Resource consumption in different bucket

Hi all,
we have some planned orders which are created by optimizer and they
have start date and end date are in different bucket then the total
resource consumption is showed in the bucket where start date of the
order fall. that means actually there is no over consumption of
resource and production is falling under next bucket as per end date.
When we observe the same in capacity planning book its showing in some
buckets as capacity over loaded and production is showing in next
bucket. Logically it should not the case.
Kindly suggest how to proceed in this senario
Thanks in advance.
Regards

THX

Similar Messages

  • I am using FCPX 10.1.3. and want to duplicate my project, and its complete resources, to a different hard drive.  When I click "duplicate", it automatically duplicates the project in its current hard drive.  How do duplicate to a different hard drive

    I am using FCPX 10.1.3. with Yosemite, and want to duplicate my project and its complete resources to a different hard drive.  When I click "duplicate", it automatically duplicates the project in its current hard drive, unlike the previous FCPX that gave you options. How do duplicate to a different hard drive?

    Since projects are now stored in events and events are stored in libraries, you need to create a new l;bray on that different drive or open an existing library on that drive. Then duplicate your project and move it to the new library. It will copy the media. Then use the Consolidate Project File command to round up any external assets; there may or may not be any.
    Russ

  • Resource consumption details not shown for each row source operation

    Hi Friends,
    I have generated a tracefile for a query as shown below.
    set autotrace traceonly arraysize 100
    ALTER SESSION SET optimizer_mode = ALL_ROWS ;
    alter session set tracefile_identifier = 'trcwithtime_221010_03';
    alter session set events '10046 trace name context forever, level 12';
    spool on
    spool C:\Sree\trcwtime.log
    -- put your statement here
    SELECT e.*,d.dname
    FROM scott.emp e
        ,scott.dept d
    WHERE e.deptno = d.deptno;
    spool off;
    exitBelow is the trace file
    SELECT e.*,d.dname
    FROM scott.emp e
        ,scott.dept d
    WHERE e.deptno = d.deptno
    call     count       cpu    elapsed       disk      query    current        rows
    Parse        1      0.00       0.00          0          0          0           0
    Execute      1      0.00       0.00          0          0          0           0
    Fetch        2      0.00       0.00          4          7          0          14
    total        4      0.00       0.00          4          7          0          14
    Misses in library cache during parse: 0
    Optimizer goal: ALL_ROWS
    Parsing user id: 173 
    Rows     Row Source Operation
         14  HASH JOIN 
          4   TABLE ACCESS FULL DEPT
         14   TABLE ACCESS FULL EMP
    Elapsed times include waiting on following events:
      Event waited on                             Times   Max. Wait  Total Waited
      ----------------------------------------   Waited  ----------  ------------
      SQL*Net message to client                       2        0.00          0.00
      db file sequential read                         4        0.00          0.00
      SQL*Net message from client                     2        0.41          0.77
    ********************************************************************************For each rowsource operation, resource consumption details (cr,pr,pw,time) are not shown in the TKPROF output.
    How can i get these details as well?
    DBVersion: 9.2.0.8
    Regards,
    Sreekanth Munagala

    Sreekanth Munagala wrote:
    For each rowsource operation, resource consumption details (cr,pr,pw,time) are not shown in the TKPROF output.
    How can i get these details as well?
    DBVersion: 9.2.0.8You can get those details by setting values for following parameters (at session level, preferably) before generating the 10046 trace.
    ALTER SESSION SET statistics_level = ALL ;
    ALTER SESSION SET timed_statistics = TRUE ;

  • SegregatingTable data into different bucket with equal numebr of

    Hi Guys,
    I wanted to process table data in chunks not all the rows at a time. How can we achieve this in oracle.
    Example :
    I have one table EMP which has ten thousands rows(10,000) rows. Now these ten thousands rows are joined with other tables to process data and it takes time. So I wanted to pass one thousands rows at a time as an input to the procedures so that processing should happen only with 1 thousands rows at a time. This table does not have any primary key. So it there any method in oracle using that I can segregating the tables data into different buckets with equal number of rows.
    I have used DBMS_PARALLEL_EXECUTE but its taking lots of time. Any help will be appreciated.

    I have one table EMP which has ten thousands rows(10,000) rows. Now these ten thousands rows are joined with other tables to process data and it takes time.
    OK... So this is your actual problem. And the solution you are trying to come up with does not sound promising. So lets take a step back and re-think our strategy here. First thing would be how about we see some code? Show us your code that you say is running slow. And we can take it from there. The number 10,000 is a very small number. And if that is causing performance issue then you are in some big trouble.
    And also it wouldn't hurt if you could read this Re: 3. How to  improve the performance of my query? / My query is running slow.

