Resource Assignment Summary Line Not Adding Up Correctly

Hi everyone!
I have trawled through numerous sources but am yet to find a resolution to the following issue, I hope someone can help! :-)
I'm currently using MS Project 2010 (SP2) along with PWA/Project Server 2010 and I'm having some issue with the assignment summary line for in the resource usage view not adding up hours correctly.
I have a resource that is working on multiple projects that are stored in project server.
When I first open up server I ensure the "Load assignments" tick box is checked.
I open up one of the project schedules and navigate to the resource usage view. It's showing some confusing figures at the summary line that sometimes doesn't add up the hours under the "Other Projects and Commitments" section.
I have reviewed the tasks in all the project schedules that the resource has been assigned work and they are all set to "auto schedule" and are a combination of manual and flat based work contoured assignments.
When I have all schedules from project server open (checked out and not read only) the summary line that adds up resource work hours changes to the correct figure.
Is this a bug in MS project or is there a setting that I am missing?
Happy to send a couple of example screen shots to anyone who is willing to help me.
Thanks in advance!
Pete

Pete:
In order to see the correct totals, you actually need to open all of the projects in question.
Gary Chefetz, MCITP, MCP, MVP msProjectExperts
Project and Project ServerFAQs
Project Server Help BLOG

Similar Messages

WBS Summary does not shows the correct Orignial Duration

Hi Friends,
Currently I am using WBS Summary or Level of Effort type of activity on top of my every WBS and I am assigning all my resources to that activity to save the time rather than assigning resources with each and every activity.
But, in my new project I have the activities which has a scattered durations like one activity starts on 3 rd day another starts on 25th day. So, my project is not planned to go smooth or linear. So, if I am counting the total duration for that particular WBS is 25 days but in WBS Summary it shows me 250 days and it is also spreading my resources for 250 days while I am using the resources only for 25 days. Still, the resource usage and costing shows me the same amount.But, I am concern about the resource Usage Assignments which is not correct.
So, I will appreciate any kind of solution with this problem and it will make my life easier.............
Thanks in advance
Edited by: user13349410 on Jul 6, 2010 10:19 AM

Jawad,
i agree the methods you mentioned are good general advice when it comes to sound planning. but they are considerably more time consuming than proper
"who does what" resource assignment to tasks. further more #2 and #3, may need even more manual work to accomodate changes into the project schedule or scope or when dealing with conflicting requirements.
proper resource loading of your schedule is preferable, even using conventional default settings such as:
- linear distribution of effort (units/ costs). no curve or future bucket planning which IMO, depending on required level of detail, can prove to be overkill;
- activity driven resource dates. whenever possible, it is much simpler to "split" activities or better yet create as many as you need in the first place, so that resource allocation start/finish dates coincide with activity start/finish dates for all resources assigned to the activity, rather than having resource lags, non-linear curves or future buckets;
- no artificial constraints on activities, but proper relationships of required type and lag;
- no fixed artificial non-working periods set in activity and/or resource calendars (other than legal/ organisation/ project standards dictate or are so set by technical, workflow, environment or availability reasons that may apply).
especially since calendars are likely to have different requirements, when existing calendars are reused within project and especially in other projects (global calendars).
best regards,
Tibi

Numbers: Cell time calculation not adding the correct time

Greetings,
First, thank you in advance for your assistance. I have searched the board and where there are many great formulas, I have not found the answer to this challenge.
Cell A1 has a time for example 5:45 PM
Cell C1 has an amount of minutes for example 40
Cell B1 should be adding 40 minutes to 5:45 PM for result of 6:25 PM
Cell A2 picks up the value of Cell B1 as its starting value so that it can calculate the same formula for the next line.
This document is a schedule so that it adjusts the times based on the amount of minutes a segment is. I can post an excel file if that will assist, the excel formula for this in the B cell is A1+TIME(0,C1,0)
Again thank you in advance for any assistance in solving this challenge.
John

=TIME(HOUR(A),MINUTE(A)+C,0)
• Every time I may use them, I uses the "short references", those with no row num embedded.
• The TIME function requires three parameters,
a number of hours,
a number of minutes
a number of seconds
but the formula parser is fair enough to understand that, when the given number of minutes is greater than 59, it means some hours + some minutes.
And of course, mutatis mutandis, it's the same for the number of seconds.
This is why, when I want to display with the current format hh:mm:ss a decimal time value as those resulting of calculations, I don't spent time to isolate the number of hours, the number of minutes, the number of seconds. I just calculate the total number of seconds.
if cell B2 contains 0.1234490740741
I type =TIME(0,0,B24*6060) in cell C2
Then, applying the yy:mm:ss format I get 02:57:46
inserting =TIMEVALUE(C) in D2, I get 0.1234490740741
I know that this behavior is not described in the Help.
I don't feel that it's a sin.
It's for passing this kind of details that the forum exists.
I feel perfectly odd questions whose response is available in the Help but it's always a pleasure to help users to discover features which are only available "between the lines".
Yvan KOENIG (from FRANCE vendredi 4 juillet 2008 14:48:21)

