Resource create error

Hi Experts,
I am facing following error while creating resource in CRC1
Mismatch Between Plant and Cost Center
What to do?

Hi
check the Cost Center assigned to the resource. also check the CC is assigned to BA.
Regards
Anupam Sharma

Similar Messages

Error message "failed to load an application resource (internal error)" when checking form in LiveCycle preview PDF

After creating a form, when I click on Preview PDF, I am now getting an error message "Failed to load an application resource (internal error)". Not sure why this has started recently, but it makes it impossible to check my forms for clients before I send them. I can open them outside of the program in Adobe Reader, but it is faster to check the form within LiveCycle and change them if necessary. Please help!

I fixed mine! In Reader 9 and 10.0 I had disabled the ReadOutLoud feature as it kept popping up whenever it felt like it, and I don't need ReadOutLoud. What worked for me was first to purge the system of Reader 9 - the uninstall routine leaves stuff behind. Then I went into the Reader 10 program folder, located the plug_ins sub folder, and renamed it to oldplug_ins. Then I ran the repair routine which recreated the plug_ins subfoler.. All now works, except that the <expletive deleted> ReadOutLoud is up to its old tricks again, but I can live with that for now.
Hope this helps.

Synthetic FibreChannel Port: Failed to start reserving resources with Error 'Insufficient system resources exist to complete the requested service.' (0x800705AA)

Hello Gurus
i have installed windows server 2012 RTM with Hyper-V. i already created virtual machine with virtual fiber channel adapter connected to physical one. sometimes when i restart the virtual machine it gets failed to start again and the following error appears
in the event viewer of the host:
error id 21502
'Virtual Machine xyz' failed to start.
'xyz' failed to start. (Virtual machine ID number)
'xyz' Synthetic FibreChannel Port: Failed to start reserving resources with Error 'Insufficient system resources exist to complete the requested service.' (0x800705AA). (Virtual machine ID
number)
'xyz': Operation for virtual port (C003FF18F98C000E) failed with an error: No physical port available to satisfy the request (Virtual machine ID
number).
error id 1069
Cluster resource 'Virtual Machine xyz' of type 'Virtual Machine' in clustered role 'xyz' failed. The error code was '0x5aa' ('Insufficient system resources exist to complete the requested service.').
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover Cluster
Manager or the Get-ClusterResource Windows PowerShell cmdlet.
appreciate your help
Ashraf

Dear All,
Subject : Need to create a file cluster
in Guest Vms (Host machine : Windows 2012 R2), using MSA p2000 strorage with HBA Qlogic (HP 8Gb PCIe Host Bus Adapter)
Note: It's a direct connection from HBA to HP MSA p2000 (No SAN switch in between)
Currently I am using Qlogic HBA (HP
81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter- Part No. AK344A).
Unable to create vPort using Microsoft
Hyper-V (Win 2012 R2) & secondly using QConverge
Console utility.
When trying to create Microsoft
Hyper-V (Win 2012 R2), I received the below error.
Secondly, when I am trying to create vSAN switch in using Qlogic QConverge Utility the above error is popup.
Currently I am using the following latest version of Qlogic Firmware & Drivers...
HBA - Running Firmware Version: 7.00.02
HBA - Driver Version: STOR Miniport 9.1.11.24
If any body the same issue, Please could you update me as earliest.
Regards,
Mirza

Resource Bundle error

Hi,
I'm getting a resource bundle error but i'm not quite sure what it means:
Can't find resource for base name PackageName.ClassName, locale en
What exactly is the "locale"? The class compiles but once i use it in my jsp i get this error.
Thanks, in advance

"This step shows how the Locale, the properties files, and the ResourceBundle are related. To create the ResourceBundle, invoke the getBundlemethod, specifying the base name and Locale:
ResourceBundle labels =
ResourceBundle.getBundle("LabelsBundle", currentLocale);
The getBundle method first looks for a class file that matches the base name and the Locale. If it can't find a class file, it then checks for properties files. In the PropertiesDemo program we're backing the ResourceBundle with properties files instead of class files. When the getBundle method locates the correct properties file, it returns a PropertyResourceBundle object containing the key-value pairs from the properties file."
If it can not find either a class or properties file it will through the exception that you are seeing. Check your directory structure in the jar file and make sure it is correct for what you are trying to access.

"Resource Busy" error during image creation,using disk utility when booting up from installation DVD

Hi all, first post to this community, wish all well
I have a MBP which is more than three years old, installed with OSX Leopard 10.6. Recently the MBP failed to to start and I tried to follow some articles online, including some from this community, to repair my disk, and more importantly, to backup data on the startup disk. But it does not work quite well so I try to seek some help here.
What I have done is to bootup with the installation DVD, try to verify and repair the disk using disk utility, which tells me it can't repair and recommend to backup, erase and reinstall. Am fine with this recommendation but now the problem is on the backup part. There are two partitons on this 500GB hitachi SATA disk. One is 300G which is for OSX itself, and the other 200G was partitioned for Time Machine. The repair failure is on the OSX partition which contains most of the recent data that I want to backup/restore. And unfortunately the Time Machine backup was stopped about two month ago, for some stupid decision I have made , while I am hoping to recover some data for the past month.
Currently the SMART status of the whole disk is verified, the OSX partition is unmounted with no details in the Available, Used, Number of Files, etc. From what I have researched (correct me if I am wrong), I highlight the OSX partition from the list on the left, click 'New Image' button on top, and select the destination to try to create an image of the current partition. But regardless of my desintation (Time Machine partition, or external USB drive), the imaging process always failed with Resource Busy error. Some online search suggest that the partition must be in unmount status but seems it does not apply to this case.
Would be really appreciated if anyone can give me some advice on what's the 'resource busy' error mean, how to backup the OSX partition, or what are the other possible alternatives.

Very poor idea to keep the Time Machine backup file on the internal hard drive. They should always be put on an external drive. As when the internal fails you lose everything. Which is what I suspect has happened.
More then likely your internal drive is failing. the only options to get a new internal drive and a SATA to USB adapter. Install the new drive inside the system abd install OS X on it. Then once that is finished and you are booting from it connect the old drive to the system with the SATA to USB adapter and copy your files off the old drive. That is if you can.

