Resource error. No batch process available. Process terminated
Hi all,
Am getting following error after scheduling the chain in activating the load from ODS(0SAL_DS01) to another Data Targets.
Resource error. No batch process available. Process terminated
Activation of M ecords from DataStore object 0CRM_CT_I terminated
any light on this please
regards
Subba reddy.
Hi
From the description of your problem, I understand that the
activation has taken too long, and that is the reason for the
error RSODSO_PROCESSING 17. By making some adjustments to the
Data Store object parameters, you should be able to activate
the request. Please note and make the following adjustments in
transaction RSODSO_SETTINGS (you can adjust this for each Data
Store object):
1) maximum package size (for activation)
This you should reduce to 10000. Then the package processing would
be less time consuming.
2) maximum wait time for process (for activation)
This could be increased to e.g. 600
3) button "change process parameters"
here the activation is set to be run in backround (which is also
adviced by SAP).
If you want the processes to run in background, you may have to
increase the amount of batchjobs available in your system. Otherwise
the activation can not run in parallel if there are no batchjobs
available. This could also occur because there are other programs
using batchjobs also.
Also could you please check the server group used in RSODSO_SETTINGS
You can make use of the RZ12 for the same. If you adjust these settings
the activation should finish.
Similar Messages
-
Hi, I have always been able to remote into my pc (Win 8.1) using remote desktop. Just recently this stopped working. Either I get a blank screen for about 10 seconds and then it closes or the connection closes immediately. Every time this happens I get error
4005 in the event log; Windows logon process has unexpectedly terminated. It seems the remote desktop stopped working after the last set of Windows updates were applied. But no other web searches indicates anyone else has had this problem recently. I've also
read the Windows Server document or error 4005 which suggests my registry may be corrupt or a service may be stopped but this does not seem to apply to my situation. I'm stumped and without being able to remote into my pc from my office I can't do my job.
Any suggestions would be greatly appreciated.
UPDATE: After installing a new required Windows update and a bunch of optional Windows updates (that I had been ignoring), the problem has been fixed. I'm guessing which ever Windows update broke Remote Desktop was fixed in the latest update(s).Hi arzoo1,
So you have checked the steps mentioned in the article below?
Event ID 4005 — Windows Logon Availability
You may take a try with Dism /online /cleanup-image /resorehealth command and then check if issue insists.
For Windows Update related, please consider system restore or startup repair.
Try to boot into clean boot and then remote again to check if issue insists.
Best regards
Michael Shao
TechNet Community Support -
Error 472 in job queue process + ORA-472: PMON process terminated with err
Hi,
I've an Oracle Database 11g Release 11.1.0.6.0 - 64bit Production With the Real Application Clusters option.
Yesterday instance on node1 crashed.
This is the extract of alert log:
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_pmon_9297.trc (incident=195198):
ORA-00600: internal error code, arguments: [17183], [0x14E251C38], [], [], [], [], [], []
Incident details in: /u01/app/oracle/diag/rdbms/evodb/EVODB1/incident/incdir_195198/EVODB1_pmon_9297_i195198.trc
Sat Jan 22 16:24:47 2011
Trace dumping is performing id=[cdmp_20110122162447]
Sat Jan 22 16:24:50 2011
Sweep Incident[195198]: completed
Sat Jan 22 16:25:00 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_pmon_9297.trc (incident=195199):
ORA-00600: internal error code, arguments: [17183], [0x14E251C38], [], [], [], [], [], []
Incident details in: /u01/app/oracle/diag/rdbms/evodb/EVODB1/incident/incdir_195199/EVODB1_pmon_9297_i195199.trc
Sat Jan 22 16:25:10 2011
Trace dumping is performing id=[cdmp_20110122162510]
Sat Jan 22 16:25:12 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_pmon_9297.trc (incident=195200):
ORA-00600: internal error code, arguments: [17183], [0x14E251C38], [], [], [], [], [], []
Incident details in: /u01/app/oracle/diag/rdbms/evodb/EVODB1/incident/incdir_195200/EVODB1_pmon_9297_i195200.trc
Sat Jan 22 16:25:23 2011
DBRM (ospid: 9310): terminating the instance due to error 472
Sat Jan 22 16:25:23 2011
System state dump is made for local instance
System State dumped to trace file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_diag_16320.trc
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3724_47445977853072)
Sat Jan 22 16:25:23 2011
SUCCESS: diskgroup ARCHIVELOG was dismounted
Sat Jan 22 16:14:22 2011
DDE: Problem Key 'ORA 600 [17183]' was completely flood controlled (0x6)
Further messages for this problem key will be suppressed for up to 10 minutes
Sat Jan 22 16:15:56 2011
Thread 1 advanced to log sequence 171322
Current log# 18 seq# 171322 mem# 0: +ONLINELOG/evodb/onlinelog/group_18.264.729348055
Sat Jan 22 16:15:56 2011
SUCCESS: diskgroup ARCHIVELOG was mounted