Graphs (line)- not showing timing correctly (X-Axis)

SSRS 2012
Hi guys
My dataset produce a column express as HH:mm:ss. So it means several rows by hours
The report is build up with a graph - Line.
Unfortunately, the Y axis (the horizontal axis showing timing) displays all the records correctly, but the X axis does not display each timing record (labeling).
Question:
how to show each record along the x-Axis (I tried to adjust the setting in the x-Axis properties without success)
Thanks

Hi Fasttrack2,
As per my understanding, there is a line chart, the records of Y-axis display correctly, labels of X-axis are not displayed entirely. You want to show each label of X-axis.
The axis interval defines the number of labels and accompanying tick marks on an axis. On the value axis, axis intervals provide a consistent measure of the data points on the chart. However, on the category axis, this functionality can cause categories
to appear without axis labels. We can specify the number of intervals we want in the axis Interval property. When we show properly formatted DateTime values on an axis, a chart will automatically display these values as days. To specify a date/time interval
for the x-axis, such as an interval of months or an interval of hours, we must format the axis labels and set the type of axis interval to a valid date or time interval. In this case, if the values displayed on the x-axis must evaluate to a DateTime data type,
we can set x-axis labels’ interval type to seconds by following steps:
Right-click the horizontal, or x-axis, of the chart, and open Horizontal Axis Properties.
Click Number in left pane. From the Category list, select Date, from the Type list, select a date format to apply to the x-axis labels.
Click Axis Options in left pane.
In Interval, type 1. In Interval type property, select Seconds.
For more information about Specify an Axis Interval, please refer to the following document:
http://msdn.microsoft.com/en-us/library/dd239317(v=sql.110).aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

Storage Space Not Adding Up Correctly?

This past September I attempted to upload a 1.3 GB zip file. The upload appeared to finish, however, it never appeared in the cloud. I originally posted about this issue and seeing the space taken. At the time the space was assumed to be the trash as I had not permanently deleted the trash and it had many files, and since the file was not there I assumed the upload had failed.
That brings us to now, according to the Creative Cloud website I have 6.7 GB of storage space currently used. However, if I add up what I have stored in there I reach 5.5 GB of storage space used. I thought maybe this was the trash or archive and when I look, there were no files in the archive as I have deleted them recently (when I last deleted the archive the files didn't total more than 100mb).
Is this "missing file" actually there and not displaying? Why do I see a discrepancy in storage space?
Thanks for any assistance!

We have fixed the issue.

Credit for adding new lines not added been several months

I haven't gotten the 150 dollar credits added to my accounts yet it has been several months. If a customer rep see this could they please contact me. I have been on the phone several times with no luck. I cancelled with altell in good faith and spent 800 dollars coming over to your company.

There were 4 phones in total added to the account. I was told 600 would be added to my account.

Task types without resources assigned

Hi,
I hope someone can help me figure this out. May sound dumb, but hey, no harm in asking.
Since task types, resources and effort driven option all tie in together, does it matter if using Fixed Units or Fixed Duration for tasks don't have resources assigned and are
not effort driven? What difference will it make since 2 entities are not being used?
FYI - Project tasks are currently as Fixed Units.
Thanks

Hi,
As you well defined that all these parameters (Work, Work type, Units & Durations) are tied and formula too works based on the values in these fields. Duration = Work/Units so the moment you take off units from the formula you are taking off the calculation
functionality (related to these parameters) of the tool and everything gets dependent on your manual inputs.
Even though based on the value you manually enter in work or % complete your actual work and remaining work plus remaining durations etc. do get calculated, yet I would say assign the resources to reach out to factual calculations.
Sapna Shukla

Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding [and I'm at my wit's end!]