"Error in creating error file" message

Tried to install Palm Desktop 6.2 that came with my new Centro and at the end the message "Error in creating error file" keeps popping up numerous times.
What can be the reason?
Post relates to: Centro (AT&T)

I was also experiencing the "error in creating error file" message multiple times during installation on my XP Pro system. I googled the error message and found this post plus a reference to a problem with riched32.dll) in in another post. But that didn't help. After quite a bit of troubleshooting on my own, I found the problem. I had moved the "My Documents" folder under "D:\users" to simplify my backups. Apparently the Palm installer needs the "My Documents" folder on the C: drive. I temporarily put "My Documents" back into it's default location under "C:\Documents and Settings" and the Palm installer ran just fine with no error message. I then moved everything back under "D:\users" including the folder "Palm OS Desktop", that was created by the Palm installer and everything has been working fine since.
Thought I'd share this with others, as it's not an obvious fix.
Post relates to: Palm TX

Creation of logical index terminated. Join index create error.

Hi to all,
After running for a few weeks fine. See my earlier message Delete and recreate BWA index of a cube in process chain.
Chains are "terminating" again. I get the following error messages:
Creation of logical index '[Technical Cube_name]' terminated. Error text:
Join index create error;index=bwp_[technical cube_name],location
=nlscli63:30203 2433
Creation of BIA index for InfoCube '[Technical Cube_name]' terminated during activation
A manual deletion by the program RSDDTREX_INDEX_DELETE and a recreation in RSDDV is necessarry to get the index active.
Has anyone a clue on beforehand what is happening or same experiences, before i put in a SAP OSS message.
Regards,
René

Hi
Firstly please ensure that no error exists for the cube when you are
trying to create the index. You can check that in RSRV. Also you need
to check if no change run or loading is occuring.
Please also check that you are not using the backup mode mutual
as this can cause the problem, please refer to the SAP note 1383228.
Best Regards,
Des Gallagher

Even after resets get "The backup disk image "/Volumes/FreeAgent GoFlex Drive/MacBeth (2) 1.sparsebundle" could not be created (error 22)."

HELP! "The backup disk image “/Volumes/FreeAgent GoFlex Drive/MacBeth (2) 1.sparsebundle” could not be created (error 22)."
TC estimates over 750GB for full backup.
Late 2010 MBA is connected wirelessly to
802.11n (1st gen) TC that is connected via ethernet hub built into house to motorola router using charter.com for internet.
I have had same problem for over 150 days and multiple reboots, restarts in proper order, firmware updates, unplugs with 5min plus gaps, bypassing the tc and using external 500gb WD mybook via usb to time capsule, replacement of the WD mybook to new 2TB Free Agent GoFlex drive, etc, etc, etc! Note: I originally named my MBA hard drive MacBeth, but at some point months ago, it said backup already existed and system automatically created MacBeth (2), worked for a while, then stopped again, despite trying nearly daily.
I gave up and started using Carbon Copy Clone daily for just the 128gb on internal SSD of my late 2011 11" MacBook Air, but need to get past these time capsule errors to back up the external disk! Due to lack of space in MBA, I had long ago transferred both itunes and iphoto and all imovie/fcpx files to a 1tb external disk (WD Passport) that I keep in my bag with MBA. It is partitioned with 150gb for cloning the MBA, and over 750gb for media/itunes/iphoto/etc.
Also, I have endured months of "your hard drive is full" messages and system lockups, applying the solution given to me by genious bar (deleting all aol.com outboxes/recovered messages/spam/trash under library/mail/V2/Mailboxes folders, empty trash, restart....watch recovered hard drive space mysteriously shrink next couple days to zero.....repeat)
Due to lack of space, I had not been able to do javascript and other system updates. Yesterday, I noticed even safari bookmark bar had mysteriously emptied (not disappeared, I can hide and show the space where the bar used to be - it is just blank area with no data except for eyelass-book-topsites icons), so I transferred a few large quicktime movie files recorded with isight camera to the external disk, and freed up 20 gbs for the first time!
This got my hopes up yesterday because after I completed all system/software updates, suddenly the bookmark bar showed up and I was able to start the time capsule backup! It took overnight preparing for backup, but finally started and progressed to 12gb of the 100gb+ needed (i guess the update where it left off months ago for the estimated 750gb for the full backup?), then I put system to sleep and took it with me (thus leaving the wireless time capsule network as I do daily fully expecting it to continue when I returned home in the evening.) But alas, upon return, back to the "Time Machine could not complete backup, The backup disk image ".....sparsebundle" could not be created (error 22)" Ugh! More reboots, unplugs, 5min gaps....still Ugh!
So the problem continues...please help! Here are my settings:
About this mac:
Mac OS X V. 10.7.5
processor 1.6 ghz intel core 2 duo, memory 4 4g 1067 MHz DDR3
software up to date!
Airport Utility:
V 6.2 (620.33)
both internet globe and TC show green dots in graphic, however internet occasionally shows yellow then goes to green, but still gets error 22. Suddenly TC showed explanation mark and says lost connection and asked if I wanted to 'forget', gave same errors, then mysteriously went back to green, but still got error 22!.
Internet:
connection: connected, displays router address, 2 dns server, and domain name: charter.com
Time Capsule:
shows network, ip address, serial number, version 7.6.3, status: (green dot) Setup over WAN,
wireless clients: phones, macbooks (including this MBA), printers, wii
If you need other settings to help me, just ask! I have read a few of the other solutions in forums, but trying not to erase disks, especially since it worked for a minute yesterday!

To step sideways.. why not just use CCC to backup the 750GB of the hard disk to the TC.
You need to understand this is going to be a super slow process and each time you stop it.. it is going to give issues. CCC will at least do a more reliable job of it than TM.
I would also say.. this is going to be tough without ethernet. You need to understand the backup speed over wireless can be 10GB per hour.. that makes 75hrs to backup the disk. The air needs to run non-stop doing that.. without you touching it.
I would get another external drive.. plug that into the MBA and if you really want to use TM.. make a backup one to the other.. but CCC will again do a better job and work faster. It will be much faster than over wireless.
I am trying to think of ways around the issue of just speed.. but plainly you have lots of other issues.. being the simple unreliablity of the TM to identify the TC.
If you want to make this work.. give yourself a weekend.
Load 5.6 utility into the MBA..
http://support.apple.com/kb/DL1482
Take the TC back to 7.5.2 firmware. It is a really old version and latest firmware does it no good at all.
Wipe its hard disk using erase and start over.. give it new names for everything.
So call it TC
Set the wireless to 5ghz and name it TC5ghz
Use WPA2 Personal security. Use a 10 character passkey non dictionary.
At 5ghz you should get 2x the speed as at 2.4ghz but the air will need to be right next to the TC..
(alternatively buy the USB to ethernet cord apple have available.. it is $30 in the apple store and do it over pseudoethernet. http://store.apple.com/au/product/MC704ZM/A/apple-usb-ethernet-adapter That is the wrong store but you get the idea. )
WIth a fully clean system.. now do a full reset of TM.
See A4 http://pondini.org/TM/Troubleshooting.html
Direct the TM to back to the TC.. and make sure the external hard disk is not excluded.
Of course the TC has to be 1TB version to fit that much data.. goes without saying right.
Even over pseudo - ethernet this will take many hours.. and you basically have to leave it to work.. do not touch it.. make sure the MBA cannot sleep though.. turn off sleep.. beforehand.

