[Resolved][SCE 2010] Daily Health Report

Hello everybody!
I'm working in the IT support. And it turns that we cannot found the origin of one problem.
I explain myself:
We have many servers. For the exchange for System Center Essentials2010 and others.
But since the beginning of October the Daily Health Report is not send automatically.
I have tried to follow all the steps to configure the DHR (Daily Health Report) but it seems not working yet! When I press the bottom to send the DHR it works (manually)! But it is not working automatically.
Does somebody have any idea?

So, could you please check this link, it provide the solution to check the daily health of exchange 2013 :
http://exchangeserverpro.com/troubleshooting-exchange-server-2013-with-test-cmdlets/

Similar Messages

Exchange 2013 Daily Health Check Script

Hi All,
I recently migrated from Exchange 2010 to Exchange 2013. Prior to the migration the daily health check was being used daily to send my team and I the HTML report.
I have downloaded the new v1.07 script and followed the same rules and settings I used for Exchange 2010 when setting up the script.
The script only runs now via Exchange shell and does not send the HTML report and I am unable to run the script via a batch file that called the ./ps1 file in a windows command prompt and am also unable to as a result, use the task scheduler to schedule
this task.
I am desperately in need of getting this morning report as its been so useful, I cant do without it now.
Any advise would be greatly appreciated.
Thanks so much
Alton

So, could you please check this link, it provide the solution to check the daily health of exchange 2013 :
http://exchangeserverpro.com/troubleshooting-exchange-server-2013-with-test-cmdlets/

Crawl Health Reports in Sharepoint Foundation 2013 Farm

I am getting the following error within a newly build SharePoint Foundation 2013 Farm. I would like to know how I go about resolving this issue:
When browsing to Central Admin --> Search Administration --> Crawl Health Reports, I receive the following error:
Sorry, something went wrong
Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "Resources.MossChart.resources" was correctly embedded or linked into assembly "App_GlobalResources.kbifvsaw" at compile time, or
that all the satellite assemblies required are loadable and fully signed.
Technical Details
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 0b83a29c-2582-9044-9d87-fc1089e8f7ee
Date and Time: 7/8/2014 1:47:38 PM
When I browse to Central Admin --> Search Administration --> Crawl Health Reports, I receive the following error:
Sorry, something went wrong
Could not find any resources appropriate for the specified culture or the neutral culture. Make sure "Resources.MossChart.resources" was correctly embedded or linked into assembly "App_GlobalResources.kbifvsaw" at compile time, or
that all the satellite assemblies required are loadable and fully signed.
Technical Details
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 1b83a29c-0562-9044-9d87-f319e14ba795
Date and Time: 7/8/2014 1:48:43 PM
I suspect that both errors have the same root cause, but I could do with some assistance in resolving this. Do I need to install some Microsoft Chart Controls by any chance? I am assuming that as the links are there in SharePoint Foundation, that they should
be working within this edition of SharePoint.
Kevin Evans

Hi Kevin,
According to your error message, please make sure "Resources.MossChart.resources" was correctly embedded or linked into assembly "App_GlobalResources.kbifvsaw”, it seems like that mosschart.resx
and mosschart.en-US.resx missing or bad of the error web site.
To correct the problem you can manually deploy the resource files to the correct IIS Virtual Directory location. To deploy the resource files manually following the steps below.
1. Navigate to 'C:\Program Files\Common Files\Microsoft Shared\web server extensions\15\CONFIG\Resources'
2. Copy the files 'mosschart.resx' and 'mosschart.en-US.resx'.
3. Navigate to the IIS Virtual Directory of your SharePoint website
4. Paste 'mosschart.resx' 'mosschart.en-US.resx’ into the Virtual Directory's App_GlobalResources folder
5. Perform an IISRESET
6. Refresh your page.
Reference:
http://social.technet.microsoft.com/Forums/en-US/4a89e23c-a1c1-4b8a-99e9-4e1a36b8ecf8/web-analytics-errors?forum=sharepointadminprevious
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Problem installing SCE 2010 on a virtual machine