I originally posted this question to the community section and was advised to post it here. Please bear with me as this will be a long post. I'm including the scenarios involving this reoccurring issue, the trouble shooting steps I've already
taken and the results of several diagnostic tools and logs.
I have a Sony VAIOS VPCEBB33FM lap top since 2011. I have had this issue on an off for a long time. I'm at my wit's end. Any new insights or suggestions would be greatly appreciated.
Scenario Details
1) Some times it's on and off through out the day, sometimes it won't work all day, and once in a while it will work fine for the entire day.
2) I've had this issue across several wireless services, Clear Network accessed with WiMax, Library Wi-fi, Comcast cable internet using wireless router and Wi-fi, and Comcast Xfinity Wi-Fi, to name a few examples.
3) Other devices in the household or library will work with no problems such as my smart phone or my roommates' laptops or desktop computers.
4) Once in a while, the built-in wireless adapter is not found and I have to reinstall the driver. Also the diagnostic tool has had to reset my adapter on an increasing basis.
5) I had my hard drive replaced in December 2014 and my system restored from the System Restore disks that came with it when I bought the laptop. Even though I've been online on an infrequent basis it worked just fine for a while. Now that
I've been online a bit more I'm having the same issues again.
Below are my attempts at trouble shooting so far but I still have not been able to consistently resolve my DNS issues
1) Restarting my adapter
2) Turning off my laptop and removing the power supply for 5-10 minutes before turning it back on.
3) Using the IP Config in Command Prompt
     ipconfig /flushdns
   ipconfig /registerdns
   ipconfig /release
     ipconfig /renew
4) Using the NetSh reset in Command Prompt and restarting my laptop
     netsh int ip reset c:\resetlog.txt
     netsh winsock reset
     ipconfig /flushdns
     [restart laptop]
5) Configuring the TCP/IP in several settings
    Select Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
    I have used the following settings:
       a) Obtain an DNS server address automatically
       b) OpenDNS
           208 67 222 222
           208 67 220 220
       c) Google DNS
           8 8 8 8
           8 8 4 4
6) Updating the driver for my Intel Centrino(R) Advanced-N 6250 AGN and Intel Centrino(R) WIMAX 6250 from the Intel website previous having my laptop wiped clean in 2014. It still did not resolve the issue. My laptop
manufacturer as not come up with an driver update for my adapter since 2010. I haven't tried to update the adapter driver from Intel's website since having my laptop repaired due to the fact that Intel strongly recommending using the manufacturer's updates
instead and frankly it didn't make much of a difference when I did it the first time.
7) The last one I've tried as of today is going into Services and changing the start up type to automatic for the following:
       Computer Browser [changed from manual to automatic]
       DHCP Client [already set to automatic]
       DNS Client [already set to automatic]
       Network Connections [already set to automatic]
       Network Location Awareness [changed from manual to automatic]
       Remote Procedure Call (RPC) [already set to automatic]
       Server [already set to automatic]
       TCP/IP Netbios helper [already set to automatic]
       Workstation [already set to automatic]
...and I'm still having DNS issues.
My only guessing are that my laptop came with a lemon adapter that needs to be replaced, some advanced setting(s) that I'm not aware off, or my firewall/anti-virus is interfering. I've used Symmantic Anti-virus and Firewall in the past and currently
Avast Anti-Virus with Microsoft Network Firewall. I've had DNS issues with both anti-virus/firewall set ups.
Below are the results from the diagnostics and tests that I've ran.
Windows Network Diagnostics
Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding Detected Detected
Contact your network administrator or Internet service provider (ISP) Completed
Windows can't communicate with the device or resource (DNS server). The computer or service you are trying to reach might be...
Details about network adapter diagnosis:
Network adapter Wireless Network Connection driver information:
   Description . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6250 AGN
   Manufacturer . . . . . . . . . : Intel Corporation
   Provider . . . . . . . . . . . : Intel
   Version   . . . . . . . . . . . : 13.2.1.5
   Inf File Name . . . . . . . . . : C:\Windows\INF\oem17.inf
   Inf File Date . . . . . . . . . : Monday, June 14, 2010 9:05:44 AM
   Section Name . . . . . . . . . : Install_MPCIEX_GEN_6250_AGN_2x2_HMC_WIN7_64_MOW
   Hardware ID . . . . . . . . . . : pci\ven_8086&dev_0087&subsys_13018086
   Instance Status Flags . . . . . : 0x180200a
   Device Manager Status Code . . : 0
   IfType . . . . . . . . . . . . : 71
   Physical Media Type . . . . . . : 9
Informational Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
Information for connection being diagnosed
Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
Interface type: Native WiFi
Connection incident diagnosed
Auto Configuration ID: 1
Connection ID: 1
Connection status summary
Connection started at: 2015-03-07 19:57:14-186
Profile match: Success
Pre-Association: Success
Association: Success
Security and Authentication: Success
List of visible access point(s): 22 item(s) total, 22 item(s) displayed
        BSSID       BSS Type PHY   Signal(dB)   Chnl/freq    SSID
60-02-92-C6-D3-E8   Infra   <unknown>   -62       11   HOME-C7D4-2.4
60-02-92-A1-75-E0   Infra   <unknown>   -58       6   HOME-B917-2.4
00-1D-D5-D5-34-F0   Infra   <unknown>   -73       6   HOME-34F2
60-02-92-A1-75-E1   Infra   <unknown>   -58       6   (Unnamed Network)
06-1D-D5-D5-34-F0   Infra   <unknown>   -78       6   xfinitywifi
C4-27-95-C9-C4-2D   Infra   <unknown>   -57       1   HOME-C42D
02-1D-D5-D5-34-F0   Infra   <unknown>   -74       6   (Unnamed Network)