Sat Jan 22 16:16:15 2011
SUCCESS: diskgroup ARCHIVELOG was dismounted
Sat Jan 22 16:20:52 2011
Thread 1 advanced to log sequence 171323
Current log# 12 seq# 171323 mem# 0: +ONLINELOG/evodb/onlinelog/group_12.267.729333861
Sat Jan 22 16:20:53 2011
SUCCESS: diskgroup ARCHIVELOG was mounted
Sat Jan 22 16:21:14 2011
SUCCESS: diskgroup ARCHIVELOG was dismounted
Sat Jan 22 16:24:23 2011
DDE: Problem Key 'ORA 600 [17183]' was completely flood controlled (0x2)
Further messages for this problem key will be suppressed for up to 10 minutes
Sat Jan 22 16:24:38 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_pmon_9297.trc (incident=195198):
ORA-00600: internal error code, arguments: [17183], [0x14E251C38], [], [], [], [], [], []
Incident details in: /u01/app/oracle/diag/rdbms/evodb/EVODB1/incident/incdir_195198/EVODB1_pmon_9297_i195198.trc
Sat Jan 22 16:24:47 2011
Trace dumping is performing id=[cdmp_20110122162447]
Sat Jan 22 16:24:50 2011
Sweep Incident[195198]: completed
Sat Jan 22 16:25:00 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_pmon_9297.trc (incident=195199):
ORA-00600: internal error code, arguments: [17183], [0x14E251C38], [], [], [], [], [], []
Incident details in: /u01/app/oracle/diag/rdbms/evodb/EVODB1/incident/incdir_195199/EVODB1_pmon_9297_i195199.trc
Sat Jan 22 16:25:10 2011
Trace dumping is performing id=[cdmp_20110122162510]
Sat Jan 22 16:25:12 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_pmon_9297.trc (incident=195200):
ORA-00600: internal error code, arguments: [17183], [0x14E251C38], [], [], [], [], [], []
Incident details in: /u01/app/oracle/diag/rdbms/evodb/EVODB1/incident/incdir_195200/EVODB1_pmon_9297_i195200.trc
Sat Jan 22 16:25:23 2011
DBRM (ospid: 9310): terminating the instance due to error 472
Sat Jan 22 16:25:23 2011
System state dump is made for local instance
System State dumped to trace file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_diag_16320.trc
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3724_47445977853072)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3650_47673206152336)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (19709_47962498952336)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3715_47239602621584)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3718_47120460606608)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3646_47899813694608)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3671_47700480982160)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3637_47223057443984)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3695_47109627223184)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3679_47262512999568)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3733_46976527121552)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3667_47474016554128)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3669_47585103858832)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3658_47992462539920)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3654_47736794324112)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3686_47295241862288)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3706_47055349939344)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3630_47331091332240)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3713_47194150415504)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3726_47289949199504)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3677_47842172337296)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (19131_47557370236048)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (27091_47096969530512)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3688_47422639070352)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3652_47944422886544)
Sat Jan 22 16:25:23 2011
ORA-1092 : opiodr aborting process unknown ospid (3648_47426149817488)
Sat Jan 22 16:25:24 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_j005_9360.trc:
ORA-00472: PMON process terminated with error
ORA-1092 : opidrv aborting process J005 ospid (9360_47420959304848)
Sat Jan 22 16:25:24 2011
ORA-1092 : opiodr aborting process unknown ospid (18393_47566684101776)
Sat Jan 22 16:25:24 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_j003_7054.trc:
ORA-00472: PMON process terminated with error
ORA-1092 : opidrv aborting process J003 ospid (7054_47244451724432)
Sat Jan 22 16:25:24 2011
ORA-1092 : opiodr aborting process unknown ospid (19719_47840732109968)
Sat Jan 22 16:25:24 2011
ORA-1092 : opiodr aborting process unknown ospid (22184_47575322619024)
Sat Jan 22 16:25:24 2011
ORA-1092 : opiodr aborting process unknown ospid (19721_47679094451344)
Sat Jan 22 16:25:24 2011
ORA-1092 : opiodr aborting process unknown ospid (30170_47106572815504)
Sat Jan 22 16:25:24 2011
ORA-472 : opidrv aborting process S000 ospid (9367_46990649617552)
Sat Jan 22 16:25:24 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_j002_7052.trc:
ORA-00472: PMON process terminated with error
ORA-1092 : opidrv aborting process J002 ospid (7052_47411695402128)
Sat Jan 22 16:25:24 2011
ORA-1092 : opiodr aborting process unknown ospid (18493_47469336738960)
Sat Jan 22 16:25:24 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_j006_10011.trc:
ORA-00472: PMON process terminated with error
ORA-1092 : opidrv aborting process J006 ospid (10011_47836408102032)
Sat Jan 22 16:25:24 2011
ORA-1092 : opiodr aborting process unknown ospid (19714_47958179912848)
Sat Jan 22 16:25:24 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_j007_10289.trc:
ORA-00472: PMON process terminated with error
ORA-1092 : opidrv aborting process J007 ospid (10289_47356480347280)
Sat Jan 22 16:25:24 2011
ORA-1092 : opiodr aborting process unknown ospid (9076_47765392362640)
Sat Jan 22 16:25:24 2011
ORA-1092 : opitsk aborting process
Sat Jan 22 16:25:25 2011
ORA-1092 : opiodr aborting process unknown ospid (22167_47949919177872)
Sat Jan 22 16:25:25 2011
ORA-1092 : opiodr aborting process unknown ospid (24320_47408077532304)
Sat Jan 22 16:25:25 2011
ORA-1092 : opiodr aborting process unknown ospid (22130_47998542101648)
Sat Jan 22 16:25:25 2011
ORA-472 : opidrv aborting process N000 ospid (14774_47466200525968)
Sat Jan 22 16:25:25 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_q000_14701.trc:
ORA-00472: PMON process terminated with error
ORA-1092 : opidrv aborting process Q000 ospid (14701_47693688122512)
Sat Jan 22 16:25:25 2011
ORA-1092 : opiodr aborting process unknown ospid (18386_47900707175568)
Sat Jan 22 16:25:25 2011
ORA-1092 : opiodr aborting process unknown ospid (27553_46921398619280)
Sat Jan 22 16:25:26 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_j001_7050.trc:
ORA-00472: PMON process terminated with error
ORA-1092 : opidrv aborting process J001 ospid (7050_47290016251024)
Sat Jan 22 16:25:26 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_o001_5297.trc:
ORA-00472: PMON process terminated with error
ORA-1092 : opidrv aborting process O001 ospid (5297_47702958673040)
Sat Jan 22 16:25:26 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_o000_5277.trc:
ORA-00472: PMON process terminated with error
ORA-1092 : opidrv aborting process O000 ospid (5277_47599668255888)
Sat Jan 22 16:25:26 2011
ORA-1092 : opiodr aborting process unknown ospid (19745_47560156560528)
Sat Jan 22 16:25:26 2011
ORA-1092 : opiodr aborting process unknown ospid (27044_47388543339664)
Sat Jan 22 16:25:26 2011
Errors in file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_j004_7061.trc:
ORA-00472: PMON process terminated with error
ORA-1092 : opidrv aborting process J004 ospid (7061_47341656689808)
Sat Jan 22 16:25:27 2011
ORA-1092 : opiodr aborting process unknown ospid (14431_47662297960112)
Sat Jan 22 16:25:27 2011
ORA-1092 : opiodr aborting process unknown ospid (14433_47826608635568)
Sat Jan 22 16:25:31 2011
ORA-1092 : opitsk aborting process
Sat Jan 22 16:25:32 2011
License high water mark = 269
Instance terminated by DBRM, pid = 9310
USER (ospid: 10539): terminating the instance
Instance terminated by USER, pid = 10539
Sat Jan 22 16:25:49 2011
Starting ORACLE instance (normal)
This is the trace /u01/app/oracle/diag/rdbms/evodb/EVODB1/incident/incdir_195200/EVODB1_pmon_9297_i195200.trc
(the one regarding the error DBRM (ospid: 9310): terminating the instance due to error 472)
Oracle Database 11g Release 11.1.0.6.0 - 64bit Production
With the Real Application Clusters option
ORACLE_HOME = /u01/app/oracle/product/11.1.0/db1
System name: Linux
Node name: dcsrv-evodb01
Release: 2.6.18-164.10.1.el5
Version: #1 SMP Wed Dec 30 18:35:28 EST 2009
Machine: x86_64
Instance name: EVODB1
Redo thread mounted by this instance: 1
Oracle process number: 2
Unix process pid: 9297, image: oracle@dcsrv-evodb01 (PMON)
*** 2011-01-22 16:25:12.984
*** SESSION ID:(884.1) 2011-01-22 16:25:12.984
*** CLIENT ID:() 2011-01-22 16:25:12.984
*** SERVICE NAME:(SYS$BACKGROUND) 2011-01-22 16:25:12.984
*** MODULE NAME:() 2011-01-22 16:25:12.984
*** ACTION NAME:() 2011-01-22 16:25:12.984
Dump continued from file: /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_pmon_9297.trc
ORA-00600: internal error code, arguments: [17183], [0x14E251C38], [], [], [], [], [], []
+========= Dump for incident 195200 (ORA 600 [17183]) ========+
----- Beginning of Customized Incident Dump(s) -----
And this is the trace /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_j005_9360.trc
(the one regarding the error ORA-00472: PMON process terminated with error)
Trace file /u01/app/oracle/diag/rdbms/evodb/EVODB1/trace/EVODB1_j005_9360.trc
Oracle Database 11g Release 11.1.0.6.0 - 64bit Production
With the Real Application Clusters option
ORACLE_HOME = /u01/app/oracle/product/11.1.0/db1
System name: Linux
Node name: dcsrv-evodb01
Release: 2.6.18-164.10.1.el5
Version: #1 SMP Wed Dec 30 18:35:28 EST 2009
Machine: x86_64
Instance name: EVODB1
Redo thread mounted by this instance: 1
Oracle process number: 95
Unix process pid: 9360, image: oracle@dcsrv-evodb01 (J005)
*** 2011-01-22 16:25:24.057
*** SESSION ID:(649.45863) 2011-01-22 16:25:24.057
*** CLIENT ID:() 2011-01-22 16:25:24.057
*** SERVICE NAME:(SYS$USERS) 2011-01-22 16:25:24.057
*** MODULE NAME:() 2011-01-22 16:25:24.057
*** ACTION NAME:() 2011-01-22 16:25:24.057
error 472 in job queue process
ORA-00472: PMON process terminated with error
My questions are:
- how can I discover the nature of the ORA-00600: internal error code, arguments: [17183], [0x14E251C38], [], [], [], [], [], []?