I'm having issues while installing SCE on a clean Hyper-V virtual machine running Windows 2008 R2.
I've tried several options:
- all-in-one from scratch, no SQL or serverroles/features installed -> error 1603
- seperate SQL and SCE Management Server -> Management server installation fails, error 1603
Different variations including and excluding reporting and VM Management with the same results.
I then went and tried to install tbe Management server on a physical box -> success!
However, I can't use this box for SCE and need to virtualize the whole thing.
I'll dig through the SCE setup log files to see where it goes wrong.
In the mean time, any ideas/suggestions anyone?
/edit
Below a snippet of the setup log. This is the part just before I get 'Return value 3':
MSI (s) (68:88) [15:42:11:574]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIDD55.tmp, Entrypoint: AddPrivilegesToActionsAccount
AddPrivilegesToActionsAccount: Custom action data property value. *****\administrator
AddPrivilegeToAccount: Giving privilege to account. *****\administrator
AddPrivilegeToAccount: Account does not have privilege. SeServiceLogonRight
MSI (s) (68:14) [15:42:11:637]: Executing op: ActionStart(Name=_SetHealthServiceACL.80B659D9_F758_4E7D_B4FA_E53FC737DCC9,,)
AddPrivilegeToAccount: Successfully granted privilege right to account. SeServiceLogonRight
MSI (s) (68:14) [15:42:11:639]: Executing op: CustomActionSchedule(Action=_SetHealthServiceACL.80B659D9_F758_4E7D_B4FA_E53FC737DCC9,ActionType=3073,Source=BinaryData,Target=SetHealthServiceACL,)
MSI (s) (68:F8) [15:42:11:642]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIDD95.tmp, Entrypoint: SetHealthServiceACL
MSI (s) (68:14) [15:42:11:734]: Executing op: ActionStart(Name=_ChangeMOMHealthServiceRecoverySettings.80B659D9_F758_4E7D_B4FA_E53FC737DCC9,,)
MSI (s) (68:14) [15:42:11:736]: Executing op: CustomActionSchedule(Action=_ChangeMOMHealthServiceRecoverySettings.80B659D9_F758_4E7D_B4FA_E53FC737DCC9,ActionType=3073,Source=BinaryData,Target=ChangeMOMHealthServiceRecoverySettings,)
MSI (s) (68:04) [15:42:11:739]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIDDF3.tmp, Entrypoint: ChangeMOMHealthServiceRecoverySettings
MSI (s) (68:14) [15:42:11:755]: Executing op: ActionStart(Name=_RegisterMU.80B659D9_F758_4E7D_B4FA_E53FC737DCC9,,)
MSI (s) (68:14) [15:42:11:756]: Executing op: CustomActionSchedule(Action=_RegisterMU.80B659D9_F758_4E7D_B4FA_E53FC737DCC9,ActionType=1025,Source=BinaryData,Target=RegisterMU,CustomActionData=C:\Program Files\System Center Essentials\MUAuth.cab 3)
MSI (s) (68:A0) [15:42:11:757]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIDE04.tmp, Entrypoint: RegisterMU
RegisterMU: Custom action data property value. C:\Program Files\System Center Essentials\MUAuth.cab 3
RegisterMU: AddService failed. Error Code: 0x80070005.
CustomAction _RegisterMU.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (68:14) [15:42:12:017]: User policy value 'DisableRollback' is 0
MSI (s) (68:14) [15:42:12:017]: Machine policy value 'DisableRollback' is 0
Action ended 15:42:12: InstallFinalize. Return value 3.