00-0D-97-07-E0-79   Infra   g   -75       6   (Unnamed Network)
00-1D-CF-2A-44-C0   Infra   <unknown>   -86       6   HOME-44C2
02-1D-CF-2A-44-C0   Infra   <unknown>   -86       6   (Unnamed Network)
F8-E4-FB-3C-87-A2   Infra   <unknown>   -89       6   YVNM7
06-1D-CF-2A-44-C0   Infra   <unknown>   -87       6   xfinitywifi
0C-F8-93-7A-13-50   Infra   b   -87       6   PKennedy
06-F8-93-7A-13-50   Infra   b   -89       6   xfinitywifi
02-F8-93-7A-13-50   Infra   b   -87       6   (Unnamed Network)
E0-88-5D-C8-A9-DC   Infra   <unknown>   -80       1   HOME-A9DC
E2-88-5D-C8-A9-DD   Infra   <unknown>   -79       1   (Unnamed Network)
16-CF-E2-43-0B-30   Infra   <unknown>   -88       1   xfinitywifi
60-02-92-F0-A8-C0   Infra   <unknown>   -90       11   HOME-96A6-2.4
60-02-92-C6-D3-E9   Infra   <unknown>   -63       11   (Unnamed Network)
02-1D-D4-EB-87-00   Infra   <unknown>   -88       11   (Unnamed Network)
06-1D-D4-EB-87-00   Infra   <unknown>   -88       11   xfinitywifi
Connection History
Information for Auto Configuration ID 1
List of visible networks: 13 item(s) total, 13 item(s) displayed
BSS Type PHY   Security   Signal(RSSI)   Compatible   SSID
Infra   <unknown>   Yes       63   Yes       HOME-C7D4-2.4
Infra   <unknown>   Yes       70   Yes       HOME-B917-2.4
Infra   <unknown>   Yes       43   Yes       HOME-34F2
Infra   <unknown>   Yes       70   Yes       (Unnamed Network)
Infra   <unknown>   No       40   Yes       xfinitywifi
Infra   <unknown>   Yes       71   Yes       HOME-C42D
Infra   g   No       43   Yes       (Unnamed Network)
Infra   <unknown>   Yes       28   Yes       HOME-44C2
Infra   <unknown>   Yes       20   Yes       YVNM7
Infra   b   Yes       21   Yes       PKennedy
Infra   <unknown>   Yes       33   Yes       HOME-A9DC
Infra   <unknown>   Yes       35   Yes       (Unnamed Network)
Infra   <unknown>   Yes       16   Yes       HOME-96A6-2.4
List of preferred networks: 3 item(s)
   Profile: xfinitywifi
    SSID: xfinitywifi
    SSID length: 11
    Connection mode: Infra
    Security: No
    Set by group policy: No
    Connect even if network is not broadcasting: No
    Connectable: Yes
   Profile: HTC Portable Hotspot 9F50
    SSID: HTC Portable Hotspot 9F50
    SSID length: 25
    Connection mode: Infra
    Security: Yes
    Set by group policy: No
    Connect even if network is not broadcasting: No
    Connectable: No
     Reason: 0x00028002
   Profile: belkin.332
    SSID: belkin.332
    SSID length: 10
    Connection mode: Infra
    Security: Yes
    Set by group policy: No
    Connect even if network is not broadcasting: No
    Connectable: No
     Reason: 0x00028002
Information for Connection ID 1
Connection started at: 2015-03-07 19:57:14-186
Auto Configuration ID: 1
Profile: xfinitywifi
SSID: xfinitywifi
SSID length: 11
Connection mode: Infra
Security: No
Pre-Association and Association
   Connectivity settings provided by hardware manufacturer (IHV): No
   Security settings provided by hardware manufacturer (IHV): No
   Profile matches network requirements: Success
   Pre-association status: Success
   Association status: Success
    Last AP: 06-1d-d5-d5-34-f0
Security and Authentication
   Configured security type: Open
   Configured encryption type: None
   802.1X protocol: No
   Key exchange initiated: Yes
    Unicast key received: No
    Multicast key received: No
   Number of security packets received: 0
   Number of security packets sent: 0
   Security attempt status: Success
Connectivity
   Packet statistics
    Ndis Rx: 2068
    Ndis Tx: 2543
    Unicast decrypt success: 0
    Multicast decrypt success: 0
    Unicast decrypt failure: 0
    Multicast decrypt failure: 0
    Rx success: 3954
    Rx failure: 0
    Tx success: 537
    Tx failure: 4
    Tx retry: 2
    Tx multiple retry: 2
    Tx max lifetime exceeded: 0
    Tx ACK failure: 18
   Roaming history: 0 item(s)
InformationalDiagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Auto Configuration
Initialize status: Success
Information for connection being diagnosed
Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
Interface type: Native WiFi
Result of diagnosis: There may be problem
Network Connection details from Command Prompt (some info hidden for security reasons)
Connection-specific DNS Suffix:
Description: Intel(R) Centrino(R) Advanced-N 6250 AGN
Physical Address: ‎00-23-15-54-19-B8
DHCP Enabled: Yes
IPv4 Address: 192.168.X.XX
IPv4 Subnet Mask: 255.255.XX.X
Lease Obtained: Saturday, March 07, 2015 7:57:14 PM
Lease Expires: Saturday, March 07, 2015 8:24:44 PM
IPv4 Default Gateway: 192.168.X.X
IPv4 DHCP Server: 192.168.X.X
IPv4 DNS Servers: 75.75.75.75, 75.75.76.76
IPv4 WINS Server:
NetBIOS over Tcpip Enabled: Yes
Link-local IPv6 Address: fe80::b8de:3ac9:e166:XXX%XX
IPv6 Default Gateway:
IPv6 DNS Server:
Results of Ping and Trace Route in Command Prompt
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>ping 127.0.0.1
Pinging 127.0.0.1 with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.0.0.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Windows\system32>ping www.youtube.com
Pinging youtube-ui.l.google.com [173.194.121.6] with 32 bytes of data:
Reply from 173.194.121.6: bytes=32 time=24ms TTL=55
Reply from 173.194.121.6: bytes=32 time=19ms TTL=55
Request timed out.
Request timed out.
Ping statistics for 173.194.121.6:
    Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
Approximate round trip times in milli-seconds:
    Minimum = 19ms, Maximum = 24ms, Average = 21ms
C:\Windows\system32>ping 74.125.239.34
Pinging 74.125.239.34 with 32 bytes of data:
Request timed out.
Request timed out.
Reply from 74.125.239.34: bytes=32 time=3286ms TTL=50
Request timed out.
Ping statistics for 74.125.239.34:
    Packets: Sent = 4, Received = 1, Lost = 3 (75% loss),
Approximate round trip times in milli-seconds:
    Minimum = 3286ms, Maximum = 3286ms, Average = 3286ms
C:\Windows\system32>ping www.hotmail.com
Pinging dispatch.kahuna.glbdns2.microsoft.com [65.55.157.204] with 32 bytes of data:
Reply from 65.55.157.204: bytes=32 time=111ms TTL=237
Request timed out.
Request timed out.