- what does error 472 in job queue proces mean?
- is it normal the the error 472 in job queue proces crash the instance?
Thanks in advanca for any kind of help!
Samuel>
how can I discover the nature of the ORA-00600: internal error code, arguments: [17183], [0x14E251C38], [], [], [], [], [], []?
>
ORA-00600 should be reported to oracle. Only they know the meaning.
Regards,
- wiZ -
ERROR MESSAGE sap system manager:work process restarted, session terminated
Hi,
i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue. Here are the details
SAP Version :ideas 4.7
Database :Oracle
OS : windows 2003
Module user is working on MM
user working on it is a Super user with all the permissions
SAP is configure to run under the European date and decimal format.
I have never done any database administration on it, it is a new install and has been rarely used.
User creates a RFQ and when he tries saving it , seems like for the first time after either restarting the macine or restarting the service it might work and at time it might not, this is a very sporadic error and most of the times it crashes out with the message "sap system manager:work process restarted, session terminated" and kicks the user out of the session.
Below are the details of the error message from ST22 :
name of the runtime error : system_core_dumped
below are the details of the error message and its resoltion as suggested by sap help :
========
Runtime Errors SYSTEM_CORE_DUMPED
Occurred on 01.02.2008 at 07:52:19
Process terminated by signal " ".
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPLCLSC" had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An SAP System process was terminated by an operating system signal.
Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
Last error logged in SAP kernel
Component............ "Taskhandler"
Place................ "SAP-Server server1_DEV_00 on host server1 (wp 1)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 9555
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. " "
Application server....... " "
Network address.......... " "
Operating system......... " "
Release.................. " "
Hardware type............ " "
Character length......... " " Bits
Pointer length........... " " Bits
Work process number...... " "
Short dump setting....... " "
Database server.......... " "
Database type............ " "
Database name............ " "
Database owner........... " "
Character set............ " "
SAP kernel............... " "
Created on............... " "
Created in............... " "
Database version......... " "
Patch level.............. " "
Patch text............... " "
Supported environment....
Database................. " "
SAP database version..... " "
Operating system......... " "
User, transaction...
Client.............. " "
User................ " "
Language key........ " "
Transaction......... "ME41 "
Program............. "SAPLCLSC"
Screen.............. "SAPMM06E 0320"
Screen line......... 71
Information on where termination occurred
The termination occurred in the ABAP program "SAPLCLSC" in "EXECUTE_SELECT".
The main program was "SAPMM06E ".
The termination occurred in line 131 of the source code of the (Include)
program "LCLSCF2G"
of the source code of program "LCLSCF2G" (when calling the editor 1310).
=============
i even tried increasing the dialog processes but with no use.The same error occurs.
I appreciate every one of help i can get, i am working on a deadline which is tomorrow evening to resovle this issue, any kind of help is highly appreciated.
thanks
mudessir.Hi
follow correction method suggested in this dump,
" The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'. Save this file under another name."
have you done this?
with regards,
raj.
<i>pls, award points</i> -
Error:- No server was available to process the request. Please try again la
Hi All,
I have created a report in deskI and trying to execute it through WebI on a large database, but it gives the below mentioned error after almost 30 min.
Error:- No server was available to process the request. Please try again later. (Error:RFC 00101)(Error:INF)...
When I run the same report on small database it works fine.
When trying to execute the same report through SDK also it gives the same error.
The SQL only execution timing when the report fails is about 23 min.
What is the reason for this error. can we fix it by changing some configurations on BOXI server.
Thanks in Advance,Hi Prabhat,
Following solution might be helpful in resolving the issue.
To resolve the error message
Log on to the Central Management Console as administrator.
Click Servers > Desktop Intelligence Report Server.
Increase the following time-out parameters to at least twice the current value:
Minutes before Idle connection is closed
Minutes before an idle report job is closed
Click Update > Apply.
The report opens successfully.
Regards,
Sarbhjeet Kaur -
Dear All,
i am getting below error in RWB in receiver Channel
Error
"Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when attempting to get processing resources: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection to URL 'CONNECTION STRING: NoClassDefFoundError: sun.awt.X11GraphicsEnvironment (initialization failure)"
Note: outbound has processed succesfully in both ABAP and Java Stack.Hi,
Can you please let us know, which receiver adapter are you using??
I guess it is JDBC: IF it is ...can you check the Driver and Connection details maintained on the channel.
JDBC Driver:com.microsoft.sqlserver.jdbc.SQLServerDriver
CONNECTION:jdbc:sqlserver://IP ADDRESS:PORT;Database=HOST NAME;
-Rahul -
Error in batch processing: background job cannot be scheduled
Error in batch processing: background job cannot be scheduled in transaction code jpmg0. How to resolve the same?
Hello,
Check system log and also check work process trace, to know the error.
I feel that it could be Authorization issue, you don't have sufficient authorization to do.
Hope this helps.
Regards
venkata
Edited by: venkata emandi on Sep 12, 2011 8:13 AM -
An error has occurred: "Failed to process the request."
I try to make a deploy and this error appears:
[code]An error has occurred:
"Failed to process the request."
Please contact your system administrator.