The backup disk image "/Volumes/FW1000HD/MacBkPro.sparsebundle" could not be created (error 1).

I added an 1TB external usb hard disk to my time capsule as the existing 1TB hard disk is nearly full (less than 12 GB left on time capslule hard disk). Initially, I connected external hard disk to my MacBookPro (late 2009 Intel machine) and erased most of the data on that disk. I added the disk to time machine's backup disks thru the time machine window in system preferences. Now I supposedly have both hard disks, the one in the time capsule and the new usb hard disk, available for backup. Time Machine immediately backed up my system, which consists of my MacBookPro hard disk (about 96.8 GB) and another external usb hard disk which contains about 500 GB of data, on the new extenal hard disk.Time Machine did not attempt to create a new sparsebundle at that time on my new external backup disk. This backup was done while the new backup hard disk and the data disk were both connected to the MacBookPro and the Time Capsule was directly connected by ethernet cable to the MacBookPro. I then disconnected the two hard disks from the MacBookPro and reconnected them both via usb to the Time Capsule. Now, hopefully, the external usb backup hard disk can be written to via wi-fi thru the usb connection thru the Time Capsule? I successfully use the data disk (which contains my full iTunes Library) from the Time Capsule all of the time.
Time Machine has continued to backup small backups of a few MB to a few hundred MB to the Time Capsule hard disk. Time Machine has attempted at least twice that I know of to set up a sparsebundle on the new external backup hard disk, but it has failed both times with the following message:
The backup disk image “/Volumes/FW1000HD/MacBkPro.sparsebundle” could not be created (error 1).
Before the two attempts that I witnessed to create the sparsebundle on the new backup drive, I got the following message:
The identity of the backup disk “FW1000HD” has changed since the previous backup.
I did not change the identity of the FW1000HD, but it originally was connected directly to the MacBookPro when it was backed up. Could this be the problem? And if so, how do I fix this, so I can use this hard disk for back up from the wi-fi connection to Time Capsule?
Gary Olson

I'm not sure this is at the root of your problems, but Time Machine manages backups to a local disk differently than to a network disk. The Time Machine backup written to the disk while it was connected locally can't be used for network backups.

Sparsebundle could not be created (error 45)

I just bought my first ever Mac a little over 30 days ago and also purchased a 1TB Seagate FreeAgent GoFlex Home network storage system. I immediately installed the GoFlex software that included a full integration into Time Machine. This worked perfectly until about 4 days ago when all of a sudden it stopped backing up. I'm getting an error that reads: Time Machine could not complete the backup "...sparsebundle could not be created (error 45)".
I can still access the drive outside of the TM program (although not the ATM folder), so the drive itself perfectly installed and connected. I tried rebooting computer and hard drive; that didn't work. I tried re-selecting the drive from within TM; that didn't work either. I'm not really sure what to do...and am pretty pi$$ed at all those "I'm a Mac vs. I'm a PC" commercials right now because this is the same kinda stuff that got me to leave the Windows based systems in the first place. UGH...so WHY is my $4,000 Mac supposed to be any better that an equivelent $2,500 PC?????? Any suggestions on a fix would be greatly appreciated.

+I'm running 10.6.7, last I checked that was later then 10.5.6.+
Try reading a little more carefully. The server has to be a Time Capsule or a Mac running 10.5.6 or later, not the client. Your NAS is neither, so your configuration is unsupported, and predictably, it doesn't work.
+Mac lends their name and brand to the Seagate product, so I must therefore assume your comments are are ill-informed.+
Apple has nothing to do with the Seagate product. Seagate, not Apple, claims that it's compatible with Time Machine, and Seagate, not Apple, is responsible for that claim. If you think the claim is misleading, you have a point, and if you can't get satisfaction from Seagate I suggest you consult a lawyer.
For the benefit of anyone finding this topic, the Seagate NAS is *not safe to use with Time Machine*.

Resource mismatch error in Acrobat Pro 6.0

Since I installed the newest version of Acrobat Reader, my Acrobat (version 9) my Acrobat Pro 6.0 no longer works!! Upon launch I get a "Resource Mismatch" error. There is no other explanation or information as to why the program won't run.

<< IMPORTANT INFORMATION! >>
This is an automated message.
The message you sent (attached below) requires confirmation
before it can be delivered. To confirm that you sent the
message below, just hit the "R"eply button and send this
message back (you don't need to edit anything). Once this is
done, no more confirmations will be necessary.
<< INFORMACION IMPORTANTE >>
Este es un mensaje automatico.
El mensaje que usted ha enviado (mostrado mas abajo)
necesita su confirmacion antes de ser entregado. Para
confirmar que usted ha enviado el mensaje, solo presione
el boton de "R"eply y envie éste mensaje (no es necesario
editar el mensaje). Una vez realizado esto, no se
necesitarán mas confirmaciones.
<< INFORMAÇÃO IMPORTANTE >>
Esta é uma mensagem automática
A mensagem que você enviou (em anexo) requer confirmação
antes de ser entregue. Para confirmar o envio basta
pressionar o botão de "Reply" e enviar esta mensagem de
volta (não é necessário editar). Uma vez que isto seja
feito, novas confirmações não serão necessárias.
<< WICHTIGE INFORMATION >>
Dies ist eine automatisch generierte Antwort.
Ihre Mail (unten angehaengt) muss vor der Zustellung an mich
explizit bestaetigt werden. Um dies zu tun, beantworten Sie
einfach diese Mail mit der "Antworten" oder "Reply"-Funktion
Ihres Mailprogramms. Es sind keine Aenderungen am Text
noetig. Dies ist die einzige Bestaetigung die Sie je an mich
senden muessen; Ihre weiteren Nachrichten werden automatisch
akzeptiert. Diese Massnahme dient der Bekaempfung von Spam.
<< INFORMATION IMPORTANTE >>
Ceci est un message automatique.
Le message que vous avez envoye (dessous) demande
confirmation avant qu'il puisse etre envoye Pour confirmer
que vous avez bien envoye le message ci-dessous, simplement
appuyez sur la touche "R"eply, et renvoyez ce message (Vous
n'avez pas besoin d'editer quoique ce soit). Une fois que
ceci est fait, vous n'avez pas besoin d'autre confirmations.
<< INFORMAZIONE IMPORTATE! >>
Questo è un messaggio automatico.
Il messaggio che hai spedito (allegato sotto) richiede una
conferma prima che sia consegnato. Per confermare che sei
tu che hai spedito il messaggio, basta cliccare il tasto
"R"eply e rispedirlo nuovamente (non hai bisogno di scrivere
nessuna altra informazione aggiuntiva). Fatto questo,
nessuna altra conferma è richiesta.
--- Original Message Follows ---
Date: Fri, 18 Mar 2011 18:35:45 -0600
From: MichaelKazlow <[email protected]>
To: anders ekstromer <[email protected]>
Subject: Resource mismatch error in Acrobat Pro 6.0