Reply from 65.55.157.204: bytes=32 time=1537ms TTL=237
Ping statistics for 65.55.157.204:
    Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
Approximate round trip times in milli-seconds:
    Minimum = 111ms, Maximum = 1537ms, Average = 824ms
C:\Windows\system32>ping 207.46.11.236
Pinging 207.46.11.236 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 207.46.11.236:
    Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
C:\Windows\system32>tracert www.youtube.com
Tracing route to youtube-ui.l.google.com [173.194.121.5]
over a maximum of 30 hops:
1    19 ms    13 ms    17 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2    13 ms    13 ms    27 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net [68.85.192.205]
3    20 ms    26 ms    21 ms he-5-10-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.94.249]
4    18 ms    34 ms    22 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5    19 ms    18 ms    18 ms 50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
6    35 ms    18 ms    18 ms 209.85.249.217
7    21 ms    19 ms    19 ms 72.14.233.93
8     *        *        *     Request timed out.
9     *     2509 ms   677 ms iad23s25-in-f5.1e100.net [173.194.121.5]
Trace complete.
C:\Windows\system32>tracert 74.125.239.34
Tracing route to nuq04s19-in-f2.1e100.net [74.125.239.34]
over a maximum of 30 hops:
1    54 ms    23 ms    12 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2    22 ms    19 ms    17 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3    19 ms    19 ms    18 ms he-5-14-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.166.121]
4    18 ms    18 ms    18 ms he-0-15-0-0-cr01.350ecermak.il.ibone.comcast.net[68.86.85.74]
5    19 ms    18 ms    22 ms 50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
6    22 ms    36 ms    19 ms 209.85.249.217
7    26 ms    23 ms    25 ms 209.85.143.112
8     *        *        *     Request timed out.
9     *        *        *     Request timed out.
10   972 ms     *        *     216.239.51.97
11   148 ms    97 ms    95 ms 216.239.46.241
12   324 ms   130 ms   432 ms 209.85.246.252
13     *        *        *     Request timed out.
14 1403 ms   101 ms   126 ms nuq04s19-in-f2.1e100.net [74.125.239.34]
Trace complete.
C:\Windows\system32>tracert www.hotmail.com
Tracing route to dispatch.kahuna.glbdns2.microsoft.com [65.55.157.144]
over a maximum of 30 hops:
1    13 ms    13 ms    25 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2    13 ms    15 ms    13 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3    20 ms    19 ms    17 ms he-5-13-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.145]
4    17 ms    20 ms    20 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5    17 ms    18 ms    38 ms as8075-2-c.ashburn.va.ibone.comcast.net [173.167.58.82]
6    18 ms    18 ms    36 ms ae4-0.ash-96cbe-1a.ntwk.msn.net [207.46.36.172]
7     *        *        *     Request timed out.
8     *     2191 ms    35 ms ae0-0.atb-96cbe-1b.ntwk.msn.net [191.234.81.167]
9     *        *        *     Request timed out.
10     *        *        *     Request timed out.
11    86 ms    84 ms    84 ms ae4-0.lax-96cbe-1a.ntwk.msn.net [191.234.83.150]
12    86 ms    86 ms    87 ms ae9-0.by2-96c-1a.ntwk.msn.net [207.46.42.176]
13     *        *        *     Request timed out.
14     *        *        *     Request timed out.
15     *        *        *     Request timed out.
16     *        *        *     Request timed out.
17    87 ms    84 ms    85 ms origin.by173w.bay173.mail.live.com [65.55.157.144]
Trace complete.
C:\Users\C.Cunningham>tracert 207.46.11.236
Tracing route to origin.by181w.bay181.mail.live.com [207.46.11.236]
over a maximum of 30 hops:
1    16 ms    16 ms    19 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2    18 ms    13 ms    13 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3    21 ms    19 ms    21 ms he-5-12-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.141]
4    18 ms    21 ms    18 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5     *        *        *     Request timed out.
6     *        *        *     Request timed out.
7     *        *        *     Request timed out.
8     *        *        *     Request timed out.
9     *        *        *     Request timed out.
10     *        *        *     Request timed out.
11     *        *        *     Request timed out.
12     *        *        *     Request timed out.
13     *        *        *     Request timed out.
14     *        *        *     Request timed out.
15     *        *        *     Request timed out.
16     *        *        *     Request timed out.
17     *        *        *     Request timed out.
18     *        *        *     Request timed out.
19     *        *        *     Request timed out.
20     *        *        *     Request timed out.
21     *        *        *     Request timed out.
22     *        *        *     Request timed out.
23     *        *        *     Request timed out.
24     *        *        *     Request timed out.
25     *        *        *     Request timed out.
26     *        *        *     Request timed out.
27     *        *        *     Request timed out.
28     *        *        *     Request timed out.
29     *        *        *     Request timed out.
30     *        *        *     Request timed out.
Trace complete.
Results of Intel WiFi Manual Diagnostics
Test Name                 Test Result   Test Summary
Hardware Test           Passed        Wireless Hardware is enabled
Driver Test           Passed        Diver is loaded. NETwNs64 Version 13.3.0.24
Radio Test                  Passed       Radio is ON
Scan Test                   Passed       There are 25 Networks available to connect
Association Test        Passed       Associated
Authentication Test   Passed       Authenticated
Signal Test                Passed       Signal Quality: Poor
Ping Test                  Failed          No Reponse: default gateway, DHCP server
I hope this information is enough to get to the root of this problem once and for all. Please let me know if you any other information such as event logs or statistics.
Thanks in advance.

