Resource Creation Problem

Hello,
I'm attempting to setup Comm Suite 5 (Calendar server 6.3, Directory Server 6.0) and I'm running into problems setting up resources.
The first issue is in Delegated Administrator when I create resources it dose not create the calendar. I've found documentation that says it doesn't create the calendar for the resource till it has been invited to a meeting. I've tried this and still no calendar.
Since I couldn't get Delegated Administrator to work correctly I decided to use csresource
./csresource -m [email protected] -o owner -c new_res2 create new_res2
I get the following error when I run the above command:
Calendar [email protected] has been created
LDAP error 50: Insufficient access
Error creating cn=new_res2,ou=people, o=org,o=isp
Calendar [email protected] has been deleted
If I could get either one of these working it would be great but If I could get both working it would be even better.
Thanks
Josh

Hi,
Coolhands_99 wrote:
The first issue is in Delegated Administrator when I create resources it dose not create the calendar. I've found documentation that says it doesn't create the calendar for the resource till it has been invited to a meeting. Actually it doesn't create the calendar database entry. The required LDAP information should have been provisioned.
I've tried this and still no calendar. Are you able to invite/see the resource and the email address for the resource?
Since I couldn't get Delegated Administrator to work correctly I decided to use csresource
./csresource -m [email protected] -o owner -c new_res2 create new_res2
I get the following error when I run the above command:
Calendar [email protected] has been created
LDAP error 50: Insufficient access
Error creating cn=new_res2,ou=people, o=org,o=isp
Calendar [email protected] has been deleted
Check the LDAP access/error logs at the time that you created the entry to see what user the calendar server was trying to bind as when it failed (thus returning the err=50).
Check the local.authldapbindcred, local.authldapbinddn, local.enduseradmindn settings. Does the user listed here exist in the directory server?
If I could get either one of these working it would be great but If I could get both working it would be even better.It may be that the same issue is stopping both methods from working.
Regards,
Shane.

Similar Messages

SUNW.gds resource creation problem / service startup failure

We have a vendor provided set of application server start and stop scripts that we are trying to mold into a GDS resource. The scripts must be run as a user not as root. This app takes about 6 minutes to start up and it creates about 400 processes in doing so. We gave the user cluster.modify auth so it can create the resource, and the command takes but when the resource is being created, the startup script does not seem to fire. So I'm a little stumped as to make this thing run under the user account project settings. The other thing I noticed is the ports that I specify in the list are never present until the end of the 6 minutes of startup junk, and the GDS seems to log problems about these ports at the onset of creation. Here is the command for the create:
clrs create -g ss_wfm-rg -t SUNW.gds \
-p Start_Command="/home/appl/advxrt/R8.0g/TOP/SOLARIS/bin/StartServer" \
-p Stop_Command="/home/appl/advxrt/R8.0g/TOP/SOLARIS/bin/ShutdownServer" \
-p Resource_dependencies=advxprd,ss_hasp-rs \
-p Port_list=22100/tcp,23100/tcp,27100/tcp,4100/tcp,17100/tcp \
-p Start_timeout=420 \
-p Stop_timeout=120 \
-p Child_mon_level=-1 \
ss_server_gds-rsAnd from the messages log...
Aug 18 07:31:04 prddsm01nd01 SC[SUNW.gds:6,ss_wfm-rg,ss_server_gds-rs,gds_svc_start]: [ID 141062 daemon.error] Failed to connect to host advxprd and port 221
00: Connection refused.
Aug 18 07:31:04 prddsm01nd01 SC[SUNW.gds:6,ss_wfm-rg,ss_server_gds-rs,gds_svc_start]: [ID 805735 daemon.error] Failed to connect to the host <advxprd> and po
rt <22100>.
Aug 18 07:31:06 prddsm01nd01 Cluster.PMF.pmfd: [ID 887656 daemon.notice] Process: tag="ss_wfm-rg,ss_server_gds-rs,0.svc", cmd="/bin/sh -c /home/appl/advxrt/R
8.0g/TOP/SOLARIS/bin/StartServer", Failed to stay up.
Aug 18 07:31:06 prddsm01nd01 Cluster.PMF.pmfd: [ID 534408 daemon.notice] "ss_wfm-rg,ss_server_gds-rs,0.svc" restarting too often ... sleeping 30 seconds.
Aug 18 07:31:06 prddsm01nd01 Cluster.RGM.rgmd: [ID 650825 daemon.error] Method <gds_svc_start> on resource <ss_server_gds-rs> terminated due to receipt of si
gnal <9>Basically I would like to know if the ports list should include all ports that the app will eventually listen on, or some, or minimal? The other biggy is how to get this thing to launch as a user and if it fail over to another node does not start as root. I tried doing an su - acctname -c "script" but it won't start it. Thanks!