Hide details
Web Dynpro client:
HTML Client
Web Dynpro client capabilities:
User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Web Dynpro runtime:
Product: null, Vendor: null, Version: null, Build ID: 6.3007.00.0000.20040726091658.0000 (release=630_VAL_REL, buildtime=2004-07-29:21:25:09[UTC], changelist=267691, host=PWDFM026), Build Date: Fri May 06 16:36:04 VET 2005
Web Dynpro code generators of DC local/PruebasEstilos:
SapDictionaryGenerationCore: 6.4014.00.0000.20050818151336.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:08:16[UTC], changelist=363802, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4014.00.0000.20050818152356.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:11:31[UTC], changelist=363818, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4014.00.0000.20050818152303.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:02:18[UTC], changelist=363816, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4014.00.0000.20050905165427.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:26:46[UTC], changelist=366934, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4014.00.0000.20050905165427.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:26:46[UTC], changelist=366934, host=PWDFM026)
SapGenerationFrameworkCore: 6.4014.00.0000.20050818152155.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:01:32[UTC], changelist=363812, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4014.00.0000.20050818152737.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:15:40[UTC], changelist=363825, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4014.00.0000.20050606171352.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:05:38[UTC], changelist=351719, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4014.00.0000.20050818152303.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:02:26[UTC], changelist=363816, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4014.00.0000.20050818152737.0000 (release=630_VAL_REL, buildtime=2005-09-09:20:16:08[UTC], changelist=363825, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: (unknown)
Web Dynpro code generators of DC sap.com/tcwddispwda:
No information available
Web Dynpro code generators of DC sap.com/tcwdcorecomp:
No information available
J2EE Engine:
No information available
Java VM:
Java HotSpot(TM) Server VM, version: 1.4.2_08-b03, vendor: Sun Microsystems Inc.
Operating system:
Windows XP, version: 5.1, architecture: x86
Error stacktrace:
java.lang.NoClassDefFoundError: com/sap/tc/webdynpro/progmodel/gci/IGCIComponentDelegate
Loader Info -
ClassLoader name: [local/PruebasEstilos]
Parent loader name: [Frame ClassLoader]
References:
common:service:http;service:servlet_jsp
service:ejb
common:service:iiop;service:naming;service:p4;service:ts
service:jmsconnector
library:jsse
library:servlet
common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl
library:ejb20
library:j2eeca
library:jms
library:opensql
common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:com.sap.security.core.ume.service;service:connector;service:dbpool;service:keystore;service:security;service:userstore
interface:resourcecontext_api
interface:webservices
interface:ejbserialization
sap.com/tcwddispwda
sap.com/tcwdcorecomp
service:webdynpro
service:sld
library:tcddicddicservices
library:com.sap.aii.proxy.framework
library:tcgraphicsigs
library:com.sap.mw.jco
library:com.sap.lcr.api.cimclient
library:sapxmltoolkit
library:com.sap.aii.util.rb
library:com.sap.util.monitor.jarm
library:tcddicddicruntime
library:com.sap.aii.util.xml
library:tccolapi
library:com.sap.aii.util.misc
library:tc~cmi
library:tccolruntime
Resources:
C:\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\local\PruebasEstilos\webdynpro\public\lib\app.jar
Loading model: {parent,references,local}
The error occurred while trying to load "sap.wdp.InternalTest1".
at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:328)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.<init>(DelegatingComponent.java:40)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doInit(ClientComponent.java:775)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:329)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:356)
at com.sap.tc.webdynpro.clientserver.task.Task.createApplication(Task.java:219)
at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:547)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:57)
at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:251)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:139)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:101)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:38)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:337)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:315)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:815)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:238)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:151)
[/code]
I don't know what does it mean, I will appreciate it any helpfull information as soon as possible(urgent).
TokioHi, Armin
In fact I'm using NWDS SP14 but I don't know what is the version of Web AS.
I was reading and posting few days ago some question about install and uninstall Web AS, J2EE Server, etc. I could do something but just when I' trying to deploy and run NWDS Application that error occurred.
Well, I supose in this case I have to install a new version of Web AS, from the "SDN Download Catalog" what I must to do? ...
In Download - Sneak Preview SAP NetWeaver page, what exactly I have to download to install:
<i>Download file 1 (1.9GB)
Download file 2 (1.9GB)
Download file 3 (.5GB)
Download file 4 (.8GB)</i> ?
Thanks for your help...
Tokio -
PP-PI - Process message processing and batch management in PI_CONS message
Hi All,
Hope you can help me to find the better solution... I will try to explain my scenario
Scenario: to control the production run PP-PI module is in use. Process order are created in SAP system and then transferred to the process control system where the execution of the process order is controlled On-line. Once per month the confirmations are transferred from this control system to SAP. In the Process control system batch are not managed. For good issue posting standard process message PI_CONS is used.
Now we have the situation that some raw materials used for process order processing are managed with batch. During the process order creation the batch related with this raw materials can be determined, only during the month when the raw material is entered in the plant is where the batch is determined. At the end of the month the batch of this materials is available in the SAP system (not in the process control system). Due to behavior of PI_CONS regarding batch if this characteristic is not informed in the process message or in the reservation an issue is trigger.My doubts are:
1.- If I need inform the batch during this confirmation ,an even split the quantities in the process message according the batch availability, I'm force to use a custom process message or there is other workaround? (remember is not feasible send the batch to the process control system)
2.- probably i miss something because I'm can't debug the execution of the process message. How can I debug the execution of a manually created process message?