Results of Intel WiFi Event View Log (I deleted some lines since there were basically repeats of the same messages)
#Event Source Time
Error Severity    Domain
User      Description
45           EvtEngine
3/8/2015 20:40 Success
Connection         SYSTEM
iAMT - Failed to read Windows Events Log
46           S24EvMon
3/8/2015 20:41 Information
AppDriver
SYSTEM
Getting List of adapters.
47           S24EvMon
3/8/2015 20:41 Information
AppDriver
SYSTEM
Intel adapter(s) found.
156         S24EvMon
3/8/2015 20:47 Information
Driver    SYSTEM
AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
157         S24EvMon
3/8/2015 20:47 Information
Driver    SYSTEM
ATC 06:1d:cf:2a:44:c0 xfinitywifi 6 RSSI=-88
158         S24EvMon
3/8/2015 20:47 Error
Driver    SYSTEM
AssociationFailure 06:1d:cf:2a:44:c0 xfinitywifi 6 CNCT_GENERAL_FAILURE
159         S24EvMon
3/8/2015 20:47 Information
Driver    SYSTEM
AddToExclude 06:1d:cf:2a:44:c0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
160         S24EvMon
3/8/2015 20:47 Information
Driver    SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
161         S24EvMon
3/8/2015 20:47 Success
Driver    SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
162         S24EvMon
3/8/2015 20:47 Success
Driver    SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -77
163         S24EvMon
3/8/2015 20:49 Information
TCP/IP SYSTEM
VoIP: Got link down - deleting flows .
164         S24EvMon
3/8/2015 20:49 Information
Driver    SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-88
165         S24EvMon
3/8/2015 20:49 Error
Driver    SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
166         S24EvMon
3/8/2015 20:49 Information
Driver    SYSTEM
AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
167         S24EvMon
3/8/2015 20:49 Information
Driver    SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-89
168         S24EvMon
3/8/2015 20:49 Error
Driver    SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
169         S24EvMon
3/8/2015 20:49 Information
Driver    SYSTEM
AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
170         S24EvMon
3/8/2015 20:49 Information
Driver    SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-90
171         S24EvMon
3/8/2015 20:49 Error
Driver    SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
172         S24EvMon
3/8/2015 20:49 Information
Driver    SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-82
173         S24EvMon
3/8/2015 20:49 Success
Driver    SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
174         S24EvMon
3/8/2015 20:49 Success
Driver    SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -81
175         S24EvMon
3/8/2015 20:50 Information
Driver    SYSTEM
AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
176         S24EvMon
3/8/2015 20:50 Information
Driver    SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
177         S24EvMon
3/8/2015 20:50 Success
Driver    SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
178         S24EvMon
3/8/2015 20:50 Success
Driver    SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -80
179         S24EvMon
3/8/2015 21:03 Information
Driver    SYSTEM
RoamTrigger 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-81 MisBcn=8 RSSITh=-85 Roam Other Reason
186         S24EvMon
3/8/2015 21:21 Information
General
SYSTEM
DeviceIoCtrlS24NDIS: (2) Failed to send OID 0xff100055 to driver. Error - 31
187
S24EvMon
3/8/2015 21:21 Information
General
SYSTEM
DeviceIoCtrlS24NDIS - Dot11ExtNicSpecificExtension failed (31)

