Resolving issues with ios7 connecting to time capsule?

We upgraded our iPhone 4s and 5 to ios7. Now, they are having really random but frequent issues connecting to the wifi provided y a newish time capsule. A first generation iPad now has the most reliable connection! Although, frequently the speed is much less than was typical.
All was good before the OS upgrade and there have been no other changes in electronics in the house. We have only about three neighbors networks that infiltrate the house - at least visible ones.
I have tried taking the time capsule off auto channel select to no avail.
My best guess is our iPhone's are the cause of the network outages on the time capsule. Some form of interference or ??
Going to map my wifi coverage later this week .... But I am betting that will tell me the coverage is generally good.
Anyone with similar issues? Any thoughts on how to resolve? Can't downgrade the iPhone software.

Look around the forums here.. there are heaps and heaps of issues with iOS 7.. it has caused more problems for wireless networking than any of the earlier ones.
https://discussions.apple.com/message/23279758#23279758
Works better with the TC in router than bridge mode.
ll was good before the OS upgrade and there have been no other changes in electronics in the house. We have only about three neighbors networks that infiltrate the house - at least visible ones.
I would ring apple support.. after all, they caused the problem.

Similar Messages

Connectivity issue with iPhone 3GS and Time capsule 7.6.1

I've upgraded the firmware of my Time Capsule. Now i have WiFi connectivity problems with my iPhone 3GS. My iMac and two iPads (version 1 & 2) are doing fine.
Very strange in this situation is when I at a rare moments are able to connect my iphone to the wifi my iPad2 connection falls out. But after a minute or 2 the system disconnects my iphone and reconnect my ipad.
For info: I'm using an iMac 27" 3.4 Intel Core i7 with Mac OS 10.7.3 - all software is updated.
Thanks for reaction
Stephan

The iphone is very sensitive to channel selection..
Open the airport utility manual settings.. Go to the wireless.. change its name to something simple without spaces.. TC24 would do nicely.
Set the wireless to b/g a/n so it works with everything .. not auto.
And set the channels manually.. 2.4ghz (which iphone uses) set channel to either 1, 6, 11.. these are the only channels that do not overlap..
Try and see if the iphone connects..
Set security.. WPA2 personal and put in a suitable key.. pure alphanumeric no spaces.

Issues with accessing HD on Time Capsule

I have a Windows 7 32 bit machine that I just built. I have a Windows XP system and a Mac Book Pro running Snow leopard. My XP and Mac are able to access the HD of my Time Capsule. My Windows 7 is having issues logging into the Time Capsule HD. When trying to log into the base station using the Airport Base Station Utility I get a message stating "Unknown user, incorrect password, or login is disabled. Please retypre the login information or contact the disk's administrator (86)." I have the AirPort Utility installed on my Windows 7 and am able to log into the settings to modify the settings of the Time Capsule. Does anyone have any insight as to how to assist me?

Note: Mac 3 had a single user on it, my son. He was the admin. I created a new non-admin acct and moved all his stuff there (Not sure I did it the right way so it took a long time.). Now I am admin on that Mac. Not sure if that is relevant here (leading to the problem identified above) but thought I would mention it.
Thanks in advance for your help.
The fact that you cannot access the backup now only on this Mac does suggest this is part of the issue. Did you do this before or after the issue with access?
Permissions can be pretty tricky things.. certainly to do backups or to retrieve them from an existing backup created with different user permissions might be a mess.. Pondini is perhaps the only one who can tell you the ins and outs of that.
On the more general note.. lots of people are having issues with USB drive on the TC from Lion.. for many it stops working forever the moment the disk spins down from a reboot.. making it useless.
But it is dog slow for everyone.. The reality is USB is less than half its native speed on the TC cf on the computer.. and it wasn't that fast to begin with.
Plug the hard drive directly into the computer and mount the sparsebundle and see if the TM then can access it.. but you might need to use your admin login not your son's.
Personally if the TC disk is not big enough.. replace the TC with a larger disk version.. or the disk in the present one.. do not use disks hanging off TC. It has enough reliability issues without adding to them.