Crawler create error

crawler create error
help me~~
======================================================
2315     portal.doostg01.Administrator     8-1-2007     15:22:06.539     Debug     OpenKernel.OpenHttp.Network     .NET #293
com.plumtree.openkernel.impl.openhttp.core.network.PTSocketSelector     Check read count 0.
2316     portal.doostg01.Administrator     8-1-2007     15:22:06.539     Debug     OpenKernel.OpenHttp.Core     .NET #7749
com.plumtree.openkernel.impl.openhttp.core.PTRequestWaiter     WaitForRequests() - [http://doostg01.corp.doosan.com:8080/DSDBCWS/services/SciProviderSoapBinding] - [-1] ms
2317     portal.doostg01.Administrator     8-1-2007     15:22:06.539     Warning     WebService     .NET #7749
com.plumtree.server.impl.webservice.PTWebService     SOAP call failed, an internal error occured on the remote server.
Attempting to parse the SOAP fault for detailed error info. Web Service='???? Infospace Bulletins ?? CWS',
SOAP Action='urn:plumtree-com:XUIService.GetPageContent', URL='http://doostg01.corp.doosan.com:8080/DSDBCWS/services/SciProviderSoapBinding'
2318     portal.doostg01.Administrator     8-1-2007     15:22:06.539     Debug     OpenKernel.OpenHttp.Network     .NET #293
com.plumtree.openkernel.impl.openhttp.core.network.PTSocketSelector     Check connect count 0.
2319     portal.doostg01.Administrator     8-1-2007     15:22:06.539     Debug     OpenKernel.OpenHttp.Network     .NET #293
com.plumtree.openkernel.impl.openhttp.core.network.PTSocketSelector     Check write count 0.
2320     portal.doostg01.Administrator     8-1-2007     15:22:06.539     Warning     WebService     .NET #7749
com.plumtree.server.impl.soap.SOAPEnvelope     Error in function SOAPEnvelope.Restore (arrayText == System.Byte[]):
SOAP fault: faultcode='soapenv:Server.userException' faultstring='java.rmi.RemoteException'
com.plumtree.server.impl.soap.OpenSoapException: SOAP fault: faultcode='soapenv:Server.userException' faultstring='java.rmi.RemoteException'
com.plumtree.server.impl.soap.OpenSoapException: SOAP fault: faultcode='soapenv:Server.userException' faultstring='java.rmi.RemoteException'
at com.plumtree.server.impl.soap.SOAPParser.LoadInternal() in
e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\soap\SOAPParser.cs:line 628
at com.plumtree.server.impl.soap.SOAPParser.LoadBinary(Byte[] pXML) in
e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\soap\SOAPParser.cs:line 546
at com.plumtree.server.impl.soap.SOAPEnvelope.Restore(Byte[] arrayText) in
e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\soap\SOAPEnvelope.cs:line 58
at com.plumtree.server.impl.webservice.PTWebService.Invoke(ISOAPEnvelope pEnv, String sURL, String sAction, IOKHttpSession pHttpSession, Int32 nTimeoutInMS) in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\webservice\PTWebService.cs:line 1137
at com.plumtree.server.impl.webservice.XUIService.GetContent(Int32 nPageNumber, IXPPropertyBag pPBagSettings, Object vsaXSLParameters) in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\webservice\XUIService.cs:line 359
at com.plumtree.portalpages.admin.editors.xui.XUIHelperModel.GetHTMLForXUIPage(Int32 _nXUIPageID) in e:\buildroot\Release\portalui\6.0.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\admin\editors\xui\XUIHelperModel.cs:line 162
at com.plumtree.portalpages.admin.editors.xui.XUIView.Display(Int32 _nXUIPageID) in e:\buildroot\Release\portalui\6.0.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\admin\editors\xui\XUIView.cs:line 96
at com.plumtree.portalpages.ext.providers.soap.crawler.MainDP.PageDisplay() in e:\buildroot\Release\portalui\6.0.x\ptwebui\provUISOAP\dotnet\prod\src\com\plumtree\portalpages\ext\providers\soap\crawler\MainDP.cs:line 58
at com.plumtree.uiinfrastructure.form.AFormDP.DisplayForm() in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\form\AFormDP.cs:line 717
at com.plumtree.uiinfrastructure.form.AFormDP.Display(IWebData pageData) in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\form\AFormDP.cs:line 487
at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleDisplayPage(Redirect myRedirect, RequestData tempData) in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\Interpreter.cs:line 1700
at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleRequest(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\Interpreter.cs:line 515
at com.plumtree.uiinfrastructure.interpreter.Interpreter.DoService(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\Interpreter.cs:line 167
at com.plumtree.uiinfrastructure.web.XPPage.Service(HttpRequest httpRequest, HttpResponse httpResponse, HttpSessionState httpSession, HttpApplicationState httpApplication) in e:\buildroot\Release\httpmemorymanagement\2.0.x\dotNET\src\com\plumtree\uiinfrastructure\web\XPPage.cs:line 82
at com.plumtree.portaluiinfrastructure.activityspace.PlumHandler.ProcessRequest(HttpContext context) in e:\buildroot\Release\portalui\6.0.x\ptwebui\portal\dotnet\prod\src\web\PlumHandler.cs:line 37
at System.Web.CallHandlerExecutionStep.System.Web.HttpApplication+IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
at System.Web.HttpApplication.ResumeSteps(Exception error)
at System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData)
at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
at System.Web.HttpRuntime.ProcessRequest(HttpWorkerRequest wr)
at System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType)
2321     portal.doostg01.Administrator     8-1-2007     15:22:06.539
Warning     XUI     .NET #7749     com.plumtree.server.impl.webservice.XUIServiceManager
Error in function XUIService.GetContent (nPageNumber == 1, pPBagSettings ==
<?xml version="1.0" encoding="ucs-2"?><PTBAG V="1.1" xml:space="preserve" />,
vsaXSLParameters == [ ['gp_sRelativeImageServerBaseURL'],
['http://doostg01.corp.doosan.com/imageserver/'] ]):
Error in function SOAPEnvelope.Restore (arrayText == System.Byte[]):
SOAP fault: faultcode='soapenv:Server.userException' faultstring='java.rmi.RemoteException'
com.plumtree.server.impl.soap.OpenSoapException:
Error in function SOAPEnvelope.Restore (arrayText == System.Byte[]): SOAP fault: faultcode='soapenv:Server.userException' faultstring='java.rmi.RemoteException'
com.plumtree.server.impl.soap.OpenSoapException:
Error in function SOAPEnvelope.Restore (arrayText == System.Byte[]): SOAP fault: faultcode='soapenv:Server.userException' faultstring='java.rmi.RemoteException'