Hi Guys,
I am having the exact same issue. I have verified all prerequisites and can find absolutely nothing I am doing wrong with regards to what is prescribed in the guides. I am also trying to install SCE 2010 on a Hyper-V guest on Windows Server 2008 64Bit. I
tried several times and troubleshooted my way through all the blogs. This is what I have done:
Re-imaged the server (twice),
Verified NetBios and FQDN is similar,
Opened all required ports first and also disabled firewall eventualy,
Using Domain Admin account,
Removed ISS and reinstalled(SCE still complaing IIS needs configuration),
Removed ISS again and let SCE setup fix prerequistes (SCE still complaining IIS needs configuration),
Also below please find my exact log... The sucess of my SCE 2010 installation is VERY KEY for us, but I believe for the product team as well. We are busy building an Enteorise Management Architecture in a hosted/multi-tennant environment and at this moment
our POC is a showstopper :(.
operty(S): RuntimeUseWorkstationGC = 1
Property(S): ShouldManageMemory = true
Property(S): MOM_DB_IS_LOCAL = 1
Property(S): AGENTSERVERCOMPATIBLE = 1
Property(S): IsValidMgmtGroup = 1
Property(S): WINDOWS_LANGUAGE_ID = ENS
Property(S): DNS_COMPUTERNAME = PSGKSTSCE.psgkst.co.za
Property(S): AD_COMPUTERNAME = PSGKSTSCE.psgkst.co.za
Property(S): NETBIOS_DOMAINNAME = PSGKST
Property(S): ENABLE_ERROR_REPORTING = 0
Property(S): USE_SETTINGS_FROM_AD = 0
Property(S): SDK_ACCOUNT_FOR_DB = SYSTEM
Property(S): SDK_DOMAIN_FOR_DB = NT AUTHORITY
Property(S): ACTIONSDOMAIN_FOR_DB = PSGKST
Property(S): ACTIONSUSER_FOR_DB = Service-SCE
Property(S): ROOT_MANAGEMENT_SERVER_DNS = PSGKSTSCE.psgkst.co.za
Property(S): ROOT_MANAGEMENT_SERVER_AD = PSGKSTSCE.psgkst.co.za
Property(S): CONFIG_ACCOUNT_FOR_DB = SYSTEM
Property(S): CONFIG_DOMAIN_FOR_DB = NT AUTHORITY
Property(S): SOURCEDIR = D:\Setup\AMD64\Server\
Property(S): SourcedirProduct = {EA43D2A4-0926-445A-A220-6FF0CA34AA09}
Property(S): MANAGEMENT_GROUP_ID = ac80d722-cdb5-acaa-a3e3-c5b2e1ca4717
Property(S): ROOT_MANAGEMENT_SERVER_PORT_ID = C51B7833-DA54-1653-D8FD-1A738EF8DED5
Property(S): ProductToBeRegistered = 1
MSI (s) (24:C8) [10:55:13:979]: Note: 1: 1708
MSI (s) (24:C8) [10:55:13:980]: Product: System Center Essentials 2010 -- Installation operation failed.
MSI (s) (24:C8) [10:55:13:981]: Windows Installer installed the product. Product Name: System Center Essentials 2010. Product Version: 7.0.2432.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
MSI (s) (24:C8) [10:55:13:987]: Deferring clean up of packages/files, if any exist
MSI (s) (24:C8) [10:55:13:987]: MainEngineThread is returning 1603
MSI (s) (24:2C) [10:55:13:988]: No System Restore sequence number for this installation.
=== Logging stopped: 2010/05/12 10:55:13 ===
MSI (s) (24:2C) [10:55:13:989]: User policy value 'DisableRollback' is 0
MSI (s) (24:2C) [10:55:13:989]: Machine policy value 'DisableRollback' is 0
MSI (s) (24:2C) [10:55:13:989]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (24:2C) [10:55:13:989]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (24:2C) [10:55:13:989]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (24:2C) [10:55:13:990]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (24:2C) [10:55:13:990]: Restoring environment variables
MSI (s) (24:2C) [10:55:13:991]: Destroying RemoteAPI object.
MSI (s) (24:10) [10:55:13:991]: Custom Action Manager thread ending.
MSI (c) (98:48) [10:55:13:993]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (98:48) [10:55:13:994]: MainEngineThread is returning 1603
=== Verbose logging stopped: 2010/05/12 10:55:13 ===

Boot up of Windows Server 2012 Essentials seems slow (extended Please Wait screen) and there are errors in Health Report

