Resource capacity utilization report

Hi,
Is there any standard report for Resource capacity utilization after SNP run.
Any standard extractor/data source is available to build the report?
Regards,
Krunal

Hi Krunal,
1) The report /N/sapapo/cdps_rept should be sufficient...use the selection restriction to 'restrict ' by Rosurce,Time period--In the output ofthe report,yuou would see 'bucket consumption',relatively on the Right side..
2) I would urge you to read the note:1296446 too
Thanks and Regards
Suresh

Similar Messages

Capacity Utilization Reports no data

Hi all, starting a new thread as none of the similar threads have been able to resolve my issue.
We have System Center 2012 SP1 on Server 2012, SCOM VMM, SM, Orchestrator, App Controller etc.
When I run the Capacity Utilization report I only have data returned for PIF, Net transfer, Capacity Utilization and Dick IO all return;
No data available. Possible causes include::
The performance rules for the report have not been enabled in the VMM Reports MP.
No computers match your selection criteria.
I am adding the Hyper-V host to the report, I have also added the Windows server objects to the report.
The SCOM host has the execution policy set to Unrestricted as per one post I have found. Pro Tips do work when tested.
I did find this blog :
http://blogs.technet.com/b/rexzh/archive/2013/08/20/scvmm-2012-sp1-capacity-utilization-report-missing-data.aspx
But where do we locate the stored procedures?
If I look at the monitoring views I see performance data against the Hosts.
Please assist

Hi,
Please run the following command on the management server.
set-executionpolicy Unrestricted
If the issue persists, I suggest you post in VMM forum to get more insights.
http://social.technet.microsoft.com/Forums/systemcenter/en-US/home?category=virtualmachinemanager
Niki Han
TechNet Community Support

Capacity utilization report (Labour)

Hi
We are developing workcenter capacity utilization report.
We have taken available capacity from KAKO table and function module.
Actual finished set up hrs we are taking from AFRU -ISM01/ILE01
My issue is for capturing confirmed set up hrs AFRU is the correct table or any other table is there.
when i am testing some production orders set up time values are not flowing into the developed report.
In which table we can see confirmed set up/processing times etc.
regards,
srihari.M

Dear
Check the Work Centre assingin in the operation overview screen -then double clcik on this -Goto Work Centre Basic data Tab -Check the Standrda Value Key -Stndard value drives the three Setup , labout , machine to be entre or must be entred or not .
If Rule for maintainec is not for Set up , then this will not come up in Confirmation screen also and hence in your customised report .Or you may be having Set up hrs which have not confirmed yet .Based on this SVK , you will choose the Formula key for Scehdule , capactiy and also Csoting tab to calcuate the same.
Check this and come back
regards
JH

Resource Capacity Utilization Question

Hi, Please let me know if the following scenario is a possibility.
We currently maintain our capacity utilization at 90% for any resource and the same number is carried over to APO with CIF. The requrement we have is to set this utilization to 100% for the rolling current date+3 months and 90% outside the 3 month horizon. I know that the dates can be specified explicity but I don't know if the rolling 3 month is possible. Please let me know if this can be achieved via config.
Thanks in advance.

Dear ,
I would request you to post the thead in SDN APO forum .
I do not think so there is a scope of this requirement in SAP R/3 but APO PPDS can give you a solution for the same .
Regards
JH

Plant /Resource Capacity utilization & dowtimes

Hello Experts,
Iam looking to develop a BW-KPI report for plant loading % utilization where i need to analyse the breaktimes,downtimes,and max available production times of a resource from the PPDS plan data for next 1 year .
Iam looking if anyone has got a similar requirement implemented and want to know your approach .
Did anyone used "Plan monitor" in APO to solve similar kind of requirement?
Regards
Roa

Hello Roa,
try transaction /SAPAPO/CDPS_REPT.
Best regards
Thomas

Report for calculating capacity utilization and Efficency

Hi,
We are following REM in our company. The production line is defined in the production version. While backflushing the production line is called automatically and hence backflushing is done.
We calculate the capacity utilization by using the formulae.
Capacity Utilization = (Backflushed Qty/ Available capacity)*100.
My queries are:
1. Is there any standard report to determine the capacity utilization of a production line.
2. Is there any standard report to calcualte the efficency of a production line.
waiting for reply.
With regards,
Afzal