A have new problem that has appeared in my Mac Mail. When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name.

A have new problem that has appeared in my Mac Mail. When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name. I have gone to the window pop-down to 'previous recipients' and deleted that addressee as well as all the email addresses it is assigning to that name. I have also deleted the account entirely from my address book. I have have run repair permissions and also full defrag in iDefrag. Still the problem persists. Any suggestions?

Hello CarolineLongEaton,
I noticed you posted this problem quite a while ago and wondered if you managed to have it fixed in an alternative way then posting here. It is too bad no one has posted a solution here. I have a similar problem and if you have had yours solved since this occurance how you accomplished it may help me with mine. I am interested to know what you have done about yours.
If you are interested in comparing the problems to see if your solution (if you have found one) might help me also then here is the link to the discussion.
https://discussions.apple.com/thread/6116927
If your problem has not been solved then I will comment here again if/when my issue is resolved as it may help you too. My hope here is that we may help each other. To quote you "all ideas gratefuly recieved". I hope your problem was resolved, ernestly for your sake and selfishly for mine also. I wish you and yours a great day!
dofromon

Party Resource selected from the Assignment Manager is not available on SR

Party Resource selected from the Assignment Manager is not available on Service Request.
Hi,
Im working on Oracle Customer Support and observed the following.
I imported a party (dealer) from AR and created it as a resource.
Then created a Service Request, assigned Tasks to the service request and then tried to assign the task to the imported resource using Assignment Manager.
In the assignment manager searched for the resources using Unassisted search. In the resource type selected 'Party Resource'. Found the party resources by clicking on the search button.
Double clicked on the party resource and specified the Start Time and End Time.
After clicking on the Ok button, the selected party resource is not available in the Service Request Form.
Can somebody please help me in this matter. I want the party resource on the service request form.
Thanks in advance.
Regards
Anil

Shiv,
Thank you for your reply. I don't have access to the production instance..but I will definitely recommend the solution. I did these steps in test instances earlier whenever I had this error. But they used to go away after bouncing app server.
Now, some of the functions are available to the responsibility without any modifications..seems like it takes a while for the newly added functions to a menu to propagate in the E-Business system.
What confounds me is that even after a mid-tier bounce, the system didn't pickup the menu changes.
Regards,
Arun

ECC IM report, the available and assigned budgets are not correct

Hi All
Can any one tell me why there is a difference in the ECC IM report, the available and assigned budgets are not correct on program position level.
But individual investment order level, they are correct..
The report we are running is : S_ALR_870122806 .
Any help higly appreciated and points are assigned .
Cheers
ravindra .

Hi,
Tcode GR23 , Under 1VK Report library, Choose Characteristics Tab for Company Code Select BUKRS,and GSBER for Business Area.
Regards,
Shankar K B

When Role is assigned to User through membership rule then it's membership is not added to OID ?