Dear Sir or Madam,
I have been experimenting with the evaluation version of WS2012e trying to get the installation and subsequent build into an optimal set up, and once I have everything I want it to do mapped out, I'll set it up with the full version with using the key that
I bought.
However, I've noticed that the server seems to experience a delay during cold boot - it sits with a Please Wait screen for about 60-90 seconds before it presents the screen with an option to Log on. I have also discovered from running Health
Report, that there are some entries in the event logs which appear to coincide with start up times, and which seem to be interconnected to each other in the issues they are describing, and I have copied an example of one of those health reports below.
I assume that everything sorts itself out in due course, because the events say the process will be re-attempted and these errors don't repeat again after the system has booted up. I also have the server set to suspend when not in use with the Lights
Out add in, so it shouldn't need to cold boot often - but I wondered if there's a way to correct these errors so that they don't hold up the boot up process? I'm also concerned that these errors will cause me later problems with storage pools and
the like at a later date - the disk replication one seems particularly worrying. Alternatively, are these errors just a normal part of the start up process - the timing of when different processes start relative to each other - and can be safely ignored?
In trying to understand what the events describe, I thought that WE2012e acted as its own Domain Controller, and yet it seems from the event log entries that it is waiting for another server to respond to AD / DC requests (but there isn't another server
on my home network). The other thing I remember from when I first tried out WS2012e, is that it took control of DHCP or DNS from the router, and I found that frustrating when waking up my laptop and it wouldn't connect to the internet until the server
had fully booted up and re-asserted its network settings. Is this another symptom of the same problem? I remember seeing a posting at the SBS Diva's site about how to update the server so that it gave connected PCs a backup option for connecting
to the internet when the server wasn't available, and was going to try to find that again to see if that helped.
By way of background - there isn't another server in my home network. This is an attempt to do a clean install onto the same hardware that I ran the initial trial of WS2012e, now that the trial has expired, so I'm not trying to migrate from an existing
server. I moved all the data on the trial server off onto an external disk, with the intention of importing it back once I had the Storage Pools set up the way I wanted on the new build, and since I didn't want to keep anything else about the server
trial. Am I correct in thinking that I don't need to go down the Migration route during installation, and can go through a Clean install in this circumstance?
I'm running on an Asus P8-H77-i motherboard, with an i5-3470s CPU and 16MB RAM, and I have WS2012e installed on 256Mb SSD formatted under GPT with uEFI boot - the latter being the main reason for the reinstall, instead of just giving the Evaluation
version the new key on the original MBR set up. I've also enabled Intel Rapid Storage and Rapid Start - and successfully set aside the hibernate partition on the SSD - but discovered that this is about forcing a hibernate after suspend, allowing
the system to power down until its needed again, and then resuming from hibernate on the SSD rather than cold boot each time. That seems to work, but doesn't improve the cold boot times at all, which was what I was hoping for - ideally the way my
laptop will boot from cold in a few seconds into Windows 8.
Yours faithfully,
Avon
======
Health Report extract.
Critical Errors in Event Logs in Last 24 Hours
DFSR
Event ID: 3221226674
The DFS Replication service failed to contact domain controller to access
configuration information. Replication is stopped. The service will try again
during the next configuration polling cycle, which will occur in 60 minutes.
This event can be caused by TCP/IP connectivity, firewall, Active Directory
Domain Services, or DNS issues.
Additional Information:
Error: 160 (One or more arguments are not correct.)
Last occurrence: 26 May 2014 18:51:28
Total occurrence(s): 2
DNS
Event ID: 2147487661
The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start until the initial synchronization is complete because critical DNS
data might not yet be replicated onto this domain controller. If events in the AD DS event log indicate that there is a problem with DNS name resolution, consider adding the IP address of another DNS server for this domain to the DNS server list in the Internet
Protocol properties of this computer. This event will be logged every two minutes until AD DS has signaled that the initial synchronization has successfully completed.
Last occurrence: 26 May 2014 18:51:15
Total occurrence(s): 2
ADWS
Event ID: 3221226674
This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Last occurrence: 26 May 2014 18:51:08
Total occurrence(s): 2
NTDS General
Event ID: 2147486534
The security of this directory server can be significantly enhanced by configuring the server to reject SASL (Negotiate,
Kerberos, NTLM, or Digest) LDAP binds that do not request signing (integrity verification) and LDAP simple binds that
are performed on a cleartext (non-SSL/TLS-encrypted) connection. Even if no clients are using such binds,
configuring the server to reject them will improve the security of this server.
Some clients may currently be relying on unsigned SASL binds or LDAP simple binds over a non-SSL/TLS connection,
and will stop working if this configuration change is made. To assist in identifying these clients, if such binds occur this
directory server will log a summary event once every 24 hours indicating how many such binds
occurred. You are encouraged to configure those clients to not use such binds. Once no such events are observed
for an extended period, it is recommended that you configure the server to reject such binds.
For more details and information on how to make this configuration change to the server, please see http://go.microsoft.com/fwlink/?LinkID=87923.
You can enable additional logging to log an event each time a client makes such a bind, including
information on which client made the bind. To do so, please raise the setting for the "LDAP Interface Events" event logging category
to level 2 or higher.
Last occurrence: 26 May 2014 18:51:00
Total occurrence(s): 2
=======