Sporadic issues with wireless connection (dhcpcd times out)

I'm using a wireless usb adaptor Dlink DWA 110 (chipset rt73). It can connect fine some times, but many times it times out on dhcpcd. Raising the time out time causes it to hold indefinitely on the message "offered 192.168.0.132 from 192.168.0.1". Analyzing the dmesg, I see
[ 118.065433] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 507.792005] wlan0: deauthenticating from 00:1e:58:16:89:8c by local choice (reason=3)
[ 507.795984] wlan0: direct probe to AP 00:1e:58:16:89:8c (try 1)
[ 507.798617] wlan0: direct probe responded
[ 507.798622] wlan0: authenticate with AP 00:1e:58:16:89:8c (try 1)
[ 507.800482] wlan0: authenticated
[ 507.800506] wlan0: associate with AP 00:1e:58:16:89:8c (try 1)
[ 507.802986] wlan0: RX AssocResp from 00:1e:58:16:89:8c (capab=0x431 status=0 aid=6)
[ 507.802991] wlan0: associated
[ 507.816784] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
I'm writing this from an ubuntu live cd, where it works just fine. Here follows my rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="America/Bahia"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!usblp !ipv6)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="pedro"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
#eth0="dhcp"
#INTERFACES=(wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
NETWORKS=(dlink)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network net-profiles cups dbus hal netfs crond alsa webmin timidity++)
I've tried googling, but no suggestion seems to work. Any help?

This is basically a workaround, but still. You can try hold_connect script to automatically watch connection status. It can be found here: https://bbs.archlinux.org/viewtopic.php?id=103139. Just add "iwconfig wlan0 power off" string in function connect under "sudo netcfg down ..." line.

How do I connect my time capsule with a Lynksis wi fi netwotk?

How do I connect my time capsule with a Lynksis wi fi netwotk?

You cannot extend or repeat a non-apple router in an apple router..
You must plug it in via ethernet and then setup roaming network (or if you like a completely separate network.. makes no difference from the TC point of view). TC is in bridge mode. That is router bridge not wireless bridge.. I gave the info on the other thread you are running.. very confusing when you ask in multiple threads.

Can I increase the capacity of Time Machine with an external hard drive connected to Time Capsule?

Can I increase the capacity of Time Machine with an external hard drive connected to Time Capsule via the USB port? My current Time Machine has a total capacity of 1TB. I'd like to double or triple its memory. I don't want to use the external hard drive in lieu of the Time Capsule hard drive. I'd like to use it in addition to. Just don't know if/how it's possible.
This is another one of those questions that I've searched the web for answers, and have gotten tricky answers back. So now I'm trying to introduce a clean slate to the mix.
Thank you for your time!

Well, what you mentioning is possible. However, I don't know whether it's supported (as in, "easy to set up."). Time Machine officially supports backing up to a locally attached drive, to a machine running a Time Machine server (i.e. running OS X Server software), and to a Time Capsule. I don't know that it officially supports a drive attached to an AirPort or to a Time Capsule. Though I know some people have gotten it to work.
Best I can say is to try it. Plug the drive into the Time Capsule, ensure it's shared on the network, and then try and set it as a backup target from a machine in the Time Machine backup panel (you'll need to ensure it's mounted first). If it works, you're all set.

You must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

you must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

I tried to answer in your other post.. please stick to one thread ..
What method of internet do you have.. is this fibre install.. if so the TC should just plug in and use dhcp in router mode.. press and hold the reset and it will go back to router mode by default.