Hi afzal
1. you have mentioned ; Available capacity = Std.time per piece * no. of working hrs
Let me explain with example
suppose per piece if it takes 10 mins, now according to your formula
A.C = 10* 24 * 60 = 14400 per day, but which is not correct
normally if 10 mins/ peice means 6 peices/hr and for 24 hrs 24*6 = 144.
so it must be A.C = no. of working hrs / Std.time per piece.
2. You have mentioned = capacity utlilised = total Backflushed qty per day., which means you are caluculating capacity utilization based on input material.
3. Utilization = (Avaliable capacity/ Capacity utilised) * 100
suppose let us consider Available capacity per day =100
capacity utilized = 50
Utilization = (100/50) * 100 = 200%, which is not correct it should be only 50%
Here my main doubt is why You are caluculating capacity based on input material.
Please explanin me you business process and whats the exact requirement so that I can help you out.
Please check the formulae

How to view/generate resource utilization report

hi
I have used 3 resources in project , and wanted to know how to generate report of overall individual project utilization.
we don't use any project server here.
Thanks
Ragav

Hi,
Do you use Project 2010 or 2013?
Both versions propose
visual reports with a "resource work summary report" Excel template.
Otherwise if you do not need to export the data in Excel but only to vizualize the data, the resource usage view is an excellent way to see the resources utilization on a project.
Hope this helps,
Guillaume Rouyre, MBA, MVP, MCP |

Capacity Utilization by network activity for each period

Hi all,
How do i find out the capacity utilization at the network activity level. My requirement is to findout the remaining requirement/capacity of a workcenter for each period, which will be the cumulative value of the non utilized resources/hours for the previous months, based on distribution key.
The same functionality is there in CM07, but what is the exact functionality and how it can be reimplemented in a report?

Hi,
Check if table KAKO helps. You may have to calculate the remaining capacity from available and utilised.
Regards

FM / Bapi to read capacity utilization

Hi,
Is there a BAPI to read capacity utilization for a product-location combo? Or do we have any other means?
regards,
shan

if what you mean is the Capacity utilization of the resources...
you can see the utilization in the planning book 9ASNP94 capacity view
you can extract this using the BAPI for Planning book
there are other ways of extracting this too :
You can also use /SAPAPO/CDPS_REPT - Order and Resource Reporting
or in the planning board by choosing the Evaluation >> Resources
sure of a BAPI but some of these reports might give you a clue about the FM used

Storage bin Capacity utilization is greater than 100%

Hi,
Via LS03N, I can found that some capacity utilization is greater than 100%, this must be incorrect, what's the reason? is there any report to update the capacity utilization for storage bin?
Kindly please advise.
Thanks

For the capacity checks, the remaining capacities or the used weight in the storage bin master data are updated with every putaway or picking. If you change the inspection method in the current operations or you change capacity or weight data of materials or storage unit types, you then need to make a comparison of the data. You can make this comparison with report RLS10200. First read the documentation before you start the report.

Changing Capacity Utilization for selected days before and after a CTM Run

I have a number of resources with their respective capacity utilizations. I am running CTM which requires the resource utilizations for all the resources to be at 100%.
Can I do that with 2 capacity variants for the resource with 100% and X% utilization and switch them as and when required. My Problem is that when i create a capacity variant from say date A to date B .. the period between these comes as blocked. Is there a way to correct this.

Request you to go through help documents
http://help.sap.com/saphelp_scm41/helpdata/en/92/a57337e68ac526e10000009b38f889/content.htm
http://help.sap.com/saphelp_scm41/helpdata/en/2e/847337613fbc40e10000009b38f8cf/frameset.htm

Cisco PI 2.1 can't generate CPU utilization report

Hi Expert,
I just want to generate a CPU utilization report for my test router, I follow cisco offical documents step by step.
But unlucky, there's no result be display when I finished run the report.
Can anyone come cross this issue? Please help me to solve this issue.
The config detail please refer to attachment (Pic1, 2, 3)
Thanks in advance,
The PI display this error:
No data matches the specified criteria for the report
make user that the following background tasks are running:
1.controller performace
2.switch CPU and Memory Poll
BR
Frank

It's a VM.
I chose the Express-Plus profile even though I could technically have used the Express profile for what they're managing. I always try to err on the side of more resources when building a management system. Getting a customer to adapt their workflow to properly leverage a NMS is hard enough without it also being a drag to use due to system sluggishness.
We're also running it on a nice new shiny data center - UCS B240 series blade with fast storage on Netapp SAS disks and connected directly to the 7010 core (via the Fabric Interconnect of course).