at com.plumtree.openfoundation.util.XPException.GetInstance(String strErrorMsg, Exception e)
at com.plumtree.server.impl.soap.SOAPEnvelope.Restore(Byte[] arrayText) in
e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\soap\SOAPEnvelope.cs:line 66
at com.plumtree.server.impl.webservice.PTWebService.Invoke(ISOAPEnvelope pEnv, String sURL, String sAction,
IOKHttpSession pHttpSession, Int32 nTimeoutInMS) in
e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\webservice\PTWebService.cs:line 1137
at com.plumtree.server.impl.webservice.XUIService.GetContent(Int32 nPageNumber, IXPPropertyBag pPBagSettings, Object vsaXSLParameters) in
e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\webservice\XUIService.cs:line 359
at com.plumtree.portalpages.admin.editors.xui.XUIHelperModel.GetHTMLForXUIPage(Int32 _nXUIPageID) in e:\buildroot\Release\portalui\6.0.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\admin\editors\xui\XUIHelperModel.cs:line 162
at com.plumtree.portalpages.admin.editors.xui.XUIView.Display(Int32 _nXUIPageID) in e:\buildroot\Release\portalui\6.0.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\admin\editors\xui\XUIView.cs:line 96
at com.plumtree.portalpages.ext.providers.soap.crawler.MainDP.PageDisplay() in e:\buildroot\Release\portalui\6.0.x\ptwebui\provUISOAP\dotnet\prod\src\com\plumtree\portalpages\ext\providers\soap\crawler\MainDP.cs:line 58
at com.plumtree.uiinfrastructure.form.AFormDP.DisplayForm() in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\form\AFormDP.cs:line 717
at com.plumtree.uiinfrastructure.form.AFormDP.Display(IWebData pageData) in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\form\AFormDP.cs:line 487
at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleDisplayPage(Redirect myRedirect, RequestData tempData) in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\Interpreter.cs:line 1700
at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleRequest(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\Interpreter.cs:line 515
at com.plumtree.uiinfrastructure.interpreter.Interpreter.DoService(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\Interpreter.cs:line 167
at com.plumtree.uiinfrastructure.web.XPPage.Service(HttpRequest httpRequest, HttpResponse httpResponse, HttpSessionState httpSession, HttpApplicationState httpApplication) in e:\buildroot\Release\httpmemorymanagement\2.0.x\dotNET\src\com\plumtree\uiinfrastructure\web\XPPage.cs:line 82
at com.plumtree.portaluiinfrastructure.activityspace.PlumHandler.ProcessRequest(HttpContext context) in e:\buildroot\Release\portalui\6.0.x\ptwebui\portal\dotnet\prod\src\web\PlumHandler.cs:line 37
at System.Web.CallHandlerExecutionStep.System.Web.HttpApplication+IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
at System.Web.HttpApplication.ResumeSteps(Exception error)
at System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData)
at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
at System.Web.HttpRuntime.ProcessRequest(HttpWorkerRequest wr)
at System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType)
Caused by: com.plumtree.server.impl.soap.OpenSoapException:
SOAP fault: faultcode='soapenv:Server.userException' faultstring='java.rmi.RemoteException'
at com.plumtree.server.impl.soap.SOAPParser.LoadInternal() in
e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\soap\SOAPParser.cs:line 628
at com.plumtree.server.impl.soap.SOAPParser.LoadBinary(Byte[] pXML) in
e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\soap\SOAPParser.cs:line 546
at com.plumtree.server.impl.soap.SOAPEnvelope.Restore(Byte[] arrayText) in
e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\soap\SOAPEnvelope.cs:line 58
... 19 more
2322     portal.doostg01.Administrator     8-1-2007     15:22:06.539
Error     Portal_Admin     .NET #7749
com.plumtree.portalpages.admin.editors.xui.XUIView
XUIView::Display The following error occured when trying to display the HTML: Error in function XUIService.GetContent (nPageNumber == 1, pPBagSettings == <?xml version="1.0" encoding="ucs-2"?><PTBAG V="1.1" xml:space="preserve" />, vsaXSLParameters == [ ['gp_sRelativeImageServerBaseURL'], ['http://doostg01.corp.doosan.com/imageserver/'] ]): Error in function SOAPEnvelope.Restore (arrayText == System.Byte[]): SOAP fault: faultcode='soapenv:Server.userException' faultstring='java.rmi.RemoteException'
com.plumtree.server.impl.soap.OpenSoapException:
Error in function XUIService.GetContent (nPageNumber == 1, pPBagSettings ==
<?xml version="1.0" encoding="ucs-2"?><PTBAG V="1.1" xml:space="preserve" />,
vsaXSLParameters == [ ['gp_sRelativeImageServerBaseURL'], ['http://doostg01.corp.doosan.com/imageserver/'] ]):
Error in function SOAPEnvelope.Restore (arrayText == System.Byte[]): SOAP fault:
faultcode='soapenv:Server.userException' faultstring='java.rmi.RemoteException'
com.plumtree.server.impl.soap.OpenSoapException: Error in function XUIService.GetContent
(nPageNumber == 1, pPBagSettings ==
<?xml version="1.0" encoding="ucs-2"?>
<PTBAG V="1.1" xml:space="preserve" />, vsaXSLParameters == [ ['gp_sRelativeImageServerBaseURL'],
['http://doostg01.corp.doosan.com/imageserver/'] ]):
Error in function SOAPEnvelope.Restore (arrayText == System.Byte[]):
SOAP fault: faultcode='soapenv:Server.userException' faultstring='java.rmi.RemoteException'
at com.plumtree.openfoundation.util.XPException.GetInstance(String strErrorMsg, Exception e)
at com.plumtree.server.impl.webservice.XUIService.GetContent(Int32 nPageNumber, IXPPropertyBag pPBagSettings, Object vsaXSLParameters) in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\webservice\XUIService.cs:line 382
at com.plumtree.portalpages.admin.editors.xui.XUIHelperModel.GetHTMLForXUIPage(Int32 _nXUIPageID) in e:\buildroot\Release\portalui\6.0.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\admin\editors\xui\XUIHelperModel.cs:line 162
at com.plumtree.portalpages.admin.editors.xui.XUIView.Display(Int32 _nXUIPageID) in e:\buildroot\Release\portalui\6.0.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\admin\editors\xui\XUIView.cs:line 96
at com.plumtree.portalpages.ext.providers.soap.crawler.MainDP.PageDisplay() in e:\buildroot\Release\portalui\6.0.x\ptwebui\provUISOAP\dotnet\prod\src\com\plumtree\portalpages\ext\providers\soap\crawler\MainDP.cs:line 58
at com.plumtree.uiinfrastructure.form.AFormDP.DisplayForm() in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\form\AFormDP.cs:line 717