Why did carefully over heating my 4s restore the wifi function? This, after 2 months of mysteriously grey out wifi buttons, loads of time trying to resolve issue with apple tech only to be told I must pay $199 to repair the problem. I'm disillusioned now

Why did carefully over heating my 4s restore the wifi function? This, after 2 months of mysteriously grey out wifi buttons, loads of time trying to resolve issue with apple tech only to be told I must pay $199 to repair the problem. I'm disillusioned now

Is the Wi-Fi button greyed out? Try this article: http://support.apple.com/kb/TS1559
Also, make a backup to iTunes of the device. Then restore it as a new device. If you still have wi-fi greyed out, then contact Apple again, and explain that you believe you have a hardware issue. They may still ask for a $19 deposit, but if it is actually hardware related, then you won't be charged the $19. Only if it is software related do you get charged that $19.

Can i connect my time capsule with my router as a bridge ?

can i connect my time capsule with my router as a bridge ?

I am a bit lost .. did you work this out?? You are running a second thread.. and answered it with this question.
The TC can be bridged.. plug it into the main router by ethernet and run it in bridge mode.. that is router bridge.
Do you mean wireless bridge??
If you mean wireless bridge the answer is maybe but unlikely.
If you setup the TC to join a wireless network.. it becomes a dumb client not a bridge.
So to get it to wireless bridge you need to use another apple router.. that is the only way to get them to work.
If you want specifics ask specific questions.

TS1398 After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise. Thank you.

After the recent update of iOS 7.0.6 my phone is having issues with wifi connectivity. It gets disconnected most of the time. I went through support page and done with "Reset Network settings" too but it doesn't help. It is very toublesome while watching videos, sending pics, chatting and so on. Please advise.
It works fine in LTE network. The problem is with WIFI only.
Thank you.

Hey Siddh.s!
Here is an article that will help you troubleshoot this issue with your Wi-Fi connections:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for using the Apple Support Communities. Have a good one!
-Braden

How to connect a time capsule with an ATT Elevate Hot Spot

Hi,
Need help connecting my time capsule to my ATT Elevate Hot Spot....since I have no ethernet connection.
Thanks!

Not sure how much we can help on this, but as a test, if you turn off the wireless on your MacBook and connect it to the router using an Ethernet cable, you should be able to log onto the Internet.
If you can, you know the Ethernet connection is working, and it will be a simple matter to connect the Time Capsule to the router and get it set up.
If you cannot get an Internet connection when you connect the Mac directly to the router, then more troubleshooting will be required.

IPhone 4 & iPod Touch can connect to Time Capsule, but not Internet

My family and I have an iPhone 4, iPhone 3G & iPod Touch. Our WiFi comes from a Time Capsule. My Macbook Pro can connect to the WiFi and get online, but the iPod & iPhones can only connect to the Wifi, not actually get online.
We some issues with our ISP last week, which took some time and some messing with the settings on Time Capsule to resolve. At one point, Airport Utility asked me if I'd like to switch to bridge mode...I'm not sure if that ever happened or not, to be honest, and don't know how to see if I'm in bridge mode or not (or even what that means, really).
With my iPhone 4, I can successfully connect to the wireless network, but the icon in the top left of the screen stays on 3G (unless my service drops in my house, in which case it shows the WiFi icon but won't let me connect via Safari or any other apps).
With the iPhone 3G, it does connect, but doesn't ever show the WiFi icon.
With the iPod, it says it connects, but doesn't ever show the WiFi icon. I get the error "Safari cannot open the page. The error was: Operation coudl not be completed. Invalid argument."
Does anyone have any idea what I could do to resolve this?

I fixed this on my own. How did I do it?
1. Reset Time Capsule to factory settings (via Airport Utility)
2. Renamed my WiFi network
3. Restarted my router
Everything's fixed. I've seen this problem all over the Web but no solutions, so hopefully this will help someone.