Detlef or anyone familiar with GDS...
We agree here that customizing the GDS using your template is the way to go. What I have noticed is that since creating the wrapper scripts to call the newtask command, setup the environment, etc, when the wrapper script finishes (kicking off the native script) the RGM sees this as a fault and immeidately tries to restart the agent. Here is a snippet of the messages log.
Sep 24 13:48:03 devdsm01nd01 Cluster.PMF.pmfd: [ID 887656 daemon.notice] Process: tag="ss_stage-rg,ss_stage_server_gds-rs,0.svc", cmd="/bin/sh -c /home/appl/advxtst/tds/SS_kicker.sh", Failed to stay up.
Sep 24 13:48:03 devdsm01nd01 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource ss_stage_server_gds-rs status on node devdsm01nd01 change to R_FM_FAULTED
Sep 24 13:48:03 devdsm01nd01 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource ss_stage_server_gds-rs status msg on node devdsm01nd01 change to <Service daemon not running.>
Sep 24 13:48:03 devdsm01nd01 SC[SUNW.gds:6,ss_stage-rg,ss_stage_server_gds-rs,gds_probe]: [ID 670283 daemon.notice] Issuing a resource restart request because the application exited.So we figured out that if we suspend the RG, then we can of course stop and start the app all day long using the clrs dis|enable commands but is using these wrapper scripts still the way to go even with the GDS template? Even assigning the user's project settings to the resources does not seem to allow the native vendor supplied startup scripts to launch (they say it is purely because we did not setup the working directory, etc, correctly, which the wrapper scripts do quite well). Is is normal for the wrapper script to "die" but yet have GDS probe the ports after X amount of time? Is this where the sleeping dummy comes into play?
thanks in advance!

Database creation problem on Windows XP

Hello Readers
I have installed ORACLE Database Engine on windows XP.
I am facing problem in database creation.
I have tryed wizard as well as mannual method.
in wizard at 90% it gives an error "END-OF-FILE ON COMMUNICATION CHANNEL"
although CD drive is in CR Rom drive.
Please help me ....
Rashid Masood Ashraf
email: [email protected]

After going to the properties as you suggested:
Right now the Obtain an IP address automatically is checked
I need to check the Use the following IP address:
What should I enter for
IP address:
Subnet mask:
Default gateway:
Please help.
Edited by: Nel Marcus on Dec 2, 2008 3:49 PM

Remittance challan creation problem in Cross company code scenario.

I made to Advance payment to Cross comany code while posting time we deduct the TDS amount. at the time remiottance challan creation i got bellow error.please help to me
No unpaid tax lines exist for the given selection criteria.
Message no. 8I702
Diagnosis
The corresponding withholding tax line &1& is not present in WITH_ITEM table.
System Response
For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
Procedure
check entries in table WITH_ITEM for the open tax items chosen for clearing.
Edited by: TEEGALA SATISH on Jun 15, 2010 5:43 PM

Hi ...Actually i am getting same problem in challan creation.. Did you get any solution? ...

Process order creation problem

I am creating a process order . while creating the process order system is throwing error as Auto batch numbering not set up for material type XXXX in plant xxxx . System is not allowing to create process order.
How to resolve the issue.

Check in CORW and switch off batch creation to isolate the problem if needed. Also see whether you have any batch managed compoents for which you have set master data for automatic batch determination.
There is no setting for material types and plant for batch. May be the error message is not correct. What is the message number?

New Excise Invoice Creation - Problem

Hi All,
I am facing problem in creation of Excise Invoice. I dont know the step by step process, can any one help me to get this ?
Best Regards
Chintesh Soni

Hi Chintesh,
if you are referring to a 100% tax invoice, please see note [887917|https://service.sap.com/sap/support/notes/887917] for 2 workarounds.
All the best,
Kerstin

Logical Standby Creation Problems "Create STatus Unknown"

We are using Grid Control 10.2.0.3 on Oracle 10.2..0.3 databases, Windows 2003 sp2 machines.
We have a primary and fsfo physical standby working properly. We went to create a logical standby on a separate server and had problems. it turned out that the listener on the server was not discovered on the target. we fixed that problem and finished the creation of the logical standby and it seems to be functioning properly now.
However, the status on the data guard page for the logical standby shows Create Status Unknown and we are unable to proceed on to create an additional standby database for other purposes. We have tried removing the logical standby target and re-discovering it but status still shows Create Status Unknown.
Is there any way to clear this status without having to drop the logical standby and completely recreate it.