Sorry for the long explanation I try to explain my scenario as better as possible.
Thanks in advance for your valuable inputs.Thanks for your replay.
No really I don't like to make the batch mandatory, during the good issue is not feasible inform the batch due to it is not managed in the Process Control System. Due to the behavior of PI_CONS if for batch managed materials the batch is not informed in the message or in the reservation an error is trigger. In the reservation snot feasible inform the batch because in that moment is unknown.
My question is if it is feasible some how have like FIFO batch determination when the process message is processed without creating a custom message.
Thanks in advance -
Error ORA-04030: out of process memory when trying to allocate 8512 bytes
Good Afternoon estimated
I want to see if anyone has the following problem occurred while there are about 70 concurrent connections to the Oracle instance. if anyone has any solution.
is grateful for the help in advance:
Dump file d:\oracle\data\admin\ppmdb\bdump\ppmdb_mmon_5032.trc
Thu Aug 11 09:23:40 2011
ORACLE V10.2.0.4.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the OLAP, Data Mining and Real Application Testing options
Windows NT Version V5.2 Service Pack 2
CPU : 8 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:5642M/8181M, Ph+PgF:17775M/20246M, VA:9M/2047M
Instance name: DBMM
Redo thread mounted by this instance: 1
Oracle process number: 11
Windows thread id: 5032, image: ORACLE.EXE (MMON)
*** 2011-08-11 09:23:40.429
*** SERVICE NAME:(SYS$BACKGROUND) 2011-08-11 09:23:40.413
*** SESSION ID:(161.1) 2011-08-11 09:23:40.413
*** KEWROCISTMTEXEC - encountered error: (ORA-04030: out of process memory when trying to allocate 8512 bytes (pga heap,kgh stack)
*** SQLSTR: total-len=267, dump-len=240,
STR={insert into wrh$_sysmetric_history (snap_id, dbid, instance_number, begin_time, end_time, intsize, group_id, metric_id, value) select :snap_id, :dbid, :instance_number, begtime, endtime, intsize_csec, groupid, metri}
===============
Note: This allows us to continue to connect more users and the only way to make new connections is restarting the instance
I Have Configurate: pga_aggregate_target integer 379584512
Total System Global Area 1577058304 bytes
Fixed Size 1299216 bytes
Variable Size 729812208 bytes
Database Buffers 838860800 bytes
Redo Buffers 7086080 bytes
Thank you for your possible help
Claudio T.804135 wrote:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
Windows NT Version V5.2 Service Pack 2
Memory (Avail/Total): Ph:5642M/8181M, Ph+PgF:17775M/20246M, VA:9M/2047M
I Have Configurate: pga_aggregate_target integer 379584512
Total System Global Area 1577058304 bytesHave a search on this forum (or google) for the error code, there should be lots of previous discussion on this one.
From no sign of 64-bit in the product banner plus VA (address space) 2 GB (close enough), it looks like the server is running as 32-bit process.
With SGA + PGA (target) adding up to nearly 1900 MB, my guess is you are hitting the 2 GB per process limit.
Lower SGA, it should help in the very short term. For longer term: lower resource demands or start planning for migration to 64-bit. -
Issues during Component Batch Determination for Process Orders
Hi,
I am encountering a strange issue during component batch determination of process order.
1. During creation of process order, when I execute batch determination, systems does determination based on strategies we have set and when I click on Copy it gives an error
"Log cannot be saved: Object/subobject not specified"
Message no. BL201
*Diagnosis
Log save cancelled because at least one log contains no object or subobject.
Object and subobject are needed to classify application logs because there are several log types. Only a few logs are managed in main memory at runtime, so this classification is not needed.
If the logs are to be saved in the database, object/subobject must be specified for later retrieval.
Procedure for System Administration
Object/sub object can be passed when a log is created (function module BAL_LOG_CREATE) and changed with BAL_LOG_CHANGE.
The possible values for object and sub object must be configured in transaction SLG0.*
If I save the order with CRTD status and come back again in change mode and do determination, It works fine.
Again when the order is in REL status and do the determination, It gives the same error.
This happens only for a specific plant, In other plants batch determination works in all scenarios.
I checked for all plant related Config for batch determination and coudn't find any discrepancies.
Please advise how to resolve this issue. Thanks in advance for your help
Regards,
AheeshThere Is no direct solution for your requirement just try this work around.
While defining the batch determination search strategy for process order in COB1, there is one column Quantity proposal where you can attach the Routines (This is written in ABAB code ) make use of this, define New Routines with ABAB help to fulfill your requirement. Try this if found useful award full points.
Regards,
Ajay Nikte -
Error: 1056603 Unable to spawn process for application [AppName]
Hi,
After a fresh installation of Essbase Server (11.1.1.4), I'm experiencing the following error when attempting to perform basically any action on any Application (Start, Stop, Delete) through EAS:
*Error: 1056603 Unable to spawn process for application [Demo]. Please ensure that adequate memory is available.*
System memory seems abundant at around 5% usage with all relevant services started, but I even doubled it (since it's a VM) to 16Gb just to make sure, the issue persists.