How do i connect my time capsule from outside my home? i dont have static ip

sorry about my english...
its been 4 months now and still I am not able to connect my time capsule via internet from outside . i have read enough forums and discussion but i am confused because every discussion has different answer. please anyone can explain me the simplest way to configure my time capsule so i can connect it from other computers. i am using windows 7 64bit os.i am not advance user of networking so please explain me in detail.
some questions.
1. is it possible to use time capsule as nas using dynamic ip address?
2. if yes how and where can i get exact detail about this.
3. how to connect my time capsule form my iphone,ipad or other computers . connect through ip address or something else?
4. is it any simple installation way to do this? i heard about bonjour and icloud but dont know how to connect through this.
please help me
thank you
sachin

i am using windows 7 64bit os.i am not advance user of networking so please explain me in detail.
Here is your primary issue.. you cannot connect with win7 ..
Windows only offers SMB protocol which just about every ISP.. all responsible ones ...block..
Time Capule offers AFP to internet and only AFP.
You need to use a Mac to connect.. then use BTMM and iCloud as there is no dyndns in the TC anyway. (Actually there is a dyndns but only for apple btmm use... you cannot access.
If you want to or have to use windows.. then get a proper vpn router that offers vpn endpoints to windows and has dyndns.. setup the TC in bridge behind the vpn router and access via vpn .. this is the only safe way of connecting using SMB.

I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help, thanks.

I have a macbook pro and use BT homehub 3. can't work out how to connect my time capsule. can anyone help? thanks

Just need to plug the TC in to the hub in bridge mode.. do not try and bridge the homehub.. it is not possible with the setup BT uses.
To bridge the TC.. plug it directly into a computer by ethernet.. no other connection to the TC or the computer.
Press and hold in reset until the front LED flashes rapidly.. about 10sec.
Release the reset.
Open the airport utility and setup the TC to bridge mode.
The actual method depends on version of the OS and airport utility you use.
This is version 5.
Sorry I cannot post the v6 as I am on a snow leopard computer now. But you go to the network tab, and choose off bridge mode for method of connection. It will be NAT and dhcp by default.
Then setup wireless.. you have a number of choices here.
Either setup with the same SSID Security and password, as the homehub uses.. or a different name, and password..
Each method works fine.. but you sometimes have issues with wireless channels.. for now leave it on auto and see what happens.. if you have issues lock down the radio channels on both devices.. use one out of the following on each, 1, 6, 11 or 13 in UK.. so say 6 on the homehub then 13 onthe TC.
Update the TC.. unplug fromt the computer and plug it into the homehub.
If you have other issues with the setup tell us what OS you run so we can post suitable screenshots.

Can i connect my time capsule to my hdtv for use as an extra display for my mac book pro?

I want to use my hdtv as a display wirelessly. Can one connect their time capsule to the tv?

1. Can my TC handle "dual band" wifi or not? As it's 3 years old, I'm not sure the spec is sufficient.
They have been dual band since gen2.. yours is gen4 or at worst gen3.
2. Is the TC likely to provide better performance than the BT Home Hub router, as the Apple store suggest?
Impossible to say.. but easy to test.. simply plug the TC into the BT router in bridge mode and use it with setup to create a wireless network.. that is the way I would suggest anyway.
3. Will the BT wifi extender still work if the TC is the main router? BT aren't sure, hence asking here. "Trial and error" will take hours and because of the wifi issues in my house, can be frustrating.
Sorry this is out of my perview.. I can suggest it will be poor.. apple do not use standard settings for extend wireless.. and if it is universal repeater they also behave poorly.. Have you thought of using EOP adapters.. very popular in the UK and tend to work much better than wireless.
4. Would the BT wifi extender communciate with the TC or the BT Home Hub router?
As suggested above.. leave the BT as the main router and plug the TC bridged into it.. you can then use both..
simply set the wireless names different and keep the channels apart.
For 2.4ghz there are only 3 non-overlapping channels.. 1, 6, 11 or 13 as alternative in UK.
For 5ghz there are lots more but the lower channels work better.. so 36-48 depending on regs in the UK.

Resolving issues with ios7 connecting to time capsule?

Similar Messages

Maybe you are looking for