Envelope: text/plain; charset=us-ascii
X-Nabble-From: [email protected]
References: <[email protected]> <[email protected]>
X-Content-Type-Message-Body: text/plain; charset=us-ascii
Content-Type: text/plain; charset=us-ascii
X-YaleITSMailFilter: Version 1.2c (attachment(s) not renamed)
X-Yale-Not-Spam: For more info see: http://www.yale.edu/email/spam/content.html
X-Yale-Spam-Score: (0)
X-Yale-Filter-Score: 0
X-Scanned-By: MIMEDefang 2.52 on 130.132.50.10
Hi Charles,
I used a portlet you created first but not in trunk. (as sakai-dash.war
file) This might be older one.
From catalina.out i get following logs.First, as always i get:
WARN: Shared Segment file is missing
/home/sakai/tomcat/sakai/sharedsegments/1187722277361.zip (2007-08-21
23:02:38,279
SearchBuilder_0_org.sakaiproject.search.index.impl.JDBCClusterIndexStore)
ERROR: There has been a major poblem with the Search Index which has become
corrupted (2007-08-21 23:02:38,285
SearchBuilder_0_org.sakaiproject.search.index.impl.ClusterFSIndexStorage)
java.io.IOException: No Index available to open
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexReader(ClusterFSIndexStorage.java:211)
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexSearcher(ClusterFSIndexStorage.java:288)
at
org.sakaiproject.search.index.impl.SearchIndexStorage.getIndexSearcher(SearchIndexStorage.java:97)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.getIndexSearcher(SearchServiceImpl.java:554)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.reload(SearchServiceImpl.java:451)
at
org.sakaiproject.search.component.service.impl.SearchIndexBuilderWorkerImpl.run(SearchIndexBuilderWorkerImpl.java:485)
at java.lang.Thread.run(Thread.java:595)
WARN: Shared Segment file is missing
/home/sakai/tomcat/sakai/sharedsegments/1187722277361.zip (2007-08-21
23:02:38,460
SearchBuilder_1_org.sakaiproject.search.index.impl.JDBCClusterIndexStore)
ERROR: There has been a major poblem with the Search Index which has become
corrupted (2007-08-21 23:02:38,466
SearchBuilder_1_org.sakaiproject.search.index.impl.ClusterFSIndexStorage)
java.io.IOException: No Index available to open
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexReader(ClusterFSIndexStorage.java:211)
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexSearcher(ClusterFSIndexStorage.java:288)
at
org.sakaiproject.search.index.impl.SearchIndexStorage.getIndexSearcher(SearchIndexStorage.java:97)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.getIndexSearcher(SearchServiceImpl.java:554)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.reload(SearchServiceImpl.java:451)
at
org.sakaiproject.search.component.service.impl.SearchIndexBuilderWorkerImpl.run(SearchIndexBuilderWorkerImpl.java:485)
at java.lang.Thread.run(Thread.java:595)
I don't know what it is. !!!
And then, when i logged into portal, i get the following message:
SakaiPortalLogin.loginAndCreate id=onursirin pw=plugh-xyzzy sec=plugh-xyzzy
fn=Onur ln=Sirin [email protected] ip=10.4.3.1
Site exists...~onursirin
That's all what i see in catalina.out.
By the way, we are using Cisco CSS (Content Switch) for Load Balancing
process.
Behind CSS, there is apache server and application server installed on two
servers which mentioned in this page
http://confluence.sakaiproject.org/confluence/display/DOC/Sakai+2.4+Admin+Guide+-LoadBalancing+and+Scaling
http://confluence.sakaiproject.org/confluence/display/DOC/Sakai+2.4+Admin+Guide+-LoadBalancing+and+Scaling
as thin client .
CSS DNS address = sucourse.sabanciuniv.edu
App server DNS address = sakws1.sabanciuniv.edu and sakws2.sabanciuniv.edu
It is enough to type sucourse.sabanciuniv.edu address in web browser.
Their sakai.properties files are similar. However, there are following
parameters that i didn't use in my sakai.properties file. May be i should
use them. !!
[email protected]
[email protected]
[email protected]
Now, i have changed my connection type by connecting Campus VPN server with
Checkpoint VPN client, i got my sakai course pages correctly via sakai
portlet. However, in campus i had same problem today.