Having a look at the Essbase server log, I didn't find any additional info that could be helpful:
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///2412/Info(1051160)
Received Validate Login Session request
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///2380/Info(1051001)
Received client request: Get App and Database Status (from user [admin])
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///568/Info(1051001)
Received client request: MaxL: Execute (from user [admin])
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///568/Error(1056603)
Unable to spawn process for application [Demo]. Please ensure that adequate memory is available.
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///568/Error(1054001)
Cannot load application Demo with error number [1056603] - see server log file
[Thu Oct 11 15:07:03 2012]Local/ESSBASE0///568/Warning(1051003)
Error 1054001 processing request [MaxL: Execute] - disconnecting
And when the Essbase service is started, essbase.log also seems to be pretty normal:
[Thu Oct 11 15:18:13 2012]Local/ESSBASE0///2376/Info(1051001)
Received client request: Logout (from user [admin])
[Thu Oct 11 15:18:13 2012]Local/ESSBASE0///2376/Info(1051037)
Logging out user [admin], active for 29 minutes
[Thu Oct 11 15:18:19 2012]Local/ESSBASE0///1236/Info(1051243)
Exclusive operation security file compaction started. This may take a while
[Thu Oct 11 15:18:19 2012]Local/ESSBASE0///1236/Info(1051244)
Security file compaction completed
[Thu Oct 11 15:18:19 2012]Local/ESSBASE0///1236/Info(1051052)
Essbase Server - finished
[Thu Oct 11 15:18:23 2012]Local/ESSBASE0///2620/Info(1051283)
Retrieving License Information Please Wait...
[Thu Oct 11 15:18:23 2012]Local/ESSBASE0///2620/Info(1051286)
License information retrieved.
[Thu Oct 11 15:18:29 2012]Local/ESSBASE0///2620/Info(1051199)
Single Sign-On Initialization Succeeded !
[Thu Oct 11 15:18:29 2012]Local/ESSBASE0///2620/Info(1051232)
Using English_UnitedStates.Latin1@Binary as the Essbase Locale
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2620/Info(1051134)
External Authentication Module: [Single Sign-On] enabled
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2620/Info(1051051)
Essbase Server - started
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2620/Info(1051243)
Exclusive operation security file compaction started. This may take a while
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2620/Info(1051244)
Security file compaction completed
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2620/Info(1051052)
Essbase Server - finished
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2120/Info(1051283)
Retrieving License Information Please Wait...
[Thu Oct 11 15:18:34 2012]Local/ESSBASE0///2120/Info(1051286)
License information retrieved.
[Thu Oct 11 15:18:37 2012]Local/ESSBASE0///2120/Info(1051199)
Single Sign-On Initialization Succeeded !
[Thu Oct 11 15:18:37 2012]Local/ESSBASE0///2120/Info(1051232)
Using English_UnitedStates.Latin1@Binary as the Essbase Locale
Any ideas on what may be causing this?
Thanks in advance!
nHi Nelson,
Did you try increasing the Heap size for EAS ? Try the following and check if you still get the error -
increase the Java heap settings in the EAS script on a Unix platform that was configured using the automatic deployment method, do the following:
1. Navigate to the $HYPERION_HOME/deployments/{appserver}/bin directory.
2. Edit the setCustomParamseas.sh(.bat) script.
3. Modify or add the -Xms and -Xmx settings to the JAVA_OPTIONS variable. For example:
+JAVA_OPTIONS="-Xms256m -Xmx1024m -DComponentName=eas -DcomponentId=1e3bf92b2d9bb0493bcd3380127b0ca49ee7f50 -Dsun.net.inetaddr.ttl=0 -DHYPERION_HOME=/usr/local/oracle/hyperion -Dhyperion.home=/usr/local/oracle/hyperion -DEAS_HOME=/usr/local/oracle/hyperion/products/Essbase/eas -DESS_ES_HOME=/usr/local/oracle/hyperion/products/Essbase/eas/server -DEAS_LOG_LEVEL=5000 -DEAS_LOG_LOCATION=/usr/local/oracle/hyperion/logs/eas/easserver.log -DCLIENT_SERVER_DIFF_MC=true -Dweblogic.j2ee.application.tmpDir=/usr/local/oracle/hyperion/deployments/temp -Djava.io.tmpdir=/usr/local/oracle/hyperion/tmp ${JAVA_OPTIONS} "+
+*Note: For Tomcat deployments, the setting to modify is JAVA_OPTS:*+
+*JAVA_OPTS="-Xms256m -Xmx1024m*+
4. Stop and restart EAS for the setting to take effect.
Hope it helps....
KosuruS -
CRM 2011+An error has occurred during report processing. (rsProcessingAborted)
Hi,
i have installed CRM 2011 on-premise version in Server A. Database and CRM 2011 Reporting Extenison in Server B. Both the server are 64 bit server and IIS 7.0 . i can able to browse the Report server url. USer as been added in Sql DB Logins and
as permission to Reportserver and ReportservertempDB.
i can able to access the CRM Reports only using Admin Credenttials that is from the credential which Report server is installed and configured
Error in server 1:
Web service request SetDataSourceCredentials to Report Server
(http://servername/Reportserver_XXXSQLSRVR)failed with SoapException. Error: An error has occurred during report processing. (rsProcessingAborted).