  • Does hiding controls/indicators on the front panel significantly effect computer resource consumption?

    I remember reading something about transparent controls and indicators leading to overhead processing... does hiding controls/indicators have similar or ANY negative effects?

    There's a difference between "effecting resource consumption" and "affecting resource consumption" - I assume you mean "affect".
    There's a difference between a transparent control and a hidden control - Hidden means the VISIBLE property is set to FALSE, and certain optimizations can be done - it doesn't have to draw anything. If a control is set to transparent, it will still go through the motions of converting that integer to text (or whatever), and then draw nothing (the decision is made later, so more time is taken).
    A transparent control can still react to mouse clicks. A hidden one cannot.
    It shouldn't affect any memory consumption, except for a video frame buffer.
    It's not clear from the question whether you mean the ACT of hiding t
    hem (the turning OFF of the visible property), or the fact that they may be hidden.
    Steve Bird
    Culverson Software - Elegant software that is a pleasure to use.
    Culverson.com
    Blog for (mostly LabVIEW) programmers: Tips And Tricks

  • Resource Consumption between WLP 8.1 and 10.3

    Hi there,
    Is there any document about comparison in term of performance and resource consumption between the same portal application running on version 8 or 10?
    Thanks.

    No.
    In all probability the bottleneck will be your application, not the portal framework, so any test would need to be done for your application.
    Weblogic Server is definitely faster and JDK1.5 is way faster than 1.4 so you would see improvements.
    regards
    deepak

  • Production Quantity with Resource Consumption - 9ASPROD

    Hi ,
    Could anyone please tell me how keyfigure 9ASPROD - production(total) which is assigned to keyfigure function 6003 (Production Quantity with Resource Consumption ) is calculated . 
    We can view this keyfigure in Capcaity check Data view of planning book 9ASNP94.
    Thanks in Advance.
    Regards,
    Srini

    Hello Srini,
    It calculates in this way: operation end date on production resource +
    GR processing time.
    The best regards,
    Michel Bohn

  • Consumption from different plant

    hello,
    I want to have consumption in different plant than delivery plant.. (depending upon sales org & division) eg: I want to deliver from Plant A but consuption should happen always at Plant B after PGI.. i want to see this in MD62 after PGI.. When i do reverse of PGI, consumption should add back to Plant B (from where it is consumed) ..I have created a table with sales org & division and maintained plant from which you want to consume and made some correction in function module LE_ATP_RV_REQUIREMENT_GENERATE, but it doen't work.. Pl can you suggest the way where I can make it happen..

    Hi Kishore,
    we have many plants under one sale sorg, we want to have consumption happen under one plant whenever sales happens from all these plants.. eg: I have IN01, IN02, IN03 plant for sorg IN00, when I use IN01 as consumption plant then I can put demand on this plant,,

  • Fixed PPM/PDS resource consumption and fixed PPM/PDS material consumption

    hi experts
    while going through help.sap to find out the meaning of linear optimization i came across two phrases  ""fixed PPM/PDS resource consumption and fixed PPM/PDS material consumption""   i have worked on SCC03 PPM and curto_simu PDS   but i couldn't make out what these phrases means . my perception is that every shop floor  operator is given a target to produce certain number of quantities  per shift on a production line .Does these phrase means that ??  or it has some other connotation. ?? 
    experts can you please provide clarity on those phrases.what does it actually mean ?

    sahu it is even more confusing see  "Fixed PPM consumption is the fixed time required independent of quantity produced."" 
       fixed time of what ??   is it the resource timing or shift timing
    Time required to produced material consumption quantity = Fixed cons + variable cons
    can i say it is the time required to produce a given  lot size quantity ??
    sahu would  you please put it in very layman terms.

  • PIR consumption at different plant

    Hello dear gurus,
    Here's a tough one; I have a situation (quite common) where there's a supply chain with one manufacturing plant and a number (like 4) of distribution plants. (CPG)
    Normaly in SAP in such a situation you need to maintain PIRs for each distribution plant (there's where sales take place), and with special procurement key relate the supply to the manufacturing plant.
    Thing is that in my case customer is not willing to maintain PIRs for each DC, but rather have one global forecast (at manufacturing plant level). To accomodate that I made a development that reflects the available stocks in DCs as supply elements in MFG. plant, so we can run one MRP planning run to get production planning.
    My yet unsolved problem is the incorrect consumption of PIRs. I use strategy 10.
    Ideally was if I found a way to consume planning in the MFG plant with sales in the DCs.
    Any ideas?