So, like i said, the situation is changing due to unknown reason.
From portlet, i clicked on any course, i get blank screen with followingaddress in web browser address bar.
https://sucourse.sabanciuniv.edu/sakai-login-tool/container?sakai.session=02274ca6-fc19-413c-80d9-4332ae4e4499&ticket=ST-5342-bLIfR5lVs29HB1ZAeRrMA3bbmQtVWRJqQ6N-20
That's all.
Thank you for your response Charles !
Regards
Charles Severance wrote:
View this message in context: http://www.nabble.com/Sakai-portlet-problem-in-uPortal-tf4304476.html#a12262587
Sent from the Sakai - Development mailing list archive at Nabble.com.
This automatic notification message was sent by Sakai Collab (https://collab.sakaiproject.org/portal) from the DG: Development (a.k.a. sakai-dev) site.
You can modify how you receive notifications at My Workspace > Preferences.
A7 OK FETCH completed
Received: from mr4.its.yale.edu (mr4.its.yale.edu [130.132.50.10])
by pantheon-po09.its.yale.edu (8.12.11.20060308/8.12.11) with ESMTP id l7LKbJRC006741
(version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NOT);
Tue, 21 Aug 2007 16:37:19 -0400
Received: from paploo.uhi.ac.uk (app1.prod.collab.uhi.ac.uk [194.35.219.184])
by mr4.its.yale.edu (8.12.11.20060308/8.12.11) with ESMTP id l7LKbH3b030903;
Tue, 21 Aug 2007 16:37:18 -0400
Received: from paploo.uhi.ac.uk (localhost [127.0.0.1])
by paploo.uhi.ac.uk (Postfix) with ESMTP id 7F70050E80;
Tue, 21 Aug 2007 20:54:16 +0100 (BST)
Message-ID: <[email protected]>
Mime-Version: 1.0
Content-Transfer-Encoding: 7bit
Received: from prod.collab.uhi.ac.uk ([194.35.219.182])
by paploo.uhi.ac.uk (JAMES SMTP Server 2.1.3) with SMTP ID 665
for <[email protected]>;
Tue, 21 Aug 2007 20:53:07 +0100 (BST)
Received: from kuber.nabble.com (kuber.nabble.com [216.139.236.158])
by shmi.uhi.ac.uk (Postfix) with ESMTP id 347909F12
for <[email protected]>; Tue, 21 Aug 2007 21:35:26 +0100 (BST)
Received: from isper.nabble.com ([192.168.236.156])
by kuber.nabble.com with esmtp (Exim 4.63)
(envelope-from <[email protected]>)
id 1INaRf-0004yq-5U
for [email protected]; Tue, 21 Aug 2007 13:35:23 -0700
Date: Tue, 21 Aug 2007 13:35:23 -0700 (PDT)
From: Onur Sirin <[email protected]>
To: [email protected]
Subject: Re: Sakai portlet problem in uPortal
In-Reply-To: <[email protected]>
X-Content-Type-Outer-Envelope: text/plain; charset=us-ascii
X-Nabble-From: [email protected]
References: <[email protected]> <[email protected]>
X-Content-Type-Message-Body: text/plain; charset=us-ascii
Content-Type: text/plain; charset=us-ascii
X-YaleITSMailFilter: Version 1.2c (attachment(s) not renamed)
X-Yale-Not-Spam: For more info see: http://www.yale.edu/email/spam/content.html
X-Yale-Spam-Score: (0)
X-Yale-Filter-Score: 0
X-Scanned-By: MIMEDefang 2.52 on 130.132.50.10
Hi Charles,
I used a portlet you created first but not in trunk. (as sakai-dash.war
file) This might be older one.