CTM - 15454 reporting report utilization reports needed

I have many Cisco ONS 15454's deployed, and I need a way (I presume from CTM) to
run reports to show
1 - Circuit utilization (how many STS-1's and for which clients are provisioned on all spans)
2 - Capacity report (how much capactiy in STS-1's are available on all spans)
It is too time consuming to manually export circuits provisioned from each span when the
network changes constantly, and the number of nodes too. This leads to constantly out
dated spreadsheets and inacurate data on capacity, utilization.
Basically I need to run reports against all things circuits on the ONS boxes.
I would be willing to use 3rd party software too, which would talk with CTM I presume?
Who else has this issue?
--Scott

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
Hello Scott,
You may automate this by directly querying and parsing Oracle CTM database. I don’t have a ready to use script but here is an idea.
For example link utilization is kept in Link_Utilization_View and links are kept in Link_Table.
Database Schema Tables
http://www.cisco.com/en/US/docs/net_mgmt/cisco_transport_manager/9.0/db_schema/developer/guide/90sctbl.html#wp2576140
Database Schema Views
http://www.cisco.com/en/US/docs/net_mgmt/cisco_transport_manager/9.0/db_schema/developer/guide/90scview.html
Here is how to get this information is html formatted file:
su – oracle
sqlplus ctmanager/ctm123!
SQL> spool /tmp/links.html
SQL> set markup html on
SQL> select * from link_table;
SQL> select * from Link_Utilization_View;
SQL> set markup html off
SQL> spool off
Now the information is in /tmp/links.html which you can parse.
En example from my net. let’s take a span between Node 14 port 6/1 and node13 port13/1:
bash-3.00# su – oracle
Blowfish% sqlplus ctmanager/ctm123!
SQL*Plus: Release 10.2.0.3.0 - Production on Thu Nov 4 14:33:51 2010
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL>select LINKID from Link_Table where LINKNAME='Node14:6/1 - Node13:13/1';
    LINKID
        35
SQL> select CKTTYPE,CKTSIZE,CKTUNIQUEID,CKTNAME from Link_Utilization_View where LINKID='35';
   CKTTYPE    CKTSIZE CKTUNIQUEID CKTNAME
         1          1          11 BRT
         1          1          11 BRT
         1          1         114 Link2
         1          1         114 Link2
======================
CKTTYPE 1 is STS_CIRCUIT and CKTSIZE 1 is STS1 (from Database Schema Tables). Hence i have 2 STS1 circuits on that span.
Regards,
/A

Tcode for display of capacity utilization

Gurus,
can u please supply me with the t code for display of capacity utilization at all work centres at plant level. I also need scheduling reports.
Thanks

Hi
In CM01 ,enter work center and plant.click on standard overview.You get week wise(you can change settings as per your wish day wise/month wise also)requirements,available capacity ,capacity load and remaining available capacity.
select one period and click on capa details/ period .The report shows tha materials, scheduling dates and pegged requirement qty.
Regards,
Rajaram.K

Create a site utilization report for SharePoint Site with these conditions

HI,
How do we create a site utilization report for a SharePoint 2007 site. I want to include the following conditions in the report
a) The list of users who are accessing the site
b) The list of users who have not accessed the site ( Can we do some filtration based on some conditions )
c) When was the last date the user has accessed the site

Hi Kalpana,
Sorry for delay in reply. I don't think this can be possible from front end without involving SQL dbo users table. If you found any other alternate please share here.
You can get site collection / sub site user details via
SP user manager tool and for last access date - time you can use SharePoint object model. - ref : http://blogs.msdn.com/b/varun_malhotra/archive/2010/05/12/moss-2007-get-last-accessed-date-for-a-site.aspx
Let us know if this helps
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

Resource capacity utilization report

Similar Messages

Maybe you are looking for