Error in Server 2: took this error From error log file
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: Data source 'CRM': An error has occurred. Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'. ---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException:
Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: An exception has occurred in data source 'CRM'. Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'. ---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException:
Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: i INFO: DataPrefetch abort handler called for Report with ID=. Aborting data sources ...
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing., ;
Info: Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'.
---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException: Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
Eventvwr error in server 2:
Failed to unload app domain DefaultDomain. The following exception occurred: Error while unloading appdomain. (Exception from HRESULT: 0x80131015).
I tried the Following ways to fix it
1.added User as content manager
2.In CRM apppool i have Admin in identity column
its really paining when i'm unable to access the CRM 2011 Default Reports. got stucked for a day.
Thanks, Saraswathy KumaraveluHi All,
I encountered this same issue today after installing CRM 2011.
CRM 2011 on Server A
SQL and SSRS 2008 R2 on Server B
I found that I got the same errors described here when running the standard reports even after I had installed the Reporting Extension (CRM 2011 replacement for CRM 4.0 Data Connector). The reason I got the error was because the 'Data Source Type' had not
been updated in Report Manager.
Here's how I resolved:
1. Browse to Report Manager (http://SERVERB/Reports)
2. Open the Organisation_MSCRM folder
3. Click Show Details
4. Open the MSCRM_DataSource
5. Change the Data Source Type from Microsoft SQL Server
to Microsoft Dynamics CRM SQL
*Note: - This option is only available once Reporting Extension has been installed on SSRS Server.
6. Clear the contents of the Connection String box
7. Set the Connect Using: option to Credentials Supplied by user running the report
but do NOT check the
Use as Windows Credentials when connecting to the DataSource option.
8. Click Apply
9. Restart the SQL Reporting Services Service in
Reporting Services Configuration Manager
10. Test by running one of the Standard CRM Reports (e.g. User Summary)
Ta Da!! - Success!!
Hope this helps! -
Warning Error message while scheduling the Process Chain
Dear All,
I have created the meta Chain, which contains 7 Local Chains. I have tested this chain in BI Development and Quality. It was working fine. I have moved this Meta Chain to production. While i am trying to schedule this chain, i got the warning message.
Too many parallel processes for chosen server BICI
Message no. RSPC118
Diagnosis
On the server TVSBICI you have chosen, there are only 0 batch processes available. The process chain has been designed in such as way that 3 processes must be processed parallel.
System Response
Only 0 processes can be processed parallel. Note also that to be able to start sub-chains, AT LEAST TWO free batch processes must be available. Otherwise a lock situation may arise.
For more information, see SAP Note 621400.
Procedure
Reduce the number of parallel processes in the chain or include sub- chains. This warning applies to all relevant processes.
Procedure for System Administration
Increase the number of batch processes available. You should note however that it makes no sense to set up more batch processes than there are CPUs on server BICI.
Pls help on this issue.
Thanks,
Siva.
Edited by: Siva Kumar on Jun 15, 2009 9:16 AMI have Ignored this warning and now process Chain is working fine.
Thanks,
Siva. -
How to find out number of background work processe available in the system?
Hi All,
I have a FM that triggers a background job using JOB_OPEN, ABAP_SUBMIT and JOB_CLOSE. But the problem is if there are no background work processes available at that moment, it does not return error. Not sure whether the job is even scheduled!
Is there a way to find out if there are any background work processes available in the system? I know a FM SPBT_INITIALIZE which gives info about dialog work processes. Is there any other FM similar to this which gives info about background wp??
Regards,
Shaileshyour Job will remain in a queue by message handler. once workprocess is free, your job gets scheduled
by the way, you can use the functionality used in FM TH_DISPLAY_WORKPROCESS_LIST to read the workprocesses
the command which gets you the workprocess is:
CALL 'ThWpInfo' ID 'OPCODE' FIELD OPCODE_WP_LIST
ID 'TAB' FIELD LIST_STATE_WPLST-TABL
ID 'CPU' FIELD LIST_STATE_WPLST-CPU.
check how its written in include LSDEBF01, form SET_LIST_WPLST
Edited by: Soumyaprakash Mishra on Dec 12, 2011 12:17 PM
Maybe you are looking for
-
Issue regarding cell action in webdynpro for abap alv
hello gurus, i have one requirement in webdynpro for abap alv.i have one alv table in that i have one coloun employee name. for that i have provided F4 help and that is editable field.if i select value from F4 help it is getting value correctl
-
How to put Check Boxes and Radio button in Smartforms
Hi all, How to put check Box and radio button in Smartforms ............ from web properties there is an option to use. But How to use. regards, Mohsin
-
Hi All, I am currently working on a XML-RPC related program which plays sound on the server using JMF. The funniest thing is that if I ssh to the server with X session enabled, for example, in linux, I go "ssh -Y root@server" and then run the program
-
New phone; calendar sync no probs - contacts sync isn't happening
Sorry if this is old news... I have searched but cannot find the answer. I have selected the 'sync contacts and calendar with Outlook' but only the calendar worked so far. The option to select a sub-folder in contacts is visible but I cannot select i
-
hai friends i have created on BAPI to FBCJ it is used to RECEIPT FROM BANK & PAYMENT TO BANK and its working fine i have created one RFC to posting the data. it posted only one record but i want to post all records. please rectif