From catalina.out i get following logs.First, as always i get:
WARN: Shared Segment file is missing
/home/sakai/tomcat/sakai/sharedsegments/1187722277361.zip (2007-08-21
23:02:38,279
SearchBuilder_0_org.sakaiproject.search.index.impl.JDBCClusterIndexStore)
ERROR: There has been a major poblem with the Search Index which has become
corrupted (2007-08-21 23:02:38,285
SearchBuilder_0_org.sakaiproject.search.index.impl.ClusterFSIndexStorage)
java.io.IOException: No Index available to open
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexReader(ClusterFSIndexStorage.java:211)
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexSearcher(ClusterFSIndexStorage.java:288)
at
org.sakaiproject.search.index.impl.SearchIndexStorage.getIndexSearcher(SearchIndexStorage.java:97)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.getIndexSearcher(SearchServiceImpl.java:554)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.reload(SearchServiceImpl.java:451)
at
org.sakaiproject.search.component.service.impl.SearchIndexBuilderWorkerImpl.run(SearchIndexBuilderWorkerImpl.java:485)
at java.lang.Thread.run(Thread.java:595)
WARN: Shared Segment file is missing
/home/sakai/tomcat/sakai/sharedsegments/1187722277361.zip (2007-08-21
23:02:38,460
SearchBuilder_1_org.sakaiproject.search.index.impl.JDBCClusterIndexStore)
ERROR: There has been a major poblem with the Search Index which has become
corrupted (2007-08-21 23:02:38,466
SearchBuilder_1_org.sakaiproject.search.index.impl.ClusterFSIndexStorage)
java.io.IOException: No Index available to open
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexReader(ClusterFSIndexStorage.java:211)
at
org.sakaiproject.search.index.impl.ClusterFSIndexStorage.getIndexSearcher(ClusterFSIndexStorage.java:288)
at
org.sakaiproject.search.index.impl.SearchIndexStorage.getIndexSearcher(SearchIndexStorage.java:97)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.getIndexSearcher(SearchServiceImpl.java:554)
at
org.sakaiproject.search.component.service.impl.SearchServiceImpl.reload(SearchServiceImpl.java:451)
at
org.sakaiproject.search.component.service.impl.SearchIndexBuilderWorkerImpl.run(SearchIndexBuilderWorkerImpl.java:485)
at java.lang.Thread.run(Thread.java:595)
I don't know what it is. !!!
And then, when i logged into portal, i get the following message:
SakaiPortalLogin.loginAndCreate id=onursirin pw=plugh-xyzzy sec=plugh-xyzzy
fn=Onur ln=Sirin [email protected] ip=10.4.3.1
Site exists...~onursirin
That's all what i see in catalina.out.
By the way, we are using Cisco CSS (Content Switch) for Load Balancing
process.
Behind CSS, there is apache server and application server installed on two
servers which mentioned in this page
http://confluence.sakaiproject.org/confluence/display/DOC/Sakai+2.4+Admin+Guide+-LoadBalancing+and+Scaling
http://confluence.sakaiproject.org/confluence/display/DOC/Sakai+2.4+Admin+Guide+-LoadBalancing+and+Scaling
as thin client .
CSS DNS address = sucourse.sabanciuniv.edu
App server DNS address = sakws1.sabanciuniv.edu and sakws2.sabanciuniv.edu
It is enough to type sucourse.sabanciuniv.edu address in web browser.
Their sakai.properties files are similar. However, there are following
parameters that i didn't use in my sakai.properties file. May be i should
use them. !!
[email protected]
[email protected]
[email protected]
Now, i have changed my connection type by connecting Campus VPN serverThe command that seems to be causing problems for Exchange is this one:
A4 APPEND "Sakai-Dev List" (\Deleted \Seen NonJunk) "21-Aug-2007 16:37:20 -0400" {7024+}
As far as I can see, there's nothing wrong with the syntax of that command.
My first guess is that Exchange is unhappy with the flags. Possibly
it refuses to append a message with the \Deleted flag set. If you're
willing to modify the flags in the source mailbox, I would try turning
off the DELETED flag. Or, try not copying deleted messages.
If that doesn't work, the next thing to try is to get rid of all of the
flags. You might want to copy the message into a local copy
in order to lose all the flags from the original. -
Can't use google. Little help please
For some reason I cannot use Google as a search engine or access its website. Would really like to resolve this. Any help is really appreciated.
Things I have tried:
1.) Ping google and it was successful
The address it is using is 173.194.117.242
To make things weird, if I use this numerical address in the search cue I in fact get access to the google website
2.) I flushed the DNS in "Terminal"
Not sure if that did anything. I read somewhere to try it
Important background information
When I enter google in my search function, I am directed to this page strangely http://122.132.196.148/33407BMULZ/dsawfffs.php?64198
I do live in South Korea so that's why its in Korean. Basically it tells me I need to update google chrome (which I am not even using) or download some binary patch that really only is meant for Microsoft users so it doesn't work on my computer anyway.