The status on the agent shows it uploading successfully.
We resolved the issue by removing the logical standby from the configuration and selecting to retain the log apply. We then re-added the standby selecting to manage an existing standby database and the status went to normal.

Date of creation problem after making Bridge create TIFs with PS Image Processor.

I went through about 100 files and did what I wanted in Camera RAW (started out with NEFs). Thereafter I had Bridge make TIFs of all the files in the folder using the PS Image Processor.
Now, looking at the TIF folder in Bridge, I find that about 80 of them has a wrong creation date (I checked the Preferences and I have asked for the date of creation - and not the date of modification). As I watch (several minutes) Bridge changes some of the dates to the ones known to me to be correct - but not all. If I close Bridge, restart Bridge and open the folder again the same happens, i.e. it starts all over. Even stranger is that the Windows Pathfinder have problems with the same files - i.e. does not show the date of creation at all.
The date of these 80 files are all the same - and they have been edited over several days!
I have done a lot of work on those files and would hate to start all over. I checked and of course the dates are the original in the RAW folder that I started out with.
I am sure that I do not have any bugs in my PC.
Can I remedy this i any way? I hate to have wrong dates on my files.
What can I have done to cause this? Can anyone help me? Thanking You in advance.
Git

Thank You again.
Yes, I have also purged the cache. More than once and again this morning. It does not change the result. Bridge still goes from the date January 13th 2013 to the correct date of creation when I look at the separate thumbnails - and back again when I scroll down the page and subsequently scroll up again!
Thus it seems that Bridge knows the date that the camera set but somehow this foolish January date keeps coming back.
All the folders with NEFs have correct dates - also the ones where I have imported the files from camera to pc in 2013! Only my TIFFs have this problem.
Rigth now I am having Norton 360 run a complete system scan. When that is done I will inactivate Norton (I know that I cannot have 2 antivirus softwares and firewalls run simultaneously on the PC) and instead run a complete scan with Lavasoft Adaware Pro. I have also used Norton Utilities and found no problems. Plus Malwarebytes Antimalware and Superantispyware. No problems.
If "date file created" is the date that the file was modified, it would not help me much. I often go back to a file and play with it again and if I have understood correctly, then this date would change again. I want to see the date of capture ("date created"). Also, by now the problem afflicts at least 1000 files. It would be impossible to do single file manual corrections of dates on so many files.
Update: While I have been writing this, an opened folder with only 36 files has changed the dates to the correct date of capture. I could also scroll up and down without the dates changíng in this small folder. But when I closed Bridge, restarted it and looked at the folder again Bridge again did need minutes to get all the dates rigth. Maybe I have a pc capacity problem instead of a software problem? But why on earth would this specific wrong date result from a too weak pc.?
Maybe I should just give up and reinstall PS?
Sorry if I trouble You with a ridiculous problem.
Git

Remote Resources: "A problem with the system proxy caused the connection to fail: End of file"

Hi, I am trying to use "Remote Resources" on the current version of the Microsoft Remote Desktop for Android app, I can input the webfeed and it even shows the apps that I have configured on the server for "Remote App", sadly whenever
I try to load any of the RemoteApps, I receive an error stating " A problem with the system proxy caused the connection to fail. End of File".
I don't know what I can do to fix this, I've tried many things to no avail, also, normal Remote Desktop connections from the Microsoft Android app work flawlessly to the server.
The relevant log is the following:
[2014-Jan-09 04:40:54] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-09 04:40:54] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||ZWaveUtil
remote.workingdirectory
remote.name ZWave Adapter Utility
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost = 200.5.68.10
proxyPort = 8080
sessionId = -1
[2014-Jan-09 04:40:54] RDP (0): Using HttpConnect proxy at 200.5.68.10:8080
[2014-Jan-09 04:40:54] RDP (0): Using Basic Authentication with username ''
[2014-Jan-09 04:40:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
ASIOSocketAdapter (9): readSomething error. message: End of file. instance: 0x5d39d5c0
RpcOverHttp (9): Stream error in endpoint 0x5abbc170 : A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleRead(): exception: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : Failed to read from channel: -1. instance: 0x5d39d5c0
[2014-Jan-09 04:40:55] RDP (0): Disconnect initiated by client
RpcOverHttp (9): Exception in endpoint 0x5abbc170 : Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
    User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-09 04:40:57] RDP (0): ------ END ACTIVE CONNECTION ------