Hi KerguelanAvon,
Based on your description, it seems to be hard to narrow down the cause of this issue. Please refer to following operations and monitor the result. It may help us to go further, and then solve this issue.
1. Please refer to the following article and troubleshoot slow boot.
New Slow Logon, Slow Boot Troubleshooting Content
2. On your server 2012 essentials, please start a BPA scan and fix all that it can find, then monitor the result.
Regarding to those critical Errors in Health Report, please perform
Dcdiag on the server. Meanwhile, please refer to the following article and troubleshoot network connectivity, firewall setting and AD DS issue.
DFSR Event 1202 (DFS Replication)
Hope this helps.
Best regards,
Justin Gu
Hi Justin,
I'm reading through the links you referred me to but it's taking a while. In the meantime I tried running BPA as you suggested. I'm sure when I ran it before, it didn't say much beyond 81 checks completed, and I couldn't find a way to get any
more detail.
Now it says
Problem:
The DNS client is not configured to point only to the internal IP address of the server.
Impact:
If the DNS client is not configured to point only to the internal IP address of the server, DNS name resolution can fail.
Resolution:
To resolve this problem:
1. From the client computer, open the Properties page for the network connection.
2. Make sure that DNS is configured to point only to the internal IP address of the server.
Except that it is.
Connection-specific DNS Suffix:
Description: Broadcom 802.11n Network Adapter
Physical Address: ‎00-1B-B1-28-AE-63
DHCP Enabled: Yes
IPv4 Address: 192.168.1.133
IPv4 Subnet Mask: 255.255.255.0
Lease Obtained: 03 June 2014 21:56:49
Lease Expires: 05 June 2014 20:24:20
IPv4 Default Gateway: 192.168.1.1
IPv4 DHCP Server: 192.168.1.1
IPv4 DNS Server: 192.168.1.49
IPv4 WINS Server:
NetBIOS over Tcpip Enabled: Yes
Link-local IPv6 Address: fe80::80ef:48d5:9fde:f10e%14
IPv6 Default Gateway:
IPv6 DNS Server:
I'll try rebooting from the current windows 7 build over to windows 8 on my dual boot laptop, to see if that makes any difference, since it is the only other client PC connected to the server at the moment.
Thanks, Avon.

Std profit center report to campare daily sales report from BW

Hi
daily sales report (filtred throgh BW using Profit cneters and account groups) need to compare
with sap R/3 DATA . kindly update me where i will extract it ( like any s_alr_87..... reports in profit center ?)
let me clarify my query:
daily sales report is getting on the basis of profit centers through BW (revenue element and profit center wise)
where could we compare it with R/3
thanks in advance
Edited by: barnabasjh on Jul 1, 2010 7:23 PM

You can use following:
1. KE5Z (profit center actual line item report)
2. S_ALR_87009712 (profit center actual/plan report)
3. KE5Y (profit center plan line item report)
Thanks.
Rahul

Daily Performance Reports...

Hi,
We need to get some daily Perf reports on the basic health of the Database...
Is there any way to get daily performance statistics of Database through OEM or so...
Thanks
Joseph

asifkabirdba,
He or she does not have to mark those threads as answered. Marking a thread as answered and assigning points to the people is ethical towards the community. May be he or she could not find the answers that he or she has been looking for?
Please read;
http://wiki.oracle.com/page/Oracle+Discussion+Forums+FAQ#questions
What are "rewards points"?
It is possible for you to reward an answerer 5 points for a "helpful" answer or 10 points for a "correct" one (or none at all). Users who accumulate certain amounts of points reach different levels of recognition (see legend). In this manner, users who offer consistently helpful or correct answers raise their standing in the community. (Note: in order to award points, you must identify your post as a "question" first - which is set as default.)
What is proper discussion forum etiquette?
When asking a question, provide all the details that someone would need to answer it including your database version, e.g. Oracle 10.2.0.4. Format your code using [code] tags (see "How do I format code in my post?" below). Consulting documentation first is highly recommended. Furthermore, always be courteous; there are different levels of experience represented. A poorly worded question is better ignored than flamed - or better yet, help the poster ask a better question.
Finally, it is good form to reward answerers with points (see "What are 'reward points'?" below).Regards.
Ogan