    Dear,
    If you are maintaining the PIR in manufactering plant system will take the stock of manufactering plant.
    Requirement will flow from DC to manufactering plant, In this case you maintain the requirement from in the form of PR from DC, how the system will understand the requirement from DC.
    Hence correct and stright forward way is you need to maintai n stg 40 in C and maintain special stock indicator. Hence system will create PR after considering the stock at DC.
    If this is not the case, you need to go for ZMRP.
    Please come back your view is different and looking for some thing different

  • Resource assigned two different Skills

    HI.  If i have a resource assigned to two different Skills that are both set to Longest Available, which skill would take precedence?  Is this where I should use the Competence level to give one Skill a priority over the other? 
    Scenario is Resource A and B are in both Skill 1 and 2.  Skill 1 & 2 are both set to Longest Available.  A&B are the only members of both Skills.  No resource groups. 
    Does the system somehow keep track of which Resource is Longest available to the Skill? 
    Thanks in advance for your help.

    I am assuming you are talking in regards to UCCX (as oppose to UCCE), if so skills do not have routing algorithms, CSQ do, skills get assigned to CSQs, are you CSQ to one to relationship with skills? If so, and if agents belongs to both skills and 2 calls are queued when the agent becomes available the longest available call will be delivered. If you want to prioritize one CSQ call over another you need to use Priority step in the script.
    HTH,
    Chris

  • Resource Consumption

    Hi,
    We are using CTM to create PP/Ds order using PP/DS PPM, we have used Multimixed resource in the PPM definition.
    The number of capacities defined is 3 and available time is 24 Hrs, so total available capacity for a day is 72 Hrs.
    Now when we are planning for demand of 72 KG with throughput as 1Kg per Hr, the system should schedule the order at the start of the day and complete the order in one day assuming that 100% resource capacity is available.
    But when we take the CTM run it is creating a Planned Order which occupies the capacity of one resource for 3 days, i.e. it occupies only 1/3rd capacity and remaining 2/3rd capacity is idle.
    The expected result for me is that the system should consider the total available capacity irrespective of the no of capacities defined for the resource and create one planned order even if it occupies multiple capacities for the same resource
    Can anyone please suggest how I can consider single capacity for multiple resource of same type using CTM and PP/DS PPM.
    Thanks & Regards,
    Sanjog

    Sanjog,
    I have never done this in CTM, but in PP/DS you achieve this with splitting the orders across resources (work centers).
    In ECC, in the routing, in the detail of the operation, set the 'required splitting' flag, and then set the number of splits at three (CA02).
    Re-cif across (in order to eliminate confusion, it is probably best to delete the old PPM in APO first).  Now, in your PPM, you will see in the PPM operation Mode, the Fixed continual consumption is '3' and the variable duration has been reduced to one/third of the original value.
    Rgds,
    DB49

  • Resource consumption in zones

    Let's say I have a beefy x86 box with 4 CPUs and 32Gb of RAM. Let's also say that I set up 30-50 zones on this machine, each one running a different web application (or sets of web applications), or just doing generic web serving.
    What are the constraints around TCP/IP load in this scenario (e.g where is the first limit I'll hit)? Will there be significant performance degradation as the zones start consuming huge numbers of TCP connections each?
    What about total number of processes? Am I limited to the process limit of the global zone?
    Thanks,
    -chris

    Zones themselves will not add any additional constraints in this
    situation. Think of them as a partitioning mechanism - if you had
    run the same workloads in just the global zone, there would be
    some characterization of the TCP/IP load on the system. Placing
    those workloads into individual zones will not increase the load
    on the system - rather, you've split the existing workload into
    separate pieces, so to speak.

  • Experience about resource consumption about migration SQL- server to MaxDB

    Hi,
    Has somebody experience about migration MS SQL server (running under MS Windows) to MaxDB (Linux). Right now DB size is 2TB and SAP system is used about 1000 SAP users. I need information how cpu- and memory- consumption will change. Otherwise which requirements have to make for target database especially SAPS and hardware design. 
    Mit freundlichen Grüssen
    Andreas Sartor

    Check
    https://www.sdn.sap.com/irj/sdn/maxdb
    --> "Ensuring a Successful Database Migration to SAP MaxDB"
    I would book that service.
    The people doing that have lots of experience in diagnosing possible problems before the migration and will give you a lot of useful tips.
    Markus

  • ITunes 7 Resource Consumption

    Upgraded to iTunes 7 and it is hogging resources. This results in many symptoms that have been reported here already.
    My system is unusable while running iTunes 7 after upgrading today from 6.05.
    Very weird how one piece of software can mess up your life style.

    One single Airport Express (I only own one) and I an just trying to play to the Airport Express.
    I have tried selecting multiple speakers but it make no difference, it can't be ticked in the box, even though it is visible.
    I have a lot of Mac experience by the way, so I have checked and tried all the usual and unusual things. Even tried turning the Firewall off but no joy.
    Ian

Maybe you are looking for