My problem is that the "proxy" is the proxy set up by my 3G configuration so, I tried connecting to the remote resources through my work wifi and I get the following:
[2014-Jan-14 16:58:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 16:58:13] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username Administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=Administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 16:58:13] RDP (0): Not using any proxy
[2014-Jan-14 16:58:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d474090
RpcOverHttp (9): Stream error in endpoint 0x5d46b678 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d445158
RpcOverHttp (9): Stream error in endpoint 0x5d49fa30 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Disconnect initiated by client
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 16:58:17] RDP (0): ------ END ACTIVE CONNECTION ------
Now, I know the host can be resolved because: if I connect to the same host but on a full remote desktop (as opposed to just RemoteApp on it) I have no trouble either through 3G OR through my work connection.
Moreover, I also tried directly inputting the IP as opposed to the web address of my server, I get the same error, that is the Remote Resources tab is able to access the feed (because it shows the available RemoteApps) but when I click an app it says it can't
find the Host, here's the log for the connection directly to the IP address/rdweb/feed/webfeed.aspx :
[2014-Jan-14 17:09:27] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 17:09:27] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 17:09:27] RDP (0): Not using any proxy
[2014-Jan-14 17:09:27] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d372f28
RpcOverHttp (9): Stream error in endpoint 0x5dd6b168 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d378de0
RpcOverHttp (9): Stream error in endpoint 0x5e9cc1f0 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Disconnect initiated by client
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 17:09:31] RDP (0): ------ END ACTIVE CONNECTION ------
I'm really puzzled here, I've tried checking if ports where open, and ports 443 and 3389 are wide open, I don't know what else it could be.

Arabic resource file problem

i use jdeveloper 10.1.3 and windows xp
i developed an hr application
no i want my application to support both english and arabic language
so i used windows notepad to write my resource file in arabic and english
with english it worked good no problems
but when i tried to save the arabic resource file on notepad
i could not save it in ANSI format
so i tried to save the file in a unicode or utf-8 format
the problem is that when i try to a resource file in a format either that ANSI
i does not work except with ANSI FORMAT file with arabic or english
waiting for reply

I think that the solution is to use Unicode utf-8
add this line in the header of every page that content arabic word
<%@ page contentType="text/html; charset=utf-8" %>
and in the ResourceBundle file write in arabic , you will see after compilation that what you had write in arabic became in Unicode.
exemple :
before compilation
Form.label.sndName= الإسم
after comilation
Form.label.sndName= \u0627\u0644\u0625\u0633\u0645
and remember that i sad that you must add
<%@ page contentType="text/html; charset=utf-8" %> in every page that content arabic word
in jsp page write
<bean:message key="Form.label.sndName"/>
if you folowing this concept you will not encounter any problem with javascript validation

CProjects Resource staffing problem

Hi Everybody,
                      Right now we are facing a problem while staffing a resource for a role created. I am getting a error saying "Enter a valid business partner" and "Message was caused by reference object 'Business Partner Link'". What exactly i need to do get rid of the problem. I was trying to create a new resource there in cProjects, even that create resouce area become disabled. What is the solution for this ??
Thanks,
Rajesh.

Hi Sunil,
             I have created the Business Partner in transaction code BP. After that i was trying to add that resource in staffing. Previously i created the candidate directly in cProjects UI instead of creating a Business Partner in transaction BP. At that time i was able to staff the resource, but afterwards that create candidate is also not working. One more thing after creating a business partner in BP, how to link the business partner to a User and Employee. I am not able to get the link in ECC system. But while creating the candidate i have the option of linking the BP with user as well. I am totally confused with all these things.
           And one more after giving the Business Partner number in the staffing search i am able to see the resource name next to the text box. But while assigning i am getting error message saying "Enter a valid Business Partner". I dont understand what is "valid".
Thanks,
Rajesh.

Resource number problem in TRM

Hi guru's
While creation of Resource in TRM ( Task & Resource Management ) by using T.code LTRMS resource is created but the number is not generating..
What should i do, where i need to do the configuration..
Regards
Durga Prasad

Hi Durga,
I guess you mean resource element creation by using Tcode LRSW, which is a wizard (you would get it also from LTRMS), so you're referring to field "Worker number" ? In that case you should populate the field by hand (just give a number to the resource element).
Otherwise could you pls. give some additional info ? The only other number I can think of is the resource element number you can see under the "Resource" folder on LTRMS, and that is a sequential number automatically assigned by the system.
Regards,
Enrico

Resource metering problem

Hi guys,
I am using a 3-node WS 2012 R2 Hyper-V cluster. For all virtual machines I enabled resource metering. However, on a random basis Measure-VM stops displaying numbers, it just returns blank fields instead of values...resource metering is still enabled on a
VM, but all values are empty. This happens to random VMs, while resource metering for all other VMs keeps working properly.
The only workaround is to disable & enable resource metering, however this resets values which is obviously a problem.
Has anyone had this problem?