Creating an alert on CA Health Report - Bug

We are trying to configure email alerts on the Central Admin Health Report list in SharePoint 2013. We get the confirmation email when the alert is first created, but nothing when a new error or warning arrives in the list.
Sure enough, no 'job-immediate-alert' existed on the CA webapp, as determined by viewing the CA UI Job definition page and the following powershell: Get-SPTimerJob
| ? {$_.name -like "*alert*"}
To create the job on the CA webapp I followed the advice here.
Now I can see in the Job Definition page the ‘Immediate Alerts’ job. However, when I click to see
details about the job the Last run time is N/A.
I see the Immediate Alerts job scheduled in the Scheduled Jobs page, but the Job History page is empty. I have tried to start the job manually with Powershell with the following:
Add-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue
$th = Get-SPTimerJob -WebApplication http://spsite:2013 | ? {$_.name -like "*alert*"}
Start-SPTimerJob $th
No errors, but still the Last run time is N/A
Some users have said running the updatealerttemplates may help, so ran stsadm
-o updatealerttemplates -url http://spsite:2013 but the job still will not run. I restarted the Timer Service via Windows Services as well, but still no luck.
No errors in Event Viewer or ULS. The job just seems to refuse to run on the CA Webapp. Anyone have any suggestions? (Would rather not have to create a workflow just
for this – this should be simple, right?)
UPDATE: The servers restarted today, and the job-immediate-alerts timer job ran successfully TWICE on the SharePoint Central Administration v4 WebApp. After running twice,
something seems to prevent it from processing the job. Very strange.
Any thoughts? I would like to see if this is a bug that other users have experienced. Unfortunately there is no public listing of Sharepoint bugs, and to report a bug I need to pay for it by opening a support ticket... sweet...

As you said after reboot its works...
I would enable the verbose logging and check the ULS logs why its work and why it fail / not starting? Did anything change which trigger alerts or no change after 2 alerts?
By posting a question you already report this, as MSFT monitor this forum and someone from MSFT will respond on this.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Daily Health Check MESSAGE

I'm a simple user. Here is what I get. --- Daily Health Check "Could not read the language folder for the Installation Monitor" 1) Is this serious? 2) How do I fix it? Thanks.

>
> please
thanksAs you said,
query you wrote above would give details about users sessions wait time and state,
and that info by itself would inform you about just one small piece of the overall database health state,
so by that query alone you can't be 100% sure that your db is not sick.
I guess you should also at least check: backup status,datafiles space availability,alert.log and istener.log for errors ,db objects status, oracle memory structures utilization...
and so on... + any similar checks or those ones specific to your company needs..
AWR report is mostly self-explanatory and ways how to analyze it was already many times eplained on www,you should search for those instructions
and come here with more concrete question regarding the AWR report.

Powershell - Daily Health Check

Hi all,
I have a number of different w8k and w12k servers in different sites and I wanted create a daily health check to check services are up. For instance I can write a ps script to check run at 6am daily and check various services on a windows server and then
generate a html report and mail it to a distribution list. However on some of my servers I only have one service that needs to be checked I wanted a was to check the services and collate all the reports into one place and output just one html report?
So for example could I output the results to a text file, run an ftp job to send the result to a central location and then run a ps to scrap all the results and output to html, or could the text files be scrapped from an email, this method makes better sense
for me as some of these servers will have ACLs between then and getting send via smtp will be easier then ftp.
Would like to know if anyone has any ideas or experience with doing something like this?

Are the servers on the same domain? If so use "Enter-PSSession" or if your just checking if a service is running use the "-Computer" switch to execute it on the remote server.
You could also use WMI "Get-WMIObject"
Using the above methods will let you run it from a central location.
My suggestion for performing your health checks is to define in a csv file: Server Name, IP, Heath Check Level
So have an initial Ping for the host name, if that fails then use the IP as DNS might have an issue (record results into file)
Heath Ckeck level determines if your just checking full server health or just checking for a specif service is running (ie Full, Service, ect... you define it for your requirements)
I would use WMI as there could be different versions of powershell installed and take the compatibility issues away when writing the script.
Below is a good starting script for you to use where it queries via WMI and generates a html report that is emailed out.
https://gallery.technet.microsoft.com/scriptcenter/Powershell-Script-to-Get-78687c5e
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Version 22 operating on Windows XP continuously crashes; CPU surges and can not see the Firefox Health Report (all boxes checked and share data on)???