So...Why is it that I can reach 173.194.117.242 (google) but then am directed to that strange web page in korean when I use google as a search engine in my browser (firefox,safari)
Thanks!Please review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071
http://www.thesafemac.com/tech-support-scam-pop-ups/ -
Pulse dialling only !! Help please
Hello, I am about at the end of my tether.....I have moved into a new build property and have a BT home hub. For some reason which is beyond my comprehension I am unable to dial out unless I set my phone to 'pulse' dialling instead of 'tone'
This means that all of the automated answering services drive me mad as I cant use them...I have to listen to the press one for this, press two for that for ages before they might just connect me to a person.
The phone works perfectly in another house so to my mind it is a problem within my property.
I have followed the troubleshooting guide which tells me what to do to check an outside connector - all up to the retest the line which I cant as the phone is completely dead.
I have lost patience with trying to explain to someone at BT - I'm not sure if I am not explaining properly or they just dont understand..... Surely a new property should be able to use tone dialling ????It it could be caused by a faulty line card in the telephone exchange.
BT should be able to arrange to have the line checked at the exchange by an Openreach frames technician.
If a fault is detected, they should be able to move your line to a different piece of equipment.
Report the fault as "unable to dial out", do not mention that it works on pulse dial, as many of the fault reception people will not understand what you mean. Pulse dialling is a legacy system and not always understood !
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Dv73060us connected to t v via HDMI Audio only from PC Help, please OS is Windows 7
I have connected my pc , using HDMI cable, to the TV, Everything seems to work well except for the fact that the audio is through the pc only. I went to control panel. hardware, sound and made the hdmi option the default.Audio still from pc only. Someone's help, please
wcrawf,
The brand of TV makes a difference sometmes... older Philips TVs in particular are fussy and have their own setup in the control panels (cannot recall where, this is from a thread from last ... Oct? I think I can find it if you need the info).
There is an "Order of Events" that needs to be followed; it is more important sometimes than others.
If the issue is a "simple one", then this may help as a "Check List":
Resolving HDMI Display and Sound Issues
Reprint of an earlier post - something here may work:
NOTE: If this does work, the "Hard Reset" rule applies - it should "stick", that is, you shouldn't have to do it this way each time - it's just a matter of getting it set up.
Order of Events - A "Hard Reset" of the HDMI Audio Setup:
Enable Digital Audio (S/PDIF)
Connect HDMI from computer toTV’s HDMI/DVI input port
Set your TV input to HDMI/DVI input. (You won’t have sound yet.)
Turn of the TV. Shut down the computer.
Boot the computer - wait for it to boot all the way. Log in.
Sound should be "dead" - no system sounds at this point.
All the audio should be going through the HDMI port.
If not, and you are getting sound, try setting "Digital Audio" setting (if you have it) as an option, [quote] "although this should not be necessary."
Remove any headphones and any other non-HDMI output from computer and Reboot.
If you get sound, it's still not ready - play with the sound output.
When you get it to the point where the sound is "dead" (while the HDMI port is still connected) after you reboot, you are ready.
Turn on the TV.
Check for Sound through the HDMI port. Should be working.
The FIX-ALL Link for HDMI:
I could take credit for this - but, you know - this is just not my area of expertise... Your solution may be here - almost everything that can happen to HDMI has happened to someone at some point. I've used this forum before - it's a great reference.
http://en.kioskea.net/forum/affich-79711-laptop-sound-on-tv-with-hdmi-cable
I hope this helps.
Kudos are Earned!
====================================================================================
Kind Regards,
Dragon-Fur -
Increasing Crashes "Read Only Memory Exception" HELP please!
Over the past month and a half I'm starting to get regular and increasing crashes, mostly in my Adobe CS3 programs with this error:
Read-only memory exception. A memory reference was made to an address that cannot be written to.
unresolvablePageFaultException
I am starting to get towards my wit's end and want to rule out hard drive or logic board problems. Today after I got this crash in Dreamweaver and Fireworks (for the first time in FW), all my programs stopped opening and responding. I am noticing in Activity monitor 2 continuous stalls:
175 UserEventAgent (Not Responding) 0.0 3 4.10 MB 722.06 MB
168 colormunkid (Not Responding) 0.0 1 8.20 MB 766.86 MB
Even after reboots.