Dear Susie Ma,
I managed to "catch" one problematic VM.
This is an interesting situation - because this VM is off. Still, resource metering stats should return some values, because they had been collected while VM was working.
I have another VM that is identical to this one in terms of guest OS and resources, and it is also off. This VM does return correct values for RM.
I will copy RM stats for both machines. Problematic VM name is gale-test-vm02, while the working VM name is gale-test-vm05. Guest OS on both VMs is WS2012R2, however as VMs are off I don't think this matters.
problematic VM (gale-test-vm02)
AvgCPU :
AvgRAM :
MinRAM :
MaxRAM :
TotalDisk : 77828
ComputerName : HV-FC1-N3
VMId : 51281bc4-f3f9-4b91-8d85-367374b81e7e
VMName : gale-test-vm02
HardDiskMetrics : {Microsoft.HyperV.PowerShell.VirtualHardDiskMetrics, Microsoft.HyperV.PowerShell.VirtualHardDiskMetrics}
MeteringDuration :
AverageProcessorUsage :
AverageMemoryUsage :
MaximumMemoryUsage :
MinimumMemoryUsage :
TotalDiskAllocation : 77828
AggregatedAverageNormalizedIOPS : 0
AggregatedAverageLatency : 0
AggregatedDiskDataRead : 25464
AggregatedDiskDataWritten : 19059
NetworkMeteredTrafficReport : {}
working VM (gale-test-vm05)
AvgCPU : 1
AvgRAM : 510
MinRAM : 1024
MaxRAM : 1024
TotalDisk : 92164
ComputerName : HV-FC1-N3
VMId : bef46674-d771-4f23-9a36-f533916b60ba
VMName : gale-test-vm05
HardDiskMetrics : {Microsoft.HyperV.PowerShell.VirtualHardDiskMetrics, Microsoft.HyperV.PowerShell.VirtualHardDiskMetrics}
MeteringDuration :
AverageProcessorUsage : 1
AverageMemoryUsage : 510
MaximumMemoryUsage : 1024
MinimumMemoryUsage : 1024
TotalDiskAllocation : 92164
AggregatedAverageNormalizedIOPS : 0
AggregatedAverageLatency : 0
AggregatedDiskDataRead : 24754
AggregatedDiskDataWritten : 37198
NetworkMeteredTrafficReport : {Microsoft.HyperV.PowerShell.VMNetworkAdapterPortAclMeteringReport, Microsoft.HyperV.PowerShell.VMNetworkAdapterPortAclMeteringReport, Microsoft.HyperV.PowerShell.VMNetworkAdapterPortAclMeteringReport,
Microsoft.HyperV.PowerShell.VMNetworkAdapterPortAclMeteringReport}
Are there any suggestions to what I can do in order to further analyze this?

Resource Bundle Problem

I have a funny problem with Resource Bundles:
In the property editor for a Hyperlink object I replaced the text property with the following: #{messages1.MyKey}
I have defined an action on the hyperlink as follows:
public String MyHyperlinkId_action ()
String HyperlinkText = (String)MyHyperlinkId.getText();
String HyperlinkID = MyHyperlinkId.getId();
return null;
getText() returns null since I use the Bundle to set the text. getId() returns the correct Id. If I hardcode the text in the property editor getText() returns that text correctly.
Any idea, what the problem could be??
Many thanks
Tom

Did you modify the hyperlink text property manually or through the property binding wizard. It could be a spelling mistake. Also make sure MyKey is defined in your resource bundle.

Resource central problem

hello I have problem with resource central in Encore, I want to download templates (I dont have them because I have CS4 downloaded, not on DVDs). My first problem was I couldn't even join resource central, but I fixed it by removing config file from Required folder. In my resource central I just can´t see anything other than the news, it seems that entire menu bar is missing. just take a look at screenshots.
I found this here on forum, that's probably how it should look like:
But screenshot from my PC looks like this:
So if you could help me or lead me to solution I would be very glad.
PS> Resource central in Adobe Soundbooth works perfectly, I have Master Collection purchased and installed on my Windows 7.

Thanks for the info but it is actually CS4 that Im having the issue with.
I have an open support ticket with Adobe but as of yet still no luck for a fix.
Have tried updates, recreating the preferences file, reinstallation..... no joy

Resource Creation Problem

Similar Messages

Maybe you are looking for