at com.plumtree.uiinfrastructure.form.AFormDP.Display(IWebData pageData) in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\form\AFormDP.cs:line 487
at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleDisplayPage(Redirect myRedirect, RequestData tempData) in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\Interpreter.cs:line 1700
at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleRequest(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\Interpreter.cs:line 515
at com.plumtree.uiinfrastructure.interpreter.Interpreter.DoService(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\Interpreter.cs:line 167
at com.plumtree.uiinfrastructure.web.XPPage.Service(HttpRequest httpRequest, HttpResponse httpResponse, HttpSessionState httpSession, HttpApplicationState httpApplication) in e:\buildroot\Release\httpmemorymanagement\2.0.x\dotNET\src\com\plumtree\uiinfrastructure\web\XPPage.cs:line 82
at com.plumtree.portaluiinfrastructure.activityspace.PlumHandler.ProcessRequest(HttpContext context) in e:\buildroot\Release\portalui\6.0.x\ptwebui\portal\dotnet\prod\src\web\PlumHandler.cs:line 37
at System.Web.CallHandlerExecutionStep.System.Web.HttpApplication+IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
at System.Web.HttpApplication.ResumeSteps(Exception error)
at System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData)
at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
at System.Web.HttpRuntime.ProcessRequest(HttpWorkerRequest wr)
at System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType)
Caused by: com.plumtree.server.impl.soap.OpenSoapException:
Error in function SOAPEnvelope.Restore (arrayText == System.Byte[]):
SOAP fault: faultcode='soapenv:Server.userException' faultstring='java.rmi.RemoteException'
at com.plumtree.openfoundation.util.XPException.GetInstance(String strErrorMsg, Exception e)
at com.plumtree.server.impl.soap.SOAPEnvelope.Restore(Byte[] arrayText) in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\soap\SOAPEnvelope.cs:line 66
at com.plumtree.server.impl.webservice.PTWebService.Invoke(ISOAPEnvelope pEnv, String sURL, String sAction, IOKHttpSession pHttpSession, Int32 nTimeoutInMS) in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\webservice\PTWebService.cs:line 1137
at com.plumtree.server.impl.webservice.XUIService.GetContent(Int32 nPageNumber, IXPPropertyBag pPBagSettings, Object vsaXSLParameters) in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\webservice\XUIService.cs:line 359
... 17 more
Caused by: com.plumtree.server.impl.soap.OpenSoapException:
SOAP fault: faultcode='soapenv:Server.userException' faultstring='java.rmi.RemoteException'
at com.plumtree.server.impl.soap.SOAPParser.LoadInternal() in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\soap\SOAPParser.cs:line 628
at com.plumtree.server.impl.soap.SOAPParser.LoadBinary(Byte[] pXML) in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\soap\SOAPParser.cs:line 546
at com.plumtree.server.impl.soap.SOAPEnvelope.Restore(Byte[] arrayText) in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\soap\SOAPEnvelope.cs:line 58
... 19 more
2323     portal.doostg01.Administrator     8-1-2007     15:22:06.539     Debug     UI_Infrastructure
.NET #7749     com.plumtree.uiinfrastructure.statichelpers.PersonalSettingsHelper     Entering GetPersonalSettingValue() - sSettingsName: strLanguage
2324     portal.doostg01.Administrator     8-1-2007     15:22:06.539     Debug     UI_Infrastructure
.NET #7749     com.plumtree.uiinfrastructure.statichelpers.PersonalSettingsHelper     GetPersonalSettingValue() - oVal: ko
2325     portal.doostg01.Administrator     8-1-2007     15:22:06.554     Error     UI_Infrastructure
.NET #7749     com.plumtree.uiinfrastructure.form.AFormDP     Display: The following error occured when trying to display the HTML:
com.plumtree.openfoundation.util.XPException: HTML? ??? ? ????.
com.plumtree.openfoundation.util.XPException: HTML? ??? ? ????.
at com.plumtree.portalpages.admin.editors.xui.XUIView.Display(Int32 _nXUIPageID) in
e:\buildroot\Release\portalui\6.0.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\admin\editors\xui\XUIView.cs:line 106
at com.plumtree.portalpages.ext.providers.soap.crawler.MainDP.PageDisplay() in e:\buildroot\Release\portalui\6.0.x\ptwebui\provUISOAP\dotnet\prod\src\com\plumtree\portalpages\ext\providers\soap\crawler\MainDP.cs:line 58
at com.plumtree.uiinfrastructure.form.AFormDP.DisplayForm() in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\form\AFormDP.cs:line 717
at com.plumtree.uiinfrastructure.form.AFormDP.Display(IWebData pageData) in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\form\AFormDP.cs:line 487
at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleDisplayPage(Redirect myRedirect, RequestData tempData) in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\Interpreter.cs:line 1700
at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleRequest(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\Interpreter.cs:line 515
at com.plumtree.uiinfrastructure.interpreter.Interpreter.DoService(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) in e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\Interpreter.cs:line 167
at com.plumtree.uiinfrastructure.web.XPPage.Service(HttpRequest httpRequest, HttpResponse httpResponse, HttpSessionState httpSession, HttpApplicationState httpApplication) in e:\buildroot\Release\httpmemorymanagement\2.0.x\dotNET\src\com\plumtree\uiinfrastructure\web\XPPage.cs:line 82
at com.plumtree.portaluiinfrastructure.activityspace.PlumHandler.ProcessRequest(HttpContext context) in e:\buildroot\Release\portalui\6.0.x\ptwebui\portal\dotnet\prod\src\web\PlumHandler.cs:line 37
at System.Web.CallHandlerExecutionStep.System.Web.HttpApplication+IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
at System.Web.HttpApplication.ResumeSteps(Exception error)
at System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData)
at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
at System.Web.HttpRuntime.ProcessRequest(HttpWorkerRequest wr)
at System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType)
Caused by: com.plumtree.server.impl.soap.OpenSoapException:
Error in function XUIService.GetContent (nPageNumber == 1, pPBagSettings ==
<?xml version="1.0" encoding="ucs-2"?><PTBAG V="1.1" xml:space="preserve" />,
vsaXSLParameters == [ ['gp_sRelativeImageServerBaseURL'], ['http://doostg01.corp.doosan.com/imageserver/'] ]):