Not sure how much clearer I can be.
Windows XP version 5.1 with Service Pack 3
Firefox Version 22
Can not view Firefox Health Report even thou all selections are made for this to happen
I share data with Mozilla

If Firefox is crashing we need the Crash IDs that are obtainable from ''about:crashes''. The crash IDs start with ''bp-''
Standard reply:
We're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash ID's to help us learn more about your crash.
#Enter about:crashes in the address bar (that's where you enter your website URL) and press Enter. You should now see a list of submitted crash reports.
#Copy the 5 most recent crash ID's that you see in the crash report window and paste them into your response here.
Thank you for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes]] article.

Daily production report

Hi, Is there any standard daily prod report available in sap? pls wht is the t-code?

Dear Yadav,
There are few reports available in standard SAP,but you have to check which one suits your business
requirement.
Check COOIS,CO28,MCPM,MCRE,MB51 for material document
For further reports goto T Code SAP1->production planning->Production control or Information
systems.
Regards
Mangalraj.S

MIS report : Daily Cumulative Report for contract in SD module

Hi All,
           Do you have any idea about MIS report in SD module.actually my requirement is that
i have to generate daily cumulative report for contract. that means at time i am selecting ten plants
and correspondingly sum of total quantity,average rate and average weight of all the contracts for particular plant should be displayed in a column and various existing flavours should be displayed in a row.
for above requirement following output format is there:
plant ->           plant1               plant2              plant3 ....   .....
flavour             quantity rate     quantity rate
cumulative
total cumulative
please refer sample code,if any.
Thks & Regards
Shailesh

Hi,
You can ask your functional people what are the required fields to develop a report below are the table.
customer related tables:
KNA1 Customer master General Data
KNB1 Customer Master Co. Code Data
KNKK Customer Master Credit Control Area Data
KNVV Sales Area Data
KNVI Customer Master Tax Indicator
KNVP Partner Function
KNVD Output type
KNVS Customer Master Ship Data
KLPA Customer/Vendor Link
Sales Documents
VBAK Sales Document - Header Data
VBAP Sales Document - Item Data
VBUK Header Status and Administrative Data
VBKD Sales Document - Business Data
VBUP Item Status
VBPA Partners
VBFA Document Flow
VBEP Sales Document Schedule Line
VBBE Sales Requirements: Individual Records
Delivery Document
LIKP Delivery header table
LIPS Delivery item table
Billing document:
VBRK Billing document header table
VBRP Billing Document Item table
Shipping
VEKP Shipping Header Table
VEPO Shipping Item Table
Thanks
VIkranth

Delay time data at Daily Production Report

Hi all
We hereby crated the Daily Production report which has the delay deatils of all depts. The delay details we are using with notifications. The problem is users required the shift wise delay according to the production.
SAP std we couldnt keep the shift at notifications level (exit also helps but time couldnt assign). The Shift A is 7 am-3 pm, B- 3 pm to 11 pm. C- 11pm-7 am. The malfunaction start time some time may exceed from the A to B shift. But delay calculation hours is only one. With out going for hard coded how could assign the delay hours shift wise.
At notification level is Capacity requirements will appear as per shift ?
please suggest

Hi,
1.Select a capacity category for which the actual capacity requirements are to be calculated on the Capacities tab page in the resource.
2.Choose ActCapReqmnts.
3.The Settings for Determining the Actual Capacity Requirements dialog box appears.
4.Set the Calc. actual cap. reqmts indicator.
5.If the actual capacity requirements are to be calculated from activities:
Enter one activity for each actual capacity requirement in Actual capacity requirements from activities. Determine the standard value parameter that identifies the corresponding activity.
regards,
Venkatesan Anandan

To prepare daily production report in grade wise

Hi,
Need your help regarding grade wise Finish Goods. My finish goods product code is in database 1601001. When bulk receipt from production how to separate grade wise quantity.
Example:
My production order quantity is 100000 pcs and receipt from production in stock is 95000 pcs. Now in 95000 pcs, 75000 are grade u201CAu201D quality and rest of 20000 pcs are u201CBu201D quality.
There is any option that I can prepare daily production report in grade wise.
Regards,
Mizan

Hi.....
Go to Item master data whihc you want to maintain Gradewise.
In general tab you find Serial or Batch Number under which just select Batch and select on every transaction......
This will hjelp you to manage your inventory by Batches which you consider as grade......
Regards,
Rahul

[Resolved][SCE 2010] Daily Health Report

Similar Messages

Maybe you are looking for