Console said:
5/19/08 9:13:55 AM [0x0-0x182182].com.adobe.dreamweaver-9.0 2008-05-19 09:13:55.462 Adobe Crash Reporter[9245:10b] (null)
5/19/08 9:14:03 AM com.apple.launchd[152] ([0x0-0x183183].com.macromedia.fireworks[9240]) Exited abnormally: Segmentation fault
5/19/08 9:16:20 AM Acrobat[9259] NSDocumentController Info.plist warning: The values of CFBundleTypeRole entries must be 'Editor', 'Viewer', 'None', or 'Shell'.
Crash reporters say:
Version: Adobe Fireworks CS3 version "9.0.1.1213" (9.0.1)
Code Type: PPC (Native)
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000001, 0x00000000935dde9c
Crashed Thread: 0
Application Specific Information:
* Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '* -[NSCFType count]: unrecognized selector sent to instance 0x1283b740'
Exception: EXCBADACCESS (0x0001)
Codes: KERNINVALIDADDRESS (0x0001) at 0x24836e70
Thread 0 Crashed:
: Dreamweaver
Path: /Applications/Adobe Dreamweaver CS3/Dreamweaver.app/Contents/MacOS/Dreamweaver
Parent: WindowServer [84]
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNINVALIDADDRESS (0x0001) at 0x283040ffI am having a very similar problem with Dreamweaver 8 running
on OS X10.4.11.
If I choose passive FTP, Dreamweaver appears to upload a
file, when in fact the error logs reports that the file could not
be upload because it was not found, or because of permission
problems.
If I do not upload with passive FTP , Dreamweaver 8 crashes
& Dreamweaver 8 loses the site's root folder, informing me that
it cannot be found and I must use the manage sites feature to
recreate the cache for the site that was there.
If I use FETCH, no problem... all files are uploaded
successfully.
I recently had a hard drive failure on my Mac, had a new HD
installed by the folks at the Genius Bar, and thought perhaps my
new HD was buggy... however, now it seems there must a a
permissions problem built into the Dreamweaver FTP protocols.
I have not seen a patch for this, although when I reinstalled
the software, I did download all updates.
I know my reply offers no solutions, but I do thank you for
your post. -
Loadjava and jpub in web service using UTL_DBWS giving errors - Help Please
Hi all,
Solicit your help in the below-mentioned scenario.
I am trying to access some published web services from 9.2.0.1.0 RDBMS using UTL_DBMS API. I have accomplished the same using UTL_HTTP. I have followed the instructions specified in:
'http://www.oracle.com/technology/sample_code/tech/java/jsp/callout_users_guide.htm#Web_Service_Callout_Utility_Download_'
to prepare the database, download Callout Utility for pre-10g RDBMS (ZIP, 5.68MB), JPub 9.2.0.1.0 Production and OC4J Release 10.1.2 (standalone) and set the environment variables.
loadjava ran successfully for:
%ORACLE_DB_HOME%/BIN/loadjava -user scott/tiger@ORACLE -r -v -f -grant public -genmissing %ORACLE_HOME%/OC4J/j2ee/home/lib/servlet.jar
%ORACLE_DB_HOME%/BIN/loadjava -user scott/tiger@ORACLE -r -v -f -grant public -genmissing %ORACLE_HOME%/OC4J/j2ee/home/lib/ejb.jar
%ORACLE_DB_HOME%/BIN/loadjava -user scott/tiger@ORACLE -r -v -f -grant public -genmissing %ORACLE_HOME%/jlib/jssl-1_2.jar
%ORACLE_DB_HOME%/BIN/loadjava -user scott/tiger@ORACLE -r -v -f -grant public -genmissing %ORACLE_HOME%/soap/webapps\soap\WEB-INF\lib\soap.jar
But it gave error for:
%ORACLE_DB_HOME%/BIN/loadjava -user scott/tiger@ORACLE -r -v -f -grant public -genmissing %ORACLE_HOME%/OC4J/j2ee/home/lib/mail.jar
%ORACLE_DB_HOME%/BIN/loadjava -user scott/tiger@ORACLE -r -v -f -grant public -genmissing %ORACLE_HOME%/OC4J/lib/dms.jar
ORA-29534: referenced object SCOTT.oracle/core/odjl/logMessage could not be resolved.