Error in function SOAPEnvelope.Restore (arrayText == System.Byte[]): SOAP fault:
faultcode='soapenv:Server.userException' faultstring='java.rmi.RemoteException'
at com.plumtree.openfoundation.util.XPException.GetInstance(String strErrorMsg, Exception e)
at com.plumtree.server.impl.webservice.XUIService.GetContent(Int32 nPageNumber, IXPPropertyBag pPBagSettings,
Object vsaXSLParameters) in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\webservice\XUIService.cs:line 382
at com.plumtree.portalpages.admin.editors.xui.XUIHelperModel.GetHTMLForXUIPage(Int32 _nXUIPageID)
in e:\buildroot\Release\portalui\6.0.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\admin\editors\xui\XUIHelperModel.cs:line 162
at com.plumtree.portalpages.admin.editors.xui.XUIView.Display(Int32 _nXUIPageID)
in e:\buildroot\Release\portalui\6.0.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\admin\editors\xui\XUIView.cs:line 96
... 15 more
Caused by: com.plumtree.server.impl.soap.OpenSoapException:
Error in function SOAPEnvelope.Restore (arrayText == System.Byte[]):
SOAP fault: faultcode='soapenv:Server.userException' faultstring='java.rmi.RemoteException'
at com.plumtree.openfoundation.util.XPException.GetInstance(String strErrorMsg, Exception e)
at com.plumtree.server.impl.soap.SOAPEnvelope.Restore(Byte[] arrayText) in
e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\soap\SOAPEnvelope.cs:line 66
at com.plumtree.server.impl.webservice.PTWebService.Invoke(ISOAPEnvelope pEnv, String sURL, String sAction,
IOKHttpSession pHttpSession, Int32 nTimeoutInMS) in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\webservice\PTWebService.cs:line 1137
at com.plumtree.server.impl.webservice.XUIService.GetContent(Int32 nPageNumber,
IXPPropertyBag pPBagSettings, Object vsaXSLParameters) in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\webservice\XUIService.cs:line 359
... 17 more
Caused by: com.plumtree.server.impl.soap.OpenSoapException: SOAP fault:
faultcode='soapenv:Server.userException' faultstring='java.rmi.RemoteException'
at com.plumtree.server.impl.soap.SOAPParser.LoadInternal() in
e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\soap\SOAPParser.cs:line 628
at com.plumtree.server.impl.soap.SOAPParser.LoadBinary(Byte[] pXML) in
e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\soap\SOAPParser.cs:line 546
at com.plumtree.server.impl.soap.SOAPEnvelope.Restore(Byte[] arrayText) in
e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\soap\SOAPEnvelope.cs:line 58
... 19 more
2326     portal.doostg01.Administrator     8-1-2007     15:22:06.554
Error     UI_Infrastructure     .NET #7749     com.plumtree.uiinfrastructure.interpreter.Interpreter     Unable to process request.
com.plumtree.openfoundation.util.XPException: HTML? ??? ? ????.
com.plumtree.openfoundation.util.XPException: HTML? ??? ? ????.
at com.plumtree.portalpages.admin.editors.xui.XUIView.Display(Int32 _nXUIPageID) in
e:\buildroot\Release\portalui\6.0.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\admin\editors\xui\XUIView.cs:line 106
at com.plumtree.portalpages.ext.providers.soap.crawler.MainDP.PageDisplay() in
e:\buildroot\Release\portalui\6.0.x\ptwebui\provUISOAP\dotnet\prod\src\com\plumtree\portalpages\ext\providers\soap\crawler\MainDP.cs:line 58
at com.plumtree.uiinfrastructure.form.AFormDP.DisplayForm() in
e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\form\AFormDP.cs:line 717
at com.plumtree.uiinfrastructure.form.AFormDP.Display(IWebData pageData) in
e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\form\AFormDP.cs:line 487
at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleDisplayPage(Redirect myRedirect, RequestData tempData) in
e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\Interpreter.cs:line 1700
at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleRequest
(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) in
e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\Interpreter.cs:line 515
at com.plumtree.uiinfrastructure.interpreter.Interpreter.DoService
(IXPRequest request, IXPResponse response, ISessionManager session, IApplication application) in
e:\buildroot\Release\uiinfrastructure\6.0.x\dotnet\prod\src\com\plumtree\uiinfrastructure\interpreter\Interpreter.cs:line 167
at com.plumtree.uiinfrastructure.web.XPPage.Service(HttpRequest httpRequest, HttpResponse httpResponse,
HttpSessionState httpSession, HttpApplicationState httpApplication) in
e:\buildroot\Release\httpmemorymanagement\2.0.x\dotNET\src\com\plumtree\uiinfrastructure\web\XPPage.cs:line 82
at com.plumtree.portaluiinfrastructure.activityspace.PlumHandler.ProcessRequest(HttpContext context) in
e:\buildroot\Release\portalui\6.0.x\ptwebui\portal\dotnet\prod\src\web\PlumHandler.cs:line 37
at System.Web.CallHandlerExecutionStep.System.Web.HttpApplication+IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
at System.Web.HttpApplication.ResumeSteps(Exception error)
at System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData)
at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
at System.Web.HttpRuntime.ProcessRequest(HttpWorkerRequest wr)
at System.Web.Hosting.ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType)
Caused by: com.plumtree.server.impl.soap.OpenSoapException:
Error in function XUIService.GetContent (nPageNumber == 1, pPBagSettings ==
<?xml version="1.0" encoding="ucs-2"?><PTBAG V="1.1" xml:space="preserve" />,
vsaXSLParameters == [ ['gp_sRelativeImageServerBaseURL'], ['http://doostg01.corp.doosan.com/imageserver/'] ]):
Error in function SOAPEnvelope.Restore (arrayText == System.Byte[]): SOAP fault: faultcode='soapenv:Server.userException' faultstring='java.rmi.RemoteException'
at com.plumtree.openfoundation.util.XPException.GetInstance(String strErrorMsg, Exception e)
at com.plumtree.server.impl.webservice.XUIService.GetContent(Int32 nPageNumber, IXPPropertyBag pPBagSettings, Object vsaXSLParameters) in e:\buildroot\Release\portalserver\6.0.x\portalobjects\build\x86\src\dotnet\com\plumtree\server\impl\webservice\XUIService.cs:line 382
at com.plumtree.portalpages.admin.editors.xui.XUIHelperModel.GetHTMLForXUIPage(Int32 _nXUIPageID) in e:\buildroot\Release\portalui\6.0.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\admin\editors\xui\XUIHelperModel.cs:line 162
at com.plumtree.portalpages.admin.editors.xui.XUIView.Display(Int32 _nXUIPageID) in e:\buildroot\Release\portalui\6.0.x\ptwebui\portalpages\dotnet\prod\src\com\plumtree\portalpages\admin\editors\xui\XUIView.cs:line 96
..