Hi All,
I have OIM 11gR2 installed with LDAPSync enabled.
When tried to assign Role to User through membership rule, Role is successfully assigned to User in OIM, but it is not added in OID.
Role membership is added in OID when User requests Role through Catalog search. Also, Role membership is added in OID after running job 'LDAPSync Post Enable Provision Role Memberships to LDAP '.
How can I add Role membership in OID as soon as Role is assigned to User through membership rule in OIM ?

Hi
It sounds like you have not selected anything on the Presentation & Data tab of the Workspace Startpoint/User Service.
You need to specify:
Your Asset (the form you want to present to the user)
An associated Action Profile (tells the server how you want the form rendered...typically it is set to Default which uses the Render PDF Form process)
The variable to hold your data(typically an xml variable)
Make sure these are set.
Diana

JPanel not added correctly

Hi
When the following code is invoked upon an item in a combo box being selected for the first time the gPSX_JPanel is removed but sSVI_JPanel is not added until I click anywhere on the application. After this the code works fine.
Can anyone suggest why?
Thanks
public void wasteWaterModel_JComboBox(ActionEvent e){
      if(wasteWaterModel_JComboBox.getSelectedItem().equals("SSVI"))
         tank_JPanels[2].remove(gPSX_JPanel);
         tank_JPanels[2].repaint();
         tank_JPanels[2].add(sSVI_JPanel);
         tank_JPanels[2].repaint();
}

Hi
I have tried this:
public void WasteWaterModel_JComboBox(ActionEvent e){
      if(WasteWaterModel_JComboBox.getSelectedItem().equals("SSVI"))
         Tank_JPanels[2].remove(GPSX_JPanel);
         Tank_JPanels[2].repaint();
         Tank_JPanels[2].add(SSVI_JPanel);
         Tank_JPanels[2].repaint();
         System.out.println("THIS WORKED");
}and 'THIS WORKED' always gets printed. When I first select the item SSVI in the combo box then GPSX_JPanel is removed so part of it seems to work. I just can't work out why SSVI_JPanel is not added until I click anywhere on the application.

How can we get the Latest Resource Assigned in the Approval Form

I was wondering if there is any way to get the Latest Assigned Resources to a User in my Approval Form.
I tried this <ref>waveset.resourceAssignments</ref> but it returned all the Resources assigned to a User. While creating a User with Resource Assigned it won�t be problem. While Update when a User is assigned a Resource & it comes for Approval to the owner, all the Previously assigned resources shows up. How can I get only the Latest Resource Assigned.
Can anyone provide some hints on this..

idm_guy, if you could elaborate more on what you mean with latest resource assigned it would help - but there are a number of options (if i interprent you correctly to solvethis). My guess is that the easiest way would be to determine if:
waveset.accounts[<iterate through resources>].created = true or false
and if
waveset.accounts[<resource>].lastPasswordUpdate = <last updated date>
The latter is of course only applicable to resource where you set a password. This value will be updated whenever you set the password and could be a possible value to check against.
If the account is not created yet but assigned it might be another possibility to check, but again - clairfy a bit about what you mean with "Latest Resource Assigned".
/Anders

CProjects-MS Project - import and export of task-role-resource assignment

Hi,
We are on PPM5.0
We are currently working on cProjects-MSP client integration.
What we have not been able to configure for import/export so far is:
1. Task-Role-Resource assignment
Whereas we are are able to import/export the "Person Responsible" and "Role Responsible" fields, we have not been able to align the task-role-resource assignments.
We see a "Resource Name" column (Standard) in MSP. When we click on the drop down, we see all the roles from the cProjects project. But the alignment does not happen.
Summary:
On export and import, we need to automatically see the role-resource-task assignment. How is this possible?
2. Code field to "VC_BUPA_GUID" gets a number which is not the BP ID.
Is it possible to import the BP numbers in MSP. Also, how can we assign a number to the role in MSP such that on import into cProjects, the role is already staffed with the corresponding BP.
3. Is it possible to export all the resources (BPs) into a drop down in MSP - like we see the Project Type, Role Type etc.
Thanks.

Hi Anuradha,
Thanks for your inputs.
When we export to MSP, we see the cProjects roles under the "Resource Name" drop down in MSP.
However, they are only seen when we expand on the drop down.
For e.g. RoleA, and RoleB are two roles in cProjects project, along with many other roles.
Both of these roles are assigned to a task, say TASK1.
When exported to MSP, we expect both of these roles to show against TASKI, as "RoleA, RoleB" under the "Resource Name" column. However, these roles are not seen. They only appear as elements of drop down, along with all other roles in the project, when we explicitly click on the drop down.
Please let me know if I are missing out on something.
Thanks.

Resource Assignment Summary Line Not Adding Up Correctly

Similar Messages

Maybe you are looking for