ORA-29545: badly formed class.
And while trying to run JPub using:
jpub -user=scott/tiger -sysuser sys/change_on_install -httpproxy=www-proxy.us.oracle.com:80 -proxywsdl=http://www.webservicex.net/stockquote.asmx?wsdl -endpoint=http://www.webservicex.net/stockquote.asmx -proxyopts=soap,tabfun -dir=Stock -plsqlpackage=soap_callout_wrapper
I get error:
J2T-120, ERROR: Illegal option "-proxywsdl=http://www.webservicex.net/stockquote.asmx?wsdl" ignored
J2T-120, ERROR: Illegal option "-endpoint=http://www.webservicex.net/stockquote.asmx" ignored
J2T-120, ERROR: Illegal option "-proxyopts=soap,tabfun" ignored
Any help in resolving these issues will be appreciated. Kindly also advise which api – UTL_HTTP or UTL_DBWS I should go for and why.
Regards,
LeslieIt may be better to post this problem to this forum - http://forums.oracle.com/forums/category.jspa?categoryID=24 since this is much more related to loadjava and jpub
-
What is using the memory? help please.
i just noticed that in the bottom of my finder it says i only have 7.42 gb available. i do have a lot of photos and music on my computer, but i have taken off things like garage band, which i never use.
i feel like 7.42 is very little, and i am wondering if there is a way to see what is using the memory (and how much each application is using). i just have an ibook g4 and i didn't get anything added to it when i bought it, i am just worried i have a bug eating my memory.
any suggestions?Hi annamaria,
WhatSize will show you the size of every file/folder on your computer. Photos can take up a lot of space especially if you have the individual files and have imported them into iPhoto. In that case you have two of each.
It's doubtful there's any bug taking the hard drive space. Over time we just accumulate more and more and slowly run out of space.
John -
Using LOOKUPVALUE--need urgent help please
Hello,
what im trying to do is grab the first date when someone bought a product. I have 2 tables. 1 where my products are registered with product ID and the other table shows when the item was bought. What im trying to do is show in the first table only the date
where item was first bought. Im using lookupvalue and gives me an error because I have repeated itemsID in the dates list.
How could I only grab the first date??
Thank youPower Pivot Pro and
"The Italians" have been the richest sources for me.
What that measure does is find the smallest value in your fact table - MIN( ... ), but this function is evaluated in a special context.
CALCULATE() allows us to change the context that we evaluate a function in. What we're doing is changing the context so that we evaluate MIN() only on the rows in the table specified by FILTER().
FILTER() takes a table, and then iterates row-by-row over that table, performing the logical test that we specify. It returns only those rows that have a true value for that test. The test is checking that the [itemsID] on the current row (current row in
our iteration using FILTER()) is equal to the [itemsID] from the row of the product dimension that this whole expression (CALCULATE( MIN(...), FILTER(...))) is being evaluated for. EARLIER() says, "I know my current row refers to the current row in my
iteration through FILTER(), but there is also a current row in the table where this calculated column is defined - give me the latter meaning of current row."
Maybe you are looking for
-
Adobe CC Premiere Pro Exporting Excruciatingly Slow... Please Help?
Hi guys, school project due in a few hours, and I've been fighting with premiere pro for close to 15 hours on a 15 minute video. It's pretty basic, a little bit of footage and a few pictures in 1920x1080, but for the life of me this thing will not ex
-
I right clicked my iPod on iTunes and clicked restore from back up because i thought it would undo my IOS6 update. IT DELETED ALL MY PICTURES (2,000) AND I DON'T KNOW HOW TO GET THEM BACK!!!! Please help me!!!!!
-
HT4623 My camara won't open on my phone, what do I do?
My camara on my I4s will not open what do i do?
-
Colour safe for broadcast help...
Hi all.... Right, not too sure about this one.... Having taught myself coulor corrections, luminance and Gammas etc.... I am now being carefull at my colour levels throughout my sequences, I am left with an issue. My sequence is done and I am about t
-
Adobe form - Split internal table data & dis on the right and left corner
HI , I have a form where i am populating the data via an Internal Table. The concern i have is i have 100 rows in the table and i want to print the first 10 rows on the right hand side of the page and the next 10 rows on the Left hand side of the pag