Just a wild guess: this is SR1 aka SP9 of KMC without any patches. If that's the case then please install SP9 patch3.

How to create error handeller page in Jdeveloper 11 (Version 11.1.1.1.0)

Hi,
I have created error.jsp page also added in web. XML but it is not catching exception
error.jsp
<body>
<h2>Your application has generated an error</h2>
<h3>Please check for the error given below</h3>
<b>Exception:</b><br>
<font color="red"><%= exception.toString() %></font>
</body>
Web.xml
<error-page>
<error-code>500</error-code>
<location>/Error.jsp</location>
</error-page>
<error-page>
<exception-type>java.lang.Throwable</exception-type>
<location>/Error.jsp</location>
</error-page>
after login page i am getting these exception
java.lang.NullPointerException
     at view.security.UserAccess.get(UserAccess.java:30)
     at javax.el.MapELResolver.getValue(MapELResolver.java:164)
     at javax.el.CompositeELResolver.getValue(CompositeELResolver.java:143)
     at com.sun.faces.el.FacesCompositeELResolver.getValue(FacesCompositeELResolver.java:72)
     at com.sun.el.parser.AstValue.getValue(AstValue.java:118)
     Truncated. see log file for complete stacktrace
>
but it is not redirecting to error page
also i am using adf.config.xml (task flow )for mapping pages so how to resolve these issue
can anybody help me
is there any another way to create error page
Thanx in advance..!!!
Amol

Hi Frank ,
Thanx for replying
Where i have to define error is there any sample application that may helpful for me
Also, I have created sample JSF page in thse
ErrorDiaplay.jspx
<?xml version='1.0' encoding='windows-1252'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=windows-1252"
isErrorPage="true"/>
<f:view>
<af:document id="d1">
<af:form id="f1">
<af:panelFormLayout id="pfl1">
<f:facet name="footer"/>
<jsp:scriptlet>
out.println(exception);
</jsp:scriptlet>
</af:panelFormLayout>
</af:form>
</af:document>
</f:view>
</jsp:root>
Let me know where i have to define...
Regards,
Amol

Failed to load an application resource (internal error) - error message when previewing pdf in program

Hi,
I keep getting this error message when trying to Preview PDF in program "Failed to load an application resource (internal error)". I haven't changed anything in LiveCycle, so not sure why this is happening. Have had this issue for the past few months. I've been working around it, but it's kind of a pain. Would prefer to view forms in program. Suggestions to fix this?
Thank you!
Stacy

I fixed mine! In Reader 9 and 10.0 I had disabled the ReadOutLoud feature as it kept popping up whenever it felt like it, and I don't need ReadOutLoud. What worked for me was first to purge the system of Reader 9 - the uninstall routine leaves stuff behind. Then I went into the Reader 10 program folder, located the plug_ins sub folder, and renamed it to oldplug_ins. Then I ran the repair routine which recreated the plug_ins subfoler.. All now works, except that the <expletive deleted> ReadOutLoud is up to its old tricks again, but I can live with that for now.
Hope this helps.

Modified "Create error table" from CKM SQL problem

Hi guys!
I have a strange problem while creating error table by the CKM. I've changed in the interface from flow control to static control and now the command to create error table looks like:
create table STG_TMP.E$_I_D_ASSORTMENT_S
ERR_TYPE VARCHAR2(1 CHAR) NULL,
ERR_MESS VARCHAR2(250 CHAR) NULL,
CHECK_DATE DATE NULL,
ORIGIN VARCHAR2(100 CHAR) NULL,
CONS_NAME VARCHAR2(35 CHAR) NULL,
CONS_TYPE VARCHAR2(2 CHAR) NULL
the create error table(it should create table with all the columns varchar2 and handle the situation when column is number(0,0) => varchar2(255)) step from CKM is:
<%=snpRef.getColList("<?\t", "int vL[POS]=[LONGC]+[SCALE]; if(\u0022[DEST_DT]\u0022.equals(\u0022DATE\u0022)) {vL[POS]=20;}; if(\u0022[DEST_DT]\u0022.equals(\u0022NUMBER\u0022) && vL[POS]==0) {vL[POS]=255;};", "\n \t", "\n?>", "INS")%>
create table <%=snpRef.getTable("L","ERR_NAME", "W")%>
ERR_TYPE <%=snpRef.getDataType("DEST_VARCHAR", "1", "")%> <%=snpRef.getInfo("DEST_DDL_NULL")%>,
ERR_MESS <%=snpRef.getDataType("DEST_VARCHAR", "250", "")%> <%=snpRef.getInfo("DEST_DDL_NULL")%>,
CHECK_DATE <%=snpRef.getDataType("DEST_DATE", "", "")%> <%=snpRef.getInfo("DEST_DDL_NULL")%>,
<%=snpRef.getColList("", "[COL_NAME]\t varchar2 (<?=vL[POS]?>) " + snpRef.getInfo("DEST_DDL_NULL"), ",\n\t", "", "INS")%>,
ORIGIN <%=snpRef.getDataType("DEST_VARCHAR", "100", "")%> <%=snpRef.getInfo("DEST_DDL_NULL")%>,
CONS_NAME <%=snpRef.getDataType("DEST_VARCHAR", "35", "")%> <%=snpRef.getInfo("DEST_DDL_NULL")%>,
CONS_TYPE <%=snpRef.getDataType("DEST_VARCHAR", "2", "")%> <%=snpRef.getInfo("DEST_DDL_NULL")%>
Do you know whats the problem??
Thanks in advance :)
With regards,
PsmakR

What version of ODI are you using ?
Are you still using Sunopsis ?
Try using ODI 10.1.3.5
Also, follow the solution in post
Issue with Create Target Table in CKM Oracle

Resource create error

Similar Messages

Maybe you are looking for